When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning. Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.
Fix this by calculating the mindef with the new link considered
before calling the driver.
In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def() instead.
Like the other calls in this function virt_to_page() expects
a pointer, not an integer.
However since many architectures implement virt_to_pfn() as
a macro, this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.
To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.
When SMT thread CPUs are added to CPU masks the nr_cpu_ids
limit is not checked and could be exceeded. This leads to
a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set
and the command line parameter nr_cpus is set to 1.
Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key
material. Zeroize the copies of these keys in kernel memory after
creating the protected key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If there are failures in DSP runtime resume, the device state will not
reach active and this makes it impossible e.g. to retrieve a possible
DSP panic dump via "exception" debugfs node. If
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in
cache is stale. If debugfs cache is not used, the region simply cannot
be read.
To allow debugging these scenarios, update the debugfs cache contents in
resume error handler. User-space can then later retrieve DSP panic and
other state via debugfs (requires SOF debugfs cache to be enabled in
build).
Reported-by: Curtis Malainey <cujomalainey@chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey@chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
When a firmware IPC error happens during a pm_runtime suspend, we
ignore the error and suspend anyways. However, the code
unconditionally increases the runtime_pm counter. This results in a
confusing configuration where the code will suspend, resume but never
suspend again due to the use of pm_runtime_get_noresume().
The intent of the counter increase was to prevent entry in D3, but if
that transition to D3 is already started it cannot be stopped. In
addition, there's no point in that case in trying to prevent anything,
the firmware error is handled and the next resume will re-initialize
the firmware completely.
This patch changes the logic to prevent suspend when the device is
pm_runtime active and has a use_count > 0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
do not call blocking ops when !TASK_RUNNING; state=1 set at
prepare_to_wait_event+0x6d/0x690
For avoiding the potential deadlock, rewrite to an open-coded loop
instead. Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.
dvb_register_device() dynamically allocates fops with kmemdup()
to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops()
in the dvb_device_open() process, and kfree()d in dvb_free_device().
However, it is not common to use dynamically allocated fops instead
of 'static const' fops as an argument of replace_fops(),
and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(),
such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.
So, instead of kfree() the fops dynamically allocated in
dvb_register_device() in dvb_free_device() called during the
.disconnect() process, kfree() it collectively in exit_dvbdev()
called when the dvbdev.c module is removed.
Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.
The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.
So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]
Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(),
which is called when the device is disconnected, dvb_frontend_free()
is not finally called.
This causes a memory leak just by repeatedly plugging and
unplugging the device.
Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().
The function of "dvb_ca_en50221_write_data" at source/drivers/media
/dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of
"dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/
dvb_ca_en50221.c.
The second case is for writing the host link buf size on the
Command Register in the function of "dvb_ca_en50221_link_init"
at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following.
In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the
Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the
Command Register should be set. We can see this setting operation
in the function of the "dvb_ca_en50221_link_init" like below.
...
if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
return ret;
...
But, after that, the real writing operation is implemented using
the function of the "dvb_ca_en50221_write_data" in the function of
"dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data"
includes the function of "ca->pub->write_cam_control",
and the function of the "ca->pub->write_cam_control" in the
function of the "dvb_ca_en50221_wrte_data" does not include
"CMDREG_SW" flag like below.
...
if ((status = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC",
but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the
"dvb_ca_en50221_link_init" was rollbacked by the follwoing function
of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size
is not properly written in the CI module.
Through this patch, we fix this bug.
IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock
is initialized in netup_spi_init(). However, irq handler is registered
before initializing the lock.
Spinlock dma->lock and i2c->lock suffer from the same problem.
Fix this by registering the irq at the end of probe.
In su3000_read_mac_address, if i2c_transfer fails to execute two
messages, array mac address will not be initialized. Without handling
such error, later in function dvb_usb_adapter_dvb_init, proposed_mac
is accessed before initialization.
Fix this error by returning a negative value if message execution fails.
In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach digitv_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen. We add
check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null
and msg[i].len is zero, former checks on msg[i].buf would be passed.
If accessing msg[i].buf[0] without sanity check, null pointer deref
would happen. We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null,
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in
az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99.
However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0.
We add check on msg[i].len to prevent null-ptr-deref.
In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.
alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.
Pin configs are needed to enable headset mic detection.
Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff
A bunch of TI's codecs have binding schemas which force #sound-dai-cells
to one despite those codecs only having a single DAI. Allow for bindings
with zero DAI cells and deprecate the former non-zero value.
This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.
Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.
Test: Tested against Android kernel unit tests & CTS Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since we no longer (want to) export any libc symbols the
_user portions of any drivers need to be built into image
rather than the module. I missed this for the watchdog.
Fix the watchdog accordingly.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.
On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI
IDs) accessing temp3_{min,max} fails with an invalid field error (note
that there is no problem setting the thresholds for temp1).
This contradicts the NVM Express Base Specification 2.0b, page 292:
The over temperature threshold and under temperature threshold
features shall be implemented for all implemented temperature sensors
(i.e., all Temperature Sensor fields that report a non-zero value).
Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds
for all but the composite temperature and set it for this device.
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
On corrupt gfs2 file systems the evict code can try to reference the
journal descriptor structure, jdesc, after it has been freed and set to
NULL. The sequence of events is:
init_journal()
...
fail_jindex:
gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL
if (gfs2_holder_initialized(&ji_gh))
gfs2_glock_dq_uninit(&ji_gh);
fail:
iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
evict()
gfs2_evict_inode()
evict_linked_inode()
ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
<------references the now freed/zeroed sd_jdesc pointer.
The call to gfs2_trans_begin is done because the truncate_inode_pages
call can cause gfs2 events that require a transaction, such as removing
journaled data (jdata) blocks from the journal.
This patch fixes the problem by adding a check for sdp->sd_jdesc to
function gfs2_evict_inode. In theory, this should only happen to corrupt
gfs2 file systems, when gfs2 detects the problem, reports it, then tries
to evict all the system inodes it has read in up to that point.
Reported-by: Yang Lan <lanyang0908@gmail.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit adds memory barrier for the 'vq' update in function
mlxbf_tmfifo_virtio_find_vqs() to avoid potential race due to
out-of-order memory write. It also adds barrier for the 'is_ready'
flag to make sure the initializations are visible before this flag
is checked.
This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown,
but apparently the same id is also used on Medfield.
Tested on the Medfield based Motorola RAZR i smartphone.
When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.
Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.
When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.
For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}
For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.
For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.
To fix this,add uleb128 decode to cover all the above case.
Signed-off-by: Haibo Li <haibo.li@mediatek.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the sibling keys check fails before we move keys from one sibling
leaf to another, we are not aborting the transaction - we leave that to
some higher level caller of btrfs_search_slot() (or anything else that
uses it to insert items into a b+tree).
This means that the transaction abort will provide a stack trace that
omits the b+tree modification call chain. So change this to immediately
abort the transaction and therefore get a more useful stack trace that
shows us the call chain in the bt+tree modification code.
It's also important to immediately abort the transaction just in case
some higher level caller is not doing it, as this indicates a very
serious corruption and we should stop the possibility of doing further
damage.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.
This issue is not theoretical. I managed to author a POC for it:
The Nextbook Ares 8A tablet which has Android as factory OS, has a buggy
DSDT with both ESSX8316 and 10EC5651 ACPI devices.
This tablet actually uses an rt5651 codec, but the matching code ends up
picking the ESSX8316 device, add a quirk to ignote the ESSX8316 device
on this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230429104721.7176-1-hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in
a NULL pointer dereference.
This happens because we're passing the wrong pointer to
watchdog_register_device(). Fix this by getting rid of the static
watchdog_device structure and use the one embedded into the driver's
per-instance private data.
[WHY]
Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context.
We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()".
[HOW]
Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()",
to ensure that registers be accessed through RLCG instead of KIQ.
Christoph reported the mptcp variant of a recently addressed plain
TCP issue. Similar to commit e14cadfd80d7 ("tcp: add annotations around
sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence
KCSAN reports around lockless sk_shutdown access.
Fixes: 71ba088ce0aa ("mptcp: cleanup accept and poll") Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first subflow socket is accessed outside the msk socket lock
by mptcp_subflow_fail(), we need to annotate each write access
with WRITE_ONCE, but a few spots still lacks it.
Fixes: 76a13b315709 ("mptcp: invoke MP_FAIL response when needed") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the msk socket is cloned at MPC handshake time, a few
fields are initialized in a racy way outside mptcp_sk_clone()
and the msk socket lock.
The above is due historical reasons: before commit a88d0092b24b
("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket
carrying all the needed date was not available yet at msk creation
time
We can now refactor the code moving the missing initialization bit
under the socket lock, removing the init race and avoiding some
code duplication.
This will also simplify the next patch, as all msk->first write
access are now under the msk socket lock.
Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MPTCP can access the first subflow socket in a few spots
outside the socket lock scope. That is actually safe, as MPTCP
will delete the socket itself only after the msk sock close().
Still the such accesses causes a few KCSAN splats, as reported
by Christoph. Silence the harmless warning adding a few annotation
around the relevant accesses.
Fixes: 71ba088ce0aa ("mptcp: cleanup accept and poll") Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/402 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper
multiple times under the same socket lock scope. Additionally, in such
places, the socket status ensures that there is no MP capable handshake
running.
Under the above condition we can replace the later __mptcp_nmpc_socket()
helper invocation with direct access to the msk->subflow pointer and
better document such access is not supposed to fail with WARN().
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5b825727d087 ("mptcp: add annotations around msk->subflow accesses") Signed-off-by: Sasha Levin <sashal@kernel.org>
validate_linkmsg() was introduced by commit 1840bb13c22f5b ("[RTNL]:
Validate hardware and broadcast address attribute for RTM_NEWLINK")
to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same
check should also be done for newly created links.
This patch adds validate_linkmsg() call in rtnl_create_link(), to
avoid the invalid address set when creating some devices like:
# ip link add dummy0 type dummy
# ip link add link dummy0 name mac0 address 01:02 type macsec
Fixes: 0e06877c6fdb ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
marvell_nfc_setup_interface() uses the frequency retrieved from the
clock associated with the nand interface to determine the timings that
will be used. By changing the NAND frequency select without reflecting
this in the clock configuration this means that the timings calculated
don't correctly meet the requirements of the NAND chip. This hasn't been
an issue up to now because of a different bug that was stopping the
timings being updated after they were initially set.
When new timing values are calculated in marvell_nfc_setup_interface()
ensure that they will be applied in marvell_nfc_select_target() by
clearing the selected_chip pointer.
A switch held in reset by default needs to wait longer until we can
reliably detect it.
An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.
The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.
Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by: Andreas Svensson <andreas.svensson@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In this patch, we mainly try to handle sending a compressed ack
correctly if it's deferred.
Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(),
if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED
and then defer to the release cb phrase. Later once user releases
the sock, tcp_delack_timer_handler() should send a ack as expected,
which, however, cannot happen due to lack of ICSK_ACK_TIMER flag.
Therefore, the receiver would not sent an ack until the sender's
retransmission timeout. It definitely increases unnecessary latency.
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If an IOMMU domain was never attached, it lacks any linkage to the
actual IOMMU hardware. Attempting to do flush_iotlb_all() on it will
result in a NULL pointer dereference. This seems to happen after the
recent IOMMU core rework in v6.4-rc1.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000018
Call trace:
mtk_iommu_flush_iotlb_all+0x20/0x80
iommu_create_device_direct_mappings.part.0+0x13c/0x230
iommu_setup_default_domain+0x29c/0x4d0
iommu_probe_device+0x12c/0x190
of_iommu_configure+0x140/0x208
of_dma_configure_id+0x19c/0x3c0
platform_dma_configure+0x38/0x88
really_probe+0x78/0x2c0
Check if the "bank" field has been filled in before actually attempting
the IOTLB flush to avoid it. The IOTLB is also flushed when the device
comes out of runtime suspend, so it should have a clean initial state.
Fixes: 08500c43d4f7 ("iommu/mediatek: Adjust the structure") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230526085402.394239-1-wenst@chromium.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
During driver load it reads embedded_cpu bit from initialization
segment, but the initialization segment is readable only after
initialization bit is cleared.
Move the call to mlx5_read_embedded_cpu() right after initialization bit
cleared.
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423c4 ("nfsd: check passed socket's net matches NFSd superblock's one") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: NeilBrown <neilb@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255
The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.
The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.
Fixes: b42be38b2778 ("netlink: add API to retrieve all group memberships") Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:
$ ip link add ifb0 type ifb
$ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
$ tc qdisc add dev ifb0 clsact
$ tc qdisc link dev ifb0 handle ffff: parent 1:1
$ tc qdisc show dev ifb0
qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
qdisc clsact ffff: parent ffff:fff1 refcnt 2
^^^^^^^^
clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.
ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT). Prohibit regrafting them.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 1f211a1b929c ("net, sched: add clsact qdisc") Tested-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):
$ ip link add name ifb0 type ifb
$ tc qdisc add dev ifb0 parent ffff:fff1 htb
$ tc qdisc add dev ifb0 clsact
Error: Exclusivity flag on, cannot modify.
$ drgn
...
>>> ifb0 = netdev_get_by_name(prog, "ifb0")
>>> qdisc = ifb0.ingress_queue.qdisc_sleeping
>>> print(qdisc.ops.id.string_().decode())
htb
>>> qdisc.flags.value_() # TCQ_F_INGRESS
2
Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL
for everything else. Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 1f211a1b929c ("net, sched: add clsact qdisc") Tested-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When an alernate RNIC is available in system, SMC will try to add a new
link based on the RNIC for resilience. All the RMBs in use will be mapped
to the new link. Then the RMBs' MRs corresponding to the new link will be
filled into SMCRv2 LLC ADD LINK messages.
However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which
haven't been mapped to the new link and have no valid MRs, thus causing
a crash. So this patch fixes the logic.
Fixes: b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch replaces the tp->mss_cache check in getting TCP_MAXSEG
with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since
tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if
it's zero is probably a bug.
With this change, getting TCP_MAXSEG before connecting will return
default MSS normally, and return user_mss if user_mss is set.
Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.
A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.
tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.
Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.
When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]
This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().
If this counter is not zero, tcp_disconnect() returns an error.
This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.
Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)
If the local invalidate fence is indicated in the WR, only the read fence
is currently being set in WQE. Fix this to set both the read and local
fence in the WQE.
There is a window where the poll cq may use a QP that has been freed.
This can happen if a CQE is polled before irdma_clean_cqes() can clear the
CQE's related to the QP and the destroy QP races to free the QP memory.
then the QP structures are used in irdma_poll_cq. Fix this by moving the
clearing of CQE's before the reference is removed and the QP is destroyed.
A few functions provide an empty interface definition when
CONFIG_MTD_NAND_INGENIC_ECC is disabled, but they are accidentally
defined as global functions in the header:
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:39:5: error: no previous prototype for 'ingenic_ecc_calculate'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:46:5: error: no previous prototype for 'ingenic_ecc_correct'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:53:6: error: no previous prototype for 'ingenic_ecc_release'
drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:57:21: error: no previous prototype for 'of_ingenic_ecc_get'
Turn them into 'static inline' definitions instead.
Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230516202133.559488-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.
Fix this by propagating the mode switch status information to
xgbe_phy_status().
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Most protos' poll() methods insert a memory barrier between
writes to sk_err and sk_error_report(). This dates back to
commit a4d258036ed9 ("tcp: Fix race in tcp_poll").
I guess we should do the same thing in TLS, tcp_poll() does
not hold the socket lock.
Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The value is changed under lock_sock() and po->bind_lock, so we
need READ_ONCE() to access pkt_sk(sk)->num without these locks in
packet_bind_spkt(), packet_bind(), and sk_diag_fill().
Note that WRITE_ONCE() is already added by commit c7d2ef5dd4b0
("net/packet: annotate accesses to po->bind").
BUG: KCSAN: data-race in packet_bind / packet_do_bind
write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0:
packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236
packet_bind+0x99/0xe0 net/packet/af_packet.c:3321
__sys_bind+0x19b/0x1e0 net/socket.c:1803
__do_sys_bind net/socket.c:1814 [inline]
__se_sys_bind net/socket.c:1812 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1812
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1:
packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322
__sys_bind+0x19b/0x1e0 net/socket.c:1803
__do_sys_bind net/socket.c:1814 [inline]
__se_sys_bind net/socket.c:1812 [inline]
__x64_sys_bind+0x40/0x50 net/socket.c:1812
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x0300 -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 96ec6327144e ("packet: Diag core and basic socket info dumping") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230524232934.50950-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Online Amateur Radio Community (OARC) has recently been experimenting
with building a nationwide packet network in the UK.
As part of our experimentation, we have been testing out packet on 300bps HF,
and playing with net/rom. For HF packet at this baud rate you really need
to make sure that your MTU is relatively low; AX.25 suggests a PACLEN of 60,
and a net/rom PACLEN of 40 to go with that.
However the Linux net/rom support didn't work with a low PACLEN;
the mkiss module would truncate packets if you set the PACLEN below about 200 or so, e.g.:
This didn't make any sense to me (if the packets are smaller why would they
be truncated?) so I started investigating.
I looked at the packets using ethereal, and found that many were just huge
compared to what I would expect.
A simple net/rom connection request packet had the request and then a bunch
of what appeared to be random data following it:
</quote>
Simon provided a patch that I slightly revised:
Not only we must not use skb_tailroom(), we also do
not want to count NR_NETWORK_LEN twice.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Co-Developed-by: Simon Kapadia <szymon@kapadia.pl> Signed-off-by: Simon Kapadia <szymon@kapadia.pl> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Simon Kapadia <szymon@kapadia.pl> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230524141456.1045467-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.
To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.
mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.
projects / users / dwmw2 / linux.git / log