Linus Torvalds [Fri, 15 Aug 2025 13:54:37 +0000 (06:54 -0700)]
Merge tag 'gpio-fixes-for-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix the way optional interrupts are retrieved from firmware in
gpio-mlxbf3
* tag 'gpio-fixes-for-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: use platform_get_irq_optional()
Revert "gpio: mlxbf3: only get IRQ for device instance 0"
Linus Torvalds [Fri, 15 Aug 2025 12:58:19 +0000 (05:58 -0700)]
Merge tag '6.17-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix unlink race and rename races
- SMB3.1.1 compression fix
- Avoid unneeded strlen calls in cifs_get_spnego_key
- Fix slab out of bounds in parse_server_interfaces()
- Fix mid leak and server buffer leak
- smbdirect send error path fix
- update internal version #
- Fix unneeded response time update in negotiate protocol
* tag '6.17-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: remove redundant lstrp update in negotiate protocol
cifs: update internal version number
smb: client: don't wait for info->send_pending == 0 on error
smb: client: fix mid_q_entry memleak leak with per-mid locking
smb3: fix for slab out of bounds on mount to ksmbd
cifs: avoid extra calls to strlen() in cifs_get_spnego_key()
cifs: Fix collect_sample() to handle any iterator type
smb: client: fix race with concurrent opens in rename(2)
smb: client: fix race with concurrent opens in unlink(2)
Linus Torvalds [Fri, 15 Aug 2025 02:15:22 +0000 (19:15 -0700)]
Merge tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This fixes a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure
that handlers which may call schedule() are invoked safely outside of
the critical section"
* tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered
firewire: core: call FCP address handlers outside RCU read-side critical section
firewire: core: call handler for exclusive regions outside RCU read-side critical section
firewire: core: use reference counting to invoke address handlers safely
Linus Torvalds [Thu, 14 Aug 2025 15:20:58 +0000 (08:20 -0700)]
Merge tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These restore corner case behavior of the EC driver related to the
handling of defective ACPI tables and fix a recent regression in the
ACPI processor driver:
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf)
- Rearrange checks in acpi_processor_ppc_init() to restore the
handling of frequency QoS requests related to _PPC limits
inadvertently broken by a recent update (Rafael Wysocki)"
* tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Relax sanity check of the ECDT ID string
ACPI: processor: perflib: Move problematic pr->performance check
Linus Torvalds [Thu, 14 Aug 2025 14:55:31 +0000 (07:55 -0700)]
Merge tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove an artificial limitation from the intel_idle driver,
update the menu cpuidle governor to restore its previous behavior in a
corner case and add one more supported platform configuration to the
intel_pstate driver:
- Allow intel_idle to use _CST information from ACPI tables for idle
states enumeration on any family of processors (Len Brown)
- Restore corner case behavior of the menu cpuidle governor, related
to the handling of systems where idle states selected by the
governor are rejected by the cpuidle driver, inadvertently changed
during the 6.15 development cycle (Rafael Wysocki)
- Add support for Clearwater Forest in the out-of-band (OOB) mode to
the intel_pstate driver (Srinivas Pandruvada)"
* tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef53228 ("ALSA: usb-audio: Initial Power Domain support") Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xu Yang [Mon, 11 Aug 2025 09:29:31 +0000 (17:29 +0800)]
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Takashi Iwai [Thu, 14 Aug 2025 06:33:44 +0000 (08:33 +0200)]
Merge tag 'asoc-fix-v6.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A reasonably small collection of fixes that came in since the merge
window, mostly small and driver specific plus a cleanup of the menu
reorganisation to address some user confusion with the way the generic
drivers had been handled.
Sven Stegemann [Tue, 12 Aug 2025 19:18:03 +0000 (21:18 +0200)]
net: kcm: Fix race condition in kcm_unattach()
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
====================
ets: use old 'nbands' while purging unused classes
- patch 1/2 fixes a NULL dereference in the control path of sch_ets qdisc
- patch 2/2 extends kselftests to verify effectiveness of the above fix
====================
Davide Caratti [Tue, 12 Aug 2025 16:40:29 +0000 (18:40 +0200)]
net/sched: ets: use old 'nbands' while purging unused classes
Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify()
after recent changes from Lion [2]. The problem is: in ets_qdisc_change()
we purge unused DWRR queues; the value of 'q->nbands' is the new one, and
the cleanup should be done with the old one. The problem is here since my
first attempts to fix ets_qdisc_change(), but it surfaced again after the
recent qdisc len accounting fixes. Fix it purging idle DWRR queues before
assigning a new value of 'q->nbands', so that all purge operations find a
consistent configuration:
- old 'q->nbands' because it's needed by ets_class_find()
- old 'q->nstrict' because it's needed by ets_class_is_strict()
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
David Wei [Tue, 12 Aug 2025 18:29:07 +0000 (11:29 -0700)]
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 13 Aug 2025 21:51:51 +0000 (14:51 -0700)]
Merge tag 'nf-25-08-13' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for *net*:
1) I managed to add a null dereference crash in nft_set_pipapo
in the current development cycle, was not caught by CI
because the avx2 implementation is fine, but selftest
splats when run on non-avx2 host.
2) Fix the ipvs estimater kthread affinity, was incorrect
since 6.14. From Frederic Weisbecker.
3) nf_tables should not allow to add a device to a flowtable
or netdev chain more than once -- reject this.
From Pablo Neira Ayuso. This has been broken for long time,
blamed commit dates from v5.8.
* tag 'nf-25-08-13' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
====================
Linus Torvalds [Wed, 13 Aug 2025 18:29:27 +0000 (11:29 -0700)]
Merge tag 'erofs-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Align FSDAX enablement among multiple devices
- Fix EROFS_FS_ZIP_ACCEL build dependency again to prevent forcing
CRYPTO{,_DEFLATE}=y even if EROFS=m
- Fix atomic context detection to properly launch kworkers on demand
- Fix block count statistics for 48-bit addressing support
* tag 'erofs-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix block count report when 48-bit layout is on
erofs: fix atomic context detection when !CONFIG_DEBUG_LOCK_ALLOC
erofs: Do not select tristate symbols from bool symbols
erofs: Fallback to normal access if DAX is not supported on extra device
Linus Torvalds [Wed, 13 Aug 2025 17:23:28 +0000 (10:23 -0700)]
Merge tag 'rcu.fixes.6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Neeraj Upadhyay:
"Fix a regression introduced by commit b41642c87716 ("rcu: Fix
rcu_read_unlock() deadloop due to IRQ work") which results in boot
hang as reported by kernel test bot at [1].
This issue happens because RCU re-initializes the deferred QS IRQ work
everytime it is queued. With commit b41642c87716, the IRQ work
re-initialization can happen while it is already queued. This results
in IRQ work being requeued to itself. When IRQ work finally fires, as
it is requeued to itself, it is repeatedly executed and results in
hang.
Fix this with initializing the IRQ work only once before the CPU
boots"
Wang Zhaolong [Fri, 1 Aug 2025 09:07:24 +0000 (17:07 +0800)]
smb: client: remove redundant lstrp update in negotiate protocol
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Stefan Metzmacher [Tue, 12 Aug 2025 16:45:06 +0000 (18:45 +0200)]
smb: client: don't wait for info->send_pending == 0 on error
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Wang Zhaolong [Mon, 11 Aug 2025 14:07:37 +0000 (22:07 +0800)]
smb: client: fix mid_q_entry memleak leak with per-mid locking
This is step 4/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
In compound_send_recv(), when wait_for_response() is interrupted by
signals, the code attempts to cancel pending requests by changing
their callbacks to cifs_cancelled_callback. However, there's a race
condition between signal interruption and network response processing
that causes both mid_q_entry and server buffer leaks:
```
User foreground process cifsd
cifs_readdir
open_cached_dir
cifs_send_recv
compound_send_recv
smb2_setup_request
smb2_mid_entry_alloc
smb2_get_mid_entry
smb2_mid_entry_alloc
mempool_alloc // alloc mid
kref_init(&temp->refcount); // refcount = 1
mid[0]->callback = cifs_compound_callback;
mid[1]->callback = cifs_compound_last_callback;
smb_send_rqst
rc = wait_for_response
wait_event_state TASK_KILLABLE
cifs_demultiplex_thread
allocate_buffers
server->bigbuf = cifs_buf_get()
standard_receive3
->find_mid()
smb2_find_mid
__smb2_find_mid
kref_get(&mid->refcount) // +1
cifs_handle_standard
handle_mid
/* bigbuf will also leak */
mid->resp_buf = server->bigbuf
server->bigbuf = NULL;
dequeue_mid
/* in for loop */
mids[0]->callback
cifs_compound_callback
/* Signal interrupts wait: rc = -ERESTARTSYS */
/* if (... || midQ[i]->mid_state == MID_RESPONSE_RECEIVED) *?
midQ[0]->callback = cifs_cancelled_callback;
cancelled_mid[i] = true;
/* The change comes too late */
mid->mid_state = MID_RESPONSE_READY
release_mid // -1
/* cancelled_mid[i] == true causes mid won't be released
in compound_send_recv cleanup */
/* cifs_cancelled_callback won't executed to release mid */
```
The root cause is that there's a race between callback assignment and
execution.
Fix this by introducing per-mid locking:
- Add spinlock_t mid_lock to struct mid_q_entry
- Add mid_execute_callback() for atomic callback execution
- Use mid_lock in cancellation paths to ensure atomicity
This ensures that either the original callback or the cancellation
callback executes atomically, preventing reference count leaks when
requests are interrupted by signals.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220404 Fixes: ee258d79159a ("CIFS: Move credit processing to mid callbacks for SMB3") Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Mario Limonciello (AMD) [Wed, 13 Aug 2025 14:03:08 +0000 (09:03 -0500)]
Revert "ALSA: hda: Add ASRock X670E Taichi to denylist"
On a motherboard with an AMD Granite Ridge CPU there is a report
that 3.5mm microphone and headphones aren't working. In the
log it's observed:
snd_hda_intel 0000:02:00.6: Skipping the device on the denylist
This was because of commit df42ee7e22f03 ("ALSA: hda: Add ASRock
X670E Taichi to denylist"). Reverting this commit allows the
microphone and headphones to work again. As at least some combinations
of this motherboard do have applicable devices, revert so that they
can be probed.
Takashi Iwai [Wed, 13 Aug 2025 15:36:27 +0000 (17:36 +0200)]
ALSA: azt3328: Put __maybe_unused for inline functions for gameport
Some inline functions are unused depending on kconfig, and the recent
change for clang builds made those handled as errors with W=1.
For avoiding pitfalls, mark those with __maybe_unused attributes.
Linus Torvalds [Wed, 13 Aug 2025 15:28:33 +0000 (08:28 -0700)]
Merge tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 5 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels.
10 of these fixes are for MM"
* tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: proc_maps_open allow proc_mem_open to return NULL
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
mm: pass page directly instead of using folio_page
selftests/proc: fix string literal warning in proc-maps-race.c
fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats
mm/smaps: fix race between smaps_hugetlb_range and migration
mm: fix the race between collapse and PT_RECLAIM under per-vma lock
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
MAINTAINERS: add Masami as a reviewer of hung task detector
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock
kasan/test: fix protection against compiler elision
Pablo Neira Ayuso [Wed, 13 Aug 2025 00:38:50 +0000 (02:38 +0200)]
netfilter: nf_tables: reject duplicate device on updates
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable") Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
Jakub Kicinski [Thu, 7 Aug 2025 23:29:06 +0000 (16:29 -0700)]
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe: prevent from unwanted interface name changes
Users of the ixgbe driver report that after adding devlink support by
the commit a0285236ab93 ("ixgbe: add initial devlink support") their
configs got broken due to unwanted changes of interface names. It's
caused by automatic phys_port_name generation during devlink port
initialization flow.
To prevent from that set no_phys_port_name flag for ixgbe devlink ports.
Reported-by: David Howells <dhowells@redhat.com> Closes: https://lore.kernel.org/netdev/3452224.1745518016@warthog.procyon.org.uk/ Reported-by: David Kaplan <David.Kaplan@amd.com> Closes: https://lore.kernel.org/netdev/LV3PR12MB92658474624CCF60220157199470A@LV3PR12MB9265.namprd12.prod.outlook.com/ Fixes: a0285236ab93 ("ixgbe: add initial devlink support") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
devlink: let driver opt out of automatic phys_port_name generation
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
ASoC: stm: stm32_i2s: Fix calc_clk_div() error handling in determine_rate()
calc_clk_div() will only return a non-zero value (-EINVAL)
in case of error. On the other hand, req->rate is an unsigned long.
It seems quite odd that req->rate would be assigned a negative value,
which is clearly not a rate, and success would be returned.
Reinstate previous logic, which would just return error.
Armin Wolf [Tue, 29 Jul 2025 06:20:38 +0000 (08:20 +0200)]
ACPI: EC: Relax sanity check of the ECDT ID string
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me> Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Ilya K <me@0upti.me> Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de Cc: 6.16+ <stable@vger.kernel.org> # 6.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Tue, 12 Aug 2025 15:52:05 +0000 (08:52 -0700)]
Merge tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix bug in qgroups reporting incorrect usage for higher level qgroups
- in zoned mode, do not select metadata group as finish target
- convert xarray lock to RCU when trying to release extent buffer to
avoid a deadlock
- do not allow relocation on partially dropped subvolumes, which is
normally not possible but has been reported on old filesystems
- in tree-log, report errors on missing block group when unaccounting
log tree extent buffers
- with large folios, fix range length when processing ordered extents
* tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix iteration bug in __qgroup_excl_accounting()
btrfs: zoned: do not select metadata BG as finish target
btrfs: do not allow relocation of partially dropped subvolumes
btrfs: error on missing block group when unaccounting log tree extent buffers
btrfs: fix wrong length parameter for btrfs_cleanup_ordered_extents()
btrfs: make btrfs_cleanup_ordered_extents() support large folios
btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()
Linus Torvalds [Tue, 12 Aug 2025 15:19:23 +0000 (08:19 -0700)]
Merge tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for a cache coherency vulnerability when running an
SNP guest which makes sure all cache lines belonging to a 4K page are
evicted after latter has been converted to a guest-private page
[ SNP: Secure Nested Paging - not to be confused with Single Nucleotide
Polymorphism, which is the more common use of that TLA. I am on a
mission to write out the more obscure TLAs in order to keep track of
them.
Because while math tells us that there are only about 17k different
combinations of three-letter acronyms using English letters (26^3), I
am convinced that somehow Intel, AMD and ARM have together figured out
new mathematics, and have at least a million different TLAs that they
use. - Linus ]
* tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Evict cache lines during SNP memory validation
David Thompson [Mon, 11 Aug 2025 17:50:45 +0000 (13:50 -0400)]
gpio: mlxbf3: use platform_get_irq_optional()
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
1) Fix flushing of all states in xfrm_state_fini.
From Sabrina Dubroca.
2) Fix some IPsec software offload features. These
got lost with some recent HW offload changes.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
udp: also consider secpath when evaluating ipsec use for checksumming
xfrm: bring back device check in validate_xmit_xfrm
xfrm: restore GSO for SW crypto
xfrm: flush all states in xfrm_state_fini
====================
====================
net: prevent deadlocks and mis-configuration with per-NAPI threaded config
Running the test added with a recent fix on a driver with persistent
NAPI config leads to a deadlock. The deadlock is fixed by patch 3,
patch 2 is I think a more fundamental problem with the way we
implemented the config.
I hope the fix makes sense, my own thinking is definitely colored
by my preference (IOW how the per-queue config RFC was implemented).
napi_enable()
napi_restore_config()
napi_set_threaded(0)
napi_stop_kthread()
while (NAPIF_STATE_SCHED)
msleep(20)
We deadlock because disabled NAPI has STATE_SCHED set.
Creating a thread in netif_napi_add() just to destroy it in
napi_disable() is fairly ugly in the first place. Let's read
both the device config and the NAPI config in netif_napi_add().
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250809001205.1147153-4-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Sat, 9 Aug 2025 00:12:04 +0000 (17:12 -0700)]
net: update NAPI threaded config even for disabled NAPIs
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e7793 ("Add support to set NAPI threaded for individual NAPI") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Sat, 9 Aug 2025 00:12:03 +0000 (17:12 -0700)]
selftests: drv-net: don't assume device has only 2 queues
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thorsten Blum [Sun, 10 Aug 2025 21:41:05 +0000 (23:41 +0200)]
ASoC: codecs: Call strscpy() with correct size argument
In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
Yao Zi [Fri, 8 Aug 2025 09:36:55 +0000 (09:36 +0000)]
net: stmmac: thead: Get and enable APB clock on initialization
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi <ziyao@disroot.org> Tested-by: Drew Fustini <fustini@kernel.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Besides ones for GMAC core and peripheral registers, the TH1520 GMAC
requires one more clock for configuring APB glue registers. Describe
it in the binding.
Fixes: f920ce04c399 ("dt-bindings: net: Add T-HEAD dwmac support") Signed-off-by: Yao Zi <ziyao@disroot.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250808093655.48074-3-ziyao@disroot.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Buday Csaba [Thu, 7 Aug 2025 13:54:49 +0000 (15:54 +0200)]
net: mdiobus: release reset_gpio in mdiobus_unregister_device()
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ] Signed-off-by: Buday Csaba <buday.csaba@prolan.hu> Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Clark Wang [Thu, 7 Aug 2025 04:08:32 +0000 (12:08 +0800)]
net: phy: nxp-c45-tja11xx: fix the PHY ID mismatch issue when using C45
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Jialin Wang [Thu, 7 Aug 2025 16:54:55 +0000 (00:54 +0800)]
proc: proc_maps_open allow proc_mem_open to return NULL
The commit 65c66047259f ("proc: fix the issue of proc_mem_open returning
NULL") caused proc_maps_open() to return -ESRCH when proc_mem_open()
returns NULL. This breaks legitimate /proc/<pid>/maps access for kernel
threads since kernel threads have NULL mm_struct.
The regression causes perf to fail and exit when profiling a kernel
thread:
# perf record -v -g -p $(pgrep kswapd0)
...
couldn't open /proc/65/task/65/maps
This patch partially reverts the commit to fix it.
Link: https://lkml.kernel.org/r/20250807165455.73656-1-wjl.linux@gmail.com Fixes: 65c66047259f ("proc: fix the issue of proc_mem_open returning NULL") Signed-off-by: Jialin Wang <wjl.linux@gmail.com> Cc: Penglei Jiang <superman.xpt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Thu, 7 Aug 2025 18:58:19 +0000 (19:58 +0100)]
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
It was discovered in the attached report that commit f822a9a81a31 ("mm:
optimize mremap() by PTE batching") introduced a significant performance
regression on a number of metrics on x86-64, most notably
stress-ng.bigheap.realloc_calls_per_sec - indicating a 37.3% regression in
number of mremap() calls per second.
I was able to reproduce this locally on an intel x86-64 raptor lake
system, noting an average of 143,857 realloc calls/sec (with a stddev of
4,531 or 3.1%) prior to this patch being applied, and 81,503 afterwards
(stddev of 2,131 or 2.6%) - a 43.3% regression.
During testing I was able to determine that there was no meaningful
difference in efforts to optimise the folio_pte_batch() operation, nor
checking folio_test_large().
This is within expectation, as a regression this large is likely to
indicate we are accessing memory that is not yet in a cache line (and
perhaps may even cause a main memory fetch).
The expectation by those discussing this from the start was that
vm_normal_folio() (invoked by mremap_folio_pte_batch()) would likely be
the culprit due to having to retrieve memory from the vmemmap (which
mremap() page table moves does not otherwise do, meaning this is
inevitably cold memory).
I was able to definitively determine that this theory is indeed correct
and the cause of the issue.
The solution is to restore part of an approach previously discarded on
review, that is to invoke pte_batch_hint() which explicitly determines,
through reference to the PTE alone (thus no vmemmap lookup), what the PTE
batch size may be.
On platforms other than arm64 this is currently hardcoded to return 1, so
this naturally resolves the issue for x86-64, and for arm64 introduces
little to no overhead as the pte cache line will be hot.
With this patch applied, we move from 81,503 realloc calls/sec to 138,701
(stddev of 496.1 or 0.4%), which is a -3.6% regression, however accounting
for the variance in the original result, this is broadly restoring
performance to its prior state.
Link: https://lkml.kernel.org/r/20250807185819.199865-1-lorenzo.stoakes@oracle.com Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202508071609.4e743d7c-lkp@intel.com Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Pedro Falcato <pfalcato@suse.de> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Dev Jain <dev.jain@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Suren Baghdasaryan [Wed, 6 Aug 2025 22:00:22 +0000 (15:00 -0700)]
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David] Link: https://lkml.kernel.org/r/20250807200418.1963585-1-surenb@google.com Link: https://lkml.kernel.org/r/20250806220022.926763-1-surenb@google.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/ Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dev Jain [Wed, 6 Aug 2025 14:56:11 +0000 (20:26 +0530)]
mm: pass page directly instead of using folio_page
In commit_anon_folio_batch(), we iterate over all pages pointed to by the
PTE batch. Therefore we need to know the first page of the batch;
currently we derive that via folio_page(folio, 0), but, that takes us to
the first (head) page of the folio instead - our PTE batch may lie in the
middle of the folio, leading to incorrectness.
Bite the bullet and throw away the micro-optimization of reusing the folio
in favour of code simplicity. Derive the page and the folio in
change_pte_range, and pass the page too to commit_anon_folio_batch to fix
the aforementioned issue.
Link: https://lkml.kernel.org/r/20250806145611.3962-1-dev.jain@arm.com Fixes: cac1db8c3aad ("mm: optimize mprotect() by PTE batching") Reported-by: syzbot+57bcc752f0df8bb1365c@syzkaller.appspotmail.com Signed-off-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Debugged-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Joey Gouly <joey.gouly@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <yang@os.amperecomputing.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sukrut Heroorkar [Mon, 4 Aug 2025 22:56:14 +0000 (00:56 +0200)]
selftests/proc: fix string literal warning in proc-maps-race.c
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Dmitry Antipov [Fri, 8 Aug 2025 14:52:21 +0000 (17:52 +0300)]
cifs: avoid extra calls to strlen() in cifs_get_spnego_key()
Since 'snprintf()' returns the number of characters emitted, an
output position may be advanced with this return value rather
than using an explicit calls to 'strlen()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
David Howells [Mon, 11 Aug 2025 07:34:04 +0000 (08:34 +0100)]
cifs: Fix collect_sample() to handle any iterator type
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Russell King (Oracle) [Fri, 8 Aug 2025 12:16:39 +0000 (13:16 +0100)]
net: stmmac: dwc-qos: fix clk prepare/enable leak on probe failure
dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables
them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe()
fail, we leave the clocks prepared and enabled. Fix this by using
devm_clk_bulk_get_all_enabled() to combine the steps and provide devm
based release of the prepare and enable state.
This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't
correctly retrieving the struct plat_stmmacenet_data. This becomes
unnecessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: a045e40645df ("net: stmmac: refactor clock management in EQoS driver") Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 8 Aug 2025 12:16:34 +0000 (13:16 +0100)]
net: stmmac: rk: put the PHY clock on remove
The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which
doesn't take part in the devm release. Therefore, when a device is
unbound, this clock needs to be explicitly put. Fix this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support") Link: https://patch.msgid.link/E1ukM1S-0086qo-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeff Layton [Fri, 8 Aug 2025 11:45:23 +0000 (07:45 -0400)]
ref_tracker: use %p instead of %px in debugfs dentry name
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f53611 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir") Reported-by: Kees Cook <kees@kernel.org> Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/ Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafael J. Wysocki [Mon, 11 Aug 2025 15:03:11 +0000 (17:03 +0200)]
cpuidle: governors: menu: Avoid using invalid recent intervals data
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Linus Torvalds [Mon, 11 Aug 2025 14:38:55 +0000 (07:38 -0700)]
Merge tag 'nfsd-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A correctness fix for delegated timestamps
- Address an NFSD shutdown hang when LOCALIO is in use
- Prevent a remotely exploitable crasher when TLS is in use
* tag 'nfsd-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: fix handling of server side tls alerts
nfsd: avoid ref leak in nfsd_open_local_fh()
nfsd: don't set the ctime on delegated atime updates
Jon Hunter [Thu, 31 Jul 2025 12:18:32 +0000 (13:18 +0100)]
soc/tegra: pmc: Ensure power-domains are in a known state
After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Frederic Weisbecker [Fri, 8 Aug 2025 17:03:22 +0000 (19:03 +0200)]
rcu: Fix racy re-initialization of irq_work causing hangs
RCU re-initializes the deferred QS irq work everytime before attempting
to queue it. However there are situations where the irq work is
attempted to be queued even though it is already queued. In that case
re-initializing messes-up with the irq work queue that is about to be
handled.
The chances for that to happen are higher when the architecture doesn't
support self-IPIs and irq work are then all lazy, such as with the
following sequence:
1) rcu_read_unlock() is called when IRQs are disabled and there is a
grace period involving blocked tasks on the node. The irq work
is then initialized and queued.
2) The related tasks are unblocked and the CPU quiescent state
is reported. rdp->defer_qs_iw_pending is reset to DEFER_QS_IDLE,
allowing the irq work to be requeued in the future (note the previous
one hasn't fired yet).
3) A new grace period starts and the node has blocked tasks.
4) rcu_read_unlock() is called when IRQs are disabled again. The irq work
is re-initialized (but it's queued! and its node is cleared) and
requeued. Which means it's requeued to itself.
5) The irq work finally fires with the tick. But since it was requeued
to itself, it loops and hangs.
Fix this with initializing the irq work only once before the CPU boots.
Fixes: b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202508071303.c1134cce-lkp@intel.com Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Junli Liu [Tue, 5 Aug 2025 01:19:58 +0000 (09:19 +0800)]
erofs: fix atomic context detection when !CONFIG_DEBUG_LOCK_ALLOC
Since EROFS handles decompression in non-atomic contexts due to
uncontrollable decompression latencies and vmap() usage, it tries
to detect atomic contexts and only kicks off a kworker on demand
in order to reduce unnecessary scheduling overhead.
However, the current approach is insufficient and can lead to
sleeping function calls in invalid contexts, causing kernel
warnings and potential system instability. See the stacktrace [1]
and previous discussion [2].
The current implementation only checks rcu_read_lock_any_held(),
which behaves inconsistently across different kernel configurations:
- When CONFIG_DEBUG_LOCK_ALLOC is enabled: correctly detects
RCU critical sections by checking rcu_lock_map
- When CONFIG_DEBUG_LOCK_ALLOC is disabled: compiles to
"!preemptible()", which only checks preempt_count and misses
RCU critical sections
This patch introduces z_erofs_in_atomic() to provide comprehensive
atomic context detection:
1. Check RCU preemption depth when CONFIG_PREEMPTION is enabled,
as RCU critical sections may not affect preempt_count but still
require atomic handling
2. Always use async processing when CONFIG_PREEMPT_COUNT is disabled,
as preemption state cannot be reliably determined
3. Fall back to standard preemptible() check for remaining cases
The function replaces the previous complex condition check and ensures
that z_erofs always uses (kthread_)work in atomic contexts to minimize
scheduling overhead and prevent sleeping in invalid contexts.
erofs: Do not select tristate symbols from bool symbols
The EROFS filesystem has many configurable options, controlled through
boolean Kconfig symbols. When enabled, these options may need to enable
additional library functionality elsewhere. Currently this is done by
selecting the symbol for the additional functionality. However, if
EROFS_FS itself is modular, and the target symbol is a tristate symbol,
the additional functionality is always forced built-in.
Selecting tristate symbols from a tristate symbol does keep modular
transitivity. Hence fix this by moving selects of tristate symbols to
the main EROFS_FS symbol.
Yuezhang Mo [Mon, 4 Aug 2025 08:20:31 +0000 (16:20 +0800)]
erofs: Fallback to normal access if DAX is not supported on extra device
If using multiple devices, we should check if the extra device support
DAX instead of checking the primary device when deciding if to use DAX
to access a file.
If an extra device does not support DAX we should fallback to normal
access otherwise the data on that device will be inaccessible.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Reviewed-by: Friendy Su <friendy.su@sony.com> Reviewed-by: Jacky Cao <jacky.cao@sony.com> Reviewed-by: Daniel Palmer <daniel.palmer@sony.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20250804082030.3667257-2-Yuezhang.Mo@sony.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Kuninori Morimoto [Wed, 6 Aug 2025 23:34:52 +0000 (23:34 +0000)]
ASoC: generic: tidyup standardized ASoC menu for generic
commit acc84d15e45393fb ("ASoC: generic: Standardize ASoC menu")
standardized ASoC generic menu. Then, it moved generic menu position
under SoC group. It should be kept generic position. Tidyup it.
Alexey Klimov [Wed, 6 Aug 2025 14:00:30 +0000 (15:00 +0100)]
ASoC: codecs: tx-macro: correct tx_macro_component_drv name
We already have a component driver named "RX-MACRO", which is
lpass-rx-macro.c. The tx macro component driver's name should
be "TX-MACRO" accordingly. Fix it.
Shengjiu Wang [Thu, 7 Aug 2025 02:03:18 +0000 (10:03 +0800)]
ASoC: fsl_sai: replace regmap_write with regmap_update_bits
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ecb34 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Paulo Alcantara [Fri, 8 Aug 2025 14:43:29 +0000 (11:43 -0300)]
smb: client: fix race with concurrent opens in rename(2)
Besides sending the rename request to the server, the rename process
also involves closing any deferred close, waiting for outstanding I/O
to complete as well as marking all existing open handles as deleted to
prevent them from deferring closes, which increases the race window
for potential concurrent opens on the target file.
Fix this by unhashing the dentry in advance to prevent any concurrent
opens on the target.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Reviewed-by: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
projects / users / jedix / linux-maple.git / log