Ping-Ke Shih [Tue, 1 Aug 2023 02:11:27 +0000 (10:11 +0800)]
wifi: rtw89: return failure if needed firmware elements are not recognized
WiFi 7 chips doesn't have static const tables defined in driver. If tables
aren't loaded properly from firmware file, driver can get NULL pointer
access exception. One way is to add the checking statements when trying to
access these tables, but I choose to check them right after loading
firmware elements from firmware file, so I don't need to add error handlers
everywhere.
Currently, the needed firmware elements of WiFi 6 chips are all zero, and
coming WiFi 7 chip will need at least BB MCU, parameters of BB and RF.
We will add them after 8922AE is verified.
Ping-Ke Shih [Tue, 1 Aug 2023 02:11:26 +0000 (10:11 +0800)]
wifi: rtw89: add to parse firmware elements of BB and RF tables
The tables of BB and RF parameters are pairs of {addr, value}. Load them
and convert from little-endian to CPU order, and show the version to clear
which version we are using.
rtw89_8922ae 0000:03:00.0: Firmware element BB version: 00 04 00 00
rtw89_8922ae 0000:03:00.0: Firmware element radio A version: 00 13 00 00
rtw89_8922ae 0000:03:00.0: Firmware element NCTL version: 00 05 00 00
We use tables defined in firmware elements with higher priority than
original static const tables defined in driver, because WiFi 7 chips will
not define the tables in driver, and existing chips can possibly migrate to
the new design one by one.
Ping-Ke Shih [Tue, 1 Aug 2023 02:11:25 +0000 (10:11 +0800)]
wifi: rtw89: introduce infrastructure of firmware elements
In order to pack more data into firmware file, we introduce firmware
elements and append BB_MCU firmware first. The first part of new firmware
file is still unchanged firmware of WiFi CPU, so the new firmware format
can be backward compatible to old format. The new elements part consists
of ID and size basically, which can append more elements simply. To avoid
unaligned access in certain platform and be easy to read, headers of all
elements start at 16-byte aligned address.
+===========================================+
| original firmware |
| +-------------+
| | padding |
+===========================================+
| elm ID 1 | elm size | other header data |
+----------+----------+ |
| |
+-------------------------------------------+
| content (variable length) |
| +-------------+
| | padding |
+===========================================+
| elm ID 2 | elm size | other header data |
+----------+----------+ |
| |
+-------------------------------------------+
| content (variable length) |
| +-----------------------+
| | (no padding for the last one)
+===================+
More detail of element header is shown below. The additional fields
'version' and 'element_priv[]' are meta data of elements, so that we can
know element version easily, and element_priv[] provide specific fields
for certain element, such as RF path index for RF parameter tables.
+===========================================+
| elm ID | elm size | version | rsvd0 |
+----------+----------+----------+----------+
| rsvd1/2 | element_priv[] |
+-------------------------------------------+
Ping-Ke Shih [Tue, 1 Aug 2023 02:11:24 +0000 (10:11 +0800)]
wifi: rtw89: add firmware suit for BB MCU 0/1
For existing chips, firmware is only for WiFi CPU, but WiFi 7 chips add
new hardware component BB MCU that needs firmware as well. The firmwares of
BB MCU 0/1 are also downloaded via the same path like WiFi CPU firmware,
and use the same firmware header format, so add firmware suits to access
them commonly.
Ping-Ke Shih [Tue, 1 Aug 2023 02:11:23 +0000 (10:11 +0800)]
wifi: rtw89: add firmware parser for v1 format
A firmware with v1 format contains many sections to download. Add parser to
read section type, target address, length, checksum and so on, and then
download the section to WiFi CPU with proper location.
The additional dynamic header length named dynamic_hdr_len is used to
skip content of dynamic header containing compiler flags of firmware, which
can help to determine variant firmware build, but currently rtw89 only
use single one variant. So, just skip the content.
The layout of a WiFi CPU firmware with v1 format looks like:
Ping-Ke Shih [Tue, 1 Aug 2023 02:11:22 +0000 (10:11 +0800)]
wifi: rtw89: introduce v1 format of firmware header
New firmware header is used by upcoming WiFi 7 chips to have more
information, so use common field w3[31:24] to determine header version,
and then use corresponding function to read firmware version and commit ID:
rtw89_8852be 0000:03:00.0: Firmware version 0.29.29.1 (799134c3), cmd version 1, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.29.1 (799134c3), cmd version 1, type 3
Chin-Yen Lee [Tue, 1 Aug 2023 02:11:21 +0000 (10:11 +0800)]
wifi: rtw89: support firmware log with formatted text
Original firmware log which is sent via C2H message bloats
code size of firmware and is also length-limited. So we put
some common log into format file, and firmware could use a
log ID and some variables in C2H message to map a formatted
text via pre-designed rule.
Chin-Yen Lee [Tue, 1 Aug 2023 02:11:20 +0000 (10:11 +0800)]
wifi: rtw89: recognize log format from firmware file
Firmware log format is an element of multi-firmware file
and used for firmware to provide log with formatted text.
Driver needs to recognize it in advance if it exists.
Wen Gong [Tue, 18 Jul 2023 02:47:24 +0000 (22:47 -0400)]
wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work
Deadlock is easily happened while shutdown wlan interface such as run
"ifconfig wlan0 down".
The reason is because when ar->regd_update_work is ran, it will
call wiphy_lock(ar->hw->wiphy) in function ath12k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Wen Gong [Mon, 17 Jul 2023 03:44:57 +0000 (23:44 -0400)]
wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
When wlan interface is up, and 11d scan is sent to the firmware, then
firmware needs to spend couple of seconds to complete the 11d scan. If
normal scan from user space arrives to ath12k at this moment, then the
normal scan request is also sent to the firmware, but the scan started
event will be reported to ath12k until the 11d scan complete. When timed
out for the scan started in ath12k, ath12k stops the normal scan and the
firmware reports WMI_SCAN_EVENT_DEQUEUED to ath12k for the normal scan.
ath12k has no handler for the event and then timed out for the scan
completed in ath12k_scan_stop(), and ath12k prints the following error
message.
[ 1491.604750] ath12k_pci 0000:02:00.0: failed to receive scan abort comple: timed out
[ 1491.604756] ath12k_pci 0000:02:00.0: failed to stop scan: -110
[ 1491.604758] ath12k_pci 0000:02:00.0: failed to start hw scan: -110
Add a handler for WMI_SCAN_EVENT_DEQUEUED and then complete the scan to
get rid of the above error message.
Aloka Dixit [Wed, 2 Aug 2023 17:04:07 +0000 (20:04 +0300)]
wifi: ath12k: configure puncturing bitmap
Enable the feature flag to indicate the driver support for
preamble puncturing. Firmware will support this feature
by default from IEEE 802.11be onwards.
Configure the bitmap as part of VDEV start/restart and
peer association commands.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-12-quic_alokad@quicinc.com
Aloka Dixit [Wed, 2 Aug 2023 17:04:04 +0000 (20:04 +0300)]
wifi: ath12k: prepare EHT peer assoc parameters
Add new parameters and prepare the association data for an EHT peer.
MCS data uses the format described in IEEE P802.11be/D2.0, May 2022,
9.4.2.313.4, convert it into the format expected by the firmware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-7-quic_alokad@quicinc.com
Aloka Dixit [Wed, 2 Aug 2023 17:04:02 +0000 (20:04 +0300)]
wifi: ath12k: WMI support to process EHT capabilities
Add WMI support to process the EHT capabilities passed by
the firmware. Add required EHT specific definitions in
structures ath12k_band_cap and ath12k_wmi_svc_rdy_ext_parse.
For single_pdev chip such as WCN7850, only one pdev is created
and only one hardware is registered to mac80211. This one pdev
manages both 2.4 GHz radio and 5 GHz/6 GHz radio.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-4-quic_alokad@quicinc.com
Aloka Dixit [Wed, 2 Aug 2023 17:04:01 +0000 (20:04 +0300)]
wifi: ath12k: move HE capabilities processing to a new function
The function ath12k_mac_copy_sband_iftype_data() is currently
used HE capabilities propagation but it can be extended to
include EHT data. Move the HE specific functionality from to
ath12k_mac_copy_he_cap() to make EHT additions easier.
Aloka Dixit [Wed, 2 Aug 2023 17:04:00 +0000 (20:04 +0300)]
wifi: ath12k: rename HE capabilities setup/copy functions
Functions ath12k_mac_setup_he_cap() and ath12k_mac_copy_he_cap()
propagate HE and 6GHz capabilities to the userspace using an instance
of struct ieee80211_sband_iftype_data. This structure now has a new
member 'eht_cap' to include EHT capabilities as well.
Rename the above mentioned functions to indicate that their use is not
limited to HE.
Also, replace the local variable 'band' with 'sband' and reuse
'band' for the type enum nl80211_band.
Wen Gong [Mon, 17 Jul 2023 03:34:31 +0000 (23:34 -0400)]
wifi: ath12k: change to use dynamic memory for channel list of scan
Currently there are about 60 channels for 6 GHz, then the size of
chan_list in struct scan_req_params which is 40 is not enough to
fill all the channel list of 6 GHz.
Use dynamic memory to save the channel list of scan.
Wen Gong [Fri, 14 Jul 2023 09:25:55 +0000 (05:25 -0400)]
wifi: ath12k: trigger station disconnect on hardware restart
Currently after the hardware restart triggered from the driver, the
station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.
After the target restart, its wifi mac sequence number gets reset to
zero. Hence AP to which our device is connected will receive frames
with a wifi mac sequence number jump to the past, thereby resulting
in the AP dropping all these frames, until the frame arrives with a
wifi mac sequence number which AP was expecting.
To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.
wifi: ath12k: Use pdev_id rather than mac_id to get pdev
We are seeing kernel crash in below test scenario:
1. make DUT connect to an WPA3 encrypted 11ax AP in Ch44 HE80
2. use "wpa_cli -i <inf> disconnect" to disconnect
3. wait for DUT to automatically reconnect
The crash is because, for WCN7850, only ab->pdev[0] is initialized, while mac_id here is
misused to retrieve pdev and it is not zero, leading to a NULL pointer access.
Fix this issue by getting pdev_id first and then use it to retrieve pdev.
Also fix some other code snippets which have the same issue.
Wen Gong [Fri, 14 Jul 2023 07:24:05 +0000 (03:24 -0400)]
wifi: ath12k: avoid array overflow of hw mode for preferred_hw_mode
Currently ath12k define WMI_HOST_HW_MODE_DBS_OR_SBS=5 as max hw mode
for enum wmi_host_hw_mode_config_type, it is also same for the array
ath12k_hw_mode_pri_map.
When tested with new version firmware/board data which support new
hw mode eMLSR mode with hw mode value 8, it leads overflow usage for
array ath12k_hw_mode_pri_map in function ath12k_wmi_hw_mode_caps(),
and then lead preferred_hw_mode changed to 8, and finally function
ath12k_pull_mac_phy_cap_svc_ready_ext() select the capability of hw
mode 8, but the capability of eMLSR mode report from firmware does
not support 2.4 GHz band for WCN7850, so finally 2.4 GHz band is
disabled.
Skip the hw mode which exceeds WMI_HOST_HW_MODE_MAX in function
ath12k_wmi_hw_mode_caps() helps to avoid array overflow, then the 2.4
GHz band will not be disabled.
This is to keep compatibility with newer version firmware/board data
files, this change is still needed after ath12k add eMLSR hw mode 8 in
array ath12k_hw_mode_pri_map and enum wmi_host_hw_mode_config_type,
because more hw mode maybe added in next firmware/board data version
e.g hw mode 9, then it will also lead new array overflow without this
change.
wifi: ath12k: fix memcpy array overflow in ath12k_peer_assoc_h_he()
Two memory copies in this function copy from a short array into a longer one,
using the wrong size, which leads to an out-of-bounds access:
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
^
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
2 errors generated.
Wen Gong [Wed, 26 Jul 2023 09:38:57 +0000 (05:38 -0400)]
wifi: ath12k: correct the data_type from QMI_OPT_FLAG to QMI_UNSIGNED_1_BYTE for mlo_capable
Currently, the encoding rule for field mlo_capable in struct
qmi_wlanfw_host_cap_req_msg_v01 defined in array
qmi_wlanfw_host_cap_req_msg_v01_ei uses type QMI_OPT_FLAG.
Unfortunately, all ath12k firmware actually expects this field to be of
type NON QMI_OPT_FLAG such as QMI_UNSIGNED_1_BYTE/QMI_UNSIGNED_8_BYTE...
And as a result, firmware is unable to correctly decode the mlo_capable
field.
Change the ath12k definition as QMI_UNSIGNED_1_BYTE to match the firmware
definition so that firmware can correctly parse the mlo_capable info from
message QMI_WLANFW_HOST_CAP_REQ_V01 at wlan load time.
This is just an accidental typo and that both WCN7850 and QCN9274 firmwares
use QMI_UNSIGNED_1_BYTE.
Wen Gong [Wed, 26 Jul 2023 09:26:25 +0000 (05:26 -0400)]
wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()
In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
In some race conditions, calibration done QMI message is received even
before host wait starts for calibration to be done.
Due to this, resetting firmware was not performed after calibration.
Hence, remove cal_done check in ath11k_qmi_fwreset_from_cold_boot()
as this is called only from probe.
wifi: ath11k: Add coldboot calibration support for QCN9074
QCN9074 supports 6 GHz, which has increased number of channels
compared to 5 GHz/2 GHz. So, to support coldboot calibration in
QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To
avoid code redundancy, fwreset_from_cold_boot moved to QMI and made
common for both ahb and pci. Coldboot calibration is enabled only in
FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot,
hence enable cbcal_restart_fw in hw_params.
This support can be enabled/disabled using hw params for different
hardware. Currently it is not enabled for QCA6390.
wifi: ath11k: fix band selection for ppdu received in channel 177 of 5 GHz
5 GHz band channel 177 support was added with the commit e5e94d10c856 ("wifi:
ath11k: add channel 177 into 5 GHz channel list"). However, during processing
for the received ppdu in ath11k_dp_rx_h_ppdu(), channel number is checked only
till 173. This leads to driver code checking for channel and then fetching the
band from it which is extra effort since firmware has already given the channel
number in the metadata.
Fix this issue by checking the channel number till 177 since we support
it now.
wifi: mwifiex: fix error recovery in PCIE buffer descriptor management
Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do
'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should
be released with 'dma_free_coherent()'. The latter is performed in
'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover
from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise
for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)'
'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.
Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230731074334.56463-1-dmantipov@yandex.ru
Drop unused and set-but-unused fields of 'struct scb_ampdu_tid_ini',
'struct scb_ampdu' and 'struct scb', as well as now unused argument
of 'brcms_c_ampdu_tx_operational()', adjust related code.
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since DEV_ASSIGN is only used by
TRACE macros and the return values are ignored.
Embed SDIO reset worker in 'struct if_sdio_card' and so
drop 'reset_host' and 'card_reset_work' static variables,
adjust related code. Not sure whether it's possible to do
something useful on 'mmc_add_host()' error, so just add
'dev_err()' to emit an error message.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Rob Herring [Mon, 24 Jul 2023 21:19:13 +0000 (15:19 -0600)]
wifi: drivers: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
In some situations like, chip wake-up with powersave enabled, SPI
commands are failing temporarily. Reissuing commands after reset helps
to overcome the failure. So, add the retry limit and reset command
sequence API for read/write SPI commands.
Polaris Pi [Sun, 23 Jul 2023 07:07:41 +0000 (07:07 +0000)]
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer.
Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211") Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com> Reviewed-by: Matthew Wang <matthewmwang@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com
wifi: rtw89: get data rate mode/NSS/MCS v1 from RX descriptor
The data rate from RX descriptor also uses hardware rate v1 for WiFi 7
chips. The rate code contains three parts -- mode, NSS and MCS. For
CCK/OFDM/HT rates, NSS/MCS parts are the same as before. VHT/HE/EHT rates
are changed and listed as below:
wifi: rtw89: add to display hardware rates v1 histogram in debugfs
The upcoming WiFi 7 chips support EHT rates, and hardware rate codes are
changed too, so modify to adapt the changes. (EHT counters are still zeros
in below example)
wifi: rtw89: add C2H RA event V1 to support WiFi 7 chips
WiFi 7 chips have more rate mode (EHT), higher MCS and more bandwidth, so
define and use reserved bits to carry these information in C2H events.
Also, the SS/MCS encoded bits of VHT and HE are changed, so define V1 masks
for them.
RA (rate adaptive), a mechanism to select proper rate, is implemented in
firmware, and this report is used to tell driver TX rate it is currently
using. Use struct to access this report, and doesn't change logic at all.
wifi: rtw89: use struct to access firmware C2H event header
Firmware C2H events contain two-word header which can indicate category,
class, function and length of received events. Use struct to access them,
and doesn't change logic at all.
wifi: rtw89: add H2C RA command V1 to support WiFi 7 chips
H2C RA V1 command adds two words to support WiFi 7 chips, which can
possibly support up to 4SS rates. Because current chips have only 2SS
rates, leave the fields blank for now. The main changes are to set
extended bits of EHT mode and bandwidth -- add a bit for EHT mode; add a
bit to enumerate 320MHz channel bandwidth.
RA (rate adaptive) H2C command is used to tell firmware which rates can
be used for specified MAC ID. Basically, this commit doesn't change result.
Only change to set two 32-bit instead of continual 8-byte rate masks one
by one. Originally, we only set 5-byte masks, because existing WiFi 6
2SS chips only need 5-byte masks. Setting two 32-bit masks will be more
efficient and also can support coming WiFi 7 2SS chips containing more
rates.
wifi: rtw89: define hardware rate v1 for WiFi 7 chips
To support EHT rate, hardware rate v1 is introduced. The CCK and OFDM rates
are persistent. HT/VHT/HE rates use different rate code from original, and
add new code for EHT rates.
wifi: rtw89: add chip_info::chip_gen to determine chip generation
The coming WiFi 7 chip is 8922AE which uses different hardware rate and
register naming rule. Adding a chip_info::chip_gen field can help to
do things by generations accordingly.
Larry Finger [Mon, 24 Jul 2023 18:39:27 +0000 (13:39 -0500)]
wifi: rtw89: Fix loading of compressed firmware
When using compressed firmware, the early firmware load feature will fail.
In most cases, the only downside is that if a device has more than one
firmware version available, only the last one listed will be loaded.
In at least two cases, there is no firmware loaded, and the device fails
initialization. See https://github.com/lwfinger/rtw89/issues/259 and
https://bugzilla.opensuse.org/show_bug.cgi?id=1212808 for examples of
the failure.
When firmware_class.dyndbg=+p" added to the kernel boot parameters, the
following is found:
finger@localhost:~/rtw89>sudo dmesg -t | grep rtw89
firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=00000000638862fb
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: Direct firmware load for rtw89/rtw8852b_fw-1.bin failed with error -2
firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=00000000638862fb data=00000000307c30c7 size=0
firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: Direct firmware load for rtw89/rtw8852b_fw.bin failed with error -2
firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb data=00000000307c30c7 size=0
rtw89_8852be 0000:02:00.0: failed to early request firmware: -2
firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/5.14.21-150500.53-default/rtw89/rtw8852b_fw.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: Loading firmware from /lib/firmware/rtw89/rtw8852b_fw.bin.xz
rtw89_8852be 0000:02:00.0: f/w decompressing rtw89/rtw8852b_fw.bin
firmware_class: fw_set_page_data: fw-rtw89/rtw8852b_fw.bin fw_priv=00000000638862fb data=000000004ed6c2f7 size=1035232
rtw89_8852be 0000:02:00.0: Firmware version 0.27.32.1, cmd version 0, type 1
rtw89_8852be 0000:02:00.0: Firmware version 0.27.32.1, cmd version 0, type 3
The key is that firmware version 0.27.32.1 is loaded.
With this patch, the following is obtained:
firmware_class: __free_fw_priv: fw-rtw89/rtw8852b_fw.bin fw_priv=000000000849addc data=00000000fd3cabe2 size=1035232
firmware_class: fw_name_devm_release: fw_name-rtw89/rtw8852b_fw.bin devm-000000002d8c3343 released
firmware_class: __allocate_fw_priv: fw-rtw89/rtw8852b_fw-1.bin fw_priv=000000009e1a6364
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/rtw89/rtw8852b_fw-1.bin.zst failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/updates/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: loading /lib/firmware/6.4.3-1-default/rtw89/rtw8852b_fw-1.bin.xz failed for no such file or directory.
rtw89_8852be 0000:02:00.0: Loading firmware from /lib/firmware/rtw89/rtw8852b_fw-1.bin.xz
rtw89_8852be 0000:02:00.0: f/w decompressing rtw89/rtw8852b_fw-1.bin
firmware_class: fw_set_page_data: fw-rtw89/rtw8852b_fw-1.bin fw_priv=000000009e1a6364 data=00000000fd3cabe2 size=1184992
rtw89_8852be 0000:02:00.0: Loaded FW: rtw89/rtw8852b_fw-1.bin, sha256: 8539efc75f513f4585cf0cd6e79e6507da47fce87225f2d0de391a03aefe9ac8
rtw89_8852be 0000:02:00.0: loaded firmware rtw89/rtw8852b_fw-1.bin
rtw89_8852be 0000:02:00.0: Firmware version 0.29.29.1, cmd version 0, type 5
rtw89_8852be 0000:02:00.0: Firmware version 0.29.29.1, cmd version 0, type 3
Now, version 0.29.29.1 is loaded.
Fixes: ffde7f3476a6 ("wifi: rtw89: add firmware format version to backward compatible with older drivers") Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230724183927.28553-1-Larry.Finger@lwfinger.net
Ryder Lee [Wed, 26 Jul 2023 18:35:06 +0000 (02:35 +0800)]
wifi: mt76: mt7915: fix power-limits while chan_switch
If user changes the channel without completely disabling the interface the
txpower_sku values reported track the old channel the device was operating on.
If user bounces the interface the correct power tables are applied.
mt7915_sku_group_len array gets updated before the channel switch happens so it
uses data from the old channel.
Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting") Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support") Reported-By: Chad Monroe <chad.monroe@smartrg.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 26 Jul 2023 18:35:05 +0000 (02:35 +0800)]
wifi: mt76: mt7915: fix tlv length of mt7915_mcu_get_chan_mib_info
Correct per-device TLV lengths to avoid invalid operation in firmware.
( 64.040375:28:STATS-E)statsGetSingleHWCounter: MIB counter index = 65472 not supported.
This happens on mt7916/mt7986.
Fixes: b0bfa00595be ("wifi: mt76: mt7915: improve accuracy of time_busy calculation") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Dmitry Antipov [Wed, 21 Jun 2023 09:36:55 +0000 (12:36 +0300)]
wifi: wil6210: fix fortify warnings
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.
Lin Ma [Sun, 23 Jul 2023 08:03:50 +0000 (16:03 +0800)]
wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH
It seems that the nla_policy in mt76_tm_policy is missed for attribute
MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make
sure the
u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]);
in function mt76_testmode_cmd() is safe and will not result in
out-of-attribute read.
Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 28 Jun 2023 07:07:17 +0000 (15:07 +0800)]
wifi: mt76: mt7921: move runtime-pm pci code in mt792x-lib
Move the following runtime-pm pci routines in mt792x-lib since they are
shared between mt7921 and mt7925 chipsets:
- __mt7921e_mcu_drv_pmctrl
- mt7921e_mcu_drv_pmctrl
- mt7921e_mcu_fw_pmctrl
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 28 Jun 2023 07:07:14 +0000 (15:07 +0800)]
wifi: mt76: mt792x: move more dma shared code in mt792x_dma
Rely on irq_map support, move more dma shared code between mt7921 and
mt7925 in mt792x_dma.c
Move the following dma code in mt792x-lib
- mt792x_dma_enable
- mt792x_dma_reset
- mt792x_wpdma_reset
- mt792x_wpdma_reinit_cond
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 25 Jul 2023 19:06:03 +0000 (21:06 +0200)]
wifi: mt76: mt7603: fix tx filter/flush function
Setting MT_TX_ABORT does not abort any transmission for a wtbl index on its
own. Instead, it modifies the behavior of a queue flush to make it selectively
flush packets for a particular wtbl index.
Adjust powersave filtering to make use of this in order to avoid running into
unnecessary timeouts while flushing
Felix Fietkau [Tue, 25 Jul 2023 10:37:59 +0000 (12:37 +0200)]
wifi: mt76: mt7603: fix beacon interval after disabling a single vif
When disabling beacons on a vif, intval is 0. Ensure that dev->mt76.beacon_int
is not overwritten in this case, so that beacons continue to work for other
interfaces.
Rafał Miłecki [Mon, 8 May 2023 15:58:20 +0000 (17:58 +0200)]
dt-bindings: mt76: support pointing to EEPROM using NVMEM cell
All kind of calibration data should be described as NVMEM cells of NVMEM
devices. That is more generic solution than "mediatek,mtd-eeprom" which
is MTD specific.
Add support for EEPROM NVMEM cells and deprecate existing MTD-based
property.
Cc: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christian Marangi [Sat, 8 Jul 2023 18:29:36 +0000 (20:29 +0200)]
wifi: mt76: add support for providing eeprom in nvmem cells
Add support for providing eeprom in nvmem cells by adding nvmem cell as
an alternative source for mt76_get_of_eeprom().
Nvmem cells will follow standard nvmem cell definition and needs to be
called 'eeprom' to be correctly identified.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christian Marangi [Sat, 8 Jul 2023 18:29:35 +0000 (20:29 +0200)]
wifi: mt76: split get_of_eeprom in subfunction
In preparation for NVMEM support, split get_of_eeprom() in subfunction
to tidy the code and facilitate the addition of alternative method to
get eeprom data. No behaviour change intended.
While at it also drop OF ifdef checks as OF have stubs and calling
of_get_property would result in the same error returned.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
projects / users / jedix / linux-maple.git / log