Jack Wang [Fri, 26 Aug 2022 10:14:35 +0000 (12:14 +0200)]
scsi: qlogicpti: Fix dma_map_sg() check
Add missing error check for dma_map_sg().
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20220826101435.79170-1-jinpu.wang@ionos.com Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie [Fri, 12 Aug 2022 01:00:25 +0000 (20:00 -0500)]
scsi: core: Add error codes for internal SCSI midlayer use
If a driver returns:
- DID_TARGET_FAILURE
- DID_NEXUS_FAILURE
- DID_ALLOC_FAILURE
- DID_MEDIUM_ERROR
we hit a couple bugs:
1. The SCSI error handler runs because scsi_decide_disposition() has no
case statements for them and we return FAILED.
2. For SG IO the userspace app gets a success status instead of failed,
because scsi_result_to_blk_status() clears those errors.
This patch adds a new internal error code byte for use by the SCSI
midlayer. This will be used instead of the above error codes, so we don't
have to play that clearing the host code game in
scsi_result_to_blk_status() and drivers cannot accidentally use them.
A subsequent commit will then remove the internal users of the above codes
and convert us to use the new ones.
Mike Christie [Fri, 12 Aug 2022 01:00:23 +0000 (20:00 -0500)]
scsi: qla2xxx: Drop DID_TARGET_FAILURE use
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it
results in entering SCSI error handling.
This has qla2xxx use DID_NO_CONNECT because it looks like we hit this error
when we can't find a port. It will give us the same hard error behavior and
it seems to match the error where we can't find the endpoint.
Mike Christie [Fri, 12 Aug 2022 01:00:22 +0000 (20:00 -0500)]
scsi: virtio_scsi: Drop DID_NEXUS_FAILURE use
DID_NEXUS_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_NEXUS_FAILURE. It looks like qemu returns that error code if
host OS returns DID_NEXUS_FAILURE (qemu's internal
SCSI_HOST_RESERVATION_ERROR maps to DID_NEXUS_FAILURE). This shouldn't
happen for Linux since we don't propagate that error code to userspace.
This has us convert VIRTIO_SCSI_S_NEXUS_FAILURE to a
SAM_STAT_RESERVATION_CONFLICT in case some other virt layer is returning
it. In that case we will still get the reservation confict failure we
expect.
Mike Christie [Fri, 12 Aug 2022 01:00:21 +0000 (20:00 -0500)]
scsi: virtio_scsi: Drop DID_TARGET_FAILURE use
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_TARGET_FAILURE. It looks like qemu returns that error code
if a host OS returns it, but this shouldn't happen for Linux since we never
propagate that error to userspace.
This has us use DID_BAD_TARGET in case some other virt layer is returning
it. In that case we will still get a hard error like before and it conveys
something unexpected happened.
Mike Christie [Fri, 12 Aug 2022 01:00:20 +0000 (20:00 -0500)]
scsi: uas: Drop DID_TARGET_FAILURE use
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
It looks like the driver wanted a hard failure so this swaps it with
DID_BAD_TARGET which gives us that behavior. The error looks like it's for
a case where the target did not support a TMF we wanted to use (maybe not a
bad target but disappointing so close enough).
Mike Christie [Fri, 12 Aug 2022 01:00:18 +0000 (20:00 -0500)]
scsi: xen: Drop use of internal host codes
The error codes:
- DID_TARGET_FAILURE
- DID_NEXUS_FAILURE
- DID_ALLOC_FAILURE
- DID_MEDIUM_ERROR
are internal to the SCSI layer. Drivers must not use them because:
1. They are not propagated upwards, so SG IO/passthrough users will not
see an error and think a command was successful.
xen-scsiback will never see this error and should not try to send it.
2. There is no handling for them in scsi_decide_disposition() so if
xen-scsifront were to return the error to the SCSI midlayer then it
kicks off the error handler which is definitely not what we want.
Nilesh Javali [Fri, 26 Aug 2022 10:25:58 +0000 (03:25 -0700)]
scsi: qla2xxx: Define static symbols
drivers/scsi/qla2xxx/qla_os.c:40:20: warning: symbol 'qla_trc_array'
was not declared. Should it be static?
drivers/scsi/qla2xxx/qla_os.c:345:5: warning: symbol
'ql2xdelay_before_pci_error_handling' was not declared.
Should it be static?
Define qla_trc_array and ql2xdelay_before_pci_error_handling as static to
fix sparse warnings.
Link: https://lore.kernel.org/r/20220826102559.17474-7-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arun Easi [Fri, 26 Aug 2022 10:25:54 +0000 (03:25 -0700)]
scsi: qla2xxx: Fix response queue handler reading stale packets
On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.
Mauricio Faria de Oliveira [Thu, 25 Aug 2022 12:01:59 +0000 (09:01 -0300)]
scsi: qla2xxx: Log message "skipping scsi_scan_host()" as informational
This message is helpful to troubleshoot missing LUNs/SAN boot errors. It'd
be nice to log it by default instead of only being enabled with debug.
This user had an accidental/forgotten file modprobe.d/qla2xxx.conf w/
option qlini_mode=disabled from experiments with FC target mode, and their
boot LUN didn't come up, as it skips SCSI scan, of course.
However, their boot log didn't provide any clues to help understand that.
The issue/message could be figured out w/ ql2xextended_error_logging, but
it would have been simpler (or even deflected/addressed by user) if it had
been there by default. And it also would help support/triage/deflection
tooling.
Expected change:
scsi host15: qla2xxx
+qla2xxx [0000:3b:00.0]-00fb:15: skipping scsi_scan_host() for non-initiator port
qla2xxx [0000:3b:00.0]-00fb:15: QLogic QLE2692 - QLE2692 Dual Port 16Gb FC to PCIe Gen3 x8 Adapter.
Sreekanth Reddy [Thu, 25 Aug 2022 07:54:56 +0000 (13:24 +0530)]
scsi: mpt3sas: Increase cmd_per_lun to 128
With cmd_per_lun value 7, a higher number of cache lines (map_nr) are
needed while allocating sdev->budget_map which is not reasonable and hence
increase the cmd_per_lun value to 128.
The ExtendedType field was set to 1 in the diag buffer register command and
hence MPT Endpoint firmware is failing the request with Invalid Field
IOCStatus.
memset the request frame to zero before framing the diag buffer register
command.
Sreekanth Reddy [Thu, 25 Aug 2022 07:54:54 +0000 (13:24 +0530)]
scsi: mpt3sas: Don't change DMA mask while reallocating pools
When a pool crosses the 4GB boundary region then before reallocating pools
change the coherent DMA mask to 32 bits and keep the normal DMA mask set to
63/64 bits.
Sreekanth Reddy [Tue, 16 Aug 2022 08:08:01 +0000 (13:38 +0530)]
scsi: mpt3sas: Prevent error handler escalation when device removed
If SCSI error handling is taking place for timed out I/Os on a drive and
the corresponding drive is removed, then stop escalating to higher level of
reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key.
Gustavo A. R. Silva [Mon, 15 Aug 2022 21:49:38 +0000 (16:49 -0500)]
scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_PD_CFG_SEQ_NUM_SYNC
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_PD_CFG_SEQ_NUM_SYNC and refactor the rest of the code
accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help us make progress towards globally enabling
-fstrict-flex-arrays [0].
Gustavo A. R. Silva [Mon, 15 Aug 2022 21:46:13 +0000 (16:46 -0500)]
scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_DRV_RAID_MAP
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the code accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().
Gustavo A. R. Silva [Mon, 15 Aug 2022 21:42:21 +0000 (16:42 -0500)]
scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP_DYNAMIC
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_FW_RAID_MAP_DYNAMIC.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().
Gustavo A. R. Silva [Mon, 15 Aug 2022 21:40:35 +0000 (16:40 -0500)]
scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the the rest of the code
accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().
Tetsuo Handa [Sun, 21 Aug 2022 03:59:44 +0000 (12:59 +0900)]
scsi: qla2xxx: Avoid flush_scheduled_work() usage
Although qla2xxx driver is calling schedule_{,delayed}_work() from 10
locations, I assume that flush_scheduled_work() from qlt_stop_phase1()
needs to flush only works scheduled by qlt_sched_sess_work(), for this loop
continues while "struct qla_tgt"->sess_works_list is not empty.
Link: https://lore.kernel.org/r/133c6723-90b6-5c8b-72b4-cc01eeb3a8c0@I-love.SAKURA.ne.jp Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tetsuo Handa [Sun, 21 Aug 2022 03:59:00 +0000 (12:59 +0900)]
scsi: qla2xxx: Always wait for qlt_sess_work_fn() from qlt_stop_phase1()
Currently qlt_stop_phase1() may fail to call flush_scheduled_work(), for
list_empty() may return true as soon as qlt_sess_work_fn() called
list_del(). In order to close this race window, check list_empty() after
calling flush_scheduled_work().
If this patch causes problems, please check commit c4f135d64382
("workqueue: Wrap flush_workqueue() using a macro"). We are on the way to
remove all flush_scheduled_work() calls from the kernel.
Link: https://lore.kernel.org/r/7f24469d-9e39-3398-d851-329b54c0b923@I-love.SAKURA.ne.jp Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:36 +0000 (18:17 -0700)]
scsi: lpfc: Copyright updates for 14.2.0.6 patches
Update copyrights to 2022 for files modified in the 14.2.0.6 patch set.
Link: https://lore.kernel.org/r/20220819011736.14141-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:35 +0000 (18:17 -0700)]
scsi: lpfc: Update lpfc version to 14.2.0.6
Update lpfc version to 14.2.0.6.
Link: https://lore.kernel.org/r/20220819011736.14141-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:34 +0000 (18:17 -0700)]
scsi: lpfc: Remove SANDiags related code
The SANDiags feature is unused, and related code is removed.
Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:33 +0000 (18:17 -0700)]
scsi: lpfc: Add warning notification period to CMF_SYNC_WQE
Add capability to specify warning notification period to help firmware
adjust to congestion accordingly.
Link: https://lore.kernel.org/r/20220819011736.14141-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:32 +0000 (18:17 -0700)]
scsi: lpfc: Rework MIB Rx Monitor debug info logic
The kernel test robot reported the following sparse warning:
arch/arm64/include/asm/cmpxchg.h:88:1: sparse: sparse: cast truncates
bits from constant value (369 becomes 69)
On arm64, atomic_xchg only works on 8-bit byte fields. Thus, the macro
usage of LPFC_RXMONITOR_TABLE_IN_USE can be unintentionally truncated
leading to all logic involving the LPFC_RXMONITOR_TABLE_IN_USE macro to not
work properly.
Replace the Rx Table atomic_t indexing logic with a new
lpfc_rx_info_monitor structure that holds a circular ring buffer. For
locking semantics, a spinlock_t is used.
Link: https://lore.kernel.org/r/20220819011736.14141-4-jsmart2021@gmail.com Fixes: 17b27ac59224 ("scsi: lpfc: Add rx monitoring statistics") Cc: <stable@vger.kernel.org> # v5.15+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:31 +0000 (18:17 -0700)]
scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID
An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to
lpfc_nlp_put() with a null pointer to a nodelist structure.
Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon
entry.
Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 19 Aug 2022 01:17:30 +0000 (18:17 -0700)]
scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery
During a stress offline/online test in PT2PT topology, target rediscovery
can fail with a specific target vendor array.
When the HBA transitions to online mode it is possible to receive an
unsolicited FLOGI before processing the Link Up event. The received FLOGI
will set the defer_flogi_acc_flag, which instructs the driver to wait until
it transmits its own FLOGI before ACKing the received FLOGI. In this
failure scenario, the link up processing clears the set
defer_flogi_acc_flag before we have sent out the FLOGI. As the target has
the higher WWPN and is responsible for sending the PLOGI, the target is
stuck waiting for its FLOGI_ACC that the driver will never send.
Remove the clear of defer_flogi_acc_flag from Link Up event processing. In
this stress test case, the defer_flogi_acc_flag is cleared during the Link
Down event processing anyways.
Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Fri, 5 Aug 2022 11:56:52 +0000 (12:56 +0100)]
scsi: st: Remove redundant variable pointer stp
Variable stp is assigned a value that is never read, the assignment and the
variable stp are redundant and can be removed.
Cleans up clang scan build warning:
drivers/scsi/st.c:4253:7: warning: Although the value stored to 'stp'
is used in the enclosing expression, the value is never actually
read from 'stp' [deadcode.DeadStores]
Colin Ian King [Fri, 5 Aug 2022 11:50:42 +0000 (12:50 +0100)]
scsi: megaraid: Remove redundant assignment to variable mfiStatus
The variable mfiStatus is assigned a value but it is never read. The
assignment is redundant and can be removed. Also remove { } as the return
statement does not need to be in its own code block.
Cleans up clang scan build warning:
drivers/scsi/megaraid/megaraid_sas_base.c:4026:7: warning: Although the
value stored to 'mfiStatus' is used in the enclosing expression, the
value is never actually read from 'mfiStatus' [deadcode.DeadStores]
Colin Ian King [Fri, 5 Aug 2022 11:41:00 +0000 (12:41 +0100)]
scsi: initio: Remove redundant assignment to pointer scb
The variable scb is assigned a value but it is never read. The assignment
is redundant and can be removed. Also replace the != NULL check with the
more usual non-null check idiom.
Cleans up clang scan build warning:
drivers/scsi/initio.c:1169:9: warning: Although the value stored to 'scb'
is used in the enclosing expression, the value is never actually read
from 'scb' [deadcode.DeadStores]
Variable iocnum is assigned a value that is never read, the assignment and
hence the variable are redundant can be removed. Also update the comment to
reflect the correct name of the variable being updated.
Cleans up clang-scan warning:
drivers/message/fusion/mptctl.c:641:8: warning: Although the value stored
to 'iocnum' is used in the enclosing expression, the value is never
actually read from 'iocnum' [deadcode.DeadStores]
Bradley Grove [Fri, 5 Aug 2022 17:46:09 +0000 (13:46 -0400)]
scsi: mpt3sas: Disable MPI2_FUNCTION_FW_DOWNLOAD for ATTO devices
Disable firmware download for ATTO devices where it is not supported.
Link: https://lore.kernel.org/r/20220805174609.14830-2-bgrove@attotech.com Co-developed-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bradley Grove [Fri, 5 Aug 2022 17:46:08 +0000 (13:46 -0400)]
scsi: mpt3sas: Add support for ATTO ExpressSAS H12xx GT devices
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM
structure used by ATTO's devices.
Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.com Co-developed-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Thu, 4 Aug 2022 13:12:25 +0000 (18:42 +0530)]
scsi: mpi3mr: Refresh SAS ports during soft reset
Update the host's SAS ports if there is change in port id or phys. If the
port id is changed, then the driver updates it. If some phys are
enabled/disabled during reset, then driver updates them in STL.
Check for the responding expander devices and update the device handle if
it got changed. Register the expander with STL if it got added during reset
and unregister the expander device if it got removed during reset.
Sreekanth Reddy [Thu, 4 Aug 2022 13:12:23 +0000 (18:42 +0530)]
scsi: mpi3mr: Add framework to issue MPT transport cmds
Add framework to issue MPT transport commands to controllers. Also issue
the MPT transport commands to get the manufacturing info of SAS expander
device.
The sysfs attribute that controls the WB was implemented. (1)
In the case of "Hibern Flush", it is always good to turn on. Control may
not be required. (2)
Finally, "Flush" may be necessary because the Auto-Hibern8 is not supported
in a specific environment. So the sysfs attribute that controls this is
necessary. (3)
Peter Wang [Thu, 4 Aug 2022 02:54:22 +0000 (10:54 +0800)]
scsi: ufs: core: Allow host driver to disable wb toggling during clock scaling
Mediatek UFS does not want to toggle write booster during clock scaling.
Permit host driver to disable wb toggling during clock scaling.
Introduce a flag UFSHCD_CAP_WB_WITH_CLK_SCALING to decouple WB and clock
scaling. UFSHCD_CAP_WB_WITH_CLK_SCALING is only valid when
UFSHCD_CAP_CLK_SCALING is set. Just like UFSHCD_CAP_HIBERN8_WITH_CLK_GATING
is valid only when UFSHCD_CAP_CLK_GATING set.
Set UFSHCD_CAP_WB_WITH_CLK_SCALING for qcom to compatible legacy design at
the same time.
Daniil Lunev [Wed, 3 Aug 2022 20:50:34 +0000 (06:50 +1000)]
scsi: ufs: core: Use local_clock() for debugging timestamps
CLOCK_MONOTONIC is not advanced when the system is in suspend. This becomes
problematic when debugging issues related to suspend-resume: the timestamps
printed by ufshcd_print_trs can not be correlated with dmesg entries, which
are timestamped with local_clock().
Change the used clock to local_clock() for the informational timestamp
variables and adds mirroring *_local_clock instances for variables used in
subsequent derevations (to not change the semantics of those derevations).
Po-Wen Kao [Tue, 2 Aug 2022 23:54:37 +0000 (07:54 +0800)]
scsi: ufs: ufs-mediatek: Support clk-scaling to optimize power consumption
Provide clk-scaling feature in MediaTek UFS platforms.
MediaTek platform supports clk-scaling by switching parent clock mux of
UFSHCI main clocks: ufs_sel.
The driver needs to prevent changing the rate of ufs_sel because its parent
PLL clock may be shared between multiple IPs. In order to achieve this
goal, the maximum and minimum clock rates of ufs_sel defined in dts should
match the rate of "ufs_sel_max_src" and "ufs_sel_min_src" respectively.
Link: https://lore.kernel.org/r/20220802235437.4547-6-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang [Tue, 2 Aug 2022 23:54:36 +0000 (07:54 +0800)]
scsi: ufs: ufs-mediatek: Fix performance scaling
If clk-scaling is enabled, performance scaling can be bound to the decision
of clk-scaling to avoid unnecessary boosting.
In addition, fix missing initialization of pm-qos request.
Link: https://lore.kernel.org/r/20220802235437.4547-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang [Tue, 2 Aug 2022 23:54:35 +0000 (07:54 +0800)]
scsi: ufs: ufs-mediatek: Dump more registers
Dump more proprietary UFSHCI status registers for easier issue breakdown.
Link: https://lore.kernel.org/r/20220802235437.4547-4-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Linus Torvalds [Sun, 14 Aug 2022 16:22:11 +0000 (09:22 -0700)]
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Linus Torvalds [Sun, 14 Aug 2022 15:48:13 +0000 (08:48 -0700)]
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Linus Torvalds [Sun, 14 Aug 2022 00:31:18 +0000 (17:31 -0700)]
Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
David Howells [Wed, 10 Aug 2022 17:52:47 +0000 (18:52 +0100)]
afs: Enable multipage folio support
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Aug 2022 21:38:22 +0000 (14:38 -0700)]
Merge tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Linus Torvalds [Sat, 13 Aug 2022 21:24:12 +0000 (14:24 -0700)]
Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Linus Torvalds [Sat, 13 Aug 2022 21:00:45 +0000 (14:00 -0700)]
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Linus Torvalds [Sat, 13 Aug 2022 20:50:11 +0000 (13:50 -0700)]
Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
Linus Torvalds [Sat, 13 Aug 2022 20:41:48 +0000 (13:41 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Linus Torvalds [Sat, 13 Aug 2022 20:37:36 +0000 (13:37 -0700)]
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Linus Torvalds [Sat, 13 Aug 2022 20:28:54 +0000 (13:28 -0700)]
Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
Carsten Haitzler [Fri, 12 Aug 2022 12:16:28 +0000 (13:16 +0100)]
perf test: Refactor shell tests allowing subdirs
This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.
To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.
This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).
It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).
This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / users / dwmw2 / linux.git / log