Marc Zyngier [Thu, 18 Feb 2010 20:30:31 +0000 (20:30 +0000)]
[ARM] pxa/zeus: Add Eurotech as the manufacturer
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marc Zyngier [Thu, 18 Feb 2010 20:29:24 +0000 (20:29 +0000)]
[ARM] pxa/zeus: Correct the USB host initialisation flags
Signed-off-by: Amit Walambe <amit.walambe@eurotech.com> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marc Zyngier [Fri, 19 Feb 2010 06:07:37 +0000 (14:07 +0800)]
[ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
Zeus console port is wired to a 8250-compatible device (pxa UARTs are
reserved to other uses). This patch allows such a configuration in the
uncompress sequence.
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Fri, 19 Feb 2010 05:49:39 +0000 (13:49 +0800)]
[ARM] pxa: refactor uncompress.h for non-PXA uarts
The original patch came from Marc Zyngier where support of 8250-compatible
UART is required to show the uncompress information. Modified a little bit
here, including changes below:
1. #include <mach/regs-uart.h> is actually not necessary
2. introduced uart_{read,write}() for different base and shift
3. introduced uart_is_enabled() and assumed enabled always for
non-PXA uarts
Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org>
Haojian Zhuang [Wed, 3 Feb 2010 15:01:18 +0000 (10:01 -0500)]
[ARM] mmp2: add handling on PMIC IRQ
Since PMIC INT pin is a special pin of CPU, the status of PMIC INT pin needs
to be cleared after PMIC IRQ occured. Now append the clear operation in
irq chip handler.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Fri, 4 Dec 2009 14:41:28 +0000 (09:41 -0500)]
[ARM] mmp: add support for Marvell MMP2
Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's
ARMv6 compatible. Support basic interrupt handler and timer,
and basic support for MMP2 based FLINT platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Stefan Schmidt [Tue, 16 Feb 2010 21:42:55 +0000 (22:42 +0100)]
[ARM] pxa: define zeus_power_off() only when CONFIG_PM enabled
Add some safety check for CONFIG_PM around zeus_power_off(). Without
it linking can fail like this:
arch/arm/mach-pxa/built-in.o: In function `zeus_power_off':
e800.c:(.text+0x2bc8): undefined reference to `pxa27x_cpu_suspend'
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Stefan Schmidt [Tue, 16 Feb 2010 21:41:52 +0000 (22:41 +0100)]
[ARM] pxa: enable check_scoop_reg() only if CONFIG_PM is set.
This function gets only called from scoop_suspend() and scoop_resume() which are
only built in if we have CONFIG_PM set. Make it the same for check_scoop_reg().
This fixes the following warning:
arch/arm/common/scoop.c:143: warning: ‘check_scoop_reg’ defined but not used
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Sat, 26 Dec 2009 04:32:38 +0000 (12:32 +0800)]
[ARM] sa1111: avoid using hardcoded IRQ numbers for PCMCIA driver
The IRQs for card detect and status change are currently hardcoded in
SA1111 PCMCIA driver, which can be actually obtained from the .irq[]
from 'struct sa1111_dev' to keep it generic.
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to
be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced
locomokbd_{open,close} for masking/unmasking of the keyboard IRQ.
Eric Miao [Mon, 4 Jan 2010 09:14:21 +0000 (17:14 +0800)]
[ARM] pxa: remove now unnecessary pxa_gpio_mode() calls in ac97
Now most (if not all) PXA platforms have been switched to the new MFP
API, it's rather safe to remove these unnecessary pxa_gpio_mode() calls
in pxa2xx-ac97-lib.c now.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Mon, 4 Jan 2010 09:00:13 +0000 (17:00 +0800)]
[ARM] pxa: add the missing AC97 pin configurations
Missing AC97 pin configurations are added where pxa_set_ac97_info() are
called for all pxa25x/pxa27x platforms. Where no exact configuration is
provided, use the default as in sound/arm/pxa2xx-ac97-lib.c
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Mon, 4 Jan 2010 08:30:58 +0000 (16:30 +0800)]
[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Mon, 4 Jan 2010 08:26:32 +0000 (16:26 +0800)]
[ARM] pxa: remove the unnecessary restoring of MFP registers
MFP registers are saved and restored by the mfp sys_device before all
other platform devices, and it is unnecessary here.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Kukjin Kim [Wed, 24 Feb 2010 07:40:44 +0000 (16:40 +0900)]
ARM: S5PV210: Update Kconfig and Makefiles
Updates arch/arm Kconfig and Makefile for building the S5PV210 support.
Also modifies the plat-s5p Kconfig file to include the support for plat-s5p
for S5PV210.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kukjin Kim [Wed, 24 Feb 2010 07:40:40 +0000 (16:40 +0900)]
ARM: S5PV210: Add IRQ support
This patch adds IRQ support for S5PV210. This patch adds interrupt
register definitions, IRQ definitions for various interrupt sources
and new VIC base for VIC2 and VIC3 in plat-s5p common irq code.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kukjin Kim [Wed, 24 Feb 2010 07:40:36 +0000 (16:40 +0900)]
ARM: S5PV210: Add clock support for S5PV210
This patch adds clock support for S5PV210. This patch adds the clock
register definitions and the various system clocks in S5PV210.
Clocks that are common to other S5P SoC'c are added in the common
S5P clock support.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Tue, 23 Feb 2010 11:05:11 +0000 (11:05 +0000)]
mx31ads: Configure SSI5 pins in IOMUX for PMIC module audio support
SSI5 on the CPU is connected to the PMIC module to provide audio support
so unconditionally configure the relevant pins on the CPU to route out
the signals.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Uwe Kleine-König [Mon, 15 Feb 2010 20:52:34 +0000 (21:52 +0100)]
arm/imx/iomux-v1: rename header file
Addionally make iomux-mx*.h headers stand-alone and similar to iomux-v3
platform files should include their platform iomux header from now on.
For now iomux.h simply includes all iomux-v1 platform headers and so
provides compatibility until all files are converted.
Uwe Kleine-König [Mon, 15 Feb 2010 19:50:57 +0000 (20:50 +0100)]
arm/imx/iomux-mx25: unify style and comment cleanup
- use __MACH_IOMUX_MX25_H__ as header protector analogous to
<mach/mx...h>
- remove doxygen comments
- remove #error about mach/iomux.h which is unused on mx25
- remove #ifndef __ASSEMBLY__ which is unneeded here
Uwe Kleine-König [Mon, 8 Feb 2010 20:07:16 +0000 (21:07 +0100)]
arm/imx/gpio: remove a BUG_ON in hot path
Now if the problem occurs that triggered the BUG_ON before, the machine
runs in a NULL pointer dereference. So it wouldn't be much harder now
to debug the situation if it occured.
Uwe Kleine-König [Fri, 5 Feb 2010 21:14:37 +0000 (22:14 +0100)]
arm/imx/gpio: GPIO_INT_{HIGH,LOW}_LEV are not necessarily constant
GPIO_INT_LOW_LEV is defined as
(cpu_is_mx1_mx2() ? 0x3 : 0x0)
so depending on compiler optimisation and enabled SoCs this doesn't
qualify as a constant expression as needed by a switch statement.
Ditto for GPIO_INT_HIGH_LEV.
Uwe Kleine-König [Fri, 5 Feb 2010 16:40:28 +0000 (17:40 +0100)]
arm/mx2: define seperate gpio port descriptions for imx21 and imx27
As the gpio ports have different addresses on imx21 and imx27 there are
two different port descriptions needed if not relying on the overloaded
cpp macro IO_ADDRESS. So some cpp magic is added to minimize code
duplication.
Uwe Kleine-König [Thu, 11 Feb 2010 15:31:49 +0000 (16:31 +0100)]
arm/mx2: use per-SOC nand device
The previous commit introduced one nand device per SoC. Use this
directly instead of the compatibility macro that will break for
multi-SoC kernels. And while at it remove the compatibility macro now
that all in-tree users are fixed.
Jassi Brar [Wed, 17 Feb 2010 19:03:19 +0000 (19:03 +0000)]
ARM: S3C64XX: Declare IISv4 PCLK for S3C6410
[Updated the device ID to -1 since there's only one IISv4 device but the
S3C clock API tries to match based on the ID of the requesting device
(and not the name) -- broonie.]
Signed-Off-by: Jassi Brar <jassi.brar@samsung.com>
[ben-linux@fluff.org: Fixed Jassi's lastname] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jassi Brar [Fri, 12 Feb 2010 10:38:51 +0000 (10:38 +0000)]
ARM: S3C64XX: Add AC97 platform resources
This patch defines the platform device and the resources: IRQ, DMA and MEM,
needed by the AC97 controller driver.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mark Brown [Wed, 17 Feb 2010 18:19:29 +0000 (18:19 +0000)]
ARM: SMDK6410: Add initial support for WM1192-EV1 PMIC board
The Wolfson Microelectronics 1192-EV1 is a plug in module for the
SMDK6410 providing power using a WM8312 PMIC. This patch provides
initial hookup sufficient to initialise the board, though not all
features are fully described yet.
As part of this supplies for the system that are provided as a
single supply by one of the currently merged PMIC boards are
factored out so they can be reused between different regulators.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
projects / users / jedix / linux-maple.git / log