Enable fdinfo for GuC based platforms with the exception that long
running contexts will not provide reliable busyness data unless they
switch out at some reasonable point in time.
i915/pmu: Add support for total context runtime for GuC back-end
GPU accumulates the context runtime in a 32 bit counter - CTX_TIMESTAMP
in the context image. This value is saved/restored on context switches.
KMD accumulates these values into a 64 bit counter taking care of any
overflows as needed. This count provides the basis for client specific
busyness in the fdinfo interface.
KMD accumulation happens just before the context is unpinned and when
context switches out. This works for execlist back-end since execlist
scheduling has visibility into context switches. With GuC mode, KMD does
not have visibility into context switches and this counter is
accumulated only when context is unpinned. Context is unpinned once the
context scheduling is successfully disabled. Disabling context
scheduling is an asynchronous operation. Also if a context is servicing
frequent requests, scheduling may never be disabled on it.
For GuC mode, since updates to the context runtime may be delayed, add
hooks to update the context runtime in a worker thread as well as when
a user queries for it.
Limitation:
- If a context is never switched out or runs for a long period of time,
the runtime value of CTX_TIMESTAMP may never be updated, so the
counter value may be unreliable. This patch does not support such
cases. Such support must be available from the GuC FW and it is WIP.
This patch is an extract from previous work authored by John/Umesh here -
https://patchwork.freedesktop.org/patch/496441/?series=105085&rev=4
v2: (Ashutosh)
- Drop COPS_RUNTIME_ACTIVE_TOTAL
- s/guc_context_update_clks/__guc_context_update_stats
- Pin context before accessing in guc_timestamp_ping
- In guc_context_unpin, use spinlock to serialize access to runtime stats
drm/i915/guc/slpc: Provide sysfs for efficient freq
SLPC enables use of efficient freq at init by default. It is
possible for GuC to request frequencies that are higher than
the 'software' max if user has set it lower than the efficient
level.
Scenarios/tests that require strict fixing of freq below the efficient
level will need to disable it through this interface.
v2: Keep just one interface to toggle sysfs. With this, user will
be completely responsible for toggling efficient frequency if need
be. There will be no implicit disabling when user sets min < RP1 (Ashutosh)
Jonathan Cavitt [Wed, 26 Apr 2023 21:28:49 +0000 (23:28 +0200)]
drm/i915: Use correct huge page manager for MTL
MTL currently uses gen8_ppgtt_insert_huge when managing huge pages.
This is because MTL reports as not supporting 64K pages, or more
accurately, the system that reports whether a platform has 64K pages
reports false for MTL. This is only half correct, as the 64K page support
reporting system only cares about 64K page support for LMEM, which MTL
doesn't have.
MTL should be using xehpsdv_ppgtt_insert_huge. However, simply changing
over to using that manager doesn't resolve the issue because MTL is
expecting the virtual address space for the page table to be flushed after
initialization, so we must also add a flush statement there.
Jonathan Cavitt [Wed, 26 Apr 2023 21:28:48 +0000 (23:28 +0200)]
drm/i915: Migrate platform-dependent mock hugepage selftests to live
Convert the igt_mock_ppgtt_huge_fill and igt_mock_ppgtt_64K mock selftests
into live selftests as their requirements have recently become
platform-dependent. Additionally, apply necessary platform dependency
checks to these tests.
v8:
- handle properly 64K and 2M pages
v9:
- do not expect 64K pages if 2M are present
- fix hex printing
- obey commit message line limit
Ashutosh Dixit [Thu, 20 Apr 2023 16:40:40 +0000 (09:40 -0700)]
drm/i915/guc: Disable PL1 power limit when loading GuC firmware
On dGfx, the PL1 power limit being enabled and set to a low value results
in a low GPU operating freq. It also negates the freq raise operation which
is done before GuC firmware load. As a result GuC firmware load can time
out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
limit was enabled and set to a low value). Therefore disable the PL1 power
limit when allowed by HW when loading GuC firmware.
v2:
- Take mutex (to disallow writes to power1_max) across GuC reset/fw load
- Add hwm_power_max_restore to error return code path
v3 (Jani N):
- Add/remove explanatory comments
- Function renames
- Type corrections
- Locking annotation
v4:
- Don't hold the lock across GuC reset (Rodrigo)
- New locking scheme (suggested by Rodrigo)
- Eliminate rpm_get in power_max_disable/restore, not needed (Tvrtko)
v5:
- Fix uninitialized pl1en variable compile warning reported by kernel
build robot by creating new err_rps label
Ashutosh Dixit [Thu, 20 Apr 2023 16:40:39 +0000 (09:40 -0700)]
drm/i915/hwmon: Get mutex and rpm ref just once in hwm_power_max_write
In preparation for follow-on patches, refactor hwm_power_max_write to take
hwmon_lock and runtime pm wakeref at start of the function and release them
at the end, therefore acquiring these just once each.
John Harrison [Fri, 21 Apr 2023 22:47:42 +0000 (15:47 -0700)]
drm/i915/guc: Actually return an error if GuC version range check fails
Dan Carpenter pointed out that 'err' was not being set in the case
where the GuC firmware version range check fails. Fix that.
Note that while this is a bug fix for a previous patch (see Fixes tag
below). It is an exceedingly low risk bug. The range check is
asserting that the GuC firmware version is within spec. So it should
not be possible to ever have a firmware file that fails this check. If
larger version numbers are required in the future, that would be a
backwards breaking spec change and thus require a major version bump,
in which case an old i915 driver would not load that new version anyway.
Fixes: 9bbba0667f37 ("drm/i915/guc: Use GuC submission API version number") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com
Fei Yang [Mon, 24 Apr 2023 18:29:02 +0000 (11:29 -0700)]
drm/i915/mtl: workaround coherency issue for Media
This patch implements Wa_22016122933.
In MTL, memory writes initiated by the Media tile update the whole
cache line, even for partial writes. This creates a coherency
problem for cacheable memory if both CPU and GPU are writing data
to different locations within a single cache line.
This patch circumvents the issue by making CPU/GPU shared memory
uncacheable (WC on CPU side, and PAT index 2 for GPU). Additionally,
it ensures that CPU writes are visible to the GPU with an
intel_guc_write_barrier().
While fixing the CTB issue, we noticed some random GSC firmware
loading failure because the share buffers are cacheable (WB) on CPU
side but uncached on GPU side. To fix these issues we need to map
such shared buffers as WC on CPU side. Since such allocations are
not all done through GuC allocator, to avoid too many code changes,
the i915_coherent_map_type() is now hard coded to return WC for MTL.
v2: Simplify the commit message(Matt).
BSpec: 45101
Signed-off-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-3-fei.yang@intel.com
Fei Yang [Mon, 24 Apr 2023 18:29:01 +0000 (11:29 -0700)]
drm/i915/mtl: Add PTE encode function
PTE encode functions are platform dependent. This patch implements
PTE functions for MTL, and ensures the correct PTE encode function
is used by calling pte_encode function pointer instead of the
hardcoded gen8 version of PTE encode.
Fixes: b76c0deef627 ("drm/i915/mtl: Define MOCS and PAT tables for MTL") Signed-off-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-2-fei.yang@intel.com
Fei Yang [Fri, 21 Apr 2023 18:25:35 +0000 (20:25 +0200)]
drm/i915/mtl: fix mocs selftest
Media GT has a different base for MOCS register, need to apply
gsi_offset to the mmio address if not using the intel_uncore_r/w
functions for register access.
On MTL, GT can no longer allocate on LLC - only the CPU can.
This, along with programming new register bits that MTL
requires calls for a MOCS/PAT table update.
Also the PAT index registers are multicasted for primary GT,
and there is an address jump from index 7 to 8. This patch
makes sure that these registers are programmed in the proper
way.
BSpec: 44509, 45101, 44235
Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421182535.292670-2-andi.shyti@linux.intel.com
Wa_22011802037 was being applied to all graphics_ver 11 & 12. This patch
updates the if statement to apply the W/A to right platforms and extends
it to MTL-M:A step.
v1.1: Fix checkpatch warning.
v2: Change the check to reflect the wa at other places(Lucas)
Bspec: 66622 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-4-radhakrishna.sripada@intel.com
drm/i915/gem: Consider multi-gt instead of to_gt()
In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.
Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.
In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.
Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.
drm/i915: Make IRQ reset and postinstall multi-gt aware
In multi-gt systems IRQs need to be reset and enabled per GT.
This might add some redundancy when handling interrupts for
engines that might not exist in every tile, but helps to keep the
code cleaner and more understandable.
Lucas De Marchi [Thu, 13 Apr 2023 20:03:49 +0000 (13:03 -0700)]
drm/i915/gt: Avoid out-of-bounds access when loading HuC
When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.
If firmware is smaller than expected, the following message is now
printed:
Nirmoy Das [Tue, 4 Apr 2023 18:13:42 +0000 (20:13 +0200)]
drm/i915/mtl: Disable stolen memory backed FB for A0
Stolen memory is not usable for MTL A0 stepping beyond
certain access size and we have no control over userspace
access size of /dev/fb which can be backed by stolen memory.
So disable stolen memory backed fb by setting i915->dsm.usable_size
to zero.
v2: remove hsdes reference and fix commit message(Andi)
v3: use revid as we want to target SOC stepping(Radhakrishna)
Cc: Matthew Auld <matthew.auld@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230404181342.23362-1-nirmoy.das@intel.com
Daniel Vetter [Tue, 11 Apr 2023 10:28:09 +0000 (12:28 +0200)]
Merge tag 'mediatek-drm-next-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.4
1. Add support for 10-bit overlays
2. Add MediaTek SoC DRM (vdosys1) support for mt8195
3. Change mmsys compatible for mt8195 mediatek-drm
4. Only trigger DRM HPD events if bridge is attached
5. Change the aux retries times when receiving AUX_DEFER
Daniel Vetter [Tue, 11 Apr 2023 10:11:32 +0000 (12:11 +0200)]
Merge tag 'drm-msm-next-2023-04-10' of https://gitlab.freedesktop.org/drm/msm into drm-next
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a436b ("drm: Use of_property_present() for
testing DT property presence") and 9f251f934012 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
Daniel Vetter [Tue, 11 Apr 2023 10:02:38 +0000 (12:02 +0200)]
Merge tag 'drm-habanalabs-next-2023-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains additional habanalabs driver changes for v6.4:
- uAPI changes:
- Add a definition of a new Gaudi2 server type. This is used by userspace
to know what is the connectivity between the accelerators inside the
server
- New features and improvements:
- speedup h/w queues test in Gaudi2 to reduce device initialization times.
- Firmware related fixes:
- Fixes to the handshake protocol during f/w initialization.
- Sync f/w events interrupt in hard reset to avoid warning message.
- Improvements to extraction of the firmware version.
- Misc bug fixes and code cleanups. Notable fixes are:
- Multiple fixes for interrupt handling in Gaudi2.
- Unmap mapped memory in case TLB invalidation fails.
accel/habanalabs: add missing error flow in hl_sysfs_init()
hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Moti Haimovski [Mon, 20 Mar 2023 20:59:11 +0000 (22:59 +0200)]
accel/habanalabs: speedup h/w queues test in Gaudi2
HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Dani Liberman [Tue, 28 Mar 2023 17:41:35 +0000 (20:41 +0300)]
accel/habanalabs: fix handling of arc farm sei event
There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Ofir Bitton [Mon, 27 Mar 2023 10:40:56 +0000 (13:40 +0300)]
accel/habanalabs: remove Gaudi1 multi MSI code
Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Koby Elbaz [Sun, 26 Mar 2023 15:22:57 +0000 (18:22 +0300)]
accel/habanalabs: don't wait for STS_OK after sending COMMS WFE
Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Tal Cohen [Tue, 21 Mar 2023 08:59:28 +0000 (10:59 +0200)]
accel/habanalabs: sync f/w events interrupt in hard reset
Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Tomer Tayar [Sun, 26 Mar 2023 21:08:45 +0000 (00:08 +0300)]
accel/habanalabs: fix events mask of decoder abnormal interrupts
The decoder IRQ status register may have several set bits upon an
abnormal interrupt. Therefore, when setting the events mask, need to
check all bits and not using if-else.
Ofir Bitton [Wed, 15 Mar 2023 08:36:41 +0000 (10:36 +0200)]
accel/habanalabs: fix HBM MMU interrupt handling
Current mapping between HMMU event and HMMU block is wrong.
In addition the captured address in case of a page fault or
an access error is scrambled, Hence we must call the descramble
function.
Tal Cohen [Wed, 22 Mar 2023 09:20:05 +0000 (11:20 +0200)]
accel/habanalabs: send disable pci when compute ctx is active
Fix an issue in hard reset flow in which the driver didn't send a
disable pci message if there was an active compute context.
In hard reset, disable pci message should be sent no matter if
a compute context exists or not.
The disable pci message is sent in reset device. It informs the FW not
to raise more EQs. The Driver may ignore received EQs, when the device
is in disabled mode.
The duplication happens when hard reset is scheduled during compute
reset and also performs 'escalate_reset_flow'.
Koby Elbaz [Tue, 21 Mar 2023 14:03:07 +0000 (16:03 +0200)]
accel/habanalabs: change COMMS warning messages to error level
COMMS protocol is used for LKD <--> FW communication, and any
communication failure between the two might turn out to be
destructive, hence, it should be well emphasized.
Tal Cohen [Thu, 16 Mar 2023 15:30:46 +0000 (17:30 +0200)]
accel/habanalabs: print event type when device is disabled
When the device is in disabled state, the driver isn't suppose to
receive any events from FW. Printing the event type, as part of the
message that was already printed, shall help to get more info if this
unexpected message is received.
Koby Elbaz [Wed, 8 Mar 2023 15:53:39 +0000 (17:53 +0200)]
accel/habanalabs: unmap mapped memory when TLB inv fails
Once a memory mapping is added to the page tables, it's followed by
a TLB invalidation request which could potentially fail (HW failure).
Removing the mapping is simply a part of this failure handling routine.
TLB invalidation failure prints were updated to be more accurate.
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
drm/i915: disable sampler indirect state in bindless heap
By default the indirect state sampler data (border colors) are stored
in the same heap as the SAMPLER_STATE structure. For userspace drivers
that can be 2 different heaps (dynamic state heap & bindless sampler
state heap). This means that border colors have to copied in 2
different places so that the same SAMPLER_STATE structure find the
right data.
This change is forcing the indirect state sampler data to only be in
the dynamic state pool (more convenient for userspace drivers, they
only have to have one copy of the border colors). This is reproducing
the behavior of the Windows drivers.
drm/msm/dpu: fetch DPU configuration from match data
In email discussion it was noted that there can be different SoC device
having slightly different SoC features, but sharing the same DPU hw
revision. Stop fetching catalog data using core_rev and use platform's
match data instead.
For sm8150+ the DPU_CTL_SPLIT_DISPLAY should be replaced with
DPU_CTL_ACTIVE_CFG support (which supports having a single CTL for both
interfaces in a split). Add comments where this conversion is required.
drm/msm/dpu: move UBWC/memory configuration to separate struct
UBWC and highest bank settings differ slightly between different DPU
units of the same generation, while the dpu_caps and dpu_mdp_cfg are
much more stable. To ease configuration reuse move ubwc_swizzle and
highest_bank_bit data to separate structure.
Konrad Dybcio [Tue, 4 Apr 2023 13:05:43 +0000 (16:05 +0300)]
drm/msm/dpu: Allow variable INTF_BLK size
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x280) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some lengths, split the INTF changes away] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/530816/ Link: https://lore.kernel.org/r/20230404130622.509628-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio [Tue, 4 Apr 2023 13:05:42 +0000 (16:05 +0300)]
drm/msm/dpu: Allow variable SSPP_BLK size
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x1c8) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some of lengths, split the INTF changes away] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530814/ Link: https://lore.kernel.org/r/20230404130622.509628-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio [Sat, 18 Mar 2023 13:42:52 +0000 (14:42 +0100)]
drm/msm/dsi: Switch the QCM2290-specific compatible to index autodetection
Now that the logic can handle multiple sets of registers, move
the QCM2290 to the common logic and mark it deprecated. This allows us
to remove a couple of structs, saving some memory.
Konrad Dybcio [Sat, 18 Mar 2023 13:42:51 +0000 (14:42 +0100)]
drm/msm/dsi: dsi_cfg: Merge SC7180 config into SDM845
The configs are identical, other than the number of *maximum* DSI
hosts allowed. This isn't an issue, unless somebody deliberately
tries to access the inexistent host by adding a dt node for it.
Remove the SC7180 struct and point the hw revision match to the
SDM845's one. On a note, this could have been done back when
7180 support was introduced.
projects / users / jedix / linux-maple.git / log