Linus Torvalds [Sun, 16 Mar 2025 19:09:44 +0000 (09:09 -1000)]
Merge tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: fix irq ACKS to avoid irq storming and system hang
- ali1535, ali15x3, sis630: fix error path at probe exit
* tag 'i2c-for-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sis630: Fix an error handling path in sis630_probe()
i2c: ali15x3: Fix an error handling path in ali15x3_probe()
i2c: ali1535: Fix an error handling path in ali1535_probe()
i2c: omap: fix IRQ storms
Linus Torvalds [Sun, 16 Mar 2025 19:05:00 +0000 (09:05 -1000)]
Merge tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix ref count of trace_array in error path of histogram file open
Tracing instances have a ref count to keep them around while files
within their directories are open. This prevents them from being
deleted while they are used.
The histogram code had some files that needed to take the ref count
and that was added, but the error paths did not decrement the ref
counts. This caused the instances from ever being removed if a
histogram file failed to open due to some error"
* tag 'trace-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Correct the refcount if the hist/hist_debug file fails to open
Linus Torvalds [Sun, 16 Mar 2025 06:39:55 +0000 (20:39 -1000)]
Merge tag 'usb-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes and new
usb-serial device ids. Included in here are:
- new usb-serial device ids
- typec driver bugfix
- thunderbolt driver resume bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: fix state transition for SNK_WAIT_CAPABILITIES state in run_state_machine()
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
thunderbolt: Prevent use-after-free in resume from hibernate
USB: serial: option: fix Telit Cinterion FE990A name
USB: serial: option: add Telit Cinterion FE990B compositions
USB: serial: option: match on interface class for Telit FN990B
Miguel Ojeda [Sat, 15 Mar 2025 19:40:45 +0000 (20:40 +0100)]
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
`rustdoc` only recognizes `--remap-path-prefix` starting with
Rust 1.81.0, which is later than on minimum, so we cannot pass it
unconditionally. Otherwise, we get:
error: Unrecognized option: 'remap-path-prefix'
Note that `rustc` (the compiler) does recognize the flag since a long
time ago (1.26.0).
Moreover, `rustdoc` since Rust 1.82.0 ICEs in out-of-tree builds when
using `--remap-path-prefix`. The issue has been reduced and reported
upstream [1].
Thus workaround both issues by simply skipping the flag when generating
the docs -- it is not critical there anyway.
The ICE does not reproduce under `--test`, but we still need to skip
the flag as well for `RUSTDOC TK` since it is not recognized.
Fixes: dbdffaf50ff9 ("kbuild, rust: use -fremap-path-prefix to make paths relative") Link: https://github.com/rust-lang/rust/issues/138520 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Tamir Duberstein <tamird@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The double slashes ('//') between 'usr' and 'lib' are somewhat ugly.
Let's hardcode the module installation path because the package contents
should remain unaffected even if ${MODLIB} is overridden. Please note that
scripts/packages/{builddeb,kernel.spec} also hardcode the module
installation path.
With this change, the log will look better, as follows:
Thomas Weißschuh [Sat, 15 Mar 2025 13:20:14 +0000 (14:20 +0100)]
kbuild: make all file references relative to source root
-fmacro-prefix-map only affects __FILE__ and __BASE_FILE__.
Other references, for example in debug information, are not affected.
This makes handling of file references in the compiler outputs harder to
use and creates problems for reproducible builds.
Switch to -ffile-prefix map which affects all references.
Also drop the documentation section advising manual specification of
-fdebug-prefix-map for reproducible builds, as it is not necessary
anymore.
Linus Torvalds [Sun, 16 Mar 2025 01:46:29 +0000 (15:46 -1000)]
Merge tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
clock_set_rate should be executed after devm_clk_get_enabled.
Fixes: 97ad10bb2901 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled") Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20250312062016.137821-1-xxm@rock-chips.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Silvano Seva [Tue, 11 Mar 2025 08:49:49 +0000 (09:49 +0100)]
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifo
Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in
case pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Silvano Seva [Tue, 11 Mar 2025 08:49:47 +0000 (09:49 +0100)]
iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo
Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case
pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Torvalds [Sat, 15 Mar 2025 18:32:16 +0000 (08:32 -1000)]
Merge tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify reverts from Jan Kara:
"Syzbot has found out that fsnotify HSM events generated on page fault
can be generated while we already hold freeze protection for the
filesystem (when you do buffered write from a buffer which is mmapped
file on the same filesystem) which violates expectations for HSM
events and could lead to deadlocks of HSM clients with filesystem
freezing.
Since it's quite late in the cycle we've decided to revert changes
implementing HSM events on page fault for now and instead just
generate one event for the whole range on mmap(2) so that HSM client
can fetch the data at that moment"
* tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
Revert "fanotify: disable readahead if we have pre-content watches"
Revert "mm: don't allow huge faults for files with pre content watches"
Revert "fsnotify: generate pre-content permission event on page fault"
Revert "xfs: add pre-content fsnotify hook for DAX faults"
Revert "ext4: add pre-content fsnotify hook for DAX faults"
fsnotify: add pre-content hooks on mmap()
Nicolas Frattaroli [Fri, 14 Mar 2025 15:35:50 +0000 (16:35 +0100)]
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
The GPIO3 A4 pin on the ArmSoM Sige5 is routed to the 40-pin GPIO
header. This pin can serve a variety of functions, including ones of
questionable use to us on a GPIO header such as the 25MHz clock of the
ethernet controller.
Unfortunately, this is the precise function that it is being claimed for
by the gmac0 node in the Sige5 board dts, meaning it can't be used for
anything else despite serving no useful function in this role. Since it
goes through a RS0108 bidirectional voltage level translator with a
maximum data rate of 24Mbit/s in push-pull mode and 2Mbit/s data rate in
open-drain mode, it's doubtful as to whether the 25MHz clock signal
would even survive to the actual user-accessible pin it terminates in.
Remove it to leave the pin for users to play with. It's infinitely more
useful as a GPIO or even as a PWM.
Masahiro Yamada [Fri, 14 Mar 2025 09:53:35 +0000 (18:53 +0900)]
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
'man dpkg-deb' describes as follows:
DPKG_DEB_COMPRESSOR_TYPE
Sets the compressor type to use (since dpkg 1.21.10).
The -Z option overrides this value.
When commit 1a7f0a34ea7d ("builddeb: allow selection of .deb compressor")
was applied, dpkg-deb did not support this environment variable.
Later, dpkg commit c10aeffc6d71 ("dpkg-deb: Add support for
DPKG_DEB_COMPRESSOR_TYPE/LEVEL") introduced support for
DPKG_DEB_COMPRESSOR_TYPE, which provides the same functionality as
KDEB_COMPRESS.
KDEB_COMPRESS is still useful for users of older dpkg versions, but I
would like to remove this redundant functionality in the future.
This commit adds comments to notify users of the planned removal and to
encourage migration to DPKG_DEB_COMPRESSOR_TYPE where possible.
Ard Biesheuvel [Tue, 11 Mar 2025 11:06:21 +0000 (12:06 +0100)]
x86: Get rid of Makefile.postlink
Instead of generating the vmlinux.relocs file (needed by the
decompressor build to construct the KASLR relocation tables) as a
vmlinux postlink step, which is dubious because it depends on data that
is stripped from vmlinux before the build completes, generate it from
vmlinux.unstripped, which has been introduced specifically for this
purpose.
This ensures that each artifact is rebuilt as needed, rather than as a
side effect of another build rule.
This effectively reverts commit
9d9173e9ceb6 ("x86/build: Avoid relocation information in final vmlinux")
Ard Biesheuvel [Tue, 11 Mar 2025 11:06:20 +0000 (12:06 +0100)]
kbuild: Create intermediate vmlinux build with relocations preserved
The imperative paradigm used to build vmlinux, extract some info from it
or perform some checks on it, and subsequently modify it again goes
against the declarative paradigm that is usually employed for defining
make rules.
In particular, the Makefile.postlink files that consume their input via
an output rule result in some dodgy logic in the decompressor makefiles
for RISC-V and x86, given that the vmlinux.relocs input file needed to
generate the arch-specific relocation tables may not exist or be out of
date, but cannot be constructed using the ordinary Make dependency based
rules, because the info needs to be extracted while vmlinux is in its
ephemeral, non-stripped form.
So instead, for architectures that require the static relocations that
are emitted into vmlinux when passing --emit-relocs to the linker, and
are subsequently stripped out again, introduce an intermediate vmlinux
target called vmlinux.unstripped, and organize the reset of the build
logic accordingly:
- vmlinux.unstripped is created only once, and not updated again
- build rules under arch/*/boot can depend on vmlinux.unstripped without
running the risk of the data disappearing or being out of date
- the final vmlinux generated by the build is not bloated with static
relocations that are never needed again after the build completes.
Ard Biesheuvel [Tue, 11 Mar 2025 11:06:19 +0000 (12:06 +0100)]
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
Some architectures build vmlinux with static relocations preserved, but
strip them again from the final vmlinux image. Arch specific tools
consume these static relocations in order to construct relocation tables
for KASLR.
The fact that vmlinux is created, consumed and subsequently updated goes
against the typical, declarative paradigm used by Make, which is based
on rules and dependencies. So as a first step towards cleaning this up,
introduce a Kconfig symbol to declare that the arch wants to consume the
static relocations emitted into vmlinux. This will be wired up further
in subsequent patches.
Ard Biesheuvel [Tue, 11 Mar 2025 11:06:18 +0000 (12:06 +0100)]
kbuild: link-vmlinux.sh: Make output file name configurable
In order to introduce an intermediate, non-stripped vmlinux build that
can be used by other build steps as an input, pass the output file name
to link-vmlinux.sh via its command line.
Masahiro Yamada [Thu, 13 Mar 2025 10:26:03 +0000 (19:26 +0900)]
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Commit 5cc124720461 ("kbuild: add CONFIG_VMLINUX_MAP expert option")
mentioned that "the .map file can be rather large (several MB), and
that's a waste of space when one isn't interested in these things."
If that is the case, generating map files for the intermediate
tmp_vmlinux* files is also a waste of space. It is unlikely that
anyone would be interested in the .tmp_vmlinux*.map files.
This commit stops passing the -Map= option when linking the .tmp_vmlinux*
intermediates.
I also hard-coded the file name 'vmlinux.map' instead of ${output}.map
because a later commit will introduce vmlinux.unstripped but I want to
keep the current name of the map file.
As I mentioned in the review [1], I do not believe this was the correct
fix.
Commit 41a00051283e ("kheaders: prevent `find` from seeing perl temp
files") addressed the root cause of the issue. I asked David to test
it but received no response.
Commit 973b710b8821 ("kheaders: Ignore silly-rename files") merely
worked around the issue by excluding such files, rather than preventing
their creation.
I have reverted the latter commit, hoping the issue has already been
resolved by the former. If the silly-rename files come back, I will
restore this change (or preferably, investigate the root cause).
Kris Van Hees [Fri, 7 Mar 2025 16:53:28 +0000 (11:53 -0500)]
kbuild: exclude .rodata.(cst|str)* when building ranges
The .rodata.(cst|str)* sections are often resized during the final
linking and since these sections do not cover actual symbols there is
no need to include them in the modules.builtin.ranges data.
When these sections were included in processing and resizing occurred,
modules were reported with ranges that extended beyond their true end,
causing subsequent symbols (in address order) to be associated with
the wrong module.
Fixes: 5f5e7344322f ("kbuild: generate offset range data for builtin modules") Cc: stable@vger.kernel.org Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com> Reviewed-by: Jack Vogel <jack.vogel@oracle.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Thu, 6 Mar 2025 15:56:22 +0000 (00:56 +0900)]
kbuild: add Kbuild bash completion
Kernel build commands can sometimes be long, particularly when
cross-compiling, making them tedious to type and prone to mistypes.
This commit introduces bash completion support for common variables
and targets in Kbuild.
For installation instructions, please refer to the documentation in
Documentation/kbuild/bash-completion.rst.
The following examples demonstrate how this saves typing.
[Example 1] a long command line for cross-compiling
$ make A<TAB>
-> completes 'A' to 'ARCH='
$ make ARCH=<TAB>
-> displays all supported architectures
$ make ARCH=arm64 CR<TAB>
-> completes 'CR' to 'CROSS_COMPILE='
$ make ARCH=arm64 CROSS_COMPILE=<TAB>
-> displays installed toolchains
$ make ARCH=arm64 CROSS_COMPILE=aa<TAB>
-> completes 'CROSS_COMPILE=aa' to 'CROSS_COMPILE=aarch64-linux-gnu-'
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- def<TAB>
-> completes 'def' to 'defconfig'
[Example 2] a single build target
$ make f<TAB>
-> completes 'f' to 'fs/'
$ make fs/<TAB>
-> displays objects and sub-directories in fs/
$ make fs/xf<TAB>
-> completes 'fs/xf' to 'fs/xfs/'
$ make fs/xfs/l<TAB>
-> completes 'fs/xfs/l' to 'fs/xfs/libxfs/xfs_'
$ make fs/xfs/libxfs/xfs_g<TAB>
-> completes 'fs/xfs/libxfs/xfs_g' to 'fs/xfs/libxfs/xfs_group.o'
This does not aim to provide a complete list of variables and targets,
as there are too many. However, it covers variables and targets used
in common scenarios, and I hope this is useful enough.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de> Tested-by: Nicolas Schier <n.schier@avm.de>
Seyediman Seyedarab [Sat, 1 Mar 2025 22:21:37 +0000 (17:21 -0500)]
kbuild: fix argument parsing in scripts/config
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Xi Ruoyao [Wed, 26 Feb 2025 13:30:14 +0000 (21:30 +0800)]
kbuild: add dependency from vmlinux to sorttable
Without this dependency it's really puzzling when we bisect for a "bad"
commit in a series of sorttable change: when "git bisect" switches to
another commit, "make" just does nothing to vmlinux.
Signed-off-by: Xi Ruoyao <xry111@xry111.site> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
WangYuli [Mon, 24 Feb 2025 18:26:19 +0000 (02:26 +0800)]
kbuild: deb-pkg: add debarch for ARCH=loongarch64
Fix follow warning when 'make ARCH=loongarch64 bindeb-pkg':
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (loong64).
Please add support for loongarch64 to ./scripts/package/mkdebian ...
Thomas Weißschuh [Wed, 19 Feb 2025 21:22:13 +0000 (22:22 +0100)]
kbuild, rust: use -fremap-path-prefix to make paths relative
Remap source path prefixes in all output, including compiler
diagnostics, debug information, macro expansions, etc.
This removes a few absolute paths from the binary and also makes it
possible to use core::panic::Location properly.
Equivalent to the same configuration done for C sources in
commit 1d3730f0012f ("kbuild: support -fmacro-prefix-map for external
modules") and commit a73619a845d5 ("kbuild: use -fmacro-prefix-map to
make __FILE__ a relative path").
Thomas Weißschuh [Mon, 17 Feb 2025 10:59:21 +0000 (11:59 +0100)]
kbuild: implement CONFIG_HEADERS_INSTALL for Usermode Linux
userprogs sometimes need access to UAPI headers.
This is currently not possible for Usermode Linux, as UM is only
a pseudo architecture built on top of a regular architecture and does
not have its own UAPI.
Instead use the UAPI headers from the underlying regular architecture.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Krzysztof Kozlowski [Mon, 17 Feb 2025 11:31:53 +0000 (12:31 +0100)]
docs: kconfig: Mention IS_REACHABLE as way for optional dependency
Several drivers express optional Kconfig dependency with FOO || !FOO,
but for many choices this is not suitable: lack of stubs for !FOO
like in HWMON. Describe the second, less favorable way of optional
dependency with IS_REACHABLE by moving the code from "imply" chapter to
"Optional dependencies".
Masahiro Yamada [Mon, 17 Feb 2025 11:36:48 +0000 (20:36 +0900)]
kbuild: remove KBUILD_ENABLE_EXTRA_GCC_CHECKS support
Commit e27128db6283 ("kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to
KBUILD_EXTRA_WARN") renamed KBUILD_ENABLE_EXTRA_GCC_CHECKS in 2019.
The migration in downstream code should be complete.
Uday Shankar [Tue, 11 Feb 2025 01:11:54 +0000 (18:11 -0700)]
scripts: make python shebangs specific about desired version
The RPM packaging tools like to make sure that all packaged python
scripts have version-unambiguous shebangs. Be more specific about the
desired python version in a couple of places to avoid having to disable
these checks in make rpm-pkg.
Miguel Ojeda [Mon, 10 Feb 2025 16:42:45 +0000 (17:42 +0100)]
kbuild: rust: add rustc-min-version support function
Introduce `rustc-min-version` support function that mimics
`{gcc,clang}-min-version` ones, following commit 88b61e3bff93
("Makefile.compiler: replace cc-ifversion with compiler-specific macros").
In addition, use it in the first use case we have in the kernel (which
was done independently to minimize the changes needed for the fix).
Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Fiona Behrens <me@Kloenk.dev> Reviewed-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Fri, 7 Feb 2025 18:41:55 +0000 (03:41 +0900)]
kconfig: do not clear SYMBOL_VALID when reading include/config/auto.conf
When conf_read_simple() is called with S_DEF_AUTO, it is meant to read
previous symbol values from include/config/auto.conf to determine which
include/config/* files should be touched.
This process should not modify the current symbol status in any way.
However, conf_touch_deps() currently invalidates all symbol values and
recalculates them, which is totally unneeded.
Masahiro Yamada [Wed, 5 Feb 2025 17:18:02 +0000 (02:18 +0900)]
gen_compile_commands.py: remove code for '\#' replacement
Since commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for
future Make"), '#' in the build command is replaced with $(pound) rather
than '\#'.
Calling .replace(r'\#', '#') is only necessary when this tool is used
to parse .*.cmd files generated by Linux 4.16 or earlier, which is
unlikely to happen.
Masahiro Yamada [Wed, 5 Feb 2025 16:39:38 +0000 (01:39 +0900)]
kbuild: remove EXTRA_*FLAGS support
Commit f77bf01425b1 ("kbuild: introduce ccflags-y, asflags-y and
ldflags-y") deprecated these in 2007. The migration should have been
completed by now.
projects / users / willy / pagecache.git / log