Linus Torvalds [Thu, 13 Feb 2025 20:06:29 +0000 (12:06 -0800)]
Merge tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
Linus Torvalds [Thu, 13 Feb 2025 19:58:11 +0000 (11:58 -0800)]
Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Just small stuff.
As a general announcement, on disk format is now frozen in my master
branch - future on disk format changes will be optional, not required.
- More fixes for going read-only: the previous fix was insufficient,
but with more work on ordering journal reclaim flushing (and a
btree node accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less
than a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs"
* tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs:
bcachefs: Reuse transaction
bcachefs: Pass _orig_restart_count to trans_was_restarted
bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS
bcachefs: Fix want_new_bset() so we write until the end of the btree node
bcachefs: Split out journal pins by btree level
bcachefs: Fix use after free
bcachefs: Fix marking reflink pointers to missing indirect extents
Linus Torvalds [Thu, 13 Feb 2025 16:43:46 +0000 (08:43 -0800)]
Merge tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus
some trival cleanups"
* tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Set host with kernel mode when switch to VM mode
LoongArch: KVM: Remove duplicated cache attribute setting
LoongArch: KVM: Fix typo issue about GCFG feature detection
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
LoongArch: Remove the deprecated notifier hook mechanism
LoongArch: Use str_yes_no() helper function for /proc/cpuinfo
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
LoongArch: Fix idle VS timer enqueue
Linus Torvalds [Thu, 13 Feb 2025 16:41:48 +0000 (08:41 -0800)]
Merge tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
Bibo Mao [Thu, 13 Feb 2025 04:02:56 +0000 (12:02 +0800)]
LoongArch: KVM: Set host with kernel mode when switch to VM mode
PRMD register is only meaningful on the beginning stage of exception
entry, and it is overwritten with nested irq or exception.
When CPU runs in VM mode, interrupt need be enabled on host. And the
mode for host had better be kernel mode rather than random or user mode.
When VM is running, the running mode with top command comes from CRMD
register, and running mode should be kernel mode since kernel function
is executing with perf command. It needs be consistent with both top and
perf command.
Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Cache attribute comes from GPA->HPA secondary mmu page table and is
configured when kvm is enabled. It is the same for all VMs, so remove
duplicated cache attribute setting on vCPU context switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Thu, 13 Feb 2025 04:02:56 +0000 (12:02 +0800)]
LoongArch: KVM: Fix typo issue about GCFG feature detection
This is typo issue and misusage about GCFG feature macro. The code
is wrong, only that it does not cause obvious problem since GCFG is
set again on vCPU context switch.
Yuli Wang [Thu, 13 Feb 2025 04:02:40 +0000 (12:02 +0800)]
LoongArch: Remove the deprecated notifier hook mechanism
The notifier hook mechanism in proc and cpuinfo is actually unnecessary
for LoongArch because it's not used anywhere.
It was originally added to the MIPS code in commit d6d3c9afaab4 ("MIPS:
MT: proc: Add support for printing VPE and TC ids"), and LoongArch then
inherited it.
But as the kernel code stands now, this notifier hook mechanism doesn't
really make sense for either LoongArch or MIPS.
In addition, the seq_file forward declaration needs to be moved to its
proper place, as only the show_ipi_list() function in smp.c requires it.
Huacai Chen [Thu, 13 Feb 2025 04:02:35 +0000 (12:02 +0800)]
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
Now kernel_page_present() always return true for KPRANGE/XKPRANGE
addresses, this isn't correct because hibernation (ACPI S4) use it
to distinguish whether a page is saveable. If all KPRANGE/XKPRANGE
addresses are considered as saveable, then reserved memory such as
EFI_RUNTIME_SERVICES_CODE / EFI_RUNTIME_SERVICES_DATA will also be
saved and restored.
Fix this by returning true only if the KPRANGE/XKPRANGE address is in
memblock.memory.
Marco Crivellari [Thu, 13 Feb 2025 04:02:35 +0000 (12:02 +0800)]
LoongArch: Fix idle VS timer enqueue
LoongArch re-enables interrupts on its idle routine and performs a
TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the idle instruction may set the
TIF_NEED_RESCHED flag. In order to deal with such a race, IRQs
interrupting __arch_cpu_idle() rollback their return address to the
beginning of __arch_cpu_idle() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __arch_cpu_idle() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop can
handle both TIF_NEED_RESCHED and pending timers.
Mark Pearson [Tue, 11 Feb 2025 17:36:11 +0000 (12:36 -0500)]
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
The recent platform profile changes prevent the tpacpi platform driver
from registering. This error is seen in the kernel logs, and the
various tpacpi entries are not created:
[ 7550.642171] platform thinkpad_acpi: Resources present before probing
This happens because devm_platform_profile_register() is called before
tpacpi_pdev probes (thanks to Kurt Borja for identifying the root
cause).
For now revert back to the old platform_profile_register to fix the
issue. This is quick fix and will be re-implemented later as more
testing is needed for full solution.
Tested on X1 Carbon G12.
Fixes: 31658c916fa6 ("platform/x86: thinkpad_acpi: Use devm_platform_profile_register()") Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250211173620.16522-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Filipe Manana [Wed, 5 Feb 2025 17:36:48 +0000 (17:36 +0000)]
btrfs: fix hole expansion when writing at an offset beyond EOF
At btrfs_write_check() if our file's i_size is not sector size aligned and
we have a write that starts at an offset larger than the i_size that falls
within the same page of the i_size, then we end up not zeroing the file
range [i_size, write_offset).
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
if (ret)
return ret;
}
So if our file's i_size is 90269 bytes and a write at offset 90365 bytes
comes in, we get 'start_pos' set to 90112 bytes, which is less than the
i_size and therefore we don't zero out the range [90269, 90365) by
calling btrfs_cont_expand().
This is an old bug introduced in commit 9036c10208e1 ("Btrfs: update hole
handling v2"), from 2008, and the buggy code got moved around over the
years.
Fix this by discarding 'start_pos' and comparing against the write offset
('pos') without any alignment.
This bug was recently exposed by test case generic/363 which tests this
scenario by polluting ranges beyond EOF with an mmap write and than verify
that after a file increases we get zeroes for the range which is supposed
to be a hole and not what we wrote with the previous mmaped write.
We're only seeing this exposed now because generic/363 used to run only
on xfs until last Sunday's fstests update.
generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad)
--- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000
+++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000
@@ -1 +1,46 @@
QA output created by 363
+READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk
+OFFSET GOOD BAD RANGE
+0x1609d 0x0000 0x3104 0x0
+operation# (mod 256) for the bad data may be 4
+0x1609e 0x0000 0x0472 0x1
+operation# (mod 256) for the bad data may be 4
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
Filipe Manana [Tue, 4 Feb 2025 11:02:32 +0000 (11:02 +0000)]
btrfs: fix stale page cache after race between readahead and direct IO write
After commit ac325fc2aad5 ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
--- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aad5 ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aad5 ("btrfs: do not hold the extent lock for entire read") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Tue, 11 Feb 2025 18:19:36 +0000 (10:19 -0800)]
Merge tag 'tomoyo-pr-20250211' of git://git.code.sf.net/p/tomoyo/tomoyo
Pull tomoyo fixes from Tetsuo Handa:
"Redo of pathname patternization and fix spelling errors"
* tag 'tomoyo-pr-20250211' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: use better patterns for procfs in learning mode
tomoyo: fix spelling errors
tomoyo: fix spelling error
Patrick Bellasi [Wed, 5 Feb 2025 14:04:41 +0000 (14:04 +0000)]
x86/cpu/kvm: SRSO: Fix possible missing IBPB on VM-Exit
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1] Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2] Reported-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Patrick Bellasi <derkling@google.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sakari Ailus [Tue, 11 Feb 2025 07:28:40 +0000 (09:28 +0200)]
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sakari Ailus [Tue, 11 Feb 2025 07:28:39 +0000 (09:28 +0200)]
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Kent Overstreet [Mon, 10 Feb 2025 22:46:36 +0000 (17:46 -0500)]
bcachefs: Fix want_new_bset() so we write until the end of the btree node
want_new_bset() returns the address of a new bset to initialize if we
wish to do so in a btree node - either because the previous one is too
big, or because it's been written.
The case for 'previous bset was written' was wrong: it's only supposed
to check for if we have space in the node for one more block, but
because it subtracted the header from the space available it would never
initialize a new bset if we were down to the last block in a node.
Fixing this results in fewer btree node splits/compactions, which fixes
a bug with flushing the journal to go read-only sometimes not
terminating or taking excessively long.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 10 Feb 2025 16:34:59 +0000 (11:34 -0500)]
bcachefs: Split out journal pins by btree level
This lets us flush the journal to go read-only more effectively.
Flushing the journal and going read-only requires halting mutually
recursive processes, which strictly speaking are not guaranteed to
terminate.
Flushing btree node journal pins will kick off a btree node write, and
btree node writes on completion must do another btree update to the
parent node to update the 'sectors_written' field for that node's key.
If the parent node is full and requires a split or compaction, that's
going to generate a whole bunch of additional btree updates - alloc
info, LRU btree, and more - which then have to be flushed, and the cycle
repeats.
This process will terminate much more effectively if we tweak journal
reclaim to flush btree updates leaf to root: i.e., don't flush updates
for a given btree node (kicking off a write, and consuming space within
that node up to the next block boundary) if there might still be
unflushed updates in child nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rob Herring (Arm) [Fri, 24 Jan 2025 19:16:44 +0000 (13:16 -0600)]
mfd: syscon: Restore device_node_to_regmap() for non-syscon nodes
Commit ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a
"syscon" compatible") broke drivers which call device_node_to_regmap()
on nodes without a "syscon" compatible. Restore the prior behavior for
device_node_to_regmap().
This also makes using device_node_to_regmap() incompatible with
of_syscon_register_regmap() again, so add kerneldoc for
device_node_to_regmap() and syscon_node_to_regmap() to make it clear
how and when each one should be used.
Fixes: ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a "syscon" compatible") Reported-by: Vaishnav Achath <vaishnav.a@ti.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Nishanth Menon <nm@ti.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Dhruva Gole <d-gole@ti.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250124191644.2309790-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
Linus Torvalds [Mon, 10 Feb 2025 21:11:24 +0000 (13:11 -0800)]
Merge tag 'nfsd-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for new bugs:
- A fix for CB_GETATTR reply decoding was not quite correct
- Fix the NFSD connection limiting logic
- Fix a bug in the new session table resizing logic
Bugs that pre-date v6.14:
- Support for courteous clients (5.19) introduced a shutdown hang
- Fix a crash in the filecache laundrette (6.9)
- Fix a zero-day crash in NFSD's NFSv3 ACL implementation"
* tag 'nfsd-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix CB_GETATTR status fix
NFSD: fix hang in nfsd4_shutdown_callback
nfsd: fix __fh_verify for localio
nfsd: fix uninitialised slot info when a request is retried
nfsd: validate the nfsd_serv pointer before calling svc_wake_up
nfsd: clear acl_access/acl_default after releasing them
Chuck Lever [Mon, 10 Feb 2025 16:43:31 +0000 (11:43 -0500)]
NFSD: Fix CB_GETATTR status fix
Jeff says:
Now that I look, 1b3e26a5ccbf is wrong. The patch on the ml was correct, but
the one that got committed is different. It should be:
status = decode_cb_op_status(xdr, OP_CB_GETATTR, &cb->cb_status);
if (unlikely(status || cb->cb_status))
If "status" is non-zero, decoding failed (usu. BADXDR), but we also want to
bail out and not decode the rest of the call if the decoded cb_status is
non-zero. That's not happening here, cb_seq_status has already been checked and
is non-zero, so this ends up trying to decode the rest of the CB_GETATTR reply
when it doesn't exist.
Reported-by: Jeff Layton <jlayton@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219737 Fixes: 1b3e26a5ccbf ("NFSD: fix decoding in nfs4_xdr_dec_cb_getattr") Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Dai Ngo [Thu, 30 Jan 2025 19:01:27 +0000 (11:01 -0800)]
NFSD: fix hang in nfsd4_shutdown_callback
If nfs4_client is in courtesy state then there is no point to send
the callback. This causes nfsd4_shutdown_callback to hang since
cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP
notifies NFSD that the connection was dropped.
This patch modifies nfsd4_run_cb_work to skip the RPC call if
nfs4_client is in courtesy state.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Fixes: 66af25799940 ("NFSD: add courteous server support for thread with only delegation") Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Olga Kornievskaia [Tue, 28 Jan 2025 16:58:06 +0000 (11:58 -0500)]
nfsd: fix __fh_verify for localio
__fh_verify() added a call to svc_xprt_set_valid() to help do connection
management but during LOCALIO path rqstp argument is NULL, leading to
NULL pointer dereferencing and a crash.
Fixes: eccbbc7c00a5 ("nfsd: don't use sv_nrthreads in connection limiting calculations.") Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NeilBrown [Mon, 27 Jan 2025 23:05:03 +0000 (10:05 +1100)]
nfsd: fix uninitialised slot info when a request is retried
A recent patch moved the assignment of seq->maxslots from before the
test for a resent request (which ends with a goto) to after, resulting
in it not being run in that case. This results in the server returning
bogus "high slot id" and "target high slot id" values.
The assignments to ->maxslots and ->target_maxslots need to be *after*
the out: label so that the correct values are returned in replies to
requests that are served from cache.
Fixes: 60aa6564317d ("nfsd: allocate new session-based DRC slots on demand.") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Linus Torvalds [Mon, 10 Feb 2025 17:50:01 +0000 (09:50 -0800)]
Merge tag 'hid-for-linus-2025021001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- build/dependency fixes for hid-lenovo and hid-intel-thc (Arnd
Bergmann)
- functional fixes for hid-corsair-void (Stuart Hayhurst)
- workqueue handling and ordering fix for hid-steam (Vicki Pfau)
- Gamepad mode vs. Lizard mode fix for hid-steam (Vicki Pfau)
- OOB read fix for hid-thrustmaster (Tulio Fernandes)
- fix for very long timeout on certain firmware in intel-ish-hid (Zhang
Lixu)
- other assorted small code fixes and device ID additions
* tag 'hid-for-linus-2025021001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hid-steam: Don't use cancel_delayed_work_sync in IRQ context
HID: hid-steam: Move hidraw input (un)registering to work
HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints()
HID: apple: fix up the F6 key on the Omoton KB066 keyboard
HID: hid-apple: Apple Magic Keyboard a3203 USB-C support
samples/hid: fix broken vmlinux path for VMLINUX_BTF
samples/hid: remove unnecessary -I flags from libbpf EXTRA_CFLAGS
HID: topre: Fix n-key rollover on Realforce R3S TKL boards
HID: intel-ish-hid: ipc: Add Panther Lake PCI device IDs
HID: multitouch: Add NULL check in mt_input_configured
HID: winwing: Add NULL check in winwing_init_led()
HID: hid-steam: Fix issues with disabling both gamepad mode and lizard mode
HID: ignore non-functional sensor in HP 5MP Camera
HID: intel-thc: fix CONFIG_HID dependency
HID: lenovo: select CONFIG_ACPI_PLATFORM_PROFILE
HID: intel-ish-hid: Send clock sync message immediately after reset
HID: intel-ish-hid: fix the length of MNG_SYNC_FW_CLOCK in doorbell
HID: corsair-void: Initialise memory for psy_cfg
HID: corsair-void: Add missing delayed work cancel for headset status
Linus Torvalds [Mon, 10 Feb 2025 17:40:45 +0000 (09:40 -0800)]
Merge tag 'pinctrl-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A series of IRQ and behaviour stabilization fixes for the CY8C95x0
pin control expander
- A print format fix for the generic debugfs output
* tag 'pinctrl-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pinconf-generic: Print unsigned value if a format is registered
pinctrl: cy8c95x0: Respect IRQ trigger settings from firmware
pinctrl: cy8c95x0: Rename PWMSEL to SELPWM
pinctrl: cy8c95x0: Enable regmap locking for debug
pinctrl: cy8c95x0: Avoid accessing reserved registers
pinctrl: cy8c95x0: Fix off-by-one in the regmap range settings
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.
Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.
Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.
Linus Torvalds [Sun, 9 Feb 2025 18:05:32 +0000 (10:05 -0800)]
Merge tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Linus Torvalds [Sun, 9 Feb 2025 17:47:06 +0000 (09:47 -0800)]
Merge tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
Linus Torvalds [Sun, 9 Feb 2025 17:41:38 +0000 (09:41 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/ Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Linus Torvalds [Sat, 8 Feb 2025 22:12:17 +0000 (14:12 -0800)]
Merge tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
Linus Torvalds [Sat, 8 Feb 2025 22:04:21 +0000 (14:04 -0800)]
Merge tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
Linus Torvalds [Sat, 8 Feb 2025 21:59:24 +0000 (13:59 -0800)]
Merge tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This is an alpha-specific fix, but since it touched ELF I was asked to
carry it.
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
support (Eric W. Biederman)"
* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Linus Torvalds [Sat, 8 Feb 2025 21:45:34 +0000 (13:45 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla1280: Fix kernel oops when debug level > 2
scsi: ufs: core: Fix error return with query response
scsi: storvsc: Set correct data length for sending SCSI command without payload
scsi: ufs: core: Fix use-after free in init error and remove paths
scsi: core: Do not retry I/Os during depopulation
scsi: core: Use GFP_NOIO to avoid circular locking dependency
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
scsi: ufs: core: Simplify temperature exception event handling
scsi: target: core: Add line break to status show
scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions
scsi: core: Add passthrough tests for success and no failure definitions
Linus Torvalds [Sat, 8 Feb 2025 20:22:21 +0000 (12:22 -0800)]
Merge tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Do not export KASAN ODR symbols to avoid gendwarfksyms warnings
- Fix future Rust 1.86.0 (to be released 2025-04-03) x86_64 builds
- Clean future Rust 1.86.0 (to be released 2025-04-03) warning
- Fix future GCC 15 (to be released in a few months) builds
- Fix `rusttest` target in macOS
* tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux:
x86: rust: set rustc-abi=x86-softfloat on rustc>=1.86.0
rust: kbuild: do not export generated KASAN ODR symbols
rust: kbuild: add -fzero-init-padding-bits to bindgen_skip_cflags
rust: init: use explicit ABI to clean warning in future compilers
rust: kbuild: use host dylib naming in rusttestlib-kernel
Linus Torvalds [Sat, 8 Feb 2025 20:18:02 +0000 (12:18 -0800)]
Merge tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
"Function graph fix of notrace functions.
When the function graph tracer was restructured to use the global
section of the meta data in the shadow stack, the bit logic was
changed. There's a TRACE_GRAPH_NOTRACE_BIT that is the bit number in
the mask that tells if the function graph tracer is currently in the
"notrace" mode. The TRACE_GRAPH_NOTRACE is the mask with that bit set.
But when the code we restructured, the TRACE_GRAPH_NOTRACE_BIT was
used when it should have been the TRACE_GRAPH_NOTRACE mask. This made
notrace not work properly"
* tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
Linus Torvalds [Sat, 8 Feb 2025 20:04:00 +0000 (12:04 -0800)]
Merge tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a build regression on GCC 15 builds, caused by GCC changing the
default C version that is overriden in the main Makefile but not in
the x86 boot code Makefile"
* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use '-std=gnu11' to fix build with GCC 15
Linus Torvalds [Sat, 8 Feb 2025 19:55:03 +0000 (11:55 -0800)]
Merge tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix a PREEMPT_RT bug in the clocksource verification code that caused
false positive warnings.
Also fix a timer migration setup bug when new CPUs are added"
* tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix off-by-one root mis-connection
clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
Linus Torvalds [Sat, 8 Feb 2025 19:16:22 +0000 (11:16 -0800)]
Merge tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a cfs_rq->h_nr_runnable accounting bug that trips up a defensive
SCHED_WARN_ON() on certain workloads. The bug is believed to be
(accidentally) self-correcting, hence no behavioral side effects are
expected.
Also print se.slice in debug output, since this value can now be set
via the syscall ABI and can be useful to track"
* tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Provide slice length for fair tasks
sched/fair: Fix inaccurate h_nr_runnable accounting with delayed dequeue
Linus Torvalds [Sat, 8 Feb 2025 19:05:54 +0000 (11:05 -0800)]
Merge tag 'irq-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Another followup fix for the procps genirq output formatting
regression caused by an optimization"
* tag 'irq-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
Linus Torvalds [Sat, 8 Feb 2025 18:54:11 +0000 (10:54 -0800)]
Merge tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a dangling pointer bug in the futex code used by the uring code.
It isn't causing problems at the moment due to uring ABI limitations
leaving it essentially unused in current usages, but is a good idea to
fix nevertheless"
* tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Pass in task to futex_queue()
Steven Rostedt [Sat, 8 Feb 2025 05:15:11 +0000 (00:15 -0500)]
fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
The code was restructured where the function graph notrace code, that
would not trace a function and all its children is done by setting a
NOTRACE flag when the function that is not to be traced is hit.
There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a
TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the
restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used
TRACE_GRAPH_NOTRACE.
Nathan Chancellor [Thu, 17 Oct 2024 17:09:22 +0000 (10:09 -0700)]
kbuild: Move -Wenum-enum-conversion to W=2
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
there were numerous instances that would break builds with -Werror.
Unfortunately, this is not a full solution, as more and more developers,
subsystems, and distributors are building with W=1 as well, so they
continue to see the numerous instances of this warning.
Since the move to W=1, there have not been many new instances that have
appeared through various build reports and the ones that have appeared
seem to be following similar existing patterns, suggesting that most
instances of this warning will not be real issues. The only alternatives
for silencing this warning are adding casts (which is generally seen as
an ugly practice) or refactoring the enums to macro defines or a unified
enum (which may be undesirable because of type safety in other parts of
the code).
Move the warning to W=2, where warnings that occur frequently but may be
relevant should reside.
Linus Torvalds [Sat, 8 Feb 2025 03:23:06 +0000 (19:23 -0800)]
Merge tag 'v6.14rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Three DFS fixes: DFS mount fix, fix for noisy log msg and one to
remove some unused code
- SMB3 Lease fix
* tag 'v6.14rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: change lease epoch type from unsigned int to __u16
smb: client: get rid of kstrdup() in get_ses_refpath()
smb: client: fix noisy when tree connecting to DFS interlink targets
smb: client: don't trust DFSREF_STORAGE_SERVER bit
Linus Torvalds [Fri, 7 Feb 2025 20:21:54 +0000 (12:21 -0800)]
Merge tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Just regular drm fixes, amdgpu, xe and i915 mostly, but a few
scattered fixes. I think one of the i915 fixes fixes some build combos
that Guenter was seeing.
amdgpu:
- Add new tiling flag for DCC write compress disable
- Add BO metadata flag for DCC
- Fix potential out of bounds access in display
- Seamless boot fix
- CONFIG_FRAME_WARN fix
- PSR1 fix
xe:
- OA uAPI related fixes
- Fix SRIOV migration initialization
- Restore devcoredump to a sane state
i915:
- Fix the build error with clamp after WARN_ON on gcc 13.x+
- HDCP related fixes
- PMU fix zero delta busyness issue
- Fix page cleanup on DMA remap failure
- Drop 64bpp YUV formats from ICL+ SDR planes
- GuC log related fix
- DisplayPort related fixes
ivpu:
- Fix error handling
komeda:
- add return check
zynqmp:
- fix locking in DP code
ast:
- fix AST DP timeout
cec:
- fix broken CEC adapter check"
* tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
drm/i915/dp: Fix potential infinite loop in 128b/132b SST
Revert "drm/amd/display: Use HW lock mgr for PSR1"
drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml files
accel/amdxdna: Add MODULE_FIRMWARE() declarations
drm/i915/dp: Iterate DSC BPP from high to low on all platforms
drm/xe: Fix and re-enable xe_print_blob_ascii85()
drm/xe/devcoredump: Move exec queue snapshot to Contexts section
drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked
drm/xe/pf: Fix migration initialization
drm/xe/oa: Preserve oa_ctrl unused bits
drm/amd/display: Fix seamless boot sequence
drm/amd/display: Fix out-of-bound accesses
drm/amdgpu: add a BO metadata flag to disable write compression for Vulkan
drm/i915/backlight: Return immediately when scale() finds invalid parameters
drm/i915/dp: Return min bpc supported by source instead of 0
drm/i915/dp: fix the Adaptive sync Operation mode for SDP
drm/i915/guc: Debug print LRC state entries only if the context is pinned
drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
drm/i915: Fix page cleanup on DMA remap failure
drm/i915/pmu: Fix zero delta busyness issue
...
Matthew Wilcox (Oracle) [Tue, 21 Jan 2025 05:40:51 +0000 (05:40 +0000)]
btrfs: fix two misuses of folio_shift()
It is meaningless to shift a byte count by folio_shift(). The folio index
is in units of PAGE_SIZE, not folio_size(). We can use folio_contains()
to make this work for arbitrary-order folios, so remove the assertion
that the folios are of order 0.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Fri, 7 Feb 2025 19:00:33 +0000 (11:00 -0800)]
Merge tag 'block-6.14-20250207' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- fix an error handling path for md-linear
- NVMe pull request via Keith:
- Connection fixes for fibre channel transport (Daniel)
- Endian fixes (Keith, Christoph)
- Cleanup fix for host memory buffer (Francis)
- Platform specific power quirks (Georg)
- Target memory leak (Sagi)
- Use appropriate controller state accessor (Daniel)
- Fixup for a regression introduced last week, where sunvdc wasn't
updated for an API change, causing compilation failures on sparc64.
* tag 'block-6.14-20250207' of git://git.kernel.dk/linux:
drivers/block/sunvdc.c: update the correct AIP call
md: Fix linear_set_limits()
nvme-fc: use ctrl state getter
nvme: make nvme_tls_attrs_group static
nvmet: add a missing endianess conversion in nvmet_execute_admin_connect
nvmet: the result field in nvmet_alloc_ctrl_args is little endian
nvmet: fix a memory leak in controller identify
nvme-fc: do not ignore connectivity loss during connecting
nvme: handle connectivity loss in nvme_set_queue_count
nvme-fc: go straight to connecting state when initializing
nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk
nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk
nvme-pci: remove redundant dma frees in hmb
nvmet: fix rw control endian access
WangYuli [Fri, 7 Feb 2025 07:08:55 +0000 (15:08 +0800)]
kbuild: install-extmod-build: add missing quotation marks for CC variable
While attempting to build a Debian packages with CC="ccache gcc", I
saw the following error as builddeb builds linux-headers-$KERNELVERSION:
make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts
make[6]: *** No rule to make target 'gcc'. Stop.
Upon investigation, it seems that one instance of $(CC) variable reference
in ./scripts/package/install-extmod-build was missing quotation marks,
causing the above error.
Add the missing quotation marks around $(CC) to fix build.
Linus Torvalds [Fri, 7 Feb 2025 18:34:50 +0000 (10:34 -0800)]
Merge tag 'pm-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a handful of issues in the amd-pstate driver, the airoha
cpufreq driver build, a (recently added) possible NULL pointer
dereference in the cpufreq code and a possible memory leak in the
power capping subsystem:
- Fix cpufreq_policy reference counting and prevent max_perf from
going above the current limit in amd-pstate, and drop a redundant
goto label from it (Dhananjay Ugwekar)
- Prevent the per-policy boost_enabled flag in amd-pstate from
getting out of sync with the actual state after boot failures
(Lifeng Zheng)
- Fix a recently added possible NULL pointer dereference in the
cpufreq core (Aboorva Devarajan)
- Fix a build issue related to CONFIG_OF and COMPILE_TEST
dependencies in the airoha cpufreq driver (Arnd Bergmann)
- Fix a possible memory leak in the power capping subsystem (Joe
Hattori)"
* tag 'pm-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq: prevent NULL dereference in cpufreq_online()
cpufreq: airoha: modify CONFIG_OF dependency
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
powercap: call put_device() on an error path in powercap_register_control_type()
Linus Torvalds [Fri, 7 Feb 2025 17:50:33 +0000 (09:50 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt support in gpio-pca953x
- fix configfs attribute locking in gpio-sim
- limit the visibility of the GPIO_GRGPIO Kconfig symbol to OF systems
only
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Use my kernel.org address for ACPI GPIO work
gpio: GPIO_GRGPIO should depend on OF
gpio: sim: lock hog configfs items if present
gpio: pca953x: Improve interrupt support
Linus Torvalds [Fri, 7 Feb 2025 17:22:31 +0000 (09:22 -0800)]
Merge tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
Linus Torvalds [Fri, 7 Feb 2025 17:16:07 +0000 (09:16 -0800)]
Merge tag 'bcachefs-2025-02-06.2' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Nothing major, things continue to be fairly quiet over here.
- add a SubmittingPatches to clarify that patches submitted for
bcachefs do, in fact, need to be tested
- discard path now correctly issues journal flushes when needed, this
fixes performance issues when the filesystem is nearly full and
we're bottlenecked on copygc
- fix a bug that could cause the pending rebalance work accounting to
be off when devices are being onlined/offlined; users should report
if they are still seeing this
- and a few more trivial ones"
* tag 'bcachefs-2025-02-06.2' of git://evilpiepirate.org/bcachefs:
bcachefs: bch2_bkey_sectors_need_rebalance() now only depends on bch_extent_rebalance
bcachefs: Fix rcu imbalance in bch2_fs_btree_key_cache_exit()
bcachefs: Fix discard path journal flushing
bcachefs: fix deadlock in journal_entry_open()
bcachefs: fix incorrect pointer check in __bch2_subvolume_delete()
bcachefs docs: SubmittingPatches.rst
Hector Martin [Thu, 6 Feb 2025 18:21:46 +0000 (03:21 +0900)]
MAINTAINERS: Remove myself
I no longer have any faith left in the kernel development process or
community management approach.
Apple/ARM platform development will continue downstream. If I feel like
sending some patches upstream in the future myself for whatever subtree
I may, or I may not. Anyone who feels like fighting the upstreaming
fight themselves is welcome to do so.
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vicki Pfau [Wed, 5 Feb 2025 03:55:29 +0000 (19:55 -0800)]
HID: hid-steam: Don't use cancel_delayed_work_sync in IRQ context
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options") Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Vicki Pfau [Wed, 5 Feb 2025 03:55:27 +0000 (19:55 -0800)]
HID: hid-steam: Move hidraw input (un)registering to work
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.") Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Tulio Fernandes [Wed, 5 Feb 2025 21:50:34 +0000 (18:50 -0300)]
HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints()
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
Alex Henrie [Fri, 17 Jan 2025 06:12:17 +0000 (23:12 -0700)]
HID: apple: fix up the F6 key on the Omoton KB066 keyboard
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Ievgen Vovk [Sun, 12 Jan 2025 04:13:14 +0000 (13:13 +0900)]
HID: hid-apple: Apple Magic Keyboard a3203 USB-C support
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Rafael J. Wysocki [Fri, 7 Feb 2025 12:06:31 +0000 (13:06 +0100)]
Merge branches 'acpi-property' and 'acpi-resource'
Merge a new ACPI IRQ override quirk for Eluktronics MECH-17 (Gannon
Kolding) and an acpi_data_prop_read() fix making it reflect the OF
counterpart behavior in error cases (Andy Shevchenko).
* acpi-property:
ACPI: property: Fix return value for nval == 0 in acpi_data_prop_read()
* acpi-resource:
ACPI: resource: IRQ override for Eluktronics MECH-17
Mateusz Guzik [Tue, 4 Feb 2025 21:32:07 +0000 (22:32 +0100)]
vfs: sanity check the length passed to inode_set_cached_link()
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Christian Brauner [Tue, 4 Feb 2025 13:51:20 +0000 (14:51 +0100)]
pidfs: improve ioctl handling
Pidfs supports extensible and non-extensible ioctls. The extensible
ioctls need to check for the ioctl number itself not just the ioctl
command otherwise both backward- and forward compatibility are broken.
The pidfs ioctl handler also needs to look at the type of the ioctl
command to guard against cases where "[...] a daemon receives some
random file descriptor from a (potentially less privileged) client and
expects the FD to be of some specific type, it might call ioctl() on
this FD with some type-specific command and expect the call to fail if
the FD is of the wrong type; but due to the missing type check, the
kernel instead performs some action that userspace didn't expect."
(cf. [1]]
Christian Brauner [Tue, 4 Feb 2025 10:25:45 +0000 (11:25 +0100)]
Merge patch series "Fix for huge faults regression"
Amir Goldstein <amir73il@gmail.com> says:
The two Fix patches have been tested by Alex together and each one
independently.
I also verified that they pass the LTP inoityf/fanotify tests.
* patches from https://lore.kernel.org/r/20250203223205.861346-1-amir73il@gmail.com:
fsnotify: disable pre-content and permission events by default
fsnotify: disable notification by default for all pseudo files
fsnotify: use accessor to set FMODE_NONOTIFY_*
Amir Goldstein [Mon, 3 Feb 2025 22:32:05 +0000 (23:32 +0100)]
fsnotify: disable pre-content and permission events by default
After introducing pre-content events, we had a regression related to
disabling huge faults on files that should never have pre-content events
enabled.
This happened because the default f_mode of allocated files (0) does
not disable pre-content events.
Pre-content events are disabled in file_set_fsnotify_mode_by_watchers()
but internal files may not get to call this helper.
Initialize f_mode to disable permission and pre-content events for all
files and if needed they will be enabled for the callers of
file_set_fsnotify_mode_by_watchers().
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches") Reported-by: Alex Williamson <alex.williamson@redhat.com> Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/ Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250203223205.861346-4-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
Miklos Szeredi [Wed, 29 Jan 2025 16:06:41 +0000 (17:06 +0100)]
selftests: always check mask returned by statmount(2)
STATMOUNT_MNT_OPTS can actually be missing if there are no options. This
is a change of behavior since 75ead69a7173 ("fs: don't let statmount return
empty strings").
The other checks shouldn't actually trigger, but add them for correctness
and for easier debugging if the test fails.
Amir Goldstein [Mon, 3 Feb 2025 22:32:04 +0000 (23:32 +0100)]
fsnotify: disable notification by default for all pseudo files
Most pseudo files are not applicable for fsnotify events at all,
let alone to the new pre-content events.
Disable notifications to all files allocated with alloc_file_pseudo()
and enable legacy inotify events for the specific cases of pipe and
socket, which have known users of inotify events.
Pre-content events are also kept disabled for sockets and pipes.
Amir Goldstein [Mon, 3 Feb 2025 22:32:03 +0000 (23:32 +0100)]
fsnotify: use accessor to set FMODE_NONOTIFY_*
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Christian Brauner [Thu, 30 Jan 2025 15:04:42 +0000 (16:04 +0100)]
Merge patch series "further lockref cleanups"
Andreas Gruenbacher <agruenba@redhat.com> says:
Here's an updated version with an additional comment saying that
lockref_init() initializes count to 1.
* patches from https://lore.kernel.org/r/20250130135624.1899988-1-agruenba@redhat.com:
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
Andreas Gruenbacher [Thu, 30 Jan 2025 13:56:22 +0000 (14:56 +0100)]
gfs2: switch to lockref_init(..., 1)
In qd_alloc(), initialize the lockref count to 1 to cover the common
case. Compensate for that in gfs2_quota_init() by adjusting the count
back down to 0; this only occurs when mounting the filesystem rw.
Miklos Szeredi [Thu, 30 Jan 2025 12:15:00 +0000 (13:15 +0100)]
statmount: let unset strings be empty
Just like it's normal for unset values to be zero, unset strings should be
empty instead of containing random values.
It seems to be a typical mistake that the mask returned by statmount is not
checked, which can result in various bugs.
With this fix, these bugs are prevented, since it is highly likely that
userspace would just want to turn the missing mask case into an empty
string anyway (most of the recently found cases are of this type).
Brahmajit Das [Tue, 21 Jan 2025 16:26:48 +0000 (21:56 +0530)]
vboxsf: fix building with GCC 15
Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.
Su Hui [Sun, 19 Jan 2025 02:59:47 +0000 (10:59 +0800)]
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
Clang static checker(scan-build) warning:
fs/stat.c:287:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
287 | stat->result_mask |= STATX_MNT_ID_UNIQUE;
| ~~~~~~~~~~~~~~~~~ ^
fs/stat.c:290:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
290 | stat->result_mask |= STATX_MNT_ID;
When vfs_getattr() failed because of security_inode_getattr(), 'stat' is
uninitialized. In this case, there is a harmless garbage problem in
vfs_statx_path(). It's better to return error directly when
vfs_getattr() failed, avoiding garbage value and more clearly.
Before attaching a new root to the old root, the children counter of the
new root is checked to verify that only the upcoming CPU's top group have
been connected to it. However since the recently added commit b729cc1ec21a
("timers/migration: Fix another race between hotplug and idle entry/exit")
this check is not valid anymore because the old root is pre-accounted
as a child to the new root. Therefore after connecting the upcoming
CPU's top group to the new root, the children count to be expected must
be 2 and not 1 anymore.
This omission results in the old root to not be connected to the new
root. Then eventually the system may run with more than one top level,
which defeats the purpose of a single idle migrator.
Also the old root is pre-accounted but not connected upon the new root
creation. But it can be connected to the new root later on. Therefore
the old root may be accounted twice to the new root. The propagation of
such overcommit can end up creating a double final top-level root with a
groupmask incorrectly initialized. Although harmless given that the final
top level roots will never have a parent to walk up to, this oddity
opportunistically reported the core issue:
Geert Uytterhoeven [Wed, 5 Feb 2025 14:22:56 +0000 (15:22 +0100)]
genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Dave Airlie [Fri, 7 Feb 2025 04:47:11 +0000 (14:47 +1000)]
Merge tag 'drm-misc-fixes-2025-02-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Kent Overstreet [Sun, 26 Jan 2025 02:29:45 +0000 (21:29 -0500)]
bcachefs: bch2_bkey_sectors_need_rebalance() now only depends on bch_extent_rebalance
Previously, bch2_bkey_sectors_need_rebalance() called
bch2_target_accepts_data(), checking whether the target is writable.
However, this means that adding or removing devices from a target would
change the value of bch2_bkey_sectors_need_rebalance() for an existing
extent; this needs to be invariant so that the extent trigger can
correctly maintain rebalance_work accounting.
Instead, check target_accepts_data() in io_opts_to_rebalance_opts(),
before creating the bch_extent_rebalance entry.
This fixes (one?) cause of rebalance_work accounting being off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
projects / users / willy / pagecache.git / log