Currently, we may set the tunnel option flag when the size of metadata
is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function
no matter the geneve option is present or not. As this may result in
issues on the tunnel flags consumers, this patch fixes the issue.
Related discussion:
* https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u
This is an imbalance issue. The locking sequence structure
"lock_seq_stat" contains the reader counter and it is used to check if
the locking sequence is balance or not between acquiring and releasing.
If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero,
the "read_count" will be reset to zero when allocate a new structure at
the next time; thus it causes the wrong counting for reader and finally
results in imbalance issue.
To fix this issue, if detects "read_count" is not zero (means still have
read user in the locking sequence), goto the "end" tag to skip freeing
structure "lock_seq_stat".
Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for IIO_BUFFER_CB
Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
Selected by [y]:
- TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y]
The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending
on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This
can also fail building the kernel.
Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.
Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") fixed micrel phy driver adding proper support for phy
modes. Adapt imx6q-udoo board phy settings : explicitly set required
delay configuration using "rgmii-id".
Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo") Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Ethernet PHY on the Bananapi M64 has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.
Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
According to board schematic, PHY provides both, RX and TX delays.
However, according to "fix" Realtek provided for this board, only TX
delay should be provided by PHY.
Tests show that both variants work but TX only PHY delay works
slightly better.
Update ethernet node to reflect the fact that PHY provides TX delay.
__sb_start_write has some weird looking lockdep code that claims to
exist to handle nested freeze locking requests from xfs. The code as
written seems broken -- if we think we hold a read lock on any of the
higher freeze levels (e.g. we hold SB_FREEZE_WRITE and are trying to
lock SB_FREEZE_PAGEFAULT), it converts a blocking lock attempt into a
trylock.
However, it's not correct to downgrade a blocking lock attempt to a
trylock unless the downgrading code or the callers are prepared to deal
with that situation. Neither __sb_start_write nor its callers handle
this at all. For example:
sb_start_pagefault ignores the return value completely, with the result
that if xfs_filemap_fault loses a race with a different thread trying to
fsfreeze, it will proceed without pagefault freeze protection (thereby
breaking locking rules) and then unlocks the pagefault freeze lock that
it doesn't own on its way out (thereby corrupting the lock state), which
leads to a system hang shortly afterwards.
Normally, this won't happen because our ownership of a read lock on a
higher freeze protection level blocks fsfreeze from grabbing a write
lock on that higher level. *However*, if lockdep is offline,
lock_is_held_type unconditionally returns 1, which means that
percpu_rwsem_is_held returns 1, which means that __sb_start_write
unconditionally converts blocking freeze lock attempts into trylocks,
even when we *don't* hold anything that would block a fsfreeze.
Apparently this all held together until 5.10-rc1, when bugs in lockdep
caused lockdep to shut itself off early in an fstests run, and once
fstests gets to the "race writes with freezer" tests, kaboom. This
might explain the long trail of vanishingly infrequent livelocks in
fstests after lockdep goes offline that I've never been able to
diagnose.
We could fix it by spinning on the trylock if wait==true, but AFAICT the
locking works fine if lockdep is not built at all (and I didn't see any
complaints running fstests overnight), so remove this snippet entirely.
NOTE: Commit f4b554af9931 in 2015 created the current weird logic (which
used to exist in a different form in commit 5accdf82ba25c from 2012) in
__sb_start_write. XFS solved this whole problem in the late 2.6 era by
creating a variant of transactions (XFS_TRANS_NO_WRITECOUNT) that don't
grab intwrite freeze protection, thus making lockdep's solution
unnecessary. The commit claims that Dave Chinner explained that the
trylock hack + comment could be removed, but nobody ever did.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
cpu_psci_cpu_die() is called in the context of the dying CPU, which
will no longer be online or tracked by RCU. It is therefore not generally
safe to call printk() if the PSCI "cpu off" request fails, so remove the
pr_crit() invocation.
Cc: Qian Cai <cai@redhat.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20201106103602.9849-2-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.
While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The scsi_block_reqs_cnt increased in ufshcd_hold() is supposed to be
decreased back in ufshcd_ungate_work() in a paired way. However, if
specific ufshcd_hold/release sequences are met, it is possible that
scsi_block_reqs_cnt is increased twice but only one ungate work is
queued. To make sure scsi_block_reqs_cnt is handled by ufshcd_hold() and
ufshcd_ungate_work() in a paired way, increase it only if queue_work()
returns true.
Link: https://lore.kernel.org/r/1604384682-15837-2-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
in net/core/dev.c due to still having the NC-SI packet handler
registered.
Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a user unbinds and re-binds a NC-SI aware driver the kernel will
attempt to register the netlink interface at runtime. The structure is
marked __ro_after_init so registration fails spectacularly at this point.
Jakub pointed out that ncsi_register_dev is obviously broken, because
there is only one family so it would never work if there was more than
one ncsi netdev.
Fix the crash by registering the netlink family once on boot, and drop
the code to unregister it.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when QoS is enabled for VF and any min_rate is configured,
the driver sets bw_share value to at least 1 and doesn’t allow to set
it to 0 to make minimal rate unlimited. It means there is always a
minimal rate configured for every VF, even if user tries to remove it.
In order to make QoS disable possible, check whether all vports have
configured min_rate = 0. If this is true, set their bw_share to 0 to
disable min_rate limitations.
Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During loss recovery, retransmitted packets are forced to use TCP
timestamps to calculate the RTT samples, which have a millisecond
granularity. BBR is designed using a microsecond granularity. As a
result, multiple RTT samples could be truncated to the same RTT value
during loss recovery. This is problematic, as BBR will not enter
PROBE_RTT if the RTT sample is <= the current min_rtt sample, meaning
that if there are persistent losses, PROBE_RTT will constantly be
pushed off and potentially never re-entered. This patch makes sure
that BBR enters PROBE_RTT by checking if RTT sample is < the current
min_rtt sample, rather than <=.
The Netflix transport/TCP team discovered this bug in the Linux TCP
BBR code during lab tests.
This is because it holds asoc when transport->proto_unreach_timer starts
and puts asoc when the timer stops, and without holding transport the
transport could be freed when the timer is still running.
So fix it by holding/putting transport instead for proto_unreach_timer
in transport, just like other timers in transport.
v1->v2:
- Also use sctp_transport_put() for the "out_unlock:" path in
sctp_generate_proto_unreach_event(), as Marcelo noticed.
Fixes: 50b5d6ad6382 ("sctp: Fix a race between ICMP protocol unreachable and connect()") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 469981b17a4f ("qed: Add unaligned and packed packet processing") Fixes: fcb39f6c10b2 ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus") Fixes: 1e28eaad07ea ("qed: Add iWARP support for fpdu spanned over more than two tcp packets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/1605532033-27373-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb().
This ends up to page_frag_alloc() to allocate skb->data from
page_frag_cache->va.
During the memory pressure, page_frag_cache->va may be allocated as
pfmemalloc page. As a result, the skb->pfmemalloc is always true as
skb->data is from page_frag_cache->va. The skb will be dropped if the
sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour
under memory pressure.
However, once kernel is not under memory pressure any longer (suppose large
amount of memory pages are just reclaimed), the page_frag_alloc() may still
re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a
result, the skb->pfmemalloc is always true unless page_frag_cache->va is
re-allocated, even if the kernel is not under memory pressure any longer.
Here is how kernel runs into issue.
1. The kernel is under memory pressure and allocation of
PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead,
the pfmemalloc page is allocated for page_frag_cache->va.
2: All skb->data from page_frag_cache->va (pfmemalloc) will have
skb->pfmemalloc=true. The skb will always be dropped by sock without
SOCK_MEMALLOC. This is an expected behaviour.
3. Suppose a large amount of pages are reclaimed and kernel is not under
memory pressure any longer. We expect skb->pfmemalloc drop will not happen.
4. Unfortunately, page_frag_alloc() does not proactively re-allocate
page_frag_alloc->va and will always re-use the prior pfmemalloc page. The
skb->pfmemalloc is always true even kernel is not under memory pressure any
longer.
Fix this by freeing and re-allocating the page instead of recycling it.
References: https://lore.kernel.org/lkml/20201103193239.1807-1-dongli.zhang@oracle.com/
References: https://lore.kernel.org/linux-mm/20201105042140.5253-1-willy@infradead.org/ Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Cc: Bert Barbe <bert.barbe@oracle.com> Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Cc: Manjunath Patil <manjunath.b.patil@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: SRINIVAS <srinivas.eeda@oracle.com> Fixes: 79930f5892e1 ("net: do not deplete pfmemalloc reserve") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201115201029.11903-1-dongli.zhang@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The x25_disconnect function in x25_subr.c would decrease the refcount of
"x25->neighbour" (struct x25_neigh) and reset this pointer to NULL.
However, the x25_rx_call_request function in af_x25.c, which is called
when we receive a connection request, does not increase the refcount when
it assigns the pointer.
Fix this issue by increasing the refcount of "struct x25_neigh" in
x25_rx_call_request.
This patch fixes frequent kernel crashes when using AF_X25 sockets.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During rmnet unregistration, the real device rx_handler is first cleared
followed by the removal of rx_handler_data after the rcu synchronization.
Any packets in the receive path may observe that the rx_handler is NULL.
However, there is no check when dereferencing this value to use the
rmnet_port information.
This fixes following splat by adding the NULL check.
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000000d
pc : rmnet_rx_handler+0x124/0x284
lr : rmnet_rx_handler+0x124/0x284
rmnet_rx_handler+0x124/0x284
__netif_receive_skb_core+0x758/0xd74
__netif_receive_skb+0x50/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
Slave function read the following capabilities from the wrong offset:
1. log_mc_entry_sz
2. fs_log_entry_sz
3. log_mc_hash_sz
Fix that by adjusting these capabilities offset to match firmware
layout.
Due to the wrong offset read, the following issues might occur:
1+2. Negative value reported at max_mcast_qp_attach.
3. Driver to init FW with multicast hash size of zero.
Fixes: a40ded604365 ("net/mlx4_core: Add masking for a few queries on HCA caps") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20201118081922.553-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current NetLabel code doesn't correctly keep track of the netlink
dump state in some cases, in particular when multiple interfaces with
large configurations are loaded. The problem manifests itself by not
reporting the full configuration to userspace, even though it is
loaded and active in the kernel. This patch fixes this by ensuring
that the dump state is properly reset when necessary inside the
netlbl_unlabel_staticlist() function.
Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DSA network devices rely on having their DSA management interface up and
running otherwise their ndo_open() will return -ENETDOWN. Without doing
this it would not be possible to use DSA devices as netconsole when
configured on the command line. These devices also do not utilize the
upper/lower linking so the check about the netpoll device having upper
is not going to be a problem.
The solution adopted here is identical to the one done for
net/ipv4/ipconfig.c with 728c02089a0e ("net: ipv4: handle DSA enabled
master network devices"), with the network namespace scope being
restricted to that of the process configuring netpoll.
As soon as you add the second port to a VLAN, all other port
membership configuration is overwritten with zeroes. The HW interprets
this as all ports being "unmodified members" of the VLAN.
In the simple case when all ports belong to the same VLAN, switching
will still work. But using multiple VLANs or trying to set multiple
ports as tagged members will not work.
On the 6352, doing a VTU GetNext op, followed by an STU GetNext op
will leave you with both the member- and state- data in the VTU/STU
data registers. But on the 6097 (which uses the same implementation),
the STU GetNext will override the information gathered from the VTU
GetNext.
Separate the two stages, parsing the result of the VTU GetNext before
doing the STU GetNext.
We opt to update the existing implementation for all applicable chips,
as opposed to creating a separate callback for 6097, because although
the previous implementation did work for (at least) 6352, the
datasheet does not mention the masking behavior.
Fixes: ef6fcea37f01 ("net: dsa: mv88e6xxx: get STU entry on VTU GetNext") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20201112114335.27371-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 39a6f4bce6b4 ("b44: replace the ssb_dma API with the generic DMA API") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver sends Ethernet Management Datagram (EMAD) packets to the
device for configuration purposes and waits for up to 200ms for a reply.
A request is retried up to 5 times.
When the system is under heavy load, replies are not always processed in
time and EMAD transactions fail.
Make the process more robust to such delays by using exponential
backoff. First wait for up to 200ms, then retransmit and wait for up to
400ms and so on.
On arm imx6, when opening the chip's netdev, the whole Linux
kernel intermittently hangs/freezes.
This is caused by a bug in the driver code which tests if pcie
interrupts are working correctly, using the software interrupt:
1. open: enable the software interrupt
2. open: tell the chip to assert the software interrupt
3. open: wait for flag
4. ISR: acknowledge s/w interrupt, set flag
5. open: notice flag, disable the s/w interrupt, continue
Unfortunately the ISR only acknowledges the s/w interrupt, but
does not disable it. This will re-trigger the ISR in a tight
loop.
On some (lucky) platforms, open proceeds to disable the s/w
interrupt even while the ISR is 'spinning'. On arm imx6,
the spinning ISR does not allow open to proceed, resulting
in a hung Linux kernel.
Fix minimally by disabling the s/w interrupt in the ISR, which
will prevent it from spinning. This won't break anything because
the s/w interrupt is used as a one-shot interrupt.
Note that this is a minimal fix, overlooking many possible
cleanups, e.g.:
- lan743x_intr_software_isr() is completely redundant and reads
INT_STS twice for no apparent reason
- disabling the s/w interrupt in lan743x_intr_test_isr() is now
redundant, but harmless
- waiting on software_isr_flag can be converted from a sleeping
poll loop to wait_event_timeout()
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # arm imx6 lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112204741.12375-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running this chip on arm imx6, we intermittently observe
the following kernel warning in the log, especially when the
system is under high load:
[ 50.119484] ------------[ cut here ]------------
[ 50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169 __local_bh_enable_ip+0x100/0x184
[ 50.132925] IRQs not enabled as expected
[ 50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1
[ 50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 50.171395] [<c0111a38>] (unwind_backtrace) from [<c010be28>] (show_stack+0x10/0x14)
[ 50.179162] [<c010be28>] (show_stack) from [<c05b9dec>] (dump_stack+0xac/0xd8)
[ 50.186408] [<c05b9dec>] (dump_stack) from [<c0122e40>] (__warn+0xd0/0x10c)
[ 50.193391] [<c0122e40>] (__warn) from [<c0123238>] (warn_slowpath_fmt+0x98/0xc4)
[ 50.200892] [<c0123238>] (warn_slowpath_fmt) from [<c012b010>] (__local_bh_enable_ip+0x100/0x184)
[ 50.209860] [<c012b010>] (__local_bh_enable_ip) from [<bf09ecbc>] (destroy_conntrack+0x48/0xd8 [nf_conntrack])
[ 50.220038] [<bf09ecbc>] (destroy_conntrack [nf_conntrack]) from [<c0ac9b58>] (nf_conntrack_destroy+0x94/0x168)
[ 50.230160] [<c0ac9b58>] (nf_conntrack_destroy) from [<c0a4aaa0>] (skb_release_head_state+0xa0/0xd0)
[ 50.239314] [<c0a4aaa0>] (skb_release_head_state) from [<c0a4aadc>] (skb_release_all+0xc/0x24)
[ 50.247946] [<c0a4aadc>] (skb_release_all) from [<c0a4b4cc>] (consume_skb+0x74/0x17c)
[ 50.255796] [<c0a4b4cc>] (consume_skb) from [<c081a2dc>] (lan743x_tx_release_desc+0x120/0x124)
[ 50.264428] [<c081a2dc>] (lan743x_tx_release_desc) from [<c081a98c>] (lan743x_tx_napi_poll+0x5c/0x18c)
[ 50.273755] [<c081a98c>] (lan743x_tx_napi_poll) from [<c0a6b050>] (net_rx_action+0x118/0x4a4)
[ 50.282306] [<c0a6b050>] (net_rx_action) from [<c0101364>] (__do_softirq+0x13c/0x53c)
[ 50.290157] [<c0101364>] (__do_softirq) from [<c012b29c>] (irq_exit+0x150/0x17c)
[ 50.297575] [<c012b29c>] (irq_exit) from [<c0196a08>] (__handle_domain_irq+0x60/0xb0)
[ 50.305423] [<c0196a08>] (__handle_domain_irq) from [<c05d44fc>] (gic_handle_irq+0x4c/0x90)
[ 50.313790] [<c05d44fc>] (gic_handle_irq) from [<c0100ed4>] (__irq_usr+0x54/0x80)
[ 50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8)
[ 50.326355] 9fa0: 1cf1aa74000000010000000100000000
[ 50.334547] 9fc0: 00000001000000000000000000000000000000000000000000004097b6d17d14
[ 50.342738] 9fe0: 00000001b6d17c6000000000b6e71f94800b0010ffffffff
[ 50.349364] irq event stamp: 2525027
[ 50.352955] hardirqs last enabled at (2525026): [<c0a6afec>] net_rx_action+0xb4/0x4a4
[ 50.360892] hardirqs last disabled at (2525027): [<c0d6d2fc>] _raw_spin_lock_irqsave+0x1c/0x50
[ 50.369517] softirqs last enabled at (2524660): [<c01015b4>] __do_softirq+0x38c/0x53c
[ 50.377446] softirqs last disabled at (2524693): [<c012b29c>] irq_exit+0x150/0x17c
[ 50.385027] ---[ end trace c0b571db4bc8087d ]---
The driver is calling dev_kfree_skb() from code inside a spinlock,
where h/w interrupts are disabled. This is forbidden, as documented
in include/linux/netdevice.h. The correct function to use
dev_kfree_skb_irq(), or dev_kfree_skb_any().
Fix by using the correct dev_kfree_skb_xxx() functions:
in lan743x_tx_release_desc():
called by lan743x_tx_release_completed_descriptors()
called by in lan743x_tx_napi_poll()
which holds a spinlock
called by lan743x_tx_release_all_descriptors()
called by lan743x_tx_close()
which can-sleep
conclusion: use dev_kfree_skb_any()
in lan743x_tx_xmit_frame():
which holds a spinlock
conclusion: use dev_kfree_skb_irq()
in lan743x_tx_close():
which can-sleep
conclusion: use dev_kfree_skb()
in lan743x_rx_release_ring_element():
called by lan743x_rx_close()
which can-sleep
called by lan743x_rx_open()
which can-sleep
conclusion: use dev_kfree_skb()
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112185949.11315-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nlmsg_cancel() needs to be called in the error path of
inet_req_diag_fill to cancel the message.
Fixes: d545caca827b ("net: inet: diag: expose the socket mark to privileged processes.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201116082018.16496-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module eeprom address range returned by bnxt_get_module_eeprom()
should be 256 bytes of A0h address space, the lower half of the A2h
address space, and page 0 for the upper half of the A2h address space.
Fix the firmware call by passing page_number 0 for the A2h slave address
space.
Fixes: 42ee18fe4ca2 ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case
push_scqe() fails to submit the `skb'. The memory of the `skb' is
released so only the DMA mapping is leaking.
Unmap the DMA mapping in case push_scqe() failed.
Fixes: 864a3ff635fa7 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. It turns out that gsi is an
int. Fixes:
drivers/acpi/evged.c:105:48: warning: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Wformat]
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
^~~
Link: https://github.com/ClangBuiltLinux/linux/issues/378 Fixes: ea6f3af4c5e6 ("ACPI: GED: add support for _Exx / _Lxx handler methods") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When (for example) an IBSS station is pre-moved to AUTHORIZED
before it's inserted, and then the insertion fails, we don't
clean up the fast RX/TX states that might already have been
created, since we don't go through all the state transitions
again on the way down.
Do that, if it hasn't been done already, when the station is
freed. I considered only freeing the fast TX/RX state there,
but we might add more state so it's more robust to wind down
the state properly.
Note that we warn if the station was ever inserted, it should
have been properly cleaned up in that case, and the driver
will probably not like things happening out of order.
The original commit introduces a build failure as seen on Debian buster
when compiled with gcc (Debian 8.3.0-6) 8.3.0:
$ LC_ALL=C.UTF-8 ARCH=x86 make perf
[...]
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
CC util/cs-etm-decoder/cs-etm-decoder.o
CC util/intel-pt.o
util/cs-etm-decoder/cs-etm-decoder.c: In function 'cs_etm_decoder__buffer_packet':
util/cs-etm-decoder/cs-etm-decoder.c:287:24: error: 'traceid_list' undeclared (first use in this function); did you mean 'trace_event'?
inode = intlist__find(traceid_list, trace_chan_id);
^~~~~~~~~~~~
trace_event
util/cs-etm-decoder/cs-etm-decoder.c:287:24: note: each undeclared identifier is reported only once for each function it appears in
make[6]: *** [/build/linux-stable/tools/build/Makefile.build:97: util/cs-etm-decoder/cs-etm-decoder.o] Error 1
make[5]: *** [/build/linux-stable/tools/build/Makefile.build:139: cs-etm-decoder] Error 2
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [/build/linux-stable/tools/build/Makefile.build:139: util] Error 2
make[3]: *** [Makefile.perf:633: libperf-in.o] Error 2
make[2]: *** [Makefile.perf:206: sub-make] Error 2
make[1]: *** [Makefile:70: all] Error 2
make: *** [Makefile:77: perf] Error 2
Link: https://lore.kernel.org/stable/20201114083501.GA468764@eldamar.lan/ Cc: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Tor Jeremiassen <tor@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # 4.19.y Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get/put_user() can be called with nontrivial arguments. fs/proc/page.c
has a good example:
if (put_user(stable_page_flags(ppage), out)) {
stable_page_flags() is quite a lot of code, including spin locks in
the page allocator.
Ensure these arguments are evaluated before user access is allowed.
This improves security by reducing code with access to userspace, but
it also fixes a PREEMPT bug with KUAP on powerpc/64s:
stable_page_flags() is currently called with AMR set to allow writes,
it ends up calling spin_unlock(), which can call preempt_schedule. But
the task switch code can not be called with AMR set (it relies on
interrupts saving the register), so this blows up.
It's fine if the code inside allow_user_access() is preemptible,
because a timer or IPI will save the AMR, but it's not okay to
explicitly cause a reschedule.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200407041245.600651-1-npiggin@gmail.com Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KUAP implementation adds calls in clear_user() to enable and
disable access to userspace memory. However, it doesn't add these to
__clear_user(), which is used in the ptrace regset code.
As there's only one direct user of __clear_user() (the regset code),
and the time taken to set the AMR for KUAP purposes is going to
dominate the cost of a quick access_ok(), there's not much point
having a separate path.
Rename __clear_user() to __arch_clear_user(), and make __clear_user()
just call clear_user().
Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com Reported-by: Daniel Axtens <dja@axtens.net> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Use __arch_clear_user() for the asm version like arm64 & nds32] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Thu, 19 Nov 2020 23:41:59 +0000 (10:41 +1100)]
powerpc: Add a framework for user access tracking
Backported from commit de78a9c42a79 ("powerpc: Add a framework
for Kernel Userspace Access Protection"). Here we don't try to
add the KUAP framework, we just want the helper functions
because we want to put uaccess flush helpers in them.
In terms of fixes, we don't need commit 1d8f739b07bd ("powerpc/kuap:
Fix set direction in allow/prevent_user_access()") as we don't have
real KUAP. Likewise as all our allows are noops and all our prevents
are just flushes, we don't need commit 9dc086f1e9ef ("powerpc/futex:
Fix incorrect user access blocking") The other 2 fixes we do need.
The original description is:
This patch implements a framework for Kernel Userspace Access
Protection.
Then subarches will have the possibility to provide their own
implementation by providing setup_kuap() and
allow/prevent_user_access().
Some platforms will need to know the area accessed and whether it is
accessed from read, write or both. Therefore source, destination and
size and handed over to the two functions.
mpe: Rename to allow/prevent rather than unlock/lock, and add
read/write wrappers. Drop the 32-bit code for now until we have an
implementation for it. Add kuap to pt_regs for 64-bit as well as
32-bit. Don't split strings, use pr_crit_ratelimited().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When converting trailing spaces and periods in paths, do so
for every component of the path, not just the last component.
If the conversion is not done for every path component, then
subsequent operations in directories with trailing spaces or
periods (e.g. create(), mkdir()) will fail with ENOENT. This
is because on the server, the directory will have a special
symbol in its name, and the client needs to provide the same.
Signed-off-by: Boris Protopopov <pboris@amazon.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunsheng Lin [Tue, 3 Nov 2020 03:25:38 +0000 (11:25 +0800)]
net: sch_generic: fix the missing new qdisc assignment bug
When commit 2fb541c862c9 ("net: sch_generic: aviod concurrent reset and
enqueue op for lockless qdisc") is backported to stable kernel, one
assignment is missing, which causes two problems reported by Joakim and
Vishwanath, see [1] and [2].
Fixes: 749cc0b0c7f3 ("net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:
kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g. simple_strtoul("123xyx") = 123.
The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.
Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[sudip: use reboot_mode instead of mode] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a possible race in perf_mmap_close() when checking ring buffer's
mmap_count refcount value. The problem is that the mmap_count check is
not atomic because we call atomic_dec() and atomic_read() separately.
perf_mmap_close:
...
atomic_dec(&rb->mmap_count);
...
if (atomic_read(&rb->mmap_count))
goto out_put;
<ring buffer detach>
free_uid
out_put:
ring_buffer_put(rb); /* could be last */
The race can happen when we have two (or more) events sharing same ring
buffer and they go through atomic_dec() and then they both see 0 as refcount
value later in atomic_read(). Then both will go on and execute code which
is meant to be run just once.
The code that detaches ring buffer is probably fine to be executed more
than once, but the problem is in calling free_uid(), which will later on
demonstrate in related crashes and refcount warnings, like:
condition leads to a return before the task flag is set. Similarly,
ib_prctl_get() will return PR_SPEC_DISABLE even though IBPB is set to
conditional.
More generally, the following cases are possible:
1. STIBP = conditional && IBPB = on for spectre_v2_user=seccomp,ibpb
2. STIBP = on && IBPB = conditional for AMD CPUs with
X86_FEATURE_AMD_STIBP_ALWAYS_ON
The first case functions correctly today, but only because
spectre_v2_user_ibpb isn't updated to reflect the IBPB mode.
At a high level, this change does one thing. If either STIBP or IBPB
is set to conditional, allow the prctl to change the task flag.
Also, reflect that capability when querying the state. This isn't
perfect since it doesn't take into account if only STIBP or IBPB is
unconditionally on. But it allows the conditional feature to work as
expected, without affecting the unconditional one.
[ bp: Massage commit message and comment; space out statements for
better readability. ]
Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20201105163246.v2.1.Ifd7243cd3e2c2206a893ad0a5b9a4f19549e22c6@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
[wt: backported to 4.19 -- various context adjustments] Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The caller of rtl8169_tso_csum_v2() frees the skb if false is returned.
eth_skb_pad() internally frees the skb on error what would result in a
double free. Therefore use __skb_put_padto() directly and instruct it
to not free the skb on error.
Fixes: b423e9ae49d7 ("r8169: fix offloaded tx checksum for small packets.") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.
Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.
Fixes: dcdd43c41e60 ("net: vrf: performance improvements for IPv4") Fixes: a9ec54d1b0cd ("net: vrf: performance improvements for IPv6") Signed-off-by: Martin Willi <martin@strongswan.org> Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'srv' is malloced in tipc_topsrv_start() but not free before
leaving from the error handling cases. We need to free it.
Fixes: 5c45ab24ac77 ("tipc: make struct tipc_server private for server.c") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a regression for blocking connects introduced by commit 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect").
The x25->neighbour is already set to "NULL" by x25_disconnect() now,
while a blocking connect is waiting in
x25_wait_for_connection_establishment(). Therefore x25->neighbour must
not be accessed here again and x25->state is also already set to
X25_STATE_0 by x25_disconnect().
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.
Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt") Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
Read of size 2 at addr 000000000000021e by task syz-executor907/519
There is nothing to shutdown if a connection has never been established.
Besides that iucv->hs_dev is not yet initialized if a socket is in
IUCV_OPEN state and iucv->path is not yet initialized if socket is in
IUCV_BOUND state.
So, just skip the shutdown calls for a socket in these states.
Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.
As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.
This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling
memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
If the allocation must fail, no_iotlb_memory is set.
Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.
When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.
Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.
Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.
Fixes: ac2cbab21f31 ("x86: Don't panic if can not alloc buffer for swiotlb") Reported-by: Elliott Mitchell <ehem+xen@m5p.com> Tested-by: Elliott Mitchell <ehem+xen@m5p.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EROFS has _only one_ ondisk timestamp (ctime is currently
documented and recorded, we might also record mtime instead
with a new compat feature if needed) for each extended inode
since EROFS isn't mainly for archival purposes so no need to
keep all timestamps on disk especially for Android scenarios
due to security concerns. Also, romfs/cramfs don't have their
own on-disk timestamp, and squashfs only records mtime instead.
Let's also derive access time from ondisk timestamp rather than
leaving it empty, and if mtime/atime for each file are really
needed for specific scenarios as well, we can also use xattrs
to record them then.
Link: https://lore.kernel.org/r/20201031195102.21221-1-hsiangkao@aol.com
[ Gao Xiang: It'd be better to backport for user-friendly concern. ] Fixes: 431339ba9042 ("staging: erofs: add inode operations") Cc: stable <stable@vger.kernel.org> # 4.19+ Reported-by: nl6720 <nl6720@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com>
[ Gao Xiang: Manually backport to 4.19.y due to trivial conflicts. ] Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RTC is 32.768kHz thus 512 RtcClk equals 15625 usec. The documentation
likely has dropped precision and that's why the driver mistakenly took
the slightly deviated value.
Cc: stable@vger.kernel.org Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/2f4706a1-502f-75f0-9596-cc25b4933b6c@redhat.com/ Link: https://lore.kernel.org/r/20201105231912.69527-3-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gma500 driver expects 3 pipelines in several it's IRQ functions.
Accessing struct drm_device.vblank[], this fails with devices that only
have 2 pipelines. An example KASAN report is shown below.
Coredump logics needs to report not only the registers of the dumping
thread, but (since 2.5.43) those of other threads getting killed.
Doing that might require extra state saved on the stack in asm glue at
kernel entry; signal delivery logics does that (we need to be able to
save sigcontext there, at the very least) and so does seccomp.
That covers all callers of do_coredump(). Secondary threads get hit with
SIGKILL and caught as soon as they reach exit_mm(), which normally happens
in signal delivery, so those are also fine most of the time. Unfortunately,
it is possible to end up with secondary zapped when it has already entered
exit(2) (or, worse yet, is oopsing). In those cases we reach exit_mm()
when mm->core_state is already set, but the stack contents is not what
we would have in signal delivery.
At least on two architectures (alpha and m68k) it leads to infoleaks - we
end up with a chunk of kernel stack written into coredump, with the contents
consisting of normal C stack frames of the call chain leading to exit_mm()
instead of the expected copy of userland registers. In case of alpha we
leak 312 bytes of stack. Other architectures (including the regset-using
ones) might have similar problems - the normal user of regsets is ptrace
and the state of tracee at the time of such calls is special in the same
way signal delivery is.
Note that had the zapper gotten to the exiting thread slightly later,
it wouldn't have been included into coredump anyway - we skip the threads
that have already cleared their ->mm. So let's pretend that zapper always
loses the race. IOW, have exit_mm() only insert into the dumper list if
we'd gotten there from handling a fatal signal[*]
As the result, the callers of do_exit() that have *not* gone through get_signal()
are not seen by coredump logics as secondary threads. Which excludes voluntary
exit()/oopsen/traps/etc. The dumper thread itself is unaffected by that,
so seccomp is fine.
[*] originally I intended to add a new flag in tsk->flags, but ebiederman pointed
out that PF_SIGNALED is already doing just what we need.
The commit 94b110aff867 ("mmc: tmio: add tmio_mmc_host_alloc/free()")
added tmio_mmc_host_free(), but missed the function calling in
the sh_mobile_sdhi_remove() at that time. So, fix it. Otherwise,
we cannot rebind the sdhi/mmc devices when we use aliases of mmc.
Fix to return a negative error code from the error handling case
instead of 0 in function sel_ib_pkey_sid_slow(), as done elsewhere
in this function.
Cc: stable@vger.kernel.org Fixes: 409dcf31538a ("selinux: Add a cache for quicker retreival of PKey SIDs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: stable@vger.kernel.org # 4.4+ Fixes: df480633b891 ("btrfs: extent-tree: Switch to new delalloc space reserve and release") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Sterba <dsterba@suse.com>
[ define the variable instead of repeating the shift ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The above stack is not reasonable, the final iput shouldn't happen in
ocfs2_orphan_filldir() function. Looking at the code,
2067 /* Skip inodes which are already added to recover list, since dio may
2068 * happen concurrently with unlink/rename */
2069 if (OCFS2_I(iter)->ip_next_orphan) {
2070 iput(iter);
2071 return 0;
2072 }
2073
The logic thinks the inode is already in recover list on seeing
ip_next_orphan is non-NULL, so it skip this inode after dropping a
reference which incremented in ocfs2_iget().
While, if the inode is already in recover list, it should have another
reference and the iput() at line 2070 should not be the final iput
(dropping the last reference). So I don't think the inode is really in
the recover list (no vmcore to confirm).
Note that ocfs2_queue_orphans(), though not shown up in the call back
trace, is holding cluster lock on the orphan directory when looking up
for unlinked inodes. The on disk inode eviction could involve a lot of
IOs which may need long time to finish. That means this node could hold
the cluster lock for very long time, that can lead to the lock requests
(from other nodes) to the orhpan directory hang for long time.
Looking at more on ip_next_orphan, I found it's not initialized when
allocating a new ocfs2_inode_info structure.
This causes te reflink operations from some nodes hang for very long
time waiting for the cluster lock on the orphan directory.
Fix: initialize ip_next_orphan as NULL.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201109171746.27884-1-wen.gang.wang@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A receive callback is queued while the client is still connected
but can still be called after the client was disconnected. Upon
disconnect cl->me_cl is set to NULL, hence we need to check
that ME client is not-NULL in mei_cl_mtu to avoid
null dereference.
pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. We should decrease the usage count
whetever it succeeded or failed(maybe runtime of the device has
error, or device is in inaccessible state, or other error state).
If we do not call put operation to decrease the reference, it will
result in reference leak in xhci_histb_probe. Moreover, this
device cannot enter the idle state and always stay busy or other
non-idle state later. So we fixed it by jumping to error handling
branch.
Renesas R-Car and RZ/G SoCs have a firmware download mode over USB.
However, on reset a banner string is transmitted out which is not expected
to be echoed back and will corrupt the protocol.
Commit 8fd0e2a6df26 ("uio: free uio id after uio file node is freed")
triggered KASAN use-after-free failure at deletion of TCM-user
backstores [1].
In uio_unregister_device(), struct uio_device *idev is passed to
uio_free_minor() to refer idev->minor. However, before uio_free_minor()
call, idev is already freed by uio_device_release() during call to
device_unregister().
To avoid reference to idev->minor after idev free, keep idev->minor
value in a local variable. Also modify uio_free_minor() argument to
receive the value.
[1]
BUG: KASAN: use-after-free in uio_unregister_device+0x166/0x190
Read of size 4 at addr ffff888105196508 by task targetcli/49158
The svc->key field is not released as it should be if ida_simple_get()
fails so fix that.
Fixes: 9aabb68568b4 ("thunderbolt: Fix to check return value of ida_simple_get") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
projects / users / dwmw2 / linux.git / log