Yunxiang Li [Fri, 26 Apr 2024 03:15:28 +0000 (23:15 -0400)]
drm/amdgpu: Move ras resume into SRIOV function
This is part of the reset, move it into the reset function.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdxcp is a platform driver for creating partition devices. libdrm
library identifies a platform device based on 'OF_FULLNAME' or
'MODALIAS'. If two or more devices have the same platform name, drm
library only picks the first device. Platform driver core uses name of
the device to populate 'MODALIAS'. When 'amdgpu_xcp' is used as the base
name, only first partition device gets identified. Assign unique name so
that drm library identifies partition devices separately.
amdxcp doesn't support probe of partitions, it doesn't bother about
modaliases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peyton Lee [Tue, 30 Apr 2024 14:09:09 +0000 (22:09 +0800)]
drm/amdgpu/vpe: fix vpe dpm clk ratio setup failed
Some version of BIOS does not enable all clock levels,
resulting in high level clock frequency of 0.
The number of valid CLKs must be confirmed in advance.
Signed-off-by: Peyton Lee <peytolee@amd.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove redundant NULL check in dcn10_set_input_transfer_func
This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch") Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove redundant NULL check in dce110_set_input_transfer_func
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch") Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The retry loop for SRIOV reset have refcount and memory leak issue.
Depending on which function call fails it can potentially call
amdgpu_amdkfd_pre/post_reset different number of times and causes
kfd_locked count to be wrong. This will block all future attempts at
opening /dev/kfd. The retry loop also leakes resources by calling
amdgpu_virt_init_data_exchange multiple times without calling the
corresponding fini function.
Align with the bare-metal reset path which doesn't have these issues.
This means taking the amdgpu_amdkfd_pre/post_reset functions out of the
reset loop and calling amdgpu_device_pre_asic_reset each retry which
properly free the resources from previous try by calling
amdgpu_virt_fini_data_exchange.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yunxiang Li [Mon, 22 Apr 2024 18:44:38 +0000 (14:44 -0400)]
drm/amdgpu: Add reset_context flag for host FLR
There are other reset sources that pass NULL as the job pointer, such as
amdgpu_amdkfd_reset_work. Therefore, using the job pointer to check if
the FLR comes from the host does not work.
Add a flag in reset_context to explicitly mark host triggered reset, and
set this flag when we receive host reset notification.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yunxiang Li [Mon, 22 Apr 2024 18:59:02 +0000 (14:59 -0400)]
drm/amdgpu: Fix two reset triggered in a row
Some times a hang GPU causes multiple reset sources to schedule resets.
The second source will be able to trigger an unnecessary reset if they
schedule after we call amdgpu_device_stop_pending_resets.
Move amdgpu_device_stop_pending_resets to after the reset is done. Since
at this point the GPU is supposedly in a good state, any reset scheduled
after this point would be a legitimate reset.
Remove unnecessary and incorrect checks for amdgpu_in_reset that was
kinda serving this purpose.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These lines are indented too far. Clean the whitespace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Wed, 24 Apr 2024 16:28:09 +0000 (17:28 +0100)]
drm/amd/display: Fix spelling various spelling mistakes
There are various spelling mistakes in dml2_printf messages, fix them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Avoid -Wenum-float-conversion in add_margin_and_round_to_dfs_grainularity()
When building with clang 19 or newer (which strengthened some of the
enum conversion warnings for C), there is a warning (or error with
CONFIG_WERROR=y) around doing arithmetic with an enumerated type and a
floating point expression.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:181:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
181 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This conversion is expected due to the nature of the enumerated value
and definition, so silence the warning by casting the enumeration to an
integer explicitly to make it clear to the compiler.
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 30 Apr 2024 14:53:23 +0000 (09:53 -0500)]
drm/amd/display: Disable panel replay by default for now
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Mon, 29 Apr 2024 03:17:54 +0000 (11:17 +0800)]
drm/amd/pm: fix uninitialized variable warning for smu_v13
Clear warning that using uninitialized variable when the dpm is
not enabled and reuse the code for SMU13 to get the boot frequency.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Add sdma v7_0 ip block support. (Likun)
v2: Move vmhub from ring_funcs to ring. (Hawking)
v3: Switch to AMDGPU_GFXHUB(0). (Hawking)
v4: Move microcode init into early_init. (Likun)
v5: Fix warnings (Alex)
v6: Squash in various fixes (Alex)
v7: Rebase (Alex)
v8: Rebase (Alex)
Judging from the product name this might be a clone of a
BOE panel, but with larger dimensions.
Panel frequently shows non-functional backlight control. Adding
some debug prints to update_connector_ext_caps() shows that
something the OLED bit of ext_caps is set, and then the driver
assumes that backlight is controlled via AUX.
Forcing backlight control to PWM via amdgpu.backlight=0 restores
backlight operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 8 Apr 2024 13:26:56 +0000 (09:26 -0400)]
drm/amdkfd: Bump kfd version for contiguous VRAM allocation
Bump the kfd ioctl minor version to delcare the contiguous VRAM
allocation flag support.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Add gmc v12_0 ip block support.
v2: Switch to gfx.kiq array.
v3: Switch to vmhubs_mask.
v4: Switch to AMDGPU_MMHUB0(0) and AMDGPU_GFXHUB(0)
v5: Rebase (Alex)
v6: Squash in fixes for AGP handling, gfxhub init order,
vmhub index (Alex)
v7: Rebase (Alex)
v8: squash in ecc fix (Alex)
Lancelot SIX [Wed, 10 Apr 2024 13:14:13 +0000 (14:14 +0100)]
drm/amdkfd: Flush the process wq before creating a kfd_process
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 5 Apr 2024 20:02:50 +0000 (16:02 -0400)]
drm/amdkfd: Evict BO itself for contiguous allocation
If the BO pages pinned for RDMA is not contiguous on VRAM, evict it to
system memory first to free the VRAM space, then allocate contiguous
VRAM space, and then move it from system memory back to VRAM.
v6: user context should use interruptible call (Felix)
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains because some lines are indented more than they should
be. I went a bit crazy re-indenting this. ;)
The comments were not useful except as a marker of things which are left
to implement so I deleted most of them except for the TODO.
I introduced a "data" pointer so that I could replace
"scl_data->dscl_prog_data." with just "data->" and shorten the lines a
bit. It's more readable without the line breaks.
I also tried to align it so you can see what is changing on each line.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 26 Apr 2024 04:52:45 +0000 (12:52 +0800)]
drm/amd/pm: fix uninitialized variable warning for smu8_hwmgr
Clear warnings that using uninitialized value level when fails
to get the value from SMU.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the return of function smum_send_msg_to_smc
as it may fail to initialize the variable.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Thu, 25 Apr 2024 05:15:27 +0000 (13:15 +0800)]
drm/amdgpu: fix overflowed array index read warning
Clear overflowed array index read warning by cast operation.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Thu, 25 Apr 2024 03:09:00 +0000 (11:09 +0800)]
drm/amdgpu: fix potential resource leak warning
Clear resource leak warning that when the prepare fails,
the allocated amdgpu job object will never be released.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Tue, 23 Apr 2024 02:14:47 +0000 (10:14 +0800)]
drm/amdgpu: avoid dump mca bank log muti times during ras ISR
because the ue valid mca count will only be cleared after gpu reset,
so only dump mca log on the first time to get mca bank after receive RAS interrupt.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Thu, 18 Apr 2024 07:46:00 +0000 (15:46 +0800)]
drm/amdgpu: add MCA smu cache support
v1:
because SMU CE valid mca bank will be cleared after reading,
this patch adds mca cache at the driver level to ensure that the mca bank is not lost.
v2:
refine amdgpu_mca_init/fini/reset() function name.
v3:
add mca_cache.lock support
only add CE bank to mca bank cache.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add mmhub v4_1_0 ip block support (v4)
Add initial support for MMHUB 4.1.0.
v1: Add mmhub v4_1_0 ip block support.
v2: Switch to AMDGPU_MMHUB0(0).
v3: squash in fix for ip version check (Alex)
v4: squash in vm_contexts_disable fix (Alex)
Philip Yang [Fri, 5 Apr 2024 19:56:41 +0000 (15:56 -0400)]
drm/amdgpu: Evict BOs from same process for contiguous allocation
When TTM failed to alloc VRAM, TTM try evict BOs from VRAM to system
memory then retry the allocation, this skips the KFD BOs from the same
process because KFD require all BOs are resident for user queues.
If TTM with TTM_PL_FLAG_CONTIGUOUS flag to alloc contiguous VRAM, allow
TTM evict KFD BOs from the same process, this will evict the user queues
first, and restore the queues later after contiguous VRAM allocation.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 19 Apr 2024 20:27:00 +0000 (16:27 -0400)]
drm/amdgpu: Handle sg size limit for contiguous allocation
Define macro AMDGPU_MAX_SG_SEGMENT_SIZE 2GB, because struct scatterlist
length is unsigned int, and some users of it cast to a signed int, so
every segment of sg table is limited to size 2GB maximum.
For contiguous VRAM allocation, don't limit the max buddy block size in
order to get contiguous VRAM memory. To workaround the sg table segment
size limit, allocate multiple segments if contiguous size is bigger than
AMDGPU_MAX_SG_SEGMENT_SIZE.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Disable seamless boot on 128b/132b encoding
- Have cursor and surface updates together
- Change ASSR disable sequence to avoid corruption
- Fix few IPS problems
- Enable Replay for DCN315
- Fix few ODM problems
- Fix FEC_READY write timing
- Fix few FPO problems
- Adjust DML21 gpuvm_enable assignment
- Fix divide by 0 error in VM environment
- Fix few DCN35 problems
- Fix flickering on DCN321
- Fix mst resume problem
- Fix multi-disp FAMS problem
- Refactor Replay
- Update some of the dcn303 parameters
- Enable legacy fast update for dcn301
- Add VCO parameter for DCN31 FPU
- Fix problems reported by Coverity
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Disable seamless boot on 128b/132b encoding
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently disabling ASSR before stream is disabled causes visible
display corruption.
[How]
Move disable ASSR command to after stream has been disabled.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 3 Apr 2024 16:13:56 +0000 (12:13 -0400)]
drm/amd/display: Add periodic detection for IPS
[Why]
HPD interrupt cannot be handled in IPS2 state.
So if there's a display topology change while system in IPS2
it can be missed.
[How]
Implement worker to check each 5 sec in IPS for HPD.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 18 Apr 2024 13:51:36 +0000 (09:51 -0400)]
drm/amd/display: Notify idle link detection through shared state
[Why]
We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state.
[How]
Replace the HW access with a check on the shared state bit. This will
work the same way as the SCRATCH0 but won't require a wake in the case
where link detection isn't required.
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joan Lee [Mon, 15 Apr 2024 09:47:42 +0000 (17:47 +0800)]
drm/amd/display: Enable Replay for DCN315
[why & how]
Enable Replay for DCN315.
Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Joan Lee <joan.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Wed, 17 Apr 2024 19:23:08 +0000 (15:23 -0400)]
drm/amd/display: use even ODM slice width for two pixels per container
[why]
When optc uses two pixel per container, each ODM slice width must be an
even number.
[how]
If ODM slice width is odd number increase it by 1.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
We can miss writing FEC_READY in some cases before LT start, which
violates DP spec. Remove the condition guarding the DPCD write so that
the write happens unconditionally.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 18 Apr 2024 15:53:34 +0000 (11:53 -0400)]
drm/amd/display: For FPO + Vactive check that all pipes support VA
[Description]
For FPO + Vactive scenarios we must check that all non-FPO pipes
have VACTIVE margin to allow it. The previous check only confirmed
that there is at least one pipe that has vactive margin, but this
is incorrect as the vactive display could be using two pipes (MPO)
where the desktop plane has vactive margin, and the video plane
does not.
Reviewed-by: Samson Tam <samson.tam@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently in DML2.1 gpuvm_enable was hardcoded.
Use passed info from DC for DML21 to be in sync with
what is used in DC.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 16 Apr 2024 18:42:18 +0000 (14:42 -0400)]
drm/amd/display: Assign linear_pitch_alignment even for VM
[Description]
Assign linear_pitch_alignment so we don't cause a divide by 0
error in VM environments
Reviewed-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Refactor HUBBUB into component folder
[why]
cleaning up the code refactor requires hubbub to be in its own component.
[how]
Move all files under newly created hubbub folder and fix the makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 17 Apr 2024 22:44:16 +0000 (18:44 -0400)]
drm/amd/display: Only program P-State force if pipe config changed
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Webb Chen [Tue, 27 Feb 2024 02:01:25 +0000 (10:01 +0800)]
drm/amd/display: Revert "dc: Keep VBios pixel rate div setting util next mode set"
This reverts commit 4d4d3ff16db2 ("drm/amd/display: Keep VBios pixel rate div
setting util next mode set") which causes issue.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Webb Chen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Miess [Wed, 24 Apr 2024 08:49:13 +0000 (16:49 +0800)]
drm/amd/display: Enable RCO for PHYSYMCLK in DCN35
[Why & How]
Enable root clock optimization for PHYSYMCLK and only
disable it when it's actively being used
v2: Fix array-index-out-of-bounds in dcn35_calc_blocks_to_gate
Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 16 Apr 2024 15:24:05 +0000 (11:24 -0400)]
drm/amd/display: Add trigger FIFO resync path for DCN35
[Why]
FIFO error can occur if we don't trigger a DISPCLK change after
touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display
we see FIFO underflow.
[How]
We have the path to trigger the resync as the workaround in
DCN314/DCN32, it just needs to be ported over to DCN35.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 12 Apr 2024 18:34:30 +0000 (14:34 -0400)]
drm/amd/display: Re-enable IPS2 for static screen
[Why]
IPS stability was fixed in bios.
[How]
Set disable_ips init flag to DMUB_IPS_ENABLE.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 12 Apr 2024 19:58:05 +0000 (15:58 -0400)]
drm/amd/display: take ODM slice count into account when deciding DSC slice
[why]
DSC slice must be divisible by ODM slice count.
[how]
If DSC slice count is not a multiple of ODM slice count, increase DSC
slice until it is. Otherwise fail to compute DSC configuration.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Ma [Thu, 11 Apr 2024 21:17:04 +0000 (17:17 -0400)]
drm/amd/display: Fix DC mode screen flickering on DCN321
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Mon, 15 Apr 2024 06:04:00 +0000 (14:04 +0800)]
drm/amd/display: Defer handling mst up request in resume
[Why]
Like commit ec5fa9fcdeca ("drm/amd/display: Adjust the MST resume flow"), we
want to avoid handling mst topology changes before restoring the old state.
If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have
changce to handle CSN event first and fire hotplug event before restoring the
cached state.
[How]
Disable mst branch sending up request event before we restoring the cached state.
DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume().
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Restrict multi-disp support for in-game FAMS
[HOW&WHY]
In multi-monitor cases the VBLANK stretch that is required to align both
monitors may be so large that it may create issues for gaming performance.
Use debug value to restrict in-game FAMS support for multi-disp use case.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Chan [Tue, 9 Apr 2024 06:25:39 +0000 (14:25 +0800)]
drm/amd/display: Refactor for Replay Link off frame count
[why]
To refine for link off frame count in diagnose tool,
the driver show the link off frame count number instead of showing link
off frame count level.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Handle the case which quad_part is equal 0
Add code to handle case when quad_part is 0 in gpu_addr_to_uma().
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add log_color_state callback to multiple DCNs
Set up to enable log color state for multiple DCNs.
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / dwmw2 / linux.git / log