Dmitry Torokhov [Fri, 11 Nov 2022 22:19:07 +0000 (14:19 -0800)]
gpiolib: consolidate GPIO lookups
Ensure that all paths to obtain/look up GPIOD from generic
consumer-visible APIs go through the new gpiod_find_and_request()
helper, so that we can easily extend it with support for new firmware
mechanisms.
The only exception is OF-specific [devm_]gpiod_get_from_of_node() API
that is still being used by a couple of drivers and will be removed as
soon as patches converting them to use generic fwnode/device APIs are
accepted.
Dmitry Torokhov [Fri, 11 Nov 2022 22:19:05 +0000 (14:19 -0800)]
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
In preparation of switching all ACPI-based GPIO lookups to go through
acpi_find_gpio() we need to make sure it can handle data-only ACPI
nodes, same as existing acpi_node_get_gpiod().
Dmitry Torokhov [Fri, 11 Nov 2022 22:19:04 +0000 (14:19 -0800)]
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
In preparation of switching all ACPI-based GPIO lookups to go through
acpi_find_gpio() let's change it to accept device node as its argument
as we do not always have access to device structure.
Dmitry Torokhov [Tue, 15 Nov 2022 10:16:24 +0000 (11:16 +0100)]
gpiolib: of: change of_find_gpio() to accept device node
In preparation of switching all OF-based GPIO lookups to go through
of_find_gpio() let's change it to accept device node as its argument as
we do not always have access to device structure.
Dmitry Torokhov [Sun, 30 Oct 2022 04:40:47 +0000 (21:40 -0700)]
gpiolib: of: add polarity quirk for Freescale PCIe controller
Bindings for Freescale PCIe controller use a separate property called
"reset-gpio-active-high" to control polarity of its reset line, add it
to the list of quirks in gpiolib so that gpiod API can be used in the
driver.
Dmitry Torokhov [Sun, 30 Oct 2022 04:40:46 +0000 (21:40 -0700)]
gpiolib: of: factor out quirk setting polarity via separate property
Several legacy bindings use a separate property to specify polarity of
GPIOs instead of specifying it directly in the GPIO property. Factor
out this code to make it easier to add more such cases.
Shubhrajyoti Datta [Wed, 26 Oct 2022 15:15:43 +0000 (20:45 +0530)]
gpio: pca9570: add slg7xl45106 support
Dialog semiconductors SLG7XL45106 is an 8-bit I2C GPO expander.
The output port is controlled by a data byte with register
address. Add a compatible string for the same. Also update
the driver to write and read from it.
Andy Shevchenko [Mon, 17 Oct 2022 17:06:00 +0000 (20:06 +0300)]
gpio: exar: Allow IO port access
It's possible that PCI device can provide an IO port resource for
the device. regmap MMIO currently uses MMIO by default. With an
additional flag we enable support for IO port accesses.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Sascha Hauer [Fri, 7 Oct 2022 11:46:46 +0000 (13:46 +0200)]
gpio: Add gpio latch driver
This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
gpio: idio-16: Introduce the ACCES IDIO-16 GPIO library module
Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.
A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Jeremy Kerr [Mon, 24 Oct 2022 08:08:28 +0000 (16:08 +0800)]
gpio: ftgpio010: use device name for gpiochip name & label
Currently, we use just the fixed string "FTGPIO010" as the gpiochip name
for ftgpio010 drivers. Because it's fixed, this means we cannot
distinguish multiple ftgpio010 devices present on a single system.
This change uses the dev_name() instead, which should be unique between
multiple instances.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:11 +0000 (22:41 -0700)]
gpiolib: of: add a quirk for reset line polarity for Himax LCDs
Existing DTS that use legacy (non-standard) property name for the reset
line "gpios-reset" also specify incorrect polarity (0 which maps to
"active high"). Add a quirk to force polarity to "active low" so that
once driver is converted to gpiod API that pays attention to line
polarity it will work properly.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:10 +0000 (22:41 -0700)]
gpiolib: of: add quirk for phy reset polarity for Freescale Ethernet
Bindings for Freescale Fast Ethernet Controller use a separate
property "phy-reset-active-high" to specify polarity of its phy
gpio line. To allow converting the driver to gpiod API we need
to add this quirk to gpiolib.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:08 +0000 (22:41 -0700)]
gpiolib: of: add a quirk for legacy names in MOXA ART RTC
The driver is using non-standard "gpio-rtc-data", "gpio-rtc-sclk", and
"gpio-rtc-reset" names for properties describing its gpios. In
preparation to converting to the standard naming ("rtc-*-gpios") and
switching the driver to gpiod API add a quirk to gpiolib to keep
compatibility with existing DTSes.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:07 +0000 (22:41 -0700)]
gpiolib: of: add a quirk for reset line for Cirrus CS42L56 codec
The controller is using non-standard "cirrus,gpio-nreset" name for its
reset gpio property, whereas gpiod API expects "<name>-gpios".
Add a quirk so that gpiod API will still work on unmodified DTSes.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:06 +0000 (22:41 -0700)]
gpiolib: of: add a quirk for reset line for Marvell NFC controller
The controller is using non-standard "reset-n-io" name for its reset
gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk
so that gpiod API will still work on unmodified DTSes.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:03 +0000 (22:41 -0700)]
gpiolib: of: consolidate simple renames into a single quirk
This consolidates all quirks doing simple renames (either allowing
suffix-less names or trivial renames, when index changes are not
required) into a single quirk.
Dmitry Torokhov [Tue, 18 Oct 2022 05:41:02 +0000 (22:41 -0700)]
gpiolib: of: add a quirk for legacy names in Mediatek mt2701-cs42448
The driver is using non-standard "i2s1-in-sel-gpio1" and
"i2s1-in-sel-gpio2" names to describe its gpios. In preparation to
converting to the standard naming (i2s1-in-sel-gpios) and switching the
driver to gpiod API add a quirk to gpiolib to keep compatibility with
existing DTSes.
Documentation: gpio: Remove text about ARCH_NR_GPIOS
ARCH_NR_GPIOS have been removed, clean up the documentation.
After this patch, the only place when ARCH_NR_GPIOS remains is in
translations/zh_CN/gpio.txt and translations/zh_TW/gpio.txt.
I don't have the skills to update that, anyway those two files are
already out of sync as they are still mentionning ARCH_REQUIRE_GPIOLIB
which was removed by commit 65053e1a7743 ("gpio: delete
ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Since commit 14e85c0e69d5 ("gpio: remove gpio_descs global array")
there is no limitation on the number of GPIOs that can be allocated
in the system since the allocation is fully dynamic.
ARCH_NR_GPIOS is today only used in order to provide downwards
gpiobase allocation from that value, while static allocation is
performed upwards from 0. However that has the disadvantage of
limiting the number of GPIOs that can be registered in the system.
To overcome this limitation without requiring each and every
platform to provide its 'best-guess' maximum number, rework the
allocation to allocate upwards, allowing approx 2 millions of
GPIOs.
In order to still allow static allocation for legacy drivers, define
GPIO_DYNAMIC_BASE with the value 512 as the start for dynamic
allocation. The 512 value is chosen because it is the end of
the current default range so all current static allocations are
expected to be below that value. Of course that's just a rough
estimate based on the default value, but assuming static
allocations come first, even if there are more static allocations
it should fit under the 512 value.
In the future, it is expected that all static allocations go away
and then dynamic allocation will be patched to start at 0.
Since commit 14e85c0e69d5 ("gpio: remove gpio_descs global array")
there is no global limitation anymore on the number of GPIOs in
the system so don't clamp the number of GPIOs with ARCH_NR_GPIOS.
ARCH_NR_GPIOS is used locally in aggr_parse() as the maximum number
of GPIOs to be aggregated together by the driver since
commit ec75039d5550 ("gpio: aggregator: Use bitmap_parselist() for
parsing GPIO offsets").
Don't rely on the total possible number of GPIOs in the system but
define a local arbitrary macro for that, set to 512 which should be
large enough as it is also the default value for ARCH_NR_GPIOS.
The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Stephen Kitt [Wed, 12 Oct 2022 14:25:23 +0000 (16:25 +0200)]
drivers/gpio: use simple i2c probe
All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.
This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,
/*
* When there are no more users of probe(),
* rename probe_new to probe.
*/
if (driver->probe_new)
status = driver->probe_new(client);
else if (driver->probe)
status = driver->probe(client,
i2c_match_id(driver->id_table, client));
else
status = -EINVAL;
Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).
This change was done using the following Coccinelle script, and fixed
up for whitespace changes:
Linus Torvalds [Sun, 16 Oct 2022 22:27:07 +0000 (15:27 -0700)]
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Linus Torvalds [Sun, 16 Oct 2022 22:14:29 +0000 (15:14 -0700)]
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
Linus Torvalds [Sun, 16 Oct 2022 18:12:22 +0000 (11:12 -0700)]
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Linus Torvalds [Sun, 16 Oct 2022 18:08:19 +0000 (11:08 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Linus Torvalds [Sun, 16 Oct 2022 18:01:40 +0000 (11:01 -0700)]
Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
Tetsuo Handa [Sat, 15 Oct 2022 15:53:51 +0000 (00:53 +0900)]
Revert "cpumask: fix checking valid cpu range".
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Masahiro Yamada [Fri, 14 Oct 2022 20:18:11 +0000 (05:18 +0900)]
kbuild: fix single directory build
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 16 Oct 2022 00:05:07 +0000 (17:05 -0700)]
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
Linus Torvalds [Sat, 15 Oct 2022 23:47:33 +0000 (16:47 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
Linus Torvalds [Sat, 15 Oct 2022 23:36:38 +0000 (16:36 -0700)]
Merge tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
Hyeonggon Yoo [Sat, 15 Oct 2022 04:34:29 +0000 (13:34 +0900)]
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Steve French [Sat, 15 Oct 2022 05:43:22 +0000 (00:43 -0500)]
smb3: improve SMB3 change notification support
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
Steve French [Sat, 15 Oct 2022 01:00:32 +0000 (20:00 -0500)]
cifs: lease key is uninitialized in two additional functions when smb1
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 00:18:32 +0000 (19:18 -0500)]
cifs: lease key is uninitialized in smb1 paths
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 14 Oct 2022 20:14:54 +0000 (17:14 -0300)]
cifs: fix double-fault crash during ntlmssp
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Arnaldo Carvalho de Melo [Fri, 7 Aug 2020 11:45:47 +0000 (08:45 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked") ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch only add basic parsing support according to the definition of
the PTT packet described in Documentation/trace/hisi-ptt.rst. And the
fields of each packet can be further decoded following the PCIe Spec's
definition of TLP packet.
Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:49 +0000 (21:21 +0530)]
perf tests stat+json_output: Include sanity check for topology
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 0c343af2a2f82844 ("perf test: JSON format checking") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:48 +0000 (21:21 +0530)]
perf tests stat+csv_output: Include sanity check for topology
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:59 +0000 (11:22 +0300)]
perf intel-pt: Fix system_wide dummy event for hybrid
User space tasks can migrate between CPUs, so when tracing selected CPUs,
system-wide sideband is still needed, however evlist->core.has_user_cpus
is not set in the hybrid case, so check the target cpu_list instead.
Fixes: 7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:58 +0000 (11:22 +0300)]
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Wed, 12 Oct 2022 09:46:32 +0000 (10:46 +0100)]
perf test: Fix attr tests for PERF_FORMAT_LOST
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ammy Yi [Fri, 14 Oct 2022 17:09:05 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Add 9 tests
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:04 +0000 (20:09 +0300)]
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lieven Hey <lieven.hey@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:03 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Add jitdump test
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:02 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Tidy some alignment
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:01 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:00 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Tidy some perf record options
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 15 Oct 2022 01:41:41 +0000 (18:41 -0700)]
Merge tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
Linus Torvalds [Sat, 15 Oct 2022 01:36:42 +0000 (18:36 -0700)]
Merge tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A great rework of the isl12022 driver makes up the bulk of the
changes. There is also an important fix for CMOS and then the usual
small fixes:
- switch to devm_clk_get_enabled() where relevant
- cmos: event handler registration fix
- isl12022: code improvements"
* tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rv3028: Fix codestyle errors
rtc: cmos: Fix event handler registration ordering issue
rtc: k3: Use devm_clk_get_enabled() helper
rtc: jz4740: Use devm_clk_get_enabled() helper
rtc: mpfs: Use devm_clk_get_enabled() helper
rtc: ds1685: Fix spelling of function name in comment block
rtc: isl12022: switch to using regmap API
rtc: isl12022: drop redundant write to HR register
rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
rtc: isl12022: use %ptR
rtc: isl12022: simplify some expressions
rtc: isl12022: drop a dev_info()
rtc: isl12022: specify range_min and range_max
rtc: isl12022: stop using deprecated devm_rtc_device_register()
rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()
rtc: mxc: Use devm_clk_get_enabled() helper
rtc: gamecube: Always reset HW_SRNPROT after read
rtc: k3: detect SoC to determine erratum fix
rtc: k3: wait until the unlock field is not zero
rtc: mpfs: Remove printing of stray CR
Linus Torvalds [Sat, 15 Oct 2022 01:31:28 +0000 (18:31 -0700)]
Merge tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle, only two fixes for a rare event"
- fix device reattach issues"
* tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Remove the wrong place of reattach.
i3c: master: Free the old_dyn_addr when reattach.
Linus Torvalds [Sat, 15 Oct 2022 01:23:23 +0000 (18:23 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
Linus Torvalds [Sat, 15 Oct 2022 01:14:48 +0000 (18:14 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Move to strscpy()
- Improve panic notifiers
- Fix NR_CPUS usage
- Fixes for various comments
- Fixes for virtio driver
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
uml: Remove the initialization of statics to 0
um: Do not initialise statics to 0.
um: Fix comment typo
um: Improve panic notifiers consistency and ordering
um: remove unused reactivate_chan() declaration
um: mmaper: add __exit annotations to module exit funcs
um: virt-pci: add __init/__exit annotations to module init/exit funcs
hostfs: move from strlcpy with unused retval to strscpy
um: move from strlcpy with unused retval to strscpy
um: increase default virtual physical memory to 64 MiB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
um: read multiple msg from virtio slave request fd
Linus Torvalds [Fri, 14 Oct 2022 20:47:42 +0000 (13:47 -0700)]
Merge tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"A last-minute arch/alpha regression fix: the previous asm-generic
branch contained a new regression from a typo"
* tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: fix marvel_ioread8 build regression
Linus Torvalds [Fri, 14 Oct 2022 20:44:53 +0000 (13:44 -0700)]
Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
Stephen Boyd [Fri, 14 Oct 2022 20:44:44 +0000 (13:44 -0700)]
Merge branch 'clk-rate-range' into clk-next
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
Jon Hunter [Mon, 10 Oct 2022 10:00:46 +0000 (11:00 +0100)]
clk: tegra: Fix Tegra PWM parent clock
Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3 Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Walleij [Thu, 13 Oct 2022 14:07:45 +0000 (16:07 +0200)]
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests
to the parent"), the clk_rate_request is .. as the title says, not
forwarded anymore to the parent: this produces an issue with the
MediaTek clock MUX driver during GPU DVFS on MT8195, but not on
MT8192 or others.
This is because, differently from others, like MT8192 where all of
the clocks in the MFG parents tree are of mtk_mux type, but in the
parent tree of MT8195's MFG clock, we have one mtk_mux clock and
one (clk framework generic) mux clock, like so:
To solve this issue and also keep the GPU DVFS clocks code working
as expected, wire up a .determine_rate() callback for the mtk_mux
ops; for that, the standard clk_mux_determine_rate_flags() was used
as it was possible to.
This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
MT8192 Spherion and MT8195 Tomato; no regressions were seen.
For the sake of some more documentation about this issue here's the
trace of it:
The rule for generating human readable LLVM IR (.ll) is only useful as a
debugging feature:
$ make LLVM=1 fs/select.ll
As Fangrui notes:
A LLVM_ENABLE_ASSERTIONS=off build of Clang defaults to
-fdiscard-value-names.
A LLVM_ENABLE_ASSERTIONS=on build of Clang defaults to
-fno-discard-value-names.
Explicitly enable -fno-discard-value-names so that the IR always contains
value names regardless of whether assertions were enabled or not.
Assertions generally are not enabled in releases of clang packaged by
distributions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1467 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Fri, 14 Oct 2022 20:22:14 +0000 (13:22 -0700)]
Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few remaining patches for 6.1-rc1.
The major changes are the hibernation fixes for HD-audio CS35L41 codec
and the USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen"
* tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l41: Support System Suspend
ALSA: hda: cs35l41: Remove suspend/resume hda hooks
ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls
ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: usb-audio: Avoid superfluous endpoint setup
ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params()
ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params()
ALSA: usb-audio: Avoid unnecessary interface change at EP close
ALSA: hda: Update register polling macros
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
Linus Torvalds [Fri, 14 Oct 2022 19:38:03 +0000 (12:38 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Cortex-A55 errata workaround (repeat TLBI)
- AMPERE1 added to the Spectre-BHB affected list
- MTE fix to avoid setting PG_mte_tagged if no tags have been touched
on a page
- Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has
other typos)
- perf: return value check in ali_drw_pmu_probe(),
ALIBABA_UNCORE_DRW_PMU dependency on ACPI
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add AMPERE1 to the Spectre-BHB affected list
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI
drivers/perf: fix return value check in ali_drw_pmu_probe()
arm64: errata: Add Cortex-A55 to the repeat tlbi list
arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK
Linus Torvalds [Fri, 14 Oct 2022 19:28:43 +0000 (12:28 -0700)]
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
projects / users / willy / xarray.git / log