Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synchronize the ring usage for vcn1 and jpeg1 to workaround a hardware bug.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.
Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.
Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().
Fix linkage error when CONFIG_BINFMT_ELF is selected but CONFIG_COREDUMP
is not:
ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_phdrs':
elfcore.c:(.text+0x172): undefined reference to `dump_emit'
ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_data':
elfcore.c:(.text+0x2b2): undefined reference to `dump_emit'
Fixes: 1fcccbac89f5 ("elf coredump: replace ELF_CORE_EXTRA_* macros by functions") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200819064146.12529-1-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A detach hung is possible when a race occurs between the detach process
and the ubi background thread. The following sequences outline the race:
ubi thread: if (list_empty(&ubi->works)...
ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags)
=> by kthread_stop()
wake_up_process()
=> ubi thread is still running, so 0 is returned
ubi thread: set_current_state(TASK_INTERRUPTIBLE)
schedule()
=> ubi thread will never be scheduled again
ubi detach: wait_for_completion()
=> hung task!
To fix that, we need to check kthread_should_stop() after we set the
task state, so the ubi thread will either see the stop bit and exit or
the task state is reset to runnable such that it isn't scheduled out
indefinitely.
commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
The problem is in the is_printable_array function that does not take the
zero byte into account and claim such string as not printable, so the
code will create byte array instead of string.
There is no need to dump authentication options while remounting,
because authentication initialization can only be doing once in
the first mount process. Dumping authentication mount options in
remount process may cause memory leak if UBIFS has already been
mounted with old authentication mount options.
When removing the last reference of an inode the size of an auth node
is already part of write_len. So we must not call ubifs_add_auth_dirt().
Call it only when needed.
Fix some potential memory leaks in error handling branches while
iterating xattr entries. For example, function ubifs_tnc_remove_ino()
forgets to free pxent if it exists. Similar problems also exist in
ubifs_purge_xattrs(), ubifs_add_orphan() and ubifs_jnl_write_inode().
Fix some potential memory leaks in error handling branches while
iterating dent entries. For example, function dbg_check_dir()
forgets to free pdent if it exists.
There's no protection in nfsd_dispatch() against a NULL .pc_func
helpers. A malicious NFS client can trigger a crash by invoking the
unused/unsupported NFSv2 ROOT or WRITECACHE procedures.
The current NFSD dispatcher does not support returning a void reply
to a non-NULL procedure, so the reply to both of these is wrong, for
the moment.
Cc: <stable@vger.kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0e0cb35b417f ("NFSv4: Handle NFS4ERR_OLD_STATEID in
CLOSE/OPEN_DOWNGRADE") the following livelock may occur if a CLOSE races
with the update of the nfs_state:
Process 1 Process 2 Server
========= ========= ========
OPEN file
OPEN file
Reply OPEN (1)
Reply OPEN (2)
Update state (1)
CLOSE file (1)
Reply OLD_STATEID (1)
CLOSE file (2)
Reply CLOSE (-1)
Update state (2)
wait for state change
OPEN file
wake
CLOSE file
OPEN file
wake
CLOSE file
...
...
We can avoid this situation by not issuing an immediate retry with a bumped
seqid when CLOSE/OPEN_DOWNGRADE receives NFS4ERR_OLD_STATEID. Instead,
take the same approach used by OPEN and wait at least 5 seconds for
outstanding stateid updates to complete if we can detect that we're out of
sequence.
Note that after this change it is still possible (though unlikely) that
CLOSE waits a full 5 seconds, bumps the seqid, and retries -- and that
attempt races with another OPEN at the same time. In order to avoid this
race (which would result in the livelock), update
nfs_need_update_open_stateid() to handle the case where:
- the state is NFS_OPEN_STATE, and
- the stateid doesn't match the current open stateid
Finally, nfs_need_update_open_stateid() is modified to be idempotent and
renamed to better suit the purpose of signaling that the stateid passed
is the next stateid in sequence.
Fixes: 0e0cb35b417f ("NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only initialize gl_delete for iopen glocks, but more importantly, only access
it for iopen glocks in flush_delete_work: flush_delete_work is called for
different types of glocks including rgrp glocks, and those use gl_vm which is
in a union with gl_delete. Without this fix, we'll end up clobbering gl_vm,
which results in general memory corruption.
Fixes: a0e3cc65fa29 ("gfs2: Turn gl_delete into a delayed work") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ca399c96e96e changes gfs2_log_flush to not withdraw the
filesystem while holding the log flush lock, but it fails to check if
the filesystem needs to be withdrawn once the log flush lock has been
released. Likewise, commit f05b86db314d depends on gfs2_log_flush to
trigger for delayed withdraws. Add that and clean up the code flow
somewhat.
In gfs2_put_super, add a check for delayed withdraws that have been
missed to prevent these kinds of bugs in the future.
Fixes: ca399c96e96e ("gfs2: flesh out delayed withdraw for gfs2_log_flush") Fixes: f05b86db314d ("gfs2: Prepare to withdraw as soon as an IO error occurs in log write") Cc: stable@vger.kernel.org # v5.7+: 462582b99b607: gfs2: add some much needed cleanup for log flushes that fail Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_poll_double_wake() is called for both request types - both pure poll
requests, and internal polls. This means that we should be using the
right handler based on the request type. Use the one that the original
caller already assigned for the waitqueue handling, that will always
match the correct type.
When the bio's size reaches max_append_sectors, bio_add_hw_page returns
0 then __bio_iov_append_get_pages returns -EINVAL. This is an expected
result of building a small enough bio not to be split in the IO path.
However, iov_iter is not advanced in this case, causing the same pages
are filled for the bio again and again.
Fix the case by properly advancing the iov_iter for already processed
pages.
We need r1 to be properly set before activating MMU, otherwise any new
exception taken while saving registers into the stack in exception
prologs will use the user stack, which is wrong and will even lockup
or crash when KUAP is selected.
Do that by switching the meaning of r11 and r1 until we have saved r1
to the stack: copy r1 into r11 and setup the new stack pointer in r1.
To avoid complicating and impacting all generic and specific prolog
code (and more), copy back r1 into r11 once r11 is save onto
the stack.
We could get rid of copying r1 back and forth at the cost of
rewriting everything to use r1 instead of r11 all the way when
CONFIG_VMAP_STACK is set, but the effort is probably not worth it.
We need r1 to be properly set before activating MMU, so
reading task_struct->stack must be done with MMU off.
This means we need an additional register to play with MSR
bits while r11 now points to the stack. For that, move r10
back to CR (As is already done for hash MMU) and use r10.
We still don't have r1 correct yet when we activate MMU.
It is done in following patch.
__get_user_atomic_128_aligned() stores to kaddr using stvx which is a
VMX store instruction, hence kaddr must be 16 byte aligned otherwise
the store won't occur as expected.
Unfortunately when we call __get_user_atomic_128_aligned() in
p9_hmi_special_emu(), the buffer we pass as kaddr (ie. vbuf) isn't
guaranteed to be 16B aligned. This means that the write to vbuf in
__get_user_atomic_128_aligned() has the bottom bits of the address
truncated. This results in other local variables being
overwritten. Also vbuf will not contain the correct data which results
in the userspace emulation being wrong and hence undetected user data
corruption.
In the past we've been mostly lucky as vbuf has ended up aligned but
this is fragile and isn't always true. CONFIG_STACKPROTECTOR in
particular can change the stack arrangement enough that our luck runs
out.
This issue only occurs on POWER9 Nimbus <= DD2.1 bare metal.
The fix is to align vbuf to a 16 byte boundary.
Fixes: 5080332c2c89 ("powerpc/64s: Add workaround for P9 vector CI load issue") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201013043741.743413-1-mikey@neuling.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of nmi_enter/exit in real mode handler causes the kernel to panic
and reboot on injecting SLB mutihit on pseries machine running in hash
MMU mode, because these calls try to accesses memory outside RMO
region in real mode handler where translation is disabled.
Add check to not to use these calls on pseries machine running in hash
MMU mode.
Every error log reported by OPAL is exported to userspace through a
sysfs interface and notified using kobject_uevent(). The userspace
daemon (opal_errd) then reads the error log and acknowledges the error
log is saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.
However it's possible the userspace daemon may already be scanning
elog entries when a new sysfs elog entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
elog_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash. eg:
BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6bfb
Faulting instruction address: 0xc0000000008ff2a0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
CPU: 27 PID: 805 Comm: irq/29-opal-elo Not tainted 5.9.0-rc2-gcc-8.2.0-00214-g6f56a67bcbb5-dirty #363
...
NIP kobject_uevent_env+0xa0/0x910
LR elog_event+0x1f4/0x2d0
Call Trace:
0x5deadbeef0000122 (unreliable)
elog_event+0x1f4/0x2d0
irq_thread_fn+0x4c/0xc0
irq_thread+0x1c0/0x2b0
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x6c
This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().
The function create_elog_obj() returns the elog object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_elog_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.
Fixes: 774fea1a38c6 ("powerpc/powernv: Read OPAL error log and export it through sysfs") Cc: stable@vger.kernel.org # v3.15+ Reported-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Rework the logic to use a single return, reword comments, add oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201006122051.190176-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to commit 89c140bbaeee ("pseries: Fix 64 bit logical memory block panic")
make sure different variables tracking lmb_size are updated to be 64 bit.
It's not done anything for a long time. Save the percpu variable, and
emit a warning to remind users to not expect it to do anything.
This uses pr_warn_once instead of pr_warn_ratelimit as testing
'ppc64_cpu --smt=off' on a 24 core / 4 SMT system showed the warning
to be noisy, as the online/offline loop is slow.
Fixes: 3fa8cad82b94 ("powerpc/pseries/cpuidle: smt-snooze-delay cleanup.") Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200902000012.3440389-1-joel@jms.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of userspace utilities depend on making calls to RTAS to retrieve
information and update various things.
The existing API through which we expose RTAS to userspace exposes more
RTAS functionality than we actually need, through the sys_rtas syscall,
which allows root (or anyone with CAP_SYS_ADMIN) to make any RTAS call they
want with arbitrary arguments.
Many RTAS calls take the address of a buffer as an argument, and it's up to
the caller to specify the physical address of the buffer as an argument. We
allocate a buffer (the "RMO buffer") in the Real Memory Area that RTAS can
access, and then expose the physical address and size of this buffer in
/proc/powerpc/rtas/rmo_buffer. Userspace is expected to read this address,
poke at the buffer using /dev/mem, and pass an address in the RMO buffer to
the RTAS call.
However, there's nothing stopping the caller from specifying whatever
address they want in the RTAS call, and it's easy to construct a series of
RTAS calls that can overwrite arbitrary bytes (even without /dev/mem
access).
Additionally, there are some RTAS calls that do potentially dangerous
things and for which there are no legitimate userspace use cases.
In the past, this would not have been a particularly big deal as it was
assumed that root could modify all system state freely, but with Secure
Boot and lockdown we need to care about this.
We can't fundamentally change the ABI at this point, however we can address
this by implementing a filter that checks RTAS calls against a list
of permitted calls and forces the caller to use addresses within the RMO
buffer.
The list is based off the list of calls that are used by the librtas
userspace library, and has been tested with a number of existing userspace
RTAS utilities. For compatibility with any applications we are not aware of
that require other calls, the filter can be turned off at build time.
Cc: stable@vger.kernel.org Reported-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820044512.7543-1-ajd@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs function might race with stp_work_fn. To prevent that,
add the required locking. Another issue is that the sysfs functions
are checking the stp_online flag, but this flag just holds the user
setting whether STP is enabled. Add a flag to clock_sync_flag whether
stp_info holds valid data and use that instead.
Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since INGENIC_GENERIC_BOARD was introduced, the JZ4740_QI_LB60 option
is no longer the default, so the symbol has to be selected by the
defconfig, otherwise the kernel built will be for a generic Ingenic
board and won't have the Device Tree blob built-in.
Cc: stable@vger.kernel.org # v5.7 Fixes: 62249209a772 ("MIPS: ingenic: Default to a generic board") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
caused by an attempt to free bootmem space that as from
commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources")
has not been anymore reserved due to the removal of generic MIPS arch code
that used to reserve all the memory from the beginning of RAM up to the
kernel load address.
This memory does need to be reserved on DEC platforms however as it is
used by REX firmware as working area, as per the TURBOchannel firmware
specification[1]:
Table 2-2 REX Memory Regions
-------------------------------------------------------------------------
Starting Ending
Region Address Address Use
-------------------------------------------------------------------------
0 0xa0000000 0xa000ffff Restart block, exception vectors,
REX stack and bss
1 0xa0010000 0xa0017fff Keyboard or tty drivers
2 0xa0018000 0xa001f3ff 1) CRT driver
3 0xa0020000 0xa002ffff boot, cnfg, init and t objects
4 0xa0020000 0xa002ffff 64KB scratch space
-------------------------------------------------------------------------
1) Note that the last 3 Kbytes of region 2 are reserved for backward
compatibility with previous system software.
-------------------------------------------------------------------------
(this table uses KSEG2 unmapped virtual addresses, which in the MIPS
architecture are offset from physical addresses by a fixed value of
0xa0000000 and therefore the regions referred do correspond to the
beginning of the physical address space) and we call into the firmware
on several occasions throughout the bootstrap process. It is believed
that pre-REX firmware used with non-TURBOchannel DEC platforms has the
same requirements, as hinted by note #1 cited.
Recreate the discarded reservation then, in DEC platform code, removing
the crash.
References:
[1] "TURBOchannel Firmware Specification", On-line version,
EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993,
Chapter 2 "System Module Firmware", p. 2-5
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The rcu_tasks_trace_postgp() function uses for_each_process_thread()
to scan the task list without the benefit of RCU read-side protection,
which can result in use-after-free errors on task_struct structures.
This error was missed because the TRACE01 rcutorture scenario enables
lockdep, but also builds with CONFIG_PREEMPT_NONE=y. In this situation,
preemption is disabled everywhere, so lockdep thinks everywhere can
be a legitimate RCU reader. This commit therefore adds the needed
rcu_read_lock() and rcu_read_unlock().
Note that this bug can occur only after an RCU Tasks Trace CPU stall
warning, which by default only happens after a grace period has extended
for ten minutes (yes, not a typo, minutes).
Fixes: 4593e772b502 ("rcu-tasks: Add stall warnings for RCU Tasks Trace") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When rcu_tasks_trace_postgp() function detects an RCU Tasks Trace
CPU stall, it adds all tasks blocking the current grace period to
a list, invoking get_task_struct() on each to prevent them from
being freed while on the list. It then traverses that list,
printing stall-warning messages for each one that is still blocking
the current grace period and removing it from the list. The list
removal invokes the matching put_task_struct().
This of course means that in the admittedly unlikely event that some
task executes its outermost rcu_read_unlock_trace() in the meantime, it
won't be removed from the list and put_task_struct() won't be executing,
resulting in a task_struct leak. This commit therefore makes the list
removal and put_task_struct() unconditional, stopping the leak.
Note further that this bug can occur only after an RCU Tasks Trace CPU
stall warning, which by default only happens after a grace period has
extended for ten minutes (yes, not a typo, minutes).
Fixes: 4593e772b502 ("rcu-tasks: Add stall warnings for RCU Tasks Trace") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The more intense grace-period processing resulting from the 50x RCU
Tasks Trace grace-period speedups exposed the following race condition:
o Task A running on CPU 0 executes rcu_read_lock_trace(),
entering a read-side critical section.
o When Task A eventually invokes rcu_read_unlock_trace()
to exit its read-side critical section, this function
notes that the ->trc_reader_special.s flag is zero and
and therefore invoke wil set ->trc_reader_nesting to zero
using WRITE_ONCE(). But before that happens...
o The RCU Tasks Trace grace-period kthread running on some other
CPU interrogates Task A, but this fails because this task is
currently running. This kthread therefore sends an IPI to CPU 0.
o CPU 0 receives the IPI, and thus invokes trc_read_check_handler().
Because Task A has not yet cleared its ->trc_reader_nesting
counter, this function sees that Task A is still within its
read-side critical section. This function therefore sets the
->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag.
Except that Task A has already checked the .need_qs flag, which
is part of the ->trc_reader_special.s flag. The .need_qs flag
therefore remains set until Task A's next rcu_read_unlock_trace().
o Task A now invokes synchronize_rcu_tasks_trace(), which cannot
start a new grace period until the current grace period completes.
And thus cannot return until after that time.
But Task A's .need_qs flag is still set, which prevents the current
grace period from completing. And because Task A is blocked, it
will never execute rcu_read_unlock_trace() until its call to
synchronize_rcu_tasks_trace() returns.
We are therefore deadlocked.
This race is improbable, but 80 hours of rcutorture made it happen twice.
The race was possible before the grace-period speedup, but roughly 50x
less probable. Several thousand hours of rcutorture would have been
necessary to have a reasonable chance of making this happen before this
50x speedup.
This commit therefore eliminates this deadlock by setting
->trc_reader_nesting to a large negative number before checking the
.need_qs and zeroing (or decrementing with respect to its initial
value) ->trc_reader_nesting. For its part, the IPI handler's
trc_read_check_handler() function adds a check for negative values,
deferring evaluation of the task in this case. Taken together, these
changes avoid this deadlock scenario.
Fixes: 276c410448db ("rcu-tasks: Split ->trc_reader_need_end") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to commit 89c140bbaeee ("pseries: Fix 64 bit logical memory block panic")
make sure different variables tracking lmb_size are updated to be 64 bit.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
This is fixed by using an explicit c structure. As there are no
holes in the structure, there is no possiblity of data leakage
in this case.
The explicit alignment of ts is not strictly necessary but potentially
makes the code slightly less fragile. It also removes the possibility
of this being cut and paste into another driver where the alignment
isn't already true.
Fixes: 36e0371e7764 ("iio:itg3200: Use iio_push_to_buffers_with_timestamp()") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-6-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to an array of suitable structures in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart from
previous readings.
For the tagged path the data is aligned by using __aligned(8) for
the buffer on the stack.
There has been a lot of churn in this driver, so likely backports
may be needed for stable.
Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-17-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
We move to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak apart from previous readings. Note that previously
no leak at all could occur, but previous readings should never
be a problem.
In this case the timestamp location depends on what other channels
are enabled. As such we can't use a structure without misleading
by suggesting only one possible timestamp location.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
We fix this issues by moving to a suitable structure in the iio_priv()
data with alignment explicitly requested. This data is allocated
with kzalloc so no data can leak apart from previous readings.
Note that previously no data could leak 'including' previous readings
but I don't think it is an issue to potentially leak them like
this now does.
In this case the postioning of the timestamp is depends on what
other channels are enabled. As such we cannot use a structure to
make the alignment explicit as it would be missleading by suggesting
only one possible location for the timestamp.
When returning or breaking early from a
`for_each_available_child_of_node()` loop, we need to explicitly call
`of_node_put()` on the child node to possibly release the node.
Fixes: 506d2e317a0a0 ("iio: adc: Add driver support for AD7292") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200925091045.302-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 24 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Depending on the enabled channels, the location of the timestamp
can be at various aligned offsets through the buffer. As such we
any use of a structure to enforce this alignment would incorrectly
suggest a single location for the timestamp. Comments adjusted to
express this clearly in the code.
Fixes: ac45e57f1590 ("iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-9-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This case is a bit different to the rest of the series. The driver
was doing a regmap_bulk_read into a buffer that wasn't dma safe
as it was on the stack with no guarantee of it being in a cacheline
on it's own. Fixing that also dealt with the data leak and
alignment issues that Lars-Peter pointed out.
Also removed some unaligned handling as we are now aligned.
Fixes tag is for the dma safe buffer issue. Potentially we would
need to backport timestamp alignment futher but that is a totally
different patch.
Fixes: fd64df16f40e ("iio: imu: inv_mpu6050: Add SPI support for MPU6000") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200722155103.979802-18-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the move of the postenable code to preenable, the DMA start was
done before the DMA init, which is not correct.
The DMA is initialized in set_watermark. Because of this, we need to call
the DMA start functions in set_watermark, after the DMA init, instead of
preenable hook, when the DMA is not properly setup yet.
When returning or breaking early from a
`for_each_available_child_of_node()` loop, we need to explicitly call
`of_node_put()` on the child node to possibly release the node.
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200925091045.302-1-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we forward an mmap to the dma_buf exporter, they get to own
everything. Unfortunately drm_gem_mmap_obj() overwrote
vma->vm_private_data after the driver callback, wreaking the
exporter complete. This was noticed because vb2_common_vm_close blew
up on mali gpu with panfrost after commit 26d3ac3cb04d
("drm/shmem-helpers: Redirect mmap for imported dma-buf").
Unfortunately drm_gem_mmap_obj also acquires a surplus reference that
we need to drop in shmem helpers, which is a bit of a mislayer
situation. Maybe the entire dma_buf_mmap forwarding should be pulled
into core gem code.
Note that the only two other drivers which forward mmap in their own
code (etnaviv and exynos) get this somewhat right by overwriting the
gem mmap code. But they seem to still have the leak. This might be a
good excuse to move these drivers over to shmem helpers completely.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: <stable@vger.kernel.org> # v5.9+ Reported-and-tested-by: piotr.oniszczuk@gmail.com Cc: piotr.oniszczuk@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027214922.3566743-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The jz4780_dma_tx_status() function would check if a channel's cookie
state was set to 'completed', and if not, it would enter the critical
section. However, in that time frame, the jz4780_dma_chan_irq() function
was able to set the cookie to 'completed', and clear the jzchan->vchan
pointer, which was deferenced in the critical section of the first
function.
Fix this race by checking the channel's cookie state after entering the
critical function and not before.
Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller") Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
udf_process_sequence() allocates temporary array for processing
partition descriptors on volume which it fails to free. Free the array
when it is not needed anymore.
Fixes: 7b78fd02fb19 ("udf: Fix handling of Partition Descriptors") CC: stable@vger.kernel.org Reported-by: syzbot+128f4dd6e796c98b3760@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fault is due to hugetlb_free_pgd_range() freeing page tables
that are also used by regular pages.
As explain in the comment at the beginning of
hugetlb_free_pgd_range(), the verification done in free_pgd_range()
on floor and ceiling is not done here, which means
hugetlb_free_pte_range() can free outside the expected range.
As the verification cannot be done in hugetlb_free_pgd_range(), it
must be done in hugetlb_free_pte_range().
Below race can come, if trace_open and resize of
cpu buffer is running parallely on different cpus
CPUX CPUY
ring_buffer_resize
atomic_read(&buffer->resize_disabled)
tracing_open
tracing_reset_online_cpus
ring_buffer_reset_cpu
rb_reset_cpu
rb_update_pages
remove/insert pages
resetting pointer
This race can cause data abort or some times infinte loop in
rb_remove_pages and rb_insert_pages while checking pages
for sanity.
Take buffer lock to fix this.
Link: https://lkml.kernel.org/r/1601976833-24377-1-git-send-email-gkohli@codeaurora.org Cc: stable@vger.kernel.org Fixes: b23d7a5f4a07a ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU") Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to the commit that this one fixes, the FIFO size was derived from
the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following
formula:
TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1)
The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A
LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ
being equal to 4, and in the register description for LPUARTx_FIFO, it
shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011",
even though these registers read as "101" in reality.
And when LPUART on LS1021A was working, the "101" value did correspond
to "16 datawords", by applying the formula above, even though the
documentation is wrong again (!!!!) and says that "101" means 64 datawords
(hint: it doesn't).
So the "new" formula created by commit f77ebb241ce0 has all the premises
of being wrong for LS1021A, because it relied only on false data and no
actual experimentation.
Interestingly, in commit c2f448cff22a ("tty: serial: fsl_lpuart: add
LS1028A support"), Michael Walle applied a workaround to this by manually
setting the FIFO widths for LS1028A. It looks like the same values are
used by LS1021A as well, in fact.
When the driver thinks that it has a deeper FIFO than it really has,
getty (user space) output gets truncated.
Many thanks to Michael for pointing out where to look.
Fixes: f77ebb241ce0 ("tty: serial: fsl_lpuart: correct the FIFO depth size") Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com
Reviewed-by：Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 293f89959483 ("tty: serial: 21285: stop using the unused[]
variable from struct uart_port") introduced a bug which stops the
transmit interrupt being disabled when there are no characters to
transmit - disabling the transmit interrupt at the interrupt controller
is the only way to stop an interrupt storm. If this interrupt is not
disabled when there are no transmit characters, we end up with an
interrupt storm which prevents the machine making forward progress.
Fixes: 293f89959483 ("tty: serial: 21285: stop using the unused[] variable from struct uart_port") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/E1kU4GS-0006lE-OO@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has recently been reported that the "heartbeat" report from devices
like the 2nd-gen Intuos Pro (PTH-460, PTH-660, PTH-860) or the 2nd-gen
Bluetooth-enabled Intuos tablets (CTL-4100WL, CTL-6100WL) can cause the
driver to send a spurious BTN_TOUCH=0 once per second in the middle of
drawing. This can result in broken lines while drawing on Chrome OS.
The source of the issue has been traced back to a change which modified
the driver to only call `wacom_wac_pad_report()` once per report instead
of once per collection. As part of this change, pad-handling code was
removed from `wacom_wac_collection()` under the assumption that the
`WACOM_PEN_FIELD` and `WACOM_TOUCH_FIELD` checks would not be satisfied
when a pad or battery collection was being processed.
To be clear, the macros `WACOM_PAD_FIELD` and `WACOM_PEN_FIELD` do not
currently check exclusive conditions. In fact, most "pad" fields will
also appear to be "pen" fields simply due to their presence inside of
a Digitizer application collection. Because of this, the removal of
the check from `wacom_wac_collection()` just causes pad / battery
collections to instead trigger a call to `wacom_wac_pen_report()`
instead. The pen report function in turn resets the tip switch state
just prior to exiting, resulting in the observed BTN_TOUCH=0 symptom.
To correct this, we restore a version of the `WACOM_PAD_FIELD` check
in `wacom_wac_collection()` and return early. This effectively prevents
pad / battery collections from being reported until the very end of the
report as originally intended.
In commit 5ba127878722, we shuffled with the check of 'perm'. But my
brain somehow inverted the condition in 'do_unimap_ioctl' (I thought
it is ||, not &&), so GIO_UNIMAP stopped working completely.
Move the 'perm' checks back to do_unimap_ioctl and do them right again.
In fact, this reverts this part of code to the pre-5ba127878722 state.
Except 'perm' is now a bool.
Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
for (a = 0; a < 2; a++) {
struct kbsentry kbs = {};
strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
ioctl(fd, KDSKBSENT, &kbs);
}
When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888
So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.
It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.
Note that the program above needs at least CAP_SYS_TTY_CONFIG.
This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.
Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.
The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.
The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.
If i915.ko is being used as a passthrough device, it does not know if
the host is using intel_iommu. Mixing the iommu and gfx causes a few
issues (such as scanout overfetch) which we need to workaround inside
the driver, so if we detect we are running under a hypervisor, also
assume the device access is being virtualised.
Reported-by: Stefan Fritsch <sf@sfritsch.de> Suggested-by: Stefan Fritsch <sf@sfritsch.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Stefan Fritsch <sf@sfritsch.de> Cc: stable@vger.kernel.org Tested-by: Stefan Fritsch <sf@sfritsch.de> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019101523.4145-1-chris@chris-wilson.co.uk
(cherry picked from commit f566fdcd6cc49a9d5b5d782f56e3e7cb243f01b8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Contrary to the comment above the id table, we didn't implement a match
function. This meant that every single Apple device that was already
plugged in to the computer would have its device driver reprobed
when the apple-mfi-fastcharge driver was loaded, eg. the SD card reader
could be reprobed when the apple-mfi-fastcharge after pivoting root
during boot up and the module became available.
Make sure that the driver probe isn't being run for unsupported
devices by adding a match function that checks the product ID, in
addition to the id_table checking the vendor ID.
When a USB device driver has both an id_table and a match() function, make
sure to check both to find a match, first matching the id_table, then
checking the match() function.
This makes it possible to have module autoloading done through the
id_table when devices are plugged in, before checking for further
device eligibility in the match() function.
fsl_usb2_device_register() should stop init if dma_set_mask() return
error.
Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current tcpm_detach() only reset hard_reset_count if port->attached
is true, this may cause this counter clear is missed if the CC
disconnect event is generated after tcpm_port_reset() is done
by other events, e.g. VBUS off comes first before CC disconect for
a power sink, in that case the first tcpm_detach() will only clear
port->attached flag but leave hard_reset_count there because
tcpm_port_is_disconnected() is still false, then later tcpm_detach()
by CC disconnect will directly return due to port->attached is cleared,
finally this will result tcpm will not try hard reset or error recovery
for later attach.
ChiYuan reported this issue on his platform with below tcpm trace:
After power sink session setup after hard reset 2 times, detach
from the power source and then attach:
[ 4848.046358] VBUS off
[ 4848.046384] state change SNK_READY -> SNK_UNATTACHED
[ 4848.050908] Setting voltage/current limit 0 mV 0 mA
[ 4848.050936] polarity 0
[ 4848.052593] Requesting mux state 0, usb-role 0, orientation 0
[ 4848.053222] Start toggling
[ 4848.086500] state change SNK_UNATTACHED -> TOGGLING
[ 4848.089983] CC1: 0 -> 0, CC2: 3 -> 3 [state TOGGLING, polarity 0, connected]
[ 4848.089993] state change TOGGLING -> SNK_ATTACH_WAIT
[ 4848.090031] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms
[ 4848.141162] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected]
[ 4848.141170] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT
[ 4848.141184] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @20 ms
[ 4848.163156] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 20 ms]
[ 4848.163162] Start toggling
[ 4848.216918] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[ 4848.216954] state change TOGGLING -> SNK_ATTACH_WAIT
[ 4848.217080] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms
[ 4848.231771] CC1: 0 -> 0, CC2: 3 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected]
[ 4848.231800] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT
[ 4848.231857] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @20 ms
[ 4848.256022] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed20 ms]
[ 4848.256049] Start toggling
[ 4848.871148] VBUS on
[ 4848.885324] CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[ 4848.885372] state change TOGGLING -> SNK_ATTACH_WAIT
[ 4848.885548] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @200 ms
[ 4849.088240] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed200 ms]
[ 4849.088284] state change SNK_DEBOUNCED -> SNK_ATTACHED
[ 4849.088291] polarity 1
[ 4849.088769] Requesting mux state 1, usb-role 2, orientation 2
[ 4849.088895] state change SNK_ATTACHED -> SNK_STARTUP
[ 4849.088907] state change SNK_STARTUP -> SNK_DISCOVERY
[ 4849.088915] Setting voltage/current limit 5000 mV 0 mA
[ 4849.088927] vbus=0 charge:=1
[ 4849.090505] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES
[ 4849.090828] pending state change SNK_WAIT_CAPABILITIES -> SNK_READY @240 ms
[ 4849.335878] state change SNK_WAIT_CAPABILITIES -> SNK_READY [delayed240 ms]
this patch fix this issue by clear hard_reset_count at any cases
of cc disconnect, í.e. don't check port->attached flag.
Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Cc: stable@vger.kernel.org Reported-and-tested-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1602500592-3817-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
is incorrect in case of a delayed work and causes warnings, usually from
the workqueue:
> WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528.
When this happens, USB eventually stops working completely after a while.
Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism
previously introduced cannot be triggered and acm_submit_read_urb() is
never called.
This changes makes the cdc-acm driver use a single delayed work, fixing the
pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the
cooldown mechanism appear to be needed.
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts
register. The issue occurred because EP_CFG register was set twice
before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING
causes that controller increases internal counter holding the number
of reserved on-chip buffers. First time this register was updated in
function cdns3_ep_config before delegating SET_CONFIGURATION request
to class driver and again it was updated when class wanted to enable
endpoint. This patch fixes this issue by configuring endpoints
enabled by class driver in cdns3_gadget_ep_enable and others just
before status stage.
According the programming guide (for all DWC3 IPs), when the driver
handles ClearFeature(halt) request, it should issue CLEAR_STALL command
_after_ the END_TRANSFER command completes. The END_TRANSFER command may
take some time to complete. So, delay the ClearFeature(halt) request
control status stage and wait for END_TRANSFER command completion
interrupt. Only after END_TRANSFER command completes that the driver
may issue CLEAR_STALL command.
The function driver may queue new requests right after halting the
endpoint (i.e. queue new requests while the endpoint is stalled).
There's no restriction preventing it from doing so. However, dwc3
currently drops those requests after CLEAR_STALL. The driver should only
drop started requests. Keep the pending requests in the pending list to
resume and process them after the host issues ClearFeature(Halt) to the
endpoint.
No need to trigger runtime pm in driver removal, otherwise if user
disable auto suspend via sys file, runtime suspend may be entered,
which will call dwc3_core_exit() again and there will be clock disable
not balance warning:
An SG request may be partially completed (due to no available TRBs).
Don't reclaim extra TRBs and clear the needs_extra_trb flag until the
request is fully completed. Otherwise, the driver will reclaim the wrong
TRB.
When preparing for SG, not all the entries are prepared at once. When
resume, don't use the remaining request length to calculate for MPS
alignment. Use the entire request->length to do that.
Cc: stable@vger.kernel.org Fixes: 5d187c0454ef ("usb: dwc3: gadget: Don't setup more than requested") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current ZLP handling for ep0 requests is only for control IN
requests. For OUT direction, DWC3 needs to check and setup for MPS
alignment.
Usually, control OUT requests can indicate its transfer size via the
wLength field of the control message. So usb_request->zero is usually
not needed for OUT direction. To handle ZLP OUT for control endpoint,
make sure the TRB is MPS size.
Similar to some other IA platforms, Elkhart Lake too depends on the
PMU register write to request transition of Dx power state.
Thus, we add the PCI_DEVICE_ID_INTEL_EHLLP to the list of devices that
shall execute the ACPI _DSM method during D0/D3 sequence.
[heikki.krogerus@linux.intel.com: included Fixes tag]
Fixes: dbb0569de852 ("usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices") Cc: stable@vger.kernel.org Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens because we are still holding the path open when we start
adding the sysfs files for the block groups, which creates a dependency
on fs_reclaim via the tree lock. Fix this by dropping the path before
we start doing anything with sysfs.
Reported-by: David Sterba <dsterba@suse.com> CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:
This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.
After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:
while (atomic_read(&rc->elems)) {
if (!atomic_read(&fs_info->reada_works_cnt))
reada_start_machine(fs_info);
wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
(HZ + 9) / 10);
}
(...)
So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:
def dump_re(re):
nzones = re.nzones.value_()
print(f're at {hex(re.value_())}')
print(f'\t logical {re.logical.value_()}')
print(f'\t refcnt {re.refcnt.value_()}')
print(f'\t nzones {nzones}')
for i in range(nzones):
dev = re.zones[i].device
name = dev.name.str.string_()
print(f'\t\t dev id {dev.devid.value_()} name {name}')
print()
for _, e in radix_tree_for_each(fs_info.reada_tree):
re = cast('struct reada_extent *', e)
dump_re(re)
$ drgn dump_reada.py
re at 0xffff8f3da9d25ad8
logical 38928384
refcnt 1
nzones 1
dev id 0 name b'/dev/sdd'
$
So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.
Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:
def bg_flags_string(bg):
flags = bg.flags.value_()
ret = ''
if flags & BTRFS_BLOCK_GROUP_DATA:
ret = 'data'
if flags & BTRFS_BLOCK_GROUP_METADATA:
if len(ret) > 0:
ret += '|'
ret += 'meta'
if flags & BTRFS_BLOCK_GROUP_SYSTEM:
if len(ret) > 0:
ret += '|'
ret += 'system'
if flags & BTRFS_BLOCK_GROUP_RAID0:
ret += ' raid0'
elif flags & BTRFS_BLOCK_GROUP_RAID1:
ret += ' raid1'
elif flags & BTRFS_BLOCK_GROUP_DUP:
ret += ' dup'
elif flags & BTRFS_BLOCK_GROUP_RAID10:
ret += ' raid10'
elif flags & BTRFS_BLOCK_GROUP_RAID5:
ret += ' raid5'
elif flags & BTRFS_BLOCK_GROUP_RAID6:
ret += ' raid6'
elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
ret += ' raid1c3'
elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
ret += ' raid1c4'
else:
ret += ' single'
return ret
def dump_bg(bg):
print()
print(f'block group at {hex(bg.value_())}')
print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')
bg_root = fs_info.block_group_cache_tree.address_of_()
for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
dump_bg(bg)
$ drgn dump_block_groups.py
block group at 0xffff8f3d673b0400
start 22020096 length 16777216
flags 258 - system raid6
block group at 0xffff8f3d53ddb400
start 38797312 length 536870912
flags 260 - meta raid6
block group at 0xffff8f3d5f4d9c00
start 575668224 length 2147483648
flags 257 - data raid6
block group at 0xffff8f3d08189000
start 2723151872 length 67108864
flags 258 - system raid6
block group at 0xffff8f3db70ff000
start 2790260736 length 1073741824
flags 260 - meta raid6
block group at 0xffff8f3d5f4dd800
start 3864002560 length 67108864
flags 258 - system raid6
block group at 0xffff8f3d67037000
start 3931111424 length 2147483648
flags 257 - data raid6
$
So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.
So after figuring that out it became obvious why the hang happens:
1) Task A starts a scrub on any device of the filesystem, except for
device /dev/sdd;
2) Task B starts a device replace with /dev/sdd as the source device;
3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
starting to scrub a stripe from block group X. This call to
btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
calls reada_add_block(), it passes the logical address of the extent
tree's root node as its 'logical' argument - a value of 38928384;
4) Task A then enters reada_find_extent(), called from reada_add_block().
It finds there isn't any existing readahead extent for the logical
address 38928384, so it proceeds to the path of creating a new one.
It calls btrfs_map_block() to find out which stripes exist for the block
group X. On the first iteration of the for loop that iterates over the
stripes, it finds the stripe for device /dev/sdd, so it creates one
zone for that device and adds it to the readahead extent. Before getting
into the second iteration of the loop, the cleanup kthread deletes block
group X because it was empty. So in the iterations for the remaining
stripes it does not add more zones to the readahead extent, because the
calls to reada_find_zone() returned NULL because they couldn't find
block group X anymore.
As a result the new readahead extent has a single zone, corresponding to
the device /dev/sdd;
4) Before task A returns to btrfs_reada_add() and queues the readahead job
for the readahead work queue, task B finishes the device replace and at
btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
device /dev/sdg;
5) Task A returns to reada_add_block(), which increments the counter
"->elems" of the reada_control structure allocated at btrfs_reada_add().
Then it returns back to btrfs_reada_add() and calls
reada_start_machine(). This queues a job in the readahead work queue to
run the function reada_start_machine_worker(), which calls
__reada_start_machine().
At __reada_start_machine() we take the device list mutex and for each
device found in the current device list, we call
reada_start_machine_dev() to start the readahead work. However at this
point the device /dev/sdd was already freed and is not in the device
list anymore.
This means the corresponding readahead for the extent at 38928384 is
never started, and therefore the "->elems" counter of the reada_control
structure allocated at btrfs_reada_add() never goes down to 0, causing
the call to btrfs_reada_wait(), done by the scrub task, to wait forever.
Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.
This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.
For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:
1) Before the readahead worker starts, the device /dev/sdd is removed,
and the corresponding btrfs_device structure is freed. However the
readahead extent still has the zone pointing to the device structure;
2) When the readahead worker starts, it only finds device /dev/sde in the
current device list of the filesystem;
3) It starts the readahead work, at reada_start_machine_dev(), using the
device /dev/sde;
4) Then when it finishes reading the extent from device /dev/sde, it calls
__readahead_hook() which ends up dropping the last reference on the
readahead extent through the last call to reada_extent_put();
5) At reada_extent_put() it iterates over each zone of the readahead extent
and attempts to delete an element from the device's 'reada_extents'
radix tree, resulting in a use-after-free, as the device pointer of the
zone for /dev/sdd is now stale. We can also access the device after
dropping the last reference of a zone, through reada_zone_release(),
also called by reada_extent_put().
And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.
While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.
So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.
This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to find suitable zones for a new readahead extent, we end up
leaving a stale pointer in the global readahead extents radix tree
(fs_info->reada_tree), which can trigger the following trace later on:
1) At reada_find_extent() we don't find any existing readahead extent for
the metadata extent starting at logical address X;
2) So we proceed to create a new one. We then call btrfs_map_block() to get
information about which stripes contain extent X;
3) After that we iterate over the stripes and create only one zone for the
readahead extent - only one because reada_find_zone() returned NULL for
all iterations except for one, either because a memory allocation failed
or it couldn't find the block group of the extent (it may have just been
deleted);
4) We then add the new readahead extent to the readahead extents radix
tree at fs_info->reada_tree;
5) Then we iterate over each zone of the new readahead extent, and find
that the device used for that zone no longer exists, because it was
removed or it was the source device of a device replace operation.
Since this left 'have_zone' set to 0, after finishing the loop we jump
to the 'error' label, call kfree() on the new readahead extent and
return without removing it from the radix tree at fs_info->reada_tree;
6) Any future call to reada_find_extent() for the logical address X will
find the stale pointer in the readahead extents radix tree, increment
its reference counter, which can trigger the use-after-free right
away or return it to the caller reada_add_block() that results in the
use-after-free of the example trace above.
So fix this by making sure we delete the readahead extent from the radix
tree if we fail to setup zones for it (when 'have_zone = 0').
Fixes: 319450211842ba ("btrfs: reada: bypass adding extent when all zone failed") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many things can happen after the device is scanned and before the device
is mounted. One such thing is losing the BTRFS_MAGIC on the device.
If it happens we still won't free that device from the memory and cause
the userland confusion.
For example: As the BTRFS_IOC_DEV_INFO still carries the device path
which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists
device which does not belong to the filesystem anymore:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb
$ wipefs -a /dev/sdb
# /dev/sdb does not contain magic signature
$ mount -o degraded /dev/sda /btrfs
$ btrfs fi show -m
Label: none uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd
Total devices 2 FS bytes used 128.00KiB
devid 1 size 3.00GiB used 571.19MiB path /dev/sda
devid 2 size 3.00GiB used 571.19MiB path /dev/sdb
We need to distinguish the missing signature and invalid superblock, so
add a specific error code ENODATA for that. This also fixes failure of
fstest btrfs/198.
CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead
to a system lockup. It gets stuck trying to write back inodes, and the
write back thread was trying to lock an extent buffer:
The problem here is that as soon as we allocate the new block it is
locked and marked dirty in the btree inode. This means that we could
attempt to writeback this block and need to lock the extent buffer.
However we're not unlocking it here and thus we deadlock.
Fix this by unlocking the cow block if we have any errors inside of
__btrfs_cow_block, and also free it so we do not leak it.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of these lockup reports have the call chain btrfs_clone_files() ->
btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with
both source and destination extents locked and loops over the source
extent to create the clones.
Conditionally reschedule in the btrfs_clone() loop, to give some time back
to other processes.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check")
introduced btrfs root item size check, however btrfs root item has two
versions, the legacy one which just ends before generation_v2 member, is
smaller than current btrfs root item size.
This caused btrfs kernel to reject valid but old tree root leaves.
Fix this problem by also allowing legacy root item, since kernel can
already handle them pretty well and upgrade to newer root item format
when needed.
Reported-by: Martin Steigerwald <martin@lichtvoll.de> Fixes: 259ee7754b67 ("btrfs: tree-checker: Add ROOT_ITEM check") CC: stable@vger.kernel.org # 5.4+ Tested-By: Martin Steigerwald <martin@lichtvoll.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
btrfs_ioctl_send() used open-coded kvzalloc implementation earlier.
The code was accidentally replaced with kzalloc() call [1]. Restore
the original code by using kvzalloc() to allocate sctx->clone_roots.
projects / users / dwmw2 / linux.git / log