Marek Szyprowski [Fri, 4 Sep 2020 13:17:07 +0000 (15:17 +0200)]
staging: tegra-vde: fix common struct sg_table related issues
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
In a number of places in emxx_udc.c, there are variables which are
assigned to without that value ever being used. Remove these pointless
assignments.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200902154628.283453-1-alex.dewar90@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Dewar [Tue, 25 Aug 2020 09:19:28 +0000 (10:19 +0100)]
staging: emxx_udc: Fix passing of NULL to dma_alloc_coherent()
In nbu2ss_eq_queue() memory is allocated with dma_alloc_coherent(),
though, strangely, NULL is passed as the struct device* argument. Pass
the UDC's device instead. Fix up the corresponding call to
dma_free_coherent() in the same way.
Build-tested on x86 only.
Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200825091928.55794-1-alex.dewar90@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Thu, 27 Aug 2020 08:14:45 +0000 (10:14 +0200)]
staging: media: atomisp: Convert to GPIO descriptors
Convert the atomisp LM3554 driver to use GPIO descriptors
fully. It was already retrieveing the GPIO lines as descriptors
but for some reason converting them back into global GPIO
numbers. There is no reason to do this, just deal with the
descriptors as-is.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:28 +0000 (10:58 +0200)]
staging: wfx: add workaround for 'timeout while wake up chip'
The host and the device can be connected with a called Wake-Up GPIO.
When the host fall down this GPIO, it allows the device to enter in deep
sleep and no communication with the device is no more possible (the
device wakes up automatically on DTIM and fetch data if necessary).
So, before to communicate with the device, the driver have to raise the
Wake-up GPIO and then wait for an IRQ from the device.
Unfortunately, old firmwares have a race in sleep/wake-up process and
the device may never wake up. In this case, the IRQ is not sent and
driver complains with "timeout while wake up chip". Then, the driver
tries anyway to access the bus and an other error is raised by the bus.
Fortunately, when the bug occurs, it is possible to fall down the IRQ
and the device will eventually finish the sleep process. Then the driver
can wake it up normally.
The patch implements that workaround and add a retry limit in case
something goes very wrong.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:27 +0000 (10:58 +0200)]
staging: wfx: remove useless extra jiffy
The initial developer has feared msecs_to_jiffies() could round down the
result. However, the documentation of msecs_to_jiffies() says that the
result is rounded upward. So the increment of the result of
msecs_to_jiffies() is not necessary.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:26 +0000 (10:58 +0200)]
staging: wfx: enable powersave on probe
In the old days, ieee80211 powersave has some impact on the Rx speed.
These problems are solved for a long time now. There is no more reason
to not enabling it.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:24 +0000 (10:58 +0200)]
staging: wfx: fix potential use before init
The trace below can appear:
[83613.832200] INFO: trying to register non-static key.
[83613.837248] the code is fine but needs lockdep annotation.
[83613.842808] turning off the locking correctness validator.
[83613.848375] CPU: 3 PID: 141 Comm: kworker/3:2H Tainted: G O 5.6.13-silabs15 #2
[83613.857019] Hardware name: BCM2835
[83613.860605] Workqueue: events_highpri bh_work [wfx]
[83613.865552] Backtrace:
[83613.868041] [<c010f2cc>] (dump_backtrace) from [<c010f7b8>] (show_stack+0x20/0x24)
[83613.881463] [<c010f798>] (show_stack) from [<c0d82138>] (dump_stack+0xe8/0x114)
[83613.888882] [<c0d82050>] (dump_stack) from [<c01a02ec>] (register_lock_class+0x748/0x768)
[83613.905035] [<c019fba4>] (register_lock_class) from [<c019da04>] (__lock_acquire+0x88/0x13dc)
[83613.924192] [<c019d97c>] (__lock_acquire) from [<c019f6a4>] (lock_acquire+0xe8/0x274)
[83613.942644] [<c019f5bc>] (lock_acquire) from [<c0daa5dc>] (_raw_spin_lock_irqsave+0x58/0x6c)
[83613.961714] [<c0daa584>] (_raw_spin_lock_irqsave) from [<c0ab3248>] (skb_dequeue+0x24/0x78)
[83613.974967] [<c0ab3224>] (skb_dequeue) from [<bf330db0>] (wfx_tx_queues_get+0x96c/0x1294 [wfx])
[83613.989728] [<bf330444>] (wfx_tx_queues_get [wfx]) from [<bf320454>] (bh_work+0x454/0x26d8 [wfx])
[83614.009337] [<bf320000>] (bh_work [wfx]) from [<c014c920>] (process_one_work+0x23c/0x7ec)
[83614.028141] [<c014c6e4>] (process_one_work) from [<c014cf1c>] (worker_thread+0x4c/0x55c)
[83614.046861] [<c014ced0>] (worker_thread) from [<c0154c04>] (kthread+0x138/0x168)
[83614.064876] [<c0154acc>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
[83614.072200] Exception stack(0xecad3fb0 to 0xecad3ff8)
[83614.077323] 3fa0: 00000000000000000000000000000000
[83614.085620] 3fc0: 0000000000000000000000000000000000000000000000000000000000000000
[83614.093914] 3fe0: 000000000000000000000000000000000000001300000000
Indeed, the code of wfx_add_interface() shows that the interface is
enabled to early. So, the spinlock associated with some skb_queue may
not yet initialized when wfx_tx_queues_get() is called.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:22 +0000 (10:58 +0200)]
staging: wfx: drop useless field from struct wfx_tx_priv
The device need to receive a skb with necessary space for the ICV. So,
the driver adds this space before to send the frame.
Currently, once the frame is sent, the driver restore the original
content of the skb. However, this step is useless. Mac80211 don't do it
when software encryption is enabled.
Once we have removed this step, it appears that it is no more necessary
to keep hw_key in tx_priv. Then, it is possible to simplify a bunch of
code in the Tx path.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:21 +0000 (10:58 +0200)]
staging: wfx: fix support for cipher AES_CMAC (multicast PMF)
When MFP is enabled, the multicast management frames are not protected,
in fact. Instead, but they should include an IE containing the MMIC of
the frames (i.e. a cryptographic signature).
Until now, the driver didn't correctly detect this kind of frames (they
are not marked protected but they are associated to a key) and didn't
ask to the device to encrypt them.
In add, the device is not able to generate the IE itself. Mac80211 has
to generate the IE and let the device compute the MMIC.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:19 +0000 (10:58 +0200)]
staging: wfx: fix BA when MFP is disabled but BSS is MFP capable
The protection of the management frames is mainly done by mac80211.
However, frames for the management of the BlockAck sessions are directly
sent by the device. These frames have to be protected if MFP is in use.
So the driver has to pass the MFP configuration to the device.
Until now, the driver directly read the RSN IE of the BSS. However, it
didn't work when the BSS was MFP capable (ieee80211w=1) and the local
device has disabled MFP (ieee80211w=0).
This patch read the MFP information directly from the struct
ieee80211_sta. This information take into account the MFP negotiated
during the association. In addition, the code is far simpler.
Jérôme Pouiller [Tue, 25 Aug 2020 08:58:17 +0000 (10:58 +0200)]
staging: wfx: fix BA when device is AP and MFP is enabled
The protection of the management frames is mainly done by mac80211.
However, frames for the management of the BlockAck sessions are directly
sent by the device. These frames have to be protected if MFP is in use.
So the driver has to pass the MFP configuration to the device.
Until now, the BlockAck management frames were completely unprotected
whatever the status of the MFP negotiation. So, some devices dropped
these frames.
The device has two knobs to control the MFP. One global and one per
station. Normally, the driver should always enable global MFP. Then it
should enable MFP on every station with which MFP was successfully
negotiated. Unfortunately, the older firmwares only provide the
global control.
So, this patch enable global MFP as it is exposed in the beacon. Then it
marks every station with which the MFP is effective.
Thus, the support for the old firmwares is not so bad. It may only
encounter some difficulties to negotiate BA sessions when the local
device (the AP) is MFP capable (ieee80211w=1) but the station is not.
The only solution for this case is to upgrade the firmware.
As HISI_IRQ_KEY_DOWN and HISI_IRQ_KEY_UP are fixed values
and don't depend on irqnum/irqarray.
The IRQ addr and mask addr seem to be also fixed, based on some
comments at the OF parsing code. So, get rid of them too,
removing the of parsing function completely.
staging: regulator: hi6421v600-regulator: add a driver-specific debug macro
Using dev_dbg() is not too nice, as, instead of printing the
name of the regulator, it prints "regulator.<number>", making
harder to associate what is happening with each ldo line.
So, add a debug-specific macro, which will print the rdev's
name, just like the regulator core.
staging: mfd: hi6421-spmi-pmic: get rid of unused code
There are some checks there which could make sense for
downstream builds, but doesn't make much sense for
upstream ones. They came from the official Hikey970 tree
from Linaro, but even there, the commented-out code is not
set via other Kconfig vars.
So, let's just get rid of that. If needed later, this
patch can be (partially?) reversed.
Colin Ian King [Thu, 6 Aug 2020 10:47:01 +0000 (11:47 +0100)]
staging: wfx: fix a handful of spelling mistakes
There are various spelling mistakes in comments and error messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200806104701.46123-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Thu, 13 Aug 2020 17:34:58 +0000 (19:34 +0200)]
staging: rtl8192u: Do not use GFP_KERNEL in atomic context
'rtl8192_irq_rx_tasklet()' is a tasklet initialized in
'rtl8192_init_priv_task()'.
>From this function it is possible to allocate some memory with the
GFP_KERNEL flag, which is not allowed in the atomic context of a tasklet.
Use GFP_ATOMIC instead.
The call chain is:
rtl8192_irq_rx_tasklet (in r8192U_core.c)
--> rtl8192_rx_nomal (in r8192U_core.c)
--> ieee80211_rx (in ieee80211/ieee80211_rx.c)
--> RxReorderIndicatePacket (in ieee80211/ieee80211_rx.c)
Linus Torvalds [Sun, 16 Aug 2020 17:55:12 +0000 (10:55 -0700)]
Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Mike Rapoport [Sun, 16 Aug 2020 14:24:03 +0000 (17:24 +0300)]
parisc: fix PMD pages allocation by restoring pmd_alloc_one()
Commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.
Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.
Fixes: 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 16 Aug 2020 03:36:42 +0000 (20:36 -0700)]
Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes on the block side of things:
- Discard granularity fix (Coly)
- rnbd cleanups (Guoqing)
- md error handling fix (Dan)
- md sysfs fix (Junxiao)
- Fix flush request accounting, which caused an IO slowdown for some
configurations (Ming)
- Properly propagate loop flag for partition scanning (Lennart)"
* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
block: fix double account of flush request's driver tag
loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
rnbd: no need to set bi_end_io in rnbd_bio_map_kern
rnbd: remove rnbd_dev_submit_io
md-cluster: Fix potential error pointer dereference in resize_bitmaps()
block: check queue's limits.discard_granularity in __blkdev_issue_discard()
md: get sysfs entry after redundancy attr group create
Linus Torvalds [Sun, 16 Aug 2020 01:54:42 +0000 (18:54 -0700)]
Merge tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"I collected a single fix during the merge window: we managed to break
the early trap setup on !MMU, this fixes it"
* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Setup exception vector for nommu platform
Linus Torvalds [Sun, 16 Aug 2020 01:50:32 +0000 (18:50 -0700)]
Merge tag 'sh-for-5.9' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
Jens Axboe [Sat, 15 Aug 2020 22:58:42 +0000 (15:58 -0700)]
io_uring: short circuit -EAGAIN for blocking read attempt
One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.
Jens Axboe [Sat, 15 Aug 2020 18:44:50 +0000 (11:44 -0700)]
io_uring: sanitize double poll handling
There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.
Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().
Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.
projects / users / jedix / linux-maple.git / log