Arnd Bergmann [Fri, 13 May 2022 20:40:35 +0000 (22:40 +0200)]
Merge tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Delete no longer needed properties of MediaTek Larbs for MT2701.
* tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
Link: https://lore.kernel.org/r/b4383f23-0adc-b9de-a1d9-abd1c2f82b27@gmail.com
This concludes a cleanup that was started back in 2019, with an
incompatible DT binding change. Kernels before 5.18 can no longer
use the updated dtb from 5.19, and the drivers no longer parse the
old properties, which breaks compatibility with older dtb files.
Arnd Bergmann [Fri, 13 May 2022 19:52:09 +0000 (21:52 +0200)]
Merge tag 'at91-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 & LAN966 DT #1 for 5.19:
- at91: DT compliance updates to gic and dataflash nodes
- lan966: addition to many basic nodes for various peripherals
- lan966: Kontron KSwitch D10: support for this new board
and its network switch
Michael Walle [Mon, 2 May 2022 22:41:24 +0000 (00:41 +0200)]
ARM: dts: lan966x: add reset switch reset node
Add the switch reset node which will later be used by the switch driver.
The switch reset also resets the GPIO controller and the SGPIO
controller, thus it also has to be connectected to these nodes. This way
the reset will only issued once for the first device requesting the
reset.
Michael Walle [Mon, 2 May 2022 22:41:23 +0000 (00:41 +0200)]
ARM: dts: lan966x: add MIIM nodes
Add the MDIO controller nodes. The integrated PHYs are connected to the
second controller. This controller also takes care of the resets of the
integrated PHYs, thus it has two memory regions. The first controller
is routed to the external MDIO/MDC pins.
Michael Walle [Thu, 12 May 2022 08:12:46 +0000 (11:12 +0300)]
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
Add basic support for the Kontron KSwitch D10 MMT. It comes in two
variants: "6G-2GS" which features 6 Gigabit copper ports and two SFP
cages and "8G" which features 6 Gigbabit copper ports (where two are
2.5G capable).
For now the following is supported and working:
- Kernel console
- SFP cages
- SPI
- SGPIO
- Watchdog
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
[claudiu.beznea: fixed conflict on Makefile] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220502224127.2604333-8-michael@walle.cc Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Michael Walle [Mon, 2 May 2022 22:41:20 +0000 (00:41 +0200)]
ARM: dts: lan966x: add flexcom I2C nodes
Add all I2C nodes of the flexcom IP blocks. The driver supports
FIFO, DMA or both combined. But the latter isn't working correctly.
Thus, skip the fifo-size property for now. DMA is doing single byte
reads in this case.
Michael Walle [Mon, 2 May 2022 22:41:18 +0000 (00:41 +0200)]
ARM: dts: lan966x: add all flexcom usart nodes
Add all the remaining usart nodes for the flexcom block. Although the
DMA channels are specified, DMA is not enabled by default because break
detection doesn't work with DMA.
Eugen Hristev [Tue, 3 May 2022 13:31:27 +0000 (16:31 +0300)]
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;
This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Pali Rohár [Thu, 12 May 2022 09:59:39 +0000 (11:59 +0200)]
ARM: dts: turris-omnia: Add atsha204a node
Crypto module atsha204a is available at i2c address 0x64. Module is used
for symmetric cryptography and provides also hardware random number
generator and OTP storage for device serial number and MAC addresses.
Nícolas F. R. A. Prado [Wed, 4 May 2022 21:45:16 +0000 (17:45 -0400)]
arm64: dts: mt8192: Follow binding order for SCP registers
The dt-binding for SCP documents the reg-names order as sram, cfg,
l1tcm. Update the SCP node on the mt8192 devicetree to follow that
order, which gets rid of a dtbs_check warning. This doesn't change any
behavior since the SCP driver accesses the memory regions through the
names anyway.
Fixes: c63556ec6bfe ("arm64: dts: mt8192: Add SCP node") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220504214516.2957504-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
arm64: dts: mediatek: mt8183-pumpkin: fix bad thermistor node name
Fix the following dtbs_check error by using the correct node name:
/home/fabo/build/linux/mt8183-pumpkin/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dtb: ntc: $nodename:0: 'ntc' does not match '^thermistor(.*)?$'
From schema: /home/fabo/devel/baylibre/linux-mainline/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220426164755.435372-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
On an MT7622 system, the kernel complains of not being able to detect the cache
hierarchy of CPU 0. Specify the shared L2 cache node in the device tree, in
order to fix this.
arm64: dts: mt7622: specify the number of DMA requests
The MT7622 device tree never bothered to specify the number of virtual DMA
channels for the HSDMA controller, always falling back to the default value of
3. Make this value explicit, in order to avoid the following dmesg notification:
mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property
Arnd Bergmann [Fri, 13 May 2022 09:31:21 +0000 (11:31 +0200)]
Merge tag 'visconti-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti device tree updates for 5.19
- Update the clock providers for PCIe host controller
- Update the clock providers for ethernet device
- Update the clock providers for SPI
- Update the clock providers for watchdog timer
- Update the clock providers for I2C
- Update the clock providers for UART
- Add clock controller support for TMPV7708
* tag 'visconti-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: dts: visconti: Update the clock providers for PCIe host controller
arm64: dts: visconti: Update the clock providers for ethernet device
arm64: dts: visconti: Update the clock providers for SPI
arm64: dts: visconti: Update the clock providers for watchdog timer
arm64: dts: visconti: Update the clock providers for I2C
arm64: dts: visconti: Update the clock providers for UART
arm64: dts: visconti: Add clock controller support for TMPV7708
Arnd Bergmann [Fri, 13 May 2022 09:29:11 +0000 (11:29 +0200)]
Merge tag 'v5.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Naming and flag corrections.
* tag 'v5.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: rename pcfg_pull_default node name on rk3036
ARM: dts: rockchip: use generic node name for dma rk3036/rk322x
ARM: dts: rockchip: correct interrupt flags on rk3188 boards
Arnd Bergmann [Fri, 13 May 2022 09:28:40 +0000 (11:28 +0200)]
Merge tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New peripherals supported on rk356x: sfc, usb3, sata and
the video-decoder on rk3328.
RK3399 received some improvements and nodes for the memory controller.
Additional peripherals for PineNote, Gru and BananaPi-R2-Pro.
New boards are the Firefly Station M2, Pine64 SoQuartz SOM and
Quartz64 model B as well as the Radxa Rock3 model A.
* tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (32 commits)
arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x
arm64: dts: rockchip: rename HDMI ref clock to 'ref' on rk3399
arm64: dts: rockchip: add dts for Firefly Station M2 rk3566
arm64: dts: rockchip: add SoQuartz CM4IO dts
arm64: dts: rockchip: add Pine64 Quartz64-B device tree
dt-bindings: arm: rockchip: Add Firefly Station M2
dt-bindings: arm: rockchip: Add Pine64 SoQuartz SoM
dt-bindings: arm: rockchip: Add Pine64 Quartz64 Model B
arm64: dts: rockchip: enable usb hub on the radxa rock3 model a
arm64: dts: rockchip: add usb3 support to the radxa rock3 model a
arm64: dts: rockchip: add rk356x sfc support
arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote
arm64: dts: rockchip: Add accelerometer to rk3566-pinenote
arm64: dts: rockchip: add an input enable pinconf to rk3399
arm64: dts: rockchip: Add vdec support for RK3328
arm64: dts: rockchip: Rename vdec_mmu node for RK3328
arm64: dts: rockchip: Enable dmc and dfi nodes on gru
arm64: dts: rockchip: Add dfi and dmc nodes to rk3399
arm64: dts: rockchip: add clocks property to cru nodes rk3399
arm64: dts: rockchip: use generic node name for pmucru on rk3399
...
Arnd Bergmann [Mon, 9 May 2022 21:46:17 +0000 (23:46 +0200)]
Merge tag 'imx-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.19:
- New board support: Engicam i.Core MX8M Plus SoM and EDIMM2.2 Starter
Kit, Toradex Verdin i.MX8M Plus devices, Data Modul i.MX8M Mini eDM SBC,
Verdin based MX8Menlo, 8MNANOD3L EVK, i.MX8M Plus Gateworks GW7400.
- Enable RTS-CTS on UART3 for imx8mm-beacon and imx8mn-beacon boards.
- Enable HS400-ES support for i.MX8MN and i.MX8MP uSDHC devices by
updating the compatible.
- A few updates on imx8mq-librem5 to increase boost regulation
current, add panel compatible for r4 ("Evergreen") revision and volume
buttons a wakeup source.
- Clean up vendor specific 'fsl,uart-has-rtscts' property by using
standard 'uart-has-rtscts'.
- Add GPC, GPU, MEDIAMIX, and HSIO power domains for i.MX8M Plus SoC.
- A series from Marcel Ziswiler to improve imx8mm-verdin support,
including cosmetic changes and functional improvements like SD1 sleep
pinctrl and fully validated IOMUX configuration.
- Add PWM polarity inversion support for i.MX8 SoCs.
- A couple of changes from Michael Walle to update PMIC output names and
min/max voltages for imx8mn-evk board.
- A series from Tim Harvey to improve imx8mm-venice boards, add missing
uart-has-rtscts property to UARTs, clock-names to pcie_phy, and
vdd_5p0 ADC channel.
- Add VPU codec devices for i.MX8QXP SoC.
- Other small and random changes.
* tag 'imx-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (65 commits)
arm64: dt: imx8mp: support pwm polarity inversion
arm64: dt: imx8mn: support pwm polarity inversion
arm64: dt: imx8mm: support pwm polarity inversion
arm64: dt: imx8mq: support pwm polarity inversion
arm64: dts: imx8mm-venice-gw7901: remove unnecessary cpu temp override
arm64: dts: imx8mm-venice-gw7902: add vdd_5p0 ADC channel
arm64: dts: imx8m*venice: add missing clock-names to pcie_phy
arm64: dts: imx8mm-venice-gw7902: fix pcie bindings
arm64: dts: freescale: reduce the interrup-map-mask
arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3
arm64: dts: imx8mm: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC
arm64: dts: imx8mm: Disable USB2 OC on Data Modul i.MX8M Mini eDM SBC
arm64: dts: imx8mm: Add CPLD on MX8Menlo board
arm64: dts: imx8mq-kontron-pitx-imx8m: Use the standard 'uart-has-rtscts'
arm64: dts: imx8mp-verdin: Use the standard 'uart-has-rtscts'
arm64: dts: imx8mp: Add MEDIA_BLK_CTRL
arm64: dts: imx8mp: Add MEDIAMIX power domains
arm64: dts: imx8mp: add HSIO power-domains
arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
...
Arnd Bergmann [Mon, 9 May 2022 21:43:09 +0000 (23:43 +0200)]
Merge tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX ARM device tree update for 5.19:
- New board support: PHYTEC phyGATE-Tauri-S, TQ-Systems MBa6UL,
LS1021A IoT board, Toradex Iris and Aster carrier, i.MX7D SMEGW01,
i.MXRT1050 EVK, Bosch ACC board.
- A series from Alexander Stein to update i.MX51 based digi-connectcore
board, regarding to DMA of UART devices, PMIC voltages, USB
vbus-supply and usbphy.
- A series of changes from David Jander and Oleksij Rempel to remove
prototype specific deprecated code not used in production from
i.MX6Q/DL Vicut1 board, and unify Vicut1 and Victgo variants to reduce
maintaining overhead.
- Quite some changes from different people to update imx6ull-colibri board
on various aspects, touchscreen, device tree overlays, NAND BCH geometry,
GPIO line names, FEC phy-supply, etc.
- A couple of changes from Fabio Estevam to switch imx6dl-plybas and
imx6ul-kontron-n6x1x-s to use standard 'uart-has-rtscts' property.
- A couple of patches from Li Yang to update IFC device compatible and
node name for LayerScape SoCs.
- Disable USB host to work around boot issue on imx6qdl-udoo board.
- A series from Max Krummenacher to update Colibri i.MX6DL device trees,
drop dedicated v1.1 DT, disable add-on accessories, cleanups, etc.
- Various random and small updates on i.MX28 and i.MX6 boards.
* tag 'imx-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
ARM: dts: imx6ull-colibri: improve pinctrl node names
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
ARM: dts: imx6ull-colibri: add/update some comments
ARM: dts: imx6ull-colibri: fix nand bch geometry
ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
ARM: dts: imx6ull-colibri: add gpio-line-names
ARM: dts: imx6ull-colibri: update device trees to support overlays
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
ARM: dts: imx6ull-colibri: add touchscreen device nodes
ARM: dts: imx6ull-colibri: add phy-supply to fec
ARM: dts: imx6ull-colibri: change touch i2c parameters
ARM: dts: imx6ull-colibri: use pull-down for adc pins
ARM: dts: Add bosch acc board
ARM: dts: imx: Add i.MXRT1050-EVK support
ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board
ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues
ARM: dts: imx27: use new 'dma-channels' property
ARM: dts: imx6qdl-phytec: Add LED labels
ARM: dts: ls1021a: reduce the interrupt-map-mask
...
Arnd Bergmann [Mon, 9 May 2022 21:26:14 +0000 (23:26 +0200)]
Merge tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.19
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
* tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits)
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
arm64: dts: qcom: sc7280: eDP for herobrine boards
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller
arm64: dts: qcom: sm8350-duo2: enable battery charger
arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
arm64: dts: qcom: pm8350c: Add pwm support
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7180: Remove ipa interconnect node
arm64: dts: qcom: sc7280-idp: Enable GPI DMAs
arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels
arm64: dts: qcom: sc7280: Add GPI DMAengines
arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)
arm64: dts: qcom: db845c: Add support for MCP2517FD
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd
arm64: dts: qcom: sm8250: camss: Add CCI definitions
...
Arnd Bergmann [Mon, 9 May 2022 21:21:54 +0000 (23:21 +0200)]
Merge tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DT updates for v5.19
This contains a long overdue overhaul of the MSM8974 DeviceTrees,
aligning the style, structure and naming with what we've learned since
the introduction of this platform.
On top of this the Sony Rhine platform gained I2C masters, NFC and
pstore support and the Fairphone 2 gained touchscreen support.
For the new SDX65 platform reserved-memory nodes, rpmpd, SPMI, CPU
clocks, SDHCI controller, SMMU and TCSR mutex was added. As was the
initial DeviceTree for the related PMX65 PMIC.
MSM8226 gained VADC and RTC support and support for the ASUS ZenWatch 2
was added.
* tag 'qcom-dts-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
ARM: dts: qcom: msm8974-FP2: Add supplies for remoteprocs
ARM: dts: qcom: msm8974-FP2: Configure charger
ARM: dts: qcom: msm8974-FP2: Add support for touchscreen
ARM: dts: qcom: sdx55: Remove ipa interconnect node
ARM: dts: qcom: msm8974: Add missing license headers
ARM: dts: qcom: msm8974-FP2: Add mmc* aliases
ARM: dts: qcom: msm8974-FP2: We're msm8974pro
ARM: dts: qcom-msm8974*: Remove unnecessary include
ARM: dts: qcom-msm8974-rhine: Add pstore node
ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts
ARM: dts: qcom-msm8974*: Clean up old GPIO declarations
ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI
ARM: dts: qcom-msm8974*: Enable IMEM unconditionally
ARM: dts: qcom-msm8974: Sort and clean up nodes
ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device
ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames
ARM: dts: qcom-msm8974pro: Use &labels
ARM: dts: qcom-msm8974-castor: Use &labels
ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs
ARM: dts: qcom-msm8974-klte: Use &labels
...
Arnd Bergmann [Mon, 9 May 2022 12:32:56 +0000 (14:32 +0200)]
Merge tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.19:
- Various board compatible additions to fsl.yaml.
- Update fsl-imx-dma bindings to deprecate '#dma-channels' and
'#dma-requests'.
- Add bindings for i.MX8MP HDMI and media block control.
- Add vendor prefix for Storopack.
* tag 'imx-bindings-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add bosch acc board
dt-bindings: arm: fsl: Add Storopack i.MX7D SMEGW01 board
dt-bindings: vendor-prefixes: Add prefix for Storopack
dt-bindings: dmaengine: fsl-imx: deprecate '#dma-channels' and '#dma-requests'
dt-bindings: arm: fsl: add toradex,colibri-imx6ull
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
dt-bindings: arm: fsl: add ls1021a-iot board
dt-bindings: arm: Add i.MX8M Mini Toradex Verdin based Menlo board
dt-bindings: arm: Add i.MX8M Plus Gateworks GW74xx board
dt-bindings: arm: fsl: add IMX8MN DDR3L eval board
dt-bindings: arm: fsl: Add carriers for toradex,colibri-imx6dl
dt-bindings: arm: fsl: imx6dl-colibri: Drop dedicated v1.1 bindings
dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
dt-bindings: arm: Add i.MX53 based Menlo board comment
dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
dt-bindings: arm: fsl: add TQ Systems boards based on i.MX6UL(L)
dt-bindings: arm: Add Data Modul i.MX8M Mini eDM SBC
dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
Arnd Bergmann [Mon, 9 May 2022 12:19:13 +0000 (14:19 +0200)]
Merge tag 'ti-k3-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v5.19
New Features:
J721e:
* Enable DSS, DP, HDMI on J721e EVM and SK
AM62:
* MCAN, MCU GPIO, ECAP APWM, DMA, Etherent and several peripheral on AM62 SK EVM
AM64:
* Enable Wireless LAN support
Arnd Bergmann [Mon, 9 May 2022 12:12:12 +0000 (14:12 +0200)]
Merge tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
Keystone2 device tree updates for v5.19
* Cleanups for SPI NOR / flash
* tag 'ti-keystone-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
ARM: dts: keystone: Fix missing fallback and case in SPI NOR node compatible
ARM: dts: keystone: Align SPI NOR node name with dtschema
Robert Marko [Tue, 28 Sep 2021 17:09:19 +0000 (19:09 +0200)]
arm64: dts: marvell: espressobin-ultra: enable front USB3 port
Espressobin Ultra has a front panel USB3.0 Type-A port which works
just fine so enable it.
I dont see a reason why it was disabled in the first place anyway.
Fixes: 3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Robert Marko [Tue, 28 Sep 2021 17:09:18 +0000 (19:09 +0200)]
arm64: dts: marvell: espressobin-ultra: add PHY and switch reset pins
Both the Topaz switch and 88E1512 PHY have their reset and interrupts
connected to the SoC.
So, define the Topaz and 88E1512 reset pins in the DTS.
Defining the interrupt pins wont work as both the 88E1512 and the
Topaz switch uses active LOW IRQ signals but the A37xx GPIO controller
only supports edge triggers. 88E1512 would require special setup anyway as its INT pin is shared with
the LED2 and you first need to configure it as INT.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
SPI config for the SPI-NOR is incorrect and completely breaking
reading/writing to the onboard SPI-NOR.
SPI-NOR is connected in the single(x1) IO mode and not in the quad
(x4) mode.
Also, there is no need to override the max frequency from the DTSI
as the mx25u3235f that is used supports 104Mhz.
Fixes: 3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Robert Marko [Tue, 22 Mar 2022 10:58:57 +0000 (11:58 +0100)]
arm64: dts: uDPU: correct temperature sensors
uDPU has a pair of NCT375 temperature sensors, which are TMP75C compatible
as far as the driver is concerned.
The current LM75 compatible worked as all of the LM75 compatible sensors
are backwards compatible with the original part, but it meant that lower
resolution and incorrect sample rate was being used.
The "lm75" compatible has been deprecated anyway and is meant as fallback
in order to keep older DTS-es working.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Robert Marko [Tue, 22 Mar 2022 10:58:56 +0000 (11:58 +0100)]
arm64: dts: uDPU: update partition table
Partition currently called "uboot" does not only contain U-boot, but
rather it contains TF-A, U-boot and U-boot environment.
So, to avoid accidentally deleting the U-boot environment which is
located at 0x180000 split the partition.
"uboot" is not the correct name as you can't boot these boards with U-boot
only, TF-A must be present as well, so rename the "uboot" partition to
"firmware".
While we are here, describe the NOR node as "spi-flash@0" instead of
"m25p80@0" which is the old SPI-NOR driver name.
This won't break booting for existing devices as the SoC-s BootROM is not
partition aware at all, it will simply try booting from 0x0 of the
boot device that is set by bootstrap pins.
This will however prevent accidental or automated flashing of just U-boot
to the partition.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marcel Ziswiler [Fri, 6 May 2022 13:24:15 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
The gpio-keys define module level wake-up pin functionality. Move it
from the carrier board dts file to the Som dtsi file.
While at it, also re-order the properties in the gpio-keys node
alphabetically and rename to sub-node from power to wakeup.
Oleksandr Suvorov [Fri, 6 May 2022 13:24:10 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: add gpio-line-names
Add GPIO line names on module-level. Those are all GPIOs that a user
might use on his custom carrier board. If more meaningful names are
available on the carrier board, the user can overwrite the line names
in the carrier board-level device tree.
Philippe Schenker [Fri, 6 May 2022 13:24:08 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
Due to many carrier boards pulling the usdhc1 signals up to 3.3 volt we
need to disable 1.8 volt signaling. Adding the no-1-8-v property
basically disables UHS-I modes by default.
Also pull-up the command and data lines to the +V3.3_1.8_SD rail and
set them to the 200 MHz speed grade (e.g. pinmux bits 7-6: meaning 11
SPEED_3_max_200MHz).
Explicitly specify a bus-width of <4> in the module-level device tree
include file and drop the no-1-8-v property from the carrier boards
device trees.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move all Atmel nodes from the board-level into the main module-level
device tree and prepare the device trees for use with Atmel MXT device
tree overlays. Also, add required pinmux groups.
The common scheme for pin groups in touch screen overlays is as follows:
- pinctrl_atmel_conn - SODIMM 106/107 pins for INT/RST signals (default)
- pinctrl_atmel_adap - SODIMM 28/30 pins for INT/RST signals.
Philippe Schenker [Fri, 6 May 2022 13:24:06 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: add phy-supply to fec
This adds the proper phy-supply to the FEC. This supply is actually
switched by a clock that is now properly stated. This has the advantage
to add a delay for that particular regulator which is needed.
Philippe Schenker [Fri, 6 May 2022 13:24:04 +0000 (15:24 +0200)]
ARM: dts: imx6ull-colibri: use pull-down for adc pins
Disable the keeper and enable a 100k pull-down on the ADC pins as per
the following note in section 13.2 of the i.MX 6ULL Application
Processor Reference Manual, Rev. 1, 11/2017 [1]:
The keeper causes an undesired jump behavior in ADC. To avoid the
problem, disable keeper before starting ADC.
Arnd Bergmann [Fri, 6 May 2022 20:39:39 +0000 (22:39 +0200)]
Merge tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.19-rc1
This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.
* tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add missing DFLL reset on Tegra210
arm64: tegra: Add memory controller channels
arm64: tegra: Enable ASRC on various platforms
arm64: tegra: Add ASRC device on Tegra186 and later
arm64: tegra: Update PWM fan node name
arm64: tegra: Add node for Tegra234 CCPLEX cluster
arm64: tegra: Add QSPI controllers on Tegra234
arm64: tegra: Update SDMMC1/3 clock source for Tegra194
Arnd Bergmann [Fri, 6 May 2022 20:38:43 +0000 (22:38 +0200)]
Merge tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.19-rc1
Updates the memory controller bindings to properly validate the number
of entries in the reg and reg-names properties.
* tag 'tegra-for-5.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Update validation for reg and reg-names
Arnd Bergmann [Fri, 6 May 2022 20:36:15 +0000 (22:36 +0200)]
Merge tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.19 (take two)
- Document support for the R-Car V4H SoC and the White Hawk
development board stack,
- Document support for the RZ/V2M SoC and the RZ/V2M Evaluation Kit
Board,
- Document SPI Multi I/O Bus Controller (RPC-IF) support for RZ/G2UL,
- Miscellaneous fixes and improvements.
* tag 'renesas-dt-bindings-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Move renesas,rzg2l-sysc from arm to soc
dt-bindings: memory: renesas,rpc-if: Document RZ/G2UL SoC
dt-bindings: arm: renesas: Document Renesas RZ/V2M SoC and EVK board
dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings
dt-bindings: reset: renesas,rst: Document r8a779g0 reset module
dt-bindings: arm: renesas: Document R-Car V4H White Hawk DT bindings
Arnd Bergmann [Fri, 6 May 2022 20:30:58 +0000 (22:30 +0200)]
Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19 (take two)
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
ARM: dts: r9a06g032: Add USB PHY DT support
ARM: dts: r9a06g032: Add internal PCI bridge node
ARM: dts: r9a06g032: Describe the RTC
arm64: dts: renesas: Add interrupt-names to CANFD nodes
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g054: Fix external clk node names
arm64: dts: renesas: r9a07g044: Fix external clk node names
ARM: dts: r9a06g032: Fix the NAND controller node
ARM: dts: r9a06g032: Fill the UART DMA properties
ARM: dts: r9a06g032: Describe the DMA router
ARM: dts: r9a06g032: Add the two DMA nodes
arm64: dts: renesas: Remove empty rgb output endpoints
...
Arnd Bergmann [Fri, 6 May 2022 20:23:41 +0000 (22:23 +0200)]
Merge tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19, part two
Align SPI NOR node names to DT schema and drop unused/undocumented
dma-channels/dma-requests.
* tag 'dt-cleanup-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: drop useless 'dma-channels/requests' properties
ARM: dts: zynq-7000: drop useless 'dma-channels/requests' properties
ARM: dts: marvell: align SPI NOR node name with dtschema
ARM: dts: omap: align SPI NOR node name with dtschema
ARM: dts: nuvoton: align SPI NOR node name with dtschema
Arnd Bergmann [Fri, 6 May 2022 20:12:37 +0000 (22:12 +0200)]
Merge tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM64 DTS for v5.19
Align SPI NOR node names and freq-table-hz to DT schema. Drop
unused/undocumented dma-channels/dma-requests.
* tag 'dt64-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: broadcom: drop useless 'dma-channels/requests' properties
arm64: dts: stratix10/agilex: drop useless 'dma-channels/requests' properties
arm64: dts: marvell: align SPI NOR node name with dtschema
arm64: dts: microchip: align SPI NOR node name with dtschema
arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS
Giulio Benetti [Tue, 11 Jan 2022 21:54:14 +0000 (16:54 -0500)]
ARM: dts: imx: Add i.MXRT1050-EVK support
The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 core.
The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
USB 2.0 OTG.
This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC
Phil Edworthy [Wed, 4 May 2022 09:44:56 +0000 (10:44 +0100)]
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
Details of the SoC can be found here:
https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-cortex-a-mpus/rzv2m-dual-cortex-a53-lpddr4x32bit-ai-accelerator-isp-4k-video-codec-4k-camera-input-fhd-display-output
Geert Uytterhoeven [Mon, 2 May 2022 13:35:17 +0000 (15:35 +0200)]
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence update the compatible properties in various device nodes
to include family-specific compatible values for R-Car Gen4 instead of
R-Car Gen3:
- DMAC,
- (H)SCIF,
- I2C,
- IPMMU,
- WDT.
Geert Uytterhoeven [Mon, 2 May 2022 17:33:52 +0000 (19:33 +0200)]
arm64: dts: renesas: Add interrupt-names to CANFD nodes
The Renesas R-Car CAN-FD Controller on R-Car Gen3 and RZ/G2 SoCs has two
interrupts. Add interrupt-names properties to all CAN-FD device nodes
to identify the individual interrupts, so we can make this property a
required property in the DT bindings.
Biju Das [Sun, 1 May 2022 11:29:25 +0000 (12:29 +0100)]
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
Setup a thermal zone driven by SoC temperature sensor.
Create passive trip points and bind them to CPUFreq cooling
device that supports power extension.
Based on the work done by Dien Pham <dien.pham.ry@renesas.com>
and others for r8a77990 SoC.
Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.
Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with audio{1,2}-clk as per the device
tree specification.
projects / linux.git / log