Rafael J. Wysocki [Mon, 24 Mar 2025 14:06:06 +0000 (15:06 +0100)]
Merge branches 'pm-em' and 'pm-runtime'
Merge Energy Model handling code updates and updates of the runtime PM
core code for 6.15-rc1:
- Clean up the Energy Model handling code somewhat (Rafael Wysocki).
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing).
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba).
- Address RCU-related sparse warnings in the Energy Model code (Rafael
Wysocki).
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao).
- Unify error handling during runtime suspend and runtime resume in the
core to help drivers to implement more consistent runtime PM error
handling (Rafael Wysocki).
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki).
* pm-em:
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
PM: EM: Consify two parameters of em_dev_register_perf_domain()
MAINTAINERS: Add Energy Model framework as properly maintained
PM: EM: use kfree_rcu() to simplify the code
PM: EM: Slightly reduce em_check_capacity_update() overhead
PM: EM: Drop unused parameter from em_adjust_new_capacity()
* pm-runtime:
PM: runtime: Unify error handling during suspend and resume
PM: runtime: Drop status check from pm_runtime_force_resume()
PM: Rearrange documentation related to __pm_runtime_disable()
Rafael J. Wysocki [Mon, 24 Mar 2025 13:43:30 +0000 (14:43 +0100)]
Merge branch 'pm-cpuidle'
Merge cpuidle updates for 6.15-rc5, including a menu governor update
that is reported to improve some benchmark results quite significantly:
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki).
- Make it possible to tell the intel_idle driver to ignore its built-in
table of idle states for the given processor, clean up the handling
of auto-demotion disabling on Baytrail and Cherrytrail chips in it,
and update its MAINTAINERS entry (David Arcari, Artem Bityutskiy,
Rafael Wysocki).
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai).
* pm-cpuidle:
cpuidle: Init cpuidle only for present CPUs
cpuidle: intel_idle: Update MAINTAINERS
intel_idle: introduce 'no_native' module parameter
cpuidle: menu: Update documentation after get_typical_interval() changes
cpuidle: menu: Avoid discarding useful information
cpuidle: menu: Eliminate outliers on both ends of the sample set
cpuidle: menu: Tweak threshold use in get_typical_interval()
cpuidle: menu: Use one loop for average and variance computations
cpuidle: menu: Drop a redundant local variable
intel_idle: clean up BYT/CHT auto demotion disable
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng).
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar).
- Make it possible to avoid enabling capacity-aware scheduling (CAS) in
the intel_pstate driver and relocate a check for out-of-band (OOB)
platform handling in it to make it detect OOB before checking HWP
availability (Rafael Wysocki).
- Fix dbs_update() to avoid inadvertent conversions of negative integer
values to unsigned int which causes CPU frequency selection to be
inaccurate in some cases when the "conservative" cpufreq governor is
in use (Jie Zhan).
* pm-cpufreq: (91 commits)
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
cpufreq: tegra186: Share policy per cluster
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
...
Krzysztof Kozlowski [Thu, 13 Mar 2025 09:08:22 +0000 (10:08 +0100)]
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
Add SDX75 and SA8775p compatibles to respective if:then: blocks to
narrow their properties and add a new section for SM8650 with four 'reg'
and 'interrupts' (top-level already allows four).
SA8755p DTS comes without interrupts, but only because they might not
be available for OS under given firmware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Krzysztof Kozlowski [Thu, 13 Mar 2025 09:08:20 +0000 (10:08 +0100)]
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
When narrowing properties per variant, the 'interrupt-names' should have
the same constraints as 'interrupts'. Add missing upper bound on the
property.
Fixes: e69003202434 ("dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290") Fixes: 7ae24e054f75 ("dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Jacky Bai [Thu, 13 Mar 2025 01:39:28 +0000 (09:39 +0800)]
cpufreq: Init cpufreq only for present CPUs
for_each_possible_cpu() is currently used to initialize cpufreq.
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the cpufreq probe failure or defer probe due to no cpu device
available for not present CPUs.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpufreq drivers to ensure it only registers cpufreq for
CPUs that are actually present.
Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Jacky Bai [Fri, 7 Mar 2025 14:55:47 +0000 (22:55 +0800)]
cpuidle: Init cpuidle only for present CPUs
for_each_possible_cpu() is currently used to initialize cpuidle
in below cpuidle drivers:
drivers/cpuidle/cpuidle-arm.c
drivers/cpuidle/cpuidle-big_little.c
drivers/cpuidle/cpuidle-psci.c
drivers/cpuidle/cpuidle-qcom-spm.c
drivers/cpuidle/cpuidle-riscv-sbi.c
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the failure:
| Failed to register cpuidle device for cpu1
Then rollback to cancel all CPUs' cpuidle registration.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpuidle drivers to ensure it only registers cpuidle devices
for CPUs that are actually present.
Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES") Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Yuanjie Yang <quic_yuanjiey@quicinc.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/20250307145547.2784821-1-ping.bai@nxp.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 12 Mar 2025 19:15:22 +0000 (20:15 +0100)]
Merge tag 'linux-cpupower-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility updates for 6.15-rc1 from Shuah Khan:
"Fixes lib version-ing, memory leaks in error legs, removes hard-coded
values, and implements CPU physical core querying."
* tag 'linux-cpupower-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Make lib versioning scheme more obvious and fix version link
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
cpupower: monitor: Exit with error status if execvp() fail
pm: cpupower: bench: Prevent NULL dereference on malloc failure
Linus Torvalds [Sun, 9 Mar 2025 19:23:14 +0000 (09:23 -1000)]
Merge tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Linus Torvalds [Sun, 9 Mar 2025 19:14:07 +0000 (09:14 -1000)]
Merge tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Linus Torvalds [Sun, 9 Mar 2025 19:11:42 +0000 (09:11 -1000)]
Merge tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Linus Torvalds [Sun, 9 Mar 2025 19:07:54 +0000 (09:07 -1000)]
Merge tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Linus Torvalds [Sun, 9 Mar 2025 19:04:08 +0000 (09:04 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
Paolo Bonzini [Sun, 9 Mar 2025 07:44:06 +0000 (03:44 -0400)]
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
Paolo Bonzini [Sun, 9 Mar 2025 07:43:56 +0000 (03:43 -0400)]
Merge tag 'kvmarm-fixes-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
Linus Torvalds [Sun, 9 Mar 2025 00:34:06 +0000 (14:34 -1000)]
Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
Linus Torvalds [Sat, 8 Mar 2025 19:29:54 +0000 (09:29 -1000)]
Merge tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Linus Torvalds [Sat, 8 Mar 2025 17:21:41 +0000 (07:21 -1000)]
Merge tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
Bibo Mao [Sat, 8 Mar 2025 05:52:04 +0000 (13:52 +0800)]
LoongArch: KVM: Fix GPA size issue about VM
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Sat, 8 Mar 2025 05:52:01 +0000 (13:52 +0800)]
LoongArch: KVM: Reload guest CSR registers after sleep
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Sat, 8 Mar 2025 05:51:59 +0000 (13:51 +0800)]
LoongArch: KVM: Add interrupt checking for AVEC
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The problem is that base address allocated from hugetlbfs is not aligned
with pmd size. Here add a checking for hugetlbfs and align base address
with pmd size. After this patch the test case "testcases/bin/hugefork02"
passes to run.
This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach
generic_get_unmapped_area{_topdown} to handle hugetlb mappings").
Bibo Mao [Sat, 8 Mar 2025 05:51:32 +0000 (13:51 +0800)]
LoongArch: Set max_pfn with the PFN of the last page
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+ Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Sat, 8 Mar 2025 05:51:32 +0000 (13:51 +0800)]
LoongArch: Use polling play_dead() when resuming from hibernation
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Tiezhu Yang [Sat, 8 Mar 2025 05:50:45 +0000 (13:50 +0800)]
LoongArch: Convert unreachable() to BUG()
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Linus Torvalds [Sat, 8 Mar 2025 02:21:02 +0000 (16:21 -1000)]
Merge tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
Ingo Molnar [Thu, 6 Mar 2025 22:00:16 +0000 (23:00 +0100)]
x86/mm: Define PTRS_PER_PMD for assembly code too
Andy reported the following build warning from head_32.S:
In file included from arch/x86/kernel/head_32.S:29:
arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
59 | #if PTRS_PER_PMD > 1
The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.
Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
Linus Torvalds [Fri, 7 Mar 2025 22:17:42 +0000 (12:17 -1000)]
Merge tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
Linus Torvalds [Fri, 7 Mar 2025 21:17:30 +0000 (11:17 -1000)]
Merge tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
Linus Torvalds [Fri, 7 Mar 2025 21:12:33 +0000 (11:12 -1000)]
Merge tag 'block-6.14-20250306' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
Linus Torvalds [Fri, 7 Mar 2025 21:09:33 +0000 (11:09 -1000)]
Merge tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
- Fix possible memory corruption in child_cfs_rq_on_list()
* tag 'sched-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Update limit of sched_rt sysctl in documentation
sched/deadline: Use online cpus for validating runtime
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
Linus Torvalds [Fri, 7 Mar 2025 20:38:33 +0000 (10:38 -1000)]
Merge tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Fix a race between PMU registration and event creation, and fix
pmus_lock vs. pmus_srcu lock ordering"
* tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_pmu_register() vs. perf_init_event()
perf/core: Fix pmus_lock vs. pmus_srcu ordering
Linus Torvalds [Fri, 7 Mar 2025 17:51:27 +0000 (07:51 -1000)]
Merge tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- xgene-hwmon: Fix a NULL vs IS_ERR_OR_NULL() check
- ad7314: Return error if leading zero bits are non-zero
- ntc_thermistor: Update/fix the ncpXXxh103 sensor table
- pmbus: Initialise page count in pmbus_identify()
- peci/dimmtemp: Do not provide fake threshold data
* tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
hwmon: (ad7314) Validate leading zero bits and return error
hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table
hwmon: (pmbus) Initialise page count in pmbus_identify()
hwmon: (peci/dimmtemp) Do not provide fake thresholds data
Linus Torvalds [Fri, 7 Mar 2025 17:29:13 +0000 (07:29 -1000)]
Merge tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
Linus Torvalds [Fri, 7 Mar 2025 17:24:41 +0000 (07:24 -1000)]
Merge tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes.
Many of them are boring device-specific quirks, and should be safe to
take"
* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
ALSA: hda/realtek: update ALC222 depop optimize
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
ALSA: usx2y: validate nrpacks module parameter on probe
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
ALSA: seq: Avoid module auto-load handling at event delivery
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
ALSA: hda/realtek: Fix Asus Z13 2025 audio
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
Jeson Gao [Fri, 7 Mar 2025 13:23:49 +0000 (13:23 +0000)]
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
Now not only CPUs can use energy efficiency models, but GPUs
can also use. On the other hand, even with only one CPU, we can also
use energy_model to align control in thermal.
So remove the dependence of SMP, and add the DEVFREQ.
Signed-off-by: Jeson Gao <jeson.gao@unisoc.com>
[Added missing SMP config option in DTPM_CPU dependency] Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20250307132649.4056210-1-lukasz.luba@arm.com
[ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is because the __rcu annotation for sparse is only applicable to
pointers that need rcu_dereference() or equivalent for protection, which
basically means pointers assigned with rcu_assign_pointer().
Make all of the above sparse warnings go away by cleaning up the usage
of __rcu and using rcu_dereference_protected() where applicable.
Alexey Kardashevskiy [Fri, 7 Mar 2025 01:37:00 +0000 (12:37 +1100)]
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
Nikunj A Dadhania [Thu, 6 Mar 2025 08:17:21 +0000 (19:17 +1100)]
virt: sev-guest: Allocate request data dynamically
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") Closes: https://github.com/AMDESE/AMDSEV/issues/265 Reported-by: andreas.stuehrk@yaxi.tech Signed-off-by: Nikunj A Dadhania <nikunj@amd.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
Linus Torvalds [Fri, 7 Mar 2025 04:25:35 +0000 (18:25 -1000)]
fs/pipe: add simpler helpers for common cases
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
Breno Leitao [Thu, 6 Mar 2025 16:27:51 +0000 (08:27 -0800)]
block: Name the RQF flags enum
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
Linus Torvalds [Thu, 6 Mar 2025 23:52:15 +0000 (13:52 -1000)]
Merge tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
Kent Overstreet [Fri, 28 Feb 2025 16:34:41 +0000 (11:34 -0500)]
bcachefs: copygc now skips non-rw devices
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Ard Biesheuvel [Thu, 6 Mar 2025 15:59:16 +0000 (16:59 +0100)]
x86/boot: Sanitize boot params before parsing command line
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Rafael J. Wysocki [Thu, 6 Mar 2025 20:28:48 +0000 (21:28 +0100)]
Merge tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate updates for 6.15 (3/6/25) from Mario Limonciello:
"A lot of code optimization to avoid cases where call paths will end up
calling the same writes multiple times and needlessly caching variables.
To accomplish this some of the writes are now made into an atomically
written "perf" variable. Locking has been overhauled to ensure it only
applies to the necessary functions. Tracing has been adjusted to ensure
trace events only are used right before writing out to the hardware."
NOTE: This is a redo of amd-pstate-v6.15-2025-03-03 with a fixed Fixes tag.
* tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (29 commits)
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
cpufreq/amd-pstate: Overhaul locking
cpufreq/amd-pstate: Move perf values into a union
cpufreq/amd-pstate: Drop min and max cached frequencies
cpufreq/amd-pstate: Show a warning when a CPU fails to setup
cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend
cpufreq/amd-pstate: Fix the clamping of perf values
...
John B. Wyatt IV [Wed, 5 Mar 2025 21:08:59 +0000 (16:08 -0500)]
cpupower: Implement CPU physical core querying
This patch is also an issue report. get_cpu_topology will always save
into cpupower_topology a cores size of 0. The code to handle this looks
like it was commented out, and what is commented out is missing a curly
bracket.
Inspiration was taken from psutil to implement this by querying
core_cpu_list. Instead of using a hashmap, I used a sorted array, and
counted the number of valid unique strings. The counting of this takes
place before the qsort for .pkg as the following code says it is
dependent on the order of that sort.
The previous code claimed Intel CPUs are not numbered correctly. I was
not able to reproduce that issue and removed that comment and the code.
This commit was tested with the libcpupower SWIG Python bindings and
performed correctly on 4 different setups. The most notable is the
Framework Intel laptop; a hybrid system of 4 P cores (8 threads) and 8 E
cores (8 threads).
The 4 setups: A 4 core virt-manager VM running Fedora 41 4c/4t (specs not
listed) was tested as a sanity test for VMs. A Lenovo Ryzen 7 Pro 7840HS
8c/16t. A Supermico Intel(R) Xeon(R) Gold 6330 CPU w/ 56c/112t with 2 CPU
sockets. A Framework 12th Gen Intel(R) Core(TM) i5-1240P with hybrid
cores.
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 7 PRO 7840HS w/ Radeon 780M Graphics
CPU family: 25
Model: 116
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 1
CPU(s): 112
On-line CPU(s) list: 0-111
Vendor ID: GenuineIntel
BIOS Vendor ID: Intel(R) Corporation
Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz
BIOS Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz CPU @ 2.0GHz
BIOS CPU family: 179
CPU family: 6
Model: 106
Thread(s) per core: 2
Core(s) per socket: 28
Socket(s): 2
Stepping: 6
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: GenuineIntel
Model name: 12th Gen Intel(R) Core(TM) i5-1240P
CPU family: 6
Model: 154
Thread(s) per core: 2
Core(s) per socket: 12
Socket(s): 1
Stepping: 3
Rafael J. Wysocki [Wed, 5 Mar 2025 21:08:21 +0000 (22:08 +0100)]
PM: EM: Consify two parameters of em_dev_register_perf_domain()
Notice that em_dev_register_perf_domain() and the functions called by it
do not update objects pointed to by its cb and cpus parameters, so the
const modifier can be added to them.
This allows the return value of cpumask_of() or a pointer to a
struct em_data_callback declared as const to be passed to
em_dev_register_perf_domain() directly without explicit type
casting which is rather handy.
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
Linus Torvalds [Thu, 6 Mar 2025 19:19:15 +0000 (09:19 -1000)]
Merge tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
Mario Limonciello [Wed, 19 Feb 2025 20:08:14 +0000 (14:08 -0600)]
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
When the CPU goes offline there is no need to change the CPPC request
because the CPU will go into the deepest C-state it supports already.
Actually changing the CPPC request when it goes offline messes up the
cached values and can lead to the wrong values being restored when
it comes back.
Instead drop the actions and if the CPU comes back online let
amd_pstate_epp_set_policy() restore it to expected values.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Mario Limonciello [Mon, 9 Dec 2024 17:57:38 +0000 (11:57 -0600)]
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
The EPP tracing is done by the caller today, but this precludes the
information about whether the CPPC request has changed.
Move it into the update_perf and set_epp functions and include information
about whether the request has changed from the last one.
amd_pstate_update_perf() and amd_pstate_set_epp() now require the policy
as an argument instead of the cpudata.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Mario Limonciello [Sat, 7 Dec 2024 05:20:04 +0000 (23:20 -0600)]
cpufreq/amd-pstate: Overhaul locking
amd_pstate_cpu_boost_update() and refresh_frequency_limits() both
update the policy state and have nothing to do with the amd-pstate
driver itself.
A global "limits" lock doesn't make sense because each CPU can have
policies changed independently. Each time a CPU changes values they
will atomically be written to the per-CPU perf member. Drop per CPU
locking cases.
The remaining "global" driver lock is used to ensure that only one
entity can change driver modes at a given time.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Mario Limonciello [Thu, 23 Jan 2025 22:16:01 +0000 (16:16 -0600)]
cpufreq/amd-pstate: Drop min and max cached frequencies
Use the perf_to_freq helpers to calculate this on the fly.
As the members are no longer cached add an extra check into
amd_pstate_epp_update_limit() to avoid unnecessary calls in
amd_pstate_update_min_max_limit().
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Mario Limonciello [Wed, 11 Dec 2024 20:57:57 +0000 (14:57 -0600)]
cpufreq/amd-pstate: Show a warning when a CPU fails to setup
I came across a system that MSR_AMD_CPPC_CAP1 for some CPUs isn't
populated. This is an unexpected behavior that is most likely a
BIOS bug. In the event it happens I'd like users to report bugs
to properly root cause and get this fixed.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Mario Limonciello [Mon, 17 Feb 2025 19:28:51 +0000 (13:28 -0600)]
cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend
During resume it's possible the firmware didn't restore the CPPC request
MSR but the kernel thinks the values line up. This leads to incorrect
performance after resume from suspend.
To fix the issue invalidate the cached value at suspend. During resume use
the saved values programmed as cached limits.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reported-by: Miroslav Pavleski <miroslav@pavleski.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Dhananjay Ugwekar [Sat, 22 Feb 2025 03:32:22 +0000 (03:32 +0000)]
cpufreq/amd-pstate: Fix the clamping of perf values
The clamping in freq_to_perf() is broken right now, as we first typecast
(read wraparound) the overflowing value into a u8 and then clamp it down.
So, use a u32 to store the >255 value in certain edge cases and then clamp
it down into a u8.
Also, use a "explicit typecast + clamp" instead of just a "clamp_t" as the
latter typecasts first and then clamps between the limits, which defeats
our purpose.
Fixes: 620136ced35a ("cpufreq/amd-pstate: Modularize perf<->freq conversion") Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250222033221.554976-1-dhananjay.ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Linus Torvalds [Thu, 6 Mar 2025 18:18:48 +0000 (08:18 -1000)]
Merge tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
Linus Torvalds [Thu, 6 Mar 2025 18:04:49 +0000 (08:04 -1000)]
Merge tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
Linus Torvalds [Thu, 6 Mar 2025 17:53:25 +0000 (07:53 -1000)]
fs/pipe: fix pipe buffer index use in FUSE
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Linus Torvalds [Thu, 6 Mar 2025 17:33:58 +0000 (07:33 -1000)]
fs/pipe: do not open-code pipe head/tail logic in FIONREAD
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Linus Torvalds [Thu, 6 Mar 2025 17:30:42 +0000 (07:30 -1000)]
fs/pipe: express 'pipe_empty()' in terms of 'pipe_occupancy()'
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Andrei Kuchynski [Wed, 5 Mar 2025 11:17:39 +0000 (11:17 +0000)]
usb: typec: ucsi: Fix NULL pointer access
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org> Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miao Li [Tue, 4 Mar 2025 07:07:57 +0000 (15:07 +0800)]
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
projects / users / jedix / linux-maple.git / log