>From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST
bit is cleared, we must wait at least 50ms before accessing the PHY
domain (synchronization delay).
Add native DSD support quirk for Luxman DA-06 DAC, by adding the
PID/VID 1852:5065.
Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()"
to cover broader device family sharing the same USB audio
implementation(*).
For the same reason, rename "is_teac_dsd_dac()" function to
"is_itf_usb_dsd_3alts_dac()".
(*)
These devices have the same USB controller "ITF-USB DSD", supplied by
INTERFACE Co., Ltd.
"ITF-USB DSD" USB controller has two patterns,
Pattern 1. (2 altsets version)
- Altset 0: for control
- Altset 1: for stream (S32)
- Altset 2: for stream (S32, DSD_U32)
Pattern 2. (3 altsets version)
- Altset 0: for control
- Altset 1: for stream (S16)
- Altset 2: for stream (S32)
- Altset 3: for stream (S32, DSD_U32)
"is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1"
USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if
"Pattern2".
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".
The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:
This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.
If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:
< In resume >
- genpd_resume_noirq() runs and enable the clk (enable_count = 1)
- cpg_mssr_resume_noirq() restores the clk register.
-- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
will disable the clk and keep the enable_count.
- Even if xhci_plat_resume() calls clk_prepare_enable(), since
the enable_count is 1, the clk will be not enabled.
After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.
ACM driver may accept data to transmit while system is not fully
resumed. In this case ACM driver buffers data and prepare URBs
on usb anchor list.
There is a little chance that two tasks put a char and initiate
acm_tty_flush_chars(). In such a case, driver will put one URB
twice on usb anchor list.
This patch also reset length of data before resue of a buffer.
This not only prevent sending rubbish, but also lower risc of race.
Without this patch we hit following kernel panic in one of our
stabilty/stress tests.
We should call dwc2_hsotg_enqueue_setup() after properly
setting lx_state. Because it may cause error-out from
dwc2_hsotg_enqueue_setup() due to wrong value in lx_state.
Issue can be reproduced by loading driver while connected
A-Connector (start in A-HOST mode) then disconnect A-Connector
to switch to B-DEVICE.
Clang reports the following warning:
drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array
'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (ep->name)
~~ ~~~~^~~~
It seems that the authors intention was to check if the ep has been
configured through struct_ep_setup. Check whether struct usb_ep name
pointer has been set instead.
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there are multiple functions associated with a configuration, then
the UAC2 interfaces may not start at zero. Set the correct first
interface number in the association descriptor so that the audio
interfaces are enumerated correctly in this case.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting crashes after memory allocation failure inside
do_kexec_load() [1]. This is because free_transition_pgtable() is called
by both init_transition_pgtable() and machine_kexec_cleanup() when memory
allocation failed inside init_transition_pgtable().
Regarding 32bit code, machine_kexec_free_page_tables() is called by both
machine_kexec_alloc_page_tables() and machine_kexec_cleanup() when memory
allocation failed inside machine_kexec_alloc_page_tables().
Fix this by leaving the error handling to machine_kexec_cleanup()
(and optionally setting NULL after free_page()).
syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1]. This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().
As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work(). Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().
There's currently no limit on wiphy names, other than netlink
message size and memory limitations, but that causes issues when,
for example, the wiphy name is used in a uevent, e.g. in rfkill
where we use the same name for the rfkill instance, and then the
buffer there is "only" 2k for the environment variables.
This was reported by syzkaller, which used a 4k name.
Limit the name to something reasonable, I randomly picked 128.
Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2d1d4c1e591f made loop_get_status() drop lo_ctx_mutex before
returning, but the loop_get_status_old(), loop_get_status64(), and
loop_get_status_compat() wrappers don't call loop_get_status() if the
passed argument is NULL. The callers expect that the lock is dropped, so
make sure we drop it in that case, too.
We hit an issue where a loop device on NFS was stuck in
loop_get_status() doing vfs_getattr() after the NFS server died, which
caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex.
There's no reason to hold this lock while we wait on the filesystem;
let's drop it so that other processes can do their thing. We need to
grab a reference on lo_backing_file while we use it, and we can get rid
of the check on lo_device, which has been unnecessary since commit a34c0ae9ebd6 ("[PATCH] loop: remove the bio remapping capability") in
the linux-history tree.
zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's
rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen
adapter ERP action via zfcp_erp_action_enqueue(). Both are separately
processed asynchronously and concurrently.
Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It
calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via
zfcp_dbf_rec_trig(). zfcp_dbf_rec_trig() acquires the DBF REC spin lock
and then iterates with list_for_each() over the adapter's ERP ready list
without holding the ERP lock. This opens a race window in which the
current list entry can be moved to another list, causing list_for_each()
to iterate forever on the wrong list, as the erp_ready_head is never
encountered as terminal condition.
Meanwhile the ERP action can be processed in the ERP thread by
zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP
lock and then calls zfcp_erp_action_to_running() to move the ERP action
from the ready to the running list. zfcp_erp_action_to_running() can
move the ERP action using list_move() just during the aforementioned
race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run().
zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is
held by the infinitely looping kworker, it effectively spins forever.
Any adapter recovery can trigger this, such as setting the device offline
or reboot.
V4.9 commit 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport
during rport gone") introduced additional tracing of (un)blocking of
rports. It missed that the adapter->erp_lock must be held when calling
zfcp_dbf_rec_trig().
This fix uses the approach formerly introduced by commit aa0fec62391c
("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got
later removed by commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.").
Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that
acquires and releases the adapter->erp_lock for read.
Reported-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Fixes: 4eeaa4f3f1d6 ("zfcp: close window with unblocked rport during rport gone") Cc: <stable@vger.kernel.org> # 2.6.32+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This shall help avoid copying uninitialized memory to the userspace when
calling ioctl(fd, SG_IO) with an empty command.
Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ata device doing EH, some commands still attached with tasks are
not passed to libata when abort failed or recover failed, so libata did
not handle these commands. After these commands done, sas task is freed,
but ata qc is not freed. This will cause ata qc leak and trigger a
warning like below:
If ata qc leaked too many, ata tag allocation will fail and io blocked
for ever.
As suggested by Dan Williams, defer ata device commands to libata and
merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle
ata qcs correctly after this.
Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: Xiaofei Tan <tanxiaofei@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx
assembler stubs and the indirect branches generated by the JIT itself
need to be converted to expolines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nospec-branch.c file is compiled without the gcc options to
generate expoline thunks. The return branch of the sysfs show
functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect
branch as well. These need to be compiled with expolines.
Move the sysfs functions for spectre reporting to a separate file
and loose an '.' for one of the messages.
Cc: stable@vger.kernel.org # 4.16 Fixes: d424986f1d ("s390: add sysfs attributes for spectre") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.
The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the memmove, memset, memcpy, __memset16, __memset32 and
__memset64 functions are done with "br %r14". These are indirect branches
as well and need to use execute trampolines for CONFIG_EXPOLINE=y.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the
crc32_be_vgfm_16 functions are done with "br %r14". These are indirect
branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y.
Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a header with macros usable in assembler files to emit alternative
code sequences. It works analog to the alternatives for inline assmeblies
in C files, with the same restrictions and capabilities.
The syntax is
ALTERNATIVE "<default instructions sequence>", \
"<alternative instructions sequence>", \
"<features-bit>"
and
open file, unlink it, then use ioctl(2) to make it immutable or
append only. Now close it and watch the blocks *not* freed...
Immutable/append-only checks belong in ->setattr().
Note: the bug is old and backport to anything prior to 737f2e93b972
("ext2: convert to use the new truncate convention") will need
these checks lifted into ext2_setattr().
Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning -ENODEV.
Instead of returning the device instabce, we take the exit path where
we call netif_device_attach()
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus
This didn't work for WS2016 hosts. Commit 0cf737808ae7
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL
That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a05c1
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus
However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.
Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
struct vmbus_channel_gpadl_teardown *msg;
struct vmbus_channel_msginfo *info;
unsigned long flags;
int ret;
info = kmalloc(sizeof(*info) +
sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
if (!info)
return -ENOMEM;
The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts
Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions
Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When changing network interface settings, Windows guests
older than WS2016 can no longer shutdown. This was addressed
by commit 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order
on older versions"), however the issue also occurs on WS2012
guests that share NVSP protocol versions with WS2016 guests.
Hence we use Windows version directly to differentiate them.
Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make common function for detaching internals of device
during changes to MTU and RSS. Make sure no more packets
are transmitted and all packets have been received before
doing device teardown.
Change the wait logic to be common and use usleep_range().
Changes transmit enabling logic so that transmit queues are disabled
during the period when lower device is being changed. And enabled
only after sub channels are setup. This avoids issue where it could
be that a packet was being sent while subchannel was not initialized.
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On older versions of Windows, the host ignores messages after
vmbus channel is closed.
Workaround this by doing what Windows does and send the teardown
before close on older versions of NVSP protocol.
Reported-by: Mohammed Gamal <mgamal@redhat.com> Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The receive processing may continue to happen while the
internal network device state is in RCU grace period.
The internal RNDIS structure is associated with the
internal netvsc_device structure; both have the same
RCU lifetime.
Defer freeing all associated parts until after grace
period.
Fixes: 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes sure that no CPU is still process packets when
the channel is closed.
Fixes: 76bb5db5c749 ("netvsc: fix use after free on module removal") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When VF is used for accelerated networking it will likely have
more queues (and different policy) than the synthetic NIC.
This patch defers the queue policy to the VF so that all the
queues can be used. This impacts workloads like local generate UDP.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race between napi_reschedule and re-enabling interrupts
which could lead to missed host interrrupts. This occurs when
interrupts are re-enabled (hv_end_read) and vmbus irq callback
(netvsc_channel_cb) has already scheduled NAPI.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Block setup of multiple channels earlier in the teardown
process. This avoids possible races between halt and subchannel
initialization.
Suggested-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Need to delete NAPI association if vmbus_open fails.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the initialization order so that the device is ready to transmit
(ie connect vsp is completed) before setting the internal reference
to the device with RCU.
This avoids any races on initialization and prevents retry issues
on shutdown.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we no longer localize channel/CPU affiliation within one NUMA
node, num_online_cpus() is used as the number of channel cap, instead of
the number of processors in a NUMA node.
This patch allows a bigger range for tuning the number of channels.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the transmit queue is known full, then don't keep aggregating
data. And the cp_partial flag which indicates that the current
aggregation buffer is full can be folded in to avoid more
conditionals.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rndis_filter_device_add() is called both from netvsc_probe() when we
initially create the device and from set channels/mtu/ringparam
routines where we basically remove the device and add it back.
hw_features is reset in rndis_filter_device_add() and filled with
host data. However, we lose all additional flags which are set outside
of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and
many others.
Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()}
calls cannot be avoided on every RNDIS reset: host expects us to set
required features explicitly. Moreover, in theory hardware capabilities
can change and we need to reflect the change in hw_features.
Reset net->hw_features bits according to host data in
rndis_netdev_set_hwcaps(), clear corresponding feature bits
from net->features in case some features went missing (will never happen
in real life I guess but let's be consistent).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was found that in some cases host refuses to teardown GPADL for send/
receive buffers (probably when some work with these buffere is scheduled or
ongoing). Change the teardown logic to be:
1) Send NVSP_MSG1_TYPE_REVOKE_* messages
2) Close the channel
3) Teardown GPADLs.
This seems to work reliably.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases, like internal vSwitch, the host doesn't provide
send indirection table updates. This patch sets the table to be
equal weight after subchannels are all open. Otherwise, all workload
will be on one TX channel.
As tested, this patch has largely increased the throughput over
internal vSwitch.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tx_table is part of the private data of kernel net_device. It is only
zero-ed out when allocating net_device.
We may recreate netvsc_device w/o recreating net_device, so the private
netdev data, including tx_table, are not zeroed. It may contain channel
numbers for the older netvsc_device.
This patch adds initialization of tx_table each time we recreate
netvsc_device.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename this variable because it is the Receive indirection
table.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For older hosts without multi-channel (vRSS) support, and some error
cases, we still need to set the real number of queues to one.
This patch adds this missing setting.
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gen bits must be read first from (resp. written last to) DMA memory.
The proper way to enforce this on Linux is to call dma_rmb() (resp.
dma_wmb()).
Signed-off-by: Regis Duchesne <hpreg@vmware.com> Acked-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA mask must be set before, not after, the first DMA map operation, or
the first DMA map operation could in theory fail on some systems.
Fixes: b0eb57cb97e78 ("VMXNET3: Add support for virtual IOMMU") Signed-off-by: Regis Duchesne <hpreg@vmware.com> Acked-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We must not call sock_diag_has_destroy_listeners(sk) on a socket
that has no reference on net structure.
BUG: KASAN: use-after-free in sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
BUG: KASAN: use-after-free in __sk_free+0x329/0x340 net/core/sock.c:1609
Read of size 8 at addr ffff88018a02e3a0 by task swapper/1/0
Packet sockets allow construction of packets shorter than
dev->hard_header_len to accommodate protocols with variable length
link layer headers. These packets are padded to dev->hard_header_len,
because some device drivers interpret that as a minimum packet size.
packet_snd reserves dev->hard_header_len bytes on allocation.
SOCK_DGRAM sockets call skb_push in dev_hard_header() to ensure that
link layer headers are stored in the reserved range. SOCK_RAW sockets
do the same in tpacket_snd, but not in packet_snd.
Syzbot was able to send a zero byte packet to a device with massive
116B link layer header, causing padding to cross over into skb_shinfo.
Fix this by writing from the start of the llheader reserved range also
in the case of packet_snd/SOCK_RAW.
Update skb_set_network_header to the new offset. This also corrects
it for SOCK_DGRAM, where it incorrectly double counted reserve due to
the skb_push in dev_hard_header.
Fixes: 9ed988cd5915 ("packet: validate variable length ll headers") Reported-by: syzbot+71d74a5406d02057d559@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.
Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.
This issue predates git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible to crash the kernel in several different ways by sending
messages to the SMC_PNETID generic netlink family that are missing the
expected attributes:
- Missing SMC_PNETID_NAME => null pointer dereference when comparing
names.
- Missing SMC_PNETID_ETHNAME => null pointer dereference accessing
smc_pnetentry::ndev.
- Missing SMC_PNETID_IBNAME => null pointer dereference accessing
smc_pnetentry::smcibdev.
- Missing SMC_PNETID_IBPORT => out of bounds array access to
smc_ib_device::pattr[-1].
Fix it by validating that all expected attributes are present and that
SMC_PNETID_IBPORT is nonzero.
Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com Fixes: 6812baabf24d ("smc: establish pnet table management") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a red qdisc is updated with a 0 limit, the child qdisc is left
unmodified, no additional scheduler is created in red_change(),
the 'child' local variable is rightfully NULL and must not add it
to the hash table.
This change addresses the above issue moving qdisc_hash_add() right
after the child qdisc creation. It additionally removes unneeded checks
for noop_qdisc.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 49b499718fa1 ("net: sched: make default fifo qdiscs appear in the dump") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similarly to what was done with commit a52956dfc503 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.
Fixes: 5026c9b1bafc ("net sched: vlan action fix late binding") CC: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid exiting the function with a lingering sysfs file (if the first
call to device_create_file() fails while the second succeeds), and avoid
calling devlink_port_unregister() twice.
In other words, either mlx4_init_port_info() succeeds and returns zero, or
it fails, returns non-zero, and requires no cleanup.
Fixes: 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While removing queues from the XPS map, the individual CPU ID
alone was used to index the CPUs map, this should be changed to also
factor in the traffic class mapping for the CPU-to-queue lookup.
Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the necessary logic for supporting the emulated VIRT_SPEC_CTRL MSR to
x86_virt_spec_ctrl(). If either X86_FEATURE_LS_CFG_SSBD or
X86_FEATURE_VIRT_SPEC_CTRL is set then use the new guest_virt_spec_ctrl
argument to check whether the state must be modified on the host. The
update reuses speculative_store_bypass_update() so the ZEN-specific sibling
coordination can be reused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_spec_ctrL_mask is intended to mask out bits from a MSR_SPEC_CTRL value
which are not to be modified. However the implementation is not really used
and the bitmask was inverted to make a check easier, which was removed in
"x86/bugs: Remove x86_spec_ctrl_set()"
Aside of that it is missing the STIBP bit if it is supported by the
platform, so if the mask would be used in x86_virt_spec_ctrl() then it
would prevent a guest from setting STIBP.
Add the STIBP bit if supported and use the mask in x86_virt_spec_ctrl() to
sanitize the value which is supplied by the guest.
x86_spec_ctrl_set() is only used in bugs.c and the extra mask checks there
provide no real value as both call sites can just write x86_spec_ctrl_base
to MSR_SPEC_CTRL. x86_spec_ctrl_base is valid and does not need any extra
masking or checking.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86_spec_ctrl_base is the system wide default value for the SPEC_CTRL MSR.
x86_spec_ctrl_get_default() returns x86_spec_ctrl_base and was intended to
prevent modification to that variable. Though the variable is read only
after init and globaly visible already.
Remove the function and export the variable instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function bodies are very similar and are going to grow more almost
identical code. Add a bool arg to determine whether SPEC_CTRL is being set
for the guest or restored to the host.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upcoming support for the virtual SPEC_CTRL MSR on AMD needs to reuse
speculative_store_bypass_update() to avoid code duplication. Add an
argument for supplying a thread info (TIF) value and create a wrapper
speculative_store_bypass_update_current() which is used at the existing
call site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD64_LS_CFG MSR is a per core MSR on Family 17H CPUs. That means when
hyperthreading is enabled the SSBD bit toggle needs to take both cores into
account. Otherwise the following situation can happen:
CPU0 CPU1
disable SSB
disable SSB
enable SSB <- Enables it for the Core, i.e. for CPU0 as well
So after the SSB enable on CPU1 the task on CPU0 runs with SSB enabled
again.
On Intel the SSBD control is per core as well, but the synchronization
logic is implemented behind the per thread SPEC_CTRL MSR. It works like
this:
i.e. if one of the threads enables a mitigation then this affects both and
the mitigation is only disabled in the core when both threads disabled it.
Add the necessary synchronization logic for AMD family 17H. Unfortunately
that requires a spinlock to serialize the access to the MSR, but the locks
are only shared between siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The availability of the SPEC_CTRL MSR is enumerated by a CPUID bit on
Intel and implied by IBRS or STIBP support on AMD. That's just confusing
and in case an AMD CPU has IBRS not supported because the underlying
problem has been fixed but has another bit valid in the SPEC_CTRL MSR,
the thing falls apart.
Add a synthetic feature bit X86_FEATURE_MSR_SPEC_CTRL to denote the
availability on both Intel and AMD.
While at it replace the boot_cpu_has() checks with static_cpu_has() where
possible. This prevents late microcode loading from exposing SPEC_CTRL, but
late loading is already very limited as it does not reevaluate the
mitigation options and other bits and pieces. Having static_cpu_has() is
the simplest and least fragile solution.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel and AMD have different CPUID bits hence for those use synthetic bits
which get set on the respective vendor's in init_speculation_control(). So
that debacles like what the commit message of
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but
before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current'
to determine the host SSBD state of the thread. 'current' is GS based, but
host GS is not yet restored and the access causes a triple fault.
Move the call after the host GS restore.
Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 7bb4d366c ("x86/bugs: Make cpu_show_common() static") Fixes: 24f7fc83b ("x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation") Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel collateral will reference the SSB mitigation bit in IA32_SPEC_CTL[2]
as SSBD (Speculative Store Bypass Disable).
Hence changing it.
It is unclear yet what the MSR_IA32_ARCH_CAPABILITIES (0x10a) Bit(4) name
is going to be. Following the rename it would be SSBD_NO but that rolls out
to Speculative Store Bypass Disable No.
Also fixed the missing space in X86_FEATURE_AMD_SSBD.
[ tglx: Fixup x86_amd_rds_enable() and rds_tif_to_amd_ls_cfg() as well ]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The migitation control is simpler to implement in architecture code as it
avoids the extra function call to check the mode. Aside of that having an
explicit seccomp enabled mode in the architecture mitigations would require
even more workarounds.
Move it into architecture code and provide a weak function in the seccomp
code. Remove the 'which' argument as this allows the architecture to decide
which mitigations are relevant for seccomp.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / jedix / linux-maple.git / log