Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
Merge tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
Merge tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
Merge tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
Merge tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
Merge tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
Merge tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
Hans Holmberg [Wed, 9 Apr 2025 12:39:56 +0000 (12:39 +0000)]
xfs: document zoned rt specifics in admin-guide
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator") Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
Darrick J. Wong [Tue, 15 Apr 2025 00:33:45 +0000 (17:33 -0700)]
xfs: fix fsmap for internal zoned devices
Filesystems with an internal zoned rt section use xfs_rtblock_t values
that are relative to the start of the data device. When fsmap reports
on internal rt sections, it reports the space used by the data section
as "OWN_FS".
Unfortunately, the logic for resuming a query isn't quite right, so
xfs/273 fails because it stress-tests GETFSMAP with a single-record
buffer. If we enter the "report fake space as OWN_FS" block with a
nonzero key[0].fmr_length, we should add that to key[0].fmr_physical
and recheck if we still need to emit the fake record. We should /not/
just return 0 from the whole function because that prevents all rmap
record iteration.
If we don't enter that block, the resumption is still wrong.
keys[*].fmr_physical is a reflection of what we copied out to userspace
on a previous query, which means that it already accounts for rgstart.
It is not correct to add rtstart_daddr when computing start_rtb or
end_rtb, so stop that.
While we're at it, add a xfs_has_zoned to make it clear that this is a
zoned filesystem thing.
Fixes: e50ec7fac81aa2 ("xfs: enable fsmap reporting for internal RT devices") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Zhang Xianwei [Sat, 15 Mar 2025 06:32:16 +0000 (14:32 +0800)]
xfs: Fix spelling mistake "drity" -> "dirty"
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
ata: libata-sata: Save all fields from sense data descriptor
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Signed-off-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Armin Wolf [Mon, 14 Apr 2025 14:04:53 +0000 (16:04 +0200)]
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Merge tag 'edac_urgent_for_v6.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes to the AMD translation library for the MI300 side of things:
- Use the row[13] bit when calculating the memory row to retire
- Mask the physical row address in order to avoid creating duplicate
error records"
* tag 'edac_urgent_for_v6.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/FMPM: Get masked address
RAS/AMD/ATL: Include row[13] bit in row retirement
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Oscar Salvador [Wed, 9 Apr 2025 08:24:52 +0000 (10:24 +0200)]
MAINTAINERS: update HUGETLB reviewers
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de> Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
Merge tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
slab: ensure slab->obj_exts is clear in a newly allocated slab page
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Tested-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Darrick J. Wong [Tue, 8 Apr 2025 00:30:30 +0000 (17:30 -0700)]
xfs: compute buffer address correctly in xmbuf_map_backing_mem
Prior to commit e614a00117bc2d, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117bc2d ("xfs: cleanup mapping tmpfs folios into the buffer cache") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Hans Holmberg [Tue, 25 Mar 2025 09:10:49 +0000 (09:10 +0000)]
xfs: add tunable threshold parameter for triggering zone GC
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Christoph Hellwig [Thu, 20 Mar 2025 07:52:14 +0000 (08:52 +0100)]
xfs: mark xfs_buf_free as might_sleep()
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Christoph Hellwig [Thu, 20 Mar 2025 07:52:13 +0000 (08:52 +0100)]
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec503f3 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c37
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Merge tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
Merge tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()") Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ojaswin Mujoo [Fri, 28 Mar 2025 06:24:52 +0000 (11:54 +0530)]
ext4: make block validity check resistent to sb bh corruption
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tom Vierjahn [Mon, 24 Mar 2025 22:09:30 +0000 (23:09 +0100)]
Documentation: ext4: Add fields to ext4_super_block documentation
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature") Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock") Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
Nam Cao [Fri, 11 Apr 2025 07:37:17 +0000 (09:37 +0200)]
rv: Fix out-of-bound memory access in rv_is_container_monitor()
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Steven Rostedt [Fri, 11 Apr 2025 17:30:15 +0000 (13:30 -0400)]
ftrace: Do not have print_graph_retval() add a newline
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home Reported-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/ Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
Herbert Xu [Fri, 11 Apr 2025 01:26:47 +0000 (09:26 +0800)]
crypto: scomp - Fix wild memory accesses in scomp_free_streams
In order to use scomp_free_streams to free the partially allocted
streams in the allocation error path, move the alg->stream assignment
to the beginning. Also check for error pointers in scomp_free_streams
before freeing the ctx.
Finally set alg->stream to NULL to not break subsequent attempts
to allocate the streams.
Fixes: 3d72ad46a23a ("crypto: acomp - Move stream management into scomp layer") Reported-by: syzkaller <syzkaller@googlegroups.com> Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case of apply_to_existing_page_range(), apply_to_pte_range() is
reached with 'create' set to false. When !create, the loop over the PTE
page table is broken.
apply_to_pte_range() will only move to the next PTE entry if 'create' is
true or if the current entry is not pte_none().
This means that the user of apply_to_existing_page_range() will not have
'fn' called for any entries after the first pte_none() in the PTE page
table.
Fix the loop logic in apply_to_pte_range().
There are no known runtime issues from this, but the fix is trivial enough
for stable@ even without a known buggy user.
Link: https://lkml.kernel.org/r/20250409094043.1629234-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: be1db4753ee6 ("mm/memory.c: add apply_to_existing_page_range() helper") Cc: Daniel Axtens <dja@axtens.net> Cc: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following build warning comes up for cow test as 'transferred' variable has
not been initialized. Fix the warning via zero init for the variable.
CC cow
cow.c: In function `do_test_vmsplice_in_parent':
cow.c:365:61: warning: `transferred' may be used uninitialized [-Wmaybe-uninitialized]
365 | cur = read(fds[0], new + total, transferred - total);
| ~~~~~~~~~~~~^~~~~~~
cow.c:296:29: note: `transferred' was declared here
296 | ssize_t cur, total, transferred;
| ^~~~~~~~~~~
CC compaction_test
CC gup_longterm
T.J. Mercier [Wed, 9 Apr 2025 22:51:11 +0000 (22:51 +0000)]
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
alloc_pages_bulk_node() may partially succeed and allocate fewer than the
requested nr_pages. There are several conditions under which this can
occur, but we have encountered the case where CONFIG_PAGE_OWNER is enabled
causing all bulk allocations to always fallback to single page allocations
due to commit 187ad460b841 ("mm/page_alloc: avoid page allocator recursion
with pagesets.lock held").
Currently vm_module_tags_populate() immediately fails when
alloc_pages_bulk_node() returns fewer than the requested number of pages.
When this happens memory allocation profiling gets disabled, for example
[ 14.297583] [9: modprobe: 465] Failed to allocate memory for allocation tags in the module scsc_wlan. Memory allocation profiling is disabled!
[ 14.299339] [9: modprobe: 465] modprobe: Failed to insmod '/vendor/lib/modules/scsc_wlan.ko' with args '': Out of memory
This patch causes vm_module_tags_populate() to retry bulk allocations for
the remaining memory instead of failing immediately which will avoid the
disablement of memory allocation profiling.
Link: https://lkml.kernel.org/r/20250409225111.3770347-1-tjmercier@google.com Fixes: 0f9b685626da ("alloc_tag: populate memory for module tags as needed") Signed-off-by: T.J. Mercier <tjmercier@google.com> Reported-by: Janghyuck Kim <janghyuck.kim@samsung.com> Acked-by: Suren Baghdasaryan <surenb@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Tue, 8 Apr 2025 08:59:50 +0000 (10:59 +0200)]
mm: (un)track_pfn_copy() fix + doc improvements
We got a late smatch warning and some additional review feedback.
smatch warnings:
mm/memory.c:1428 copy_page_range() error: uninitialized symbol 'pfn'.
We actually use the pfn only when it is properly initialized; however, we
may pass an uninitialized value to a function -- although it will not use
it that likely still is UB in C.
So let's just fix it by always initializing pfn in the caller of
track_pfn_copy(), and improving the documentation of track_pfn_copy().
While at it, clarify the doc of untrack_pfn_copy(), that internal checks
make sure if we actually have to untrack anything.
Link: https://lkml.kernel.org/r/20250408085950.976103-1-david@redhat.com Fixes: dc84bc2aba85 ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202503270941.IFILyNCX-lkp@intel.com/ Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: fix filemap_get_folios_contig returning batches of identical folios
filemap_get_folios_contig() is supposed to return distinct folios found
within [start, end]. Large folios in the Xarray become multi-index
entries. xas_next() can iterate through the sub-indexes before finding a
sibling entry and breaking out of the loop.
This can result in a returned folio_batch containing an indeterminate
number of duplicate folios, which forces the callers to skeptically handle
the returned batch. This is inefficient and incurs a large maintenance
overhead.
We can fix this by calling xas_advance() after we have successfully adding
a folio to the batch to ensure our Xarray is positioned such that it will
correctly find the next folio - similar to filemap_get_read_batch().
Baolin Wang [Mon, 7 Apr 2025 11:31:35 +0000 (19:31 +0800)]
selftests: mincore: fix tmpfs mincore test failure
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expected ra_pages (511) == 0 (0)
mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memory
check_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"
The reason for the test case failure is that my system automatically enabled
tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always'
cmdline. However, the test case still expects the tmpfs mounted on /dev/shm to
allocate small folios, which leads to assertion failures when verifying readahead
pages.
As discussed with David, there's no reason to continue checking the readahead
logic for tmpfs. Drop it to fix this issue.
Link: https://lkml.kernel.org/r/9a00856cc6a8b4e46f4ab8b1af11ce5fc1a31851.1744025467.git.baolin.wang@linux.alibaba.com Fixes: d635ccdb435c ("mm: shmem: add a kernel command line to change the default huge policy for tmpfs") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jinjiang Tu [Mon, 7 Apr 2025 12:47:06 +0000 (20:47 +0800)]
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
In set_max_huge_pages(), min_count is computed taking into account surplus
huge pages, which might lead in some cases to not be able to free huge
pages and end up accounting them as surplus instead.
One way to solve it is to subtract surplus_huge_pages directly, but we
cannot do it blindly because there might be surplus pages that are also
free pages, which might happen when we fail to restore the vmemmap for
optimized hvo pages. So we could be subtracting the same page twice.
In order to work this around, let us first compute the number of free
persistent pages, and use that along with surplus pages to compute
min_count.
Steps to reproduce:
1) create 5 hugetlb folios in Node0
2) run a program to use all the hugetlb folios
3) echo 0 > nr_hugepages for Node0 to free the hugetlb folios. Thus
the 5 hugetlb folios in Node0 are accounted as surplus.
4) create 5 hugetlb folios in Node1
5) echo 0 > nr_hugepages for Node1 to free the hugetlb folios
The result:
Node0 Node1
Total 5 5
Free 0 5
Surp 5 5
The result with this patch:
Node0 Node1
Total 5 0
Free 0 0
Surp 5 0
Frank van der Linden [Mon, 7 Apr 2025 16:54:35 +0000 (16:54 +0000)]
mm/cma: report base address of single range correctly
The cma_declare_contiguous_nid code was refactored by commit c009da4258f9
("mm, cma: support multiple contiguous ranges, if requested"), so that it
could use an internal function to attempt a single range area first, and
then try a multi-range one.
However, that meant that the actual base address used for the !fixed case
(base == 0) wasn't available one level up to be printed in the
informational message, and it would always end up printing a base address
of 0 in the boot message.
Make the internal function take a phys_addr_t pointer to the base address,
so that the value is available to the caller.
[fvdl@google.com: v2] Link: https://lkml.kernel.org/r/20250408164000.3215690-1-fvdl@google.com Link: https://lkml.kernel.org/r/20250407165435.2567898-1-fvdl@google.com Fixes: c009da4258f9 ("mm, cma: support multiple contiguous ranges, if requested") Signed-off-by: Frank van der Linden <fvdl@google.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/linux-mm/CAMuHMdVWviQ7O9yBFE3f=ev0eVb1CnsQvR6SKtEROBbM6z7g3w@mail.gmail.com/ Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Mon, 7 Apr 2025 18:01:53 +0000 (14:01 -0400)]
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
The test robot identified c2f6ea38fc1b ("mm: page_alloc: don't steal
single pages from biggest buddy") as the root cause of a 56.4% regression
in vm-scalability::lru-file-mmap-read.
Carlos reports an earlier patch, c0cd6f557b90 ("mm: page_alloc: fix
freelist movement during block conversion"), as the root cause for a
regression in worst-case zone->lock+irqoff hold times.
Both of these patches modify the page allocator's fallback path to be less
greedy in an effort to stave off fragmentation. The flip side of this is
that fallbacks are also less productive each time around, which means the
fallback search can run much more frequently.
Carlos' traces point to rmqueue_bulk() specifically, which tries to refill
the percpu cache by allocating a large batch of pages in a loop. It
highlights how once the native freelists are exhausted, the fallback code
first scans orders top-down for whole blocks to claim, then falls back to
a bottom-up search for the smallest buddy to steal. For the next batch
page, it goes through the same thing again.
This can be made more efficient. Since rmqueue_bulk() holds the
zone->lock over the entire batch, the freelists are not subject to outside
changes; when the search for a block to claim has already failed, there is
no point in trying again for the next page.
Modify __rmqueue() to remember the last successful fallback mode, and
restart directly from there on the next rmqueue_bulk() iteration.
Oliver confirms that this improves beyond the regression that the test
robot reported against c2f6ea38fc1b:
commit: f3b92176f4 ("tools/selftests: add guard region test for /proc/$pid/pagemap") c2f6ea38fc ("mm: page_alloc: don't steal single pages from biggest buddy") acc4d5ff0b ("Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") 2c847f27c3 ("mm: page_alloc: speed up fallbacks in rmqueue_bulk()") <--- your patch
Lorenzo Stoakes [Fri, 21 Mar 2025 10:09:37 +0000 (10:09 +0000)]
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we only
actually modify VMAs after OOM conditions might arise, add a 'give up on
oom' option and make an explicit contract that, should this flag be set, we
absolutely will not modify any VMAs should OOM arise and just bail out.
Since it'd be very unusual for a user to try to vma_modify() with this flag
set but be specifying a range within a VMA which ends up being split (which
can fail due to rlimit issues, not only OOM), we add a debug warning for
this condition.
The motivating reason for this is uffd release - syzkaller (and Pedro
Falcato's VERY astute analysis) found a way in which an injected fault on
allocation, triggering an OOM condition on commit merge, would result in
uffd code becoming confused and treating an error value as if it were a VMA
pointer.
To avoid this, we make use of this new VMG flag to ensure that this never
occurs, utilising the fact that, should we be clearing entire VMAs, we do
not wish an OOM event to be reported to us.
Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for
his insightful and intelligent analysis of the situation, both of whom were
instrumental in this fix.
Link: https://lkml.kernel.org/r/20250321100937.46634-1-lorenzo.stoakes@oracle.com Reported-by: syzbot+20ed41006cf9d842c2b5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67dc67f0.050a0220.25ae54.001e.GAE@google.com/ Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Suggested-by: Pedro Falcato <pfalcato@suse.de> Suggested-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Brown [Fri, 4 Apr 2025 16:42:32 +0000 (17:42 +0100)]
selftests/mm: generate a temporary mountpoint for cgroup filesystem
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org Fixes: 209376ed2a84 ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Aishwarya TCV <aishwarya.tcv@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baoquan He [Fri, 28 Mar 2025 10:44:02 +0000 (18:44 +0800)]
MAINTAINERS: add Andrew and Baoquan as kexec maintainers
Add Andrew as kexec/kdump maintainer because he has been helping review
and merge ready kexec/kdump patches.
And I would like to nominate myself as kexec maintainer because I always
try to review generic kexec codes.
Link: https://lkml.kernel.org/r/20250328104402.16826-1-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Dave Young <dyoung@redhat.com> Acked-by: Simon Horman <horms@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Thu, 3 Apr 2025 06:41:38 +0000 (14:41 +0800)]
mm/hugetlb: fix nid mismatch in alloc_surplus_hugetlb_folio()
It's wrong to use nid directly since the nid may be changed in allocation.
Use folio_nid() to obtain the nid of folio instead.
Fix: 2273dea6b1e1 ("mm/hugetlb: update nr_huge_pages and surplus_huge_pages together") Link: https://lkml.kernel.org/r/20250403064138.2867929-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexei Starovoitov [Mon, 31 Mar 2025 00:28:09 +0000 (17:28 -0700)]
mm/page_alloc: avoid second trylock of zone->lock
spin_trylock followed by spin_lock will cause extra write cache access.
If the lock is contended it may cause unnecessary cache line bouncing and
will execute redundant irq restore/save pair. Therefore, check
alloc/fpi_flags first and use spin_trylock or spin_lock.
Link: https://lkml.kernel.org/r/20250331002809.94758-1-alexei.starovoitov@gmail.com Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkman <daniel@iogearbox.net> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/compaction: fix bug in hugetlb handling pathway
The compaction code doesn't take references on pages until we're certain
we should attempt to handle it.
In the hugetlb case, isolate_or_dissolve_huge_page() may return -EBUSY
without taking a reference to the folio associated with our pfn. If our
folio's refcount drops to 0, compound_nr() becomes unpredictable, making
low_pfn and nr_scanned unreliable. The user-visible effect is minimal -
this should rarely happen (if ever).
Fix this by storing the folio statistics earlier on the stack (just like
the THP and Buddy cases).
Also revert commit 66fe1cf7f581 ("mm: compaction: use helper compound_nr
in isolate_migratepages_block") to make backporting easier.
Link: https://lkml.kernel.org/r/20250401021025.637333-1-vishal.moola@gmail.com Fixes: 369fa227c219 ("mm: make alloc_contig_range handle free hugetlb pages") Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lib/iov_iter: fix to increase non slab folio refcount
When testing EROFS file-backed mount over v9fs on qemu, I encountered a
folio UAF issue. The page sanity check reports the following call trace.
The root cause is that pages in bvec are coalesced across a folio bounary.
The refcount of all non-slab folios should be increased to ensure
p9_releas_pages can put them correctly.
locking/local_lock, mm: replace localtry_ helpers with local_trylock_t type
Partially revert commit 0aaddfb06882 ("locking/local_lock: Introduce
localtry_lock_t"). Remove localtry_*() helpers, since localtry_lock()
name might be misinterpreted as "try lock".
Introduce local_trylock[_irqsave]() helpers that only work with newly
introduced local_trylock_t type. Note that attempt to use
local_trylock[_irqsave]() with local_lock_t will cause compilation
failure.
The existing local_lock_*() macros can be used either with local_lock_t or
local_trylock_t. With local_trylock_t they set acquired = 1 while
local_unlock_*() clears it.
In !PREEMPT_RT local_lock_irqsave(local_lock_t *) disables interrupts to
protect critical section, but it doesn't prevent NMI, so the fully
reentrant code cannot use local_lock_irqsave(local_lock_t *) for exclusive
access.
The local_lock_irqsave(local_trylock_t *) helper disables interrupts and
sets acquired=1, so local_trylock_irqsave(local_trylock_t *) from NMI
attempting to acquire the same lock will return false.
In PREEMPT_RT local_lock_irqsave() maps to preemptible spin_lock(). Map
local_trylock_irqsave() to preemptible spin_trylock(). When in hard IRQ
or NMI return false right away, since spin_trylock() is not safe due to
explicit locking in the underneath rt_spin_trylock() implementation.
Removing this explicit locking and attempting only "trylock" is undesired
due to PI implications.
The local_trylock() without _irqsave can be used to avoid the cost of
disabling/enabling interrupts by only disabling preemption, so
local_trylock() in an interrupt attempting to acquire the same lock will
return false.
Note there is no need to use local_inc for acquired variable, since it's a
percpu variable with strict nesting scopes.
Note that guard(local_lock)(&lock) works only for "local_lock_t lock".
The patch also makes sure that local_lock_release(l) is called before
WRITE_ONCE(l->acquired, 0). Though IRQs are disabled at this point the
local_trylock() from NMI will succeed and local_lock_acquire(l) will warn.
Link: https://lkml.kernel.org/r/20250403025514.41186-1-alexei.starovoitov@gmail.com Fixes: 0aaddfb06882 ("locking/local_lock: Introduce localtry_lock_t") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Daniel Borkman <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com Fixes: cc86e0c2f306 ("radix tree test suite: add support for slab bulk APIs") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shannon Nelson [Wed, 2 Apr 2025 16:56:30 +0000 (09:56 -0700)]
pds_fwctl: Fix type and endian complaints
Fix a number of type and endian complaints from the sparse checker.
Link: https://patch.msgid.link/r/20250402165630.24288-1-shannon.nelson@amd.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504020246.Dfbhxoo9-lkp@intel.com/ Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dan Williams [Thu, 10 Apr 2025 18:27:40 +0000 (11:27 -0700)]
fwctl/cxl: Fix uuid_t usage in uapi
The uuid_t type is kernel internal, and Paul reports the following build
error when it is used in a uapi header:
usr/include/cxl/features.h:59:9: error: unknown type name ‘uuid_t’
Create a uuid type (__uapi_uuid_t) compatible with the longstanding
definition uuid/uuid.h for userspace builds, and use uuid_t directly for
kernel builds.
Fixes: 9b8e73cdb141 ("cxl: Move cxl feature command structs to user header") Link: https://patch.msgid.link/r/174430961702.617339.13963021112051029933.stgit@dwillia2-xfh.jf.intel.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reported-by: Paul E. McKenney <paulmck@kernel.org> Closes: http://lore.kernel.org/f6489337-67c7-48c8-b48a-58603ec15328@paulmck-laptop Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504050434.Eb4vugh5-lkp@intel.com/ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
Steven Rostedt [Wed, 9 Apr 2025 15:15:51 +0000 (11:15 -0400)]
tracing/selftest: Add test to better test subops filtering of function graph
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Wed, 9 Apr 2025 15:15:50 +0000 (11:15 -0400)]
ftrace: Fix accounting of subop hashes
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Andy Chiu [Tue, 8 Apr 2025 16:02:57 +0000 (00:02 +0800)]
ftrace: Properly merge notrace hashes
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many") Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Zhangfei Gao [Mon, 17 Mar 2025 01:13:52 +0000 (01:13 +0000)]
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/ Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml: maintainers:0: 'Frank Li' does not match '@'
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Convert the raw spinlock used by BPF ringbuf to rqspinlock. Currently,
we have an open syzbot report of a potential deadlock. In addition, the
ringbuf can fail to reserve spuriously under contention from NMI
context.
It is potentially attractive to enable unconstrained usage (incl. NMIs)
while ensuring no deadlocks manifest at runtime, perform the conversion
to rqspinlock to achieve this.
This change was benchmarked for BPF ringbuf's multi-producer contention
case on an Intel Sapphire Rapids server, with hyperthreading disabled
and performance governor turned on. 5 warm up runs were done for each
case before obtaining the results.
There's a fair amount of noise in the benchmark, with numbers on reruns
going up and down by 10%, so all changes are in the range of this
disturbance, and we see no major regressions.
Namhyung Kim [Thu, 10 Apr 2025 01:02:52 +0000 (18:02 -0700)]
perf tools: Remove evsel__handle_error_quirks()
The evsel__handle_error_quirks() is to fixup invalid event attributes on
some architecture based on the error code. Currently it's only used for
AMD to disable precise_ip not to use IBS which has more restrictions.
But the commit c33aea446bf555ab changed call evsel__precise_ip_fallback
for any errors so there's no difference with the above function. To
make matter worse, it caused a problem with branch stack on Zen3.
The IBS doesn't support branch stack so it should use a regular core
PMU event. The default event is set precise_max and it starts with 3.
And evsel__precise_ip_fallback() tries with it and reduces the level one
by one. At last it tries with 0 but it also failed on Zen3 since the
branch stack is not supported for the cycles event.
At this point, evsel__precise_ip_fallback() restores the original
precise_ip value (3) in the hope that it can succeed with other modifier
(like exclude_kernel). Then evsel__handle_error_quirks() see it has
precise_ip != 0 and make it retry with 0. This created an infinite
loop.
Before:
$ perf record -b -vv |& grep removing
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
...
After:
$ perf record -b true
Error:
Failure to open event 'cycles:P' on PMU 'cpu' which will be removed.
Invalid event (cycles:P) in per-thread mode, enable system wide with '-a'.
Error:
Failure to open any events for recording.
Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linux
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Merge tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Merge tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Merge tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
Christian Brauner [Fri, 11 Apr 2025 14:41:48 +0000 (16:41 +0200)]
Merge tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Bring in overlayfs fixes for the current cycle.
* tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove unused forward declaration
ovl: don't allow datadir only
Jan Stancek [Thu, 10 Apr 2025 15:05:42 +0000 (17:05 +0200)]
fs: use namespace_{lock,unlock} in dissolve_on_fput()
In commit b73ec10a4587 ("fs: add fastpath for dissolve_on_fput()"),
the namespace_{lock,unlock} has been replaced with scoped_guard
using the namespace_sem. This however now also skips processing of
'unmounted' list in namespace_unlock(), and mount is not (immediately)
cleaned up.
For example, this causes LTP move_mount02 fail:
...
move_mount02.c:80: TPASS: invalid-from-fd: move_mount() failed as expected: EBADF (9)
move_mount02.c:80: TPASS: invalid-from-path: move_mount() failed as expected: ENOENT (2)
move_mount02.c:80: TPASS: invalid-to-fd: move_mount() failed as expected: EBADF (9)
move_mount02.c:80: TPASS: invalid-to-path: move_mount() failed as expected: ENOENT (2)
move_mount02.c:80: TPASS: invalid-flags: move_mount() failed as expected: EINVAL (22)
tst_test.c:1833: TINFO: === Testing on ext3 ===
tst_test.c:1170: TINFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.47.2 (1-Jan-2025)
/dev/loop0 is apparently in use by the system; will not make a filesystem here!
tst_test.c:1170: TBROK: mkfs.ext3 failed with exit code 1
The test makes number of move_mount() calls but these are all designed to fail
with specific errno. Even after test, 'losetup -d' can't detach loop device.
Define a new guard for dissolve_on_fput, that will use namespace_{lock,unlock}.
In iomap_adjust_read_range, i is either the first !uptodate block, or it
is past last for the second loop looking for trailing uptodate blocks.
Assuming there's no overflow (there's no combination of huge folios and
tiny blksize) then yeah, there is no point in retesting that the same
block pointed to by i is uptodate since we hold the folio lock so nobody
else could have set it uptodate.
Signed-off-by: Gou Hao <gouhao@uniontech.com> Link: https://lore.kernel.org/20250410071236.16017-1-gouhao@uniontech.com Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
Song Liu [Wed, 9 Apr 2025 22:05:34 +0000 (15:05 -0700)]
fs: Fix filename init after recent refactoring
getname_flags() should save __user pointer "filename" in filename->uptr.
However, this logic is broken by a recent refactoring. Fix it by passing
__user pointer filename to helper initname().
Fixes: 611851010c74 ("fs: dedup handling of struct filename init and refcounts bumps") Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/20250409220534.3635801-1-song@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
projects / nvme.git / log