Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way. So now we simply keep
the PCI SSID order for the whole.
Also Cc-to-stable for the further patch applications.
Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also, user lower hex letters in the entry.
Also Cc-to-stable for the further patch applications.
Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.
Also Cc-to-stable for the further patch applications.
[Why]
This hasn't been well tested and leads to complete system hangs on DCN1
based systems, possibly others.
The system hang can be reproduced by gesturing the video on the YouTube
Android app on ChromeOS into full screen.
[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.
v2:
- Add code comment describing the reason we're rejecting non-zero
src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next
v3: removed trailing whitespace
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Cc: nicholas.kazlauskas@amd.com Cc: amd-gfx@lists.freedesktop.org Cc: alexander.deucher@amd.com Cc: Roman.Li@amd.com Cc: hersenxs.wu@amd.com Cc: danny.wang@amd.com Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can
copy back uninitialised data in value_tmp that pointer *value points
to. This can occur when rdev->family is less than CHIP_BONAIRE and
less than CHIP_TAHITI. Fix this by adding in a missing -EINVAL
so that no invalid value is copied back to userspace.
Addresses-Coverity: ("Uninitialized scalar variable) Cc: stable@vger.kernel.org # 3.13+ Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.
When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.
The problem arises because the value of group is 5 for channel 14. The trivial
increase in the dimension of bw40_base fails as this struct must match the layout of
efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set
the group for channel 14 to 4 if rate <= DESC_RATE11M.
This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")
Fixes: fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") Reported-by: Богдан Пилипенко <bogdan.pylypenko107@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210401192717.28927-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we overflow the maximum number of BSS entries and free the
new entry, drop it from any hidden_list that it may have been
added to in the code above or in cfg80211_combine_bsses().
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.
This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).
For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.
Split mddev_find into a simple mddev_find that just finds an existing
mddev by the unit number, and a more complicated mddev_find that deals
with find or allocating a mddev.
This turns out to fix this bug reported by Zhao Heming.
----------------------------- snip ------------------------------
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bio in the above stack is a bitmap write whose completion is invoked after
the tear down sequence sets the mddev structure to NULL in rdev.
During tear down, there is an attempt to flush the bitmap writes, but for
external bitmaps, there is no explicit wait for all the bitmap writes to
complete. For instance, md_bitmap_flush() is called to flush the bitmap
writes, but the last call to md_bitmap_daemon_work() in md_bitmap_flush()
could generate new bitmap writes for which there is no explicit wait to
complete those writes. The call to md_bitmap_update_sb() will return
simply for external bitmaps and the follow-up call to md_update_sb() is
conditional and may not get called for external bitmaps. This results in a
kernel panic when the completion routine, super_written() is called which
tries to reference mddev in the rdev that has been set to
NULL(in unbind_rdev_from_array() by tear down sequence).
The solution is to call md_super_wait() for external bitmaps after the
last call to md_bitmap_daemon_work() in md_bitmap_flush() to ensure there
are no pending bitmap writes before proceeding with the tear down.
Cc: stable@vger.kernel.org Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Reviewed-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.
Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
vmci_dbell_register_notification_bitmap+0x50/0x1e0
vmci_dbell_register_notification_bitmap+0x50/0x1e0
Bytes 28-31 of 32 are uninitialized
Memory access of size 32 starts at ffff88810098f570
=====================================================
Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.
The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.
The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:
Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.
Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.
Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.
Whilst running some basic tests as part of writing up the dt-bindings for
this driver (to follow), it became clear it doesn't actually load
currently.
iio iio:device1: tried to double register : in_incli_x_index
adis16201 spi0.0: Failed to create buffer sysfs interfaces
adis16201: probe of spi0.0 failed with error -16
Looks like a cut and paste / update bug. Fixes tag obviously not accurate
but we don't want to bother carry thing back to before the driver moved
out of staging.
Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") disabled access
to VPD of the ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter because
reading past the end of the VPD caused NMIs.
104daa71b396 ("PCI: Determine actual VPD size on first access") limits
reads to the actual size of VPD, which should prevent these NMIs.
104daa71b396 was merged *before* 0d5370d1d852, but we think the testing
that prompted 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722")
was done with a kernel that lacked 104daa71b396. See [1, 2].
Remove the quirk added by 0d5370d1d852 ("PCI: Prevent VPD access for QLogic
ISP2722") so customers can read the HBA VPD.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
For those systems the PCI BARs that request a mapping in the I/O space
have the length recorded in the corresponding PCI resource set to zero,
which makes it unassigned:
# lspci -s 0031:02:04.0 -v
0031:02:04.0 FDDI network controller: Digital Equipment Corporation PCI-to-PDQ Interface Chip [PFI] FDDI (DEFPA) (rev 02)
Subsystem: Digital Equipment Corporation FDDIcontroller/PCI (DEFPA)
Flags: bus master, medium devsel, latency 136, IRQ 57, NUMA node 8
Memory at 620c080020000 (32-bit, non-prefetchable) [size=128]
I/O ports at <unassigned> [disabled]
Memory at 620c080030000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: defxx
Kernel modules: defxx
#
Regardless the driver goes ahead and requests it (here observed with a
Raptor Talos II POWER9 system), resulting in an odd /proc/ioport entry:
Furthermore, the system gets confused as the driver actually continues
and pokes at those locations, causing a flood of messages being output
to the system console by the underlying system firmware, like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
defxx 0031:02:04.0: enabling device (0140 -> 0142)
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010000
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
and so on and so on (possibly intermixed actually, as there's no locking
between the kernel and the firmware in console port access with this
particular system, but cleaned up above for clarity), and once some 10k
of such pairs of the latter two messages have been produced an interace
eventually shows up in a useless state:
This was not expected to happen as resource handling was added to the
driver a while ago, because it was not known at that time that a PCI
system would be possible that cannot assign port I/O resources, and
oddly enough `request_region' does not fail, which would have caught it.
Correct the problem then by checking for the length of zero for the CSR
resource and bail out gracefully refusing to register an interface if
that turns out to be the case, producing messages like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
0031:02:04.0: Cannot use I/O, no address set, aborting
0031:02:04.0: Recompile driver with "CONFIG_DEFXX_MMIO=y"
Keep the original check for the EISA MMIO resource as implemented,
because in that case the length is hardwired to 0x400 as a consequence
of how the compare/mask address decoding works in the ESIC chip and it
is only the base address that is set to zero if MMIO has been disabled
for the adapter in EISA configuration, which in turn could be a valid
bus address in a legacy-free system implementing PCI, especially for
port I/O.
Where the EISA MMIO resource has been disabled for the adapter in EISA
configuration this arrangement keeps producing messages like:
eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
00:05: Cannot use MMIO, no address set, aborting
00:05: Recompile driver with "CONFIG_DEFXX_MMIO=n"
00:05: Or run ECU and set adapter's MMIO location
with the last two lines now swapped for easier handling in the driver.
There is no need to check for and catch the case of a port I/O resource
not having been assigned for EISA as the adapter uses the slot-specific
I/O space, which gets assigned by how EISA has been specified and maps
directly to the particular slot an option card has been placed in. And
the EISA variant of the adapter has additional registers that are only
accessible via the port I/O space anyway.
While at it factor out the error message calls into helpers and fix an
argument order bug with the `pr_err' call now in `dfx_register_res_err'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 4d0438e56a8f ("defxx: Clean up DEFEA resource management") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which
for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed,
only slots/funcs with devices attached would be called. While arguably
the right thing, that left no chance for this driver to ever initialize
slot 0, effectively bricking PCI and USB on RT2880 devices such as the
Belkin F5D8235-4 v1.
Slot 0 configuration needs to happen after PCI bus enumeration, but
before any device at slot 0x11 (func 0 or 1) is talked to. That was
determined empirically by testing on a Belkin F5D8235-4 v1 device. A
minimal BAR 0 config write followed by read, then setting slot 0
PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for
proper functionality.
Tested by ensuring that full- and high-speed USB devices get enumerated
on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt).
Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Tobias Wolf <dev-NTEO@vplace.de> Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream a long-standing OpenWrt patch [0] that fixes MT7620 PCIe PLL
lock check. The existing code checks the wrong register bit: PPLL_SW_SET
is not defined in PPLL_CFG1 and bit 31 of PPLL_CFG1 is marked as reserved
in the MT7620 Programming Guide. The correct bit to check for PLL lock
is PPLL_LD (bit 23).
Also reword the error message for clarity.
Without this change it is unlikely that this driver ever worked with
mainline kernel.
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.
The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.
This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.
Tested for all use cases of the driver.
Based on similar fix in kbl_rt5663_rt5514_max98927.c
from Harsha Priya <harshapriya.n@intel.com> and
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef51a ("ASoC: samsung: Add support for HDMI audio on TM2 board") Cc: <stable@vger.kernel.org> Suggested-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the USB headset is plug into an external hub, sometimes
can't set config due to not enough bandwidth, so need improve
LS/FS INT/ISOC bandwidth scheduling with TT.
Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.
power_supply_changed needs to be called to notify clients
after the partner accepts the requested values for the pps
case.
Also, remove the redundant power_supply_changed at the end
of the tcpm_reset_port as power_supply_changed is already
called right after usb_type is changed.
tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
port->pps_data.max_volt, port->pps_data.max_curr even before
port partner accepts the requests. This leaves incorrect values
in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
req_op_curr. min_volt, max_volt, max_curr gets updated once the
partner accepts the request. current_limit, supply_voltage gets updated
once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
current_limit and supply_voltage is enforced.
tcpm_pd_build_request overwrites current_limit and supply_voltage
even before port partner accepts the requests. This leaves stale
values in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values of current limit/supply voltage in req_current_limit
and req_supply_voltage. current_limit/supply_voltage gets updated
once the port partner accepts the request.
The offending commit claimed that trying to set the values reported back
by TIOCGSERIAL as a regular user could result in an -EPERM error when HZ
is 250, but that was never the case.
With HZ=250, the default 0.5 second value of close_delay is converted to
125 jiffies when set and is converted back to 50 centiseconds by
TIOCGSERIAL as expected (not 12 cs as was claimed, even if that was the
case before an earlier fix).
Comparing the internal current and new jiffies values is just fine to
determine if the value is about to change so drop the bogus workaround
(which was also backported to stable).
For completeness: With different default values for these parameters or
with a HZ value not divisible by two, the lack of rounding when setting
the default values in tty_port_init() could result in an -EPERM being
returned, but this is hardly something we need to worry about.
Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.
This can be triggered by the following simple program:
int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
addr.sa_family = AF_NFC;
addr.nfc_protocol = NFC_PROTO_NFC_DEP;
bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
close(sock1);
close(sock2);
Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.
This addresses CVE-2021-23134.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Reported-by: Nadav Markus <nmarkus@paloaltonetworks.com> Fixes: c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()") Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn> Cc: Marcel Holtmann <marcel@holtmann.org> Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When HSR interface is sending a frame, it finds a node with
the destination ethernet address from the list.
If there is no node, it calls WARN_ONCE().
But, using WARN_ONCE() for this situation is a little bit overdoing.
So, in this patch, the netdev_err() is used instead.
Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
When loading a device-mapper table for a request-based mapped device,
and the allocation/initialization of the blk_mq_tag_set for the device
fails, a following device remove will cause a double free.
When allocation/initialization of the blk_mq_tag_set fails in
dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer
is not reset to NULL; so when dev_remove() later gets into
dm_mq_cleanup_mapped_device() it sees the pointer and tries to
uninitialize and free it again.
Fix this by setting the pointer to NULL in dm_mq_init_request_queue()
error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().
Cc: <stable@vger.kernel.org> # 4.6+ Fixes: 1c357a1e86a4 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device") Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This division bug meant the search for free metadata space could skip
the final allocation bitmap's worth of entries. Fix affects DM thinp,
cache and era targets.
Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Tested-by: Ming-Hung Tsai <mtsai@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home Cc: stable@vger.kernel.org Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
The rsi_resume() does access the bus to enable interrupts on the RSI
SDIO WiFi card, however when calling sdio_claim_host() in the resume
path, it is possible the bus is already claimed and sdio_claim_host()
spins indefinitelly. Enable the SDIO card interrupts in resume_noirq
instead to prevent anything else from claiming the SDIO bus first.
Fixes: 20db07332736 ("rsi: sdio suspend and resume support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327235932.175896-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported memory leak in tty/vt.
The problem was in VT_DISALLOCATE ioctl cmd.
After allocating unimap with PIO_UNIMAP it wasn't
freed via VT_DISALLOCATE, but vc_cons[currcons].d was
zeroed.
The START_TRANSFER command needs to be executed while in ON/U0 link
state (with an exception during register initialization). Don't use
dwc->link_state to check this since the driver only tracks the link
state when the link state change interrupt is enabled. Check the link
state from DSTS register instead.
Note that often the host already brings the device out of low power
before it sends/requests the next transfer. So, the user won't see any
issue when the device starts transfer then. This issue is more
noticeable in cases when the device delays starting transfer, which can
happen during delayed control status after the host put the device in
low power.
Fixes bug with the handling of more than one language in
the string table in f_fs.c.
str_count was not reset for subsequent language codes.
str_count-- "rolls under" and processes u32 max strings on
the processing of the second language entry.
The existing bug can be reproduced by adding a second language table
to the structure "strings" in tools/usb/ffs-test.c.
Upon driver unbind usb_free_all_descriptors() function frees all
speed descriptor pointers without setting them to NULL. In case
gadget speed changes (i.e from super speed plus to super speed)
after driver unbind only upto super speed descriptor pointers get
populated. Super speed plus desc still holds the stale (already
freed) pointer. Fix this issue by setting all descriptor pointers
to NULL after freeing them in usb_free_all_descriptors().
Fixes: f5c61225cf29 ("usb: gadget: Update function for SuperSpeedPlus")
cc: stable@vger.kernel.org Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1619034452-17334-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a general protection fault reported by syzbot due to a race between
gadget_setup() and gadget_unbind() in raw_gadget.
The gadget core is supposed to guarantee that there won't be any more
callbacks to the gadget driver once the driver's unbind routine is
called. That guarantee is enforced in usb_gadget_remove_driver as
follows:
usb_gadget_disconnect(udc->gadget);
if (udc->gadget->irq)
synchronize_irq(udc->gadget->irq);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc);
usb_gadget_disconnect turns off the pullup resistor, telling the host
that the gadget is no longer connected and preventing the transmission
of any more USB packets. Any packets that have already been received
are sure to processed by the UDC driver's interrupt handler by the time
synchronize_irq returns.
But this doesn't work with dummy_hcd, because dummy_hcd doesn't use
interrupts; it uses a timer instead. It does have code to emulate the
effect of synchronize_irq, but that code doesn't get invoked at the
right time -- it currently runs in usb_gadget_udc_stop, after the unbind
callback instead of before. Indeed, there's no way for
usb_gadget_remove_driver to invoke this code before the unbind callback.
To fix this, move the synchronize_irq() emulation code to dummy_pullup
so that it runs before unbind. Also, add a comment explaining why it is
necessary to have it there.
Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.
Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.
If there in an error during a set_fmt, do not overwrite the previous
sizes with the invalid config.
Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and
causing the following OOPs
[ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes)
[ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0
[ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP
dvb_usb_device_init() allocates a dvb_usb_device object, but it
doesn't release the object by itself even at errors. The object is
released in the callee side (dvb_usb_init()) in some error cases via
dvb_usb_exit() call, but it also missed the object free in other error
paths. And, the caller (it's only dvb_usb_device_init()) doesn't seem
caring the resource management as well, hence those memories are
leaked.
This patch assures releasing the memory at the error path in
dvb_usb_device_init(). Now dvb_usb_init() frees the resources it
allocated but leaves the passed dvb_usb_device object intact. In
turn, the dvb_usb_device object is released in dvb_usb_device_init()
instead.
We could use dvb_usb_exit() function for releasing everything in the
callee (as it was used for some error cases in the original code), but
releasing the passed object in the callee is non-intuitive and
error-prone. So I took this approach (which is more standard in Linus
kernel code) although it ended with a bit more open codes.
Along with the change, the patch makes sure that USB intfdata is reset
and don't return the bogus pointer to the caller of
dvb_usb_device_init() at the error path, too.
Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dvb_usb_device_init() copies the properties to the own data, so that
the callers can release the original properties later (as done in the
commit 299c7007e936 ("media: dw2102: Fix memleak on sequence of
probes")). However, it also stores dev->desc pointer that is a
reference to the original properties data. Since dev->desc is
referred later, it may result in use-after-free, in the worst case,
leading to a kernel Oops as reported.
This patch addresses the problem by allocating and copying the
properties at first, then get the desc from the copied properties.
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181104 Reviewed-by: Robert Foss <robert.foss@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn`
before setting it to NULL, as documented in include/media/media-device.h:
"The media_entity instance itself must be freed explicitly by the driver
if required."
We should set the error code when ext4_commit_super check argument failed.
Found in code review. Fixes: c4be0c1dc4cdc ("filesystem freeze: add error handling of write_super_lockfs/unlockfs"). Cc: stable@kernel.org Signed-off-by: Fengnan Chang <changfengnan@vivo.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20210402101631.561-1-changfengnan@vivo.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().
After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.
Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: stable@kernel.org Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the timestamp of the .config file is updated, config_data.gz is
regenerated, then vmlinux is re-linked. This occurs even if the content
of the .config has not changed at all.
This issue was mitigated by commit 67424f61f813 ("kconfig: do not write
.config if the content is the same"); Kconfig does not update the
.config when it ends up with the identical configuration.
The issue is remaining when the .config is created by *_defconfig with
some config fragment(s) applied on top.
This is typical for powerpc and mips, where several *_defconfig targets
are constructed by using merge_config.sh.
One workaround is to have the copy of the .config. The filechk rule
updates the copy, kernel/config_data, by checking the content instead
of the timestamp.
With this commit, the second run with the same configuration avoids
the needless rebuilds.
$ make ARCH=mips defconfig all
[ snip ]
$ make ARCH=mips defconfig all
*** Default configuration is based on target '32r2el_defconfig'
Using ./arch/mips/configs/generic_defconfig as base
Merging arch/mips/configs/generic/32r2.config
Merging arch/mips/configs/generic/el.config
Merging ./arch/mips/configs/generic/board-boston.config
Merging ./arch/mips/configs/generic/board-ni169445.config
Merging ./arch/mips/configs/generic/board-ocelot.config
Merging ./arch/mips/configs/generic/board-ranchu.config
Merging ./arch/mips/configs/generic/board-sead-3.config
Merging ./arch/mips/configs/generic/board-xilfpga.config
#
# configuration written to .config
#
SYNC include/config/auto.conf
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
CHK include/generated/compile.h
CHK include/generated/autoksyms.h
Initialize MSR_TSC_AUX with CPU node information if RDTSCP or RDPID is
supported. This fixes a bug where vdso_read_cpunode() will read garbage
via RDPID if RDPID is supported but RDTSCP is not. While no known CPU
supports RDPID but not RDTSCP, both Intel's SDM and AMD's APM allow for
RDPID to exist without RDTSCP, e.g. it's technically a legal CPU model
for a virtual machine.
Note, technically MSR_TSC_AUX could be initialized if and only if RDPID
is supported since RDTSCP is currently not used to retrieve the CPU node.
But, the cost of the superfluous WRMSR is negigible, whereas leaving
MSR_TSC_AUX uninitialized is just asking for future breakage if someone
decides to utilize RDTSCP.
Fixes: a582c540ac1b ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210504225632.1532621-2-seanjc@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FUTEX_WAIT operand has historically a relative timeout which means that
the clock id is irrelevant as relative timeouts on CLOCK_REALTIME are not
subject to wall clock changes and therefore are mapped by the kernel to
CLOCK_MONOTONIC for simplicity.
If a caller would set FUTEX_CLOCK_REALTIME for FUTEX_WAIT the timeout is
still treated relative vs. CLOCK_MONOTONIC and then the wait arms that
timeout based on CLOCK_REALTIME which is broken and obviously has never
been used or even tested.
Reject any attempt to use FUTEX_CLOCK_REALTIME with FUTEX_WAIT again.
The desired functionality can be achieved with FUTEX_WAIT_BITSET and a
FUTEX_BITSET_MATCH_ANY argument.
Fixes: 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210422194704.834797921@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KASAN reports a BUG when download file in jffs2 filesystem.It is
because when dstlen == 1, cpage_out will write array out of bounds.
Actually, data will not be compressed in jffs2_zlib_compress() if
data's length less than 4.
[ 393.799778] BUG: KASAN: slab-out-of-bounds in jffs2_rtime_compress+0x214/0x2f0 at addr ffff800062e3b281
[ 393.809166] Write of size 1 by task tftp/2918
[ 393.813526] CPU: 3 PID: 2918 Comm: tftp Tainted: G B 4.9.115-rt93-EMBSYS-CGEL-6.1.R6-dirty #1
[ 393.823173] Hardware name: LS1043A RDB Board (DT)
[ 393.827870] Call trace:
[ 393.830322] [<ffff20000808c700>] dump_backtrace+0x0/0x2f0
[ 393.835721] [<ffff20000808ca04>] show_stack+0x14/0x20
[ 393.840774] [<ffff2000086ef700>] dump_stack+0x90/0xb0
[ 393.845829] [<ffff20000827b19c>] kasan_object_err+0x24/0x80
[ 393.851402] [<ffff20000827b404>] kasan_report_error+0x1b4/0x4d8
[ 393.857323] [<ffff20000827bae8>] kasan_report+0x38/0x40
[ 393.862548] [<ffff200008279d44>] __asan_store1+0x4c/0x58
[ 393.867859] [<ffff2000084ce2ec>] jffs2_rtime_compress+0x214/0x2f0
[ 393.873955] [<ffff2000084bb3b0>] jffs2_selected_compress+0x178/0x2a0
[ 393.880308] [<ffff2000084bb530>] jffs2_compress+0x58/0x478
[ 393.885796] [<ffff2000084c5b34>] jffs2_write_inode_range+0x13c/0x450
[ 393.892150] [<ffff2000084be0b8>] jffs2_write_end+0x2a8/0x4a0
[ 393.897811] [<ffff2000081f3008>] generic_perform_write+0x1c0/0x280
[ 393.903990] [<ffff2000081f5074>] __generic_file_write_iter+0x1c4/0x228
[ 393.910517] [<ffff2000081f5210>] generic_file_write_iter+0x138/0x288
[ 393.916870] [<ffff20000829ec1c>] __vfs_write+0x1b4/0x238
[ 393.922181] [<ffff20000829ff00>] vfs_write+0xd0/0x238
[ 393.927232] [<ffff2000082a1ba8>] SyS_write+0xa0/0x110
[ 393.932283] [<ffff20000808429c>] __sys_trace_return+0x0/0x4
[ 393.937851] Object at ffff800062e3b280, in cache kmalloc-64 size: 64
[ 393.944197] Allocated:
[ 393.946552] PID = 2918
[ 393.948913] save_stack_trace_tsk+0x0/0x220
[ 393.953096] save_stack_trace+0x18/0x20
[ 393.956932] kasan_kmalloc+0xd8/0x188
[ 393.960594] __kmalloc+0x144/0x238
[ 393.963994] jffs2_selected_compress+0x48/0x2a0
[ 393.968524] jffs2_compress+0x58/0x478
[ 393.972273] jffs2_write_inode_range+0x13c/0x450
[ 393.976889] jffs2_write_end+0x2a8/0x4a0
[ 393.980810] generic_perform_write+0x1c0/0x280
[ 393.985251] __generic_file_write_iter+0x1c4/0x228
[ 393.990040] generic_file_write_iter+0x138/0x288
[ 393.994655] __vfs_write+0x1b4/0x238
[ 393.998228] vfs_write+0xd0/0x238
[ 394.001543] SyS_write+0xa0/0x110
[ 394.004856] __sys_trace_return+0x0/0x4
[ 394.008684] Freed:
[ 394.010691] PID = 2918
[ 394.013051] save_stack_trace_tsk+0x0/0x220
[ 394.017233] save_stack_trace+0x18/0x20
[ 394.021069] kasan_slab_free+0x88/0x188
[ 394.024902] kfree+0x6c/0x1d8
[ 394.027868] jffs2_sum_write_sumnode+0x2c4/0x880
[ 394.032486] jffs2_do_reserve_space+0x198/0x598
[ 394.037016] jffs2_reserve_space+0x3f8/0x4d8
[ 394.041286] jffs2_write_inode_range+0xf0/0x450
[ 394.045816] jffs2_write_end+0x2a8/0x4a0
[ 394.049737] generic_perform_write+0x1c0/0x280
[ 394.054179] __generic_file_write_iter+0x1c4/0x228
[ 394.058968] generic_file_write_iter+0x138/0x288
[ 394.063583] __vfs_write+0x1b4/0x238
[ 394.067157] vfs_write+0xd0/0x238
[ 394.070470] SyS_write+0xa0/0x110
[ 394.073783] __sys_trace_return+0x0/0x4
[ 394.077612] Memory state around the buggy address:
[ 394.082404] ffff800062e3b180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 394.089623] ffff800062e3b200: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 394.096842] >ffff800062e3b280: 01 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 394.104056] ^
[ 394.107283] ffff800062e3b300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 394.114502] ffff800062e3b380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 394.121718] ==================================================================
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
gcc-11 introdces a harmless warning for cap_inode_getsecurity:
security/commoncap.c: In function ‘cap_inode_getsecurity’:
security/commoncap.c:440:33: error: ‘memcpy’ reading 16 bytes from a region of size 0 [-Werror=stringop-overread]
440 | memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is that tmpbuf is initialized to NULL, so gcc assumes
it is not accessible unless it gets set by vfs_getxattr_alloc(). This is
a legitimate warning as far as I can tell, but the code is correct since
it correctly handles the error when that function fails.
Add a separate NULL check to tell gcc about it as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: James Morris <jamorris@linux.microsoft.com> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two modes for write(2) and friends in fuse:
a) write through (update page cache, send sync WRITE request to userspace)
b) buffered write (update page cache, async writeout later)
The write through method kept all the page cache pages locked that were
used for the request. Keeping more than one page locked is deadlock prone
and Qian Cai demonstrated this with trinity fuzzing.
The reason for keeping the pages locked is that concurrent mapped reads
shouldn't try to pull possibly stale data into the page cache.
For full page writes, the easy way to fix this is to make the cached page
be the authoritative source by marking the page PG_uptodate immediately.
After this the page can be safely unlocked, since mapped/cached reads will
take the written data from the cache.
Concurrent mapped writes will now cause data in the original WRITE request
to be updated; this however doesn't cause any data inconsistency and this
scenario should be exceedingly rare anyway.
If the WRITE request returns with an error in the above case, currently the
page is not marked uptodate; this means that a concurrent read will always
read consistent data. After this patch the page is uptodate between
writing to the cache and receiving the error: there's window where a cached
read will read the wrong data. While theoretically this could be a
regression, it is unlikely to be one in practice, since this is normal for
buffered writes.
In case of a partial page write to an already uptodate page the locking is
also unnecessary, with the above caveats.
Partial write of a not uptodate page still needs to be handled. One way
would be to read the complete page before doing the write. This is not
possible, since it might break filesystems that don't expect any READ
requests when the file was opened O_WRONLY.
The other solution is to serialize the synchronous write with reads from
the partial pages. The easiest way to do this is to keep the partial pages
locked. The problem is that a write() may involve two such pages (one head
and one tail). This patch fixes it by only locking the partial tail page.
If there's a partial head page as well, then split that off as a separate
WRITE request.
If fast table reloads occur during an ongoing reshape of raid4/5/6
devices the target may race reading a superblock vs the the MD resync
thread; causing an inconclusive reshape state to be read in its
constructor.
lvm2 test lvconvert-raid-reshape-stripes-load-reload.sh can cause
BUG_ON() to trigger in md_run(), e.g.:
"kernel BUG at drivers/md/raid5.c:7567!".
Scenario triggering the bug:
1. the MD sync thread calls end_reshape() from raid5_sync_request()
when done reshaping. However end_reshape() _only_ updates the
reshape position to MaxSector keeping the changed layout
configuration though (i.e. any delta disks, chunk sector or RAID
algorithm changes). That inconclusive configuration is stored in
the superblock.
2. dm-raid constructs a mapping, loading named inconsistent superblock
as of step 1 before step 3 is able to finish resetting the reshape
state completely, and calls md_run() which leads to mentioned bug
in raid5.c.
3. the MD RAID personality's finish_reshape() is called; which resets
the reshape information on chunk sectors, delta disks, etc. This
explains why the bug is rarely seen on multi-core machines, as MD's
finish_reshape() superblock update races with the dm-raid
constructor's superblock load in step 2.
Fix identifies inconclusive superblock content in the dm-raid
constructor and resets it before calling md_run(), factoring out
identifying checks into rs_is_layout_change() to share in existing
rs_reshape_requested() and new rs_reset_inclonclusive_reshape(). Also
enhance a comment and remove an empty line.
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).
Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto_stats_get() is a no-op when the kernel is compiled without
CONFIG_CRYPTO_STATS, so pairing it with crypto_alg_put() unconditionally
(as crypto_rng_reset() does) is wrong.
Fix this by moving the call to crypto_stats_get() to just before the
actual algorithm operation which might need it. This makes it always
paired with crypto_stats_rng_seed().
Fixes: eed74b3eba9e ("crypto: rng - Fix a refcounting bug in crypto_rng_reset()") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid allocating memory and reading the host log when a virtual device
is used since this log is of no use to that driver. A virtual
device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which
is only set for the tpm_vtpm_proxy driver.
Cc: stable@vger.kernel.org Fixes: 6f99612e2500 ("tpm: Proxy driver for supporting multiple emulated TPMs") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tpm_read_log_efi is called multiple times, which happens when
one loads and unloads a TPM2 driver multiple times, then the global
variable efi_tpm_final_log_size will at some point become a negative
number due to the subtraction of final_events_preboot_size occurring
each time. Use a local variable to avoid this integer underflow.
The following issue is now resolved:
Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20
Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4
Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206
Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f
Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d
Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073
Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5
Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018
Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000
Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0
Mar 8 15:35:12 hibinst kernel: Call Trace:
Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7
Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0
Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260
Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy]
Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370
Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0
Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370
Cc: stable@vger.kernel.org Fixes: 166a2809d65b ("tpm: Don't duplicate events from the final event log in the TCG2 log") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few archs like powerpc have different errno.h values for macros
EDEADLOCK and EDEADLK. In code including both libc and linux versions of
errno.h, this can result in multiple definitions of EDEADLOCK in the
include chain. Definitions to the same value (e.g. seen with mips) do
not raise warnings, but on powerpc there are redefinitions changing the
value, which raise warnings and errors (if using "-Werror").
Guard against these redefinitions to avoid build errors like the following,
first seen cross-compiling libbpf v5.8.9 for powerpc using GCC 8.4.0 with
musl 1.1.24:
In file included from ../../arch/powerpc/include/uapi/asm/errno.h:5,
from ../../include/linux/err.h:8,
from libbpf.c:29:
../../include/uapi/asm-generic/errno.h:40: error: "EDEADLOCK" redefined [-Werror]
#define EDEADLOCK EDEADLK
In file included from toolchain-powerpc_8540_gcc-8.4.0_musl/include/errno.h:10,
from libbpf.c:26:
toolchain-powerpc_8540_gcc-8.4.0_musl/include/bits/errno.h:58: note: this is the location of the previous definition
#define EDEADLOCK 58
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit 33439620680be ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
KASAN report a slab-out-of-bounds problem. The logs are listed below.
It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1"
bytes for fd->name and we check crc with length rd->nsize. If checkedlen
is less than rd->nsize, it will cause the slab-out-of-bounds problem.
jffs2: Dirent at *** has zeroes in name. Truncating to %d char
==================================================================
BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1
Read of size 1 by task test_JFFS2/915
=============================================================================
BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915
___slab_alloc+0x580/0x5f0
__slab_alloc.isra.24+0x4e/0x64
__kmalloc+0x170/0x300
jffs2_alloc_full_dirent+0x2a/0x40
jffs2_scan_eraseblock+0x1ca4/0x3b64
jffs2_scan_medium+0x285/0xfe0
jffs2_do_mount_fs+0x5fb/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915
__slab_free+0x372/0x4e4
kfree+0x1d4/0x20c
jffs2_free_full_dirent+0x22/0x40
jffs2_build_remove_unlinked_inode+0x17a/0x1e4
jffs2_do_mount_fs+0x1646/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
entry_SYSCALL_64_fastpath+0x1e/0x97
Call Trace:
[<ffffffff815befef>] dump_stack+0x59/0x7e
[<ffffffff812d1d65>] print_trailer+0x125/0x1b0
[<ffffffff812d82c8>] object_err+0x34/0x40
[<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534
[<ffffffff81132401>] ? vprintk+0x2d/0x40
[<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260
[<ffffffff812db41a>] kasan_report+0x26/0x30
[<ffffffff812d9fc1>] __asan_load1+0x3d/0x50
[<ffffffff815f1ee2>] crc32_le+0x1ce/0x260
[<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40
[<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64
[<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0
[<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc
[<ffffffff818169fb>] ? mtd_point+0xf7/0x130
[<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0
[<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d57df>] ? __kmalloc+0x12b/0x300
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240
[<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc
[<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac
[<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0
[<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144
[<ffffffff81819eb6>] mount_mtd+0x222/0x2f0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144
[<ffffffff81258757>] ? free_pages+0x13/0x1c
[<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0
[<ffffffff81492b35>] jffs2_mount+0x41/0x60
[<ffffffff81302fb7>] mount_fs+0x63/0x230
[<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0
[<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4
[<ffffffff8133ceec>] do_mount+0xae8/0x1940
[<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10
[<ffffffff8133c404>] ? copy_mount_string+0x40/0x40
[<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc
[<ffffffff81253a89>] ? __get_free_pages+0x25/0x50
[<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264
[<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0
[<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560
[<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190
[<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97
[<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0
Memory state around the buggy address: ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc
^ ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
This adds the negation needed for proper finger detection on Ilitek
ili2107/ili210x. This fixes polling issues (on Amazon Kindle Fire)
caused by returning false for the cooresponding finger on the touchscreen.
If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).
Fixes: 6d597e175012 ("pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).
Fixes: e0b7d420f72a ("pNFS: Don't discard layout segments that are marked for return") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When failing the driver probe because of invalid firmware properties,
the GTDT driver unmaps the interrupt that it mapped earlier.
However, it never checks whether the mapping of the interrupt actially
succeeded. Even more, should the firmware report an illegal interrupt
number that overlaps with the GIC SGI range, this can result in an
IPI being unmapped, and subsequent fireworks (as reported by Dann
Frazier).
Rework the driver to have a slightly saner behaviour and actually
check whether the interrupt has been mapped before unmapping things.
Reported-by: dann frazier <dann.frazier@canonical.com> Fixes: ca9ae5ec4ef0 ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf Cc: <stable@vger.kernel.org> Cc: Fu Wei <wefu@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the pointer to struct dst_entry is used as pointer to struct rtable: this
turns the access to struct members like rt_mtu_locked into an OOB read in
the stack. Fix this changing the temporary variable used for IPv4 packets
in ovs_fragment(), similarly to what is done for IPv6 few lines below.
Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt") Cc: <stable@vger.kernel.org> Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each multicast route that is forwarding packets (as opposed to trapping
them) points to a list of egress router interfaces (RIFs) through which
packets are replicated.
A route's action can transition from trap to forward when a RIF is
created for one of the route's egress virtual interfaces (eVIF). When
this happens, the route's action is first updated and only later the
list of egress RIFs is committed to the device.
This results in the route pointing to an invalid list. In case the list
pointer is out of range (due to uninitialized memory), the device will
complain:
Fix this by first committing the list of egress RIFs to the device and
only later update the route's action.
Note that a fix is not needed in the reverse function (i.e.,
mlxsw_sp_mr_route_evif_unresolve()), as there the route's action is
first updated and only later the RIF is removed from the list.
Cc: stable@vger.kernel.org Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20210506072308.3834303-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is, if nat entry in checkpoint journal area is corrupted,
e.g. nid of journalled nat entry exceeds max nid value, during checkpoint,
once it tries to flush nat journal to NAT area, get_next_nat_page() may
access out-of-bounds memory on nat_bitmap due to it uses wrong nid value
as bitmap offset.
Conside the following case, it just write a big file into flash,
when complete writing, delete the file, and then power off promptly.
Next time power on, we'll get a replay list like:
...
LEB 1105:211344 len 4144 deletion 0 sqnum 428783 key type 1 inode 80
LEB 15:233544 len 160 deletion 1 sqnum 428785 key type 0 inode 80
LEB 1105:215488 len 4144 deletion 0 sqnum 428787 key type 1 inode 80
...
In the replay list, data nodes' deletion are 0, and the inode node's
deletion is 1. In current logic, the file's dentry will be removed,
but inode and the flash space it occupied will be reserved.
User will see that much free space been disappeared.
We only need to check the deletion value of the following inode type
node of the replay entry.
Fixes: e58725d51fa8 ("ubifs: Handle re-linking of inodes correctly while recovery") Cc: stable@vger.kernel.org Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When accidentally passing twice the same tag to qemu, kmemleak ended up
reporting a memory leak in virtiofs. Also, looking at the log I saw the
following error (that's when I realised the duplicated tag):
projects / users / dwmw2 / linux.git / log