Michal Wajdeczko [Tue, 7 May 2024 16:57:57 +0000 (18:57 +0200)]
drm/xe/pf: Don't advertise support to enable VFs if not ready
Even if we have not enabled SR-IOV support using the platform
specific has_sriov flag, the hardware may still report SR-IOV
capability and the PCI layer may wrongly advertise driver support
to enable VFs. Explicitly reset the number of supported VFs to
zero to avoid confusion.
Applications may read the /sys/bus/pci/devices/.../sriov_totalvfs
prior to enabling VFs using the sriov_numvfs to check if such an
operation is possible.
Jonathan Cavitt [Fri, 10 May 2024 19:45:40 +0000 (12:45 -0700)]
drm/xe/xe_guc_submit: Declare reset if banned or killed or wedged
Add an additional condition to the reset_status guc_exec_queue_op that
returns true if the exec queue has been banned or killed or wedged. The
reset_status op is only used for exiting any xe_wait_user_fence_ioctl
that waits on an exec queue without timing out, so doing this will exit
the ioctl early in cases where the exec queue can no longer function,
such as after a GuC stop during a reset.
Jonathan Cavitt [Fri, 10 May 2024 19:45:39 +0000 (12:45 -0700)]
drm/xe/xe_guc_submit: Allow lr exec queues to be banned
LR queues currently don't get banned during a GT/GuC reset because they
lack a job. Though they don't have a job to detect the reset status of,
it's still possible to tell when they should be banned by looking at the
LRC: if the LRC head and tail don't match, then the exec queue should be
banned and cleaned up.
This also requires swapping the usage of xe_sched_tdr_queue_imm with
xe_guc_exec_queue_trigger_cleanup, as the former is specific to non-lr
exec queues.
Reorder the xe_sched_tdr_queue_imm and set_exec_queue_banned calls in
guc_exec_queue_stop. This prevents a possible race condition between
the two events in which it's possible for xe_sched_tdr_queue_imm to
wake the ufence waiter before the exec queue is banned, causing the
ufence waiter to miss the banned state.
Michal Wajdeczko [Fri, 10 May 2024 20:38:09 +0000 (22:38 +0200)]
drm/xe/uc: Reorder post hwconfig uC initialization step
We want to move the GuC submission initialization to the post
hwconfig step, but now this step is done too late as migration
initialization uses exec_queue that would crash due to a unset
exec_queue_ops. We can easily fix that by small function reorder.
Matthew Brost [Mon, 15 Apr 2024 19:04:53 +0000 (12:04 -0700)]
drm/xe: Only use reserved BCS instances for usm migrate exec queue
The GuC context scheduling queue is 2 entires deep, thus it is possible
for a migration job to be stuck behind a fault if migration exec queue
shares engines with user jobs. This can deadlock as the migrate exec
queue is required to service page faults. Avoid deadlock by only using
reserved BCS instances for usm migrate exec queue.
Fixes: a043fbab7af5 ("drm/xe/pvc: Use fast copy engines as migrate engine on PVC") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240415190453.696553-2-matthew.brost@intel.com Reviewed-by: Brian Welty <brian.welty@intel.com>
drm/xe: Change pcode timeout to 50msec while polling again
Polling is initially attempted with timeout_base_ms enabled for
preemption, and if it exceeds this timeframe, another attempt is made
without preemption, allowing an additional 50 ms before timing out.
v2
- Rebase
v3
- Move warnings to separate patch (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Fixes: 7dc9b92dcfef ("drm/xe: Remove i915_utils dependency from xe_pcode.") Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240508152216.3263109-2-himal.prasad.ghimiray@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_force_wake_init_gt() is a software-only initialization and doesn't
need to be called from xe_device_probe(). Move it to initialize
together with the gt.
Lucas De Marchi [Mon, 13 May 2024 21:37:49 +0000 (14:37 -0700)]
drm/xe: Move xe_gt_init_early() where it belongs
Early shall be early enough, stop doing other things with gt before it.
Now that xe_gt_init_early() doesn't need forcewake and doesn't depend on
the fake engine_mask initialization, move it where it belongs: it
doesn't need to be after hwconfig config anymore.
Lucas De Marchi [Mon, 13 May 2024 21:37:48 +0000 (14:37 -0700)]
drm/xe: Drop useless forcewake get/put
Forcewake used to be needed in xe_gt_init_early() since it was calling
xe_gt_topology_init(). That call was dropped in commit 4c47049d93b7
("drm/xe/guc: Fix missing topology init"), but the forcewake calls were
left behind. Remove them.
Michal Wajdeczko [Wed, 8 May 2024 17:10:00 +0000 (19:10 +0200)]
drm/xe: Rename few xe_args.h macros
To minimize the risk of future name collisions, rename macros to
always include the ARG or ARGS tag:
DROP_FIRST to DROP_FIRST_ARG
PICK_FIRST to FIRST_ARG
PICK_LAST to LAST_ARG
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> #v2 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240508171000.1864-1-michal.wajdeczko@intel.com
Shuicheng Lin [Tue, 7 May 2024 13:04:11 +0000 (13:04 +0000)]
drm/xe: Fix UBSAN shift-out-of-bounds failure
Here is the failure stack:
[ 12.988209] ------------[ cut here ]------------
[ 12.988216] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 12.988232] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 12.988235] CPU: 4 PID: 1310 Comm: gnome-shell Tainted: G U 6.9.0-rc6+prerelease1158+ #19
[ 12.988237] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.3301.A02.2208050712 08/05/2022
[ 12.988239] Call Trace:
[ 12.988240] <TASK>
[ 12.988242] dump_stack_lvl+0xd7/0xf0
[ 12.988248] dump_stack+0x10/0x20
[ 12.988250] ubsan_epilogue+0x9/0x40
[ 12.988253] __ubsan_handle_shift_out_of_bounds+0x10e/0x170
[ 12.988260] dma_resv_reserve_fences.cold+0x2b/0x48
[ 12.988262] ? ww_mutex_lock_interruptible+0x3c/0x110
[ 12.988267] drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[ 12.988271] ? vm_bind_ioctl_ops_execute+0x5b/0x740 [xe]
[ 12.988345] vm_bind_ioctl_ops_execute+0x78/0x740 [xe]
It is caused by the value 0 of parameter num_fences in function
drm_exec_prepare_obj. And lead to in function __rounddown_pow_of_two,
"0 - 1" causes the shift-out-of-bounds.
By design drm_exec_prepare_obj() should be called only when there are
fences to be reserved. If num_fences is 0, calling drm_exec_lock_obj()
is sufficient as was done in commit 9377de4cb3e8 ("drm/xe/vm: Avoid
reserving zero fences")
Niranjana Vishwanathapura [Tue, 7 May 2024 22:42:51 +0000 (15:42 -0700)]
drm/xe: Add Indirect Ring State support
When Indirect Ring State is enabled, the Ring Buffer state and
Batch Buffer state are context save/restored to/from Indirect
Ring State instead of the LRC. The Indirect Ring State is a 4K
page mapped in global GTT at a 4K aligned address. This address
is programmed in the INDIRECT_RING_STATE register of the
corresponding context's LRC.
v2: Fix kernel-doc, add bspec reference
v3: Fix typo in commit text
Lucas De Marchi [Mon, 6 May 2024 14:19:17 +0000 (07:19 -0700)]
drm/xe/ads: Use flexible-array
Zero-length arrays are deprecated and flexible arrays should be
used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/ Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Michal Wajdeczko [Tue, 7 May 2024 11:09:58 +0000 (13:09 +0200)]
drm/xe: Don't rely on xe_force_wake.h to be included elsewhere
While xe_force_wake.h is now included from the xe_device.h, we
want to drop that include as we don't need it there. Explicitly
include xe_force_wake.h where needed.
Michal Wajdeczko [Tue, 7 May 2024 11:09:57 +0000 (13:09 +0200)]
drm/xe: Don't rely on xe_assert.h to be included elsewhere
While xe_assert.h is now included and used by the xe_force_wake.h,
we want to stop include xe_force_wake.h from xe_device.h as it's
not needed there. Explicitly include xe_assert.h where needed.
drm/xe: skip error capture when exec queue is killed
When user closes exec queue soon after job submission,
we are generating error coredump. Instead check if
exec queue is killed during job timeout then skip
error coredump capture.
This is useful to check mocs configuration. Tests/Tools can use
this debugfs entry to get mocs info.
v2: Address review comments. Change debugfs output style similar
to pat debugfs. (Lucas De Marchi)
v3: rebase.
v4: Address review comments. Use function pointer inside ops
struct. Update Test-with links. Remove usage of flags wherever
not required. (Lucas De Marchi)
v5: Address review comments. Move register defines. Modify mocs
info struct to avoid holes. (Luca De Marchi)
Nirmoy Das [Tue, 30 Apr 2024 16:25:29 +0000 (18:25 +0200)]
drm/xe: Refactor default device atomic settings
The default behavior of device atomics depends on the
VM type and buffer allocation types. Device atomics are
expected to function with all types of allocations for
traditional applications/APIs. Additionally, in compute/SVM
API scenarios with fault mode or LR mode VMs, device atomics
must work with single-region allocations. In all other cases
device atomics should be disabled by default also on platforms
where we know device atomics doesn't on work on particular
allocations types.
v3: fault mode requires LR mode so only check for LR mode
to determine compute API(Jose).
Handle SMEM+LMEM BO's migration to LMEM where device
atomics is expected to work. (Brian).
v2: Fix platform checks to correct atomics behaviour on PVC.
Nirmoy Das [Tue, 30 Apr 2024 16:25:26 +0000 (18:25 +0200)]
drm/xe: Move vm bind bo validation to a helper function
Move vm bind bo validation to a helper function to make the
xe_vm_bind_ioctl() more readable.
v2: Capture ret value of xe_vm_bind_ioctl_validate_bo(Matt B).
Remove redundant coh_mode param.
Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Oak Zeng <oak.zeng@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430162529.21588-3-nirmoy.das@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Rodrigo Vivi [Fri, 3 May 2024 19:03:31 +0000 (15:03 -0400)]
drm/xe: Demote CCS_MODE info to debug only
This information is printed in any gt_reset, which actually
occurs in any runtime resume, what can be so verbose in
production build. Let's demote it to debug only.
Francois Dugast [Fri, 3 May 2024 08:24:50 +0000 (10:24 +0200)]
drm/xe/debugfs: Get a runtime_pm reference when setting wedged mode
This function is another entry point where it must be ensured that
the device resumes before operating on the GuC, so grab a runtime_pm
reference. This fixes inner xe_pm_runtime_get_noresume calls which
were previously failing.
Michal Wajdeczko [Thu, 2 May 2024 22:33:11 +0000 (00:33 +0200)]
drm/xe: Add helpers for manipulating macro arguments
Define generic helpers that will replace private definitions used
by the RTP code and will allow reuse by the new code.
Put them in new xe_args.h file (instead of infamous xe_macros.h)
as once we find more potential users outside of the Xe driver we
may want to move all of these macros as-is to linux/args.h.
Thomas Hellström [Thu, 2 May 2024 18:32:51 +0000 (20:32 +0200)]
drm/xe: Perform dma_map when moving system buffer objects to TT
Currently we dma_map on ttm_tt population and dma_unmap when
the pages are released in ttm_tt unpopulate.
Strictly, the dma_map is not needed until the bo is moved to the
XE_PL_TT placement, so perform the dma_mapping on such moves
instead, and remove the dma_mappig when moving to XE_PL_SYSTEM.
This is desired for the upcoming shrinker series where shrinking
of a ttm_tt might fail. That would lead to an odd construct where
we first dma_unmap, then shrink and if shrinking fails dma_map
again. If dma_mapping instead is performed on move like this,
shrinking does not need to care at all about dma mapping.
Finally, where a ttm_tt is destroyed while bound to a different
memory type than XE_PL_SYSTEM, we keep the dma_unmap in
unpopulate().
v2:
- Don't accidently unmap the dma-buf's sgtable.
Francois Dugast [Thu, 2 May 2024 12:43:10 +0000 (14:43 +0200)]
drm/xe/gt: Fix assert in L3 bank mask generation
What needs to be asserted is that the pattern fits in the number
of bits provided by the user in patternbits, otherwise it would
be truncated when replicated according to the mask, which is
likely not the intended use of this function.
The pattern argument is a bitmap so use find_last_bit() instead
of fls(). The bit position starts at index 0 so remove "or equal"
from the comparison. XE_MAX_L3_BANK_MASK_BITS would be the
returned value if the pattern is 0, which can be the case on some
platforms.
v2: Check the result does not overflow the array (Lucas De Marchi)
v3: Use __fls() for long and handle mask == 0 (Lucas De Marchi)
LNL has 1 GSCCS, same as MTL. Note that the GSCCS will be disabled until
we have a GSC FW defined, but having it in the list of engine is a
requirement to add such definition.
drm/xe/gsc: Turn off GSCCS interrupts when disabling the engine
Starting on LNL, there is a new GSCCS interrupt that is triggered when
the GSC engine reset fails. If the HW is in a bad state, this interrupt
might end up being triggered even if we're not using the engine, which
will lead to a warning because we'll see it as unexpected. Since there
is no point in handling the interrupt in this scenario, we can just
make sure the interrupts are off when we disable the engine.
Nirmoy Das [Mon, 29 Apr 2024 20:30:39 +0000 (22:30 +0200)]
drm/xe: Remove uninitialized end var from xe_gt_tlb_invalidation_range()
This fixes commit c4f18703629d ("drm/xe: Add
xe_gt_tlb_invalidation_range and convert PT layer to use this")
which added the end variable as part of the function param.
v2: Add fixes tag(Matt)
Fixes: c4f18703629d ("drm/xe: Add xe_gt_tlb_invalidation_range and convert PT layer to use this") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240429203039.26918-1-nirmoy.das@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Dave Airlie [Tue, 30 Apr 2024 04:20:31 +0000 (14:20 +1000)]
Merge tag 'drm-intel-gt-next-2024-04-26' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915/guc: Use context hints for GT frequency
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
- drm/i915/gt: Enable only one CCS for compute workload
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance
***
NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by
default to mitigate a hardware bug. All the EUs will still remain
usable, and all the userspace drivers have been confirmed to be able
to dynamically detect the change in number of CCS engines and adjust.
For the smaller percent of applications that get perf benefit from
letting the userspace driver dispatch across all 4 CCS engines we will
be introducing a sysfs control as a later patch to choose 4 CCS each
with 25% EUs (or 50% if 2 CCS).
- Add new and fix to existing workarounds: Wa_14018575942 (MTL),
Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438,
Wa_14020495402 (Gen12.70) (Tejas, John, Lucas)
- Fix UAF on destroy against retire race and remove two earlier
partial fixes (Janusz)
- Limit the reserved VM space to only the platforms that need it (Andi)
- Reset queue_priority_hint on parking for execlist platforms (Chris)
- Fix gt reset with GuC submission is disabled (Nirmoy)
- Correct capture of EIR register on hang (John)
- Remove usage of the deprecated ida_simple_xx() API
- Refactor confusing __intel_gt_reset() (Nirmoy)
- Fix the fix for GuC reset lock confusion (John)
- Simplify/extend platform check for Wa_14018913170 (John)
- Replace dev_priv with i915 (Andi)
- Add and use gt_to_guc() wrapper (Andi)
- Remove bogus null check (Rodrigo, Dan)
In order to detect duplicate implementations for the same workaround,
early in the implementation of RTP it was decided to error out even if
the values set are exactly the same. With the introduction of 18034896535
in commit 74671d23ca18 ("drm/xe/xe2: Add workaround 18034896535"), LNL
stepping with graphics stepping A1 now gives the following error on
module load:
Merge tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
Merge tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") Reported-by: Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Phil Auld <pauld@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Merge tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
Merge tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Merge tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
Merge tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
Wolfram Sang [Fri, 26 Apr 2024 06:44:08 +0000 (08:44 +0200)]
i2c: smbus: fix NULL function pointer dereference
Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il> Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il Fixes: 4b1acc43331d ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Baruch Siach <baruch@tkos.co.il>
Merge tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
Jack Xiao [Wed, 24 Apr 2024 08:41:04 +0000 (16:41 +0800)]
drm/amdgpu/mes11: update ADD_QUEUE interface
Update ADD_QUEUE interface for mes11 to support
mes mapping legacy queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear warning that uses uninitialized value fw_size.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Adjust registers sequence in the DIO list
This commit reorganizes the order in which some control registers are
presented to make it easier to identify the operations based on the
hardware doc.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we have two flags for contiguous VRAM buffer allocation.
If the application request for AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS,
it would set the ttm place TTM_PL_FLAG_CONTIGUOUS flag in the
buffer's placement function.
This patch will change the default behaviour of the two flags.
When we set AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS
- This means contiguous is not mandatory.
- we will try to allocate the contiguous buffer. Say if the
allocation fails, we fallback to allocate the individual pages.
When we setTTM_PL_FLAG_CONTIGUOUS
- This means contiguous allocation is mandatory.
- we are setting this in amdgpu_bo_pin_restricted() before bo validation
and check this flag in the vram manager file.
- if this is set, we should allocate the buffer pages contiguously.
the allocation fails, we return -ENOSPC.
v2:
- keep the mem_flags and bo->flags check as is(Christian)
- place the TTM_PL_FLAG_CONTIGUOUS flag setting into the
amdgpu_bo_pin_restricted function placement range iteration
loop(Christian)
- rename find_pages with amdgpu_vram_mgr_calculate_pages_per_block
(Christian)
- Keep the kernel BO allocation as is(Christain)
- If BO pin vram allocation failed, we need to return -ENOSPC as
RDMA cannot work with scattered VRAM pages(Philip)
v3(Christian):
- keep contiguous flag handling outside of pages_per_block
calculation
- remove the hacky implementation in contiguous flag error
handling code
v4(Christian):
- use any variable and return value for non-contiguous
fallback
v5: rebase to amd-staging-drm-next branch
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 16 Apr 2024 04:16:08 +0000 (22:16 -0600)]
drm/amd/display: Fix uninitialized variables in DC
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 16 Apr 2024 01:05:34 +0000 (19:05 -0600)]
drm/amd/display: Fix uninitialized variables in DC
This fixes 49 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 16 Apr 2024 01:02:56 +0000 (19:02 -0600)]
drm/amd/display: Fix uninitialized variables in DM
This fixes 11 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Mon, 22 Apr 2024 18:02:17 +0000 (12:02 -0600)]
drm/amd/display: ASSERT when failing to find index by plane/stream id
[WHY]
find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns
an array index and they return -1 when not found; however, -1 is not a
valid index number.
[HOW]
When this happens, call ASSERT(), and return a positive number (which is
fewer than callers' array size) instead.
This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Mon, 22 Apr 2024 19:43:14 +0000 (13:43 -0600)]
drm/amd/display: Do not return negative stream id for array
[WHY]
resource_stream_to_stream_idx returns an array index and it return -1
when not found; however, -1 is not a valid array index number.
[HOW]
When this happens, call ASSERT(), and return a zero instead.
This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix overlapping copy within dml_core_mode_programming
[WHY]
&mode_lib->mp.Watermark and &locals->Watermark are
the same address. memcpy may lead to unexpected behavior.
[HOW]
memmove should be used.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Mon, 22 Apr 2024 19:52:27 +0000 (13:52 -0600)]
drm/amd/display: Skip finding free audio for unknown engine_id
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 23 Apr 2024 00:07:17 +0000 (18:07 -0600)]
drm/amd/display: Check pipe offset before setting vblank
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lancelot SIX [Wed, 3 Apr 2024 09:21:24 +0000 (10:21 +0100)]
drm/amdkfd: Enable SQ watchpoint for gfx10
There are new control registers introduced in gfx10 used to configure
hardware watchpoints triggered by SMEM instructions:
SQ_WATCH{0,1,2,3}_{CNTL_ADDR_HI,ADDR_L}.
Those registers work in a similar way as the TCP_WATCH* registers
currently used for gfx9 and above.
This patch adds support to program the SQ_WATCH registers for gfx10.
The SQ_WATCH?_CNTL.MASK field has one bit more than
TCP_WATCH?_CNTL.MASK, so SQ watchpoints can have a finer granularity
than TCP_WATCH watchpoints. In this patch, we keep the capabilities
advertised to the debugger unchanged
(HSA_DBG_WATCH_ADDR_MASK_*_BIT_GFX10) as this reflects what both TCP and
SQ watchpoints can do and both watchpoints are configured together.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Thu, 18 Apr 2024 19:27:43 +0000 (13:27 -0600)]
drm/amd/display: Check index msg_id before read or write
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix buffer size in gfx_v9_4_3_init_ cp_compute_microcode() and rlc_microcode()
The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating
about potential truncation of output when using the snprintf function.
The issue was due to the size of the buffer 'ucode_prefix' being too
small to accommodate the maximum possible length of the string being
written into it.
The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin",
where %s is replaced by the value of 'chip_name'. The length of this
string without the %s is 16 characters. The warning message indicated
that 'chip_name' could be up to 29 characters long, resulting in a total
of 45 characters, which exceeds the buffer size of 30 characters.
To resolve this issue, the size of the 'ucode_prefix' buffer has been
reduced from 30 to 15. This ensures that the maximum possible length of
the string being written into the buffer will not exceed its size, thus
preventing potential buffer overflow and truncation issues.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~
......
439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~
......
443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix);
| ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30
413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 86301129698b ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0") Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add NULL pointer check for kzalloc
[Why & How]
Check return pointer of kzalloc before using it.
Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix ras mode2 reset failure in ras aca mode
Fix ras mode2 reset failure in ras aca mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / dwmw2 / linux.git / log