System panics while accessing stale pointer - timer_work_queue - in the IO path
before bnx2fc_stop is called. Fix is to destroy the workqueue after the destroy
operation is complete.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 2a7b29c5f267c143e280c1a5174a0d930bd6c1e3)
When SRR LS_ACC is dropped, the driver was not issuing ABTS for SRR when it
times out. Since the target received SRR, it was able to send the XFER_RDY and
the the original IO request completed successfully. In this condition ABTS was
not sent during bnx2fc_srr_compl(). Fix this by first checking for ELS timeout
and issue ABTS before checking if original IO request is complete.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 32c30454507b4f5f00661ac12ddbcc150983b9ff)
If the IO and the corresponding ABTS are not responded by a target, cleanup the
IO and issue explicit logout when ulp timer expires while waiting for ABTS to
complete. Wait for the session to be ready before returning to the SCSI layer.
If the session is not ready let the SCSI-ml escalate the error recovery.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 99cc600cdd6f938633394523447378f7a43f4340)
bnx2fc: call ctlr_link_up only when the interface is enabled
Link may not be up when the driver receives ulp_start event, and hence
fcoe_ctlr_link_up is not called. Call fcoe_ctlr_link_up during
indicate_netevent only when the interface is enabled. (It has to be called when
enabled because that is an indication that the vlan discovery is completed).
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit fd8fa9071e49a56cc91f739813ea88f16b7c1240)
Firmware asserts when the same CQE is armed twice. This scenario happens during
RSCN stress tests as driver incorrects arms the CQ after the session is
offloaded.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit a96e8e11635773dd88dbe1307f9482146cfe0562)
bnx2fc: Fix panic caused because of incorrect errror handling in create().
Driver incorrectly calls bnx2fc_interface_cleanup() when bnx2fc_if_create fails
which accesses bad pointer. Handle bnx2fc_if_create failure by directly calling
bnx2fc_net_cleanup.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 013068fa6f65f7037adedc141fbd27afc99ab1bb)
bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks
It is not required to hold rtnl_lock and bnx2fc_dev_lock when calling
bnx2fc_if_destroy, as the locking is only required to serialize creation and
deletion of fcoe instances. More importantly, this unnecessary locking causes
deadlock as bnx2fc_if_destroy calls fc_remove_host holding rtnl_lock.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 0cbf32e1681d870632a1772601cbaadd996dc978)
bnx2fc: Validate vlan id in NETDEV_UNREGISTER handler
When bnx2fc receives an UNREGISTER event on a vlan interface it calls
destroy on all interfaces that matches the physical interface. Add
vlan_id check to destroy only the vlan interface that generated the
event.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 26b2982f78c1fc6f486a67271b1d0a0d305dd54b)
ABTS was not issued for timed out REC, as REC completion handler exits out if
the IO completed. Check for timed out REC and issue ABTS before proceeding with
further processing in REC completion handler. Also, initialize rec_retry and
srr_retry before starting the IO.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit c1c16bd51a29eea8843f20161ddd32cddc524142)
bnx2fc: Send solicitation only after vlan discovery is complete
Link up event is generated to the driver even before vlan discovery has
started. Because of this driver can send discovery solicitation on a stale
vlan. Call fcoe_ctlr_link_up() only when the driver is in enabled state, which
implies the vlan discovery is complete before sending solicitation.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 8a5badf1ea10c726b9cc04e52f91395b1248e034)
bnx2fc: Prevent creating of NPIV port with duplicate WWN
This patch adds a validation step before allowing creation of a new NPIV port.
It checks whether the WWPN passed for the new NPIV port to be created is unique
for the given physical port.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 861efc547ce517e3d75a507ebc2268e6a0dfa767)
[SCSI] fcoe,libfcoe: Move common code for fcoe_get_lesb to fcoe_transport
Except for obtaining the netdev from lport, fcoe_get_lesb is the common code
for the LLDs.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 814740d5f67ae5f205349019bfaae38bcd0c8732)
[SCSI] bnx2fc: code cleanup in bnx2fc_offload_session
- Free session resources before rport logoff
- Do not free session resources in bnx2fc_alloc_session_resc() as it is handled
in caller's error handling path.
- Do not call bnx2fc_free_session_resc() if bnx2fc_init_tgt() fails as cq_lock
is not yet initialized.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 5fb8fd0dbc0f7e3bc3ea594223e5d4b50c2092d9)
[SCSI] bnx2fc: Fix NULL pointer deref during arm_cq.
There exists a race condition between CQ doorbell unmap and IO completion path
that arms the CQ which causes a NULL dereference. Protect the ctx_base with
cq_lock to avoid this. Also, wait for the CQ doorbell to be successfully mapped
before arming the CQ.
Also, do not count uncolicited CQ completions for free_sqes.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit b338c785c5c945383046ff39092e3021ea5b1d95)
[SCSI] bnx2fc: IO errors when receiving unsolicited LOGO
During the unsolicited LOGO processing, the session is uploaded and offloaded
after the relogin is complete. In between any new IOs are errored back as the
upload completion flag is set. Upon exhausting the retry count, the application
fails the IOs. Return target busy for all the cases when session is not ready.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 81214013130cd24142f6465f7f5a256fed530c17)
[SCSI] bnx2fc: Do not reuse the fcoe connection id immediately
CFC_DELETE is issued 2 secs after CONN_TERM is completed. If the session is
uploaded and offloaded immediately, it has to wait for the connection id to be
available.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 291fbe138f820f880b3e70852d200c0f2527430c)
[SCSI] bnx2fc: Handle NETDEV_UNREGISTER for vlan devices
Since the driver holds the reference for vlan netdev, the reference has to be
released by the driver when the vlan device is removed. Driver handles this in
NETDEV_UNREGISTER event.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit abc49a937b23adc7d9748709ca82ee32464ae089)
[SCSI] bnx2fc: Reorganize cleanup code between interface_cleanup and if_destory
Move interface specific cleanup functionality to from bnx2fc_if_destroy to
bnx2fc_interface_cleanup. Do not access interface/hba in bnx2fc_if_destroy as
by the time this function is called interface may already be destroyed. This
patch is in preparation to handle NETDEV_UNREGISTER on a vlan device.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 9be17fc43e0121e966049a323ad38a35626525c1)
[SCSI] bnx2fc: Change function names of bnx2fc_netdev_setup/bnx2fc_netdev_cleanup
Change them to bnx2fc_interface_setup/bnx2fc_interface_cleanup in preperation
for the patches to follow. Interface specific cleanup functionality will be
moved to bnx2fc_interface_cleanup.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 776cebcac6fad2f638c0ab16e2111a84c1c85d84)
[SCSI] bnx2fc: Do not attempt destroying NPIV port twice
When NPIV ports are created/deleted rapidly there is a race condition between
bnx2fc_vport_destroy() from sysfs and bnx2fc_flogi_resp(), which could try to
delete the NPIV port from the list twice. Fix is to loop through the list of
NPIV ports to find a match, and only when it exists remove it.
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit cdf54668bc48193e43adc8f75ce419ce0ce50fc0)
Eric Dumazet [Thu, 2 Feb 2012 13:03:22 +0000 (14:03 +0100)]
[SCSI] bnx2i: use kthread_create_on_node()
bnx2i_percpu_thread_create() create per cpu kthread, and should use
proper NUMA aware API.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 93713f3bf1d74c57ff851d17de54bb273d94210c)
Eddie Wai [Wed, 7 Dec 2011 06:41:21 +0000 (22:41 -0800)]
[SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref
During session recovery, the conn_stop call will trigger a flush
to all outstanding SCSI cmds in the xmit queue. This will set
all outstanding task->sc to NULL prior to the session_teardown
call which frees the task memory.
In the bnx2i SCSI response processing path, only the task was being checked
for NULL under the session lock before the task->sc->request dereferencing.
If there are outstanding SCSI cmd responses pending for process, the
following kernel panic can be exposed where task->sc was found to be NULL.
This patch adds the !task->sc check and also protects the sc dereferencing
under the session lock.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit a878185c3b93e692ace0d1628a47f3d75504ab4f)
Eddie Wai [Fri, 26 Aug 2011 18:16:47 +0000 (11:16 -0700)]
[SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission
The iscsi_nopout task's TTT is defined as __be32 while the DMA
memory to the chip is CPU specific. This creates a problem for
unsolicited NOP-In responses where the TTT is not the RESERVED
tag of 0xFFs. This patch adds a call to be32_to_cpu for the TTT
specified.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 610602f369b4c810c9df05e431abd38f38cb8e0d)
The problem lies in the slow path sg_io (and perhaps sg_scsi_ioctl) call to
blk_get_request->get_request/wait->blk_alloc_request->blk_rq_init which
re-initializes the request->cpu to -1. There is no assignment for cpu from
that to the request_fn call to low level drivers.
When this happens, the sc->request->cpu will be using the init value of
-1. This will create a kernel panic when it hits bnx2i because the code
refers it to get the per_cpu variables ptr.
This change is to put in a guard against that and also for cases when
bio affinity/queue completion to the same cpu is not enabled. In those
cases, the request->cpu will remain a -1 also.
For the case when the blk layer did not setup the request->cpu, bnx2i
will complete the sc with the current CPU of the thread.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
(cherry picked from commit 0d83ab65ff1b54ce8b6cd172285cf71a38c4cceb)
David S. Miller [Fri, 12 Aug 2011 10:00:47 +0000 (03:00 -0700)]
cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 4c78893b3d107e2a053c8f51c526510857c09858)
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit ab505dec96340946079d1288f49041bea9f259ff)
Enable FEC(Forward Error Correction) for 57810-KR to reduce link errors.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 6b1f3900fc0909fbf3bd672242378015f76b3df8)
Dmitry Kravkov [Tue, 9 Aug 2011 03:11:13 +0000 (03:11 +0000)]
bnx2x: disable dcb on 578xx since not supported yet
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 7712b644964c36d1216315b791faccc7d5238b16)
Dmitry Kravkov [Tue, 30 Aug 2011 00:08:40 +0000 (00:08 +0000)]
bnx2x: decrease print level to debug
It may happen every link toggle.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 5f837363457a2280530373267f86092625d15a4d)
Dmitry Kravkov [Tue, 30 Aug 2011 00:08:39 +0000 (00:08 +0000)]
bnx2x: fix BRB thresholds for dropless_fc mode
Fix the thresholds according to 5778x HW and increase rx_ring size
to suit new thresholds in dropless_fc mode.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit dfacf1387ceb6d7d6df614b18016fd1f347a1996)
Dmitry Kravkov [Sun, 9 Oct 2011 23:57:36 +0000 (23:57 +0000)]
bnx2x: fix cl_id allocation for non-eth clients for NPAR mode
There are some consolidations of NPAR configuration
when FCoE and iSCSI L2 clients will get the same id,
in this case FCoE ring will be non-functional.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 134d0f974c55c942541f1663d51fa846257eff2a)
Vladislav Zolotarov [Tue, 9 Aug 2011 03:08:55 +0000 (03:08 +0000)]
bnx2x: fix select_queue when FCoE is disabled
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit cdb9d6ae8d128cc01d7a0649201102cd7de356e0)
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f99779035730f8c3be8aeadd386cc9e77e086446)
Change XMAC loopback type from CORE LOCAL to LINE LOCAL for the BCM578xx due to intermittent problem with the loopback with this configuration.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 4d7e25d6cc4312b1f949123fea7026fd56441513)
Vladislav Zolotarov [Tue, 9 Aug 2011 03:08:09 +0000 (03:08 +0000)]
bnx2x: init FCOE FP only once
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 45d3539a2309858906abd8261c26f8ba8e50405a)
Remove remote fault detection as a tactic retreat due to link issues involved with it.
Once issue is resolved, this feature will be restored again.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 0582242049c67d59c3a95cd1cba8995fa955c858)
Michael Chan [Mon, 20 Feb 2012 09:59:10 +0000 (09:59 +0000)]
cnic: update for FW 7.2.xx
(cherry picked from commit e65de0716f4fb72b09fb37f603b71f4eabe18322) Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Commit 621b4d6 updated the bnx2x driver to a new FW version, but lacked
a commit to a header file with changes to the firmware's interface.
The missing interface change causes iscsi and fcoe to misbehave with the
updated firmware.
(cherry picked from commit f2ed5ee1b050495be49e5a0d5df152663558ef08) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Dmitry Kravkov [Mon, 26 Mar 2012 21:08:55 +0000 (21:08 +0000)]
bnx2x: fix vector traveling while looking for an empty entry
Fixes the bug that may prevent from mac to be configured,
while there is an empty slot for it.
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
(cherry picked from commit c54e9bd38a06babf94fd45e5f1df9a1109e12818) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yuval Mintz [Mon, 12 Mar 2012 08:53:11 +0000 (08:53 +0000)]
bnx2x: mark functions as loaded on shared memory
This change enables the FW to make more accurate decisions regarding the
active functions.
(cherry picked from commit 9ce392d4fa43c3abb9ab02a29e225084ed84451e) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Michal Schmidt [Thu, 15 Mar 2012 14:08:29 +0000 (14:08 +0000)]
bnx2x: fix memory leak in bnx2x_init_firmware()
When cycling the interface down and up, bnx2x_init_firmware() knows that
the firmware is already loaded, but nevertheless it allocates certain
arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old
arrays are leaked.
Fix the leaks by returning early if the firmware was already loaded.
Because if the firmware is loaded, so are the arrays.
(cherry picked from commit c0ea452e422a1fc78ec8c639df64012d0b8dbb4a) Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Michal Schmidt [Thu, 15 Mar 2012 14:08:28 +0000 (14:08 +0000)]
bnx2x: fix a crash on corrupt firmware file
If the requested firmware is deemed corrupt and then released, reset the
pointer to NULL in order to avoid double-freeing it in
bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware().
(cherry picked from commit 127d0a198a310970b31866af8bbb6d4b1068e546) Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Michal Schmidt [Thu, 16 Feb 2012 02:38:48 +0000 (02:38 +0000)]
bnx2x: make bnx2x_close() static again
Commit 8304859a "bnx2x: add fan failure event handling" made the function
bnx2x_close() non-static unnecessarily. The function is not called from
other sources. Make it static again.
(cherry picked from commit 56ad315250bec1cd239c18712e072d1ff1f4aaf3) Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Mintz Yuval [Wed, 15 Feb 2012 02:10:31 +0000 (02:10 +0000)]
bnx2x: removed code re-checking memory base after device open
(cherry picked from commit 04f2d51313938d004983652ea6162d4940d83a04) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Mintz Yuval [Wed, 15 Feb 2012 02:10:30 +0000 (02:10 +0000)]
bnx2x: allow BCM84833 phy to advertise 100Base-T speeds
(cherry picked from commit 10bd1f243c3a5ea1aebae88d21932e5614afa9cc) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Mintz Yuval [Wed, 15 Feb 2012 02:10:29 +0000 (02:10 +0000)]
bnx2x: notify cnic of address of info-to-the-mcp
(cherry picked from commit 82fa848c117e57f0b3fd848f2aaf3f6859f42201) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Mintz Yuval [Wed, 15 Feb 2012 02:10:28 +0000 (02:10 +0000)]
bnx2x: allocate smaller Rx rings for 1G functions
(cherry picked from commit d760fc37b0f74502b3f748951f22c6683b079a8e) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Merav Sicron [Wed, 15 Feb 2012 02:10:27 +0000 (02:10 +0000)]
bnx2x: allocate memory dynamically in ethtool self-test.
Current ethtool self tests usesa large buffer on stack. This patch replaces
that array by dynamically allocated memory
(cherry picked from commit afa13b4b94bc4b3247fa46dd8698c8dbfe1a615c) Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Wed, 15 Feb 2012 02:10:26 +0000 (02:10 +0000)]
bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertised
(cherry picked from commit 817a8aa8cfa1ebfb7bf27afb53ebb1ec3d49b564) Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Wed, 15 Feb 2012 02:10:25 +0000 (02:10 +0000)]
bnx2x: added autoneg-restart after link advertisement changes
(cherry picked from commit 1b85ae52733b859e280035330e016731d4a62307) Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Mintz Yuval [Wed, 15 Feb 2012 02:10:24 +0000 (02:10 +0000)]
bnx2x: ethtool publishes link partners speed and FC
Following the changes in the ethtool source code, this patch enables
the bnx2x driver to publish the Link partner's capabilities s, when ethtool
is used on an interface which completed autoneg.
(cherry picked from commit 9e7e8399c5d3c4dfaf84324a4a6b07a701d3e482) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Wed, 15 Feb 2012 02:10:23 +0000 (02:10 +0000)]
bnx2x: half duplex support added for several boards
Several boards require an additional HW bit written in-order to enable
half duplex.
(cherry picked from commit e18c56b2e94080982d4542987a6fcf80b12d9414) Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Michal Schmidt [Tue, 14 Feb 2012 09:05:46 +0000 (09:05 +0000)]
bnx2x: remove the 'poll' module option
'poll' was a debugging option, but turning it on these days leads to
kernel panic. Remove it.
(cherry picked from commit fc543637525b59af38af2ce09a4dbdd7d5eb27bf) Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Eric Dumazet [Mon, 13 Feb 2012 06:23:12 +0000 (06:23 +0000)]
bnx2x: fix bnx2x_storm_stats_update() on big endian
commit 619c5cb6885 (New 7.0 FW: bnx2x, cnic, bnx2i, bnx2fc) added new
sparse warnings.
(cherry picked from commit 66d885cba670059396b2f9ed9d5f4cbead0baee0) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Vladislav Zolotarov <vladz@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Jesper Juhl [Mon, 6 Feb 2012 11:28:21 +0000 (11:28 +0000)]
bnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails.
We allocate memory for 'new_data' with kmalloc(). If we get the memory
we then try to build_skb() and if that should fail (which it can) we
do not enter 'if (likely(skb)) {' and actually use 'new_data' but
instead fall through to the 'drop:' label and end up returning from
the function without ever assigning 'new'data' to anything or freeing
it. That leaks the memory allocated to 'new_data'.
This patch fixes the memory leak by doing a kfree(new_data) in the
case where build_skb() fails (or where allocation of 'new_data' itself
fails, but in taht case it's just a harmless kfree(NULL)).
(cherry picked from commit 3f61cd879c2f112c468e8849949b6fc88c739679) Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:54 +0000 (06:01 +0000)]
bnx2x: Update version to 1.72.0 and copyrights
(cherry picked from commit 85b26ea18ee63be83d65ec6db72ad7857980a04b) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:53 +0000 (06:01 +0000)]
bnx2x: Recoverable and unrecoverable error statistics
Add statistics for tracking parity errors from which we successfully
recovered and those which were deemed unrecoverable.
(cherry picked from commit 7a752993fe90adf8e150cc1a85beef5f782429e7) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:52 +0000 (06:01 +0000)]
bnx2x: Recovery flow bug fixes
1. Sample mcp pulse and mcp sequence in nic load instead of in init_one
as they may change by the time we want to use them.
2. Allow cnic to access device during nic load (by adding a new "LOADING" state
to recovery flow). This prevents the unnecessary cnic timeout which resulted
by cnic attempting to access because nic is loading, but being blocked because
of the Recovery state.
3. Issue 'fake' driver load command to mcp when last driver unloads to prevent
mcp from taking ownership. When recovery is complete unload fake driver to
allow mcp to initialize the hardware before first driver loads.
(cherry picked from commit 95c6c6165eaf5a031bcf31606e081c72e4acdeb8) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Dmitry Kravkov [Tue, 30 Aug 2011 00:08:44 +0000 (00:08 +0000)]
bnx2x: init fw_seq after undi_unload is done
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 0735f2fc8c49f1fbbbb245d038582922984ed3d5)
Ariel Elior [Thu, 26 Jan 2012 06:01:51 +0000 (06:01 +0000)]
bnx2x: Track active PFs with bitmap
The recovery register (to which a hardware lock has been added in previous
patch) is used amongst other things to track the active PFs. The old
implementation which used a per path counter is not viable in a virtualized
environment where a pf may increment the counter and then have the kernel
crash around it preventing the counter from ever reaching zero.
In the new implementation the scenario described will result in the PF timing
out against the mcp, which will clear the PF's bit in the bitmask allowing
recovery process to proceed.
(cherry picked from commit 889b9af34f986138eebebfe781567cb950b3a22b) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:50 +0000 (06:01 +0000)]
bnx2x: Lock PF-common resources
Use hardware locks to protect resources common to several Physical Functions. In
a virtualized environment the RTNL lock only protects a PF's driver against
the PFs sharing it's VMs with regard to device resources. Other PFs may reside
in other VMs under other OSs, and are not subject to the lock. Such resources
which were previously protected implicitly by the RTNL lock must now be
protected explicitly with dedicated HW locks.
(cherry picked from commit f16da43b5df947cef427f19b8f5c4b2f5d566231) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Dmitry Kravkov [Tue, 30 Aug 2011 00:08:43 +0000 (00:08 +0000)]
bnx2x: don't reset device while reading its configuration.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 7a06a122322c89544774e789a11aa671423e9362)
Ariel Elior [Thu, 26 Jan 2012 06:01:49 +0000 (06:01 +0000)]
bnx2x: Loaded Firmware Version Validation
In a virtualized environment it is possible for a loading driver to discover
that Firmware is already loaded to the device, and that this FW does not match
its own. This can happen for example if different Physical Functions are
Assigned to different VMs in which different driver versions are loaded. The
code in this patch ensures that only drivers with matching FW are loaded over
the device, and that in the case described above where the Firmware version
doesn't match the driver load is aborted.
(cherry picked from commit d1e2d9660e6bca2f06606b4bc65ea669bf669b0a) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:48 +0000 (06:01 +0000)]
bnx2x: Function Level Reset Final Cleanup
1. Fix bug where return value is ignored
2. Improve printouts
3. Fix typos
(cherry picked from commit 89db4ad830fbdde9c2d990b88bbac8245718177d) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:47 +0000 (06:01 +0000)]
bnx2x: Obtain Bus Device Function from register
BDF was obtained from kernel but since in virtualized environment
(e.g. physical device assigment in KVM) the function number may
not be the real one, the info must be obtained from the device.
(cherry picked from commit c22610d0001ebf3420d39f419056a56c5aa43096) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:46 +0000 (06:01 +0000)]
bnx2x: Removing indirect register access
In virtualized environments indirect access to the device may not be supported
(depending on the Hypervisor type). Indirect device access was used since in
some harware contexts (i.e. certain chipset and BIOS) every access the driver
makes across the pci is followed by a BIOS initiated Zero Length Read to the
same address. When accessing widebus registers this zero length read corrupts
the serialization of the read/write sequence resulting with errors. To avoid
this problem widebus registers are always accessed via the DMAE or the indirect
interface. However, the 57712x and 578xx devices intercept the zero length read
and so using the indirect interface with these devices is not necessary. Since
PDA is only supported for 57712x and 578xx the indirect access to device was
restricted to 57710 and 57711x.
(cherry picked from commit 127a425e8f05b9813879e8ca909ef4338ec8ec04) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Thu, 26 Jan 2012 06:01:45 +0000 (06:01 +0000)]
bnx2x: Support Queue Per Cos in 5771xx devices
Enable the use of up to three hardware queues for transmission. The queues
are always dequed round robin (i.e. strict priority, PFC and ETS are not
supported). This does allow the allocation of a seperate HW queue for low
volume, high priority traffic which will be serviced more promptly.
(cherry picked from commit 8d7b02783bc2b05974f6e47c2be8157f3a9cd89e) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Tue, 17 Jan 2012 02:33:27 +0000 (02:33 +0000)]
bnx2x: Remove 100Mb force speed for BCM84833
Remove unsupported speed of 100Mb force for BCM84833 due to hardware
limitation.
(cherry picked from commit 75318327802235ecd7e90b0760cceb994bf975ca) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Enable changing advertisement settings via ethtool.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 8d661637407963d1990e53c36d53ace123219da3)
Dan Carpenter [Tue, 24 Jan 2012 21:59:31 +0000 (21:59 +0000)]
bnx2x: unlock before returning an error
We introduced a new return here but forgot to drop the lock.
(cherry picked from commit a44acd551467d78a26bfa76ea348225575830efc) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yuval Mintz [Mon, 23 Jan 2012 07:31:56 +0000 (07:31 +0000)]
bnx2x: fix compilation error with SOE in fw_dump
(cherry picked from commit 44151acb9f13563e40d40d14c3e5c11ce21b59e1) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Ariel Elior [Mon, 23 Jan 2012 07:31:55 +0000 (07:31 +0000)]
bnx2x: handle CHIP_REVISION during init_one
The macro `CHIP_IS_E1x' requires `bp' to be initialized.
As `bp' is not yet initialized during this phase of `bnx2x_init_dev',
it accessed uninitialized fields in the struct.
(cherry picked from commit 65087cfee50595185f6bbf3d78272eeb34186d2b) Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Dmitry Kravkov [Tue, 30 Aug 2011 00:08:45 +0000 (00:08 +0000)]
bnx2x: don't access removed registers on 57712 and above
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a5c53dbcde9a156e8303acc6ecb2296bf609fe38)
Dmitry Kravkov [Tue, 9 Aug 2011 03:10:29 +0000 (03:10 +0000)]
bnx2x: properly clean indirect addresses
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 9f0096a1578bca77b28762c89b29affee69a20f4)
Dmitry Kravkov [Mon, 23 Jan 2012 07:31:54 +0000 (07:31 +0000)]
bnx2x: allow user to change ring size in ISCSI SD mode
(cherry picked from commit 1fdf155158886514c82e5401ab7b1264beb375bf) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Dmitry Kravkov [Mon, 23 Jan 2012 07:31:53 +0000 (07:31 +0000)]
bnx2x: fix Big-Endianess in ethtool -t
(cherry picked from commit b0700b1e6b9556aa99bb9bf6ad6d830ae38344c7) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yuval Mintz [Mon, 23 Jan 2012 07:31:52 +0000 (07:31 +0000)]
bnx2x: fixed ethtool statistics for MF modes
Previosuly, in MF modes `ethtool -S' lacked some of the statistics
which appeared in non-MF modes. This has been fixed.
(cherry picked from commit d5e836329bd836d24b168004827532426cad2f39) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yuval Mintz [Mon, 23 Jan 2012 07:31:51 +0000 (07:31 +0000)]
bnx2x: credit-leakage fixup on vlan_mac_del_all
Upon insertion of elements into the execution queue, it is validated
that there are enough credits to support additional vlan-macs,
and the credits are consumed. However, when removing a pending
command in `bnx2x_vland_mac_del_all' the consumed credits are not
released, which might cause leakage and eventually the inability to
add new vlan-macs in certain scenarios.
(cherry picked from commit 460a25cdaef1a2b6b8e14e371d868aa91b0e72e8) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Tue, 17 Jan 2012 02:33:29 +0000 (02:33 +0000)]
bnx2x: Disable AN KR work-around for BCM57810
Disable the work-around for the autoneg KR of the BCM57810 in case the Warpcore version is 0xD108 and above, which fixes this problem.
(cherry picked from commit 6ab48a5c86ce778188c173818cb2f1644526e962) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
Yaniv Rosner [Tue, 17 Jan 2012 02:33:28 +0000 (02:33 +0000)]
bnx2x: Remove AutoGrEEEn for BCM84833
Disable the autoGrEEEn feature for BCM84833.
(cherry picked from commit 096b9527db77defb2501509f2517d2ab24300d9c) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Joe Jin <joe.jin@oracle.com>
projects / users / jedix / linux-maple.git / log