Alexander Stein [Wed, 27 Jul 2022 09:37:59 +0000 (11:37 +0200)]
dt-bindings: usb: Add binding for TI USB8041 hub controller
The TI USB8041 is a USB 3.0 hub controller with 4 ports.
This initial version of the binding only describes USB related aspects
of the USB8041, it does not cover the option of connecting the controller
as an i2c slave.
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
Add support for Microchip USB2514B USB 2.0 hub to the onboard usb hub
driver. Adopt the generic usb-device compatible ("usbVID,PID").
Some STM32MP1 boards have this hub on-board, with a supply that needs to
be enabled for proper operation.
Allow properties and usb-device child nodes as defined in usb-hcd.yaml, by
using unevaluatedProperties: false. By the way, remove the "companion"
property as it's redundant with usb-hcd.yaml.
As example, this allows an onboard hub, to be described in generic-ehci
controller node:
usb {
compatible = "generic-ehci";
#address-cells = <1>;
#size-cells = <0>;
/* onboard HUB */
hub@1 {
compatible = "usb424,2514";
reg = <1>;
vdd-supply = <&v3v3>;
};
};
Without this, dtbs_check complains on '#address-cells', '#size-cells',
'hub@1' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: ..../generic-ehci.yaml
STM32G0 comes with STM32 bootloader in its system memory. Add support
for some I2C bootloader commands as described in application notes
AN2606 and AN4221, to enable STM32G0 UCSI firmware update.
Upon probing, the driver needs to know the STM32G0 state:
- In bootloader mode, STM32 G0 answers at i2c addr 0x51.
- In running mode, STM32 G0 firmware may answer at two address.
- The main address specified in DT is used for UCSI.
- 0x51 addr can be re-used for FW controls like getting software version
or jump to booloader request.
So probe using the main firmware i2c address first, before attempting
bootloader address (e.g. check for blank, erased or previously aborted
firmware update).
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
STM32G0 provides an integrated USB Type-C and power delivery interface.
It can be programmed with a firmware to handle UCSI protocol over I2C
interface. A GPIO is used as an interrupt line.
Type-C connector can be used as a wakeup source (typically to detect
changes on the port, like attach or detach). PM suspend / resume routines
are used to enable wake irqs, and signal a wakeup event in case the IRQ
has fired while in suspend. The i2c core is doing the necessary
initialization when the "wakeup-source" flag is provided.
Note: the interrupt handler shouldn't be called before the i2c bus resumes.
So, the interrupts are disabled during suspend period, and re-enabled
upon resume, to avoid i2c transfer while suspended, from the irq handler.
dt-bindings: usb: typec: add bindings for stm32g0 controller
Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery)
controller.
STM32G0 provides an integrated USB Type-C and power delivery interface.
It can be programmed with a firmware to handle UCSI protocol over I2C
interface. A GPIO is used as an interrupt line.
It may be used as a wakeup source, so use optional "wakeup-source" and
"power-domains" properties to support wakeup.
The firmware itself may be flashed or later updated (optional). Choice is
let to the application to allow firmware update. A default firmware could
be already programmed in production and be customized (to not allow it).
So the firmware-name is made optional to represent this option.
Nícolas F. R. A. Prado [Mon, 25 Jul 2022 20:31:29 +0000 (16:31 -0400)]
usb: typec: retimer: Add missing id check in match callback
The fwnode_connection_find_match() function handles two cases: named
references and graph endpoints. In the second case, the match function
passed in is called with the id to check for the match. However, the
match function for the recently added type-c retimer class assumes the
connection has already been matched (which is only true for the first
case).
The result is that with that change, all type-c nodes with graph
endpoints defer probe indefinitely, independently of having a retimer
connection or not.
Add the missing check, like is done by the type-c mux and usb role
switch code, to fix the issue.
Fixes: ddaf8d96f93b ("usb: typec: Add support for retimers") Reviewed-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220725203129.1973260-1-nfraprado@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Thu, 21 Jul 2022 15:07:10 +0000 (11:07 -0400)]
USB: gadget: Fix use-after-free Read in usb_udc_uevent()
The syzbot fuzzer found a race between uevent callbacks and gadget
driver unregistration that can cause a use-after-free bug:
---------------------------------------------------------------
BUG: KASAN: use-after-free in usb_udc_uevent+0x11f/0x130
drivers/usb/gadget/udc/core.c:1732
Read of size 8 at addr ffff888078ce2050 by task udevd/2968
The bug occurs because usb_udc_uevent() dereferences udc->driver but
does so without acquiring the udc_lock mutex, which protects this
field. If the gadget driver is unbound from the udc concurrently with
uevent processing, the driver structure may be accessed after it has
been deallocated.
To prevent the race, we make sure that the routine holds the mutex
around the racing accesses.
Weitao Wang [Tue, 26 Jul 2022 07:49:18 +0000 (15:49 +0800)]
USB: HCD: Fix URB giveback issue in tasklet function
Usb core introduce the mechanism of giveback of URB in tasklet context to
reduce hardware interrupt handling time. On some test situation(such as
FIO with 4KB block size), when tasklet callback function called to
giveback URB, interrupt handler add URB node to the bh->head list also.
If check bh->head list again after finish all URB giveback of local_list,
then it may introduce a "dynamic balance" between giveback URB and add URB
to bh->head list. This tasklet callback function may not exit for a long
time, which will cause other tasklet function calls to be delayed. Some
real-time applications(such as KB and Mouse) will see noticeable lag.
In order to prevent the tasklet function from occupying the cpu for a long
time at a time, new URBS will not be added to the local_list even though
the bh->head list is not empty. But also need to ensure the left URB
giveback to be processed in time, so add a member high_prio for structure
giveback_urb_bh to prioritize tasklet and schelule this tasklet again if
bh->head list is not empty.
At the same time, we are able to prioritize tasklet through structure
member high_prio. So, replace the local high_prio_bh variable with this
structure member in usb_hcd_giveback_urb.
Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host:
xhci-plat: omit shared hcd if either root hub has no ports")
xhci->shared_hcd can be NULL, which causes the following Oops
on reboot:
Dan Carpenter [Fri, 22 Jul 2022 06:29:07 +0000 (09:29 +0300)]
usb: typec: anx7411: fix error checking in anx7411_get_gpio_irq()
This is a minor bug which means that certain error messages are not
printed.
The devm_gpiod_get_optional() function can return either error pointers
or NULL. It returns error pointers if there is an allocation failure,
or a similar issue. It returns NULL if no GPIO was assigned to the
requested function. Print an error in either case.
The gpiod_to_irq() function never returns zero. It either returns
a positive IRQ number or a negative error code.
Colin Ian King [Fri, 15 Jul 2022 22:56:57 +0000 (23:56 +0100)]
usb: phy: remove redundant store to variable var after & operation
There is no need to store the result of the & operation back to the
variable var. The store is redundant, replace &= with just &.
Cleans up clang scan warning:
drivers/usb/phy/phy-keystone.c:62:5: warning: Although the value stored to
'val' is used in the enclosing expression, the value is never actually read
from 'val' [deadcode.DeadStores]
Yan Xinyu [Mon, 25 Jul 2022 07:58:41 +0000 (09:58 +0200)]
USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
The usb_wwan_send_setup function generates DTR/RTS signals in compliance
with CDC ACM standard. This patch changes magic numbers in this function
to equivalent macros.
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
The chrome platform driver changes need to come in through the platform
tree due to some api changes that showed up there that cause build
errors in linux-next
platform/chrome: cros_typec_switch: Add ACPI Kconfig dep
Add the ACPI Kconfig dependency that was missed during the initial
driver submission. Fixes the following compiler errors:
drivers/platform/chrome/cros_typec_switch.c:93:9: error: call to
undeclared function 'acpi_evaluate_integer'; ISO C99 and later do not
support implicit function declarations
[-Wimplicit-function-declaration]
ret = acpi_evaluate_integer(adev->handle, "_ADR", NULL, &index);
drivers/platform/chrome/cros_typec_switch.c:93:35: error: incomplete
definition of type 'struct acpi_device'
ret = acpi_evaluate_integer(adev->handle, "_ADR", NULL, &index);
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix SIGSEGV when processing syscall args in perf.data files in 'perf
trace'
- Sync kvm, msr-index and cpufeatures headers with the kernel sources
- Fix 'convert perf time to TSC' 'perf test':
- No need to open events twice
- Fix finding correct event on hybrid systems
* tag 'perf-tools-fixes-for-v5.19-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf trace: Fix SIGSEGV when processing syscall args
perf tests: Fix Convert perf time to TSC test for hybrid
perf tests: Stop Convert perf time to TSC test opening events twice
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Matthew Auld [Tue, 12 Jul 2022 17:40:50 +0000 (18:40 +0100)]
drm/i915/ttm: fix 32b build
Since segment_pages is no longer a compile time constant, it looks the
DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest
is just to use the ULL variant, but really we should need not need more
than u32 for the page alignment (also we are limited by that due to the
sg->length type), so also make it all u32.
Merge tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- A single data race fix on the perf event cleanup path to avoid
endless loops due to insufficient locking
* tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
Merge tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Improve the check whether the kernel supports WP mappings so that it
can accomodate a XenPV guest due to how the latter is setting up the
PAT machinery
- Now that the retbleed nightmare is public, here's the first round of
fallout fixes:
* Fix a build failure on 32-bit due to missing include
* Remove an untraining point in espfix64 return path
* other small cleanups
* tag 'x86_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove apostrophe typo
um: Add missing apply_returns()
x86/entry: Remove UNTRAIN_RET from native_irq_return_ldt
x86/bugs: Mark retbleed_strings static
x86/pat: Fix x86_has_pat_wp()
x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
Merge tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
* tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document the units for resolution of size axes
Input: goodix - call acpi_device_fix_up_power() in some cases
Input: wm97xx - make .remove() obviously always return 0
Input: usbtouchscreen - add driver_info sanity check
perf trace: Fix SIGSEGV when processing syscall args
On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to
process a perf.data file created with 'perf trace record -p':
#0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492
#1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492
#2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486
#3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973
#4 syscall__scnprintf_args <snip> at builtin-trace.c:2041
#5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319
That points to the below code in tools/perf/builtin-trace.c:
/*
* If this is raw_syscalls.sys_enter, then it always comes with the 6 possible
* arguments, even if the syscall being handled, say "openat", uses only 4 arguments
* this breaks syscall__augmented_args() check for augmented args, as we calculate
* syscall->args_size using each syscalls:sys_enter_NAME tracefs format file,
* so when handling, say the openat syscall, we end up getting 6 args for the
* raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly
* thinking that the extra 2 u64 args are the augmented filename, so just check
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size);
As the comment points out, we should not be trying to augment the args
for raw_syscalls. However, when processing a perf.data file, we are not
initializing those properly. Fix the same.
Reported-by: Claudio Carvalho <cclaudio@linux.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220707090900.572584-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 13 Jul 2022 12:34:59 +0000 (15:34 +0300)]
perf tests: Fix Convert perf time to TSC test for hybrid
The test does not always correctly determine the number of events for
hybrids, nor allow for more than 1 evsel when parsing.
Fix by iterating the events actually created and getting the correct
evsel for the events processed.
Fixes: d9da6f70eb235110 ("perf tests: Support 'Convert perf time to TSC' test for hybrid") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 13 Jul 2022 12:34:58 +0000 (15:34 +0300)]
perf tests: Stop Convert perf time to TSC test opening events twice
Do not call evlist__open() twice.
Fixes: 5bb017d4b97a0f13 ("perf test: Fix error message for test case 71 on s390, where it is not supported") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220713123459.24145-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 9 May 2021 12:39:02 +0000 (09:39 -0300)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
1b870fa5573e260b ("kvm: stats: tell userspace which values are boolean")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/YtQLDvQrBhJNl3n5@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs reverts from David Sterba:
"Due to a recent report [1] we need to revert the radix tree to xarray
conversion patches.
There's a problem with sleeping under spinlock, when xa_insert could
allocate memory under pressure. We use GFP_NOFS so this is a real
problem that we unfortunately did not discover during review.
I'm sorry to do such change at rc6 time but the revert is IMO the
safer option, there are patches to use mutex instead of the spin locks
but that would need more testing. The revert branch has been tested on
a few setups, all seem ok.
The conversion to xarray will be revisited in the future"
Link: https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
* tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: turn delayed_nodes_tree into an XArray"
Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
Revert "btrfs: turn fs_info member buffer_radix into XArray"
Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
Merge tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Merge tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix building of out-of-tree kernel modules without a pre-built kernel
in case CONFIG_EXPOLINE_EXTERN=y.
- Fix a reference counting error that could prevent unloading of zcrypt
modules.
* tag 's390-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix error handling in __verify_queue_reservations()
s390/nospec: remove unneeded header includes
s390/nospec: build expoline.o for modules_prepare target
Merge tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki
"Fix recent regression in the cpufreq mediatek driver related to
incorrect handling of regulator_get_optional() return value
(AngeloGioacchino Del Regno)"
* tag 'pm-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: Handle sram regulator probe deferral
Merge tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix more fallout from recent changes of the ACPI CPPC handling on AMD
platforms (Mario Limonciello)"
* tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
Jason A. Donenfeld [Wed, 13 Jul 2022 15:11:15 +0000 (17:11 +0200)]
random: cap jitter samples per bit to factor of HZ
Currently the jitter mechanism will require two timer ticks per
iteration, and it requires N iterations per bit. This N is determined
with a small measurement, and if it's too big, it won't waste time with
jitter entropy because it'd take too long or not have sufficient entropy
anyway.
With the current max N of 32, there are large timeouts on systems with a
small CONFIG_HZ. Rather than set that maximum to 32, instead choose a
factor of CONFIG_HZ. In this case, 1/30 seems to yield sane values for
different configurations of CONFIG_HZ.
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Fixes: 78c768e619fb ("random: vary jitter iterations based on cycle counter speed") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid printing a warning when modules do not exercise any
errata-dependent behavior and the SiFive errata are enabled.
- A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes.
* tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: don't warn for sifive erratas in modules
riscv: dts: microchip: hook up the mpfs' l2cache
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"RISC-V:
- Fix missing PAGE_PFN_MASK
- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
- Fix for nested virtualization when TSC scaling is active
- Estimate the size of fastcc subroutines conservatively, avoiding
disastrous underestimation when return thunks are enabled
- Avoid possible use of uninitialized fields of 'struct
kvm_lapic_irq'
Generic:
- Mark as such the boolean values available from the statistics file
descriptors
- Clarify statistics documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulate: do not adjust size of fastop and setcc subroutines
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
Documentation: kvm: clarify histogram units
kvm: stats: tell userspace which values are boolean
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
riscv: Fix missing PAGE_PFN_MASK
Merge tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A folio locking fixup that Xiubo and David cooperated on, marked for
stable. Most of it is in netfs but I picked it up into ceph tree on
agreement with David"
* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
netfs: do not unlock and put the folio twice
Merge tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, none especially remarkable, plus a
MAINTAINERS file update due to the previous maintainer for the NXP
FSPI driver having left the company"
* tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Remove spi_master_put() in probe failure path
MAINTAINERS: change the NXP FSPI driver maintainer.
spi: amd: Limit max transfer and message size
spi: aspeed: Fix division by zero
spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
Merge tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix brightness key events getting reported twice on some Dells.
Regression caused by recent Panasonic hotkey fixes
- Fix poweroff no longer working on some devices regression caused
by recent poweroff handler rework
- Mark new (in 5.19) Intel IFS driver as broken, because of some
issues surrounding the userspace (sysfs) API which need to be
cleared up
- Some hardware-id / quirk additions"
* tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix acpi_video_handles_brightness_key_presses()
platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF
platform/x86/intel/ifs: Mark as BROKEN
platform/x86: asus-wmi: Add key mappings
efi: Fix efi_power_off() not being run before acpi_power_off() when necessary
platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4
platform/x86/amd/pmc: Add new platform support
platform/x86/amd/pmc: Add new acpi id for PMC controller
Merge tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular fixes pull for this week. This has a bunch of
amdgpu fixes, major one reverts the buddy allocator until it can be
tested more, otherwise just small ones, then i915 has a bunch of
fixes.
The outstanding firmware regressions reported by phoronix will
hopefully be dealt with ASAP.
amdgpu:
- revert buddy allocator support for now
- DP MST blank screen fix for specific platforms
- MEC firmware check fix for GC 10.3.7
- Deep color fix for DCE
- Fix possible divide by 0
- Coverage blend mode fix
- Fix cursor only commit timestamps
i915:
- Selftest fix
- TTM fix sg_table construction
- Error return fixes
- Fix a performance regression related to waitboost
- Fix GT resets"
* tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Ensure valid event timestamp for cursor-only commits
drm/amd/display: correct check of coverage blend mode
drm/amd/pm: Prevent divide by zero
drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.
drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7
drm/amd/display: Ignore First MST Sideband Message Return Error
drm/i915/selftests: fix subtraction overflow bug
drm/i915/gem: Look for waitboosting across the whole object prior to individual waits
drm/i915/gt: Serialize TLB invalidates with GT resets
drm/i915/gt: Serialize GRDOM access between multiple engine resets
drm/i915/ttm: fix sg_table construction
drm/i915/selftests: fix a couple IS_ERR() vs NULL tests
drm/i915: Fix vm use-after-free in vma destruction
drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()
Revert "drm/amdgpu: add drm buddy support to amdgpu"
Merge tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pyll sysctl fix from Luis Chamberlain:
"Only one fix for sysctl"
* tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
platform/chrome: cros_ec_typec: Get retimer handle
Where available, obtain the handle to retimer switch specified via
firmware, and update the mux configuration callsites to add retimer
support for supported modes.
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Register mode switch devices for Type C connectors, when they are
specified by firmware. These control Type C configuration for any USB
Type-C mode switches (sometimes known as "muxes") which are controlled
by the Chrome EC.
projects / linux.git / log