Linus Torvalds [Sat, 25 Mar 2023 00:59:00 +0000 (17:59 -0700)]
Merge tag '6.3-rc3-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- return less confusing messages on unsupported dialects
(STATUS_NOT_SUPPORTED instead of I/O error)
- fix for overly frequent inactive session termination
- fix refcount leak
- fix bounds check problems found by static checkers
- fix to advertise named stream support correctly
- Fix AES256 signing bug when connected to from MacOS
* tag '6.3-rc3-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: return unsupported error on smb1 mount
ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect
ksmbd: don't terminate inactive sessions after a few seconds
ksmbd: fix possible refcount leak in smb2_open()
ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA
ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION
ksmbd: fix wrong signingkey creation when encryption is AES256
Linus Torvalds [Fri, 24 Mar 2023 22:38:13 +0000 (15:38 -0700)]
Merge tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
files, and out of these, most are for the Qualcomm and NXP platforms,
including:
- A missing 'reserved-memory' property on LG G Watch R that is needed
to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the hardware
settings
- Firmware file names on multiple machines SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing:
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX 'weim' driver
- Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
the Arm scmi firmware driver"
* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
firmware: qcom: scm: fix bogus irq error at probe
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
...
- bq24190 and da9150: Fix race condition in remove path
* tag 'for-v6.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
power: supply: axp288_fuel_gauge: Added check for negative values
power: supply: cros_usbpd: reclassify "default case!" as debug
power: supply: rk817: Fix unsigned comparison with less than zero
Linus Torvalds [Fri, 24 Mar 2023 22:21:24 +0000 (15:21 -0700)]
Merge tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
- usual pile of fixes for amdgpu & i915
- probe error handling fixes for meson, lt8912b bridge
- the host1x patch from Arnd
- panel-orientation fix for Lenovo Book X90F
* tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm: (23 commits)
gpu: host1x: fix uninitialized variable use
drm/amd/display: Set dcn32 caps.seamless_odm
drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk
drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
drm/amd/display: remove outdated 8bpc comments
drm/amdgpu/gfx: set cg flags to enter/exit safe mode
drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
drm/amdgpu: add mes resume when do gfx post soft reset
drm/amdgpu: skip ASIC reset for APUs when go to S4
drm/amdgpu: reposition the gpu reset checking for reuse
drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
drm/meson: fix missing component unbind on bind errors
drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
Revert "drm/i915/hwmon: Enable PL1 power limit"
drm/i915: Update vblank timestamping stuff on seamless M/N change
drm/i915: Fix format for perf_limit_reasons
drm/i915/gt: perform uc late init after probe error injection
drm/i915/active: Fix missing debug object activation
drm/i915/guc: Fix missing ecodes
drm/i915/mtl: Disable MC6 for MTL A step
...
Linus Torvalds [Fri, 24 Mar 2023 21:20:48 +0000 (14:20 -0700)]
Merge tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
target flag (initially added to allow swap to dm-crypt) to throttle
the amount of outstanding swap bios.
- Fix DM crypt soft lockup warnings by calling cond_resched() from the
cpu intensive loop in dmcrypt_write().
- Fix DM crypt to not access an uninitialized tasklet. This fix allows
for consistent handling of IO completion, by _not_ needlessly punting
to a workqueue when tasklets are not needed.
- Fix DM core's alloc_dev() initialization for DM stats to check for
and propagate alloc_percpu() failure.
* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm stats: check for and propagate alloc_percpu failure
dm crypt: avoid accessing uninitialized tasklet
dm crypt: add cond_resched() to dmcrypt_write()
dm thin: fix deadlock when swapping to thin device
Linus Torvalds [Fri, 24 Mar 2023 21:10:39 +0000 (14:10 -0700)]
Merge tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Send Identify with CNS 06h only to I/O controllers (Martin
George)
- Fix nvme_tcp_term_pdu to match spec (Caleb Sander)
- Pass in issue_flags for uring_cmd, so the end_io handlers don't need
to assume what the right context is (me)
- Fix for ublk, marking it as LIVE before adding it to avoid races on
the initial IO (Ming)
* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers
block/io_uring: pass in issue_flags for uring_cmd task_work handling
block: ublk_drv: mark device as LIVE before adding disk
Linus Torvalds [Fri, 24 Mar 2023 21:01:01 +0000 (14:01 -0700)]
Merge tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix an issue with repeated -ECONNREFUSED on a socket (me)
- Fix a NULL pointer deference due to a stale lookup cache for
allocating direct descriptors (Savino)
* tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux:
io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
io_uring/net: avoid sending -ECONNABORTED on repeated connection requests
Linus Torvalds [Fri, 24 Mar 2023 20:45:58 +0000 (13:45 -0700)]
Merge tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
Linus Torvalds [Fri, 24 Mar 2023 17:12:14 +0000 (10:12 -0700)]
Merge tag 'slab-fix-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"A single build fix for a corner case configuration that is apparently
possible to achieve on some arches, from Geert"
* tag 'slab-fix-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP
Linus Torvalds [Fri, 24 Mar 2023 17:07:38 +0000 (10:07 -0700)]
Merge tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Set the NX compat flag for arm64 and zboot, to ensure compatibility
with EFI firmware that complies with tightening requirements imposed
across the ecosystem.
- Improve identification of Ampere Altra systems based on SMBIOS data.
- Fix some issues related to the EFI framebuffer that were introduced
as a result from some refactoring related to zboot and the merge with
sysfb.
- Makefile tweak to avoid rebuilding vmlinuz unnecessarily.
- Fix efi_random_alloc() return value on out of memory condition.
* tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
efi/libstub: Use relocated version of kernel's struct screen_info
efi/libstub: zboot: Add compressed image to make targets
efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
efi: sysfb_efi: Fix DMI quirks not working for simpledrm
efi/libstub: smbios: Drop unused 'recsize' parameter
arm64: efi: Use SMBIOS processor version to key off Ampere quirk
efi/libstub: smbios: Use length member instead of record struct size
efi: earlycon: Reprobe after parsing config tables
arm64: efi: Set NX compat flag in PE/COFF header
efi/libstub: arm64: Remap relocated image with strict permissions
efi/libstub: zboot: Mark zboot EFI application as NX compatible
Arnd Bergmann [Fri, 24 Mar 2023 17:06:28 +0000 (18:06 +0100)]
Merge tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm driver fixes for v6.3
Support for the secure world interrupting the SCM driver drive the wait
queue mechanism was recently introduced, but most platforms doesn't have
this mechanism and an error should not be printed in the log.
The rmtfs_mem driver recently gained support for assigning the region to
multiple VMIDs, but accidentally removed the support for running without
assignment. A couple of changes are introducd to correct this.
The SC8280XP LLCC slice configuration is wrong, reslting in incorrect
configuration of the hardware. The table is corrected, based on the
datasheet.
* tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: fix bogus irq error at probe
soc: qcom: rmtfs: handle optional qcom,vmid correctly
soc: qcom: rmtfs: fix error handling reading qcom,vmid
soc: qcom: llcc: Fix slice configuration values for SC8280XP
Arnd Bergmann [Fri, 24 Mar 2023 17:05:35 +0000 (18:05 +0100)]
Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm ARM64 Devicetree fixes for v6.3
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
arm64: dts: qcom: sc8280xp: fix rx frame shapping info
arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
arm64: dts: qcom: sm8550: Use correct CPU compatibles
arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
...
Linus Torvalds [Fri, 24 Mar 2023 16:52:26 +0000 (09:52 -0700)]
Merge tag 'riscv-for-linus-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to match the CSR ASID masking rules when passing ASIDs to
firmware
- Force GCC to use ISA 2.2, to avoid a host of compatibily issues
between toolchains
* tag 'riscv-for-linus-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Handle zicsr/zifencei issues between clang and binutils
riscv: mm: Fix incorrect ASID argument when flushing TLB
Linus Torvalds [Fri, 24 Mar 2023 16:44:43 +0000 (09:44 -0700)]
Merge tag 'for-linus-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- fix build warning
- avoid concurrent accesses to the Xen PV console ring page
* tag 'for-linus-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/PVH: avoid 32-bit build warning when obtaining VGA console info
hvc/xen: prevent concurrent accesses to the shared ring
Linus Torvalds [Fri, 24 Mar 2023 16:05:25 +0000 (09:05 -0700)]
Merge tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Tzung-Bi Shih:
"Fix a kernel data leak vulnerability"
* tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl
Linus Torvalds [Fri, 24 Mar 2023 16:02:24 +0000 (09:02 -0700)]
Merge tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of regular driver fixes"
* tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
i2c: hisi: Only use the completion interrupt to finish the transfer
i2c: hisi: Avoid redundant interrupts
i2c: mxs: ensure that DMA buffers are safe for DMA
i2c: imx-lpi2c: check only for enabled interrupt flags
i2c: imx-lpi2c: clean rx/tx buffers upon new message
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
Linus Torvalds [Fri, 24 Mar 2023 15:32:10 +0000 (08:32 -0700)]
Merge tag 'for-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes, the zoned accounting fix is spread across a few
patches, preparatory and the actual fixes:
- zoned mode:
- fix accounting of unusable zone space
- fix zone activation condition for DUP profile
- preparatory patches
- improved error handling of missing chunks
- fix compiler warning"
* tag 'for-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: drop space_info->active_total_bytes
btrfs: zoned: count fresh BG region as zone unusable
btrfs: use temporary variable for space_info in btrfs_update_block_group
btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING
btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile
btrfs: fix compiler warning on SPARC/PA-RISC handling fscrypt_setup_filename
btrfs: handle missing chunk mapping more gracefully
Linus Torvalds [Fri, 24 Mar 2023 15:27:13 +0000 (08:27 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers.
The core fix adds a UFS device to an existing quirk to avoid a huge
delay on boot"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
scsi: qla2xxx: Synchronize the IOCB count to be in order
scsi: qla2xxx: Perform lockless command completion in abort path
scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
Namjae Jeon [Thu, 23 Mar 2023 12:15:52 +0000 (21:15 +0900)]
ksmbd: return unsupported error on smb1 mount
ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Jakub Kicinski [Thu, 23 Mar 2023 22:56:20 +0000 (15:56 -0700)]
Merge tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix MGMT add advmon with RSSI command
- L2CAP: Fix responding with wrong PDU type
- Fix race condition in hci_cmd_sync_clear
- ISO: Fix timestamped HCI ISO data packet parsing
- HCI: Fix global-out-of-bounds
- hci_sync: Resume adv with no RPA when active scan
* tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
Bluetooth: hci_sync: Resume adv with no RPA when active scan
====================
Jakub Kicinski [Thu, 23 Mar 2023 22:47:53 +0000 (15:47 -0700)]
Merge tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
Third set of fixes for v6.3. mt76 has two kernel crash fixes and
adding back 160 MHz channel support for mt7915. mac80211 has fixes for
a race in transmit path and two mesh related fixes. iwlwifi also has
fixes for races.
* tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix mesh path discovery based on unicast packets
wifi: mac80211: fix qos on mesh interfaces
wifi: iwlwifi: mvm: protect TXQ list manipulation
wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue()
wifi: mwifiex: mark OF related data as maybe unused
wifi: mt76: connac: do not check WED status for non-mmio devices
wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
wifi: mt76: do not run mt76_unregister_device() on unregistered hw
====================
Linus Torvalds [Thu, 23 Mar 2023 22:25:49 +0000 (15:25 -0700)]
Merge tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
- Reinstate commit 970343cd4904 ("GFS2: free disk inode which is
deleted by remote node -V2") as reverting that commit could cause
gfs2_put_super() to hang.
* tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
Sungwoo Kim [Tue, 21 Mar 2023 01:50:18 +0000 (21:50 -0400)]
Bluetooth: HCI: Fix global-out-of-bounds
To loop a variable-length array, hci_init_stage_sync(stage) considers
that stage[i] is valid as long as stage[i-1].func is valid.
Thus, the last element of stage[].func should be intentionally invalid
as hci_init0[], le_init2[], and others did.
However, amp_init1[] and amp_init2[] have no invalid element, letting
hci_init_stage_sync() keep accessing amp_init1[] over its valid range.
This patch fixes this by adding {} in the last of amp_init1[] and
amp_init2[].
Howard Chung [Thu, 16 Mar 2023 10:11:38 +0000 (18:11 +0800)]
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable
length argument. This causes host not able to register advmon with rssi.
This patch has been locally tested by adding monitor with rssi via
btmgmt on a kernel 6.1 machine.
Reviewed-by: Archie Pusaka <apusaka@chromium.org> Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zheng Wang [Thu, 9 Mar 2023 08:07:39 +0000 (16:07 +0800)]
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.
If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.
Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Wed, 8 Mar 2023 22:20:34 +0000 (14:20 -0800)]
Bluetooth: L2CAP: Fix responding with wrong PDU type
L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not
L2CAP_LE_CONN_RSP:
L2CAP LE EATT Server - Reject - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
Unexpected L2CAP response code (expected 0x18)
L2CAP LE EATT Server - Reject - test failed
L2CAP LE EATT Server - Reject - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x18
L2CAP LE EATT Server - Reject - test passed
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stephan Gerhold [Wed, 8 Mar 2023 13:31:55 +0000 (14:31 +0100)]
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:
Bluetooth: hci0: Opcode 0x c03 failed: -110
Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.
Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.
Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Wed, 8 Mar 2023 07:58:37 +0000 (13:28 +0530)]
Bluetooth: btinel: Check ACPI handle for NULL before accessing
Older platforms and Virtual platforms which doesn't have support for
bluetooth device in ACPI firmware will not have valid ACPI handle.
Check for validity of handle before accessing.
dmesg log from simics environment (virtual platform):
Fixes: 294d749b5df5 ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Nathan Chancellor [Mon, 13 Mar 2023 23:00:23 +0000 (16:00 -0700)]
riscv: Handle zicsr/zifencei issues between clang and binutils
There are two related issues that appear in certain combinations with
clang and GNU binutils.
The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o
The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):
../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.
To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.
Jens Axboe [Thu, 23 Mar 2023 19:02:20 +0000 (13:02 -0600)]
Merge tag 'nvme-6.3-2023-03-23' of git://git.infradead.org/nvme into block-6.3
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- send Identify with CNS 06h only to I/O controllers (Martin George)
- fix nvme_tcp_term_pdu to match spec (Caleb Sander)"
* tag 'nvme-6.3-2023-03-23' of git://git.infradead.org/nvme:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers
Bob Peterson [Thu, 23 Mar 2023 16:26:02 +0000 (12:26 -0400)]
Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
It turns out that reverting commit 970343cd4904 ("GFS2: free disk inode
which is deleted by remote node -V2") causes a regression related to
evicting inodes that were unlinked on a different cluster node.
We could also have simply added a call to d_mark_dontcache() to function
gfs2_try_evict(), but the original pre-revert code is better tested and
proven.
Linus Torvalds [Thu, 23 Mar 2023 18:05:08 +0000 (11:05 -0700)]
Merge tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Silence a false positive smatch warning about an uninitialized
variable
- Fix an error message to provide more useful information about invalid
zone append write results
* tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix error message in zonefs_file_dio_append()
zonefs: Prevent uninitialized symbol 'size' warning
Ard Biesheuvel [Tue, 7 Mar 2023 23:21:34 +0000 (00:21 +0100)]
efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
The logic in efi_random_alloc() will iterate over the memory map twice,
once to count the number of candidate slots, and another time to locate
the chosen slot after randomization.
If there is insufficient memory to do the allocation, the second loop
will run to completion without actually having located a slot, but we
currently return EFI_SUCCESS in this case, as we fail to initialize
status to the appropriate error value of EFI_OUT_OF_RESOURCES.
Kai-Heng Feng [Wed, 15 Mar 2023 12:07:23 +0000 (20:07 +0800)]
drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Hung [Mon, 6 Mar 2023 03:39:51 +0000 (11:39 +0800)]
drm/amd/display: remove outdated 8bpc comments
[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YuBiao Wang [Thu, 16 Mar 2023 03:30:32 +0000 (11:30 +0800)]
drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.
[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tong Liu01 [Wed, 15 Mar 2023 07:24:22 +0000 (15:24 +0800)]
drm/amdgpu: add mes resume when do gfx post soft reset
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Thu, 9 Mar 2023 08:27:51 +0000 (16:27 +0800)]
drm/amdgpu: skip ASIC reset for APUs when go to S4
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
Ard Biesheuvel [Wed, 22 Mar 2023 00:11:18 +0000 (01:11 +0100)]
efi/libstub: Use relocated version of kernel's struct screen_info
In some cases, we expose the kernel's struct screen_info to the EFI stub
directly, so it gets populated before even entering the kernel. This
means the early console is available as soon as the early param parsing
happens, which is nice. It also means we need two different ways to pass
this information, as this trick only works if the EFI stub is baked into
the core kernel image, which is not always the case.
Huacai reports that the preparatory refactoring that was needed to
implement this alternative method for zboot resulted in a non-functional
efifb earlycon for other cases as well, due to the reordering of the
kernel image relocation with the population of the screen_info struct,
and the latter now takes place after copying the image to its new
location, which means we copy the old, uninitialized state.
So let's ensure that the same-image version of alloc_screen_info()
produces the correct screen_info pointer, by taking the displacement of
the loaded image into account.
Reported-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/ Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file") Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 23 Mar 2023 05:50:01 +0000 (22:50 -0700)]
Merge tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-03-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: E-Switch, Fix an Oops in error handling code
net/mlx5: Read the TC mapping of all priorities on ETS query
net/mlx5e: Overcome slow response for first macsec ASO WQE
net/mlx5e: Initialize link speed to zero
net/mlx5: Fix steering rules cleanup
net/mlx5e: Block entering switchdev mode with ns inconsistency
net/mlx5e: Set uplink rep as NETNS_LOCAL
====================
Jakub Kicinski [Thu, 23 Mar 2023 05:45:22 +0000 (22:45 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (ice)
This series contains updates to ice driver only.
Piotr sets first_desc field for proper handling of Flow Director
packets.
Michal moves error checking for VF earlier in function to properly return
error before other checks/reporting; he also corrects VSI filter removal to
be done during VSI removal and not rebuild.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: remove filters only if VSI is deleted
ice: check if VF exists before mode check
ice: fix rx buffers handling for flow director packets
====================
Jakub Kicinski [Thu, 23 Mar 2023 05:42:15 +0000 (22:42 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Stefan Assmann adds check, and return, if driver has already gone
through remove to prevent hang for iavf.
Radoslaw adds zero initialization to ensure Flow Director packets are
populated with correct values for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix flow director packet filter programming
iavf: fix hang on reboot with ice
====================
Arınç ÜNAL [Mon, 20 Mar 2023 19:05:19 +0000 (22:05 +0300)]
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.
Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.
This way, the switch should consume less power regardless of port 6 being
used.
Update the comment explaining mt7530_pad_clk_setup().
Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.
Arınç ÜNAL [Mon, 20 Mar 2023 19:05:18 +0000 (22:05 +0300)]
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.
Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.
Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.
Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.
Issue was originally reported by Anton Lundin on 2022-06-22 (link below).
Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.
The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.
The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.
Joshua Washington [Tue, 21 Mar 2023 17:23:32 +0000 (10:23 -0700)]
gve: Cache link_speed value from device
The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.
Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 21 Mar 2023 23:28:31 +0000 (01:28 +0200)]
net: enetc: fix aggregate RMON counters not showing the ranges
When running "ethtool -S eno0 --groups rmon" without an explicit "--src
emac|pmac" argument, the kernel will not report
rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets,
etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not
populate the "ranges" argument.
ocelot_port_get_rmon_stats() does things differently and things work
there. I had forgotten to make sure that the code is structured the same
way in both drivers, so do that now.
Fixes: cf52bd238b75 ("net: enetc: add support for MAC Merge statistics counters") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brian Gix [Mon, 6 Mar 2023 22:32:21 +0000 (14:32 -0800)]
Bluetooth: Remove "Power-on" check from Mesh feature
The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.
Fixes: af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh") Signed-off-by: Brian Gix <brian.gix@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Min Li [Sat, 4 Mar 2023 13:50:35 +0000 (21:50 +0800)]
Bluetooth: Fix race condition in hci_cmd_sync_clear
There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.
Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution") Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Tue, 28 Feb 2023 11:01:54 +0000 (16:31 +0530)]
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Current flow interates over entire ACPI table entries looking for
Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates
over ACPI entries relvant to Bluetooth device only.
Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Mon, 20 Feb 2023 19:38:24 +0000 (19:38 +0000)]
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Fri, 24 Feb 2023 23:43:31 +0000 (15:43 -0800)]
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
Because some transports don't have a dedicated type for ISO packets
(see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type
when in fact they are ISO packets.
In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.
Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhengping Jiang [Wed, 22 Feb 2023 00:17:56 +0000 (16:17 -0800)]
Bluetooth: hci_sync: Resume adv with no RPA when active scan
The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.
According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command
This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."
If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.
If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.
Fixes: 9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Namjae Jeon [Tue, 21 Mar 2023 06:36:40 +0000 (15:36 +0900)]
ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect
ksmbd returned "Input/output error" when mounting with vers=2.0 to
ksmbd. It should return STATUS_NOT_SUPPORTED on unsupported smb2.0
dialect.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 21 Mar 2023 06:25:34 +0000 (15:25 +0900)]
ksmbd: don't terminate inactive sessions after a few seconds
Steve reported that inactive sessions are terminated after a few
seconds. ksmbd terminate when receiving -EAGAIN error from
kernel_recvmsg(). -EAGAIN means there is no data available in timeout.
So ksmbd should keep connection with unlimited retries instead of
terminating inactive sessions.
Cc: stable@vger.kernel.org Reported-by: Steve French <stfrench@microsoft.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 7 Mar 2023 12:56:07 +0000 (21:56 +0900)]
ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
Smatch static checker warning:
fs/ksmbd/vfs.c:1040 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'length'
fs/ksmbd/vfs.c:1041 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'start'
Fix unexpected result that could caused from negative start and length.
Fixes: f44158485826 ("cifsd: add file operations") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 28 Feb 2023 15:02:30 +0000 (00:02 +0900)]
ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION
If vfs objects = streams_xattr in ksmbd.conf FILE_NAMED_STREAMS should
be set to Attributes in FS_ATTRIBUTE_INFORMATION. MacOS client show
"Format: SMB (Unknown)" on faked NTFS and no streams support.
Cc: stable@vger.kernel.org Reported-by: Miao Lihua <441884205@qq.com> Tested-by: Miao Lihua <441884205@qq.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 28 Feb 2023 15:01:21 +0000 (00:01 +0900)]
ksmbd: fix wrong signingkey creation when encryption is AES256
MacOS and Win11 support AES256 encrytion and it is included in the cipher
array of encryption context. Especially on macOS, The most preferred
cipher is AES256. Connecting to ksmbd fails on newer MacOS clients that
support AES256 encryption. MacOS send disconnect request after receiving
final session setup response from ksmbd. Because final session setup is
signed with signing key was generated incorrectly.
For signging key, 'L' value should be initialized to 128 if key size is
16bytes.
Cc: stable@vger.kernel.org Reported-by: Miao Lihua <441884205@qq.com> Tested-by: Miao Lihua <441884205@qq.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Wed, 22 Mar 2023 21:09:20 +0000 (14:09 -0700)]
Merge tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Fix bootconfig test script to test increased maximum number (8192)
node correctly
- Change the console message if there is no bootconfig data and the
kernel is compiled with CONFIG_BOOT_CONFIG_FORCE=y
* tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
bootconfig: Fix testcase to increase max node
Commit 7c3d5c20dc16 ("thermal/core: Add a generic thermal_zone_get_trip()
function") stopped marking trip points with a zero temperature as
disabled, behavior that was originally introduced in commit 81ad4276b505
("Thermal: Ignore invalid trip points").
When using the mlxsw driver we see that when such trip points are not
disabled, the thermal subsystem repeatedly tries to set the state of the
associated cooling devices to the maximum state.
Address this by restoring the original behavior and mark trip points
with a zero temperature as disabled.
Fixes: 7c3d5c20dc16 ("thermal/core: Add a generic thermal_zone_get_trip() function") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Savino Dicanosa [Tue, 21 Mar 2023 19:44:02 +0000 (19:44 +0000)]
io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
When fixed files are unregistered, file_alloc_end and alloc_hint
are not cleared. This can later cause a NULL pointer dereference in
io_file_bitmap_get() if auto index selection is enabled via
IORING_FILE_INDEX_ALLOC:
Matheus Castello [Wed, 22 Mar 2023 14:38:21 +0000 (15:38 +0100)]
drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.
Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Matheus Castello <matheus.castello@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it
Johan Hovold [Mon, 6 Mar 2023 10:35:33 +0000 (11:35 +0100)]
drm/meson: fix missing component unbind on bind errors
Make sure to unbind all subcomponents when binding the aggregate device
fails.
Fixes: a41e82e6c457 ("drm/meson: Add support for components") Cc: stable@vger.kernel.org # 4.12 Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230306103533.4915-1-johan+linaro@kernel.org
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
When driver doesn't implement a bpf_xdp_metadata kfunc the fallback
implementation returns EOPNOTSUPP, which indicate device driver doesn't
implement this kfunc.
Currently many drivers also return EOPNOTSUPP when the hint isn't
available, which is ambiguous from an API point of view. Instead
change drivers to return ENODATA in these cases.
There can be natural cases why a driver doesn't provide any hardware
info for a specific hint, even on a frame to frame basis (e.g. PTP).
Lets keep these cases as separate return codes.
When describing the return values, adjust the function kernel-doc layout
to get proper rendering for the return values.
Jan Beulich [Tue, 21 Mar 2023 08:03:26 +0000 (09:03 +0100)]
x86/PVH: avoid 32-bit build warning when obtaining VGA console info
In the commit referenced below I failed to pay attention to this code
also being buildable as 32-bit. Adjust the type of "ret" - there's no
real need for it to be wider than 32 bits.
Fixes: 934ef33ee75c ("x86/PVH: obtain VGA console info in Dom0") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/2d2193ff-670b-0a27-e12d-2c5c4c121c79@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
Roger Pau Monne [Wed, 30 Nov 2022 15:09:11 +0000 (16:09 +0100)]
hvc/xen: prevent concurrent accesses to the shared ring
The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.
Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.
Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.
Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
Ido Schimmel [Tue, 21 Mar 2023 11:42:00 +0000 (12:42 +0100)]
mlxsw: spectrum_fid: Fix incorrect local port type
Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.
Fix by storing the local port in u16, as is done in the rest of the
code.
Fixes: bf73904f5fba ("mlxsw: Add support for 802.1Q FID family") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rafael J. Wysocki [Fri, 17 Mar 2023 17:03:40 +0000 (18:03 +0100)]
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.
Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().
Introduce a core thermal API function, thermal_cooling_device_update(),
for updating the max_state value for a cooling device and rearranging
its statistics in sysfs after a possible change of its ->get_max_state()
callback return value.
That callback is now invoked only once, during cooling device
registration, to populate the max_state field in the cooling device
object, so if its return value changes, it needs to be invoked again
and the new return value needs to be stored as max_state. Moreover,
the statistics presented in sysfs need to be rearranged in general,
because there may not be enough room in them to store data for all
of the possible states (in the case when max_state grows).
The new function takes care of that (and some other minor things
related to it), but some extra locking and lockdep annotations are
added in several places too to protect against crashes in the cases
when the statistics are not present or when a stale max_state value
might be used by sysfs attributes.
Note that the actual user of the new function will be added separately.
Introduce a helper function, thermal_cooling_device_present(), for
checking if the given cooling device is in the list of registered
cooling devices to avoid some code duplication in a subsequent
patch.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The cpufreq policy notifier in the ACPI processor driver may as
well be registered before the driver itself, which causes
acpi_processor_cpufreq_init to be true (unless the notifier
registration fails, which is unlikely at that point) when the
ACPI CPU thermal cooling devices are registered, so the
processor_get_max_state() result does not change while
acpi_processor_driver_init() is running.
Change the ordering in acpi_processor_driver_init() accordingly
to prevent the max_state value from remaining 0 permanently for all
ACPI CPU cooling devices due to setting acpi_processor_cpufreq_init
too late. [Note that processor_get_max_state() may still return
different values at different times after this change, depending on
the cpufreq driver registration time, but that issue needs to be
addressed separately.]
bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
Change no bootconfig data error message if user do not specify 'bootconfig'
option but CONFIG_BOOT_CONFIG_FORCE=y.
With CONFIG_BOOT_CONFIG_FORCE=y, the kernel proceeds bootconfig check even
if user does not specify 'bootconfig' option. So the current error message
is confusing. Let's show just an information message to notice skipping
the bootconfig in that case.
Felix Fietkau [Tue, 14 Mar 2023 09:59:52 +0000 (10:59 +0100)]
wifi: mac80211: fix mesh path discovery based on unicast packets
If a packet has reached its intended destination, it was bumped to the code
that accepts it, without first checking if a mesh_path needs to be created
based on the discovered source.
Fix this by moving the destination address check further down.
Cc: stable@vger.kernel.org Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230314095956.62085-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
projects / users / jedix / linux-maple.git / log