perf bench mem: Remove repetition around time measurement
We have two copies of each mem benchmark: one using cycles to
measure time, the second for gettimeofday().
Unify.
Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test attr: Add missing int_mist.uop_dropping event to test-stat files
Setup 'struct perf_event_attr' test was failing on EMR cpu because 'perf
stat' was providing an event that was not included in the test. Type 4
Config 4269 or 10ad, int_misc.uop_dropping.
Add event type=4 config=4269 to test-stat-default and
test-stat-detailed-* files with optional=1 so EMR (Emerald Rapids)
machines can pass the test.
Fixes: d9a6bb9e359e6f81 ("perf vendor events: Update emeraldrapids events/metrics") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Trevor Allison <tallison@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. The volume became higher than wished, but
nothing really stands out -- all small, nice and smooth.
A slightly large change is found in qcom USB-audio offload stuff, but
this is a regression fix specific to this device, hence it should be
safe to apply at this late stage.
- Various small fixes for ASoC Cirrus, Realtek, lpass, Intel and
Qualcomm drivers
- ASoC SoundWire fixes
- A few TAS2781 HD-audio side-codec driver fixes
- A fix for Qualcomm USB-audio offload breakage
- Usual a few HD-audio quirks"
* tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: Fix mute led for HP Laptop 15-dw4xx
ALSA: hda: intel-dsp-config: Prevent SEGFAULT if ACPI_HANDLE() is NULL
ALSA: usb: qcom: Fix false-positive address space check
ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue
ASoC: Intel: PTL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: amd: acp: Fix incorrect retrival of acp_chip_info
ASoC: Intel: sof_sdw: use PRODUCT_FAMILY for Fatcat series
ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275
ALSA: hda/realtek: Fix volume control on Lenovo Thinkbook 13x Gen 4
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 5
ALSA: hda/realtek: Add ALC295 Dell TAS2781 I2C fixup
ALSA: hda/tas2781: Fix a potential race condition that causes a NULL pointer in case no efi.get_variable exsits
ASoC: qcom: sc8280xp: Enable DAI format configuration for MI2S interfaces
ASoC: qcom: q6apm-lpass-dais: Fix missing set_fmt DAI op for I2S
ASoC: qcom: audioreach: Fix lpaif_type configuration for the I2S interface
ASoC: Intel: catpt: Expose correct bit depth to userspace
ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data
ASoC: codecs: lpass-wsa-macro: Fix speaker quality distortion
ASoC: codecs: lpass-rx-macro: Fix playback quality distortion
...
Ian Rogers [Thu, 21 Aug 2025 22:18:31 +0000 (15:18 -0700)]
perf test shell lbr: Avoid failures with perf event paranoia
When not running as root and with higher perf event paranoia values
the perf record LBR tests could fail rather than skipping the
problematic tests.
Add the sensitivity to the test and confirm it passes with paranoia
values from -1 to 2.
Committer testing:
Testing with '$ perf test -vv lbr', i.e. as non root, and then comparing
the output shows the mentioned errors before this patch:
acme@x1:~$ grep -m1 "model name" /proc/cpuinfo
model name : 13th Gen Intel(R) Core(TM) i7-1365U
acme@x1:~$
Before:
132: perf record LBR tests : Skip
After:
132: perf record LBR tests : Ok
Fixes: 32559b99e0f59070 ("perf test: Add set of perf record LBR tests") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 8 Aug 2025 22:26:50 +0000 (15:26 -0700)]
perf tools: Remove a pointless check
Static analyser cppcheck says:
linux-6.16/tools/perf/util/tool_pmu.c:242:15: warning:
Opposite inner 'if' condition leads to a dead code block. [oppositeInnerCondition]
Source code is:
for (thread = 0; thread < nthreads; thread++) {
if (thread >= nthreads)
break;
Reported-by: David Binderman <dcb314@hotmail.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 14 Aug 2025 11:49:08 +0000 (17:19 +0530)]
perf tests record: Update testcase to fix usage of affinity for machines with #CPUs > 1K
The perf record testcase fails on systems with more than 1K CPUs.
Testcase: perf test -vv "PERF_RECORD_* events & perf_sample fields"
PERF_RECORD_* events & perf_sample fields :
--- start ---
test child forked, pid 272482
sched_getaffinity: Invalid argument
sched__get_first_possible_cpu: Invalid argument
test child finished with -1
---- end ----
PERF_RECORD_* events & perf_sample fields: FAILED!
sched__get_first_possible_cpu uses "sched_getaffinity" to get the
cpumask and this call is returning EINVAL (Invalid argument).
This happens because the default mask size in glibc is 1024.
To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the
mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate
cpumask, CPU_ALLOC_SIZE for size.
Same fix needed for mask which is used to setaffinity so that mask size
is large enough to represent number of possible CPU's in the system.
Reported-by: Tejas Manhas <tejas05@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zecheng Li [Mon, 25 Aug 2025 19:54:05 +0000 (19:54 +0000)]
perf dwarf-aux: Better variable collection for insn tracking
Utilizes the previous is_breg_access_indirect function to determine if
the register + offset stores the variable itself or the struct it points
to, save the information in die_var_type.is_reg_var_addr.
Since we are storing the real types in the stack state, we need to do a
type dereference when is_reg_var_addr is set to false for stack/frame
registers.
For other gp registers, skip the variable when the register is a pointer
to the type. If we want to accept these variables, we might also utilize
is_reg_var_addr in a different way, we need to mark that register as a
pointer to the type.
Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zecheng Li <zecheng@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xu Liu <xliuprof@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zecheng Li [Mon, 25 Aug 2025 19:54:04 +0000 (19:54 +0000)]
perf dwarf-aux: More accurate variable type match for breg
Introduces the function is_breg_access_indirect to determine whether a
memory access involving a DW_OP_breg* operation refers to the variable's
value directly or requires dereferencing the variable's type as a
pointer based on the DWARF expression.
Previously, all breg based accesses were assumed to directly access the
variable's value (is_pointer = false).
The is_breg_access_indirect function handles three cases:
1. Base register + offset only: (e.g., DW_OP_breg7 RSP+88) The
calculated address is the location of the variable. The access is
direct, so no type dereference is needed. Returns false.
2. Base register + offset, followed by other operations ending in
DW_OP_stack_value, including DW_OP_deref: (e.g., DW_OP_breg*,
DW_OP_deref, DW_OP_stack_value) The DWARF expression computes the
variable's value, but that value requires a dereference. The memory
access is fetching that value, so no type dereference is needed.
Returns false.
3. Base register + offset, followed only by DW_OP_stack_value: (e.g.,
DW_OP_breg13 R13+256, DW_OP_stack_value) This indicates the value at
the base + offset is the variable's value. Since this value is being
used as an address in the memory access, the variable's type is
treated as a pointer and requires a type dereference. Returns true.
The is_pointer argument passed to match_var_offset is now set by
is_breg_access_indirect for breg accesses.
There are more complex expressions that includes multiple operations and
may require additional handling, such as DW_OP_deref without a
DW_OP_stack_value, or including multiple base registers. They are less
common in the Linux kernel dwarf and are skipped in check_allowed_ops.
Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Zecheng Li <zecheng@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xu Liu <xliuprof@google.com> Link: https://lore.kernel.org/r/CAJUgMyK2wTiEZB__dtgCELmaNGFWhG1j0g9rv_C=cLD6Zq4_5w@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gautam Menghani [Mon, 4 Aug 2025 11:06:01 +0000 (16:36 +0530)]
perf auxtrace: Avoid redundant NULL check in auxtrace_mmap_params__set_idx()
Since commit eead8a011477 ("libperf threadmap: Don't segv for index 0 for the
NULL 'struct perf_thread_map' pointer"), perf_thread_map__pid() can
check for a NULL map and return -1 if idx is 0. Cleanup
auxtrace_mmap_params__set_idx() and remove the redundant NULL check.
No functional change intended.
Reviewed-by: Aditya Bodkhe <adityab1@linux.ibm.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com> Signed-off-by: Gautam Menghani <gautam@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ilkka Koskinen [Wed, 10 Sep 2025 19:52:13 +0000 (12:52 -0700)]
perf vendor events arm64 AmpereOne: Fix typos in metrics' descriptions
While fixing a typo in "l1d_cache_access_prefetches" in AmpereOneX,
a few other typos were found in metrics' descriptions too. While AmpereOne
doesn't have the metric, it did have the typos in the descriptions.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250910195214.50814-3-ilkka@os.amperecomputing.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ilkka Koskinen [Wed, 10 Sep 2025 19:52:12 +0000 (12:52 -0700)]
perf vendor events arm64 AmpereOneX: Fix typo - should be l1d_cache_access_prefetches
Add missing 'h' to l1d_cache_access_prefetces
Also fix a couple of typos and use consistent term in brief descriptions
Fixes: 16438b652b464ef7 ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 21 Aug 2025 00:32:20 +0000 (17:32 -0700)]
perf trace: Add --max-summary option
The --max-summary option is to limit the number of output lines for
syscall summary stats. The max applies to each entries like thread and
cgroups. For total summary, it will just print up to the given number.
Reviewed-by: Howard Chu <howardchu95@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:19 +0000 (16:42 +0100)]
perf arm_spe: Allow parsing both data source and events
Current code skips to parse events after generating data source. The
reason is the data source packets have cache and snooping related info,
the afterwards event packets might contain duplicate info.
This commit changes to continue parsing the events after data source
analysis. If data source does not give out memory level and snooping
types, then the event info is used to synthesize the related fields.
As a result, both the peer snoop option ('-d peer') and hitm options
('-d tot/lcl/rmt') are supported by Arm SPE in 'perf c2c'.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:18 +0000 (16:42 +0100)]
perf arm_spe: Set HITM flag
Since FEAT_SPEv1p4, Arm SPE provides two extra events: "Cache data
modified" and "Data snooped".
Set the snoop mode as:
- If both the "Cache data modified" event and the "Data snooped" event
are set, which indicates a load operation that snooped from a outside
cache and hit a modified copy, set the HITM flag to inspect false
sharing.
- If the snooped event bit is not set, and the snooped event has been
supported by the hardware, set as NONE mode (no snoop operation).
- If the snooped event bit is not set, and the event is not supported or
absent the events info in the meta data, set as NA mode (not
available).
Don't set any mode for only "Cache data modified" event, as it hits a
local modified copy.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle "CPU=-1" (per-thread mode) in the arm_spe__get_metadata_by_cpu()
function. As a result, the function is more general and will be invoked
by a sequential change.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:16 +0000 (16:42 +0100)]
perf arm_spe: Fill memory levels for FEAT_SPEv1p4
Starting with FEAT_SPEv1p4, Arm SPE provides information on Level 2 data
cache and recently fetched events. This patch fills in the memory levels
for these new events.
The recently fetched events are matched to line-fill buffer (LFB). In
general, the latency for accessing LFB is higher than accessing L1 cache
but lower than accessing L2 cache. Thus, it locates in the memory
hierarchy information between L1 cache and L2 cache.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:15 +0000 (16:42 +0100)]
perf arm_spe: Separate setting of memory levels for loads and stores
For a load hit, the lowest-level cache reflects the latency of fetching
a data. Otherwise, the highest-level cache involved in refilling
indicates the overhead caused by a load.
Store operations remain unchanged to keep the descending order when
iterating through cache levels.
Split into two functions: one is for setting memory levels for loads and
another for stores.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:14 +0000 (16:42 +0100)]
perf arm_spe: Refine memory level filling
This commit introduces macros for detecting cache level and cache miss.
Populates the 'mem_lvl_num' field which is a later added attribute for
representing memory level. Set NA ("not available") to memory levels if
memory hierarchy info is absent.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:13 +0000 (16:42 +0100)]
perf arm_spe: Add "event_filter" entry in meta data
Add a new "event_filter" entry in the meta data and dump it in raw data
mode.
After:
# perf script -D
...
0 0 0x470 [0x1f0]: PERF_RECORD_AUXTRACE_INFO type: 4
Header version :2
Header size :4
PMU type v2 :11
CPU number :8
Magic :0x1010101010101010
CPU # :0
Num of params :4
MIDR :0x410fd0f0
PMU Type :11
Min Interval :256
Event Filter :0x3fe08fe
...
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:12 +0000 (16:42 +0100)]
perf arm_spe: Decode event types for new features
Decode new event types introduced by FEAT_SPEv1p4, FEAT_SPE_SME and
FEAT_SPE_SME.
The printed event names don't strictly follow the naming in the Arm ARM.
For example, the "Cache data modified" event is shown as "HITM", and the
"Data snooped" event is printed as "SNOOPED". Shorter names are easier
to read while preserving core meanings.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:11 +0000 (16:42 +0100)]
perf arm_spe: Directly propagate raw event
Two sets of event bits are defined: one for generating samples and
another are raw event bits used in the backend decoder. Reduce the
redundancy by using the raw event bits directly in the frontend code.
To avoid overflow issues, change the type of the event variable from
enum to u64.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Fri, 12 Sep 2025 15:42:10 +0000 (16:42 +0100)]
perf arm_spe: Use full type for data_src
data_src has an actual type rather than just being a u64. To help
readers, delay decomposing it to a u64 until it's finally assigned to
the sample.
Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:09 +0000 (16:42 +0100)]
perf arm_spe: Correct memory level for remote access
For remote accesses, the data source packet does not contain information
about the memory level. To avoid misinformation, set the memory level to
NA (Not Available).
Fixes: 4e6430cbb1a9f1dc ("perf arm-spe: Use SPE data source for neoverse cores") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Fri, 12 Sep 2025 15:42:08 +0000 (16:42 +0100)]
perf arm_spe: Correct setting remote access
Set the mem_remote field for a remote access to appropriately represent
the event.
Fixes: a89dbc9b988f3ba8 ("perf arm-spe: Set sample's data source field") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm, it's a bit busier than I'd like on the xe side
this week, but otherwise amdgpu and some smaller fixes for i915/bridge
and a revert on docs.
docs:
- fix docs build regression
i915:
- Honor VESA eDP backlight luminance control capability
bridge:
- anx7625: Fix NULL pointer dereference with early IRQ
- cdns-mhdp8546: Fix missing mutex unlock on error path
xe:
- Release kobject for the failure path
- SRIOV PF: Drop rounddown_pow_of_two fair
- Remove type casting on hwmon
- Defer free of NVM auxiliary container to device release
- Fix a NULL vs IS_ERR
- Add cleanup action in xe_device_sysfs_init
- Fix error handling if PXP fails to start
- Set GuC RCS/CCS yield policy
amdgpu:
- GC 11.0.1/4 cleaner shader support
- DC irq fix
- OD fix
amdkfd:
- S0ix fix"
* tag 'drm-fixes-2025-09-19' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: suspend KFD and KGD user queues for S0ix
drm/amdkfd: add proper handling for S0ix
drm/xe/guc: Set RCS/CCS yield policy
drm/xe: Fix error handling if PXP fails to start
drm/xe/sysfs: Add cleanup action in xe_device_sysfs_init
drm/amd: Only restore cached manual clock settings in restore if OD enabled
drm/xe: Fix a NULL vs IS_ERR() in xe_vm_add_compute_exec_queue()
drm: bridge: cdns-mhdp8546: Fix missing mutex unlock on error path
drm/i915/backlight: Honor VESA eDP backlight luminance control capability
drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/put
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.0.1/11.0.4 GPUs
drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ
drm/xe: defer free of NVM auxiliary container to device release callback
drm/xe/hwmon: Remove type casting
drm/xe/pf: Drop rounddown_pow_of_two fair LMEM limitation
drm/xe/tile: Release kobject for the failure path
Revert "drm: Add directive to format code in comment"
Dave Airlie [Fri, 19 Sep 2025 01:19:36 +0000 (11:19 +1000)]
Merge tag 'drm-xe-fixes-2025-09-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release kobject for the failure path (Shuicheng)
- SRIOV PF: Drop rounddown_pow_of_two fair (Michal)
- Remove type casting on hwmon (Mallesh)
- Defer free of NVM auxiliary container to device release (Nitin)
- Fix a NULL vs IS_ERR (Dan)
- Add cleanup action in xe_device_sysfs_init (Zongyao)
- Fix error handling if PXP fails to start (Daniele)
- Set GuC RCS/CCS yield policy (Daniele)
Merge tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix build in some RISC-V flavours
Some system calls only are available for the 64bit RISC-V machines.
#ifdef out the cases of clock_nanosleep and futex in the sleep
monitor if they are not supported by the architecture.
- Fix wrong cast, obsolete after refactoring
Use container_of() to get to the rv_monitor structure from the
enable_monitors_next() 'p' pointer. The assignment worked only
because the list field used happened to be the first field of the
structure.
- Remove redundant include files
Some include files were listed twice. Remove the extra ones and sort
the includes.
- Fix missing unlock on failure
There was an error path that exited the rv_register_monitor()
function without releasing a lock. Change that to goto the lock
release.
- Add Gabriele Monaco to be Runtime Verifier maintainer
Gabriele is doing most of the work on RV as well as collecting
patches. Add him to the maintainers file for Runtime Verification.
* tag 'trace-rv-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Add Gabriele Monaco as maintainer for Runtime Verification
rv: Fix missing mutex unlock in rv_register_monitor()
include/linux/rv.h: remove redundant include file
rv: Fix wrong type cast in enabled_monitors_next()
rv: Support systems with time64-only syscalls
Alex Deucher [Wed, 17 Sep 2025 16:42:11 +0000 (12:42 -0400)]
drm/amdgpu: suspend KFD and KGD user queues for S0ix
We need to make sure the user queues are preempted so
GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8b367e6fa1716cab7cc232b9e3dff29187fc99d) Cc: stable@vger.kernel.org
Alex Deucher [Wed, 17 Sep 2025 16:42:09 +0000 (12:42 -0400)]
drm/amdkfd: add proper handling for S0ix
When in S0i3, the GFX state is retained, so all we need to do
is stop the runlist so GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Tested-by: David Perry <david.perry@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4bfa8609934dbf39bbe6e75b4f971469384b50b1) Cc: stable@vger.kernel.org
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"These are mostly Oliver's Arm changes: lock ordering fixes for the
vGIC, and reverts for a buggy attempt to avoid RCU stalls on large
VMs.
Arm:
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly
programming at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding
scenarios where an xarray's spinlock was nested with a *raw*
spinlock
- Permit stage-2 read permission aborts which are possible in the
case of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
- Reverted a couple of fixes for RCU stalls when destroying a stage-2
page table.
There appears to be some nasty refcounting / UAF issues lurking in
those patches and the band-aid we tried to apply didn't hold.
s390:
- mm fixes, including userfaultfd bug fix
x86:
- Sync the vTPR from the local APIC to the VMCB even when AVIC is
active.
This fixes a bug where host updates to the vTPR, e.g. via
KVM_SET_LAPIC or emulation of a guest access, are lost and result
in interrupt delivery issues in the guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active
Revert "KVM: arm64: Split kvm_pgtable_stage2_destroy()"
Revert "KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables"
KVM: arm64: vgic: fix incorrect spinlock API usage
KVM: arm64: Remove stage 2 read fault check
KVM: arm64: Fix parameter ordering for VBAR_EL1 assignment
KVM: arm64: nv: Fix incorrect VNCR invalidation range calculation
KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take LPI xarray lock
KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock
KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks
KVM: arm64: Spin off release helper from vgic_put_irq()
KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs
KVM: arm64: vgic: Drop stale comment on IRQ active state
KVM: arm64: VHE: Save and restore host MDCR_EL2 value correctly
KVM: arm64: Initialize PMSCR_EL1 when in VHE
KVM: arm64: nv: fix VNCR TLB ASID match logic for non-Global entries
KVM: s390: Fix FOLL_*/FAULT_FLAG_* confusion
KVM: s390: Fix incorrect usage of mmu_notifier_register()
KVM: s390: Fix access to unavailable adapter indicator pages during postcopy
KVM: arm64: Mark freed S2 MMUs as invalid
Merge tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
- amd/pmf: Support new ACPI ID AMDI0108
- asus-wmi: Re-add extra keys to ignore_key_wlan quirk
- oxpec: Add support for AOKZOE A1X and OneXPlayer X1Pro EVA-02"
* tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
platform/x86/amd/pmf: Support new ACPI ID AMDI0108
platform/x86: oxpec: Add support for AOKZOE A1X
platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
Merge tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
"A few fixes for UML, which I'd meant to send earlier but then forgot.
All of them are pretty long-standing issues that are either not really
happening (the UAF), in rarely used code (the FD buffer issue), or an
issue only for some host configurations (the executable stack):
- mark stack not executable to work on more modern systems with
selinux
* tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Fix FD copy size in os_rcv_fd_msg()
um: virtio_uml: Fix use-after-free after put_device in probe
um: Don't mark stack executable
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
devlink rate: Remove unnecessary 'static' from a couple places
devlink_rate_node_get_by_name() and devlink_rate_nodes_destroy() have a
couple of unnecessary static variables for iterating over devlink rates.
This could lead to races/corruption/unhappiness if two concurrent
operations execute the same function.
Remove 'static' from both. It's amazing this was missed for 4+ years.
While at it, I confirmed there are no more examples of this mistake in
net/ with 1, 2 or 3 levels of indentation.
net: liquidio: fix overflow in octeon_init_instr_queue()
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/20250910170011.70528106@kernel.org Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 Sep 2025 00:28:13 +0000 (17:28 -0700)]
tls: make sure to abort the stream if headers are bogus
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover.
Reported-by: Lee Jones <lee@kernel.org> Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250917002814.1743558-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 11 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 13 of these
fixes are for MM.
The usual shower of singletons, plus
- fixes from Hugh to address various misbehaviors in get_user_pages()
- patches from SeongJae to address a quite severe issue in DAMON
- another series also from SeongJae which completes some fixes for a
DAMON startup issue"
* tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zram: fix slot write race condition
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
samples/damon/mtier: avoid starting DAMON before initialization
samples/damon/prcl: avoid starting DAMON before initialization
samples/damon/wsse: avoid starting DAMON before initialization
MAINTAINERS: add Lance Yang as a THP reviewer
MAINTAINERS: add Jann Horn as rmap reviewer
mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control
mm/damon/core: introduce damon_call_control->dealloc_on_cancel
mm: folio_may_be_lru_cached() unless folio_test_large()
mm: revert "mm: vmscan.c: fix OOM on swap stress test"
mm: revert "mm/gup: clear the LRU flag of a page before adding to LRU batch"
mm/gup: local lru_add_drain() to avoid lru_add_drain_all()
mm/gup: check ref_count instead of lru before migration
Merge tag '6.17-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Two fixes for remaining_data_length and offset checks in receive path
- Don't go over max SGEs which caused smbdirect send to fail (and
trigger disconnect)
* tag '6.17-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size
ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer
smb: server: let smb_direct_writev() respect SMB_DIRECT_MAX_SEND_SGES
All recent platforms (including all the ones officially supported by the
Xe driver) do not allow concurrent execution of RCS and CCS workloads
from different address spaces, with the HW blocking the context switch
when it detects such a scenario.
The DUAL_QUEUE flag helps with this, by causing the GuC to not submit a
context it knows will not be able to execute. This, however, causes a new
problem: if RCS and CCS queues have pending workloads from different
address spaces, the GuC needs to choose from which of the 2 queues to
pick the next workload to execute. By default, the GuC prioritizes RCS
submissions over CCS ones, which can lead to CCS workloads being
significantly (or completely) starved of execution time.
The driver can tune this by setting a dedicated scheduling policy KLV;
this KLV allows the driver to specify a quantum (in ms) and a ratio
(percentage value between 0 and 100), and the GuC will prioritize the CCS
for that percentage of each quantum.
Given that we want to guarantee enough RCS throughput to avoid missing
frames, we set the yield policy to 20% of each 80ms interval.
v2: updated quantum and ratio, improved comment, use xe_guc_submit_disable
in gt_sanitize
Fixes: d9a1ae0d17bd ("drm/xe/guc: Enable WA_DUAL_QUEUE for newer platforms") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20250905235632.3333247-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 88434448438e4302e272b2a2b810b42e05ea024b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added #include "xe_guc_submit.h" while backporting]
Merge tag 'probes-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fix from Masami Hiramatsu:
- kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal(),
by handling NULL return of kmemdup() correctly
* tag 'probes-fixes-v6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe-event: Fix null-ptr-deref in trace_kprobe_create_internal()
For ice:
Jake resolves leaking pages with multi-buffer frames when a 0-sized
descriptor is encountered.
For i40e:
Maciej removes a redundant, and incorrect, memory barrier.
For ixgbe:
Jedrzej adjusts lifespan of ACI lock to ensure uses are while it is
valid.
For igc:
Kohei Enju does not fail probe on LED setup failure which resolves a
kernel panic in the cleanup path, if we were to fail.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: don't fail igc_probe() on LED setup error
ixgbe: destroy aci.lock later within ixgbe_remove path
ixgbe: initialize aci.lock before it's used
i40e: remove redundant memory barrier when cleaning Tx descs
ice: fix Rx page leak on multi-buffer frames
====================
Jakub Kicinski [Wed, 17 Sep 2025 23:12:46 +0000 (16:12 -0700)]
Merge tag 'wireless-2025-09-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just two fixes:
- fix crash in rfkill due to uninitialized type_name
- fix aggregation in iwlwifi 7000/8000 devices
* tag 'wireless-2025-09-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
wifi: iwlwifi: pcie: fix byte count table for some devices
====================
The test reproduces the scenario explained in the previous patch.
Without the patch, the test triggers the warning and cannot see the last
retransmitted packet.
# ./ksft_runner.sh tcp_fastopen_server_reset-after-disconnect.pkt
TAP version 13
1..2
[ 29.229250] ------------[ cut here ]------------
[ 29.231414] WARNING: CPU: 26 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer+0x32/0x9f0
...
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 1 ipv4
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 2 ipv6
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
Fixes: 8336886f786f ("tcp: TCP Fast Open Server - support TFO listeners") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250915175800.118793-2-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, VF MAC address info is not updated when the MAC address is
configured from VF, and it is not cleared when the VF is removed. This
leads to stale or missing MAC information in the PF, which may cause
incorrect state tracking or inconsistencies when VFs are hot-plugged
or reassigned.
Fix this by:
- storing the VF MAC address in the PF when it is set from VF
- clearing the stored VF MAC address when the VF is removed
This ensures that the PF always has correct VF MAC state.
Fixes: cde29af9e68e ("octeon_ep: add PF-VF mailbox communication") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250916133207.21737-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Tue, 16 Sep 2025 08:01:26 +0000 (08:01 +0000)]
bonding: don't set oif to bond dev when getting NS target destination
Unlike IPv4, IPv6 routing strictly requires the source address to be valid
on the outgoing interface. If the NS target is set to a remote VLAN interface,
and the source address is also configured on a VLAN over a bond interface,
setting the oif to the bond device will fail to retrieve the correct
destination route.
Fix this by not setting the oif to the bond device when retrieving the NS
target destination. This allows the correct destination device (the VLAN
interface) to be determined, so that bond_verify_device_path can return the
proper VLAN tags for sending NS messages.
Reported-by: David Wilder <wilder@us.ibm.com> Closes: https://lore.kernel.org/netdev/aGOKggdfjv0cApTO@fedora/ Suggested-by: Jay Vosburgh <jv@jvosburgh.net> Tested-by: David Wilder <wilder@us.ibm.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250916080127.430626-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'cgroup-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains two cgroup changes. Both are pretty low risk.
- Fix deadlock in cgroup destruction when repeatedly
mounting/unmounting perf_event and net_prio controllers.
The issue occurs because cgroup_destroy_wq has max_active=1, causing
root destruction to wait for CSS offline operations that are queued
behind it.
The fix splits cgroup_destroy_wq into three separate workqueues to
eliminate the blocking.
- Set of->priv to NULL upon file release to make potential bugs to
manifest as NULL pointer dereferences rather than use-after-free
errors"
* tag 'cgroup-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/psi: Set of->priv to NULL upon file release
cgroup: split cgroup_destroy_wq into 3 workqueues
Paolo Bonzini [Wed, 17 Sep 2025 17:45:02 +0000 (19:45 +0200)]
Merge tag 'kvm-x86-fixes-6.17-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fix for 6.17-rcN
Sync the vTPR from the local APIC to the VMCB even when AVIC is active, to fix
a bug where host updates to the vTPR, e.g. via KVM_SET_LAPIC or emulation of a
guest access, effectively get lost and result in interrupt delivery issues in
the guest.
Since the PXP start comes after __xe_exec_queue_init() has completed,
we need to cleanup what was done in that function in case of a PXP
start error.
__xe_exec_queue_init calls the submission backend init() function,
so we need to introduce an opposite for that. Unfortunately, while
we already have a fini() function pointer, it performs other
operations in addition to cleaning up what was done by the init().
Therefore, for clarity, the existing fini() has been renamed to
destroy(), while a new fini() has been added to only clean up what was
done by the init(), with the latter being called by the former (via
xe_exec_queue_fini).
Fixes: 72d479601d67 ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://lore.kernel.org/r/20250909221240.3711023-3-daniele.ceraolospurio@intel.com
(cherry picked from commit 626667321deb4c7a294725406faa3dd71c3d445d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Zongyao Bai [Mon, 15 Sep 2025 21:47:15 +0000 (05:47 +0800)]
drm/xe/sysfs: Add cleanup action in xe_device_sysfs_init
On partial failure, some sysfs files created before the failure might
not be removed. Add common cleanup step to remove them all immediately,
as is should be harmless to attempt to remove non-existing files.
Fixes: 0e414bf7ad01 ("drm/xe: Expose PCIe link downgrade attributes") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Shuicheng Lin <shuicheng.lin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Zongyao Bai <zongyao.bai@intel.com> Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250915214716.1327379-2-zongyao.bai@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1a869168d91f1a1a2b0db22cea0295c67908e5d8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Richard Fitzgerald [Wed, 17 Sep 2025 16:06:09 +0000 (17:06 +0100)]
ALSA: hda: intel-dsp-config: Prevent SEGFAULT if ACPI_HANDLE() is NULL
Check in snd_intel_dsp_check_soundwire() that the pointer returned by
ACPI_HANDLE() is not NULL, before passing it on to other functions.
The original code assumed a non-NULL return, but if it was unexpectedly
NULL it would end up passed to acpi_walk_namespace() as the start
point, and would result in
This problem was triggered by a bugged DSDT that the kernel couldn't parse.
But it shouldn't be possible to SEGFAULT the kernel just because of some
bugs in ACPI.
Fixes: 0650857570d1 ("ALSA: hda: add autodetection for SoundWire") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge tag 'for-6.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix integer overflow in dm-stripe
- limit tag size in dm-integrity to 255 bytes
- fix 'alignment inconsistency' warning in dm-raid
* tag 'for-6.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: don't set io_min and io_opt for raid1
dm-integrity: limit MAX_TAG_SIZE to 255
dm-stripe: fix a possible integer overflow
Merge tag 'for-6.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in zoned mode, turn assertion to proper code when reserving space in
relocation block group
- fix search key of extended ref (hardlink) when replaying log
- fix initialization of file extent tree on filesystems without
no-holes feature
- add harmless data race annotation to block group comparator
* tag 'for-6.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: annotate block group access with data_race() when sorting for reclaim
btrfs: initialize inode::file_extent_tree after i_mode has been set
btrfs: zoned: fix incorrect ASSERT in btrfs_zoned_reserve_data_reloc_bg()
btrfs: fix invalid extref key setup when replaying dentry
ALSA: usb: qcom: Fix false-positive address space check
The sanity check previously added to uaudio_transfer_buffer_setup()
assumed the allocated buffer being linear-mapped. But the buffer
allocated via usb_alloc_coherent() isn't always so, rather to be used
with (SG-)DMA API. This leaded to a false-positive warning and the
driver failed to work.
Actually uaudio_transfer_buffer_setup() deals only with the DMA-API
addresses for MEM_XFER_BUF type, while other callers of
uaudio_iommu_map() are with pages with physical addresses for
MEM_EVENT_RING and MEM_XFER_RING types. So this patch splits the
mapping helper function to two different ones, uaudio_iommu_map() for
the DMA pages and uaudio_iommu_map_pa() for the latter, in order to
handle mapping differently for each type. Along with it, the
unnecessary address check that caused probe error is dropped, too.
Hans de Goede [Sat, 13 Sep 2025 11:35:15 +0000 (13:35 +0200)]
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sched_ext, sched/core: Fix build failure when !FAIR_GROUP_SCHED && EXT_GROUP_SCHED
While collecting SCX related fields in struct task_group into struct
scx_task_group, 6e6558a6bc41 ("sched_ext, sched/core: Factor out struct
scx_task_group") forgot update tg->scx_weight usage in tg_weight(), which
leads to build failure when CONFIG_FAIR_GROUP_SCHED is disabled but
CONFIG_EXT_GROUP_SCHED is enabled. Fix it.
Fixes: 6e6558a6bc41 ("sched_ext, sched/core: Factor out struct scx_task_group") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509170230.MwZsJSWa-lkp@intel.com/ Tested-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Lama Kayal [Mon, 15 Sep 2025 12:24:34 +0000 (15:24 +0300)]
net/mlx5e: Add a miss level for ipsec crypto offload
The cited commit adds a miss table for switchdev mode. But it
uses the same level as policy table. Will hit the following error
when running command:
# ip xfrm state add src 192.168.1.22 dst 192.168.1.21 proto \
esp spi 1001 reqid 10001 aead 'rfc4106(gcm(aes))' \
0x3a189a7f9374955d3817886c8587f1da3df387ff 128 \
mode tunnel offload dev enp8s0f0 dir in
Error: mlx5_core: Device failed to offload this state.
The dmesg error is:
mlx5_core 0000:03:00.0: ipsec_miss_create:578:(pid 311797): fail to create IPsec miss_rule err=-22
Fix it by adding a new miss level to avoid the error.
Fixes: 7d9e292ecd67 ("net/mlx5e: Move IPSec policy check after decryption") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Lama Kayal <lkayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1757939074-617281-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianbo Liu [Mon, 15 Sep 2025 12:24:32 +0000 (15:24 +0300)]
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 15 Sep 2025 23:42:55 +0000 (16:42 -0700)]
MAINTAINERS: make the DPLL entry cover drivers
DPLL maintainers should probably be CCed on driver patches, too.
Remove the *, which makes the pattern only match files directly
under drivers/dpll but not its sub-directories.
I'm trying to generate Rust bindings for netlink using the yaml spec.
It looks like there's a typo in conntrack spec: attribute set conntrack-attrs
defines attributes "counters-{orig,reply}" (plural), while get operation
references "counter-{orig,reply}" (singular). The latter should be fixed, as it
denotes multiple counters (packet and byte). The corresonding C define is
CTA_COUNTERS_ORIG.
Also, dump request references "nfgen-family" attribute, which neither exists in
conntrack-attrs attrset nor ctattr_type enum. There's member of nfgenmsg struct
with the same name, which is where family value is actually taken from.
Merge tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A small set of fixes for crashes in different commands and conditions"
* tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf maps: Ensure kmap is set up for all inserts
perf lock: Provide a host_env for session new
perf subcmd: avoid crash in exclude_cmds when excludes is empty
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe: destroy aci.lock later within ixgbe_remove path
There's another issue with aci.lock and previous patch uncovers it.
aci.lock is being destroyed during removing ixgbe while some of the
ixgbe closing routines are still ongoing. These routines use Admin
Command Interface which require taking aci.lock which has been already
destroyed what leads to call trace.
Same as for the previous commit, the issue has been highlighted by the
commit 337369f8ce9e ("locking/mutex: Add MUTEX_WARN_ON() into fast path").
Move destroying aci.lock to the end of ixgbe_remove(), as this
simply fixes the issue.
Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move aci.lock mutex initialization to ixgbe_sw_init() before any ACI
command is sent. Along with that move also related SWFW semaphore in
order to reduce size of ixgbe_probe() and that way all locks are
initialized in ixgbe_sw_init().
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device") Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Maciej Fijalkowski [Fri, 22 Aug 2025 15:16:17 +0000 (17:16 +0200)]
i40e: remove redundant memory barrier when cleaning Tx descs
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba9507 ("i40e/i40evf: enable hardware feature head write back") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Mon, 25 Aug 2025 23:00:14 +0000 (16:00 -0700)]
ice: fix Rx page leak on multi-buffer frames
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring.
Cc: Christoph Petrausch <christoph.petrausch@deepl.com> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Closes: https://lore.kernel.org/netdev/CAK8fFZ4hY6GUJNENz3wY9jaYLZXGfpr7dnZxzGMYoE44caRbgw@mail.gmail.com/ Fixes: 743bbd93cf29 ("ice: put Rx buffers after being done with current frame") Tested-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Tested-by: Priya Singh <priyax.singh@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Andrea Righi [Fri, 12 Sep 2025 16:14:38 +0000 (18:14 +0200)]
Revert "sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()"
scx_bpf_reenqueue_local() can be called from ops.cpu_release() when a
CPU is taken by a higher scheduling class to give tasks queued to the
CPU's local DSQ a chance to be migrated somewhere else, instead of
waiting indefinitely for that CPU to become available again.
In doing so, we decided to skip migration-disabled tasks, under the
assumption that they cannot be migrated anyway.
However, when a higher scheduling class preempts a CPU, the running task
is always inserted at the head of the local DSQ as a migration-disabled
task. This means it is always skipped by scx_bpf_reenqueue_local(), and
ends up being confined to the same CPU even if that CPU is heavily
contended by other higher scheduling class tasks.
As an example, let's consider the following scenario:
The first task (SCHED_EXT) can run on CPU0 or CPU1. The second task
(SCHED_FIFO) is pinned to CPU0 and consumes ~99% of it. If the SCHED_EXT
task initially runs on CPU0, it will remain there because it always sees
CPU0 as "idle" in the short gaps left by the RT task, resulting in ~1%
utilization while CPU1 stays idle:
0[||||||||||||||||||||||100.0%] 8[ 0.0%]
1[ 0.0%] 9[ 0.0%]
2[ 0.0%] 10[ 0.0%]
3[ 0.0%] 11[ 0.0%]
4[ 0.0%] 12[ 0.0%]
5[ 0.0%] 13[ 0.0%]
6[ 0.0%] 14[ 0.0%]
7[ 0.0%] 15[ 0.0%]
PID USER PRI NI S CPU CPU%▽MEM% TIME+ Command
1067 root RT 0 R 0 99.0 0.2 0:31.16 stress-ng-cpu [run]
975 arighi 20 0 R 0 1.0 0.0 0:26.32 yes
By allowing scx_bpf_reenqueue_local() to re-enqueue migration-disabled
tasks, the scheduler can choose to migrate them to other CPUs (CPU1 in
this case) via ops.enqueue(), leading to better CPU utilization:
0[||||||||||||||||||||||100.0%] 8[ 0.0%]
1[||||||||||||||||||||||100.0%] 9[ 0.0%]
2[ 0.0%] 10[ 0.0%]
3[ 0.0%] 11[ 0.0%]
4[ 0.0%] 12[ 0.0%]
5[ 0.0%] 13[ 0.0%]
6[ 0.0%] 14[ 0.0%]
7[ 0.0%] 15[ 0.0%]
PID USER PRI NI S CPU CPU%▽MEM% TIME+ Command
577 root RT 0 R 0 100.0 0.2 0:23.17 stress-ng-cpu [run]
555 arighi 20 0 R 1 100.0 0.0 0:28.67 yes
It's debatable whether per-CPU tasks should be re-enqueued as well, but
doing so is probably safer: the scheduler can recognize re-enqueued
tasks through the %SCX_ENQ_REENQ flag, reassess their placement, and
either put them back at the head of the local DSQ or let another task
attempt to take the CPU.
This also prevents giving per-CPU tasks an implicit priority boost,
which would otherwise make them more likely to reclaim CPUs preempted by
higher scheduling classes.
Fixes: 97e13ecb02668 ("sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()") Cc: stable@vger.kernel.org # v6.15+ Signed-off-by: Andrea Righi <arighi@nvidia.com> Acked-by: Changwoo Min <changwoo@igalia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Mark Brown [Tue, 16 Sep 2025 12:09:08 +0000 (13:09 +0100)]
Fix lpaif_type and DAI configuration for I2S
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
Fix the lpaif_type configuration for the I2S interface.
The proper lpaif interface type required to allow DSP to vote
appropriate clock setting for I2S interface and also Add support
for configuring the DAI format on MI2S interfaces to allow setting
the appropriate bit clock and frame clock polarity, ensuring correct
audio data transmissionover MI2S.
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
It turns out that the dual screen models use 0x5E for attaching and
detaching the keyboard instead of 0x5F. So, re-add the codes by
reverting commit cf3940ac737d ("platform/x86: asus-wmi: Remove extra
keys from ignore_key_wlan quirk"). For our future reference, add a
comment next to 0x5E indicating that it is used for that purpose.
Fixes: cf3940ac737d ("platform/x86: asus-wmi: Remove extra keys from ignore_key_wlan quirk") Reported-by: Rahul Chandra <rahul@chandra.net> Closes: https://lore.kernel.org/all/10020-68c90c80-d-4ac6c580@106290038/ Cc: stable@kernel.org Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://patch.msgid.link/20250916072818.196462-1-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
projects / users / jedix / linux-maple.git / log