[WHY]
The optimized_require flag is needed to set watermarks and clocks lower
in certain conditions. This flag is set to true and then set to false
while programming front end in dcn20.
[HOW]
Do not set the flag to false while disabling plane.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tremont is Intel's successor to Goldmont Plus. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Goldmont Plus and Goldmont.
Share glm_cstates with Goldmont Plus and Goldmont.
Update the comments for Tremont.
Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU,
there is nothing changed compared with Jacobsville.
Share the perf code with Jacobsville.
Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:
root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found
Use platform_get_irq_optional() to silence the warning.
If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.
Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We want to make sure that we revalidate the dentry if and only if
we've done an OPEN by filename.
In order to avoid races with remote changes to the directory on the
server, we want to save the verifier before calling OPEN. The exception
is if the server returned a delegation with our OPEN, as we then
know that the filename can't have changed on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@gmail.com> Tested-by: Benjamin Coddington <bcodding@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.
The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work. This is done based on the knowledge that it
has exactly 2 bulk endpoints. QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.
The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs. Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.
Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit f25e1392fdb5 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples. It is therefore
necessary to support both variants.
Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either. Interface 1 will be rejected based on the HID class for the
production variant:
Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware") Link: https://whrl.pl/Rf0vNk Reported-by: Lars Melin <larsm17@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The internal statistic counters for the total number of
requests processed per card and per queue used integers. So they do
wrap after a rather huge amount of crypto requests processed. This
patch introduces uint64 counters which should hold much longer but
still may wrap. The sysfs attributes request_count for card and queue
also used only %ld and now display the counter value with %llu.
This is not a security relevant fix. The int overflow which happened
is not in any way exploitable as a security breach.
When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.
We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
- WLAN_EID_VHT_OPERATION
- WLAN_EID_OPMODE_NOTIF
I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fstests generic/471 reports a failure when run with MOUNT_OPTIONS="-o
dax". The reason is that the initial pwrite to an empty file with the
RWF_NOWAIT flag set does not return -EAGAIN. It turns out that
dax_iomap_rw doesn't pass that flag through to iomap_apply.
With this patch applied, generic/471 passes for me.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/x49r1z86e1d.fsf@segfault.boston.devel.redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a running task is moved on a throttled task group and there is no
other task enqueued on the CPU, the task can keep running using 100% CPU
whatever the allocated bandwidth for the group and although its cfs rq is
throttled. Furthermore, the group entity of the cfs_rq and its parents are
not enqueued but only set as curr on their respective cfs_rqs.
We have the following sequence:
sched_move_task
-dequeue_task: dequeue task and group_entities.
-put_prev_task: put task and group entities.
-sched_change_group: move task to new group.
-enqueue_task: enqueue only task but not group entities because cfs_rq is
throttled.
-set_next_task : set task and group_entities as current sched_entity of
their cfs_rq.
Another impact is that the root cfs_rq runnable_load_avg at root rq stays
null because the group_entities are not enqueued. This situation will stay
the same until an "external" event triggers a reschedule. Let trigger it
immediately instead.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ben Segall <bsegall@google.com> Link: https://lkml.kernel.org/r/1579011236-31256-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The way loadavg is tracked during nohz only pays attention to the load
upon entering nohz. This can be particularly noticeable if full nohz is
entered while non-idle, and then the cpu goes idle and stays that way for
a long time.
Use the remote tick to ensure that full nohz cpus report their deltas
within a reasonable time.
[ swood: Added changelog and removed recheck of stopped tick. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/1578736419-14628-3-git-send-email-swood@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
This will be used in the next patch to get a loadavg update from
nohz cpus. The delta check is skipped because idle_sched_class
doesn't update se.exec_start.
The root of the problem is that the default segment size for sgt is
(UINT_MAX & PAGE_MASK), and the default segment size for device dma is
64K. As such, if you compare the 2, you would deduce that the sg segment
will overflow the device's capacity. In reality, the hardware can
accommodate the larger sg segments, it's just not initializing its max
segment properly. This patch initializes the max segment size for the
mdss device, which gets rid of that pesky warning.
Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
In error cases a NULL can be passed to memcpy. The length will always
be zero, so it doesn't really matter, but go ahead and check for NULL,
anyway, to be more precise and avoid static analysis errors.
at91ether_init was handling the phy mode and speed but since the switch to
phylink, the NCFGR register got overwritten by macb_mac_config(). The issue
is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared
but never restored as they conflict with the PAE, GBE and PCSSEL bits.
Add new capability to differentiate between EMAC and the other versions of
the IP and use it to set and avoid clearing the relevant bits.
Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC
doesn't use any rings/bufffers/queues.
Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netdev_name_node_alt_destroy() does a lookup over all
device names of a namespace.
We need to make sure the name belongs to the device
of interest, and that we do not destroy its primary
name, since we rely on it being not deleted :
dev->name_node would indeed point to freed memory.
syzbot report was the following :
BUG: KASAN: use-after-free in dev_net include/linux/netdevice.h:2206 [inline]
BUG: KASAN: use-after-free in mld_force_mld_version net/ipv6/mcast.c:1172 [inline]
BUG: KASAN: use-after-free in mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline]
BUG: KASAN: use-after-free in mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190
Read of size 8 at addr ffff88809886c588 by task swapper/1/0
The fw_status field is only 8 bits, so fix the read. Also,
we only want to look at the one status bit, to allow for future
use of the other bits, and watch for a bad PCI read.
Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When splitting an RTA_MULTIPATH request into multiple routes and adding the
second and later components, we must not simply remove NLM_F_REPLACE but
instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink
message was malformed.
For example,
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \
nexthop via fe80::30:2 dev dummy0
results in the following warnings:
[ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route
This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to
what it would get if the multipath route had been added in multiple netlink
operations:
ip route add 2001:db8::1/128 dev dummy0
ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0
ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0
Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the "struct bonding", there is stats_lock.
This lock protects "bond_stats" in the "struct bonding".
bond_stats is updated in the bond_get_stats() and this function would be
executed concurrently. So, the lock is needed.
Bonding interfaces would be nested.
So, either stats_lock should use dynamic lockdep class key or stats_lock
should be used by spin_lock_nested(). In the current code, stats_lock is
using a dynamic lockdep class key.
But there is no updating stats_lock_key routine So, lockdep warning
will occur.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond0 master bond1
ip link set bond0 nomaster
ip link set bond1 master bond0
But, there is another problem.
The dynamic lockdep class key is protected by RTNL, but bond_get_stats()
would be called outside of RTNL.
So, it would use an invalid dynamic lockdep class key.
In order to fix this issue, stats_lock uses spin_lock_nested() instead of
a dynamic lockdep key.
The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct
nest level value, which will be used by spin_lock_nested().
The "dev->lower_level" indicates lower nest level value, but this value
is invalid outside of RTNL.
So, bond_get_lowest_level_rcu() returns valid lower nest level value in
the RCU critical section.
bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled.
Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.
In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.
Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ifenslave bond0 bond1
ifenslave -d bond0 bond1
ifenslave bond1 bond0
If crashed kernel does not shutdown the NIC properly, PCIe FLR
is required in the kdump kernel in order to initialize all the
functions properly.
Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Especially when bnxt_shutdown() is called during kexec, we need to
disable MSIX and disable Bus Master to completely quiesce the device.
Make these 2 calls unconditionally in the shutdown method.
Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.
However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.
This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.
Thanks Hangbin for reporting this issue by the fuzz testing.
v1->v2:
- improve the comment in the code as Marcelo's suggestion.
Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As of the below commit, udp sockets bound to a specific address can
coexist with one bound to the any addr for the same port.
The commit also phased out the use of socket hashing based only on
port (hslot), in favor of always hashing on {addr, port} (hslot2).
The change broke the following behavior with disconnect (AF_UNSPEC):
server binds to 0.0.0.0:1337
server connects to 127.0.0.1:80
server disconnects
client connects to 127.0.0.1:1337
client sends "hello"
server reads "hello" // times out, packet did not find sk
On connect the server acquires a specific source addr suitable for
routing to its destination. On disconnect it reverts to the any addr.
The connect call triggers a rehash to a different hslot2. On
disconnect, add the same to return to the original hslot2.
Skip this step if the socket is going to be unhashed completely.
Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address") Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.
This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.
A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.
Fixes: cee9fbd8e2e ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:
pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
pn544_hci_i2c 1-002a: NFC: invalid len byte
shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead
This patch fixes the occasional NFC initialization failure on Nexus 7
device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code doesn't check if tcp sequence number is starting from (/after)
1st record's start sequnce number. It only checks if seq number is before
1st record's end sequnce number. This problem will always be a possibility
in re-transmit case. If a record which belongs to a requested seq number is
already deleted, tls_get_record will start looking into list and as per the
check it will look if seq number is before the end seq of 1st record, which
will always be true and will return 1st record always, it should in fact
return NULL.
As part of the fix, start looking each record only if the sequence number
lies in the list else return NULL.
There is one more check added, driver look for the start marker record to
handle tcp packets which are before the tls offload start sequence number,
hence return 1st record if the record is tls start marker and seq number is
before the 1st record's starting sequence number.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.
Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.
Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.
Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.
In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.
The fix consist in resetting the error after reading the IFH.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of autosuspend, at91ether_start is called with clocks disabled.
Ensure that pm_runtime doesn't suspend the interface as soon as it is
opened as there is no pm_runtime support is the other relevant parts of the
platform support for at91rm9200.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.
Signed-off-by: Jethro Beekman <jethro@fortanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to ensure that the default VID is untagged otherwise the switch
will be sending tagged frames and the results can be problematic. This
is especially true with b53 switches that use VID 0 as their default
VLAN since VID 0 has a special meaning.
Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID") Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both skx_edac and i10nm_edac drivers are loaded based on the matching CPU being
available which leads the module to be automatically loaded in virtual machines
as well. That will fail due the missing PCI devices. In both drivers the first
function to make use of the PCI devices is skx_get_hi_lo() will simply print
EDAC skx: Can't get tolm/tohm
for each CPU core, which is noisy. This patch makes it a debug message.
Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
repair = TCP_REPAIR_ON;
^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
repair = TCP_REPAIR_OFF_NO_WP;
Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In file included from ../arch/s390/purgatory/purgatory.c:10:
In file included from ../include/linux/kexec.h:18:
In file included from ../include/linux/crash_core.h:6:
In file included from ../include/linux/elfcore.h:5:
In file included from ../include/linux/user.h:1:
In file included from ../arch/s390/include/asm/user.h:11:
../arch/s390/include/asm/page.h:45:6: warning: converting the result of
'<<' to a boolean always evaluates to false
[-Wtautological-constant-compare]
if (PAGE_DEFAULT_KEY)
^
../arch/s390/include/asm/page.h:23:44: note: expanded from macro
'PAGE_DEFAULT_KEY'
#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4)
^
1 warning generated.
Explicitly compare this against zero to silence the warning as it is
intended to be used in a boolean context.
When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.
In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.
Following call trace is observed on rx error health reporting.
There is no need to reset all vf config (except link state) between
legacy and switchdev modes changes.
Also, set link state to AUTO, when legacy enabled.
Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.
Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.
Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.
Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen_maybe_preempt_hcall() is called from the exception entry point
xen_do_hypervisor_callback with interrupts disabled.
_cond_resched() evades the might_sleep() check in cond_resched() which
would have caught that and schedule_debug() unfortunately lacks a check
for irqs_disabled().
Enable interrupts around the call and use cond_resched() to catch future
issues.
Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_shutdown() called from reboot or power_shutdown expect
all devices to be shutdown. Same is true for even ahci pci driver.
As no ahci shutdown function is implemented, the ata subsystem
always remains alive with DMA & interrupt support. File system
related calls should not be honored after device_shutdown().
So defining ahci pci driver shutdown to freeze hardware (mask
interrupt, stop DMA engine and free DMA resources).
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.
To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.
Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.
Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.
Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.
Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The user-specified hashtable size is unbound, this could
easily lead to an OOM or a hung task as we hold the global
mutex while allocating and initializing the new hashtable.
Add a max value to cap both cfg->size and cfg->max, as
suggested by Florian.
Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_seq_check_queue() passes the current tick and time of the given
queue as a pointer to snd_seq_prioq_cell_out(), but those might be
updated concurrently by the seq timer update.
Fix it by retrieving the current tick and time via the proper helper
functions at first, and pass those values to snd_seq_prioq_cell_out()
later in the loops.
snd_seq_timer_get_cur_time() takes a new argument and adjusts with the
current system time only when it's requested so; this update isn't
needed for snd_seq_check_queue(), as it's called either from the
interrupt handler or right after queuing.
Also, snd_seq_timer_get_cur_tick() is changed to read the value in the
spinlock for the concurrency, too.
The queue flags are represented in bit fields and the concurrent
access may result in unexpected results. Although the current code
should be mostly OK as it's only reading a field while writing other
fields as KCSAN reported, it's safer to cover both with a proper
spinlock protection.
This patch fixes the possible concurrent read by protecting with
q->owner_lock. Also the queue owner field is protected as well since
it's the field to be protected by the lock itself.
The rawmidi state flags (opened, append, active_sensing) are stored in
bit fields that can be potentially racy when concurrently accessed
without any locks. Although the current code should be fine, there is
also no any real benefit by keeping the bitfields for this kind of
short number of members.
This patch changes those bit fields flags to the simple bool fields.
There should be no size increase of the snd_rawmidi_substream by this
change.
dma_direct_supported tries to find the minimum addressable bitmask
based on the end pfn and optional magic that architectures can use
to communicate the size of the magic ZONE_DMA that can be used
for bounce buffering. But between the DMA offsets that can change
per device (or sometimes even region), the fact the ZONE_DMA isn't
even guaranteed to be the lowest addresses and failure of having
proper interfaces to the MM code this fails at least for one
arm subarchitecture.
As all the legacy DMA implementations have supported 32-bit DMA
masks, and 32-bit masks are guranteed to always work by the API
contract (using bounce buffers if needed), we can short cut the
complicated check and always return true without breaking existing
assumptions. Hopefully we can properly clean up the interaction
with the arch defined zones and the bootmem allocator eventually.
Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit a3a0e43fd770 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.
I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().
Fixes: a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending") Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers. Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place. Oops.
The problem was introduced recently when trying to add signatures from
Fixes. The problem was that these email addresses were added too early
in the process of compiling our list of places to send. Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.
Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:
Commit e0d5896bd356 ("arm64: lse: fix LSE atomics with LLVM's integrated
assembler") broke the build when clang is used in connjunction with the
binutils assembler ("-no-integrated-as"). This happens because
__LSE_PREAMBLE is defined as ".arch armv8-a+lse", which overrides the
version of the CPU architecture passed via the "-march" paramter to gas:
$ aarch64-none-linux-gnu-as -EL -I ./arch/arm64/include
-I ./arch/arm64/include/generated
-I ./include -I ./include
-I ./arch/arm64/include/uapi
-I ./arch/arm64/include/generated/uapi
-I ./include/uapi -I ./include/generated/uapi
-I ./init -I ./init
-march=armv8.3-a -o init/do_mounts.o
/tmp/do_mounts-d7992a.s
/tmp/do_mounts-d7992a.s: Assembler messages:
/tmp/do_mounts-d7992a.s:1959: Error: selected processor does not support `autiasp'
/tmp/do_mounts-d7992a.s:2021: Error: selected processor does not support `paciasp'
/tmp/do_mounts-d7992a.s:2157: Error: selected processor does not support `autiasp'
/tmp/do_mounts-d7992a.s:2175: Error: selected processor does not support `paciasp'
/tmp/do_mounts-d7992a.s:2494: Error: selected processor does not support `autiasp'
Fix the issue by replacing ".arch armv8-a+lse" with ".arch_extension lse".
Sami confirms that the clang integrated assembler does now support the
'.arch_extension' directive, so this change will be fine even for LTO
builds in future.
Fixes: e0d5896bd356cd ("arm64: lse: fix LSE atomics with LLVM's integrated assembler") Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reported-by: Amit Kachhap <Amit.Kachhap@arm.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This if guards whether user-space wants a copy of the offload-jited
bytecode and whether this bytecode exists. By erroneously doing a bitwise
AND instead of a logical AND on user- and kernel-space buffer-size can lead
to no data being copied to user-space especially when user-space size is a
power of two and bigger then the kernel-space buffer.
Fixes: fcfb126defda ("bpf: add new jited info fields in bpf_dev_offload and bpf_prog_info") Signed-off-by: Johannes Krude <johannes@krude.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20200212193227.GA3769@phlox.h.transitiv.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code,
which catches cases where the affinity setting is not done on the CPU which
is the current target of the interrupt, triggers during CPU hotplug stress
testing.
It turns out that the warning which was added with the commit addressing
the MSI affinity race unearthed yet another long standing bug.
If user space writes a bogus affinity mask, i.e. it contains no online CPUs,
then it calls irq_select_affinity_usr(). This was introduced for ALPHA in
eee45269b0f5 ("[PATCH] Alpha: convert to generic irq framework (generic part)")
and subsequently made available for all architectures in
which introduced the circumvention of the affinity setting restrictions for
interrupt which cannot be moved in process context.
The whole exercise is bogus in various aspects:
1) If the interrupt is already started up then there is absolutely
no point to honour a bogus interrupt affinity setting from user
space. The interrupt is already assigned to an online CPU and it
does not make any sense to reassign it to some other randomly
chosen online CPU.
2) If the interupt is not yet started up then there is no point
either. A subsequent startup of the interrupt will invoke
irq_setup_affinity() anyway which will chose a valid target CPU.
So the only correct solution is to just return -EINVAL in case user space
wrote an affinity mask which does not contain any online CPUs, except for
ALPHA which has it's own magic sauce for this.
Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Qian Cai <cai@lca.pw> Link: https://lkml.kernel.org/r/878sl8xdbm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The name sm3-256 is defined in hash_algo_name in hash_info, but the
algorithm name implemented in sm3_generic.c is sm3, which will cause
the sm3-256 algorithm to be not found in some application scenarios of
the hash algorithm, and an ENOENT error will occur. For example,
IMA, keys, and other subsystems that reference hash_algo_name all use
the hash algorithm of sm3.
The intel_svm_is_pasid_valid() needs to be marked inline, otherwise it
causes the compile warning below:
CC [M] drivers/dma/idxd/cdev.o
In file included from drivers/dma/idxd/cdev.c:9:0:
./include/linux/intel-svm.h:125:12: warning: ‘intel_svm_is_pasid_valid’ defined but not used [-Wunused-function]
static int intel_svm_is_pasid_valid(struct device *dev, int pasid)
^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Borislav Petkov <bp@alien8.de> Fixes: 15060aba71711 ('iommu/vt-d: Helper function to query if a pasid has any active users') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In crypt_scatterlist, if the crypt_stat argument is not set up
correctly, the kernel crashes. Instead, by returning an error code
upstream, the error is handled safely.
The issue is detected via a static analysis tool written by us.
The ssc audio driver can call into both pdc and dma backends. With the
latest rework, the logic to do this in a safe way avoiding link errors
was removed, bringing back link errors that were fixed long ago in commit 061981ff8cc8 ("ASoC: atmel: properly select dma driver state") such as
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
atmel_ssc_dai.c:(.text+0xac): undefined reference to `atmel_pcm_pdc_platform_register'
Fix it this time using Makefile hacks and a comment to prevent this
from accidentally getting removed again rather than Kconfig hacks.
Fixes: 18291410557f ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20200130130545.31148-1-codrin.ciubotariu@microchip.com Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we call kobject_put() and it's the last reference to the kobject
then it calls gb_audio_module_release() and frees module. We dereference
"module" on the next line which is a use after free.
Currently the rtw_sprintf prints the contents of thread_name
onto thread_name and this can lead to a potential copy of a
string over itself. Avoid this by printing the literal string RTWHALXT
instread of the contents of thread_name.
Addresses-Coverity: ("copy of overlapping memory") Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200126220549.9849-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SuperSpeedPlus peripherals must report their bMaxPower of the
configuration descriptor in units of 8mA as per the USB 3.2
specification. The current switch statement in encode_bMaxPower()
only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so
the latter falls back to USB 2.0 encoding which uses 2mA units.
Replace the switch with a simple if/else.
The component order between the two was swapped, resulting in incorrect
color when games with 565 visual hit the overlay path instead of GPU
composition.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.
To enable non-persistent contexts, we require a means of cancelling any
inflight work from that context. This is first done "gracefully" by
using preemption to kick the active context off the engine, and then
forcefully by resetting the engine if it is active. If we are unable to
reset the engine to remove hostile userspace, we should not allow
userspace to opt into using non-persistent contexts.
If the per-engine reset fails, we still do a full GPU reset, but that is
rare and usually indicative of much deeper issues. The damage is already
done. However, the goal of the interface to allow long running compute
jobs without causing collateral damage elsewhere, and if we are unable
to support that we should make that known by not providing the
interface (and falsely pretending we can).
Fixes: a0e047156cde ("drm/i915/gem: Make context persistence optional") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130164553.1937718-1-chris@chris-wilson.co.uk
(cherry picked from commit d1b9b5f127bc3797fc274cfa4f363e039f045c3a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link training timeout waiting for LT_LOOPDONE!
main link enable error: -110
This is caused by too tight timeouts, which were changed recently in aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()").
With a quick glance, the commit does not change the timeouts. However,
the method of delaying/sleeping is different, and as the timeout in the
previous implementation was not explicit, the new version in practice
has much tighter timeout.
The same change was made to other parts in the driver, but the link
training timeout is the only one I have seen causing issues.
Nevertheless, 1 us sleep is not very sane, and the timeouts look pretty
tight, so lets fix all the timeouts.
One exception was the aux busy poll, where the poll sleep was much
longer than necessary (or optimal).
I measured the times on my setup, and now the sleep times are set to
such values that they result in multiple loops, but not too many (say,
5-10 loops). The timeouts were all increased to 100ms, which should be
more than enough for all of these, but in case of bad errors, shouldn't
stop the driver as multi-second timeouts could do.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()") Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209082707.24531-1-tomi.valkeinen@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") moved
the call to ice_construct_skb() under a null check as Coverity reported a
possible use of null skb. However, the original call was not deleted, do so
now.
Fixes: 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While logging the prealloc extents of an inode during a fast fsync we call
btrfs_truncate_inode_items(), through btrfs_log_prealloc_extents(), while
holding a read lock on a leaf of the inode's root (not the log root, the
fs/subvol root), and then that function locks the file range in the inode's
iotree. This can lead to a deadlock when:
* the fsync is ranged
* the file has prealloc extents beyond eof
* writeback for a range different from the fsync range starts
during the fsync
* the size of the file is not sector size aligned
Because when finishing an ordered extent we lock first a file range and
then try to COW the fs/subvol tree to insert an extent item.
The following diagram shows how the deadlock can happen.
CPU 1 CPU 2
btrfs_sync_file()
--> for range [0, 1MiB)
--> inode has a size of
1MiB and has 1 prealloc
extent beyond the
i_size, starting at offset
4MiB
flushes all delalloc for the
range [0MiB, 1MiB) and waits
for the respective ordered
extents to complete
--> before task at CPU 1 locks the
inode, a write into file range
[1MiB, 2MiB + 1KiB) is made
--> i_size is updated to 2MiB + 1KiB
--> writeback is started for that
range, [1MiB, 2MiB + 4KiB)
--> end offset rounded up to
be sector size aligned
btrfs_log_changed_extents()
btrfs_log_prealloc_extents()
--> does a search on the
inode's root
--> holds a read lock on
leaf X
btrfs_finish_ordered_io()
--> locks range [1MiB, 2MiB + 4KiB)
--> end offset rounded up
to be sector size aligned
--> tries to cow leaf X, through
insert_reserved_file_extent()
--> already locked by the
task at CPU 1
btrfs_truncate_inode_items()
--> gets an i_size of
2MiB + 1KiB, which is
not sector size
aligned
--> tries to lock file
range [2MiB, (u64)-1)
--> the start range
is rounded down
from 2MiB + 1K
to 2MiB to be sector
size aligned
--> but the subrange
[2MiB, 2MiB + 4KiB) is
already locked by
task at CPU 2 which
is waiting to get a
write lock on leaf X
for which we are
holding a read lock
*** deadlock ***
This results in a stack trace like the following, triggered by test case
generic/561 from fstests:
So fix this by making btrfs_truncate_inode_items() not lock the range in
the inode's iotree when the target root is a log root, since it's not
needed to lock the range for log roots as the protection from the inode's
lock and log_mutex are all that's needed.
Fixes: 28553fa992cb28 ("Btrfs: fix race between shrinking truncate and fiemap") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In btrfs_wait_ordered_range() once we find an ordered extent that has
finished with an error we exit the loop and don't wait for any other
ordered extents that might be still in progress.
All the users of btrfs_wait_ordered_range() expect that there are no more
ordered extents in progress after that function returns. So past fixes
such like the ones from the two following commits:
ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before
writeback happens")
28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after
IO error")
don't work when there are multiple ordered extents in the range.
Fix that by making btrfs_wait_ordered_range() wait for all ordered extents
even after it finds one that had an error.
Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
btrfs_assert_delayed_root_empty() will check if the delayed root is
completely empty, but this is a filesystem-wide check. On cleanup we
may have allowed other transactions to begin, for whatever reason, and
thus the delayed root is not empty.
So remove this check from cleanup_one_transation(). This however can
stay in btrfs_cleanup_transaction(), because it checks only after all of
the transactions have been properly cleaned up, and thus is valid.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While running my error injection script I hit a panic when we tried to
clean up the fs_root when freeing the fs_root. This is because
fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by
setting fs_info->fs_root = NULL; if we fail to read the root.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens if we fail to insert our reserved file extent. At this
point we've already converted our reservation from ->bytes_may_use to
->bytes_reserved. However once we break we will attempt to free
everything from [cur_offset, end] from ->bytes_may_use, but our extent
reservation will overlap part of this.
Fix this problem by adding ins.offset (our extent allocation size) to
cur_offset so we remove the actual remaining part from ->bytes_may_use.
I validated this fix using my inject-error.py script
This code assigns src_len (size_t) to sl (int), which causes problems
when src_len is very large. Probably nobody in the kernel should be
passing this much data to chacha20poly1305 all in one go anyway, so I
don't think we need to change the algorithm or introduce larger types
or anything. But we should at least error out early in this case and
print a warning so that we get reports if this does happen and can look
into why anybody is possibly passing it that much data or if they're
accidently passing -1 or similar.
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return
value of pv_eoi_get_pending() becomes random. Fix the issue by initializing
the variable.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*),
nothing happens to VMX MSRs on the already existing vCPUs, however, all new
ones are created with PIN_BASED_POSTED_INTR filtered out. This is very
confusing and results in the following picture inside the guest:
This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does
KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three.
L1 hypervisor may only check CPU0's controls to find out what features
are available and it will be very confused later. Switch to setting
PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting.
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we rewind the RING_TAIL on a context, due to a preemption event, we
must force the context restore for the RING_TAIL update to be properly
handled. Rather than note which preemption events may cause us to rewind
the tail, compare the new request's tail with the previously submitted
RING_TAIL, as it turns out that timeslicing was causing unexpected
rewinds.
<idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3
<idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964
<idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695
<idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
^---- Note we unwind 2 requests from the same context
<idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
<idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506
^---- But to apply the new timeslice, we have to replay the first request
before the new client can start -- the unexpected RING_TAIL rewind
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk
(cherry picked from commit 5ba32c7be81e53ea8a27190b0f6be98e6c6779af) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / dwmw2 / linux.git / log