Manivannan Sadhasivam [Wed, 28 Aug 2024 15:46:22 +0000 (21:16 +0530)]
arm64: dts: qcom: sm8450: Add 'global' interrupt to the PCIe RC node
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...
Hence, add it to the PCIe RC node along with the existing MSI interrupts.
Manivannan Sadhasivam [Wed, 28 Aug 2024 15:46:19 +0000 (21:16 +0530)]
arm64: dts: qcom: sa8775p: Add 'linux,pci-domain' to PCIe EP controller nodes
'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.
Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SA8775P SoC.
Currently, UART configuration is populated for only a few SEs
(Serial Engines) in the sa8775p DTSI file. Since every SE can
support the UART protocol, usecase or client should have the flexibility
to enable required SE for UART depending on the specific board version.
Hence, populate UART configurations for the remaining SEs in the
sa8775p SoC.
Srinivas Kandagatla [Fri, 4 Oct 2024 13:08:49 +0000 (14:08 +0100)]
arm64: dts: qcom: x1e80100-t14s: add another trackpad support
Trackpad HID device on T14s could be found on two possible slave addresses
(hid@15 and hid@2c) on i2c0 instance.
With the current state of DT boot, there is no way to patch the device
tree at runtime during boot. This, however results in non-functional
trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
slave address.
This patch adds hid@2c device along with hid@15 to get it working on
both the variants. This should work as i2c-hid driver will stop
probing the device if there is nothing on the slave address, we can
actually keep both devices enabled in DT, and i2c-hid driver will
only probe the existing one.
The only problem is that we cannot setup pinctrl in both device nodes,
as two devices with the same pinctrl will cause pin conflict that makes
the second device fail to probe. Let's move the pinctrl state up to
parent node along with the parent pinctrl to solve this problem.
Johan Hovold [Wed, 9 Oct 2024 16:17:15 +0000 (18:17 +0200)]
arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
The DWC PCIe controller can be used with its internal MSI controller or
with an external one such as the GICv3 Interrupt Translation Service
(ITS).
Add the msi-map properties needed to use the GIC ITS. This will also
make Linux switch to the ITS implementation, which allows for assigning
affinity to individual MSIs. This specifically allows NVMe and Wi-Fi
interrupts to be processed on all cores (and not just on CPU0).
Note that using the GIC ITS on x1e80100 will cause Advanced Error
Reporting (AER) interrupts to be received on errors unlike when using
the internal MSI controller. Consequently, notifications about
(correctable) errors may now be logged for errors that previously went
unnoticed.
Also note that PCIe5 (and PCIe3) can currently only be used with the
internal MSI controller due to a platform (firmware) limitation.
Bjorn Andersson [Sat, 5 Oct 2024 04:09:05 +0000 (21:09 -0700)]
arm64: dts: qcom: qcs6490-rb3gen2: Specify i2c1 clock frequency
Per the binding, omitting the clock frequency from a Geni I2C controller
node defaults the bus to 100Khz. But at least in Linux, a friendly info
print highlights the lack of explicitly defined frequency in the
DeviceTree.
Specify the frequency, to give it an explicit value, and to silence the
log print in Linux.
arm64: dts: qcom: sda660-ifc6560: enable mDSP and WiFi devices
Enable the onboard WiFi device present on the Inforce IFC6560 SBC.
Pretty much like MSM8998 this device also doesn't generate the
MSA_READY_IND indication.
For the reference:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40050000
ath10k_snoc 18800000.wifi: qmi fw_version 0x101d01da fw_build_timestamp 2018-07-26 21:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.1.c2-00474-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: qmi not waiting for msa_ready indicator
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.54 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
arm64: dts: qcom: sda660-ifc6560: fix l10a voltage ranges
L10A, being a fixed regulator, should have min_voltage = max_voltage,
otherwise fixed rulator fails to probe. Fix the max_voltage range to be
equal to minimum.
arm64: dts: qcom: sdm630: enable GPU SMMU and GPUCC
Now as the arm-smmu-qcom driver gained workarounds for the Adreno SMMU,
it becomes possible to safely enable GPU on the devices. Enable GPU SMMU
and GPU clock controller. GPU should be enabled for target devices that
have ZAP shader blob.
Luca Weiss [Wed, 2 Oct 2024 13:01:08 +0000 (15:01 +0200)]
arm64: dts: qcom: qcm6490-fairphone-fp5: Add thermistor for UFS/RAM
Configure the ADC and thermal zone for the thermistor next to the
UFS+RAM chip which is connected to GPIO_12 of PM7250B. It is used to
measure the temperature of that area of the PCB.
arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G
Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.
It enables the support for Wi-Fi, NVMe, the two USB Type-C ports,
Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets
or USB audio), external display via DisplayPort over Type-C (only
the bottom USB Type-C port is working so far), charging, the Surface
Aggregator Module (SAM) to get keyboard and touchpad working with
Surface Type Cover accessories.
Some key features not supported yet:
- built-in display (but software fallback is working with efifb
when blacklisting the msm module)
- built-in display touchscreen
- external display with the top USB Type-C port
- speakers and microphones
- physical volume up and down keys
- LID switch detection
This devicetree is based on the other SC8280XP ones, for the Lenovo
ThinkPad X13s and the Qualcomm CRD.
Danila Tikhonov [Sun, 18 Aug 2024 19:29:05 +0000 (22:29 +0300)]
arm64: dts: qcom: sc7280: Fix PMU nodes for Cortex A55 and A78
The SC7280, SM7325, and QCM6490 platforms feature an 8-core setup
consisting of:
- 1x Kryo 670 Prime (Cortex-A78) / Kryo 670 Gold Plus (Cortex-A78)
- 3x Kryo 670 Gold (Cortex-A78)
- 4x Kryo 670 Silver (Cortex-A55)
(The CPU cores in the SC7280 are simply called Kryo, but are
nevertheless based on the same Cortex A78 and A55).
Describe the TCSR download mode register to enable download mode
control.
This specifically allows the OS to disable download mode in case the
boot firmware has left it enabled to avoid entering the crash dump mode
after a hypervisor reset by default.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:24 +0000 (00:57 +0200)]
arm64: dts: qcom: x1e80100: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:23 +0000 (00:57 +0200)]
arm64: dts: qcom: sm8450: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:22 +0000 (00:57 +0200)]
arm64: dts: qcom: sm8350: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:21 +0000 (00:57 +0200)]
arm64: dts: qcom: sm8150: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:20 +0000 (00:57 +0200)]
arm64: dts: qcom: sm6350: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:19 +0000 (00:57 +0200)]
arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:18 +0000 (00:57 +0200)]
arm64: dts: qcom: sdm670: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:17 +0000 (00:57 +0200)]
arm64: dts: qcom: sc8280xp: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:16 +0000 (00:57 +0200)]
arm64: dts: qcom: sc8180x: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Konrad Dybcio [Wed, 18 Sep 2024 22:57:15 +0000 (00:57 +0200)]
arm64: dts: qcom: sc7180: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s (sc8280xp) Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-rb3 Link: https://lore.kernel.org/r/20240919-topic-apps_smmu_coherent-v1-2-5b3a8662403d@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 18 Sep 2024 22:57:14 +0000 (00:57 +0200)]
arm64: dts: qcom: qdu1000: Affirm IDR0.CCTW on apps_smmu
On RPMh-based SoCs, the APPS SMMU advertizes support for cache-coherent
pagetable walk via the IDR0 register. This however is not respected by
the arm-smmu driver unless dma-coherent is set.
Mark the node as dma-coherent to ensure this (and other) implementations
take this coherency into account.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:06:02 +0000 (13:06 +0300)]
arm64: dts: qcom: sm8650-qrd: remove status property from dispcc device tree node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-QRD board.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:06:01 +0000 (13:06 +0300)]
arm64: dts: qcom: sm8650-mtp: remove status property from dispcc device tree node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-MTP board.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:06:00 +0000 (13:06 +0300)]
arm64: dts: qcom: sm8650-hdk: remove status property from dispcc device tree node
After a change enabling display clock controller for all Qualcomm SM8650
powered board by default there is no more need to set a status property
of dispcc on SM8650-HDK board.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:05:58 +0000 (13:05 +0300)]
arm64: dts: qcom: sm8450-hdk: remove status property from dispcc device tree node
After a change enabling display clock controller for all Qualcomm SM8450
powered board by default there is no more need to set a status property
of dispcc on SM8450-HDK board.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:05:56 +0000 (13:05 +0300)]
arm64: dts: qcom: sm8450-sony-xperia-nagara: disable dispcc on derived boards
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450 powered
Sony Xperia phones.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:05:55 +0000 (13:05 +0300)]
arm64: dts: qcom: sm8450-qrd: explicitly disable dispcc on the board
A platform display clock controller is expected to be enabled by default
for all boards, however in particular cases preset display clock setting
is expected. To avoid any probable regression before enabling display
clock controller for all SM8450 platforms disable it for SM8450-QRD board
only.
Vladimir Zapolskiy [Tue, 24 Sep 2024 10:05:54 +0000 (13:05 +0300)]
arm64: dts: qcom: sm8350-hdk: remove a blank overwrite of dispcc node status
According to the description of dispcc device tree node from sm8350.dtsi
there is no need to set a status property value to enable the display clock
controller.
arm64: dts: qcom: sc7280: don't enable GPU on unsupported devices
On SC7280 and derivative platforms GPU by default requires a signed
binary, a660_zap.mbn. Disable GPU by default and enable it only when
the binary is actually available (QCM6490-IDP, RB3gen2). ChromeOS
devices do not use TrustZone, so GPU can be enabled by default in
sc7280-chrome-common.dtsi. FairPhone5 and SHIFTphone8 DTS already
enable GPU (even though it wasn't required beforehand).
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Chao Gao <chao.gao@intel.com> Cc: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Merge tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Merge tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
Merge tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"lockdep:
- Fix potential deadlock between lockdep and RCU (Zhiguo Niu)
- Use str_plural() to address Coccinelle warning (Thorsten Blum)
- Add debuggability enhancement (Luis Claudio R. Goncalves)
static keys & calls:
- Fix static_key_slow_dec() yet again (Peter Zijlstra)
- Handle module init failure correctly in static_call_del_module()
(Thomas Gleixner)
- Replace pointless WARN_ON() in static_call_module_notify() (Thomas
Gleixner)
<linux/cleanup.h>:
- Add usage and style documentation (Dan Williams)
rwsems:
- Move is_rwsem_reader_owned() and rwsem_owner() under
CONFIG_DEBUG_RWSEMS (Waiman Long)
atomic ops, x86:
- Redeclare x86_32 arch_atomic64_{add,sub}() as void (Uros Bizjak)
- Introduce the read64_nonatomic macro to x86_32 with cx8 (Uros
Bizjak)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Move is_rwsem_reader_owned() and rwsem_owner() under CONFIG_DEBUG_RWSEMS
jump_label: Fix static_key_slow_dec() yet again
static_call: Replace pointless WARN_ON() in static_call_module_notify()
static_call: Handle module init failure correctly in static_call_del_module()
locking/lockdep: Simplify character output in seq_line()
lockdep: fix deadlock issue between lockdep and rcu
lockdep: Use str_plural() to fix Coccinelle warning
cleanup: Add usage and style documentation
lockdep: suggest the fix for "lockdep bfs error:-1" on print_bfs_bug
locking/atomic/x86: Redeclare x86_32 arch_atomic64_{add,sub}() as void
locking/atomic/x86: Introduce the read64_nonatomic macro to x86_32 with cx8
Merge tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
Julia Lawall [Sat, 28 Sep 2024 19:26:22 +0000 (21:26 +0200)]
Reduce Coccinelle choices in string_choices.cocci
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Hongbo Li [Wed, 11 Sep 2024 01:09:27 +0000 (09:09 +0800)]
coccinelle: Remove unnecessary parentheses for only one possible change.
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
projects / users / jedix / linux-maple.git / log