Merge tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers
Apple SoC driver updates for 6.18
Krzysztof Kozlowski asked us to move away from generic compatibles:
- Adjust all dt-bindings to use apple,t8103-XXXX instead of apple,XXXX
as fallback and add a comment that the old generic list should no
longer be extended.
- Add new fallback compatibles to pinctrl, pmdomain, spi, and mca
drivers. These changes have been Acked by their subsystem maintainers
to be merged through our tree together with the dt-bindings.
Support for pre-M1 Apple Silicon:
- SART and mailbox gain support for Apple's A11, which are both
required for NVMe.
- NVMe also gains support for Apple's A11 and the nvme maintainers
prefer that we merge this through the soc tree together with
the mailbox and SART changes.
- SPMI compatibles for A11 and T2 have been added, also going through
the soc tree due to conflicts with the generic compatible removal and
because no driver change is required.
Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Janne Grunau [Thu, 28 Aug 2025 14:01:22 +0000 (16:01 +0200)]
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
In Qualcomm SoCs, firmware loading for Serial Engines (SE) within the QUP
hardware has traditionally been managed by TrustZone (TZ). This restriction
poses a significant challenge for developers, as it limits their ability to
enable various protocols on any of the SEs from the Linux side, reducing
flexibility.
Load the firmware to QUP SE based on the 'firmware-name' property specified
in devicetree at bootup time.
soc: qcom: geni-se: Cleanup register defines and update copyright
Refactor register macros for consistency and clarity and remove redundant
definitions and update naming for better alignment.
Update copyright to include Qualcomm Technologies, Inc.
Merge tag 'microchip-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip ARM64 SoC updates for v6.18:
This update includes:
- basic infrastructure support for Microchip LAN969x SoC
- SoC ARCH symbols (existing SparX-5, new LAN969x) under the
ARCH_MICROCHIP hidden symbol (already in use by AT91 in 6.17)
- addition of that new symbol for drivers that are shared by
Microchip SoC-s now and in the future
* tag 'microchip-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
crypto: atmel-aes: make it selectable for ARCH_MICROCHIP
char: hw_random: atmel: make it selectable for ARCH_MICROCHIP
i2c: at91: make it selectable for ARCH_MICROCHIP
spi: atmel: make it selectable for ARCH_MICROCHIP
tty: serial: atmel: make it selectable for ARCH_MICROCHIP
mfd: at91-usart: Make it selectable for ARCH_MICROCHIP
arm64: lan969x: Add support for Microchip LAN969x SoC
arm64: Add config for Microchip SoC platforms
Merge tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates/fixes for v6.18
These SCMI changes bring a mix of improvements, fixes, and cleanups:
1. Device Tree bindings - allow multiple SCMI instances by suffixing
node names (Nikunj Kela).
2. Code hardening - constify both scmi_{transport,voltage_proto}_ops
so they reside in read-only memory (Christophe JAILLET).
3. VirtIO transport initialization - set DRIVER_OK before SCMI probing
to prevent potential stalls; while recent rework removes the practical
risk, this ensures correctness (Junnan Wu).
4. Quirk handling - fix a critical bug by preventing writes to string
constants, avoiding faults in read-only memory (Johan Hovold).
5. i.MX SCMI MISC protocol - extend support to discover board info,
retrieve configuration and build data, and document the new
MISC_BOARD_INFO command; all handled gracefully if unsupported (Peng Fan).
6. Logging cleanup - simplify device tree node name logging by using
the %pOF format to print full paths (Krzysztof Kozlowski).
* tag 'scmi-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Simplify printks with pOF format
firmware: arm_scmi: imx: Discover MISC board info from the system manager
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
firmware: arm_scmi: imx: Discover MISC build info from the system manager
firmware: arm_scmi: imx: Add documentation for MISC_BOARD_INFO
firmware: arm_scmi: quirk: Prevent writes to string constants
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
firmware: arm_scmi: Mark VirtIO ready before registering scmi_virtio_driver
firmware: arm_scmi: Constify struct scmi_transport_ops
firmware: arm_scmi: Constify struct scmi_voltage_proto_ops
dt-bindings: firmware: arm,scmi: Allow multiple instances
Merge tag 'samsung-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.18
1. Google GS101:
Enable CPU Idle, which needs programming C2 idle hints
via ACPM firmware (Alive Clock and Power Manager). The patch
introducing this depends on 'local-timer-stop' Devicetree property,
which was merged in v6.17.
Fix handling error codes in ACPM firmware driver when talking to
PMIC.
2. Exynos2200: Add dedicated compatible for serial engines (USI).
* tag 'samsung-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix PMIC returned errno
dt-bindings: soc: samsung: usi: add samsung,exynos2200-usi compatible
soc: samsung: exynos-pmu: Enable CPU Idle for gs101
Merge tag 'tee-prot-dma-buf-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE protected DMA-bufs for v6.18
- Allocates protected DMA-bufs from a DMA-heap instantiated from the TEE
subsystem.
- The DMA-heap uses a protected memory pool provided by the backend TEE
driver, allowing it to choose how to allocate the protected physical
memory.
- Three use-cases (Secure Video Playback, Trusted UI, and Secure Video
Recording) have been identified so far to serve as examples of what
can be expected.
- The use-cases have predefined DMA-heap names,
"protected,secure-video", "protected,trusted-ui", and
"protected,secure-video-record". The backend driver registers protected
memory pools for the use-cases it supports.
* tag 'tee-prot-dma-buf-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: smc abi: dynamic protected memory allocation
optee: FF-A: dynamic protected memory allocation
optee: support protected memory allocation
tee: add tee_shm_alloc_dma_mem()
tee: new ioctl to a register tee_shm from a dmabuf file descriptor
tee: refactor params_from_user()
tee: implement protected DMA-heap
dma-buf: dma-heap: export declared functions
optee: sync secure world ABI headers
Merge tag 'tee-improve-sysfs-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
Use sysfs_emit() for sysfs buffers to userspace
* tag 'tee-improve-sysfs-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
drivers: tee: improve sysfs interface by using sysfs_emit()
Merge tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.18
Allowlist the uefisec application, to provide UEFI variable access on
Dell Inspiron 7441 and Latitude 7455, the Hamoa EVK, and the Lenovo
Thinkbook 16.
Disable tzmem on the SC7180 platform, as this causes problems with
rmtfs.
Clean up unused, lingering, parameters in the MDT loader API.
Unconditinally clear TCS trigger bit, to avoid false completion IRQs in
the RPMh/RSC driver. Fix endianess issue in SMEM driver.
Add pd-mapper support for SM8750.
* tag 'qcom-drivers-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: disable sc7180 platform
soc: qcom: use devm_kcalloc() for array space allocation
dt-bindings: firmware: qcom,scm: Add MSM8937
firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude 7455
firmware: qcom: scm: Allow QSEECOM on Lenovo Thinkbook 16
soc: qcom: rpmh-rsc: Unconditionally clear _TRIGGER bit for TCS
soc: qcom: pd-mapper: Add SM8750 compatible
soc: qcom: icc-bwmon: Fix handling dev_pm_opp_find_bw_*() errors
soc: remove unneeded 'fast_io' parameter in regmap_config
soc: qcom: smem: Fix endian-unaware access of num_entries
dt-bindings: soc: qcom,rpmh-rsc: Remove double colon from description
dt-bindings: sram: qcom,imem: Document IPQ5424 compatible
firmware: qcom: scm: Allow QSEECOM on HAMOA-IOT-EVK
soc: qcom: mdt_loader: Remove unused parameter
soc: qcom: mdt_loader: Remove pas id parameter
soc: qcom: mdt_loader: Remove unused parameter
firmware: qcom: scm: preserve assign_mem() error return value
Merge tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux into soc/drivers
This pull request contains Broadcom SoC drivers updates for 6.18:
- Andrea adds the missing MIPI DSI clock defines for the RP1 and then
continues to implement the remaining clocks for the RP1 chip (ADC,
I2S, Audio in/out, DMA, MIPI, PWM, SDIO, UART, encoder)
- Akhilesh fixes a spelling typo in the bcm47xx_sprom driver
- Brian converts the RP1 clock driver to use the new determine_rate()
API
* tag 'arm-soc/for-6.18/drivers' of https://github.com/Broadcom/stblinux:
clk: rp1: convert from round_rate() to determine_rate()
drivers: firmware: bcm47xx_sprom: fix spelling
clk: rp1: Implement remaining clock tree
dt-bindings: clock: rp1: Add missing MIPI DSI defines
Merge tag 'reset-for-v6.18' of https://git.pengutronix.de/git/pza/linux into soc/drivers
Reset controller updates for v6.18
* Fix the reset tree git repository link in MAINTAINERS.
* Add support for bcm63xx ephy reset control to reset-bcm6345.
* Add support for the AST2700 reset controller, as an auxiliary
device driver to the corresponding clock controller driver.
* Add support for the remaining TH1520 VO subsystem reset controls to
reset-th1520.
* Drop unnecessary .fast_io setting from MMIO regmap_configs.
* tag 'reset-for-v6.18' of https://git.pengutronix.de/git/pza/linux:
reset: remove unneeded 'fast_io' parameter in regmap_config
reset: th1520: add resets for display pipeline
dt-bindings: reset: thead,th1520-reset: add more VOSYS resets
reset: aspeed: register AST2700 reset auxiliary bus device
reset: bcm6345: add support for bcm63xx ephy control register
dt-bindings: reset: add compatible for bcm63xx ephy control
MAINTAINERS: Use https:// protocol for Reset Controller Framework tree
firmware: qcom: scm: add support for object invocation
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Janne Grunau [Thu, 28 Aug 2025 14:52:09 +0000 (16:52 +0200)]
spi: apple: Add "apple,t8103-spi" compatible
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,spi" anymore [1]. Use
"apple,t8103-spi" as base compatible as it is the SoC the driver and
bindings were written for.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,mca" anymore [1]. Use
"apple,t8103-mca" as base compatible as it is the SoC the driver and
bindings were written for.
Janne Grunau [Thu, 28 Aug 2025 14:01:27 +0000 (16:01 +0200)]
pinctrl: apple: Add "apple,t8103-pinctrl" as compatible
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pinctrl" anymore [1]. Use
"apple,t8103-pinctrl" as fallback compatible as it is the SoC the driver
and bindings were written for.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,spi" anymore [1]. Use
"apple,t8103-spi" as base compatible as it is the SoC the driver and
bindings were written for.
The SPI controller on Apple M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-spi" so add its per-SoC compatible with the former as
fallback used by the existing driver.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,mca" anymore [1]. Use
"apple,t8103-mca" as base compatible as it is the SoC the driver and
bindings were written for.
mca on Apple's M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-mca" so add its per-SoC compatible with the former as
fallbeck used by the existing driver.
Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Janne Grunau <j@jannau.net>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,admac" anymore [1]. Use
"apple,t8103-admac" as base compatible as it is the SoC the driver and
bindings were written for.
admac on Apple's M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-admac" so add its per-SoC compatible with the former as
fallback used by the existing driver.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nco" anymore [1]. Use
"apple,t8103-nco" as base compatible as it is the SoC the driver and
bindings were written for.
The block found on Apple's M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-nco" so add its per-SoC compatible with the former as
fallback used by the existing driver.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,wdt" anymore [1]. Use
"apple,t8103-wdt" as base compatible as it is the SoC the driver and
bindings were written for.
The block on the Apple M2 Pro/Max/Ultra SoCs is compatible with the
existing driver so add its per-SoC compatible.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,spmi" anymore [1]. Use
"apple,t8103-spmi" as base compatible as it is the SoC the driver and
bindings were written for.
The SPMI controller on Apple M2 Pro/Max/Ultra is compatible to
"apple,t8103-spmi" so add its per-SoC compatible with the former as
fallback used by the existing driver.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,smc" anymore [1]. Use
"apple,t8103-smc" as base compatible as it is the SoC the driver and
bindings were written for.
SMC on Apple's M2 Pro/Max/Ultra SoCs is compatible with the existing
driver so add its per-SoC compatible with the new base compatible as
fallback used by the driver.
Add BCM4388 PCI vendor/product ID as compatible. The BCM4388 WiFi/BT
module is found on Apple silicon devices with M2 Pro/Max/Ultra and
later. Support for this variant was added in 2024 without amending the
dt-bindings.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nvme-ans2" anymore [1]. Add
"apple,t8103-nvme-ans2" as fallback compatible as it is the SoC the
driver and bindings were written for.
Invert the condition for the 2 or 3 power-domains check to allow using
"apple,t8103-nvme-ans2" as base compatible.
"apple,t6020-nvme-ans2" on Apple M2 Pro/Max/Ultra SoCs is compatible
with "apple,t8103-nvme-ans2" so add its per-SoC compatible.
"apple,t6020-sart" as found in Apple's M2 Pro/Max/Ultra SoCs is
compatible with SART3 used in t6000. Add its per-SoC compatible to allow
a distinction should it become necessary.
Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Janne Grunau <j@jannau.net>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pinctrl" anymore [1]. Use
"apple,t8103-pinctrl" as fallback compatible as it is the SoC the driver
and bindings were written for.
The M2 Pro/Max/Ultra SoCs use the same pinctrl hardware, so just add its
per-SoC compatible using the new base as fallback.
t6020-dart is compatible to t8110-dart and annotated as such in Apple's
device tree. Add its per-SoC compatible in case t6020 specific handling
becomes necessary. The dart instances on M2 Pro/Max/Ultra based SoCs
differ in one aspect from the M2 based ones. They indicate an IAS of 42
requiring implementing support for a fouth page table level in the dart
driver and its io-pgtable [1].
The Apple M2 Pro/Max/Ultra SoCs use AIC2 as interrupt controller. This
is the final SoC added as compatible as Apple M3 and later use AIC3.
Apple's A15 uses AIC2 as well but has no official support for alternate
operating systems.
Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Janne Grunau <j@jannau.net>
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
The implementation on Apple M2 Pro/Max/Ultra SoCs is compatible so add
its per-SoC compatible with the new base.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr" anymore [1]. Use
"apple,t8103-pmgr" as base compatible as it is the SoC the bindings were
written for.
The block on Apple M2 Pro/Max/Ultra SoCs is compatible with
"apple,t8103-pmgr" so use it as fallback compatible and add t6020 as
per-SoC compatible.
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Jens Wiklander [Wed, 13 Aug 2025 06:02:57 +0000 (08:02 +0200)]
optee: FF-A: dynamic protected memory allocation
Add support in the OP-TEE backend driver dynamic protected memory
allocation with FF-A.
The protected memory pools for dynamically allocated protected memory
are instantiated when requested by user-space. This instantiation can
fail if OP-TEE doesn't support the requested use-case of protected
memory.
Restricted memory pools based on a static carveout or dynamic allocation
can coexist for different use-cases. We use only dynamic allocation with
FF-A.
Jens Wiklander [Wed, 13 Aug 2025 06:02:55 +0000 (08:02 +0200)]
tee: add tee_shm_alloc_dma_mem()
Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is
represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to
identify it as DMA memory. The allocated memory will later be lent to
the TEE to be used as protected memory.
Etienne Carriere [Wed, 13 Aug 2025 06:02:54 +0000 (08:02 +0200)]
tee: new ioctl to a register tee_shm from a dmabuf file descriptor
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Jens Wiklander [Wed, 13 Aug 2025 06:02:52 +0000 (08:02 +0200)]
tee: implement protected DMA-heap
Implement DMA heap for protected DMA-buf allocation in the TEE
subsystem.
Protected memory refers to memory buffers behind a hardware enforced
firewall. It is not accessible to the kernel during normal circumstances
but rather only accessible to certain hardware IPs or CPUs executing in
higher or differently privileged mode than the kernel itself. This
interface allows to allocate and manage such protected memory buffers
via interaction with a TEE implementation.
The protected memory is allocated for a specific use-case, like Secure
Video Playback, Trusted UI, or Secure Video Recording where certain
hardware devices can access the memory.
The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE
backend drivers needs to implement protected memory pool to manage the
protected memory.
Jens Wiklander [Wed, 13 Aug 2025 06:02:51 +0000 (08:02 +0200)]
dma-buf: dma-heap: export declared functions
Export the dma-buf heap functions to allow them to be used by the OP-TEE
driver. The OP-TEE driver wants to register and manage specific secure
DMA heaps with it.
Jens Wiklander [Wed, 13 Aug 2025 06:02:50 +0000 (08:02 +0200)]
optee: sync secure world ABI headers
Update the header files describing the secure world ABI, both with and
without FF-A. The ABI is extended to deal with protected memory, but as
usual backward compatible.
Johan Hovold [Tue, 9 Sep 2025 09:56:51 +0000 (11:56 +0200)]
soc: mediatek: mtk-svs: fix device leaks on mt8192 probe failure
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 0bbb09b2af9d ("soc: mediatek: SVS: add mt8192 SVS GPU driver") Cc: Roger Lu <roger.lu@mediatek.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250909095651.5530-3-johan@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Johan Hovold [Tue, 9 Sep 2025 09:56:50 +0000 (11:56 +0200)]
soc: mediatek: mtk-svs: fix device leaks on mt8183 probe failure
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine") Cc: Roger Lu <roger.lu@mediatek.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250909095651.5530-2-johan@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Peng Fan [Thu, 4 Sep 2025 10:40:45 +0000 (18:40 +0800)]
firmware: arm_scmi: imx: Discover MISC board info from the system manager
The i.MX SCMI MISC protocol can report board information from the
System Manager (SM), including a board name and board-specific
attributes. Query this during protocol initialization.
If the firmware does not implement BOARD_INFO, handle -EOPNOTSUPP
gracefully and continue.
Robert Marko [Wed, 13 Aug 2025 17:44:45 +0000 (19:44 +0200)]
crypto: atmel-aes: make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel crypto, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:44 +0000 (19:44 +0200)]
char: hw_random: atmel: make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel HWRNG, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:43 +0000 (19:44 +0200)]
i2c: at91: make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:42 +0000 (19:44 +0200)]
spi: atmel: make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel SPI, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:41 +0000 (19:44 +0200)]
tty: serial: atmel: make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel USART serial, so make it selectable for
ARCH_MICROCHIP to avoid needing to update depends in future if other
Microchip SoC-s use it as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:40 +0000 (19:44 +0200)]
mfd: at91-usart: Make it selectable for ARCH_MICROCHIP
LAN969x uses the Atmel USART, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Daniel Machon <daniel.machon@microchip.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Peng Fan [Thu, 4 Sep 2025 10:40:44 +0000 (18:40 +0800)]
firmware: arm_scmi: imx: Support retrieving MISC protocol configuration info
The MISC protocol can provide System Manager (SM) configuration
information, including platform identifiers and board-specific
attributes. Add support to retrieve this information during protocol
initialization.
If the firmware does not implement the CFG_INFO command, handle
-EOPNOTSUPP gracefully and continue without failing init.
Peng Fan [Thu, 4 Sep 2025 10:40:43 +0000 (18:40 +0800)]
firmware: arm_scmi: imx: Discover MISC build info from the system manager
MISC protocol can report System Manager (SM) build information (commit,
build date/time, etc.). Discover those information at the init time.
If the firmware doesn't support it, ignore -EOPNOTSUPP.
Nick Chan [Thu, 21 Aug 2025 15:56:40 +0000 (23:56 +0800)]
dt-bindings: iommu: apple,sart: Add Apple A11
Add apple,t8015-sart for SARTv0 found on the Apple A11 SoC, which
uses a different MMIO layout and is thus incompatible with the
previously described versions
Reviewed-by: Sven Peter <sven@kernel.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Link: https://lore.kernel.org/r/20250821-t8015-nvme-v3-3-14a4178adf68@gmail.com
[sven: adjusted commit message] Signed-off-by: Sven Peter <sven@kernel.org>
Robert Marko [Wed, 13 Aug 2025 17:44:39 +0000 (19:44 +0200)]
arm64: lan969x: Add support for Microchip LAN969x SoC
This adds support for the Microchip LAN969x ARMv8-based SoC switch family.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Robert Marko [Wed, 13 Aug 2025 17:44:37 +0000 (19:44 +0200)]
arm64: Add config for Microchip SoC platforms
Currently, Microchip SparX-5 SoC is supported and it has its own symbol.
However, this means that new Microchip platforms that share drivers need
to constantly keep updating depends on various drivers.
So, to try and reduce this lets add ARCH_MICROCHIP symbol that drivers
could instead depend on.
LAN969x is being worked on and it will be added under ARCH_MICROCHIP.
Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Brian Masney [Fri, 29 Aug 2025 00:38:23 +0000 (20:38 -0400)]
clk: rp1: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Andrea della Porta [Mon, 23 Jun 2025 21:46:28 +0000 (23:46 +0200)]
clk: rp1: Implement remaining clock tree
The RP1 clock generator driver currently defines only the fundamental
clocks such as the front PLLs for system, audio and video subsystems
and the ethernet clock.
Add the remaining clocks to the tree so as to be completed, which means
that the following RP1 peripherals could now consume their specific clocks
and be enabled to work (provided that the relevant driver changes for each
specific peripheral, if any, are committed):
Johan Hovold [Fri, 29 Aug 2025 13:21:52 +0000 (15:21 +0200)]
firmware: arm_scmi: quirk: Prevent writes to string constants
The quirk version range is typically a string constant and must not be
modified (e.g. as it may be stored in read-only memory). Attempting
to do so can trigger faults such as:
| Unable to handle kernel write to read-only memory at virtual
| address ffffc036d998a947
Update the range parsing so that it operates on a copy of the version
range string, and mark all the quirk strings as const to reduce the
risk of introducing similar future issues.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220437 Fixes: 487c407d57d6 ("firmware: arm_scmi: Add common framework to handle firmware quirks") Cc: stable@vger.kernel.org # 6.16 Cc: Cristian Marussi <cristian.marussi@arm.com> Reported-by: Jan Palus <jpalus@fastmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Message-Id: <20250829132152.28218-1-johan@kernel.org>
[sudeep.holla: minor commit message rewording; switch to cleanup helpers] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Peng Fan [Sun, 31 Aug 2025 06:52:37 +0000 (14:52 +0800)]
firmware: arm_scmi: Fix function name typo in scmi_perf_proto_ops struct
The performance protocol ops table incorrectly referenced
power_scale_mw_get instead of the correct power_scale_get.
Fix the typo to use the proper function.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250831-scmi-cpufreq-v1-1-493031cf6e9b@nxp.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge tag 'renesas-drivers-for-v6.18-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.18
- Add syscon/regmap support to the RZ System Controller driver.
* tag 'renesas-drivers-for-v6.18-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rz-sysc: Add syscon/regmap support
Merge tag 'aspeed-6.18-drivers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/drivers
Early ASPEED driver updates for 6.18
Two small changes, the most interesting being the addition of the silicon IDs
for ASPEED's AST2700 SoC family.
* tag 'aspeed-6.18-drivers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: socinfo: Add AST27xx silicon IDs
soc: aspeed: Use of_reserved_mem_region_to_resource() for "memory-region"
Linus Torvalds [Sun, 31 Aug 2025 16:20:17 +0000 (09:20 -0700)]
Merge tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
Linus Torvalds [Sun, 31 Aug 2025 16:13:00 +0000 (09:13 -0700)]
Merge tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a stall on the CPU offline path due to mis-counting a deadline
server task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer
whose expiration time is already in the past would cause repeated
attempts to re-enqueue a deadline server task which leads to starving
the former, realtime one
- Prevent a delayed deadline server task stop from breaking the
per-runqueue bandwidth tracking
- Have a function checking whether the deadline server task has
stopped, return the correct value
* tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Don't count nr_running for dl_server proxy tasks
sched/deadline: Fix RT task potential starvation when expiry time passed
sched/deadline: Always stop dl-server before changing parameters
sched/deadline: Fix dl_server_stopped()
Linus Torvalds [Sun, 31 Aug 2025 16:07:37 +0000 (09:07 -0700)]
Merge tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Remove unnecessary and noisy WARN_ONs in gic-v5's init path
- Avoid a kmemleak false positive for the gic-v5's L2 IST table entries
- Fix a retval check in mvebu-gicp's probe function
- Fix a wrong conversion to guards in atmel-aic[5] irqchip
* tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v5: Remove undue WARN_ON()s in the IRS affinity parsing
irqchip/gic-v5: Fix kmemleak L2 IST table entries false positives
irqchip/mvebu-gicp: Fix an IS_ERR() vs NULL check in probe()
irqchip/atmel-aic[5]: Fix incorrect lock guard conversion
Linus Torvalds [Sun, 31 Aug 2025 15:56:45 +0000 (08:56 -0700)]
Merge tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- ARM: stacktrace: include asm/sections.h in asm/stacktrace.h (Arnd
Bergmann)
- ubsan: Fix incorrect hand-side used in handle (Junhui Pei)
- hardening: Require clang 20.1.0 for __counted_by (Nathan Chancellor)
* tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Require clang 20.1.0 for __counted_by
ARM: stacktrace: include asm/sections.h in asm/stacktrace.h
ubsan: Fix incorrect hand-side used in handle
Linus Torvalds [Sun, 31 Aug 2025 15:49:55 +0000 (08:49 -0700)]
Merge tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an off-by-one bug in interrupt handling in gpio-timberdale
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change Altera-PIO driver maintainer
gpio: timberdale: fix off-by-one in IRQ type boundary check
Linus Torvalds [Sat, 30 Aug 2025 17:43:53 +0000 (10:43 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- CFI failure due to kpti_ng_pgd_alloc() signature mismatch
- Underallocation bug in the SVE ptrace kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: Don't open code SVE_PT_SIZE() in fp-ptrace
arm64: mm: Fix CFI failure due to kpti_ng_pgd_alloc function signature
projects / users / jedix / linux-maple.git / log