Klaus Jensen [Wed, 9 Nov 2022 10:40:11 +0000 (11:40 +0100)]
hw/nvme: clean up confusing use of errp/local_err
Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.
Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Klaus Jensen [Thu, 8 Dec 2022 08:12:45 +0000 (09:12 +0100)]
hw/nvme: fix missing cq eventidx update
Prior to reading the shadow doorbell cq head, we have to update the
eventidx. Otherwise, we risk that the driver will skip an mmio doorbell
write. This happens on riscv64, as reported by Guenter.
Adding the missing update to the cq eventidx fixes the issue.
Klaus Jensen [Thu, 8 Dec 2022 11:49:04 +0000 (12:49 +0100)]
hw/nvme: rename shadow doorbell related trace events
Rename the trace events related to writing the event index and reading
the doorbell value to make it more clear that the event is associated
with an actual update (write or read respectively).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Peter Maydell [Sun, 8 Jan 2023 11:23:17 +0000 (11:23 +0000)]
Merge tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu into staging
tcg/s390x improvements:
- drop support for pre-z196 cpus (eol before 2017)
- add support for misc-instruction-extensions-3
- misc cleanups
# gpg: Signature made Sat 07 Jan 2023 07:47:59 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu: (27 commits)
tcg/s390x: Avoid the constant pool in tcg_out_movi
tcg/s390x: Cleanup tcg_out_movi
tcg/s390x: Tighten constraints for 64-bit compare
tcg/s390x: Implement ctpop operation
tcg/s390x: Use tgen_movcond_int in tgen_clz
tcg/s390x: Support SELGR instruction in movcond
tcg/s390x: Generalize movcond implementation
tcg/s390x: Create tgen_cmp2 to simplify movcond
tcg/s390x: Support MIE3 logical operations
tcg/s390x: Tighten constraints for and_i64
tcg/s390x: Tighten constraints for or_i64 and xor_i64
tcg/s390x: Issue XILF directly for xor_i32
tcg/s390x: Support MIE2 MGRK instruction
tcg/s390x: Support MIE2 multiply single instructions
tcg/s390x: Distinguish RIE formats
tcg/s390x: Distinguish RRF-a and RRF-c formats
tcg/s390x: Use LARL+AGHI for odd addresses
tcg/s390x: Remove DISTINCT_OPERANDS facility check
tcg/s390x: Remove FAST_BCR_SER facility check
tcg/s390x: Check for load-on-condition facility at startup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Fri 06 Jan 2023 06:21:22 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230106' of https://gitlab.com/gaosong/qemu:
hw/intc/loongarch_pch: Change default irq number of pch irq controller
hw/intc/loongarch_pch_pic: add irq number property
hw/intc/loongarch_pch_msi: add irq number property
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 8 Dec 2022 21:48:00 +0000 (21:48 +0000)]
tcg/s390x: Tighten constraints for 64-bit compare
Give 64-bit comparison second operand a signed 33-bit immediate.
This is the smallest superset of uint32_t and int32_t, as used
by CLGFI and CGFI respectively. The rest of the 33-bit space
can be loaded into TCG_TMP0. Drop use of the constant pool.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 2 Dec 2022 04:05:38 +0000 (04:05 +0000)]
tcg/s390x: Support SELGR instruction in movcond
The new select instruction provides two separate register inputs,
whereas the old load-on-condition instruction overlaps one of the
register inputs with the destination.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 24 Feb 2022 00:24:05 +0000 (00:24 +0000)]
tcg/s390x: Generalize movcond implementation
Generalize movcond to support pre-computed conditions, and the same
set of arguments at all times. This will be assumed by a following
patch, which needs to reuse tgen_movcond_int.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 8 Dec 2022 17:28:19 +0000 (17:28 +0000)]
tcg/s390x: Tighten constraints for or_i64 and xor_i64
Drop support for sequential OR and XOR, as the serial dependency is
slower than loading the constant first. Let the register allocator
handle such immediates by matching only what one insn can achieve.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The distinct-operands facility is bundled into facility 45,
along with load-on-condition. We are checking this at startup.
Remove the a0 == a1 checks for 64-bit sub, and, or, xor, as there
is no space savings for avoiding the distinct-operands insn.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 7 Dec 2022 17:38:42 +0000 (17:38 +0000)]
tcg/s390x: Check for load-on-condition facility at startup
The general-instruction-extension facility was introduced in z196,
which itself was end-of-life in 2021. In addition, z196 is the
minimum CPU supported by our set of supported operating systems:
RHEL 7 (z196), SLES 12 (z196) and Ubuntu 16.04 (zEC12).
Check for facility number 45, which will be the consilidated check
for several facilities.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Wed, 30 Nov 2022 00:17:50 +0000 (00:17 +0000)]
tcg/s390x: Remove TCG_REG_TB
This reverts 829e1376d940 ("tcg/s390: Introduce TCG_REG_TB"), and
several follow-up patches. The primary motivation is to reduce the
less-tested code paths, pre-z10. Secondarily, this allows the
unconditional use of TCG_TARGET_HAS_direct_jump, which might be more
important for performance than any slight increase in code size.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v4: Do not simplify tgen_ori, tgen_xori.
Peter Maydell [Fri, 6 Jan 2023 22:15:53 +0000 (22:15 +0000)]
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 6 Jan 2023 15:40:37 +0000 (15:40 +0000)]
Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging
Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
tests/tcg/multiarch: add vma-pthread.c
accel/tcg: Handle false negative lookup in page_check_range
accel/tcg: Use g_free_rcu for user-exec interval trees
accel/tcg: Fix tb_invalidate_phys_page_unwind
tcg: Add TCGHelperInfo argument to tcg_out_call
tcg/aarch64: Merge tcg_out_callr into tcg_out_call
tcg: Move ffi_cif pointer into TCGHelperInfo
tcg: Factor init_ffi_layouts() out of tcg_context_init()
tcg: Convert typecode_to_ffi from array to function
tcg: Reorg function calls
tcg: Use output_pref wrapper function
tcg: Vary the allocation size for TCGOp
tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
accel/tcg/plugin: Avoid duplicate copy in copy_call
accel/tcg/plugin: Don't search for the function pointer index
tcg: Use TCG_CALL_ARG_EVEN for TCI special case
tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 6 Jan 2023 12:11:22 +0000 (12:11 +0000)]
Merge tag 'pull-hex-20230105' of https://github.com/quic/qemu into staging
Hexagon update: patches from several folks
# gpg: Signature made Thu 05 Jan 2023 17:35:27 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230105' of https://github.com/quic/qemu:
Update scripts/meson-buildoptions.sh
Hexagon (target/hexagon) implement mutability mask for GPRs
target/hexagon: suppress unused variable warning
target/hexagon/idef-parser: fix two typos in README
tests/tcg/hexagon: fix underspecifed asm constraints
target/hexagon: rename aliased register HEX_REG_P3_0
linux-user/hexagon: fix signal context save & restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tianrui Zhao [Tue, 27 Dec 2022 03:19:57 +0000 (11:19 +0800)]
hw/intc/loongarch_pch: Change default irq number of pch irq controller
Change the default irq number of pch pic to 32, so that the irq
number of pch msi is 224(256 - 32), and move the 'PCH_PIC_IRQ_NUM'
macro to pci-host/ls7a.h and add prefix 'VIRT' on it to keep standard
format.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230104020518.2564263-4-zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
Tianrui Zhao [Wed, 14 Dec 2022 01:57:18 +0000 (09:57 +0800)]
hw/intc/loongarch_pch_pic: add irq number property
With loongarch 7A1000 manual, irq number supported can be set
in PCH_PIC_INT_ID_HI register. This patch adds irq number property
for loongarch_pch_pic, so that virt machine can set different
irq number when pch_pic intc is added.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230104020518.2564263-3-zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
Bin Meng [Sun, 11 Dec 2022 03:08:29 +0000 (11:08 +0800)]
hw/intc: sifive_plic: Fix the pending register range check
The pending register upper limit is currently set to
plic->num_sources >> 3, which is wrong, e.g.: considering
plic->num_sources is 7, the upper limit becomes 0 which fails
the range check if reading the pending register at pending_base.
Fixes: 1e24429e40df ("SiFive RISC-V PLIC Block") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-16-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:27 +0000 (11:08 +0800)]
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
At present the SiFive PLIC model "priority-base" expects interrupt
priority register base starting from source 1 instead source 0,
that's why on most platforms "priority-base" is set to 0x04 except
'opentitan' machine. 'opentitan' should have set "priority-base"
to 0x04 too.
Note the irq number calculation in sifive_plic_{read,write} is
correct as the codes make up for the irq number by adding 1.
Let's simply update "priority-base" to start from interrupt source
0 and add a comment to make it crystal clear.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-14-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:26 +0000 (11:08 +0800)]
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
Commit 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which
is VIRTIO_NDEV and also used as the value of "riscv,ndev" property
in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES
should include interrupt source 0 but "riscv,ndev" does not.
While we are here, we also fix the comments of platform bus irq range
which is now "64 to 96", but should be "64 to 95", introduced since
commit 1832b7cb3f64 ("hw/riscv: virt: Create a platform bus").
Fixes: 28d8c281200f ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-13-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:25 +0000 (11:08 +0800)]
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
At present magic number is used to create "riscv,ndev" property
in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that
is used to instantiate the PLIC model instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-12-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:22 +0000 (11:08 +0800)]
hw/intc: sifive_plic: Update "num-sources" property default value
At present the default value of "num-sources" property is zero,
which does not make a lot of sense, as in sifive_plic_realize()
we see s->bitfield_words is calculated by:
s->bitfield_words = (s->num_sources + 31) >> 5;
if the we don't configure "num-sources" property its default value
zero makes s->bitfield_words zero too, which isn't true because
interrupt source 0 still occupies one word.
Let's change the default value to 1 meaning that only interrupt
source 0 is supported by default and a sanity check in realize().
While we are here, add a comment to describe the exact meaning of
this property that the number should include interrupt source 0.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-9-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:21 +0000 (11:08 +0800)]
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
The realize() callback has an errp for us to propagate the error up.
While we are here, correct the wrong multi-line comment format.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-8-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:20 +0000 (11:08 +0800)]
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
At present the PLIC config parser can only handle legal config string
like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is
given the parser won't get the correct configuration.
This commit improves the config parser to make it more robust.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-7-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:16 +0000 (11:08 +0800)]
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
Since commit ef6310064820 ("hw/riscv: opentitan: Update to the latest build")
the IBEX PLIC model was replaced with the SiFive PLIC model in the
'opentitan' machine but we forgot the add the dependency there.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-3-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:15 +0000 (11:08 +0800)]
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in both riscv_aplic_realize() and
riscv_imsic_realize().
Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Sun, 11 Dec 2022 03:08:14 +0000 (11:08 +0800)]
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in sifive_plic_realize().
Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from
RISC-V machines.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Christoph Muellner [Wed, 5 Oct 2022 14:49:48 +0000 (16:49 +0200)]
RISC-V: Add Zawrs ISA extension support
This patch adds support for the Zawrs ISA extension.
Given the current (incomplete) implementation of reservation sets
there seems to be no way to provide a full emulation of the WRS
instruction (wake on reservation set invalidation or timeout or
interrupt). Therefore, we just exit the TB and return to the main loop.
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Note, that the Zawrs extension is frozen, but not ratified yet.
Changes since v3:
* Remove "RFC" since the extension is frozen
* Rebase on master and fix integration issues
* Fix entry ordering in extension list
Changes since v2:
* Rebase on master and resolve conflicts
* Adjustments according to a specification change
* Inline REQUIRE_ZAWRS() since it has only one user
Changes since v1:
* Adding zawrs to the ISA string that is passed to the kernel
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Wed, 7 Dec 2022 09:00:37 +0000 (17:00 +0800)]
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when
leaving M-mode.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Wed, 7 Dec 2022 09:00:36 +0000 (17:00 +0800)]
target/riscv: Simplify helper_sret() a little bit
There are 2 paths in helper_sret() and the same mstatus update codes
are replicated. Extract the common parts to simplify it a little bit.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Mon, 5 Dec 2022 06:53:03 +0000 (14:53 +0800)]
target/riscv: Fix mret exception cause when no pmp rule is configured
The priv spec v1.12 says:
If no PMP entry matches an M-mode access, the access succeeds. If
no PMP entry matches an S-mode or U-mode access, but at least one
PMP entry is implemented, the access fails. Failed accesses generate
an instruction, load, or store access-fault exception.
At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.
Fixes: d102f19a2085 ("target/riscv/pmp: Raise exception if no PMP entry is configured") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jim Shu [Sun, 27 Nov 2022 16:57:46 +0000 (16:57 +0000)]
hw/intc: sifive_plic: fix out-of-bound access of source_priority array
If the number of interrupt is not multiple of 32, PLIC will have
out-of-bound access to source_priority array. Compute the number of
interrupt in the last word to avoid this out-of-bound access of array.
Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221127165753.30533-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Conor Dooley [Thu, 17 Nov 2022 22:55:18 +0000 (22:55 +0000)]
hw/{misc, riscv}: pfsoc: add system controller as unimplemented
The system controller on PolarFire SoC is access via a mailbox. The
control registers for this mailbox lie in the "IOSCB" region & the
interrupt is cleared via write to the "SYSREG" region. It also has a
QSPI controller, usually connected to a flash chip, that is used for
storing FPGA bitstreams and used for In-Application Programming (IAP).
Linux has an implementation of the system controller, through which the
hwrng is accessed, leading to load/store access faults.
Add the QSPI as unimplemented and a very basic (effectively
unimplemented) version of the system controller's mailbox. Rather than
purely marking the regions as unimplemented, service the mailbox
requests by reporting failures and raising the interrupt so a guest can
better handle the lack of support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221117225518.4102575-4-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Conor Dooley [Thu, 17 Nov 2022 22:55:17 +0000 (22:55 +0000)]
hw/riscv: pfsoc: add missing FICs as unimplemented
The Fabric Interconnect Controllers provide interfaces between the FPGA
fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered
0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and
does not show up on the MSS memory map. FIC4 is dedicated to the User
Crypto Processor and does not show up on the MSS memory map either.
FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1
are represented in QEMU, leading to load access violations while booting
Linux for Icicle if PCIe is enabled as the root port is connected via
either FIC 0 or 1.
Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-3-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Conor Dooley [Thu, 17 Nov 2022 22:55:16 +0000 (22:55 +0000)]
hw/misc: pfsoc: add fabric clocks to ioscb
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by
"Clock Conditioning Circuitry" in the FPGA. The specific clock depends
on the FPGA bitstream & can be locked to one particular {D,P}LL - in the
Icicle Kit Reference Design v2022.09 or later this is/will be the case.
Linux v6.1+ will have a driver for this peripheral and devicetrees that
previously relied on "fixed-frequency" clock nodes have been switched
over to clock-controller nodes. The IOSCB region is represented in QEMU,
but the specific region of it that the CCCs occupy has not so v6.1-rcN
kernels fail to boot in QEMU.
Add the regions as unimplemented so that the status-quo in terms of boot
is maintained.
Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-2-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Fri, 25 Nov 2022 05:03:54 +0000 (13:03 +0800)]
target/riscv: Add some comments for sstatus CSR in riscv_cpu_dump_state()
sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.
Add some comments for this to let people know this is intentional.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jim Shu [Wed, 23 Nov 2022 09:06:29 +0000 (09:06 +0000)]
target/riscv: support cache-related PMU events in virtual mode
let tlb_fill() function also increments PMU counter when it is from
two-stage translation, so QEMU could also monitor these PMU events when
CPU runs in VS/VU mode (like running guest OS).
Signed-off-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221123090635.6574-1-jim.shu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Frédéric Pétrot [Mon, 14 Nov 2022 13:51:22 +0000 (14:51 +0100)]
hw/intc: sifive_plic: Renumber the S irqs for numa support
Commit 40244040a7a changed the way the S irqs are numbered. This breaks when
using numa configuration, e.g.:
./qemu-system-riscv64 -nographic -machine virt,dumpdtb=numa-tree.dtb \
-m 2G -smp cpus=16 \
-object memory-backend-ram,id=mem0,size=512M \
-object memory-backend-ram,id=mem1,size=512M \
-object memory-backend-ram,id=mem2,size=512M \
-object memory-backend-ram,id=mem3,size=512M \
-numa node,cpus=0-3,memdev=mem0,nodeid=0 \
-numa node,cpus=4-7,memdev=mem1,nodeid=1 \
-numa node,cpus=8-11,memdev=mem2,nodeid=2 \
-numa node,cpus=12-15,memdev=mem3,nodeid=3
leads to:
Unexpected error in object_property_find_err() at ../qom/object.c:1304:
qemu-system-riscv64: Property 'riscv.sifive.plic.unnamed-gpio-out[8]' not
found
This patch makes the nubering of the S irqs identical to what it was before.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Message-Id: <20221114135122.1668703-1-frederic.petrot@univ-grenoble-alpes.fr> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Thu, 13 Oct 2022 06:29:46 +0000 (14:29 +0800)]
target/riscv: Add itrigger_enabled field to CPURISCVState
Avoid calling riscv_itrigger_enabled() when calculate the tbflags.
As the itrigger enable status can only be changed when write
tdata1, migration load or itrigger fire, update env->itrigger_enabled
at these places.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Thu, 13 Oct 2022 06:29:45 +0000 (14:29 +0800)]
target/riscv: Enable native debug itrigger
When QEMU is not in icount mode, execute instruction one by one. The
tdata1 can be read directly.
When QEMU is in icount mode, use a timer to simulate the itrigger. The
tdata1 may be not right because of lazy update of count in tdata1. Thus,
We should pack the adjusted count into tdata1 before read it back.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-4-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Thu, 13 Oct 2022 06:29:44 +0000 (14:29 +0800)]
target/riscv: Add itrigger support when icount is enabled
The max count in itrigger can be 0x3FFF, which will cause a no trivial
translation and execution overload.
When icount is enabled, QEMU provides API that can fetch guest
instruction number. Thus, we can set an timer for itrigger with
the count as deadline.
Only when timer expires or priviledge mode changes, do lazy update
to count.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-3-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Thu, 13 Oct 2022 06:29:43 +0000 (14:29 +0800)]
target/riscv: Add itrigger support when icount is not enabled
When icount is not enabled, there is no API in QEMU that can get the
guest instruction number.
Translate the guest code in a way that each TB only has one instruction.
After executing the instruction, decrease the count by 1 until it reaches 0
where the itrigger fires.
Note that only when priviledge matches the itrigger configuration,
the count will decrease.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-2-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a mechanism to generate a virtual instruction
instruction exception instead of an illegal instruction exception
during instruction decode when virt is enabled.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-4-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Mayuresh Chitale [Sun, 16 Oct 2022 12:47:23 +0000 (18:17 +0530)]
target/riscv: smstateen check for h/s/envcfg
Accesses to henvcfg, henvcfgh and senvcfg are allowed only if the corresponding
bit in mstateen0/hstateen0 is enabled. Otherwise an illegal instruction trap is
generated.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-3-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Wilfred Mallawa [Tue, 25 Oct 2022 04:33:36 +0000 (14:33 +1000)]
hw/riscv/opentitan: bump opentitan
This patch updates the OpenTitan model to match
the specified register layout as per [1]. Which is also the latest
commit of OpenTitan supported by TockOS.
Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes
any references to Padctrl. Note: OpenTitan doc [2] has not yet specified
much detail regarding this, except for a note that states `TODO: this
section needs to be updated to reflect the pinmux/padctrl merger`
Richard Henderson [Sun, 23 Oct 2022 23:33:37 +0000 (09:33 +1000)]
tcg/riscv: Fix base register for user-only qemu_ld/st
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.
Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.
Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard Henderson [Thu, 20 Oct 2022 23:38:36 +0000 (09:38 +1000)]
tcg/riscv: Fix reg overlap case in tcg_out_addsub2
There was a typo using opc_addi instead of opc_add with the
two registers. While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Richard Henderson [Sat, 22 Oct 2022 09:58:21 +0000 (19:58 +1000)]
tcg/riscv: Fix range matched by TCG_CT_CONST_M12
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
LIU Zhiwei [Wed, 12 Oct 2022 06:00:16 +0000 (14:00 +0800)]
target/riscv: Fix PMP propagation for tlb
Only the pmp index that be checked by pmp_hart_has_privs can be used
by pmp_get_tlb_size to avoid an error pmp index.
Before modification, we may use an error pmp index. For example,
we check address 0x4fc, and the size 0x4 in pmp_hart_has_privs. If there
is an pmp rule, valid range is [0x4fc, 0x500), then pmp_hart_has_privs
will return true;
However, this checked pmp index is discarded as pmp_hart_has_privs
return bool value. In pmp_is_range_in_tlb, it will traverse all pmp
rules. The tlb_sa will be 0x0, and tlb_ea will be 0xfff. If there is
a pmp rule [0x10, 0x14), it will be misused as it is legal in
pmp_get_tlb_size.
As we have already known the correct pmp index, just remove the
remove the pmp_is_range_in_tlb and get tlb size directly from
pmp_get_tlb_size.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221012060016.30856-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Peter Maydell [Thu, 5 Jan 2023 21:04:52 +0000 (21:04 +0000)]
Merge tag 'pull-target-arm-20230105' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement AArch32 ARMv8-R support
* Add Cortex-R52 CPU
* fix handling of HLT semihosting in system mode
* hw/timer/ixm_epit: cleanup and fix bug in compare handling
* target/arm: Coding style fixes
* target/arm: Clean up includes
* nseries: minor code cleanups
* target/arm: align exposed ID registers with Linux
* hw/arm/smmu-common: remove unnecessary inlines
* i.MX7D: Handle GPT timers
* i.MX7D: Connect IRQs to GPIO devices
* i.MX6UL: Add a specific GPT timer instance
* hw/net: Fix read of uninitialized memory in imx_fec
* tag 'pull-target-arm-20230105' of https://git.linaro.org/people/pmaydell/qemu-arm: (34 commits)
hw/net: Fix read of uninitialized memory in imx_fec.
i.MX7D: Connect IRQs to GPIO devices.
i.MX6UL: Add a specific GPT timer instance for the i.MX6UL
i.MX7D: Compute clock frequency for the fixed frequency clocks.
i.MX7D: Connect GPT timers to IRQ
hw/arm/smmu-common: Avoid using inlined functions with external linkage
hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scope
target/arm: align exposed ID registers with Linux
hw/arm/nseries: Silent -Wmissing-field-initializers warning
hw/arm/nseries: Constify various read-only arrays
hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo arg
target/arm: cleanup cpu includes
target/arm: Remove unused includes from helper.c
target/arm: Remove unused includes from m_helper.c
target/arm: Fix checkpatch brace errors in helper.c
target/arm: Fix checkpatch space errors in helper.c
target/arm: Fix checkpatch comment style warnings in helper.c
hw/timer/imx_epit: fix compare timer handling
hw/timer/imx_epit: remove explicit fields cnt and freq
hw/timer/imx_epit: factor out register write handlers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 11 Nov 2022 00:09:37 +0000 (10:09 +1000)]
tcg: Reorg function calls
Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array. This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.
For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.
For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 11 Nov 2022 05:10:51 +0000 (15:10 +1000)]
tcg: Use output_pref wrapper function
We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot). Avoid
direct references to op->output_pref[] when possible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 18 Dec 2022 21:18:32 +0000 (22:18 +0100)]
tcg: Vary the allocation size for TCGOp
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
Philippe Mathieu-Daudé [Sun, 18 Dec 2022 21:18:31 +0000 (22:18 +0100)]
tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Richard Henderson [Thu, 10 Nov 2022 13:18:52 +0000 (23:18 +1000)]
accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
Better to re-use the existing function for copying ops.
Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 10 Nov 2022 13:16:36 +0000 (23:16 +1000)]
accel/tcg/plugin: Avoid duplicate copy in copy_call
We copied all of the arguments in copy_op_nocheck.
We only need to replace the one argument that we change.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / qemu-nvme.git / log