Matthew Wilcox (Oracle) [Wed, 8 Nov 2023 20:46:02 +0000 (20:46 +0000)]
mm: remove test_set_page_writeback()
Patch series "Make folio_start_writeback return void".
Most of the folio flag-setting functions return void.
folio_start_writeback is gratuitously different; the only two filesystems
that do anything with the return value emit debug messages if it's already
set, and we can (and should) do that internally without bothering the
filesystem to do it.
Matthew Wilcox (Oracle) [Tue, 7 Nov 2023 21:26:42 +0000 (21:26 +0000)]
gfs2: convert stuffed_readpage() to stuffed_read_folio()
Use folio_fill_tail() to implement the unstuffing and folio_end_read() to
simultaneously mark the folio uptodate and unlock it. Unifies a couple of
code paths.
Link: https://lkml.kernel.org/r/20231107212643.3490372-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 7 Nov 2023 21:26:41 +0000 (21:26 +0000)]
mm: add folio_fill_tail() and use it in iomap
The iomap code was limited to PAGE_SIZE bytes; generalise it to cover
an arbitrary-sized folio, and move it to be a common helper.
Link: https://lkml.kernel.org/r/20231107212643.3490372-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Tue, 7 Nov 2023 21:26:40 +0000 (21:26 +0000)]
mm: add folio_zero_tail() and use it in ext4
Patch series "Add folio_zero_tail() and folio_fill_tail()".
I'm trying to make it easier for filesystems with tailpacking / stuffing /
inline data to use folios. The primary function here is
folio_fill_tail(). You give it a pointer to memory where the data
currently is, and it takes care of copying it into the folio at that
offset. That works for gfs2 & iomap. Then There's Ext4. Rather than gin
up some kind of specialist "Here's a two pointers to two blocks of memory"
routine, just let it do its current thing, and let it call
folio_zero_tail(), which is also called by folio_fill_tail().
Other filesystems can be converted later; these ones seemed like good
examples as they're already partly or completely converted to folios.
This patch (of 3):
Instead of unmapping the folio after copying the data to it, then mapping
it again to zero the tail, provide folio_zero_tail() to zero the tail of
an already-mapped folio.
Andrei Vagin [Fri, 17 Nov 2023 18:11:27 +0000 (10:11 -0800)]
selftests/mm: don't fail if pagemap_scan isn't supported
This change allows to run tests on old kernels.
Link: https://lkml.kernel.org/r/20231117181127.2574897-1-avagin@google.com Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/lkml/696a0a99-eb42-4e13-be14-58a88c9c33f7@arm.com/ Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrei Vagin [Mon, 6 Nov 2023 22:09:59 +0000 (14:09 -0800)]
selftests/mm: check that PAGEMAP_SCAN returns correct categories
Right now, tests read page flags from /proc/pid/pagemap files. With this
change, tests will check that PAGEMAP_SCAN return correct information too.
Link: https://lkml.kernel.org/r/20231106220959.296568-2-avagin@google.com Signed-off-by: Andrei Vagin <avagin@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20231107164139.576046-1-avagin@google.com Signed-off-by: Andrei Vagin <avagin@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrei Vagin [Mon, 6 Nov 2023 22:09:58 +0000 (14:09 -0800)]
fs/proc/task_mmu: report SOFT_DIRTY bits through the PAGEMAP_SCAN ioctl
The PAGEMAP_SCAN ioctl returns information regarding page table entries.
It is more efficient compared to reading pagemap files. CRIU can start to
utilize this ioctl, but it needs info about soft-dirty bits to track
memory changes.
We are aware of a new method for tracking memory changes implemented in
the PAGEMAP_SCAN ioctl. For CRIU, the primary advantage of this method is
its usability by unprivileged users. However, it is not feasible to
transparently replace the soft-dirty tracker with the new one. The main
problem here is userfault descriptors that have to be preserved between
pre-dump iterations. It means criu continues supporting the soft-dirty
method to avoid breakage for current users. The new method will be
implemented as a separate feature.
Link: https://lkml.kernel.org/r/20231106220959.296568-1-avagin@google.com Signed-off-by: Andrei Vagin <avagin@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Verma [Tue, 7 Nov 2023 07:22:43 +0000 (00:22 -0700)]
dax/kmem: allow kmem to add memory with memmap_on_memory
Large amounts of memory managed by the kmem driver may come in via CXL,
and it is often desirable to have the memmap for this memory on the new
memory itself.
Enroll kmem-managed memory for memmap_on_memory semantics if the dax
region originates via CXL. For non-CXL dax regions, retain the existing
default behavior of hot adding without memmap_on_memory semantics.
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-3-1253ec050ed0@intel.com Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Verma [Tue, 7 Nov 2023 07:22:42 +0000 (00:22 -0700)]
mm/memory_hotplug: split memmap_on_memory requests across memblocks
The MHP_MEMMAP_ON_MEMORY flag for hotplugged memory is restricted to
'memblock_size' chunks of memory being added. Adding a larger span of
memory precludes memmap_on_memory semantics.
For users of hotplug such as kmem, large amounts of memory might get added
from the CXL subsystem. In some cases, this amount may exceed the
available 'main memory' to store the memmap for the memory being added.
In this case, it is useful to have a way to place the memmap on the memory
being added, even if it means splitting the addition into memblock-sized
chunks.
Change add_memory_resource() to loop over memblock-sized chunks of memory
if caller requested memmap_on_memory, and if other conditions for it are
met. Teach try_remove_memory() to also expect that a memory range being
removed might have been split up into memblock sized chunks, and to loop
through those as needed.
This does preclude being able to use PUD mappings in the direct map; a
proposal to how this could be optimized in the future is laid out here[1].
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-2-1253ec050ed0@intel.com Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Verma [Tue, 7 Nov 2023 07:22:41 +0000 (00:22 -0700)]
mm/memory_hotplug: replace an open-coded kmemdup() in add_memory_resource()
Patch series "mm: use memmap_on_memory semantics for dax/kmem", v10.
The dax/kmem driver can potentially hot-add large amounts of memory
originating from CXL memory expanders, or NVDIMMs, or other 'device
memories'. There is a chance there isn't enough regular system memory
available to fit the memmap for this new memory. It's therefore
desirable, if all other conditions are met, for the kmem managed memory to
place its memmap on the newly added memory itself.
The main hurdle for accomplishing this for kmem is that memmap_on_memory
can only be done if the memory being added is equal to the size of one
memblock. To overcome this, allow the hotplug code to split an
add_memory() request into memblock-sized chunks, and try_remove_memory()
to also expect and handle such a scenario.
Patch 1 replaces an open-coded kmemdup()
Patch 2 teaches the memory_hotplug code to allow for splitting
add_memory() and remove_memory() requests over memblock sized chunks.
Patch 3 allows the dax region drivers to request memmap_on_memory
semantics. CXL dax regions default this to 'on', all others default to
off to keep existing behavior unchanged.
This patch (of 3):
A review of the memmap_on_memory modifications to add_memory_resource()
revealed an instance of an open-coded kmemdup(). Replace it with
kmemdup().
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-0-1253ec050ed0@intel.com Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-1-1253ec050ed0@intel.com Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Ni [Thu, 26 Oct 2023 02:03:29 +0000 (10:03 +0800)]
NUMA: optimize detection of memory with no node id assigned by firmware
Sanity check that makes sure the nodes cover all memory loops over
numa_meminfo to count the pages that have node id assigned by the
firmware, then loops again over memblock.memory to find the total amount
of memory and in the end checks that the difference between the total
memory and memory that covered by nodes is less than some threshold.
Worse, the loop over numa_meminfo calls __absent_pages_in_range() that
also partially traverses memblock.memory.
It's much simpler and more efficient to have a single traversal of
memblock.memory that verifies that amount of memory not covered by nodes
is less than a threshold.
Introduce memblock_validate_numa_coverage() that does exactly that and use
it instead of numa_meminfo_cover_memory().
Link: https://lkml.kernel.org/r/20231026020329.327329-1-zhiguangni01@gmail.com Signed-off-by: Liam Ni <zhiguangni01@gmail.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bibo Mao <maobibo@loongson.cn> Cc: Binbin Zhou <zhoubinbin@loongson.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Feiyang Chen <chenfeiyang@loongson.cn> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reason is that the split_huge_page_to_list() will build migration
entries for each subpage of a pte-mapped Anon THP by try_to_migrate(), or
unmap for file THP, and it will clear and tlb flush for each subpage's
pte. Moreover, the split_huge_page_to_list() will set TTU_SPLIT_HUGE_PMD
flag to ensure the THP is already a pte-mapped THP before splitting it to
some normal pages.
Actually, there is no need to flush tlb for each subpage immediately,
instead we can batch tlb flush for the pte-mapped THP to improve the
performance.
After this patch, we can see the batch tlb flush can improve the latency
obviously when running thpscale.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:29 +0000 (13:16 -0400)]
maple_tree: mtree_range_walk() clean up
mtree_range_walk() needed to be updated to avoid checking if there was a
pivot value. On closer examination, the code could avoid setting min or
max in certain scenarios. The commit removes the extra check for
pivot[offset] before setting max and only sets max when necessary. It
also only sets min if it is necessary by checking offset 0 prior to the
loop (as it has always done).
The commit also drops a dead node check since the end of the node will
return the array size when the last slot is occupied (by a potential reuse
in a dead node). The data will be discarded later if the node is marked
dead.
Benchmarking these changes results in an increase in performance of 5.45%
using the BENCH_WALK in the maple tree test code.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:28 +0000 (13:16 -0400)]
maple_tree: don't find node end in mtree_lookup_walk()
Since the pivot being set is now reliable, the optimized loop no longer
needs to find the node end. The redundant check for a dead node can also
be avoided as there is no danger of using the wrong pivot since the
results will be thrown out in the case of a dead node by the later check.
This patch also adds a benchmark test for the function to the maple tree
test framework. The benchmark shows an average increase performance of
5.98% over 3 runs with this commit.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:27 +0000 (13:16 -0400)]
maple_tree: use maple state end for write operations
ma_wr_state was previously tracking the end of the node for writing.
Since the implementation of the ma_state end tracking, this is duplicated
work. This patch removes the maple write state tracking of the end of the
node and uses the maple state end instead.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:26 +0000 (13:16 -0400)]
maple_tree: remove mas_searchable()
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:25 +0000 (13:16 -0400)]
maple_tree: separate ma_state node from status.
The maple tree node is overloaded to keep status as well as the active
node. This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure. Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.
The status being an enum has the benefit of detecting unhandled status in
switch statements.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:24 +0000 (13:16 -0400)]
maple_tree: clean up inlines for some functions
There are a few functions which were inlined but are somewhat too large to
inline, so remove the inline key word.
There are also several very small functions which are used in critical
code sections which gcc was not inlining, so make this more strict and use
__always_line for these functions.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:21 +0000 (13:16 -0400)]
maple_tree: add end of node tracking to the maple state
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:20 +0000 (13:16 -0400)]
maple_tree: move debug check to __mas_set_range()
__mas_set_range() was created to shortcut resetting the maple state and a
debug check was added to the caller (the vma iterator) to ensure the
internal maple state remains safe to use. Move the debug check from the
vma iterator into the maple tree itself so other users do not incorrectly
use the advanced maple state modification.
Fallout from this change include a large amount of debug setup needed to
be moved to earlier in the header, and the maple_tree.h radix-tree test
code needed to move the inclusion of the header to after the atomic
define. None of those changes have functional changes.
Liam R. Howlett [Wed, 1 Nov 2023 17:16:18 +0000 (13:16 -0400)]
maple_tree: remove unnecessary default labels from switch statements
Patch series "maple_tree: iterator state changes".
These patches have some general cleanup and a change to separate the maple
state status tracking from the maple state node.
The maple state status change allows for walks to continue from previous
places when the status needs to be recorded to make logical sense for the
next call to the maple state. For instance, it allows for prev/next to
function in a way that better resembles the linked list. It also allows
switch statements to be used to detect missed states during compile, and
the addition of fast-path "active" state is cleaner as an enum.
While making the status change, perf showed some very small (one line)
functions that were not inlined even with the inline key word. Making
these small functions __always_inline is less expensive according to perf.
As part of that change, some inlines have been dropped from larger
functions.
Perf also showed that the commonly used mas_for_each() iterator was
spending a lot of time finding the end of the node. This series
introduces caching of the end of the node in the maple state (and updating
it during writes). This caching along with the inline changes yielded at
23.25% improvement on the BENCH_MAS_FOR_EACH maple tree test framework
benchmark.
I've also included a change to mtree_range_walk and mtree_lookup_walk to
take advantage of Peng's change [1] to the initial pivot setup.
Peng Zhang [Fri, 27 Oct 2023 03:38:45 +0000 (11:38 +0800)]
fork: use __mt_dup() to duplicate maple tree in dup_mmap()
In dup_mmap(), using __mt_dup() to duplicate the old maple tree and then
directly replacing the entries of VMAs in the new maple tree can result in
better performance. __mt_dup() uses DFS pre-order to duplicate the maple
tree, so it is efficient.
The average time complexity of __mt_dup() is O(n), where n is the number
of VMAs. The proof of the time complexity is provided in the commit log
that introduces __mt_dup(). After duplicating the maple tree, each
element is traversed and replaced (ignoring the cases of deletion, which
are rare). Since it is only a replacement operation for each element,
this process is also O(n).
Analyzing the exact time complexity of the previous algorithm is
challenging because each insertion can involve appending to a node,
pushing data to adjacent nodes, or even splitting nodes. The frequency of
each action is difficult to calculate. The worst-case scenario for a
single insertion is when the tree undergoes splitting at every level. If
we consider each insertion as the worst-case scenario, we can determine
that the upper bound of the time complexity is O(n*log(n)), although this
is a loose upper bound. However, based on the test data, it appears that
the actual time complexity is likely to be O(n).
As the entire maple tree is duplicated using __mt_dup(), if dup_mmap()
fails, there will be a portion of VMAs that have not been duplicated in
the maple tree. To handle this, we mark the failure point with
XA_ZERO_ENTRY. In exit_mmap(), if this marker is encountered, stop
releasing VMAs that have not been duplicated after this point.
There is a "spawn" in byte-unixbench[1], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
Peng Zhang [Fri, 27 Oct 2023 03:38:44 +0000 (11:38 +0800)]
maple_tree: preserve the tree attributes when destroying maple tree
When destroying maple tree, preserve its attributes and then turn it into
an empty tree. This allows it to be reused without needing to be
reinitialized.
Link: https://lkml.kernel.org/r/20231027033845.90608-10-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peng Zhang [Fri, 27 Oct 2023 03:38:40 +0000 (11:38 +0800)]
maple_tree: add test for mtree_dup()
Add test for mtree_dup().
Test by duplicating different maple trees and then comparing the two
trees. Includes tests for duplicating full trees and memory allocation
failures on different nodes.
Link: https://lkml.kernel.org/r/20231027033845.90608-6-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peng Zhang [Fri, 27 Oct 2023 03:38:39 +0000 (11:38 +0800)]
radix tree test suite: align kmem_cache_alloc_bulk() with kernel behavior.
When kmem_cache_alloc_bulk() fails to allocate, leave the freed pointers
in the array. This enables a more accurate simulation of the kernel's
behavior and allows for testing potential double-free scenarios.
Link: https://lkml.kernel.org/r/20231027033845.90608-5-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peng Zhang [Fri, 27 Oct 2023 03:38:38 +0000 (11:38 +0800)]
maple_tree: introduce interfaces __mt_dup() and mtree_dup()
Introduce interfaces __mt_dup() and mtree_dup(), which are used to
duplicate a maple tree. They duplicate a maple tree in Depth-First Search
(DFS) pre-order traversal. It uses memcopy() to copy nodes in the source
tree and allocate new child nodes in non-leaf nodes. The new node is
exactly the same as the source node except for all the addresses stored in
it. It will be faster than traversing all elements in the source tree and
inserting them one by one into the new tree. The time complexity of these
two functions is O(n).
The difference between __mt_dup() and mtree_dup() is that mtree_dup()
handles locks internally.
Analysis of the average time complexity of this algorithm:
For simplicity, let's assume that the maximum branching factor of all
non-leaf nodes is 16 (in allocation mode, it is 10), and the tree is a
full tree.
Under the given conditions, if there is a maple tree with n elements, the
number of its leaves is n/16. From bottom to top, the number of nodes in
each level is 1/16 of the number of nodes in the level below. So the
total number of nodes in the entire tree is given by the sum of n/16 +
n/16^2 + n/16^3 + ... + 1. This is a geometric series, and it has log(n)
terms with base 16. According to the formula for the sum of a geometric
series, the sum of this series can be calculated as (n-1)/15. Each node
has only one parent node pointer, which can be considered as an edge. In
total, there are (n-1)/15-1 edges.
This algorithm consists of two operations:
1. Traversing all nodes in DFS order.
2. For each node, making a copy and performing necessary modifications
to create a new node.
For the first part, DFS traversal will visit each edge twice. Let
T(ascend) represent the cost of taking one step downwards, and T(descend)
represent the cost of taking one step upwards. And both of them are
constants (although mas_ascend() may not be, as it contains a loop, but
here we ignore it and treat it as a constant). So the time spent on the
first part can be represented as ((n-1)/15-1) * (T(ascend) + T(descend)).
For the second part, each node will be copied, and the cost of copying a
node is denoted as T(copy_node). For each non-leaf node, it is necessary
to reallocate all child nodes, and the cost of this operation is denoted
as T(dup_alloc). The behavior behind memory allocation is complex and not
specific to the maple tree operation. Here, we assume that the time
required for a single allocation is constant. Since the size of a node is
fixed, both of these symbols are also constants. We can calculate that
the time spent on the second part is ((n-1)/15) * T(copy_node) + ((n-1)/15
- n/16) * T(dup_alloc).
Adding both parts together, the total time spent by the algorithm can be
represented as:
Peng Zhang [Fri, 27 Oct 2023 03:38:37 +0000 (11:38 +0800)]
maple_tree: introduce {mtree,mas}_lock_nested()
In some cases, nested locks may be needed, so {mtree,mas}_lock_nested is
introduced. For example, when duplicating maple tree, we need to hold the
locks of two trees, in which case nested locks are needed.
At the same time, add the definition of spin_lock_nested() in tools for
testing.
Link: https://lkml.kernel.org/r/20231027033845.90608-3-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peng Zhang [Fri, 27 Oct 2023 03:38:36 +0000 (11:38 +0800)]
maple_tree: add mt_free_one() and mt_attr() helpers
Patch series "Introduce __mt_dup() to improve the performance of fork()", v7.
This series introduces __mt_dup() to improve the performance of fork().
During the duplication process of mmap, all VMAs are traversed and
inserted one by one into the new maple tree, causing the maple tree to be
rebalanced multiple times. Balancing the maple tree is a costly
operation. To duplicate VMAs more efficiently, mtree_dup() and __mt_dup()
are introduced for the maple tree. They can efficiently duplicate a maple
tree.
Here are some algorithmic details about {mtree,__mt}_dup(). We perform a
DFS pre-order traversal of all nodes in the source maple tree. During
this process, we fully copy the nodes from the source tree to the new
tree. This involves memory allocation, and when encountering a new node,
if it is a non-leaf node, all its child nodes are allocated at once.
This idea was originally from Liam R. Howlett's Maple Tree Work email,
and I added some of my own ideas to implement it. Some previous
discussions can be found in [1]. For a more detailed analysis of the
algorithm, please refer to the logs for patch [3/10] and patch [10/10].
There is a "spawn" in byte-unixbench[2], which can be used to test the
performance of fork(). I modified it slightly to make it work with
different number of VMAs.
Below are the test results. The first row shows the number of VMAs. The
second and third rows show the number of fork() calls per ten seconds,
corresponding to next-20231006 and the this patchset, respectively. The
test results were obtained with CPU binding to avoid scheduler load
balancing that could cause unstable results. There are still some
fluctuations in the test results, but at least they are better than the
original performance.
Li Zhijian [Fri, 3 Nov 2023 03:14:50 +0000 (11:14 +0800)]
mm/vmstat: move pgdemote_* to per-node stats
Demotion will migrate pages across nodes. Previously, only the global
demotion statistics were accounted for. Changed them to per-node
statistics, making it easier to observe where demotion occurs on each
node.
This will help to identify which nodes are under pressure.
This patch also make pgdemote_* behind CONFIG_NUMA_BALANCING, since
demotion is not available for !CONFIG_NUMA_BALANCING
With this patch, here is a sample where node0 node1 are DRAM,
node3 is PMEM:
Global stats:
$ grep demote /proc/vmstat
pgdemote_kswapd 254288
pgdemote_direct 113497
pgdemote_khugepaged 0
Arnd Bergmann [Mon, 23 Oct 2023 11:01:55 +0000 (13:01 +0200)]
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
All other users of crypto code use 'select' instead of 'depends on', so do
the same thing with KEXEC_FILE for consistency.
In practice this makes very little difference as kernels with kexec
support are very likely to also include some other feature that already
selects both crypto and crypto_sha256, but being consistent here helps for
usability as well as to avoid potential circular dependencies.
This reverts the dependency back to what it was originally before commit 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for
new syscall"), which changed changed it with the comment "This should be
safer as "select" is not recursive", but that appears to have been done in
error, as "select" is indeed recursive, and there are no other
dependencies that prevent CRYPTO_SHA256 from being selected here.
Link: https://lkml.kernel.org/r/20231023110308.1202042-2-arnd@kernel.org Fixes: 74ca317c26a3f ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric DeVolder <eric.devolder@oracle.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arnd Bergmann [Mon, 23 Oct 2023 11:01:54 +0000 (13:01 +0200)]
kexec: fix KEXEC_FILE dependencies
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call").
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric DeVolder <eric.devolder@oracle.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Charan Teja Kalla [Fri, 27 Oct 2023 10:49:38 +0000 (16:19 +0530)]
mm/sparsemem: fix race in accessing memory_section->usage
use kfree_rcu() in place of synchronize_rcu(), per David
Link: https://lkml.kernel.org/r/1698403778-20938-1-git-send-email-quic_charante@quicinc.com Fixes: f46edbd1b151 ("mm/sparsemem: add helpers track active portions of a section at boot") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Charan Teja Kalla [Fri, 13 Oct 2023 13:04:27 +0000 (18:34 +0530)]
mm/sparsemem: fix race in accessing memory_section->usage
The below race is observed on a PFN which falls into the device memory
region with the system memory configuration where PFN's are such that
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL]. Since normal zone start and end
pfn contains the device memory PFN's as well, the compaction triggered
will try on the device memory PFN's too though they end up in NOP(because
pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections). When
from other core, the section mappings are being removed for the
ZONE_DEVICE region, that the PFN in question belongs to, on which
compaction is currently being operated is resulting into the kernel crash
with CONFIG_SPASEMEM_VMEMAP enabled. The crash logs can be seen at [1].
compact_zone() memunmap_pages
------------- ---------------
__pageblock_pfn_to_page
......
(a)pfn_valid():
valid_section()//return true
(b)__remove_pages()->
sparse_remove_section()->
section_deactivate():
[Free the array ms->usage and set
ms->usage = NULL]
pfn_section_valid()
[Access ms->usage which
is NULL]
NOTE: From the above it can be said that the race is reduced to between
the pfn_valid()/pfn_section_valid() and the section deactivate with
SPASEMEM_VMEMAP enabled.
The commit b943f045a9af("mm/sparse: fix kernel crash with
pfn_section_valid check") tried to address the same problem by clearing
the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns
false thus ms->usage is not accessed.
Fix this issue by the below steps:
a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage.
b) RCU protected read side critical section will either return NULL
when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage.
c) Free the ->usage with kfree_rcu() and set ms->usage = NULL. No
attempt will be made to access ->usage after this as the
SECTION_HAS_MEM_MAP is cleared thus valid_section() return false.
Thanks to David/Pavan for their inputs on this patch.
On Snapdragon SoC, with the mentioned memory configuration of PFN's as
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of
issues daily while testing on a device farm.
For this particular issue below is the log. Though the below log is
not directly pointing to the pfn_section_valid(){ ms->usage;}, when we
loaded this dump on T32 lauterbach tool, it is pointing.
Link: https://lkml.kernel.org/r/1697202267-23600-1-git-send-email-quic_charante@quicinc.com Fixes: f46edbd1b151 ("mm/sparsemem: add helpers track active portions of a section at boot") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jiexun Wang [Thu, 21 Sep 2023 12:27:51 +0000 (20:27 +0800)]
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
I conducted real-time testing and observed that
madvise_cold_or_pageout_pte_range() causes significant latency under
memory pressure, which can be effectively reduced by adding cond_resched()
within the loop.
I tested on the LicheePi 4A board using Cylictest for latency testing and
Ftrace for latency tracing. The board uses TH1520 processor and has a
memory size of 8GB. The kernel version is 6.5.0 with the PREEMPT_RT patch
applied.
After the modification, the cause of maximum latency is no longer
madvise_cold_or_pageout_pte_range(), so this modification can reduce the
latency caused by madvise_cold_or_pageout_pte_range().
Currently the madvise_cold_or_pageout_pte_range() function exhibits
significant latency under memory pressure, which can be effectively
reduced by adding cond_resched() within the loop.
When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule
the task to ensure fairness and avoid long lock holding times.
David Stevens [Tue, 18 Apr 2023 08:40:31 +0000 (17:40 +0900)]
mm/shmem: fix race in shmem_undo_range w/THP
Split folios during the second loop of shmem_undo_range. It's not
sufficient to only split folios when dealing with partial pages, since
it's possible for a THP to be faulted in after that point. Calling
truncate_inode_folio in that situation can result in throwing away data
outside of the range being targeted.
Link: https://lkml.kernel.org/r/20230418084031.3439795-1-stevensd@google.com Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios") Signed-off-by: David Stevens <stevensd@chromium.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suleiman Souhlal <suleiman@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Sun, 19 Nov 2023 17:15:28 +0000 (17:15 +0000)]
mm/damon/core: copy nr_accesses when splitting region
Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.
However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.
Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ming Lei [Mon, 20 Nov 2023 08:35:59 +0000 (16:35 +0800)]
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
group_cpus_evenly() could be part of storage driver's error handler, such
as nvme driver, when may happen during CPU hotplug, in which storage queue
has to drain its pending IOs because all CPUs associated with the queue
are offline and the queue is becoming inactive. And handling IO needs
error handler to provide forward progress.
Then deadlock is caused:
1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's
handler is waiting for inflight IO
2) error handler is waiting for CPU hotplug lock
3) inflight IO can't be completed in blk-mq's CPU hotplug handler
because error handling can't provide forward progress.
Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(),
in which two stage spreads are taken: 1) the 1st stage is over all present
CPUs; 2) the end stage is over all other CPUs.
Turns out the two stage spread just needs consistent 'cpu_present_mask',
and remove the CPU hotplug lock by storing it into one local cache. This
way doesn't change correctness, because all CPUs are still covered.
Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Guangwu Zhang <guazhang@redhat.com> Tested-by: Guangwu Zhang <guazhang@redhat.com> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Heiko Carstens [Mon, 20 Nov 2023 18:37:17 +0000 (19:37 +0100)]
checkstack: fix printed address
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Sumanth Korikkar [Mon, 20 Nov 2023 14:53:53 +0000 (15:53 +0100)]
mm/memory_hotplug: fix error handling in add_memory_resource()
In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory(). However, creation of memory block
devices could fail. In that case, arch_remove_memory() is called to
perform necessary cleanup.
Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling. This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().
Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().
Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sumanth Korikkar [Mon, 20 Nov 2023 14:53:52 +0000 (15:53 +0100)]
mm/memory_hotplug: add missing mem_hotplug_lock
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chester Lin [Fri, 17 Nov 2023 02:28:07 +0000 (10:28 +0800)]
.mailmap: add a new address mapping for Chester Lin
My company email address is going to be disabled so let's create a mapping
that links to my private/community email just in case people might still
try to reach me via the old one.
Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.com Signed-off-by: Chester Lin <clin@suse.com> Cc: Chester Lin <chester62515@gmail.com> Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Fri, 17 Nov 2023 08:49:18 +0000 (00:49 -0800)]
mm: fix oops when filemap_map_pmd() without prealloc_pte
syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().
The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?
My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.
The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).
Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/ Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by: Hugh Dickins <hughd@google.com> Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/ Cc: Jann Horn <jannh@google.com>, Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> [5.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 16 Nov 2023 20:15:46 +0000 (15:15 -0500)]
mm/pagemap: fix wr-protect even if PM_SCAN_WP_MATCHING not set
The new pagemap ioctl contains a fast path for wr-protections without
looking into category masks. It forgets to check PM_SCAN_WP_MATCHING
before applying the wr-protections. It can cause, e.g., pte markers
installed on archs that do not even support uffd wr-protect.
WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline]
Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrei Vagin <avagin@gmail.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 3rd patch is something I found when testing these patches.
This patch (of 3):
The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided
by userfault, however in the vma test it didn't explicitly require the vma
to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is
set.
It means the pagemap code can now apply uffd-wp bit to a page in the vma
even if not registered to userfaultfd at all.
Then in whatever way as long as the pte got written and page fault
resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see
a pte that has both UFFD_WP and WRITE bit set. Anything later that looks
up the pte for uffd-wp bit will trigger the warning:
WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline]
Fix it by doing proper check over the vma attributes when
PM_SCAN_WP_MATCHING is specified.
Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Actually the problem is caused by uninitialized local variable in
current_obj_cgroup(). If the root memory cgroup is set as an active
memory cgroup for a charging scope (as in the trace, where systemd tries
to create the first non-root cgroup, so the parent cgroup is the root
cgroup), the "for" loop is skipped and uninitialized objcg is returned,
causing a panic down the accounting stack.
The fix is trivial: initialize the objcg variable to NULL unconditionally
before the "for" loop.
Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e5446d ("mm: kmem: scoped objcg protection") Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1959 Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_track_prepare() will call __alloc_pages() which attempts to acquire
zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks)
because it's not right to acquire spinlocks while holding raw_spinlocks in
RT mode.
Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Patrick Wang <patrick.wang.shcn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Wed, 15 Nov 2023 08:21:37 +0000 (16:21 +0800)]
Revert "mm/kmemleak: move the initialisation of object to __link_object"
Patch series "Fix invalid wait context of set_track_prepare()".
Geert reported an invalid wait context[1] which is resulted by moving
set_track_prepare() inside kmemleak_lock. This is not allowed because in
RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it
is not allowd to acquire spinlocks while holding raw_spinlocks. The
second patch fix same problem in kmemleak_update_trace().
This patch (of 2):
Move the initialisation of object back to__alloc_object() because
set_track_prepare() attempt to acquire zone->lock(spinlocks) while
__link_object is holding kmemleak_lock(raw_spinlocks). This is not right
for RT mode.
This reverts commit 245245c2fffd00 ("mm/kmemleak: move the initialisation
of object to __link_object").
Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com Fixes: 245245c2fffd ("mm/kmemleak: move the initialisation of object to __link_object") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Patrick Wang <patrick.wang.shcn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Kravetz [Tue, 14 Nov 2023 01:20:33 +0000 (17:20 -0800)]
hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/ Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Rik van Riel <riel@surriel.com> Cc: Edward Adam Davis <eadavis@qq.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryan Roberts [Tue, 14 Nov 2023 15:49:45 +0000 (15:49 +0000)]
mm: more ptep_get() conversion
Commit c33c794828f2 ("mm: ptep_get() conversion") converted all (non-arch)
call sites to use ptep_get() instead of doing a direct dereference of the
pte. Full rationale can be found in that commit's log.
Since then, three new call sites have snuck in, which directly dereference
the pte, so let's fix those up.
Unfortunately there is no reliable automated mechanism to catch these; I'm
relying on a combination of Coccinelle (which throws up a lot of false
positives) and some compiler magic to force a compiler error on
dereference (While this approach finds dereferences, it also yields a
non-booting kernel so can't be committed).
Helge Deller [Mon, 13 Nov 2023 10:12:57 +0000 (11:12 +0100)]
parisc: fix mmap_base calculation when stack grows upwards
Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down
layout and brk randomization").
That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.
Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.
Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100 Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization") Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk> Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hyeongtak Ji [Fri, 10 Nov 2023 05:37:09 +0000 (14:37 +0900)]
mm/damon/core.c: avoid unintentional filtering out of schemes
The function '__damos_filter_out()' causes DAMON to always filter out
schemes whose filter type is anon or memcg if its matching value is set
to false.
This commit addresses the issue by ensuring that '__damos_filter_out()'
no longer applies to filters whose type is 'anon' or 'memcg'.
Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com Fixes: ab9bda001b681 ("mm/damon/core: introduce address range type damos filter") Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Roman Gushchin [Tue, 7 Nov 2023 17:18:02 +0000 (09:18 -0800)]
mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation. Depending on slab page order and the size of slab objects,
objcg vector can take several pages.
If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code. Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.
Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector. It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.
An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.
Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Reported-by: Christoph Lameter <cl@linux.com> Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Mon, 6 Nov 2023 23:34:08 +0000 (23:34 +0000)]
mm/damon/sysfs-schemes: handle tried region directory allocation failure
DAMON sysfs interface's before_damos_apply callback
(damon_sysfs_before_damos_apply()), which creates the DAMOS tried regions
for each DAMOS action applied region, is not handling the allocation
failure for the sysfs directory data. As a result, NULL pointer
derefeence is possible. Fix it by handling the case.
Link: https://lkml.kernel.org/r/20231106233408.51159-4-sj@kernel.org Fixes: f1d13cacabe1 ("mm/damon/sysfs: implement DAMOS tried regions update command") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Mon, 6 Nov 2023 23:34:07 +0000 (23:34 +0000)]
mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
DAMOS tried regions sysfs directory allocation function
(damon_sysfs_scheme_regions_alloc()) is not handling the memory allocation
failure. In the case, the code will dereference NULL pointer. Handle the
failure to avoid such invalid access.
Link: https://lkml.kernel.org/r/20231106233408.51159-3-sj@kernel.org Fixes: 9277d0367ba1 ("mm/damon/sysfs-schemes: implement scheme region directory") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Mon, 6 Nov 2023 23:34:06 +0000 (23:34 +0000)]
mm/damon/sysfs: check error from damon_sysfs_update_target()
Patch series "mm/damon/sysfs: fix unhandled return values".
Some of DAMON sysfs interface code is not handling return values from some
functions. As a result, confusing user input handling or NULL-dereference
is possible. Check those properly.
This patch (of 3):
damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that. The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input. Fix it.
Stefan Roesch [Mon, 6 Nov 2023 18:19:18 +0000 (10:19 -0800)]
mm: fix for negative counter: nr_file_hugepages
While qualifiying the 6.4 release, the following warning was detected in
messages:
vmstat_refresh: nr_file_hugepages -15664
The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list. The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable. The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.
I have a test case, which reproduces the problem. It can be found here:
https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c
The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.
AFAIK version 6.1 until 6.6 are affected by this problem.
[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()] Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Breno Leitao [Fri, 3 Nov 2023 17:34:00 +0000 (10:34 -0700)]
selftests/mm: add hugetlb_fault_after_madv to .gitignore
commit 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb")
added a new test case, but, it didn't add the binary name in
tools/testing/selftests/mm/.gitignore.
Add hugetlb_fault_after_madv to tools/testing/selftests/mm/.gitignore.
Link: https://lkml.kernel.org/r/20231103173400.1608403-2-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao <leitao@debian.org> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Breno Leitao [Fri, 3 Nov 2023 17:33:59 +0000 (10:33 -0700)]
selftests/mm: restore number of hugepages
The test mm `hugetlb_fault_after_madv` selftest needs one and only one
huge page to run, thus it sets `/proc/sys/vm/nr_hugepages` to 1.
The problem is that further tests require the previous number of hugepages
allocated in order to succeed.
Save the number of huge pages before changing it, and restore it once the
test finishes, so, further tests could run successfully.
Link: https://lkml.kernel.org/r/20231103173400.1608403-1-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao <leitao@debian.org> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muhammad Usama Anjum [Fri, 3 Nov 2023 18:23:42 +0000 (23:23 +0500)]
selftests: mm: fix some build warnings
Fix build warnings:
pagemap_ioctl.c:1154:38: warning: format `%s' expects a matching `char *' argument [-Wformat=]
pagemap_ioctl.c:1162:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1192:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1600:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1628:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
Link: https://lkml.kernel.org/r/20231103182343.2874015-2-usama.anjum@collabora.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.
Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miri Korenblit [Sun, 12 Nov 2023 14:36:20 +0000 (16:36 +0200)]
wifi: iwlwifi: fix system commands group ordering
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Linus Torvalds [Sun, 12 Nov 2023 19:05:31 +0000 (11:05 -0800)]
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
Linus Torvalds [Sun, 12 Nov 2023 18:58:08 +0000 (10:58 -0800)]
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
Linus Torvalds [Sun, 12 Nov 2023 01:17:22 +0000 (17:17 -0800)]
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
Linus Torvalds [Sat, 11 Nov 2023 00:35:04 +0000 (16:35 -0800)]
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
Linus Torvalds [Fri, 10 Nov 2023 23:07:01 +0000 (15:07 -0800)]
Merge tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
Linus Torvalds [Fri, 10 Nov 2023 22:59:30 +0000 (14:59 -0800)]
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
Linus Torvalds [Fri, 10 Nov 2023 20:22:14 +0000 (12:22 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
Linus Torvalds [Fri, 10 Nov 2023 19:57:51 +0000 (11:57 -0800)]
Merge tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
Linus Torvalds [Fri, 10 Nov 2023 19:44:38 +0000 (11:44 -0800)]
Merge tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
Linus Torvalds [Fri, 10 Nov 2023 19:40:38 +0000 (11:40 -0800)]
Merge tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
Linus Torvalds [Fri, 10 Nov 2023 19:34:16 +0000 (11:34 -0800)]
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
Linus Torvalds [Fri, 10 Nov 2023 19:25:58 +0000 (11:25 -0800)]
Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Mostly just a few fixes and cleanups caused by the read multishot
support.
Outside of that, a stable fix for how a connect retry is done"
* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
io_uring: do not clamp read length for multishot read
io_uring: do not allow multishot read to set addr or len
io_uring: indicate if io_kbuf_recycle did recycle anything
io_uring/rw: add separate prep handler for fixed read/write
io_uring/rw: add separate prep handler for readv/writev
io_uring/net: ensure socket is marked connected on connect retry
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
projects / users / jedix / linux-maple.git / log