This is a regressoin introduced in b07db3958485 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.
Fix this with an early return statement.
Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:
if (!search_fb_in_map(info_idx))
info_idx = newidx;
These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.
Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.
v2: Clarify commit message (Javier)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Tested-by: Xingyuan Mo <hdthky0@gmail.com> Fixes: b07db3958485 ("fbcon: Ditch error handling for con2fb_release_oldinfo") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, with VHE, KVM enables the EL0 event counting for the
guest on vcpu_load() or KVM enables it as a part of the PMU
register emulation process, when needed. However, in the migration
case (with VHE), the same handling is lacking, as vPMU register
values that were restored by userspace haven't been propagated yet
(the PMU events haven't been created) at the vcpu load-time on the
first KVM_RUN (kvm_vcpu_pmu_restore_guest() called from vcpu_load()
on the first KVM_RUN won't do anything as events_{guest,host} of
kvm_pmu_events are still zero).
So, with VHE, enable the guest's EL0 event counting on the first
KVM_RUN (after the migration) when needed. More specifically,
have kvm_pmu_handle_pmcr() call kvm_vcpu_pmu_restore_guest()
so that kvm_pmu_handle_pmcr() on the first KVM_RUN can take
care of it.
Fixes: d0c94c49792c ("KVM: arm64: Restore PMU configuration on first run") Cc: stable@vger.kernel.org Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Reiji Watanabe <reijiw@google.com> Link: https://lore.kernel.org/r/20230329023944.2488484-1-reijiw@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an oversight from dc5bdb68b5b3 ("drm/fb-helper: Fix vt
restore") - I failed to realize that nasty userspace could set this.
It's not pretty to mix up kernel-internal and userspace uapi flags
like this, but since the entire fb_var_screeninfo structure is uapi
we'd need to either add a new parameter to the ->fb_set_par callback
and fb_set_par() function, which has a _lot_ of users. Or some other
fairly ugly side-channel int fb_info. Neither is a pretty prospect.
Instead just correct the issue at hand by filtering out this
kernel-internal flag in the ioctl handling code.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: dc5bdb68b5b3 ("drm/fb-helper: Fix vt restore") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: shlomo@fastmail.com Cc: Michel Dänzer <michel@daenzer.net> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: linux-fbdev@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Shigeru Yoshida <syoshida@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404193934.472457-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic
crc32c is detected, which is the incorrect check if the file system uses
a different checksumming algorithm. Refactor the code to only check
this if crc32c is actually used. Note that in an ideal world the
information if an algorithm is hardware accelerated or not should be
provided by the crypto API instead, but that's left for another day.
CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a9c: btrfs: print checksum type and implementation at mount time CC: stable@vger.kernel.org # 5.4.x Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq") converted the read
and I/O handling from btrfs_workqueues to Linux workqueues, and as part
of that lost the code to apply the thread_pool= based max_active limit
on remount. Restore it.
Fixes: d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq") CC: stable@vger.kernel.org # 6.0+ Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31
When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.
This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.
Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an incorrect loop exit condition in code that replaces
'/' symbols in the board name. There might also be a memory corruption
issue here, but it is unlikely to be a real problem.
Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
Cc: stable@kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of keep-alive (KAE) has resulted in loss of audio on some A750/770
cards as the transition from keep-alive to stream playback is not
working as expected. As there is limited benefit of the new KAE mode
on discrete cards, revert back to older silent-stream implementation
on these systems.
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.
The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.
Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".
The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.
The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.
Add pins and verbs needed to enable speakers and jack.
The pins and verbs configurations were identified by snooping the
Windows driver commands, with a nice write-up here:
https://brakkee.org/site/2023/02/07/fixing-sound-on-the-asus-n7601zm/
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry-picked from b8ca445f550a9a079134f836466ddda3bfad6108)
[Hand modified due to missing f0127cb11299df80df45583b216e13f27c408545 which
failed to apply due to missing 94dfeaa46925bb6b4d43645bbb6234e846dec257] Reported-and-tested-by: Veronika Schwan <veronika@pisquaredover6.de> Fixes: d7b5638bd337 ("drm/amd/display: Take FEC Overhead into Timeslot Calculation") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button
btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.
E.g. here is struct bpf_timer from vmlinux.h before this patch:
The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock. This is safe as the
writes to the stack have a guard VMA which ensures there will always be
a NULL in the direction of the growth and thus will only update a pivot.
It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs. syzbot has constructed a testcase which sets up a
VMA to grow and consume the empty space. Overwriting the entire NULL
entry causes the tree to be altered in a way that is not safe for
concurrent readers; the readers may see a node being rewritten or one
that does not match the maple state they are using.
Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.
Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com Cc: stable@vger.kernel.org Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Cc: stable@vger.kernel.org Reported-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Cc: stable@vger.kernel.org Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Cc: stable@vger.kernel.org Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com Cc: <Stable@vger.kernel.org> Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com Cc: <Stable@vger.kernel.org> Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If mas->node is an MAS_START, there are three cases, and they all assign
different values to mas->node and mas->offset. So there is no need to set
them to a default value before updating.
Update them directly to make them easier to understand and for better
readability.
Link: https://lkml.kernel.org/r/20221221060058.609003-7-vernon2gm@gmail.com Cc: <Stable@vger.kernel.org> Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Vernon Yang <vernon2gm@gmail.com> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an invalidated maple state is encountered during write, reset the maple
state to MAS_START. This will result in a re-walk of the tree to the
correct location for the write.
When iterating, a user may operate on the tree and cause the maple state
to be altered and left in an unintuitive state. Detect this scenario and
correct it by setting to the limit and invalidating the state.
Preallocations are common in the VMA code to avoid allocating under
certain locking conditions. The preallocations must also cover the
worst-case scenario. Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used. Only zero out the necessary
area to keep track of the allocations in the maple state. Zero the entire
node prior to using it in the tree.
This required internal changes to node counting on allocation, so the test
code is also updated.
This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat
Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device. Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access. When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.
The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present. However the fault
handling code does not hold the PTL when taking the page lock. This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.
This can lead to threads locking or waiting on a folio with a zero
refcount. Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration. This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.
Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there. It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.
Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.
Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to use _MMIO_PIPE2() for SKL_BOTTOM_COLOR
since all pipe registers are evenly spread on skl+.
Switch to _MMIO_PIPE() and thus avoid the hidden dev_priv.
Use the correct old/new topology and payload states in
intel_mst_disable_dp(). So far drm_atomic_get_mst_topology_state() it
used returned either the old state, in case the state was added already
earlier during the atomic check phase or otherwise the new state (but
the latter could fail, which can't be handled in the enable/disable
hooks). After the first patch in the patchset, the state should always
get added already during the check phase, so here we can get the
old/new states without a failure.
drm_dp_remove_payload() should use time_slots from the old payload state
and vc_start_slot in the new one. It should update the new payload
states to reflect the sink's current payload table after the payload is
removed. Pass the new topology state and the old and new payload states
accordingly.
This also fixes a problem where the payload allocations for multiple MST
streams on the same link got inconsistent after a few commits, as
during payload removal the old instead of the new payload state got
updated, so the subsequent enabling sequence and commits used a stale
payload state.
v2: Constify the old payload state pointer. (Ville)
Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # 6.1 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-4-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.
The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.
This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.
Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org # 6.1 Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
Hand modified for missing 8c7d980da9ba3eb67a1b40fd4b33bcf49397084b Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The psp suspend & resume should be skipped to avoid destroy
the TMR and reload FWs again for IMU enabled APU ASICs.
Signed-off-by: Tim Huang <tim.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
In case of failure to resume MST topology after suspend, an emtpty
mst tree prevents further mst hub detection on the same connector.
That causes the issue with MST hub hotplug after it's been unplug in
suspend.
[How]
Stop topology manager on the connector after detecting DM_MST failure.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Consider situation as following (on the default hierarchy):
HDD
|
root (bps limit: 4k)
|
child (bps limit :8k)
|
fio bs=8k
Rate of fio is supposed to be 4k, but result is 8k. Reason is as
following:
Size of single IO from fio is larger than bytes allowed in one
throtl_slice in child, so IOs are always queued in child group first.
When queued IOs in child are dispatched to parent group, BIO_BPS_THROTTLED
is set and these IOs will not be limited by tg_within_bps_limit anymore.
Fix this by only set BIO_BPS_THROTTLED when the bio traversed the entire
tree.
There patch has no influence on situation which is not on the default
hierarchy as each group is a single root group without parent.
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be
writable even with uffd-wp bit set. It only happens with hugetlb private
mappings, when someone firstly wr-protects a missing pte (which will
install a pte marker), then a write to the same page without any prior
access to the page.
Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before
reaching hugetlb_wp() to avoid taking more locks that userfault won't
need. However there's one CoW optimization path that can trigger
hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap.
This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit
is detected. The new path will only trigger in the CoW optimization path
because generic hugetlb_fault() (e.g. when a present pte was
wr-protected) will resolve the uffd-wp bit already. Also make sure
anonymous UNSHARE won't be affected and can still be resolved, IOW only
skip CoW not CoR.
This patch will be needed for v5.19+ hence copy stable.
[peterx@redhat.com: v2] Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n
[peterx@redhat.com: v3] Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption. The only place we have found where this
happens is in the swapoff path. This case can be described as below:
core 0 core 1
swapoff
del_from_avail_list(si) waiting
try lock si->lock acquire swap_avail_lock
and re-add si into
swap_avail_head
acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.
It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g. stress-ng-swap).
However, in the worst case, panic can be caused by the above scene. In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap. This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)
Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.
This problem exists in versions after stable 5.10.y.
Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node") Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.
Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
tail_page == commit_page == reader_page == {
.write = 0x100d20,
.read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!!
.entries = 0x10004c,
.real_end = 0x0,
.page = {
.time_stamp = 0x857257416af0,
.commit = 0xd20, // This page hasn't been full filled.
// .data[0...0xd20] seems normal.
}
}
The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.
To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.
Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 77ae365eca89 ("ring-buffer: make lockless") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.
Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.
ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.
Cc: stable@vger.kernel.org # 6.0+ Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This failure really confuse me as there're still lots of available pages.
Finally I figured out it was caused by a fatal signal. When a process is
allocating memory via vm_area_alloc_pages(), it will break directly even
if it hasn't allocated the requested pages when it receives a fatal
signal. In that case, we shouldn't show this warn_alloc, as it is
useless. We only need to show this warning when there're really no enough
pages.
Link: https://lkml.kernel.org/r/20230330162625.13604-1-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a tracing instance is removed, the error messages that hold errors
that occurred in the instance needs to be freed. The following reports a
memory leak:
osnoise/timerlat tracers are reporting new max latency on instances
where the tracing is off, creating inconsistencies between the max
reported values in the trace and in the tracing_max_latency. Thus
only report new tracing_max_latency on active tracing instances.
timerlat is not reporting a new tracing_max_latency for the thread
latency. The reason is that it is not calling notify_new_max_latency()
function after the new thread latency is sampled.
Call notify_new_max_latency() after computing the thread latency.
Currently, the "last_cmd" variable can be accessed by multiple processes
asynchronously when multiple users manipulate synthetic_events node
at the same time, it could lead to use-after-free or double-free.
This patch add "lastcmd_mutex" to prevent "last_cmd" from being accessed
asynchronously.
Queue reset was moved out from __init_dma_rx_desc_rings() and
__init_dma_tx_desc_rings() functions. Thus, the driver fails to transmit
and receive packet after XDP prog setup.
This commit adds the missing queue reset into stmmac_xdp_open() function.
Fixes: f9ec5723c3db ("net: ethernet: stmicro: stmmac: move queue reset to dedicated functions") Cc: <stable@vger.kernel.org> # 6.0+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230404044823.3226144-1-yoong.siang.song@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used
together with one of the older nvidia binary driver series (the latest
series does not support it), then backlight control does not work.
This is caused by commit 3dbc80a3e4c5 ("ACPI: video: Make backlight
class device registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default").
After these changes the acpi_video# backlight device is only registered
when requested by a GPU driver calling acpi_video_register_backlight()
which the nvidia binary driver does not do.
I realize that using the nvidia binary driver is not a supported use-case
and users can workaround this by adding acpi_backlight=video on the kernel
commandline, but the ThinkPad W530 is a popular model under Linux users,
so it seems worthwhile to add a quirk for this.
I will also email Nvidia asking them to make the driver call
acpi_video_register_backlight() when an internal LCD panel is detected.
So maybe the next maintenance release of the drivers will fix this...
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().
(GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.)
Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")
Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.
This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.
This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].
Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).
[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes: 5aa9d943e9b6 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using select()/poll()/epoll() with a non-blocking ISOTP socket to
wait for when non-blocking write is possible, a false EPOLLOUT event
is sometimes returned. This can happen at least after sending a
message which must be split to multiple CAN frames.
The reason is that isotp_sendmsg() returns -EAGAIN when tx.state is
not equal to ISOTP_IDLE and this behavior is not reflected in
datagram_poll(), which is used in isotp_ops.
This is fixed by introducing ISOTP-specific poll function, which
suppresses the EPOLLOUT events in that case.
As discussed with Dae R. Jeong and Hillf Danton here [1] the sendmsg()
function in isotp.c might get into a race condition when restoring the
former tx.state from the old_state.
Remove the old_state concept and implement proper locking for the
ISOTP_IDLE transitions in isotp_sendmsg(), inspired by a
simplification idea from Hillf Danton.
Introduce a new tx.state ISOTP_SHUTDOWN and use the same locking
mechanism from isotp_release() which resolves a potential race between
isotp_sendsmg() and isotp_release().
v1: https://lore.kernel.org/all/20230331102114.15164-1-socketcan@hartkopp.net
v2: https://lore.kernel.org/all/20230331123600.3550-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_release()
v3: https://lore.kernel.org/all/20230331130654.9886-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_sendmsg() in the wait_tx_done case
v4: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net
take care of signal interrupts for wait_event_interruptible() in
isotp_sendmsg() in ALL cases
Cc: Dae R. Jeong <threeearcat@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 4f027cba8216 ("can: isotp: split tx timer into transmission and timeout") Link: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org
[mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.
Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.
Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.
When cleaning up peer group ids in the failure path we need to make sure
to hold on to the namespace lock. Otherwise another thread might just
turn the mount from a shared into a non-shared mount concurrently.
Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().
Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.
To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.
If the compiler decides not to inline this function then preemption
tracing will always show an IP inside the preemption disabling path and
never the function actually calling preempt_{enable,disable}.
Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: f904f58263e1d ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same task check in perf_event_set_output has some potential issues
for some usages.
For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().
Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.
The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").
The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.
The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.
Note: The event->hw.target was introduced later than commit c3f00c70276d. The patch may cannot be applied between the commit c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.
Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.
After a server reboot, clients are failing to move files with ENOENT.
This is caused by DFS referrals containing multiple separators, which
the server move call doesn't recognize.
v1: Initial patch.
v2: Move prototype to header.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182472 Fixes: a31080899d5f ("cifs: sanitize multiple delimiters in prepath")
Actually-Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Thiago Rafael Becker <tbecker@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The device can report discard support without setting the ONCS DSM bit.
When not set, the driver clears max_discard_size expecting it to be set
later. We don't know the size until we have the namespace format,
though, so setting it is deferred until configuring one, but the driver
was abandoning the discard settings due to that initial clearing.
Move the max_discard_size calculation above the check for a '0' discard
size.
The validity of sock should be checked before assignment to avoid incorrect
values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref
while calling getpeername()") introduced this change which may lead to
inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en.
Fix the issue by moving the position of the assignment.
Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com> Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process.
Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When removing provided buffers, io_buffer structs are not being disposed
of, leading to a memory leak. They can't be freed individually, because
they are allocated in page-sized groups. They need to be added to some
free list instead, such as io_buffers_cache. All callers already hold
the lock protecting it, apart from when destroying buffers, so had to
extend the lock there.
When a request to remove buffers is submitted, and the given number to be
removed is larger than available in the specified buffer group, the
resulting CQE result will be the number of removed buffers + 1, which is
1 more than it should be.
Previously, the head was part of the list and it got removed after the
loop, so the increment was needed. Now, the head is not an element of
the list, so the increment shouldn't be there anymore.
Polling needs a bio with a valid bi_bdev, but neither of those are
guaranteed for polled driver requests. Make request based polling
directly use blk-mq's polling function instead.
When executing a request from a polled hctx, we know the request's
cookie, and that it's from a live blk-mq queue that supports polling, so
we can safely skip everything that bio_poll provides.
Cc: stable@kernel.org Reported-by: Martin Belanger <Martin.Belanger@dell.com> Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Revieded-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230331180056.1155862-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signal 16 and higher represent the device's Index lines. The
priv->preset_enable array holds the device configuration for these Index
lines. The preset_enable configuration is active low on the device, so
invert the conditional check in quad8_action_read() to properly handle
the logical state of preset_enable.
The Counter (CNTR) register is 24 bits wide, but we can have an
effective 25-bit count value by setting bit 24 to the XOR of the Borrow
flag and Carry flag. The flags can be read from the FLAG register, but a
race condition exists: the Borrow flag and Carry flag are instantaneous
and could change by the time the count value is read from the CNTR
register.
Since the race condition could result in an incorrect 25-bit count
value, remove support for 25-bit count values from this driver;
hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define
for consistency and clarity.
Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Cc: <stable@vger.kernel.org> # 6.1.x Cc: <stable@vger.kernel.org> # 6.2.x Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CoreSight ETM4x architecture clearly provides ways to identify a device
via registers in the "Management" class, TRCDEVARCH and TRCDEVTYPE. These
registers can be accessed without the Trace domain being powered on.
We additionally added TRCIDR1 as fallback in order to cover for any
ETMs that may not have implemented TRCDEVARCH. So far, nobody has
reported hitting a WARNING we placed to catch such systems.
Also, more importantly it is problematic to access TRCIDR1, which is a
"Trace" register via MMIO access, without clearing the OSLK. But we cannot
mess with the OSLK until we know for sure that this is an ETMv4 device.
Thus, this kind of creates a chicken and egg problem unnecessarily for
systems "which are compliant" to the ETMv4 architecture.
Let us remove the TRCIDR1 fall back check and rely only on TRCDEVARCH.
The struct pages could be discontiguous when the kfence pool is allocated
via alloc_contig_pages() with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.
This may result in setting PG_slab and memcg_data to a arbitrary
address (may be not used as a struct page), which in the worst case
might corrupt the kernel.
So the iteration should use nth_page().
Link: https://lkml.kernel.org/r/20230323025003.94447-1-songmuchun@bytedance.com Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It does not reset PG_slab and memcg_data when KFENCE fails to initialize
kfence pool at runtime. It is reporting a "Bad page state" message when
kfence pool is freed to buddy. The checking of whether it is a compound
head page seems unnecessary since we already guarantee this when
allocating kfence pool. Remove the check to simplify the code.
Link: https://lkml.kernel.org/r/20230320030059.20189-1-songmuchun@bytedance.com Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Cc: Marco Elver <elver@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sjpark@amazon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit:
This bit is always 0 if the VM exit occurred while the logical processor
was in real-address mode (CR0.PE=0).
The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / jedix / linux-maple.git / log