target/arm: Implement MVE VRINT insns

Implement the MVE VRINT insns, which round floating point inputs
to integer values, leaving them in floating point format.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE VCVT between single and half precision

Implement the MVE VCVT instruction which converts between single
and half precision floating point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE VCVT with specified rounding mode

Implement the MVE VCVT which converts from floating-point to integer
using a rounding mode specified by the instruction.  We implement
this similarly to the Neon equivalents, by passing the required
rounding mode as an extra integer parameter to the helper functions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE VCVT between fp and integer

Implement the MVE "VCVT (between floating-point and integer)" insn.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE VCVT between floating and fixed point

Implement the MVE VCVT insns which convert between floating and fixed
point.  As with the Neon equivalents, these use essentially the same
constant encoding as right-shift-by-immediate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE fp scalar comparisons

Implement the MVE fp scalar comparisons VCMP and VPT.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE fp vector comparisons

Implement the MVE fp vector comparisons VCMP and VPT.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE FP max/min across vector

Implement the MVE VMAXNMV, VMINNMV, VMAXNMAV, VMINNMAV insns.  These
calculate the maximum or minimum of floating point elements across a
vector, starting with a value in a general purpose register and
returning the result there.

The pseudocode silences a possible SNaN in the accumulating result
on every iteration (by calling FPConvertNaN), but we do it only
on the input ra, because if none of the inputs to float*_maxnum
or float*_minnum are SNaNs then the result can't be an SNaN.

Note that we can't use the float*_maxnuma() etc functions we defined
earlier for VMAXNMA and VMINNMA, because we mustn't take the absolute
value of the starting general-purpose register value, which could be
negative.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Remove assertion preventing silencing of NaN in default-NaN mode

In commit a777d6033447a we added an assertion to parts_silence_nan() that
prohibits calling float*_silence_nan() when in default-NaN mode.
This ties together a property of the output ("do we generate a default
NaN when the result is a NaN?") with an operation on an input ("silence
this input NaN").

It's true that most of the time when in default-NaN mode you won't
need to silence an input NaN, because you can just produce the
default NaN as the result instead.  But some functions like
float*_maxnum() are defined to be able to work with quiet NaNs, so
silencing an input SNaN is still reasonable.  In particular, the
upcoming implementation of MVE VMAXNMV would fall over this assertion
if we didn't delete it.

Delete the assertion.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE fp-with-scalar VFMA, VFMAS

Implement the MVE fp-with-scalar VFMA and VFMAS insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE scalar fp insns

Implement the MVE scalar floating point insns VADD, VSUB and VMUL.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Implement MVE VMAXNMA and VMINNMA

Implement the MVE VMAXNMA and VMINNMA insns; these are 2-operand, but
the destination register must be the same as one of the source
registers.

We defer the decode of the size in bit 28 to the individual insn
patterns rather than doing it in the format, because otherwise we
would have a single insn pattern that overlapped with two groups (eg
VMAXNMA with the VMULH_S and VMULH_U groups). Having two insn
patterns per insn seems clearer than a complex multilevel nesting
of overlapping and non-overlapping groups.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement MVE VCMUL and VCMLA

Implement the MVE VCMUL and VCMLA insns.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement MVE VFMA and VFMS

Implement the MVE VFMA and VFMS insns.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement MVE VCADD

Implement the MVE VCADD insn.  Note that here the size bit is the
opposite sense to the other 2-operand fp insns.

We don't check for the sz == 1 && Qd == Qm UNPREDICTABLE case,
because that would mean we can't use the DO_2OP_FP macro in
translate-mve.c.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement MVE VSUB, VMUL, VABD, VMAXNM, VMINNM

Implement more simple 2-operand floating point MVE insns.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement MVE VADD (floating-point)

Implement the MVE VADD (floating-point) insn.  Handling of this is
similar to the 2-operand integer insns, except that we must take care
to only update the floating point exception status if the least
significant bit of the predicate mask for each element is active.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw: Add compat machines for 6.2

Add 6.2 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3: Replace mis-used MEMTX_* constants by booleans

Quoting Peter Maydell:

  These MEMTX_* aren't from the memory transaction API functions;
  they're just being used by gicd_readl() and friends as a way to
  indicate a success/failure so that the actual MemoryRegionOps
  read/write fns like gicv3_dist_read() can log a guest error.
  Arguably this is a bit of a misuse of the MEMTX_* constants and
  perhaps we should have gicd_readl etc return a bool instead.

Follow his suggestion and replace the MEMTX_* constants by
boolean values, simplifying a bit the gicv3_dist_read() /
gicv3_dist_write() handlers.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210826180704.2131949-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_dist: Rename 64-bit accessors with 'q' suffix

QEMU load/store API (docs/devel/loads-stores.rst) uses the 'q'
suffix for 64-bit accesses. Rename the current 'll' suffix to
have the GIC dist accessors better match the rest of the codebase.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210826180704.2131949-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/raspi: Remove deprecated raspi2/raspi3 aliases

Remove the raspi2/raspi3 machine aliases,
deprecated since commit 155e1c82ed0.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210827060815.2384760-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests: Remove uses of deprecated raspi2/raspi3 machine names

Commit 155e1c82ed0 deprecated the raspi2/raspi3 machine names.
Use the recommended new names: raspi2b and raspi3b.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210827060815.2384760-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210901-2' into staging

First RISC-V PR for QEMU 6.2

 - Add a config for Shakti UART
 - Fixup virt flash node
 - Don't override users supplied ISA version
 - Fixup some CSR accesses
 - Use g_strjoinv() for virt machine PLIC string config
 - Fix an overflow in the SiFive CLINT
 - Add 64-bit register access helpers
 - Replace tcg_const_* with direct constant usage

# gpg: Signature made Wed 01 Sep 2021 03:08:48 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210901-2: (33 commits)
  target/riscv: Use {get,dest}_gpr for RVV
  target/riscv: Tidy trans_rvh.c.inc
  target/riscv: Use {get,dest}_gpr for RVD
  target/riscv: Use {get,dest}_gpr for RVF
  target/riscv: Use gen_shift_imm_fn for slli_uw
  target/riscv: Use {get,dest}_gpr for RVA
  target/riscv: Reorg csr instructions
  target/riscv: Fix hgeie, hgeip
  target/riscv: Fix rmw_sip, rmw_vsip, rmw_hsip vs write-only operation
  target/riscv: Use {get, dest}_gpr for integer load/store
  target/riscv: Use get_gpr in branches
  target/riscv: Use extracts for sraiw and srliw
  target/riscv: Use DisasExtend in shift operations
  target/riscv: Add DisasExtend to gen_unary
  target/riscv: Move gen_* helpers for RVB
  target/riscv: Move gen_* helpers for RVM
  target/riscv: Use gen_arith for mulh and mulhu
  target/riscv: Remove gen_arith_div*
  target/riscv: Add DisasExtend to gen_arith*
  target/riscv: Introduce DisasExtend and new helpers
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: Use {get,dest}_gpr for RVV

Remove gen_get_gpr, as the function becomes unused.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-25-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Tidy trans_rvh.c.inc

Exit early if check_access fails.
Split out do_hlv, do_hsv, do_hlvx subroutines.
Use dest_gpr, get_gpr in the new subroutines.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-24-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use {get,dest}_gpr for RVD

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-23-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use {get,dest}_gpr for RVF

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-22-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use gen_shift_imm_fn for slli_uw

Always use tcg_gen_deposit_z_tl; the special case for
shamt >= 32 is handled there.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-21-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use {get,dest}_gpr for RVA

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-20-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Reorg csr instructions

Introduce csrr and csrw helpers, for read-only and write-only insns.

Note that we do not properly implement this in riscv_csrrw, in that
we cannot distinguish true read-only (rs1 == 0) from any other zero
write_mask another source register -- this should still raise an
exception for read-only registers.

Only issue gen_io_start for CF_USE_ICOUNT.
Use ctx->zero for csrrc.
Use get_gpr and dest_gpr.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-19-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Fix hgeie, hgeip

We failed to write into *val for these read functions;
replace them with read_zero.  Only warn about unsupported
non-zero value when writing a non-zero value.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-18-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Fix rmw_sip, rmw_vsip, rmw_hsip vs write-only operation

We distinguish write-only by passing ret_value as NULL.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-17-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use {get, dest}_gpr for integer load/store

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-16-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use get_gpr in branches

Narrow the scope of t0 in trans_jalr.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-15-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use extracts for sraiw and srliw

These operations can be done in one instruction on some hosts.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-14-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use DisasExtend in shift operations

These operations are greatly simplified by ctx->w, which allows
us to fold gen_shiftw into gen_shift.  Split gen_shifti into
gen_shift_imm_{fn,tl} like we do for gen_arith_imm_{fn,tl}.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-13-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add DisasExtend to gen_unary

Use ctx->w for ctpopw, which is the only one that can
re-use the generic algorithm for the narrow operation.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-12-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Move gen_* helpers for RVB

Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvb.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-11-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Move gen_* helpers for RVM

Move these helpers near their use by the trans_*
functions within insn_trans/trans_rvm.c.inc.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-10-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use gen_arith for mulh and mulhu

Split out gen_mulh and gen_mulhu and use the common helper.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-9-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Remove gen_arith_div*

Use ctx->w and the enhanced gen_arith function.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-8-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add DisasExtend to gen_arith*

Most arithmetic does not require extending the inputs.
Exceptions include division, comparison and minmax.

Begin using ctx->w, which allows elimination of gen_addw,
gen_subw, gen_mulw.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-7-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Introduce DisasExtend and new helpers

Introduce get_gpr, dest_gpr, temp_new -- new helpers that do not force
tcg globals into temps, returning a constant 0 for $zero as source and
a new temp for $zero as destination.

Introduce ctx->w for simplifying word operations, such as addw.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-6-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add DisasContext to gen_get_gpr, gen_set_gpr

We will require the context to handle RV64 word operations.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Clean up division helpers

Utilize the condition in the movcond more; this allows some of
the setcond that were feeding into movcond to be removed.
Do not write into source1 and source2.  Re-name "condN" to "tempN"
and use the temporaries for more than holding conditions.

Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

tests/tcg/riscv64: Add test for division

Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-3-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Use tcg_constant_*

Replace uses of tcg_const_* with the allocate and free close together.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823195529.560295-2-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/registerfields: Use 64-bit bitfield for FIELD_DP64

If we have a field that's wider than 32-bits, we need a data type wide enough to
be able to create the bitfield used to deposit the value.

Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1626805903-162860-3-git-send-email-joe.komlodi@xilinx.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/core/register: Add more 64-bit utilities

We already have some utilities to handle 64-bit wide registers, so this just
adds some more for:
- Initializing 64-bit registers
- Extracting and depositing to an array of 64-bit registers

Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1626805903-162860-2-git-send-email-joe.komlodi@xilinx.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/intc/sifive_clint: Fix muldiv64 overflow in sifive_clint_write_timecmp()

`muldiv64` would overflow in cases where the final 96-bit value does not
fit in a `uint64_t`. This would result in small values that cause an
interrupt to be triggered much sooner than intended.

The overflow can be detected in most cases by checking if the new value is
smaller than the previous value. If the final result is larger than
`diff` it is either correct or it doesn't matter as it is effectively
infinite anyways.

`next` is an `uint64_t` value, but `timer_mod` takes an `int64_t`. This
resulted in high values such as `UINT64_MAX` being converted to `-1`,
which caused an immediate timer interrupt.

By limiting `next` to `INT64_MAX` no overflow will happen while the
timer will still be effectively set to "infinitely" far in the future.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/493
Signed-off-by: David Hoppenbrouwers <david@salt-inc.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210827152324.5201-1-david@salt-inc.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv/virt.c: Assemble plic_hart_config string with g_strjoinv()

In the riscv virt machine init function, We assemble a string
plic_hart_config which is a comma-separated list of N copies of the
VIRT_PLIC_HART_CONFIG string.  The code that does this has a
misunderstanding of the strncat() length argument.  If the source
string is too large strncat() will write a maximum of length+1 bytes
(length bytes from the source string plus a trailing NUL), but the
code here assumes that it will write only length bytes at most.

This isn't an actual bug because the code has correctly precalculated
the amount of memory it needs to allocate so that it will never be
too small (i.e.  we could have used plain old strcat()), but it does
mean that the code looks like it has a guard against accidental
overrun when it doesn't.

Rewrite the string handling here to use the glib g_strjoinv()
function, which means we don't need to do careful accountancy of
string lengths, and makes it clearer that what we're doing is
"create a comma-separated string".

Fixes: Coverity 1460752
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210812144647.10516-1-peter.maydell@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add User CSRs read-only check

For U-mode CSRs, read-only check is also needed.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210810014552.4884-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Don't wrongly override isa version

For some cpu, the isa version has already been set in cpu init function.
Thus only override the isa version when isa version is not set, or
users set different isa version explicitly by cpu parameters.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210811144612.68674-1-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Correct a comment in riscv_csrrw()

When privilege check fails, RISCV_EXCP_ILLEGAL_INST is returned,
not -1 (RISCV_EXCP_NONE).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210807141025.31808-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: virt: Move flash node to root

The flash is not inside the SoC, so it's inappropriate to put it
under the /soc node. Move it to root instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210807035641.22449-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/char: Add config for shakti uart

Use a dedicated UART config(CONFIG_SHAKTI_UART) to select
shakti uart.

Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210731190229.137483-1-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge remote-tracking branch 'remotes/marcandre/tags/clip-pull-request' into staging

# gpg: Signature made Tue 31 Aug 2021 14:29:27 BST
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/marcandre/tags/clip-pull-request:
  ui/vdagent: add a migration blocker
  ui/gtk-clipboard: emit release clipboard events
  ui/vdagent: send release when no clipboard owner
  ui/gtk-clipboard: use qemu_clipboard_info helper
  ui/vdagent: send empty clipboard when unhandled
  ui/vdagent: use qemu_clipboard_info helper
  ui/vdagent: use qemu_clipboard_peer_release helper
  ui/vdagent: split clipboard recv message handling
  ui/vdagent: reset outbuf on disconnect
  ui/vdagent: disconnect handlers and reset state on finalize
  ui/clipboard: release owned grabs on unregister
  ui/clipboard: add qemu_clipboard_peer_release() helper
  ui/clipboard: add qemu_clipboard_peer_owns() helper
  ui/clipboard: add helper to retrieve current clipboard
  ui/gtk-clipboard: fix clipboard enum typo
  ui/gtk-clipboard: use existing macros
  ui/vdagent: remove copy-pasta comment
  ui/vdagent: fix leak on error path

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ui/vdagent: add a migration blocker

The current implementation lacks migration support. After migration,
vdagent support will be broken (even after a restart of the daemons).
Let's try to fix it in 6.2.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-19-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/gtk-clipboard: emit release clipboard events

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-18-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: send release when no clipboard owner

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-17-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/gtk-clipboard: use qemu_clipboard_info helper

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-16-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: send empty clipboard when unhandled

Rather than leaving the agent timing out or hanging, reply to it with an
empty result.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-15-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: use qemu_clipboard_info helper

The clipboard unit now tracks the current clipboard grab, no need to
duplicate this work.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-14-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: use qemu_clipboard_peer_release helper

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-13-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: split clipboard recv message handling

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-12-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: reset outbuf on disconnect

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-11-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: disconnect handlers and reset state on finalize

Avoid handlers being called with dangling pointers when the object is
freed.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-10-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/clipboard: release owned grabs on unregister

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-9-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/clipboard: add qemu_clipboard_peer_release() helper

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-8-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/clipboard: add qemu_clipboard_peer_owns() helper

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-7-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/clipboard: add helper to retrieve current clipboard

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-6-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/gtk-clipboard: fix clipboard enum typo

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-5-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/gtk-clipboard: use existing macros

Hardcoding strings is error prone, use dedicated macros instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-4-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: remove copy-pasta comment

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-3-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

ui/vdagent: fix leak on error path

"info" was leaked when more than 10 entries.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-2-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.2-20210827' into staging

ppc patch queue 2021-08-27

First ppc pull request for qemu-6.2.  As usual, there's a fair bit
here, since it's been queued during the 6.1 freeze.  Highlights are:

 * Some fixes for 128 bit arithmetic and some vector opcodes that use
   them
 * Significant improvements to the powernv to support POWER10 cpus
   (more to come though)
 * Several cleanups to the ppc softmmu code
 * A few other assorted fixes

# gpg: Signature made Fri 27 Aug 2021 08:09:12 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.2-20210827:
  target/ppc: fix vector registers access in gdbstub for little-endian
  include/qemu/int128.h: introduce bswap128s
  target/ppc: fix vextu[bhw][lr]x helpers
  include/qemu/int128.h: define struct Int128 according to the host endianness
  ppc/xive: Export xive_presenter_notify()
  ppc/xive: Export PQ get/set routines
  ppc/pnv: add a chip topology index for POWER10
  ppc/pnv: Distribute RAM among the chips
  ppc/pnv: Use a simple incrementing index for the chip-id
  ppc/pnv: powerpc_excp: Do not discard HDECR exception when entering power-saving mode
  ppc/pnv: Change the POWER10 machine to support DD2 only
  ppc: Add a POWER10 DD2 CPU
  ppc/pnv: update skiboot to commit 820d43c0a775.
  target/ppc: moved store_40x_sler to helper_regs.c
  target/ppc: moved ppc_store_sdr1 to mmu_common.c
  target/ppc: divided mmu_helper.c in 2 files
  spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree
  xive: Remove extra '0x' prefix in trace events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2021-08-26' into staging

Error reporting patches for 2021-08-26

# gpg: Signature made Thu 26 Aug 2021 16:17:05 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2021-08-26:
  vl: Clean up -smp error handling
  Remove superfluous ERRP_GUARD()
  vhost: Clean up how VhostOpts method vhost_backend_init() fails
  vhost: Clean up how VhostOpts method vhost_get_config() fails
  microvm: Drop dead error handling in microvm_machine_state_init()
  migration: Handle migration_incoming_setup() errors consistently
  migration: Unify failure check for migrate_add_blocker()
  whpx nvmm: Drop useless migrate_del_blocker()
  vfio: Avoid error_propagate() after migrate_add_blocker()
  i386: Never free migration blocker objects instead of sometimes
  vhost-scsi: Plug memory leak on migrate_add_blocker() failure
  multi-process: Fix pci_proxy_dev_realize() error handling
  spapr: Explain purpose of ->fwnmi_migration_blocker more clearly
  spapr: Plug memory leak when we can't add a migration blocker
  error: Use error_fatal to simplify obvious fatal errors (again)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/ppc: fix vector registers access in gdbstub for little-endian

As vector registers are stored in host endianness, we shouldn't swap its
64-bit elements in user mode. Add a 16-byte case in
ppc_maybe_bswap_register to handle the reordering of elements in softmmu
and remove avr_need_swap which is now unused.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210826145656.2507213-3-matheus.ferst@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

include/qemu/int128.h: introduce bswap128s

Changes the current bswap128 implementation to use __builtin_bswap128
when available, adds a bswap128 implementation for !CONFIG_INT128
builds, and introduces bswap128s based on bswap128.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210826145656.2507213-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: fix vextu[bhw][lr]x helpers

These helpers shouldn't depend on the host endianness, as they only use
shifts, ands, and int128_* methods.

Fixes: 60caf2216bf0 ("target-ppc: add vextu[bhw][lr]x instructions")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210826141446.2488609-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

include/qemu/int128.h: define struct Int128 according to the host endianness

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210826141446.2488609-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/xive: Export xive_presenter_notify()

It's generic enough to be used from the XIVE2 router and avoid more
duplication.

Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-9-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/xive: Export PQ get/set routines

These will be shared with the XIVE2 router.

Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-8-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: add a chip topology index for POWER10

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: Distribute RAM among the chips

But always give the first 1GB to chip 0 as skiboot requires it.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-6-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: Use a simple incrementing index for the chip-id

When the QEMU PowerNV machine was introduced, multi chip support
modeled a two socket system with dual chip modules as found on some P8
Tuleta systems (8286-42A). But this is hardly used and not relevant
for QEMU. Use a simple index instead.

With this change, we can now increase the max socket number to 16 as
found on high end systems.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-5-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: powerpc_excp: Do not discard HDECR exception when entering power-saving mode

The Hypervisor Decrementer exception should not be generated while the
CPU is in power-saving mode (see cpu_ppc_hdecr_excp()). However,
discarding the exception before entering the power-saving mode is
wrong since we would loose a previously generated HDEC.

Fixes: 4b236b621bf0 ("ppc: Initial HDEC support")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: Change the POWER10 machine to support DD2 only

There is no need to keep the DD1 chip model as it will never be
publicly available.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc: Add a POWER10 DD2 CPU

The POWER10 DD2 CPU adds an extra LPCR[HAIL] bit. DD1 doesn't have
HAIL but since it does not break the modeling and that we don't plan
to support DD1, modify the LPCR mask of all the POWER10 family.

Setting the HAIL bit is a requirement to support the scv instruction
on PowerNV POWER10 platforms since glibc-2.33.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809134547.689560-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

ppc/pnv: update skiboot to commit 820d43c0a775.

It includes support for the POWER10 processor and the QEMU platform.

Built from submodule.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210806180040.156999-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: moved store_40x_sler to helper_regs.c

moved store_40x_sler from mmu_common.c to helper_regs.c as it is
a function to store a value in a special purpose register, so
moving it to a file focused in special register manipulation
is more appropriate.

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210723175627.72847-4-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: moved ppc_store_sdr1 to mmu_common.c

ppc_store_sdr1 was at first in mmu_helper.c and was moved as part
the patches to enable the disable-tcg option, now it's being moved
back to a file that will be compiled with that option

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210723175627.72847-3-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: divided mmu_helper.c in 2 files

Divided mmu_helper.c in 2 files, functions inside #ifdef CONFIG_SOFTMMU
stayed in mmu_helper.c, other functions moved to mmu_common.c. Updated
meson.build to compile mmu_common.c and only compile mmu_helper.c when
CONFIG_TCG is set.
Moved function declarations, #define and structs used by both files to
internal.h except for functions that use structures defined in cpu.h,
those were moved to cpu.h.

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210723175627.72847-2-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

spapr_pci: Fix leak in spapr_phb_vfio_get_loc_code() with g_autofree

This uses g_autofree to simplify logic in spapr_phb_vfio_get_loc_code(),
in the process fixing a leak in one of the paths.  I'm told this fixes
Coverity error CID 1460454

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 16b0ea1d852 ("spapr_pci: populate ibm,loc-code")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

xive: Remove extra '0x' prefix in trace events

Cc: thuth@redhat.com
Fixes: 4e960974d4ee ("xive: Add trace events")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/519
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210809085227.288523-1-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210826' into staging

target-arm queue:
 * hw/dma/xlnx-zdma, xlnx_csu_dma: Require 'dma' link property to be set
 * hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitly
 * target/arm/cpu: Introduce sve_vq_supported bitmap
 * docs/specs: Convert ACPI spec docs to rST
 * arch_init: Clean up and refactoring
 * hw/core/loader: In gunzip(), check index is in range before use, not after
 * softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
 * softmmu/physmem.c: Check return value from realpath()
 * Zero-initialize sockaddr_in structs
 * raspi: Use error_fatal for SoC realize errors, not error_abort
 * target/arm: Avoid assertion trying to use KVM and multiple ASes
 * target/arm: Implement HSTR.TTEE
 * target/arm: Implement HSTR.TJDBX
 * target/arm: Do hflags rebuild in cpsr_write()
 * hw/arm/xlnx-versal, xlnx-zynqmp: Add unimplemented APU mmio

# gpg: Signature made Thu 26 Aug 2021 18:02:10 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210826: (37 commits)
  hw/arm/xlnx-zynqmp: Add unimplemented APU mmio
  hw/arm/xlnx-versal: Add unimplemented APU mmio
  target/arm: Do hflags rebuild in cpsr_write()
  target/arm: Implement HSTR.TJDBX
  target/arm: Implement HSTR.TTEE
  hw/arm/virt: Delete EL3 error checksnow provided in CPU realize
  target/arm: Avoid assertion trying to use KVM and multiple ASes
  raspi: Use error_fatal for SoC realize errors, not error_abort
  tests/tcg/multiarch/linux-test: Zero-initialize sockaddr structs
  tests/qtest/ipmi-bt-test: Zero-initialize sockaddr struct
  gdbstub: Zero-initialize sockaddr structs
  net: Zero sockaddr_in in parse_host_port()
  softmmu/physmem.c: Check return value from realpath()
  softmmu/physmem.c: Remove unneeded NULL check in qemu_ram_alloc_from_fd()
  hw/core/loader: In gunzip(), check index is in range before use, not after
  stubs: Remove unused arch_type.c stub
  arch_init.h: Don't include arch_init.h unnecessarily
  arch_init.h: Move QEMU_ARCH_VIRTIO_* to qdev-monitor.c
  arch_init.h: Add QEMU_ARCH_HEXAGON
  meson.build: Define QEMU_ARCH in config-target.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

Add unimplemented APU mmio region to xlnx-zynqmp for booting
bare-metal guests built with standalone bsp, which access the
region from one of the following places:
  https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139
  https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210823173818.201259-3-tong.ho@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: Add unimplemented APU mmio

Add unimplemented APU mmio region to xlnx-versal for booting
bare-metal guests built with standalone bsp, which access the
region from one of the following places:
  https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139
  https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Message-id: 20210823173818.201259-2-tong.ho@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Do hflags rebuild in cpsr_write()

Currently we rely on all the callsites of cpsr_write() to rebuild the
cached hflags if they change one of the CPSR bits which we use as a
TB flag and cache in hflags.  This is a bit awkward when we want to
change the set of CPSR bits that we cache, because it means we need
to re-audit all the cpsr_write() callsites to see which flags they
are writing and whether they now need to rebuild the hflags.

Switch instead to making cpsr_write() call arm_rebuild_hflags()
itself if one of the bits being changed is a cached bit.

We don't do the rebuild for the CPSRWriteRaw write type, because that
kind of write is generally doing something special anyway.  For the
CPSRWriteRaw callsites in the KVM code and inbound migration we
definitely don't want to recalculate the hflags; the callsites in
boot.c and arm-powerctl.c have to do a rebuild-hflags call themselves
anyway because of other CPU state changes they make.

This allows us to drop explicit arm_rebuild_hflags() calls in a
couple of places where the only reason we needed to call it was the
CPSR write.

This fixes a bug where we were incorrectly failing to rebuild hflags
in the code path for a gdbstub write to CPSR, which meant that you
could make QEMU assert by breaking into a running guest, altering the
CPSR to change the value of, for example, CPSR.E, and then
continuing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210817201843.3829-1-peter.maydell@linaro.org

target/arm: Implement HSTR.TJDBX

In v7A, the HSTR register has a TJDBX bit which traps NS EL0/EL1
access to the JOSCR and JMCR trivial Jazelle registers, and also BXJ.
Implement these traps. In v8A this HSTR bit doesn't exist, so don't
trap for v8A CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210816180305.20137-3-peter.maydell@linaro.org