====================
MAINTAINERS: spring 2025 cleanup of networking maintainers
Annual cleanup of inactive maintainers. To identify inactive maintainers
we use Jon Corbet's maintainer analysis script from gitdm, and some manual
scanning of lore.
Jakub Kicinski [Wed, 8 Jan 2025 15:52:42 +0000 (07:52 -0800)]
MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC
We have not seen emails or tags from Lars in almost 4 years.
Steen and Daniel are pretty active, but the review coverage
isn't stellar (35% of changes go in without a review tag).
Subsystem ARM/Microchip Sparx5 SoC support
Changes 28 / 79 (35%)
Last activity: 2024-11-24
Lars Povlsen <lars.povlsen@microchip.com>:
Steen Hegelund <Steen.Hegelund@microchip.com>:
Tags 6c7c4b91aa43 2024-04-08 00:00:00 15
Daniel Machon <daniel.machon@microchip.com>:
Author 48ba00da2eb4 2024-04-09 00:00:00 2
Tags f164b296638d 2024-11-24 00:00:00 6
Top reviewers:
[7]: horms@kernel.org
[1]: jacob.e.keller@intel.com
[1]: jensemil.schulzostergaard@microchip.com
[1]: horatiu.vultur@microchip.com
INACTIVE MAINTAINER Lars Povlsen <lars.povlsen@microchip.com>
Jakub Kicinski [Wed, 8 Jan 2025 15:52:41 +0000 (07:52 -0800)]
MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET
Noam Dagan was added to ENA reviewers in 2021, we have not seen
a single email from this person to any list, ever (according to lore).
Git history mentions the name in 2 SoB tags from 2020.
Jakub Kicinski [Wed, 8 Jan 2025 15:52:40 +0000 (07:52 -0800)]
MAINTAINERS: remove Ying Xue from TIPC
There is a steady stream of fixes for TIPC, even tho the development
has slowed down a lot. Over last 2 years we have merged almost 70
TIPC patches, but we haven't heard from Ying Xue once:
Jakub Kicinski [Wed, 8 Jan 2025 15:52:38 +0000 (07:52 -0800)]
MAINTAINERS: mark stmmac ethernet as an Orphan
I tried a couple of things to reinvigorate the stmmac maintainers
over the last few years but with little effect. The maintainers
are not active, let the MAINTAINERS file reflect reality.
The Synopsys IP this driver supports is very popular we need
a solid maintainer to deal with the complexity of the driver.
gitdm missingmaints says:
Subsystem STMMAC ETHERNET DRIVER
Changes 344 / 978 (35%)
Last activity: 2020-05-01
Alexandre Torgue <alexandre.torgue@foss.st.com>:
Tags 1bb694e20839 2020-05-01 00:00:00 1
Jose Abreu <joabreu@synopsys.com>:
Top reviewers:
[75]: horms@kernel.org
[49]: andrew@lunn.ch
[46]: fancer.lancer@gmail.com
INACTIVE MAINTAINER Jose Abreu <joabreu@synopsys.com>
Jakub Kicinski [Wed, 8 Jan 2025 15:52:36 +0000 (07:52 -0800)]
MAINTAINERS: update maintainers for Microchip LAN78xx
Woojung Huh seems to have only replied to the list 35 times
in the last 5 years, and didn't provide any reviews in 3 years.
The LAN78XX driver has seen quite a bit of activity lately.
gitdm missingmaints says:
Subsystem USB LAN78XX ETHERNET DRIVER
Changes 35 / 91 (38%)
(No activity)
Top reviewers:
[23]: andrew@lunn.ch
[3]: horms@kernel.org
[2]: mateusz.polchlopek@intel.com
INACTIVE MAINTAINER Woojung Huh <woojung.huh@microchip.com>
Move Woojung to CREDITS and add new maintainers who are more
likely to review LAN78xx patches.
Jakub Kicinski [Wed, 8 Jan 2025 15:52:35 +0000 (07:52 -0800)]
MAINTAINERS: mark Synopsys DW XPCS as Orphan
There's not much review support from Jose, there is a sharp
drop in his participation around 4 years ago.
The DW XPCS IP is very popular and the driver requires active
maintenance.
gitdm missingmaints says:
Subsystem SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER
Changes 33 / 94 (35%)
(No activity)
Top reviewers:
[16]: andrew@lunn.ch
[12]: vladimir.oltean@nxp.com
[2]: f.fainelli@gmail.com
INACTIVE MAINTAINER Jose Abreu <Jose.Abreu@synopsys.com>
Chenguang Zhao [Wed, 8 Jan 2025 03:00:09 +0000 (11:00 +0800)]
net/mlx5: Fix variable not being completed when function returns
When cmd_alloc_index(), fails cmd_work_handler() needs
to complete ent->slotted before returning early.
Otherwise the task which issued the command may hang:
mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry
INFO: task kworker/13:2:4055883 blocked for more than 120 seconds.
Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/13:2 D 0 4055883 2 0x00000228
Workqueue: events mlx5e_tx_dim_work [mlx5_core]
Call trace:
__switch_to+0xe8/0x150
__schedule+0x2a8/0x9b8
schedule+0x2c/0x88
schedule_timeout+0x204/0x478
wait_for_common+0x154/0x250
wait_for_completion+0x28/0x38
cmd_exec+0x7a0/0xa00 [mlx5_core]
mlx5_cmd_exec+0x54/0x80 [mlx5_core]
mlx5_core_modify_cq+0x6c/0x80 [mlx5_core]
mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core]
mlx5e_tx_dim_work+0x54/0x68 [mlx5_core]
process_one_work+0x1b0/0x448
worker_thread+0x54/0x468
kthread+0x134/0x138
ret_from_fork+0x10/0x18
Fixes: 485d65e13571 ("net/mlx5: Add a timeout to acquire the command queue semaphore") Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250108030009.68520-1-zhaochenguang@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Wed, 8 Jan 2025 09:15:53 +0000 (12:15 +0300)]
rtase: Fix a check for error in rtase_alloc_msix()
The pci_irq_vector() function never returns zero. It returns negative
error codes or a positive non-zero IRQ number. Fix the error checking to
test for negatives.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parker Newman [Tue, 7 Jan 2025 21:24:59 +0000 (16:24 -0500)]
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be
written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers.
This causes softirq time outs and kernel panics when using controllers
other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
This bug has existed since the dwmac-tegra driver was added in Dec 2022
(See Fixes tag below for commit hash).
The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit
only uses MGBE0 which is why the bug was not found previously. Connect Tech
has many products that use 2 (or more) MGBE controllers.
The solution is to read the controller's SID from the existing "iommus"
device tree property. The 2nd field of the "iommus" device tree property
is the controller's SID.
Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property:
Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in
the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the
SID using the tegra_dev_iommu_get_stream_id() helper function found in
linux/iommu.h.
Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus"
property is removed from the device tree or the IOMMU is disabled.
While the Tegra234 SOC technically supports bypassing the IOMMU, it is not
supported by the current firmware, has not been tested and not recommended.
More detailed discussion with Thierry Reding from Nvidia linked below.
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07e3 ("sched: sch_cake: fix bulk flow accounting logic for host fairness") Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Dave Taht <dave.taht@gmail.com> Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leo Yang [Tue, 7 Jan 2025 03:15:30 +0000 (11:15 +0800)]
mctp i3c: fix MCTP I3C driver multi-thread issue
We found a timeout problem with the pldm command on our system. The
reason is that the MCTP-I3C driver has a race condition when receiving
multiple-packet messages in multi-thread, resulting in a wrong packet
order problem.
We identified this problem by adding a debug message to the
mctp_i3c_read function.
According to the MCTP spec, a multiple-packet message must be composed
in sequence, and if there is a wrong sequence, the whole message will be
discarded and wait for the next SOM.
For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM.
Therefore, we try to solve this problem by adding a mutex to the
mctp_i3c_read function. Before the modification, when a command
requesting a multiple-packet message response is sent consecutively, an
error usually occurs within 100 loops. After the mutex, it can go
through 40000 loops without any error, and it seems to run well.
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Signed-off-by: Leo Yang <Leo-Yang@quantatw.com> Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com
[pabeni@redhat.com: dropped already answered question from changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kory Maincent [Tue, 7 Jan 2025 14:26:59 +0000 (15:26 +0100)]
dt-bindings: net: pse-pd: Fix unusual character in documentation
The documentation contained an unusual character due to an issue in my
personal b4 setup. Fix the problem by providing the correct PSE Pinout
Alternatives table number description.
Jakub Kicinski [Thu, 9 Jan 2025 03:33:26 +0000 (19:33 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-07 (ice, igc)
For ice:
Arkadiusz corrects mask value being used to determine DPLL phase range.
Przemyslaw corrects frequency value for E823 devices.
For igc:
En-Wei Wu adds a check and, early, return for failed register read.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: return early when failing to read EECD register
ice: fix incorrect PHY settings for 100 GB/s
ice: fix max values for dpll pin phase adjust
====================
Jakub Kicinski [Thu, 9 Jan 2025 03:08:18 +0000 (19:08 -0800)]
Merge tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtk: Fix failed to send func ctrl for MediaTek devices.
- hci_sync: Fix not setting Random Address when required
- MGMT: Fix Add Device to responding before completing
- btnxpuart: Fix driver sending truncated data
* tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Bluetooth: btnxpuart: Fix driver sending truncated data
Bluetooth: MGMT: Fix Add Device to responding before completing
Bluetooth: hci_sync: Fix not setting Random Address when required
====================
====================
There are some bugfix for the HNS3 ethernet driver
There's a series of bugfix that's been accepted:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=d80a3091308491455b6501b1c4b68698c4a7cd24
However, The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds. After discussion, the series was reverted:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=249cfa318fb1b77eb726c2ff4f74c9685f04e568
But only two patches are related to the IOMMU.
Other patches involve only the modification of the driver.
This series resends other patches.
Jie Wang [Mon, 6 Jan 2025 14:36:42 +0000 (22:36 +0800)]
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Lan [Mon, 6 Jan 2025 14:36:41 +0000 (22:36 +0800)]
net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jian Shen [Mon, 6 Jan 2025 14:36:40 +0000 (22:36 +0800)]
net: hns3: initialize reset_timer before hclgevf_misc_irq_init()
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jian Shen [Mon, 6 Jan 2025 14:36:39 +0000 (22:36 +0800)]
net: hns3: don't auto enable misc vector
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
Hao Lan [Mon, 6 Jan 2025 14:36:38 +0000 (22:36 +0800)]
net: hns3: Resolved the issue that the debugfs query result is inconsistent.
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Lan [Mon, 6 Jan 2025 14:36:37 +0000 (22:36 +0800)]
net: hns3: fix missing features due to dev->features configuration too early
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Lan [Mon, 6 Jan 2025 14:36:36 +0000 (22:36 +0800)]
net: hns3: fixed reset failure issues caused by the incorrect reset type
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
Daniel Borkmann [Tue, 7 Jan 2025 10:14:39 +0000 (11:14 +0100)]
tcp: Annotate data-race around sk->sk_mark in tcp_v4_send_reset
This is a follow-up to 3c5b4d69c358 ("net: annotate data-races around
sk->sk_mark"). sk->sk_mark can be read and written without holding
the socket lock. IPv6 equivalent is already covered with READ_ONCE()
annotation in tcp_v6_send_response().
Jakub Kicinski [Mon, 6 Jan 2025 18:01:36 +0000 (10:01 -0800)]
netdev: prevent accessing NAPI instances from another namespace
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org Fixes: 1287c1ae0fc2 ("netdev-genl: Support setting per-NAPI config values") Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi") Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Lu [Wed, 8 Jan 2025 09:50:28 +0000 (17:50 +0800)]
Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3ca ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Neeraj Sanjay Kale [Fri, 20 Dec 2024 13:02:52 +0000 (18:32 +0530)]
Bluetooth: btnxpuart: Fix driver sending truncated data
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Mon, 25 Nov 2024 20:42:10 +0000 (15:42 -0500)]
Bluetooth: MGMT: Fix Add Device to responding before completing
Add Device with LE type requires updating resolving/accept list which
requires quite a number of commands to complete and each of them may
fail, so instead of pretending it would always work this checks the
return of hci_update_passive_scan_sync which indicates if everything
worked as intended.
Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Mon, 25 Nov 2024 20:42:09 +0000 (15:42 -0500)]
Bluetooth: hci_sync: Fix not setting Random Address when required
This fixes errors such as the following when Own address type is set to
Random Address but it has not been programmed yet due to either be
advertising or connecting:
< HCI Command: LE Set Exte.. (0x08|0x0041) plen 13
Own address type: Random (0x03)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x05
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Entry 1: LE Coded
Type: Passive (0x00)
Interval: 180.000 msec (0x0120)
Window: 90.000 msec (0x0090)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Fixes: c45074d68a9b ("Bluetooth: Fix not generating RPA when required") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jakub Kicinski [Mon, 6 Jan 2025 18:02:10 +0000 (10:02 -0800)]
eth: gve: use appropriate helper to set xdp_features
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") Reviewed-By: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 6 Jan 2025 07:19:11 +0000 (16:19 +0900)]
ipvlan: Fix use-after-free in ipvlan_get_iflink().
syzbot presented an use-after-free report [0] regarding ipvlan and
linkwatch.
ipvlan does not hold a refcnt of the lower device unlike vlan and
macvlan.
If the linkwatch work is triggered for the ipvlan dev, the lower dev
might have already been freed, resulting in UAF of ipvlan->phy_dev in
ipvlan_get_iflink().
We can delay the lower dev unregistration like vlan and macvlan by
holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and
releasing it in dev->priv_destructor().
Jakub pointed out calling .ndo_XXX after unregister_netdevice() has
returned is error prone and suggested [1] addressing this UAF in the
core by taking commit 750e51603395 ("net: avoid potential UAF in
default_operstate()") further.
Let's assume unregistering devices DOWN and use RCU protection in
default_operstate() not to race with the device unregistration.
[0]:
BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353
Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944
The buggy address belongs to the object at ffff0000d768c000
which belongs to the cache kmalloc-cg-4k of size 4096
The buggy address is located 224 bytes inside of
freed 4096-byte region [ffff0000d768c000, ffff0000d768d000)
Memory state around the buggy address: ffff0000d768bf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff0000d768c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff0000d768c080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff0000d768c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000d768c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Benjamin Coddington [Sat, 4 Jan 2025 15:29:45 +0000 (10:29 -0500)]
tls: Fix tls_sw_sendmsg error handling
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Su Hui [Mon, 6 Jan 2025 02:36:48 +0000 (10:36 +0800)]
eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"
There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl'
is uninitialized which makes 'sensor' and '*val' to be stored garbage
value. Revert commit d85ebade02e8 ("eth: fbnic: Add hardware monitoring
support via HWMON interface") to avoid this problem.
Fixes: d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface") Signed-off-by: Su Hui <suhui@nfschina.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
En-Wei Wu [Wed, 18 Dec 2024 02:37:42 +0000 (10:37 +0800)]
igc: return early when failing to read EECD register
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Przemyslaw Korba [Wed, 4 Dec 2024 13:22:18 +0000 (14:22 +0100)]
ice: fix incorrect PHY settings for 100 GB/s
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Arkadiusz Kubalewski [Wed, 20 Nov 2024 07:51:12 +0000 (08:51 +0100)]
ice: fix max values for dpll pin phase adjust
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.
Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.
Jakub Kicinski [Fri, 3 Jan 2025 18:32:07 +0000 (10:32 -0800)]
net: don't dump Tx and uninitialized NAPIs
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base") Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 7 Jan 2025 00:40:28 +0000 (16:40 -0800)]
Merge branch 'bnxt_en-2-bug-fixes'
Michael Chan says:
====================
bnxt_en: 2 Bug fixes
The first patch fixes a potential memory leak when sending a FW
message for the RoCE driver. The second patch fixes the potential
issue of DIM modifying the coalescing parameters of a ring that has
been freed.
====================
Michael Chan [Sat, 4 Jan 2025 04:38:48 +0000 (20:38 -0800)]
bnxt_en: Fix DIM shutdown
DIM work will call the firmware to adjust the coalescing parameters on
the RX rings. We should cancel DIM work before we call the firmware
to free the RX rings. Otherwise, FW will reject the call from DIM
work if the RX ring has been freed. This will generate an error
message like this:
and cause unnecessary concern for the user. It is also possible to
modify the coalescing parameters of the wrong ring if the ring has
been re-allocated.
To prevent this, cancel DIM work right before freeing the RX rings.
We also have to add a check in NAPI poll to not schedule DIM if the
RX rings are shutting down. Check that the VNIC is active before we
schedule DIM. The VNIC is always disabled before we free the RX rings.
Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalesh AP [Sat, 4 Jan 2025 04:38:47 +0000 (20:38 -0800)]
bnxt_en: Fix possible memory leak when hwrm_req_replace fails
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop()
which could cause a memory leak.
Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Fri, 3 Jan 2025 19:51:47 +0000 (11:51 -0800)]
pds_core: limit loop over fw name list
Add an array size limit to the for-loop to be sure we don't try
to reference a fw_version string off the end of the fw info names
array. We know that our firmware only has a limited number
of firmware slot names, but we shouldn't leave this unchecked.
Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250103195147.7408-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiawen Wu [Fri, 3 Jan 2025 08:10:13 +0000 (16:10 +0800)]
net: libwx: fix firmware mailbox abnormal return
The existing SW-FW interaction flow on the driver is wrong. Follow this
wrong flow, driver would never return error if there is a unknown command.
Since firmware writes back 'firmware ready' and 'unknown command' in the
mailbox message if there is an unknown command sent by driver. So reading
'firmware ready' does not timeout. Then driver would mistakenly believe
that the interaction has completed successfully.
It tends to happen with the use of custom firmware. Move the check for
'unknown command' out of the poll timeout for 'firmware ready'. And adjust
the debug log so that mailbox messages are always printed when commands
timeout.
Jakub Kicinski [Sun, 5 Jan 2025 01:00:43 +0000 (17:00 -0800)]
Merge tag 'ieee802154-for-net-2025-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2025-01-03
Keisuke Nishimura provided a fix to check for kfifo_alloc() in the ca8210
driver.
Lizhi Xu provided a fix a corrupted list, found by syzkaller, by checking local
interfaces first.
* tag 'ieee802154-for-net-2025-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
mac802154: check local interfaces before deleting sdata list
ieee802154: ca8210: Add missing check for kfifo_alloc() in ca8210_probe()
====================
Jakub Kicinski [Fri, 3 Jan 2025 18:24:58 +0000 (10:24 -0800)]
selftests: tc-testing: reduce rshift value
After previous change rshift >= 32 is no longer allowed.
Modify the test to use 31, the test doesn't seem to send
any traffic so the exact value shouldn't matter.
Zhongqiu Duan [Thu, 2 Jan 2025 17:14:26 +0000 (17:14 +0000)]
tcp/dccp: allow a connection when sk_max_ack_backlog is zero
If the backlog of listen() is set to zero, sk_acceptq_is_full() allows
one connection to be made, but inet_csk_reqsk_queue_is_full() does not.
When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full()
will cause an immediate drop before the sk_acceptq_is_full() check in
tcp_conn_request(), resulting in no connection can be made.
This patch tries to keep consistent with 64a146513f8f ("[NET]: Revert
incorrect accept queue backlog changes.").
Antonio Pastor [Fri, 3 Jan 2025 01:23:00 +0000 (20:23 -0500)]
net: 802: LLC+SNAP OID:PID lookup on start of skb data
802.2+LLC+SNAP frames received by napi_complete_done() with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. This was an issue as snap_rcv()
expected offset to point to SNAP header (OID:PID), causing packet to
be dropped.
A fix at llc_fixup_skb() (a024e377efed) resets transport_header for any
LLC consumers that may care about it, and stops SNAP packets from being
dropped, but doesn't fix the problem which is that LLC and SNAP should
not use transport_header offset.
Ths patch eliminates the use of transport_header offset for SNAP lookup
of OID:PID so that SNAP does not rely on the offset at all.
The offset is reset after pull for any SNAP packet consumers that may
(but shouldn't) use it.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()") Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250103012303.746521-1-antonio.pastor@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 3 Jan 2025 22:36:54 +0000 (14:36 -0800)]
Merge tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
Linus Torvalds [Fri, 3 Jan 2025 19:09:35 +0000 (11:09 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
Linus Torvalds [Fri, 3 Jan 2025 18:57:57 +0000 (10:57 -0800)]
Merge tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A small Kconfig fixup for the i.MX.
In principle this could come in from the SoC tree but the bug was
introduced from the pin control tree so let's fix it from here.
- Fix a sleep in atomic context in the MCP23xxx GPIO expander by
disabling the regmap locking and using explicit mutex locks.
* tag 'pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking
ARM: imx: Re-introduce the PINCTRL selection
Linus Torvalds [Fri, 3 Jan 2025 18:54:51 +0000 (10:54 -0800)]
Merge tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The first new year pull request: no surprises, all small fixes,
including:
- Follow-up fixes for the new compress-offload API extension
- A couple of fixes for MIDI 2.0 UMP handling
- A trivial race fix for OSS sequencer emulation ioctls
- USB-audio and HD-audio fixes / quirks"
* tag 'sound-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Check UMP support for midi_version change
ALSA hda/realtek: Add quirk for Framework F111:000C
Revert "ALSA: ump: Don't enumeration invalid groups for legacy rawmidi"
ALSA: seq: oss: Fix races at processing SysEx messages
ALSA: compress_offload: fix remaining descriptor races in sound/core/compress_offload.c
ALSA: compress_offload: Drop unneeded no_free_ptr()
ALSA: hda/tas2781: Ignore SUBSYS_ID not found for tas2563 projects
ALSA: usb-audio: US16x08: Initialize array before use
Linus Torvalds [Fri, 3 Jan 2025 18:06:44 +0000 (10:06 -0800)]
Merge tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Happy New Year.
It was fairly quiet for holidays period, certainly nothing that worth
getting off the couch before I needed to, this is for the past two
weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc
happening next week, but otherwise all quiet.
xe:
- uapi: Revert some devcoredump file format changes breaking a mesa
debug tool
- Fixes around waits when moving to system
- Fix a typo when checking for LMEM provisioning
- Fix a fault on fd close after unbind
- A couple of OA fixes squashed for stable backporting
adv7511:
- fix UAF
- drop single lane support
- audio infoframe fix"
* tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel:
xe/oa: Fix query mode of operation for OAR/OAC
drm/i915/dg1: Fix power gate sequence.
drm/i915/cx0_phy: Fix C10 pll programming sequence
drm/xe: Fix fault on fd close after unbind
drm/xe/pf: Use correct function to check LMEM provisioning
drm/xe: Wait for migration job before unmapping pages
drm/xe: Use non-interruptible wait when moving BO to system
drm/xe: Revert some changes that break a mesa debug tool
drm: adv7511: Drop dsi single lane support
dt-bindings: display: adi,adv7533: Drop single lane support
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
drm/bridge: adv7511_audio: Update Audio InfoFrame properly
Linus Torvalds [Fri, 3 Jan 2025 18:04:43 +0000 (10:04 -0800)]
Merge tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Add needed READ_ONCE() around access to the fgraph array element
The updates to the fgraph array can happen when callbacks are
registered and unregistered. The __ftrace_return_to_handler() can
handle reading either the old value or the new value. But once it
reads that value it must stay consistent otherwise the check that
looks to see if the value is a stub may show false, but if the
compiler decides to re-read after that check, it can be true which
can cause the code to crash later on.
- Make function profiler use the top level ops for filtering again
When function graph became available for instances, its filter ops
became independent from the top level set_ftrace_filter. In the
process the function profiler received its own filter ops as well.
But the function profiler uses the top level set_ftrace_filter file
and does not have one of its own. In giving it its own filter ops, it
lost any user interface it once had. Make it use the top level
set_ftrace_filter file again. This fixes a regression.
* tag 'ftrace-v6.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix function profiler's filtering functionality
fgraph: Add READ_ONCE() when accessing fgraph_array[]
Mark Zhang [Thu, 19 Dec 2024 12:23:36 +0000 (14:23 +0200)]
RDMA/mlx5: Enable multiplane mode only when it is supported
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port") Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org Cc: stable@vger.kernel.org Reported-by: Francesco Poli <invernomuto@paranoici.org> Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/ Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
David S. Miller [Fri, 3 Jan 2025 11:54:06 +0000 (11:54 +0000)]
Merge branch 'net-iep-clock-module-fixes'
Meghana Malladi says:
====================
IEP clock module bug fixes
This series has some bug fixes for IEP module needed by PPS and
timesync operations.
Patch 1/2 fixes firmware load sequence to run all the firmwares
when either of the ethernet interfaces is up. Move all the code
common for firmware bringup under common functions.
Patch 2/2 fixes distorted PPS signal when the ethernet interfaces
are brough down and up. This patch also fixes enabling PPS signal
after bringing the interface up, without disabling PPS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Meghana Malladi [Mon, 23 Dec 2024 15:15:50 +0000 (20:45 +0530)]
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
When ICSSG interfaces are brought down and brought up again, the
pru cores are shut down and booted again, flushing out all the memories
and start again in a clean state. Hence it is expected that the
IEP_CMP_CFG register needs to be flushed during iep_init() to ensure
that the existing residual configuration doesn't cause any unusual
behavior. If the register is not cleared, existing IEP_CMP_CFG set for
CMP1 will result in SYNC0_OUT signal based on the SYNC_OUT register values.
After bringing the interface up, calling PPS enable doesn't work as
the driver believes PPS is already enabled, (iep->pps_enabled is not
cleared during interface bring down) and driver will just return true
even though there is no signal. Fix this by disabling pps and perout.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
and SLICE1. Currently whenever any ICSSG interface comes up we load the
respective firmwares to PRU cores and whenever interface goes down, we
stop the resective cores. Due to this, when SLICE0 goes down while
SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
stopped. This results in clock jump for SLICE1 interface as the timesync
related operations are no longer running.
As there are interdependencies between SLICE0 and SLICE1 firmwares,
fix this by running both PRU0 and PRU1 firmwares as long as at least 1
ICSSG interface is up. Add new flag in prueth struct to check if all
firmwares are running and remove the old flag (fw_running).
Use emacs_initialized as reference count to load the firmwares for the
first and last interface up/down. Moving init_emac_mode and fw_offload_mode
API outside of icssg_config to icssg_common_start API as they need
to be called only once per firmware boot.
Change prueth_emac_restart() to return error code and add error prints
inside the caller of this functions in case of any failures.
Move prueth_emac_stop() from common to sr1 driver.
sr1 and sr2 drivers have different logic handling for stopping
the firmwares. While sr1 driver is dependent on emac structure
to stop the corresponding pru cores for that slice, for sr2
all the pru cores of both the slices are stopped and is not
dependent on emac. So the prueth_emac_stop() function is no
longer common and can be moved to sr1 driver.
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Signed-off-by: Meghana Malladi <m-malladi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Jan 2025 02:44:05 +0000 (18:44 -0800)]
Merge branch 'mptcp-rx-path-fixes'
Matthieu Baerts says:
====================
mptcp: rx path fixes
Here are 3 different fixes, all related to the MPTCP receive buffer:
- Patch 1: fix receive buffer space when recvmsg() blocks after
receiving some data. For a fix introduced in v6.12, backported to
v6.1.
- Patch 2: mptcp_cleanup_rbuf() can be called when no data has been
copied. For 5.11.
- Patch 3: prevent excessive coalescing on receive, which can affect the
throughput badly. It looks better to wait a bit before backporting
this one to stable versions, to get more results. For 5.10.
====================
Paolo Abeni [Mon, 30 Dec 2024 18:12:32 +0000 (19:12 +0100)]
mptcp: prevent excessive coalescing on receive
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d19 ("mptcp: introduce and use mptcp_try_coalesce()") Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 30 Dec 2024 18:12:31 +0000 (19:12 +0100)]
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
Under some corner cases the MPTCP protocol can end-up invoking
mptcp_cleanup_rbuf() when no data has been copied, but such helper
assumes the opposite condition.
Explicitly drop such assumption and performs the costly call only
when strictly needed - before releasing the msk socket lock.
Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-2-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 30 Dec 2024 18:12:30 +0000 (19:12 +0100)]
mptcp: fix recvbuffer adjust on sleeping rcvmsg
If the recvmsg() blocks after receiving some data - i.e. due to
SO_RCVLOWAT - the MPTCP code will attempt multiple times to
adjust the receive buffer size, wrongly accounting every time the
cumulative of received data - instead of accounting only for the
delta.
Address the issue moving mptcp_rcv_space_adjust just after the
data reception and passing it only the just received bytes.
This also removes an unneeded difference between the TCP and MPTCP
RX code path implementation.
Fixes: 581302298524 ("mptcp: error out earlier on disconnect") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-1-8608af434ceb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 30 Dec 2024 16:28:49 +0000 (16:28 +0000)]
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
Maciej S. Szmigiero [Sun, 29 Dec 2024 16:46:58 +0000 (17:46 +0100)]
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
ipc_mmio_init() used the post-decrement operator in its loop continuing
condition of "retries" counter being "> 0", which meant that when this
condition caused loop exit "retries" counter reached -1.
But the later valid exec stage failure check only tests for "retries"
counter being exactly zero, so it didn't trigger in this case (but
would wrongly trigger if the code reaches a valid exec stage in the
very last loop iteration).
Fix this by using the pre-decrement operator instead, so the loop counter
is exactly zero on valid exec stage failure.
Fixes: 8c7138b33e5c ("net: Unpublish sk from sk_reuseport_cb before call_rcu") Reported-by: syzbot+b3e02953598f447d4d2a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6772f2f4.050a0220.2f3838.04cb.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241231160527.3994168-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn [Wed, 1 Jan 2025 16:47:40 +0000 (11:47 -0500)]
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
The blamed commit disabled hardware offoad of IPv6 packets with
extension headers on devices that advertise NETIF_F_IPV6_CSUM,
based on the definition of that feature in skbuff.h:
* * - %NETIF_F_IPV6_CSUM
* - Driver (device) is only able to checksum plain
* TCP or UDP packets over IPv6. These are specifically
* unencapsulated packets of the form IPv6|TCP or
* IPv6|UDP where the Next Header field in the IPv6
* header is either TCP or UDP. IPv6 extension headers
* are not supported with this feature. This feature
* cannot be set in features for a device with
* NETIF_F_HW_CSUM also set. This feature is being
* DEPRECATED (see below).
The change causes skb_warn_bad_offload to fire for BIG TCP
packets.
[ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0
BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to
communicate packet length, as this is an IPv6 jumbogram. But, the
feature is only enabled on devices that support BIG TCP TSO. The
header is only present for PF_PACKET taps like tcpdump, and not
transmitted by physical devices.
For this specific case of extension headers that are not
transmitted, return to the situation before the blamed commit
and support hardware offload.
ipv6_has_hopopt_jumbo() tests not only whether this header is present,
but also that it is the only extension header before a terminal (L4)
header.
Fixes: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Closes: https://lore.kernel.org/netdev/CANn89iK1hdC3Nt8KPhOtTF8vCPc1AHDCtse_BTNki1pWxAByTQ@mail.gmail.com/ Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250101164909.1331680-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Liang Jie [Mon, 30 Dec 2024 09:37:09 +0000 (17:37 +0800)]
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
In efx_tc_ct_zone_ht_params, the key_len was previously set to
offsetof(struct efx_tc_ct_zone, linkage). This calculation is incorrect
because it includes any padding between the zone field and the linkage
field due to structure alignment, which can vary between systems.
This patch updates key_len to use sizeof_field(struct efx_tc_ct_zone, zone)
, ensuring that the hash table correctly uses the zone as the key. This fix
prevents potential hash lookup errors and improves connection tracking
reliability.
Fixes: c3bb5c6acd4e ("sfc: functions to register for conntrack zone offload") Signed-off-by: Liang Jie <liangjie@lixiang.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241230093709.3226854-1-buaajxlj@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie [Fri, 3 Jan 2025 00:28:43 +0000 (10:28 +1000)]
Merge tag 'drm-xe-fixes-2024-12-23' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Revert some devcoredump file format changes
breaking a mesa debug tool (John)
Driver Changes:
- Fixes around waits when moving to system (Nirmoy)
- Fix a typo when checking for LMEM provisioning (Michal)
- Fix a fault on fd close after unbind (Lucas)
Kohei Enju [Wed, 1 Jan 2025 19:08:20 +0000 (04:08 +0900)]
ftrace: Fix function profiler's filtering functionality
Commit c132be2c4fcc ("function_graph: Have the instances use their own
ftrace_ops for filtering"), function profiler (enabled via
function_profile_enabled) has been showing statistics for all functions,
ignoring set_ftrace_filter settings.
While tracers are instantiated, the function profiler is not. Therefore, it
should use the global set_ftrace_filter for consistency. This patch
modifies the function profiler to use the global filter, fixing the
filtering functionality.
Before (filtering not working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
schedule 314 22290594 us 70989.15 us 40372231 us
x64_sys_call 1527 8762510 us 5738.382 us 3414354 us
schedule_hrtimeout_range 176 8665356 us 49234.98 us 405618876 us
__x64_sys_ppoll 324 5656635 us 17458.75 us 19203976 us
do_sys_poll 324 5653747 us 17449.83 us 19214945 us
schedule_timeout 67 5531396 us 82558.15 us 2136740827 us
__x64_sys_pselect6 12 3029540 us 252461.7 us 63296940171 us
do_pselect.constprop.0 12 3029532 us 252461.0 us 63296952931 us
```
After (filtering working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
vfs_write 462 68476.43 us 148.217 us
25874.48 us
vfs_read 641 9611.356 us 14.994 us
28868.07 us
vfs_fstat 890 878.094 us 0.986 us
1.667 us
vfs_fstatat 227 757.176 us 3.335 us
18.928 us
vfs_statx 226 610.610 us 2.701 us
17.749 us
vfs_getattr_nosec 1187 460.919 us 0.388 us
0.326 us
vfs_statx_path 297 343.287 us 1.155 us
11.116 us
vfs_rename 6 291.575 us 48.595 us
9889.236 us
```
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250101190820.72534-1-enjuk@amazon.com Fixes: c132be2c4fcc ("function_graph: Have the instances use their own ftrace_ops for filtering") Signed-off-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Zilin Guan [Tue, 31 Dec 2024 11:37:31 +0000 (11:37 +0000)]
fgraph: Add READ_ONCE() when accessing fgraph_array[]
In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[]
elements, which are fgraph_ops. The loop checks if an element is a
fgraph_stub to prevent using a fgraph_stub afterward.
However, if the compiler reloads fgraph_array[] after this check, it might
race with an update to fgraph_array[] that introduces a fgraph_stub. This
could result in the stub being processed, but the stub contains a null
"func_hash" field, leading to a NULL pointer dereference.
To ensure that the gops compared against the fgraph_stub matches the gops
processed later, add a READ_ONCE(). A similar patch appears in commit 63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]").
Cc: stable@vger.kernel.org Fixes: 37238abe3cb47 ("ftrace/function_graph: Pass fgraph_ops to function graph callbacks") Link: https://lore.kernel.org/20241231113731.277668-1-zilin@seu.edu.cn Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Olof Johansson [Thu, 2 Jan 2025 14:30:03 +0000 (06:30 -0800)]
MAINTAINERS: Remove Olof from SoC maintainers
I haven't been an active participant for a couple of years now, and
after discussions at Linux Plumbers in 2024, Arnd is getting fresh help
from a few more participants.
It's time to remove myself, and spare myself from patches and pull
requests in my inbox.
Linus Torvalds [Thu, 2 Jan 2025 18:40:40 +0000 (10:40 -0800)]
Merge tag 'pmdomain-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- Silence warning by adding a dummy release function
- imx: Fix an OF node reference leak in imx_gpcv2_probe()
* tag 'pmdomain-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: add dummy release function to genpd device
pmdomain: imx: gpcv2: fix an OF node reference leak in imx_gpcv2_probe()
This is a set of squashed commits to facilitate smooth applying to
stable. Each commit message is retained for reference.
1) Allow a GGTT mapped batch to be submitted to user exec queue
For a OA use case, one of the HW registers needs to be modified by
submitting an MI_LOAD_REGISTER_IMM command to the users exec queue, so
that the register is modified in the user's hardware context. In order
to do this a batch that is mapped in GGTT, needs to be submitted to the
user exec queue. Since all user submissions use q->vm and hence PPGTT,
add some plumbing to enable submission of batches mapped in GGTT.
v2: ggtt is zero-initialized, so no need to set it false (Matt Brost)
2) xe/oa: Use MI_LOAD_REGISTER_IMMEDIATE to enable OAR/OAC
To enable OAR/OAC, a bit in RING_CONTEXT_CONTROL needs to be set.
Setting this bit cause the context image size to change and if not done
correct, can cause undesired hangs.
Current code uses a separate exec_queue to modify this bit and is
error-prone. As per HW recommendation, submit MI_LOAD_REGISTER_IMM to
the target hardware context to modify the relevant bit.
In v2 version, an attempt to submit everything to the user-queue was
made, but it failed the unprivileged-single-ctx-counters test. It
appears that the OACTXCONTROL must be modified from a remote context.
In v3 version, all context specific register configurations were moved
to use LOAD_REGISTER_IMMEDIATE and that seems to work well. This is a
cleaner way, since we can now submit all configuration to user
exec_queue and the fence handling is simplified.
v2:
(Matt)
- set job->ggtt to true if create job is successful
- unlock vm on job error
(Ashutosh)
- don't wait on job submission
- use kernel exec queue where possible
v3:
(Ashutosh)
- Fix checkpatch issues
- Remove extra spaces/new-lines
- Add Fixes: and Cc: tags
- Reset context control bit when OA stream is closed
- Submit all config via MI_LOAD_REGISTER_IMMEDIATE
(Umesh)
- Update commit message for v3 experiment
- Squash patches for easier port to stable
v4:
(Ashutosh)
- No need to pass q to xe_oa_submit_bb
- Do not support exec queues with width > 1
- Fix disabling of CTX_CTRL_OAC_CONTEXT_ENABLE
v5:
(Ashutosh)
- Drop reg_lri related comments
- Use XE_OA_SUBMIT_NO_DEPS in xe_oa_load_with_lri
Fixes: 8135f1c09dd2 ("drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> # commit 1 Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220171919.571528-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 55039832f98c7e05f1cf9e0d8c12b2490abd0f16) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Linus Torvalds [Wed, 1 Jan 2025 19:22:07 +0000 (11:22 -0800)]
Merge tag 'trace-v6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix trace event string check when dealing with array of strings
The xe_bo_move event has a field that indexes into an array of
strings. The TP_fast_assign() added the index into the ring buffer and
the TP_printk() had a "%s" that referenced the array using the index
in the ring buffer. This is a legitimate use of "%s" in trace events.
But this triggered a false positive in the test_event_printk() at boot
saying that the string was dangerous.
Change the check to allow arrays using fields in the ring buffer as an
index to be considered a safe string"
* tag 'trace-v6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have process_string() also allow arrays
Takashi Iwai [Tue, 31 Dec 2024 14:53:58 +0000 (15:53 +0100)]
ALSA: seq: Check UMP support for midi_version change
When the kernel is built without UMP support but a user-space app
requires the midi_version > 0, the kernel should return an error.
Otherwise user-space assumes as if it were possible to deal,
eventually hitting serious errors later.
Kalesh AP [Tue, 31 Dec 2024 02:50:08 +0000 (08:20 +0530)]
RDMA/bnxt_re: Fix error recovery sequence
Fixed to return ENXIO from __send_message_basic_sanity()
to indicate that device is in error state. In the case of
ERR_DEVICE_DETACHED state, the driver should not post the
commands to the firmware as it will time out eventually.
Removed bnxt_re_modify_qp() call from bnxt_re_dev_stop()
as it is a no-op.
Fixes: cc5b9b48d447 ("RDMA/bnxt_re: Recover the device when FW error is detected") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Link: https://patch.msgid.link/20241231025008.2267162-1-kalesh-anakkur.purayil@broadcom.com Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Li Zhijian [Tue, 31 Dec 2024 01:34:16 +0000 (09:34 +0800)]
RDMA/rtrs: Ensure 'ib_sge list' is accessible
Move the declaration of the 'ib_sge list' variable outside the
'always_invalidate' block to ensure it remains accessible for use
throughout the function.
Previously, 'ib_sge list' was declared within the 'always_invalidate'
block, limiting its accessibility, then caused a
'BUG: kernel NULL pointer dereference'[1].
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2d0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? memcpy_orig+0xd5/0x140
rxe_mr_copy+0x1c3/0x200 [rdma_rxe]
? rxe_pool_get_index+0x4b/0x80 [rdma_rxe]
copy_data+0xa5/0x230 [rdma_rxe]
rxe_requester+0xd9b/0xf70 [rdma_rxe]
? finish_task_switch.isra.0+0x99/0x2e0
rxe_sender+0x13/0x40 [rdma_rxe]
do_task+0x68/0x1e0 [rdma_rxe]
process_one_work+0x177/0x330
worker_thread+0x252/0x390
? __pfx_worker_thread+0x10/0x10
This change ensures the variable is available for subsequent operations
that require it.
Daniel Schaefer [Tue, 31 Dec 2024 04:59:58 +0000 (12:59 +0800)]
ALSA hda/realtek: Add quirk for Framework F111:000C
Similar to commit eb91c456f371
("ALSA: hda/realtek: Add Framework Laptop 13 (Intel Core Ultra) to quirks")
and previous quirks for Framework systems with
Realtek codecs.
000C is a new platform that will also have an ALC285 codec and needs the
same quirk.
Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: linux@frame.work Cc: Dustin L. Howett <dustin@howett.net> Signed-off-by: Daniel Schaefer <dhs@frame.work> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241231045958.14545-1-dhs@frame.work Signed-off-by: Takashi Iwai <tiwai@suse.de>
Steven Rostedt [Tue, 31 Dec 2024 05:06:46 +0000 (00:06 -0500)]
tracing: Have process_string() also allow arrays
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe.
Jinjian Song [Tue, 24 Dec 2024 04:15:52 +0000 (12:15 +0800)]
net: wwan: t7xx: Fix FSM command timeout issue
When driver processes the internal state change command, it use an
asynchronous thread to process the command operation. If the main
thread detects that the task has timed out, the asynchronous thread
will panic when executing the completion notification because the
main thread completion object has been released.
Eric noted a probable shinfo->nr_frags corruption, which indeed
occurs.
The root cause is a buggy MPTCP option len computation in some
circumstances: the ADD_ADDR option should be mutually exclusive
with DSS since the blamed commit.
Still, mptcp_established_options_add_addr() tries to set the
relevant info in mptcp_out_options, if the remaining space is
large enough even when DSS is present.
Since the ADD_ADDR infos and the DSS share the same union
fields, adding first corrupts the latter. In the worst-case
scenario, such corruption increases the DSS binary layout,
exceeding the computed length and possibly overwriting the
skb shared info.
Address the issue by enforcing mutual exclusion in
mptcp_established_options_add_addr(), too.
Cc: stable@vger.kernel.org Reported-by: syzbot+38a095a81f30d82884c1@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/538 Fixes: 1bff1e43a30e ("mptcp: optimize out option generation") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/025d9df8cde3c9a557befc47e9bc08fbbe3476e5.1734771049.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Hattori [Sat, 21 Dec 2024 08:14:48 +0000 (17:14 +0900)]
net: mv643xx_eth: fix an OF node reference leak
Current implementation of mv643xx_eth_shared_of_add_port() calls
of_parse_phandle(), but does not release the refcount on error. Call
of_node_put() in the error path and in mv643xx_eth_shared_of_remove().
This bug was found by an experimental verification tool that I am
developing.
Joshua Washington [Sat, 21 Dec 2024 03:28:06 +0000 (19:28 -0800)]
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Commit ba0925c34e0f ("gve: process XSK TX descriptors as part of RX NAPI")
moved XSK TX processing to be part of the RX NAPI. However, that commit
did not include triggering the RX NAPI in gve_xsk_wakeup. This is
necessary because the TX NAPI only processes TX completions, meaning
that a TX wakeup would not actually trigger XSK descriptor processing.
Also, the branch on XDP_WAKEUP_TX was supposed to have been removed, as
the NAPI should be scheduled whether the wakeup is for RX or TX.
Fixes: ba0925c34e0f ("gve: process XSK TX descriptors as part of RX NAPI") Cc: stable@vger.kernel.org Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://patch.msgid.link/20241221032807.302244-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vitalii Mordan [Fri, 27 Dec 2024 12:30:07 +0000 (15:30 +0300)]
eth: bcmsysport: fix call balance of priv->clk handling routines
Check the return value of clk_prepare_enable to ensure that priv->clk has
been successfully enabled.
If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume,
or bcm_sysport_open, it must not be disabled in any subsequent execution
paths.
Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241227123007.2333397-1-mordan@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 30 Dec 2024 19:20:42 +0000 (11:20 -0800)]
Merge tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"hp-wmi:
- mark 8A15 board for timed OMEN thermal profile
mlx-platform:
- call pci_dev_put() to balance the refcount
thinkpad-acpi:
- Add support for hotkey 0x1401"
* tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad-acpi: Add support for hotkey 0x1401
platform/x86: hp-wmi: mark 8A15 board for timed OMEN thermal profile
platform/x86: mlx-platform: call pci_dev_put() to balance the refcount
Although it's fine to filter the invalid UMP groups at the first probe
time, this will become a problem when UMP groups are updated and
(re-)activated. Then there is no way to re-add the substreams
properly for the legacy rawmidi, and the new active groups will be
still invisible.
So let's revert the change. This will move back to showing the full
16 groups, but it's better than forever lost.
Takashi Iwai [Mon, 30 Dec 2024 11:05:35 +0000 (12:05 +0100)]
ALSA: seq: oss: Fix races at processing SysEx messages
OSS sequencer handles the SysEx messages split in 6 bytes packets, and
ALSA sequencer OSS layer tries to combine those. It stores the data
in the internal buffer and this access is racy as of now, which may
lead to the out-of-bounds access.
As a temporary band-aid fix, introduce a mutex for serializing the
process of the SysEx message packets.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn> Closes: https://lore.kernel.org/2B7E93E4-B13A-4AE4-8E87-306A8EE9BBB7@m.fudan.edu.cn Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241230110543.32454-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Al Viro [Sun, 29 Dec 2024 18:52:32 +0000 (18:52 +0000)]
ALSA: compress_offload: fix remaining descriptor races in sound/core/compress_offload.c
3d3f43fab4cf ("ALSA: compress_offload: improve file descriptors
installation for dma-buf") fixed some of descriptor races in
snd_compr_task_new(), but there's a couple more left.
We need to grab the references to dmabuf before moving them into
descriptor table - trying to do that by descriptor afterwards might
end up getting a different object, with a dangling reference left in
task->{input,output}
Fixes: 3d3f43fab4cf ("ALSA: compress_offload: improve file descriptors installation for dma-buf") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://patch.msgid.link/20241229185232.GA1977892@ZenIV Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / users / dwmw2 / linux.git / log