Pierre-Louis Bossart [Mon, 4 Oct 2021 21:21:41 +0000 (16:21 -0500)]
ASoC: soc-pcm: restore mixer functionality
Recent changes in soc-pcm completely broke basic support for mixers on
Intel systems: the filters on BE states prevent the connection of a
second mixer input while the back-end is already active.
Rather than reverting the changes, which would be problematic for
Tegra systems, this patch suggests an additional filter which will
only apply to Tegra systems. This is a temporary solution which will
have to be revisited - additional issues have been reported with DPCM.
Fixes: 0c25db3f7621 ('ASoC: soc-pcm: Don't reconnect an already active BE') Suggested-by: Sameer Pujar <spujar@nvidia.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211004212141.193136-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Derek Fang [Thu, 7 Oct 2021 08:55:19 +0000 (16:55 +0800)]
ASoC: rt5682s: Fix hp pop produced immediately after resuming
When the system plays a sound immediately after resuming from S3,
it could hear a little pop from headphones.
It is due to the HP was unmuted before the completion of
jack re-detection finished in parallel.
This patch adds a lock to make sure the HP unmute after jack detect handler,
and adds a few depop changes.
Peter Ujfalusi [Wed, 6 Oct 2021 11:16:51 +0000 (14:16 +0300)]
ASoC: SOF: pipelines: Harmonize all functions to use struct snd_sof_dev
First thing the pipelines function which have "struct device *dev" as
parameter do is:
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
and in all cases the passed dev is actually coming from sdev->dev.
Skip this steps and pass directly the sdev to all pipelines related
functions as few of them already does this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211006111651.10027-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Ranjani Sridharan [Wed, 6 Oct 2021 10:40:41 +0000 (13:40 +0300)]
ASoC: SOF: topology: do not power down primary core during topology removal
When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.
Fixes: 0dcdf84289fb ("ASoC: SOF: add a "core" parameter to widget loading functions") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211006104041.27183-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 5 Oct 2021 15:25:24 +0000 (16:25 +0100)]
Merge series "ASoC: Intel: machine driver updates for 5.16" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One quirk for a Dell TigerLake/SoundWire device, and initial support
for platforms based on the ES8336 codec (aka ES8316). For full
functionality, an update of the codec driver will be needed.
Pierre-Louis Bossart (5):
ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on
ES8336 codec
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on
ES8336 codec
ASoC: Intel: add machine driver for SOF+ES8336
ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp
ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45
Mark Brown [Tue, 5 Oct 2021 15:25:23 +0000 (16:25 +0100)]
Merge series "ASoC: SOF: Intel: add flags to turn on SSP clocks early" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With the chip shortage, some GeminiLake Intel-based designs were
respun and now rely on codecs that need the SSP bit clock turned on in
the hw_params stage, not the trigger stage. This patchset mirrors the
flags added in the SOF DAI_CONFIG IPC, and sets the flags when this
capability is indicated as necessary in the topology files where the
SSP configuration is stored.
We initially considered a more generic solution with an on-demand SSP
clock activation using the common clock framework. This would be a
more elegant solution indeed, but it would have required more
intrusive changes that would conflict with the SOF multi-client
support (in-development), and more backport hassles on product
branches. The on-demand activation of clocks is still a desired
feature that will be enabled at a later point.
Pierre-Louis Bossart (4):
ASoC: SOF: dai: mirror group_id definition added in firmware
ASoC: SOF: dai: include new flags for DAI_CONFIG
ASoC: SOF: Intel: hda: add new flags for DAI_CONFIG
ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic
pipelines
Mark Brown [Tue, 5 Oct 2021 15:25:22 +0000 (16:25 +0100)]
Merge series "ASoC: SOF: topology: minor updates" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two patches to visualize settings and override dynamic pipelines + one
correction for errors on connections.
Pierre-Louis Bossart (2):
ASoC: SOF: topology: show clks_control value in dynamic debug
ASoC: SOF: topology: allow for dynamic pipelines override for debug
The struct cz_aif1_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:27:28 +0000 (16:27 -0500)]
ASoC: SOF: topology: allow for dynamic pipelines override for debug
For debug and community support, it's useful to expose a kernel
parameter to prevent the use of dynamic pipelines exposed in a
topology file, or conversely to force an existing topology to use
dynamic pipelines.
Add an override bit and an enable bit which is valid only when the
override is set.
For products, the intent is that the topology file defines the
behavior, these two bits are only intended for diagnosis and
performance checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20211004212729.199550-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:27:27 +0000 (16:27 -0500)]
ASoC: SOF: topology: show clks_control value in dynamic debug
We log most of the SSP configurations except the clks_control. This
will be used to enable bclk/mclk early start so it's useful to show
the information to the user.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211004212729.199550-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 17:14:30 +0000 (12:14 -0500)]
ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic pipelines
In order to keep the widget use_count balanced, make sure the DAI
widgets are allocated once in hw_params and released in hw_free. A
'setup' status flag is used to deal with cases where the .hw_params
callback is invoked multiple times, and likewise with cases where
hw_free is invoked without hw_params being called first (which can
happen if the FE hw_params fails).
In addition, this patch frees the widgets in the suspend transition,
and reallocates them in the .prepare callback. The 'setup' flag helps
in this case differentiate between resume (setup needed) and
xruns (setup not needed).
This balanced operation was not needed previously but will be required
when SOF dynamic pipelines are enabled.
Pierre-Louis Bossart [Mon, 4 Oct 2021 17:14:27 +0000 (12:14 -0500)]
ASoC: SOF: dai: include new flags for DAI_CONFIG
Mirror changes done in SOF tree. The changes do not rely on
BIT/GENMASK on purpose to keep the structure and flags common with the
firmware tree.
The DAI_CONFIG IPC is currently used in multiple ways. It is sent to
the DSP firmware when enabling static or dynamic pipelines, in
hw_params or prepare callbacks for Intel SSP, HDaudio and ALH, on
trigger_stop and hw_free.
This IPC has been abused a bit in the past, i.e. the values used for
some of the DAI-specific fields are used to either allocate or free
resources. Two typical examples are Intel HDaudio and SoundWire/ALH
DAIs, where using a zero DMA channel number or stream tag signals to
the firmware the DMA channels or tags allocated earlier can be freed.
Rather than add a new IPC for 'hw_params' and 'hw_free', this patch
suggests supporting a 2-bit value conveying the 'stage' information in
an existing IPC structure. Only 3 possible values are used.
The mapping between HW_PARAMS and HW_FREE flags and ALSA definitions
is not strictly 1:1, e.g. in some cases the HW_PARAM flag might be set
during the .prepare callback, while the HW_FREE might be sent during the
ALSA .trigger for stop/suspend.
The semantics of the flags is to reserve and start/stop all needed
resources, typically hardware related such as DMAs or clocks, when the
HW_PARAMS is set, while the HW_FREE flag allows the firmware to
release the resources allocated. The data transfers are still
controlled within the firmware through the propagation of the trigger
command.
The driver can then pass information that the DAI_CONFIG was invoked
in e.g. a pipeline/DAI setup, hw_params or hw_free stage without
having to use a special DAI-specific encoding. Unfortunately we can't
remove old encodings due to backwards-compatibility requirements but
for new cases, such as the SSP in follow-up patches, we can make the
IPC less cryptic.
This change is tagged as ABI 3.19 and is completely backwards compatible.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211004171430.103674-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 17:14:26 +0000 (12:14 -0500)]
ASoC: SOF: dai: mirror group_id definition added in firmware
This was added in ABI 3.17 but never added to the kernel tree. The
group_id is not currently used but this patch is required before
additional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211004171430.103674-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:10 +0000 (16:35 -0500)]
ASoC: Intel: add machine driver for SOF+ES8336
Add machine driver to support APL/GLK/TGL platforms.
The TGL platform supports DMIC, APL and GLK do not.
Co-developed-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:09 +0000 (16:35 -0500)]
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
Co-developed-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:08 +0000 (16:35 -0500)]
ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec
A number of devices, such as the "Chuwi HI10x" and "UNIQCELL Q15.6",
are based on APL/GLK with an I2C/I2S ES8336 codec.
Add table to find topology and firmware files.
Co-developed-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sat, 2 Oct 2021 21:14:59 +0000 (23:14 +0200)]
ASoC: Intel: cht_bsw_nau8824: Set card.components string
Set the card.components string using the new nau8824_components() helper
which returns a components string based on the DMI quirks inside the
nau8824 codec driver.
Hans de Goede [Sat, 2 Oct 2021 21:14:58 +0000 (23:14 +0200)]
ASoC: nau8824: Add a nau8824_components() helper
Some devices using the NAU8824 have only one speaker. To still have things
working properly this requires the left + right channels to both be mixed
to the left speaker output.
This mixer setup is done by userspace based on UCM profiles. But this
requires userspace to know that there is a mono-speaker. Add a helper
function (for the machine driver) to get a components string providing
this info.
This is done inside the codec driver because the codec driver already
has a DMI quirk table.
Seven Lee [Fri, 1 Oct 2021 10:31:08 +0000 (18:31 +0800)]
ASoC: nau8821: new driver
The driver is for codec NAU88L21 of Nuvoton Technology Corporation.
The NAU88L21 is an ultra-low power high performance audio codec that
supports both analog and digital audio functions.
Mark Brown [Fri, 1 Oct 2021 22:44:28 +0000 (23:44 +0100)]
Merge series "Add support for on demand pipeline setup/destroy" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The previous, v2 of this series was sent by Daniel Baluta:
https://lore.kernel.org/alsa-devel/20210917143659.401102-1-daniel.baluta@oss.nxp.com/
We have agreed that it might be better that someone from Intel is going to take it
from here as we already have the infrastructure up to test and verify the
dynamic pipelines support.
Changes since v2 (sent by Daniel Baluta):
- patch 10: Fix NULL point dereference in hda_dai_update_config()
- I have kept Daniel's SoB for the series.
Changes since v1:
- Signed-off-by tag added by Daniel
This series implements initial support for dynamic pipelines to setup/teardown
pipeline as needed when a PCM is open/closed.
Initially dynamic pipelines are only supported with single core setup which will
be expanded with a follow-up series.
Review with SOF community at
https://github.com/thesofproject/linux/pull/2794
The feature has been merged on 1st of April to sof-dev, all issues found since
has been fixed and squashed to this upstream series.
Regards,
Peter
---
Ranjani Sridharan (12):
ASoC: topology: change the complete op in snd_soc_tplg_ops to return
int
ASoC: SOF: control: Add access field in struct snd_sof_control
ASoC: SOF: topology: Add new token for dynamic pipeline
ASoC: SOF: sof-audio: add helpers for widgets, kcontrols and dai
config set up
AsoC: dapm: export a couple of functions
ASoC: SOF: Add new fields to snd_sof_route
ASoC: SOF: restore kcontrols for widget during set up
ASoC: SOF: Don't set up widgets during topology parsing
ASoC: SOF: Introduce widget use_count
ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC
ASoC: SOF: Add support for dynamic pipelines
ASoC: SOF: topology: Add kernel parameter for topology verification
ASoC: fsl_spdif: implement bypass mode from in to out
Implement SPDIF bypass mode. It implies internal SoC
routing of SPDIF input signal to SPDIF output signal. The
test bed requires two boards: B1 configured in bypass mode,
and B2 to feed B1 SPDIF RX port and read B1 SPDIF TX port:
B2 TX -> B1 RX,
B2 RX <- B1 TX.
The test procedure:
a) Boot both boards
b) B2: start "arecord <spdifcard> -r 48kHz | aplay <local DAC>"
c) B2: start "aplay <spdifcard> -r 48kHz <2ch 48kHz audio file>"
d) B1: enable bypass mode:
amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' on
e) B2: check DAC audio, make sure the same sample rate is used at
steps b) and c), in example above the rate is 48kHz.
f) B1: try to run "aplay" or "arecord" on imxspdif card while in
bypass mode - both must fail until bypass mode is disabled
g) B1: disable bypass mode:
amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' off
h) B1: check the usual playback and capture on imxspdif card.
During this test try to set bypass mode - must not be allowed
while playback or capture is running.
ASoC: SOF: topology: Add kernel parameter for topology verification
Add a kernel debug flag to enable a one-shot topology
verification for all pipelines including the dynamic
ones. If the debug flag is set, all the topology
component loading will be verified during the complete
callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-13-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for dynamic pipelines by modifying the PCM
hw_params ioctl implementation to determine the widgets
required for a PCM stream by querying the list of
connected DAPM widgets. This list is saved as part of
snd_sof_pcm_stream struct and will be used to setup the widgets.
The sof_widget_list_setup/free routines setup and free connected
DAPM widgets when a PCM is opened/closed. These routines accept
a list of connected DAPM widgets as input and determine the SOF
widgets, their corresponding pipeline widgets and connections
between them that need to be setup before the PCM is triggered.
Please note that the dynamic pipeline feature will only be enabled
for those pipelines whose dynamic_pipeline_widget flag is set in
topologies. Add a new token called SOF_TKN_SCHED_DYNAMIC_PIPELINE
that when set in topology will be applied to the
dynamic_pipeline_widget flag of the pipeline widget.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-12-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC
With the implementation of the dynamic pipeline feature, widgets
will only be setup when a PCM is opened during the
hw_params ioctl. The BE hw_params callback is responsible for
sending the DAI_CONFIG for the DAI widgets in the DSP.
With dynamic pipelines, the DAI widgets will need to set up
first before sending the DAI_CONFIG IPC in the BE hw_params.
Update the BE hw_params/hw_free callbacks for all ALH, HDA and SSP
DAIs to set up/free the DAI widget before/after DAI_CONFIG IPC.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-11-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field, use_count to struct snd_sof_widget to keep track
of the usage count for each widget. Since widgets can belong to
multiple pipelines, this field will ensure that the widget
is setup only when the first pipeline that needs it is started
and freed when the last pipeline that needs it is stopped. There is
no need to protect the widget use_count access as the core already
handles mutual exclusion at the PCM level.
Add a new helper sof_widget_free() to handle freeing the SOF
widgets and export the sof_widget_setup/free() functions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-10-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Don't set up widgets during topology parsing
In preparation for supporting dynamic pipelines, move the
widget setup, DAI config IPCs to the complete callback
during topology loading. For current topology where all
the pipelines are static, all the pipelines will be set up
during complete. For topologies with dynamic and static pipelines,
this will enable setting up only the static ones during
topology loading. Reuse the sof_restore_pipelines() function for
this purpose and rename it to sof_set_up_pipelines().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-9-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add two new fields to save the source widget and sink widget
pointers in struct snd_sof_route to make it easier to look up
routes by source/sink widget. Also, add a flag to indicate
if the route has been set up in the DSP. These will be used
when the dynamic pipeline feature is implemented and routes
will have to be set up at run time.
Also, add a new sof_tear_down_pipelines() callback, that will
used to reset the set up status for all routes during suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-7-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: sof-audio: add helpers for widgets, kcontrols and dai config set up
Refactor the existing code to use helper functions to
set up/free widgets, send dai config and set up kcontrols for
widgets. These will be reused later on for setting up widgets in
the connected DAPM widgets list for a particular PCM when the
dynamic pipeline feature is implemented.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: topology: Add new token for dynamic pipeline
Today, we set up all widgets required for all PCM streams
at the time of topology parsing even if they are not
used. An optimization would be to only set up the widgets
required for currently active PCM streams. This would give
the FW the opportunity to power gate unused memory blocks,
thereby saving power.
For dynamic pipelines, the widgets in the connected DAPM path
for each PCM will need to be set up at runtime. This patch
introduces a new token, DYNAMIC_PIPELINE, for scheduler type
widgets that indicate whether a pipeline should be set up
statically during topology load or at runtime when the PCM is
opened. Introduce a new field called dynamic_pipeline_widget
in struct snd_sof_widget to save the value of the parsed token.
The token is set only for the pipeline (scheduler type)
widget and must be propagated to all widgets in the same
pipeline during topology load. Introduce another field called
pipe_widget in struct snd_sof_widget that saves the pointer to
the scheduler widget with the same pipeline ID as that of the
widget. This field is populated when the pipeline completion
callback is invoked during topology loading.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: control: Add access field in struct snd_sof_control
Add a new field to save the access setting for all controls
in struct snd_sof_control. This will be used to ensure that
only widgets belonging to static pipelines have volatile
controls.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: topology: change the complete op in snd_soc_tplg_ops to return int
In the SOF driver, the operations performed in the complete callback
can fail and therefore topology loading should return an error in
such cases. So, change the signature of the complete op
in struct snd_soc_tplg_ops to return an int to return the error.
Also, amend the complete callback functions in the SOF driver and
the SKL driver to conform with the new signature.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210927120517.20505-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Rikard Falkeborn [Fri, 1 Oct 2021 11:50:30 +0000 (13:50 +0200)]
ASoC: qcom: apq8096: Constify static snd_soc_ops
The struct iapq8096_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Derek Fang [Fri, 1 Oct 2021 07:41:13 +0000 (15:41 +0800)]
ASoC: rt5682s: Fix HP noise caused by SAR mode switch when the system resumes
When the system resumes from S3, if the system plays a beep,
there is continuous "Zizi.." noise from HP that could be heard.
It is caused by the SAR mode switch during the combo jack
re-detection which be executed parallelly in a workqueue
after the system resumes.
This patch changes the behavior of SAR mode switch to
avoid this issue.
Derek Fang [Fri, 1 Oct 2021 07:41:12 +0000 (15:41 +0800)]
ASoC: rt5682s: Enable ASRC auto-disable to fix pop during jack plug-in while playback
When codec's ASRC was enabled, the DA and AD filters use
the reference clk which tracks the I2S clks.
And if the I2S clks' timing of open and close are not expected,
this patch allows the filters to switch to use sysclk if
ASRC's ref clks disappeared and could fix the below possible issues:
1. Avoid DA filter to keep surplus samples.
2. Avoid that AD filter works failed during dapm's power on.
For example,
if I2S clks were closed before dacdat during playback off
due to jack unplug, it causes ref clks disappeared and
DA filter remained some samples which will produce pop noise
on the next HP playback.
ASRC auto-disable could clear the samples during the playback off.
Trevor Wu [Fri, 1 Oct 2021 03:16:01 +0000 (11:16 +0800)]
ASoC: mediatek: mt8195: move of_node_put to remove function
platforms->of_node and codes->of_node are assigned in probe function,
and of_node_put is called at the end of probe function, because of_node
seems to be not used after probe functon
In this patch, of_node_put is moved to platform remove function in case
of_node is used at any occasions after probe function in the future.
Malik_Hsu [Fri, 1 Oct 2021 15:03:16 +0000 (23:03 +0800)]
ASoC: Intel: sof_rt5682: Add support for max98360a speaker amp
Add a board config adl_mx98360a_rt5682 to support alc5682 headset
codec and max98360a speaker amplifier. Follow Intel BT offload design
by connecting alc5682 to SSP0 and max98360a to SSP1.
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211001150316.414141-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Rikard Falkeborn [Fri, 1 Oct 2021 11:45:17 +0000 (13:45 +0200)]
ASoC: tegra: Constify static snd_soc_ops
The struct tegra_machine_snd_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Simon Trimmer [Thu, 30 Sep 2021 14:21:16 +0000 (15:21 +0100)]
ASoC: soc-component: Remove conditional definition of debugfs data members
This simplification allows the use of the standard kernel pattern of
static inline dummy functions for debugfs code. Most systems will only
have a small number of snd_soc_components so the memory impact is
minimal.
Jack Yu [Wed, 29 Sep 2021 05:43:44 +0000 (13:43 +0800)]
ASoC: rt5682: move clk related code to rt5682_i2c_probe
The DAI clock is only used in I2S mode, to make it clear
and to fix clock resource release issue, we move CCF clock
related code to rt5682_i2c_probe to fix clock
register/unregister issue.
Peter Ujfalusi [Thu, 30 Sep 2021 07:04:38 +0000 (10:04 +0300)]
ASoC: SOF: Change SND_SOC_SOF_TOPLEVEL from config to menuconfig
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF
adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are
added.
It will make the menuconfig user experience much cleaner if we move the
SOF options under a separate page.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210930070438.16846-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The struct mop500_ab8500_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
These are only assigned to the ops field in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Brent Lu [Mon, 27 Sep 2021 14:32:49 +0000 (22:32 +0800)]
ASoC: intel: sof_rt5682: update platform device name for Maxim amplifier
To follow 20-character length limitation of platform device name, we
have only 7 character space for amplifier. Therefore, the last
character of mx98357a and mx98360a is removed to save space.
Signed-off-by: Brent Lu <brent.lu@intel.com> Fixes: e224ef76fa8a ('ASoC: intel: sof_rt5682: support jsl_rt5682s_mx98360a board') Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210927143249.439129-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 28 Sep 2021 07:36:15 +0000 (10:36 +0300)]
ASoC: SOF: ipc: Make the error prints consistent in tx_wait_done()
If we get an error on reply (msg->reply_error) then we should print the
error value out.
At the same time extend the print to include the message size as well and
do the same in case of a timeout.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210928073615.29574-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Marc Herbert [Tue, 28 Sep 2021 10:26:35 +0000 (13:26 +0300)]
ASoC: SOF: prefix some terse and cryptic dev_dbg() with __func__
These helped troubleshoot some DMA issue in SOF.
Signed-off-by: Marc Herbert <marc.herbert@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210928102635.26227-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: add error handling to snd_sof_ipc_msg_data()
If an invalid stream is passed to snd_sof_ipc_msg_data() it won't
fill the provided object with data. The caller has to be able to
recognise such cases to avoid handling invalid data. Make the
function return an error when failing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210928103516.8066-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse (make C=2) complains about undeclared variables. Fix by adding
a real prototype instead of 'extern' in sof-of-dev.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210928072807.27838-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 28 Sep 2021 08:17:44 +0000 (11:17 +0300)]
ASoC: SOF: Intel: hda-stream: Print stream name on STREAM_SD_OFFSET timeout
In order to provide more information in case of timeout observed while
reading STREAM_SD_OFFSET, print out the stream name or in case there is
no audio stream associated (like dma-trace), print "--"
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210928081744.4785-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 27 Sep 2021 17:32:10 +0000 (18:32 +0100)]
Merge series "add driver to support firmware loading on Cirrus Logic DSPs" from Simon Trimmer <simont@opensource.cirrus.com>:
This series of patches gradually separates the ASoC specific wm_adsp
code from that required to manage firmware in Cirrus Logic DSPs.
The series starts with renaming, progresses to splitting the
functionality before finally moving the independent functionality into
drivers/firmware so that it can be used by both the existing ASoC
wm_adsp and new non-audio parts.
Charles Keepax (3):
ASoC: wm_adsp: Move check for control existence
ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed
buffers
ASoC: wm_adsp: Move sys_config_size to wm_adsp
Simon Trimmer (13):
ASoC: wm_adsp: Remove use of snd_ctl_elem_type_t
ASoC: wm_adsp: Cancel ongoing work when removing controls
ASoC: wm_adsp: Rename generic DSP support
ASoC: wm_adsp: Introduce cs_dsp logging macros
ASoC: wm_adsp: Separate some ASoC and generic functions
ASoC: wm_adsp: Split DSP power operations into helper functions
ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling
ASoC: wm_adsp: Move check of dsp->running to better place
ASoC: wm_adsp: Pass firmware names as parameters when starting DSP
core
ASoC: wm_adsp: move firmware loading to client
ASoC: wm_adsp: Split out struct cs_dsp from struct wm_adsp
ASoC: wm_adsp: Separate wm_adsp specifics in cs_dsp_client_ops
firmware: cs_dsp: add driver to support firmware loading on Cirrus
Logic DSPs
Currently, The fixed 512KB prealloc buffer size is too larger for
tiny memory kernel (such as 16MB memory). This patch adds the module
option "prealloc_buffer_size_kbytes" to specify prealloc buffer size.
It's suitable for cards which use the generic dmaengine pcm driver
with no config.
The only usage of these is to assign their address to the ops field in
the snd_soc_dai_driver struct, which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Stefan Binding [Mon, 27 Sep 2021 11:14:37 +0000 (12:14 +0100)]
ASoC: cs42l42: Use two thresholds and increased wait time for manual type detection
Some headsets require very different comparator thresholds for type detection,
as well as longer settling times. In order to detect a larger number of headsets,
use 2 thresholds to give maximum coverage (1.25V and 1.75V), as well as a longer
settling time of 100ms. This will not affect default audotodetect mode
and applies to manual mode type detection only.
In file included from include/linux/io.h:13,
from sound/soc/samsung/s3c-i2s-v2.c:16:
sound/soc/samsung/s3c-i2s-v2.c: In function 's3c2412_i2s_trigger':
arch/arm/include/asm/io.h:92:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
#define __raw_writel __raw_writel
^
arch/arm/include/asm/io.h:299:29: note: in expansion of macro '__raw_writel'
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
arch/arm/include/asm/io.h:307:36: note: in expansion of macro 'writel_relaxed'
#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })
^~~~~~~~~~~~~~
sound/soc/samsung/s3c-i2s-v2.c:398:3: note: in expansion of macro 'writel'
writel(0x0, i2s->regs + S3C2412_IISFIC);
^~~~~~
sound/soc/samsung/s3c-i2s-v2.c:400:2: note: here
case SNDRV_PCM_TRIGGER_RESUME:
^~~~
From all I can tell, this was indeed meant to fall through, so
add "fallthrough;" statement to avoid the warning.
ASoC: wcd9335: Use correct version to initialize Class H
The versioning scheme was changed in an earlier patch, which caused the version
being used to initialize WCD9335 to be interpreted as if it was WCD937X, which
changed code paths causing broken headphones output. Pass WCD9335 instead of
WCD9335_VERSION_2_0 to wcd_clsh_ctrl_alloc to fix it.
Fixes: 19c5d1f6a0c3 ("ASoC: codecs: wcd-clsh: add new version support") Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210925022339.786296-1-y.oudjana@protonmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
projects / users / jedix / linux-maple.git / log