Merge tag 'for-linus-6.5a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for a performance problem in QubesOS, adding a way to drain the
queue of grants experiencing delayed unmaps faster
- A patch enabling the use of static event channels from user mode,
which was omitted when introducing supporting static event channels
- A fix for a problem where Xen related code didn't check properly for
running in a Xen environment, resulting in a WARN splat
* tag 'for-linus-6.5a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: speed up grant-table reclaim
xen/evtchn: Introduce new IOCTL to bind static evtchn
xenbus: check xen_domain in xenbus_probe_initcall
Merge tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to reduce the potential for erroneous RBD exclusive lock
blocklisting (fencing) with a couple of prerequisites and a fixup to
prevent metrics from being sent to the MDS even just once after that
has been disabled by the user. All marked for stable"
* tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client:
rbd: retrieve and check lock owner twice before blocklisting
rbd: harden get_lock_owner_info() a bit
rbd: make get_lock_owner_info() return a single locker or NULL
ceph: never send metrics if disable_send_metrics is set
Merge tag '9p-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"Misc set of fixes for 9p.
Most of these clean up warnings we've gotten out of compilation tools,
but several of them were from inspection while hunting down a couple
of regressions.
The most important one is 75b396821cb7 ("fs/9p: remove unnecessary and
overrestrictive check") which caused a regression for some folks by
restricting mmap in any case where writeback caches weren't enabled.
Most of the other bugs caught via inspection were type mismatches"
* tag '9p-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Remove unused extern declaration
9p: remove dead stores (variable set again without being read)
9p: virtio: skip incrementing unused variable
9p: virtio: make sure 'offs' is initialized in zc_request
9p: virtio: fix unlikely null pointer deref in handle_rerror
9p: fix ignored return value in v9fs_dir_release
fs/9p: remove unnecessary invalidate_inode_pages2
fs/9p: fix type mismatch in file cache mode helper
fs/9p: fix typo in comparison logic for cache mode
fs/9p: remove unnecessary and overrestrictive check
fs/9p: Fix a datatype used with V9FS_DIRECT_IO
Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A few fixes that should go into the current kernel release, mainly:
- Set of fixes for dasd (Stefan)
- Handle interruptible waits returning because of a signal for ublk
(Ming)"
* tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux:
ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV
ublk: fail to recover device if queue setup is interrupted
ublk: fail to start device if queue setup is interrupted
block: Fix a source code comment in include/uapi/linux/blkzoned.h
s390/dasd: print copy pair message only for the correct error
s390/dasd: fix hanging device after request requeue
s390/dasd: use correct number of retries for ERP requests
s390/dasd: fix hanging device after quiesce/resume
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two user triggerable problems:
- Syzkaller found a way to trigger a WARN_ON and leak memory by
racing destroy with other actions
- There is still a bug in the "batch carry" stuff that gets invoked
for complex cases with accesses and unmapping of huge pages. The
test suite found this (triggers rarely)"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Set end correctly when doing batch carry
iommufd: IOMMUFD_DESTROY should not increase the refcount
Merge tag 'sound-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific small fixes such as ASoC Realtek codec
fixes for PM issues, ASoC nau8821 quirk additions, and usual HD- and
USB-audio quirks"
* tag 'sound-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Support ASUS G713PV laptop
ALSA: usb-audio: Update for native DSD support quirks
ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset
ALSA: hda/relatek: Enable Mute LED on HP 250 G8
ASoC: atmel: Fix the 8K sample parameter in I2SC master
ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0
ASoC: rt711: fix for JD event handling in ClockStop Mode0
ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0
ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0
ASoc: codecs: ES8316: Fix DMIC config
ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0
ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register
ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect
ASoC: da7219: Check for failure reading AAD IRQ events
ASoC: da7219: Flush pending AAD IRQ when suspending
ALSA: seq: remove redundant unsigned comparison to zero
ASoC: fsl_spdif: Silence output on stop
i915:
- Use shmem for dpt objects
- Fix an error handling path in igt_write_huge()
msm:
- display:
- Fix to correct the UBWC programming for decoder version 4.3 seen
on SM8550
- Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs.
- Fix to drop the unused dpu_core_perf_data_bus_id enum from the
code
- Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI
cfg.
- gpu:
- Fix warn splat for newer devices without revn
- Remove name/revn for a690.. we shouldn't be populating these for
newer devices, for consistency, but it slipped through review
- Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes
instead of dwords, causing AHB faults on a6xx gen4/a660-family)
- Disallow submit with fence id 0"
* tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/msm: Disallow submit with fence id 0
drm/amdgpu: Restore HQD persistent state register
drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event()
drm/amd/display: Exit idle optimizations before attempt to access PHY
drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0
drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family
drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock
drm/amd: Fix an error handling mistake in psp_sw_init()
drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)
drm/amdkfd: fix trap handling work around for debugging
drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init()
drm/i915: Fix an error handling path in igt_write_huge()
drm/i915/dpt: Use shmem for dpt objects
drm/msm: Fix hw_fence error path cleanup
drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()
drm/msm/adreno: Fix snapshot BINDLESS_DATA size
drm/msm/a690: Remove revn and name
drm/msm/adreno: Fix warn splat for devices without revn
drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
drm/msm/dpu: drop enum dpu_core_perf_data_bus_id
...
kbuild reports a warning in memblock_remove_region() because of a false
positive caused by partial reset of the memblock state.
Doing the full reset will remove the false positives, but will allow
late use of memblock_free() to go unnoticed, so it is better to revert
the offending commit.
mm/mempolicy: Take VMA lock before replacing policy
mbind() calls down into vma_replace_policy() without taking the per-VMA
locks, replaces the VMA's vma->vm_policy pointer, and frees the old
policy. That's bad; a concurrent page fault might still be using the
old policy (in vma_alloc_folio()), resulting in use-after-free.
Normally this will manifest as a use-after-free read first, but it can
result in memory corruption, including because vma_alloc_folio() can
call mpol_cond_put() on the freed policy, which conditionally changes
the policy's refcount member.
This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA
systems as long as the kernel was built with CONFIG_NUMA.
Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it") Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 28 Jul 2023 01:59:14 +0000 (11:59 +1000)]
Merge tag 'drm-msm-fixes-2023-07-27' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.5-rc4
Display:
+ Fix to correct the UBWC programming for decoder version 4.3 seen
on SM8550
+ Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs.
+ Fix to drop the unused dpu_core_perf_data_bus_id enum from the code
+ Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg.
GPU:
+ Fix warn splat for newer devices without revn
+ Remove name/revn for a690.. we shouldn't be populating these for
newer devices, for consistency, but it slipped through review
+ Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes
instead of dwords, causing AHB faults on a6xx gen4/a660-family)
+ Disallow submit with fence id 0
Merge tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
Merge tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Core fix for enumeration completion
- Qualcomm driver fix to update status
- AMD driver fix for probe error check
* tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Fix a check for errors in probe()
soundwire: qcom: update status correctly with mask
soundwire: fix enumeration completion
Merge tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
* tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
phy: qcom-snps-femto-v2: properly enable ref clock
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test
phy: phy-mtk-dp: Fix an error code in probe()
Merge tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix accounting of global block reserve size when block group tree is
enabled
- the async discard has been enabled in 6.2 unconditionally, but for
zoned mode it does not make that much sense to do it asynchronously
as the zones are reset as needed
- error handling and proper error value propagation fixes
* tag 'for-6.5-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check for commit error at btrfs_attach_transaction_barrier()
btrfs: check if the transaction was aborted at btrfs_wait_for_commit()
btrfs: remove BUG_ON()'s in add_new_free_space()
btrfs: account block group tree when calculating global reserve size
btrfs: zoned: do not enable async discard
Merge tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"A call to memblock_free() or memblock_phys_free() issued after
memblock data is discarded will result in use after free in
memblock_isolate_range().
Avoid those issues by making sure that memblock_discard points
memblock.reserved.regions back at the static buffer"
* tag 'fixes-2023-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm,memblock: reset memblock.reserved to system init state to prevent UAF
mm: lock_vma_under_rcu() must check vma->anon_vma under vma lock
lock_vma_under_rcu() tries to guarantee that __anon_vma_prepare() can't
be called in the VMA-locked page fault path by ensuring that
vma->anon_vma is set.
However, this check happens before the VMA is locked, which means a
concurrent move_vma() can concurrently call unlink_anon_vmas(), which
disassociates the VMA's anon_vma.
This means we can get UAF in the following scenario:
This is a security bug if you can hit it, although an attacker would
have to win two races at once where the first race window is only a few
instructions wide.
This patch is based on some previous discussion with Linus Torvalds on
the security list.
Cc: stable@vger.kernel.org Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Gunthorpe [Tue, 25 Jul 2023 19:05:49 +0000 (16:05 -0300)]
iommufd: IOMMUFD_DESTROY should not increase the refcount
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles") Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Ming Lei [Wed, 26 Jul 2023 14:45:01 +0000 (22:45 +0800)]
ublk: fail to recover device if queue setup is interrupted
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support") Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Wed, 26 Jul 2023 14:45:00 +0000 (22:45 +0800)]
ublk: fail to start device if queue setup is interrupted
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reported-by: German Maglione <gmaglione@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'asoc-fix-v6.5-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A collection of device specific fixes, none particularly remarkable.
There's a set of repetitive fixes for the RealTek drivers fixing an
issue with suspend that was replicated in multiple drivers.
tipc: stop tipc crypto on failure in tipc_node_create
If tipc_link_bc_create() fails inside tipc_node_create() for a newly
allocated tipc node then we should stop its tipc crypto and free the
resources allocated with a call to tipc_crypto_start().
As the node ref is initialized to one to that point, just put the ref on
tipc_link_bc_create() error case that would lead to tipc_node_free() be
eventually executed and properly clean the node and its crypto resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: cb8092d70a6f ("tipc: move bc link creation back to tipc_node_create") Suggested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230725214628.25246-1-pchelkin@ispras.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
af_unix: Terminate sun_path when bind()ing pathname socket.
kernel test robot reported slab-out-of-bounds access in strlen(). [0]
Commit 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
removed unix_mkname_bsd() call in unix_bind_bsd().
If sunaddr->sun_path is not terminated by user and we don't enable
CONFIG_INIT_STACK_ALL_ZERO=y, strlen() will do the out-of-bounds access
during file creation.
Let's go back to strlen()-with-sockaddr_storage way and pack all 108
trickiness into unix_mkname_bsd() with bold comments.
[0]:
BUG: KASAN: slab-out-of-bounds in strlen (lib/string.c:?)
Read of size 1 at addr ffff000015492777 by task fortify_strlen_/168
The buggy address belongs to the object at ffff000015492700
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 0 bytes to the right of
allocated 119-byte region [ffff000015492700, ffff000015492777)
Memory state around the buggy address: ffff000015492600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000015492680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff000015492700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 fc
^ ffff000015492780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff000015492800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/netdev/202307262110.659e5e8-oliver.sang@intel.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230726190828.47874-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list. Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first. However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first. As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.
To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable. The default is still
10, but it can be overridden via a module parameter.
This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.
Jakub Kicinski [Thu, 27 Jul 2023 05:18:00 +0000 (22:18 -0700)]
Merge tag 'nf-23-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter fixes for net
1. On-demand overlap detection in 'rbtree' set can cause memory leaks.
This is broken since 6.2.
2. An earlier fix in 6.4 to address an imbalance in refcounts during
transaction error unwinding was incomplete, from Pablo Neira.
3. Disallow adding a rule to a deleted chain, also from Pablo.
Broken since 5.9.
* tag 'nf-23-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
====================
Jason Wang [Tue, 25 Jul 2023 07:20:49 +0000 (03:20 -0400)]
virtio-net: fix race between set queues and probe
A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.
Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lin Ma [Tue, 25 Jul 2023 02:42:27 +0000 (10:42 +0800)]
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
The nla_for_each_nested parsing in function mqprio_parse_nlattr() does
not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as 8 byte integer and passed to priv->max_rate/min_rate.
This patch adds the check based on nla_len() when check the nla_type(),
which ensures that the length of these two attribute must equals
sizeof(u64).
Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio") Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20230725024227.426561-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jan Stancek [Mon, 24 Jul 2023 17:39:04 +0000 (19:39 +0200)]
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
LTP sendfile07 [1], which expects sendfile() to return EAGAIN when
transferring data from regular file to a "full" O_NONBLOCK socket,
started failing after commit 2dc334f1a63a ("splice, net: Use
sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()").
sendfile() no longer immediately returns, but now blocks.
Removed sock_sendpage() handled this case by setting a MSG_DONTWAIT
flag, fix new splice_to_socket() to do the same for O_NONBLOCK sockets.
net: fec: tx processing does not call XDP APIs if budget is 0
According to the clarification [1] in the latest napi.rst, the tx
processing cannot call any XDP (or page pool) APIs if the "budget"
is 0. Because NAPI is called with the budget of 0 (such as netpoll)
indicates we may be in an IRQ context, however, we cannot use the
page pool from IRQ context.
Paolo Abeni [Tue, 25 Jul 2023 18:34:56 +0000 (11:34 -0700)]
mptcp: more accurate NL event generation
Currently the mptcp code generate a "new listener" event even
if the actual listen() syscall fails. Address the issue moving
the event generation call under the successful branch.
Cc: stable@vger.kernel.org Fixes: f8c9dfbd875b ("mptcp: add pm listener events") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-2-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mptcp: join: only check for ip6tables if needed
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.
Cc: stable@vger.kernel.org Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When attribute is enum type and marked as multi-attr, the netlink
respond is not parsed, fails with stack trace:
Traceback (most recent call last):
File "/net-next/tools/net/ynl/./test.py", line 520, in <module>
main()
File "/net-next/tools/net/ynl/./test.py", line 488, in main
dplls=dplls_get(282574471561216)
File "/net-next/tools/net/ynl/./test.py", line 48, in dplls_get
reply=act(args)
File "/net-next/tools/net/ynl/./test.py", line 41, in act
reply = ynl.dump(args.dump, attrs)
File "/net-next/tools/net/ynl/lib/ynl.py", line 598, in dump
return self._op(method, vals, dump=True)
File "/net-next/tools/net/ynl/lib/ynl.py", line 584, in _op
rsp_msg = self._decode(gm.raw_attrs, op.attr_set.name)
File "/net-next/tools/net/ynl/lib/ynl.py", line 451, in _decode
self._decode_enum(rsp, attr_spec)
File "/net-next/tools/net/ynl/lib/ynl.py", line 408, in _decode_enum
value = enum.entries_by_val[raw].name
TypeError: unhashable type: 'list'
error: 1
Redesign _decode_enum(..) to take a enum int value and translate
it to either a bitmask or enum name as expected.
tools: ynl-gen: fix enum index in _decode_enum(..)
Remove wrong index adjustment, which is leftover from adding
support for sparse enums.
enum.entries_by_val() function shall not subtract the start-value, as
it is indexed with real enum value.
Fixes: c311aaa74ca1 ("tools: ynl: fix enum-as-flags in the generic CLI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230725101642.267248-2-arkadiusz.kubalewski@intel.com Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: huawei-wmi: Silence ambient light sensor
platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100
platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops
platform/x86: think-lmi: Use kfree_sensitive instead of kfree
platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks
platform/x86: intel: hid: Always call BTNL ACPI method
platform/x86/amd/pmf: Notify OS power slider update
platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params
platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551
platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed()
platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
Merge tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- fixes for two possible out of bounds access (in negotiate, and in
decrypt msg)
- fix unsigned compared to zero warning
- fix path lookup crossing a mountpoint
- fix case when first compound request is a tree connect
- fix memory leak if reads are compounded
* tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix out of bounds in init_smb2_rsp_hdr()
ksmbd: no response from compound read
ksmbd: validate session id and tree id in compound request
ksmbd: fix out of bounds in smb3_decrypt_req()
ksmbd: check if a mount point is crossed during path lookup
ksmbd: Fix unsigned expression compared with zero
mm: suppress mm fault logging if fatal signal already pending
Commit eda0047296a1 ("mm: make the page fault mmap locking killable")
intentionally made it much easier to trigger the "page fault fails
because a fatal signal is pending" situation, by having the mmap locking
fail early in that case.
We have long aborted page faults in other fatal cases when the actual IO
for a page is interrupted by SIGKILL - which is particularly useful for
the traditional case of NFS hanging due to network issues, but local
filesystems could cause it too if you happened to get the SIGKILL while
waiting for a page to be faulted in (eg lock_folio_maybe_drop_mmap()).
So aborting the page fault wasn't a new condition - but it now triggers
earlier, before we even get to 'handle_mm_fault()'. And as a result the
error doesn't go through our 'fault_signal_pending()' logic, and doesn't
get filtered away there.
Normally you'd never even notice, because if a fatal signal is pending,
the new SIGSEGV we send ends up being ignored anyway.
But it turns out that there is one very noticeable exception: if you
enable 'show_unhandled_signals', the aborted page fault will be logged
in the kernel messages, and you'll get a scary line looking something
like this in your logs:
which is rather misleading. It's not really a segfault at all, it's
just "the thread was killed before the page fault completed, so we
aborted the page fault".
Fix this by just making it clear that a pending fatal signal means that
any new signal coming in after that is implicitly handled. This will
avoid the misleading logging, since now the signal isn't 'unhandled' any
more.
Reported-and-tested-by: Fiona Ebner <f.ebner@proxmox.com> Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Link: https://lore.kernel.org/lkml/8d063a26-43f5-0bb7-3203-c6a04dc159f8@proxmox.com/ Acked-by: Oleg Nesterov <oleg@redhat.com> Fixes: eda0047296a1 ("mm: make the page fault mmap locking killable") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rob Clark [Mon, 24 Jul 2023 20:30:21 +0000 (13:30 -0700)]
drm/msm: Disallow submit with fence id 0
A fence id of zero is expected to be invalid, and is not removed from
the fence_idr table. If userspace is requesting to specify the fence
id with the FENCE_SN_IN flag, we need to reject a zero fence id value.
Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549180/
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
Bail out with EOPNOTSUPP when adding rule to bound chain via
NFTA_RULE_CHAIN_ID. The following warning splat is shown when
adding a rule to a deleted bound chain:
netfilter: nft_set_rbtree: fix overlap expiration walk
The lazy gc on insert that should remove timed-out entries fails to release
the other half of the interval, if any.
Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0
in nftables.git and kmemleak enabled kernel.
Second bug is the use of rbe_prev vs. prev pointer.
If rbe_prev() returns NULL after at least one iteration, rbe_prev points
to element that is not an end interval, hence it should not be removed.
Lastly, check the genmask of the end interval if this is active in the
current generation.
Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de>
rbd: retrieve and check lock owner twice before blocklisting
An attempt to acquire exclusive lock can race with the current lock
owner closing the image:
1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted
Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).
To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0. If it's still there, make
sure it matches the previously detected lock owner.
Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
invalid handles
- bail if locker has a blank address
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Ilya Dryomov [Fri, 30 Jun 2023 11:52:13 +0000 (13:52 +0200)]
rbd: make get_lock_owner_info() return a single locker or NULL
Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Filipe Manana [Fri, 21 Jul 2023 09:49:21 +0000 (10:49 +0100)]
btrfs: check for commit error at btrfs_attach_transaction_barrier()
btrfs_attach_transaction_barrier() is used to get a handle pointing to the
current running transaction if the transaction has not started its commit
yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit
has started, then we wait for the transaction to commit and finish before
returning - however we completely ignore if the transaction was aborted
due to some error during its commit, we simply return ERR_PT(-ENOENT),
which makes the caller assume everything is fine and no errors happened.
This could make an fsync return success (0) to user space when in fact we
had a transaction abort and the target inode changes were therefore not
persisted.
Fix this by checking for the return value from btrfs_wait_for_commit(),
and if it returned an error, return it back to the caller.
Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
igc: Fix Kernel Panic during ndo_tx_timeout callback
The Xeon validation group has been carrying out some loaded tests
with various HW configurations, and they have seen some transmit
queue time out happening during the test. This will cause the
reset adapter function to be called by igc_tx_timeout().
Similar race conditions may arise when the interface is being brought
down and up in igc_reinit_locked(), an interrupt being generated, and
igc_clean_tx_irq() being called to complete the TX.
When the igc_tx_timeout() function is invoked, this patch will turn
off all TX ring HW queues during igc_down() process. TX ring HW queues
will be activated again during the igc_configure_tx_ring() process
when performing the igc_up() procedure later.
This patch also moved existing igc_disable_tx_ring_hw() to avoid using
forward declaration.
Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Mon, 24 Jul 2023 03:25:31 +0000 (05:25 +0200)]
net: dsa: qca8k: fix mdb add/del case with 0 VID
The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.
Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Mon, 24 Jul 2023 03:25:30 +0000 (05:25 +0200)]
net: dsa: qca8k: fix broken search_and_del
On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)
We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.
Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.
Fix this by correctly read the fdb entry after it was searched.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Mon, 24 Jul 2023 03:25:29 +0000 (05:25 +0200)]
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.
A FDB entry can't be modified so it needs to be removed and insert again
with the new values.
To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.
Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
STATIC value resulting in allocating an invalid entry.
Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.
Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Mon, 24 Jul 2023 03:25:28 +0000 (05:25 +0200)]
net: dsa: qca8k: enable use_single_write for qca8xxx
The qca8xxx switch supports 2 way to write reg values, a slow way using
mdio and a fast way by sending specially crafted mgmt packet to
read/write reg.
The fast way can support up to 32 bytes of data as eth packet are used
to send/receive.
This correctly works for almost the entire regmap of the switch but with
the use of some kernel selftests for dsa drivers it was found a funny
and interesting hw defect/limitation.
For some specific reg, bulk write won't work and will result in writing
only part of the requested regs resulting in half data written. This was
especially hard to track and discover due to the total strangeness of
the problem and also by the specific regs where this occurs.
This occurs in the specific regs of the ATU table, where multiple entry
needs to be written to compose the entire entry.
It was discovered that with a bulk write of 12 bytes on
QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
were written, but QCA8K_REG_ATU_DATA1 was always zero.
Tcpdump was used to make sure the specially crafted packet was correct
and this was confirmed.
The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
resulted in an entry somehow possible as the first bytes of the mac
address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
QCA8K_REG_ATU_DATA2.
Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
QCA8K_REG_ATU_FUNC correctly written.
A speculation on the problem might be that there are some kind of
indirection internally when accessing these regs and they can't be
accessed all together, due to the fact that it's really a table mapped
somewhere in the switch SRAM.
Even more funny is the fact that every other reg was tested with all
kind of combination and they are not affected by this problem. Read
operation was also tested and always worked so it's not affected by this
problem.
The problem is not present if we limit writing a single reg at times.
To handle this hardware defect, enable use_single_write so that bulk
api can correctly split the write in multiple different operation
effectively reverting to a non-bulk write.
Cc: Mark Brown <broonie@kernel.org> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
xen/evtchn: Introduce new IOCTL to bind static evtchn
Xen 4.17 supports the creation of static evtchns. To allow user space
application to bind static evtchns introduce new ioctl
"IOCTL_EVTCHN_BIND_STATIC". Existing IOCTL doing more than binding
that’s why we need to introduce the new IOCTL to only bind the static
event channels.
Static evtchns to be available for use during the lifetime of the
guest. When the application exits, __unbind_from_irq() ends up being
called from release() file operations because of that static evtchns
are getting closed. To avoid closing the static event channel, add the
new bool variable "is_static" in "struct irq_info" to mark the event
channel static when creating the event channel to avoid closing the
static evtchn.
Also, take this opportunity to remove the open-coded version of the
evtchn close in drivers/xen/evtchn.c file and use xen_evtchn_close().
Alex Elder [Mon, 24 Jul 2023 22:40:55 +0000 (17:40 -0500)]
net: ipa: only reset hashed tables when supported
Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel. Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.
Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock. The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity. Unused transactions are not normally
expected (except in error cases).
The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges. In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries. If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction. Something similar occurs when we zero routing table
entries for the modem.
By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.
Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors). This patch addresses
only the underflows that Google originally reported.
Cc: <stable@vger.kernel.org> # 6.1.x Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists") Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: Fix error/warning by -fstrict-flex-arrays=3.
df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") started applying
strict rules for standard string functions (strlen(), memcpy(), etc.) if
CONFIG_FORTIFY_SOURCE=y.
This series fixes two false positives caught by syzkaller.
af_packet: Fix warning of fortified memcpy() in packet_getname().
syzkaller found a warning in packet_getname() [0], where we try to
copy 16 bytes to sockaddr_ll.sll_addr[8].
Some devices (ip6gre, vti6, ip6tnl) have 16 bytes address expressed
by struct in6_addr. Also, Infiniband has 32 bytes as MAX_ADDR_LEN.
The write seems to overflow, but actually not since we use struct
sockaddr_storage defined in __sys_getsockname() and its size is 128
(_K_SS_MAXSIZE) bytes. Thus, we have sufficient room after sll_addr[]
as __data[].
To avoid the warning, let's add a flex array member union-ed with
sll_addr.
Another option would be to use strncpy() and limit the copied length
to sizeof(sll_addr), but it will return the partial address and break
an application that passes sockaddr_storage to getsockname().
syzkaller found a bug in unix_bind_bsd() [0]. We can reproduce it
by bind()ing a socket on a path with length 108.
108 is the size of sun_addr of struct sockaddr_un and is the maximum
valid length for the pathname socket. When calling bind(), we use
struct sockaddr_storage as the actual buffer size, so terminating
sun_addr[108] with null is legitimate as done in unix_mkname_bsd().
However, strlen(sunaddr) for such a case causes fortify_panic() if
CONFIG_FORTIFY_SOURCE=y. __fortify_strlen() has no idea about the
actual buffer size and see the string as unterminated.
Let's use strnlen() to allow sun_addr to be unterminated at 107.
Lin Ma [Sun, 23 Jul 2023 08:02:05 +0000 (16:02 +0800)]
macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for
broadcast cutoff") added one additional attribute named
IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.
However, it forgot to describe the nla_policy at macvlan_policy
(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer
can be faked as empty (0 bytes) by a malicious user, which could leads
to OOB in heap just like CVE-2023-3773.
To fix it, this commit just completes the nla_policy description for
IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the
potential OOB read.
Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Snowberg [Tue, 25 Jul 2023 21:56:46 +0000 (17:56 -0400)]
ovl: Always reevaluate the file signature for IMA
Commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
partially closed an IMA integrity issue when directly modifying a file
on the lower filesystem. If the overlay file is first opened by a user
and later the lower backing file is modified by root, but the extended
attribute is NOT updated, the signature validation succeeds with the old
original signature.
Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to
force signature reevaluation on every file access until a fine grained
solution can be found.
x86/traps: Fix load_unaligned_zeropad() handling for shared TDX memory
Commit c4e34dd99f2e ("x86: simplify load_unaligned_zeropad()
implementation") changes how exceptions around load_unaligned_zeropad()
handled. The kernel now uses the fault_address in fixup_exception() to
verify the address calculations for the load_unaligned_zeropad().
It works fine for #PF, but breaks on #VE since no fault address is
passed down to fixup_exception().
Propagating ve_info.gla down to fixup_exception() resolves the issue.
See commit 1e7769653b06 ("x86/tdx: Handle load_unaligned_zeropad()
page-cross to a shared page") for more context.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Michael Kelley <mikelley@microsoft.com> Fixes: c4e34dd99f2e ("x86: simplify load_unaligned_zeropad() implementation") Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On GFX v9.4.3, compute queue MQD is populated using the values in HQD
persistent state register. Hence don't clear the values on module
unload, instead restore it to the default reset value so that MQD is
initialized correctly during next module load. In particular, preload
flag needs to be set on compute queue MQD, otherwise it could cause
uninitialized values being used at device reset state resulting in EDC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Wed, 12 Jul 2023 20:50:15 +0000 (16:50 -0400)]
drm/amd/display: Exit idle optimizations before attempt to access PHY
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 12 Jul 2023 21:22:25 +0000 (17:22 -0400)]
drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 11 Jul 2023 17:22:36 +0000 (13:22 -0400)]
drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Thu, 13 Jul 2023 05:14:59 +0000 (00:14 -0500)]
drm/amd: Fix an error handling mistake in psp_sw_init()
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Tue, 18 Jul 2023 18:31:58 +0000 (14:31 -0400)]
drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)
An instance of for_each_inst() was not changed to match its new
behaviour and is causing a loop.
v2: remove tmp_mask variable
Fixes: b579ea632fca ("drm/amdgpu: Modify for_each_inst macro") Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 12 Jul 2023 20:32:29 +0000 (16:32 -0400)]
drm/amdkfd: fix trap handling work around for debugging
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Acked-by: Ruili Ji <ruili.ji@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()
Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).
Reported-by: David Jeffery <djeffery@redhat.com> Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
__md_stop_writes() and __md_stop() will modify many fields that are
protected by 'reconfig_mutex', and all the callers will grab
'reconfig_mutex' except for md_stop().
Also, update md_stop() to make certain 'reconfig_mutex' is held using
lockdep_assert_held().
dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths
In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm integrity: fix double free on memory allocation failure
If the statement "recalc_tags = kvmalloc(recalc_tags_size, GFP_NOIO);"
fails, we call "vfree(recalc_buffer)" and we jump to the label "oom".
If the condition "recalc_sectors >= 1U << ic->sb->log2_sectors_per_block"
is false, we jump to the label "free_ret" and call "vfree(recalc_buffer)"
again, on an already released memory block.
Fix the bug by setting "recalc_buffer = NULL" after freeing it.
Fixes: da8b4fc1f63a ("dm integrity: only allocate recalculate buffer when needed") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
regardless of ec_read_only.
2. The initial SW state corresponds to the actual state on boot, but it
can't be changed afterwards, because set_device_state returns
-EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
unusable if it was blocked on boot, and breaking the airplane mode if
the rfkill was unblocked on boot.
Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.
Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.
Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one") Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Kristian Angelov [Thu, 20 Jul 2023 15:29:50 +0000 (18:29 +0300)]
platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops
This patch fixes setting the cmd values to 0xb3 and 0xb4.
This is necessary on some TUF laptops in order to set the RGB mode.
Closes: https://lore.kernel.org/platform-driver-x86/443078148.491022.1677576298133@nm83.abv.bg Signed-off-by: Kristian Angelov <kristiana2000@abv.bg> Reviewed-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/ZLlS7o6UdTUBkyqa@wyvern.localdomain Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
Shyam Sundar S K [Fri, 14 Jul 2023 14:44:35 +0000 (20:14 +0530)]
platform/x86/amd/pmf: Notify OS power slider update
APMF fn8 can notify EC about the OS slider position change. Add this
capability to the PMF driver so that it can call the APMF fn8 based on
the changes in the Platform profile events.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Shyam Sundar S K [Fri, 14 Jul 2023 14:44:34 +0000 (20:14 +0530)]
platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params
apmf_get_system_params() failure is not a critical event, reduce its
verbosity from dev_err to dev_dbg.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft
USB Link") has a playback and a capture mixer volume/switch, but they
are fairly broken. The descriptor reports wrong dB ranges for
playback, and the capture volume/switch don't influence on the actual
recording at all. Moreover, there seem instabilities in the
connection, and at best, we should disable the runtime PM.
So this ended up with a quirk entry for:
- Correct the playback dB range;
I picked up some reasonable values but it's a guess work
- Disable the capture mixer;
it's completely useless and confuses PA/PW
- Suppress get-sample-rate, apply the delay for message handling,
and suppress the auto-suspend
The behavior of the wheel control on the headset is somehow flaky,
too, but it's an issue of HID.
ASoC: atmel: Fix the 8K sample parameter in I2SC master
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Shuming Fan [Fri, 21 Jul 2023 09:07:11 +0000 (17:07 +0800)]
ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
projects / users / dwmw2 / linux.git / log