Thomas Zimmermann [Tue, 1 Feb 2022 11:53:05 +0000 (12:53 +0100)]
drm/fb-helper: Mark screen buffers in system memory with FBINFO_VIRTFB
Mark screen buffers in system memory with FBINFO_VIRTFB. Otherwise, fbdev
deferred I/O marks mmap'ed areas of system memory with VM_IO. (There's an
inverse relationship between the two flags.)
For shadow buffers, also set the FBINFO_READS_FAST hint.
v3:
* change FB_ to FBINFO_ in commit description
v2:
* updated commit description (Daniel)
* added Fixes tag
Since the point of this attribute is for a test, this should be done
in debugfs, not sysfs. Let's revert and a new patch can be added later
doing it in debugfs.
Douglas Anderson [Tue, 25 Jan 2022 21:54:09 +0000 (13:54 -0800)]
drm/panel-edp: Allow querying the detected panel via sysfs
Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.
We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.
Let's add a new sysfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.
Allen Chen [Fri, 14 Jan 2022 09:14:39 +0000 (17:14 +0800)]
drm/bridge: add it6505 driver
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen <allen.chen@ite.com.tw> Tested-by: Hsin-yi Wang <hsinyi@chromium.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
Yongzhi Liu [Fri, 28 Jan 2022 13:41:02 +0000 (05:41 -0800)]
drm/v3d: fix missing unlock
[why]
Unlock is needed on the error handling path to prevent dead lock.
v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.
[how]
Fix this by changing goto target on the error handling path. So
changing the goto to target an error handling path
that includes drm_gem_unlock reservations.
Tomohito Esaki [Fri, 28 Jan 2022 06:08:35 +0000 (15:08 +0900)]
drm: add support modifiers for drivers whose planes only support linear layout
The LINEAR modifier is advertised as default if a driver doesn't specify
modifiers.
v2:
- rebase to the latest master branch (5.16.0+)
+ "drm/plane: Make format_mod_supported truly optional" patch [1]
[1] https://patchwork.freedesktop.org/patch/467940/?series=98255&rev=3
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
v5:
- change default_modifiers array from non-static to static
- remove terminator in default_modifiers array
- use ARRAY_SIZE to get the format_modifier_count
- update sanity check in plane init func to use the
fb_modifiers_not_supported
- modify kernel docs
Tomohito Esaki [Fri, 28 Jan 2022 06:08:34 +0000 (15:08 +0900)]
drm: introduce fb_modifiers_not_supported flag in mode_config
If only linear modifier is advertised, since there are many drivers that
only linear supported, the DRM core should handle this rather than
open-coding in every driver. However, there are legacy drivers such as
radeon that do not support modifiers but infer the actual layout of the
underlying buffer. Therefore, a new flag fb_modifiers_not_supported is
introduced for these legacy drivers, and allow_fb_modifiers is replaced
with this new flag.
v3:
- change the order as follows:
1. add fb_modifiers_not_supported flag
2. add default modifiers
3. remove allow_fb_modifiers flag
- add a conditional disable in amdgpu_dm_plane_init()
v4:
- modify kernel docs
v5:
- modify kernel docs
Signed-off-by: Tomohito Esaki <etom@igel.co.jp> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220128060836.11216-2-etom@igel.co.jp
Yongzhi Liu [Mon, 24 Jan 2022 07:20:35 +0000 (23:20 -0800)]
drm/bridge: Add missing pm_runtime_put_sync
pm_runtime_get_sync() will increase the rumtime PM counter
even when it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error. Besides, a matching decrement is needed
on the error handling path to keep the counter balanced.
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:12 +0000 (15:46 +0100)]
drm/qxl: Move ioctl array next to its only user
Move the array qxl_ioctl to qxl_drv.c and initialize the num_ioctls
field of struct drm_driver at runtime. Replaces the current fragile
ioctl setup and allows for generating the module init/exit code.
Javier Martinez Canillas [Thu, 16 Dec 2021 21:09:36 +0000 (22:09 +0100)]
drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled
The commit feeb07d0ca5a ("drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC
depend on ARM64") made the driver Kconfig symbol to depend on ARM64 since
it only supports that architecture and loading the module on others would
lead to incorrect video modes being used.
But it also prevented the driver to be built on other architectures which
is useful to have compile test coverage when doing subsystem wide changes.
Make the dependency instead to be (ARM64 || COMPILE_TEST), so the driver
is buildable when the CONFIG_COMPILE_TEST option is enabled.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211222133200.6586-1-marex@denx.de
Marek Vasut [Sat, 18 Dec 2021 15:23:09 +0000 (16:23 +0100)]
dt-bindings: display: bridge: lvds-codec: Document TI DS90CF364A decoder
Add compatible string for TI DS90CF364A, which is another LVDS to DPI
decoder similar to DS90CF384A, except it is using smaller package and
only provides 18bit DPI bus.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211218152309.256183-1-marex@denx.de
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:21 +0000 (10:12 +0100)]
fbdev/simplefb: Request memory region in driver
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* store memory region in struct for later cleanup (Javier)
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:20 +0000 (10:12 +0100)]
drm/simpledrm: Request memory region in driver
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* use I/O memory if request_mem_region() fails (Jocelyn)
Javier Martinez Canillas [Tue, 25 Jan 2022 09:12:19 +0000 (10:12 +0100)]
drivers/firmware: Don't mark as busy the simple-framebuffer IO resource
The sysfb_create_simplefb() function requests a IO memory resource for the
simple-framebuffer platform device, but it also marks it as busy which can
lead to drivers requesting the same memory resource to fail.
Let's drop the IORESOURCE_BUSY flag and let drivers to request it as busy
instead.
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:18 +0000 (10:12 +0100)]
fbdev: Hot-unplug firmware fb devices on forced removal
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
Linus Walleij [Mon, 3 Jan 2022 09:35:01 +0000 (10:35 +0100)]
drm/panel: Extend ACX424AKP bindings to ACX424AKM
The panel ACX424AKP seems to only be used in prototypes, whereas
real products use the 10 pixels shorter ACX424AKM. Extend the
ACX424AKP bindings to also cover the ACX424AKM. The ACX424AKM
was used in a few different mobile phones from Sony Mobile.
Yunlong Jia [Thu, 20 Jan 2022 06:45:10 +0000 (06:45 +0000)]
gpu: drm: panel-edp: Add panels planned for sc7180-trogdor-pazquel
We have added corresponding information:
[BOE]NV116WHM-N45 use delay_200_500_e50
[KDB]116N29-30NK-C007 use delay_200_500_e80_d50
[STA]2081116HHD028001-51D use delay_100_500_e200
Add 3 panels & 2 delay.
Christian König [Thu, 15 Jul 2021 12:17:19 +0000 (14:17 +0200)]
drm/ttm: add a weak BO reference to the resource v3
Keep track for which BO a resource was allocated.
This is necessary to move the LRU handling into the resources.
A bit problematic is i915 since it tries to use the resource
interface without a BO which is illegal from the conceptional
point of view.
v2: Document that this is a weak reference and add a workaround for i915
v3: further document that this is protected by ttm_device::lru_lock and
clarify the i915 workaround
Zhou Qingyang [Mon, 24 Jan 2022 16:58:55 +0000 (00:58 +0800)]
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().
Fix this bug by using kmemdup() instead of kmalloc()+memcpy().
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Maxime Ripard [Thu, 20 Jan 2022 15:16:18 +0000 (16:16 +0100)]
drm/vc4: hdmi: Define colorspace matrices
The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.
However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.
Maxime Ripard [Thu, 20 Jan 2022 15:16:16 +0000 (16:16 +0100)]
drm/vc4: hdmi: Move XBAR setup to csc_setup
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.
Maxime Ripard [Thu, 20 Jan 2022 15:16:15 +0000 (16:16 +0100)]
drm/vc4: hdmi: Use full range helper in csc functions
The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.
However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.
Maxime Ripard [Thu, 20 Jan 2022 15:16:14 +0000 (16:16 +0100)]
drm/vc4: hdmi: Add full range RGB helper
We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.
Maxime Ripard [Thu, 20 Jan 2022 15:16:12 +0000 (16:16 +0100)]
drm/edid: Split deep color modes between RGB and YUV444
The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Maxime Ripard [Thu, 20 Jan 2022 15:16:11 +0000 (16:16 +0100)]
drm/edid: Don't clear formats if using deep color
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
Maxime Ripard [Thu, 20 Jan 2022 15:16:10 +0000 (16:16 +0100)]
drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.
To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.
Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.
Daniel Vetter [Mon, 24 Jan 2022 22:16:33 +0000 (23:16 +0100)]
drm/docs: Document where the C8 color lut is stored
Also add notes that for atomic drivers it's really somewhere else and
no longer in struct drm_crtc.
Maybe we should put a bigger warning here that this is confusing,
since the pixel format is a plane property, but the GAMMA_LUT property
is on the crtc. But I think we can fix this if/when someone finds a
need for a per-plane CLUT, since I'm not sure such hw even exists. I'm
also not sure whether even hardware with a CLUT and a full color
correction pipeline with degamm/cgm/gamma exists.
Motivated by comments from Geert that we have a gap here.
v2: More names for color luts (Laurent).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124221633.952374-1-daniel.vetter@ffwll.ch
Jani Nikula [Tue, 28 Dec 2021 10:10:51 +0000 (12:10 +0200)]
drm/edid: improve non-desktop quirk logging
Improve non-desktop quirk logging if the EDID indicates non-desktop. If
both are set, note about redundant quirk. If there's no quirk but the
EDID indicates non-desktop, don't log non-desktop is set to 0.
Philipp Zabel [Sun, 23 Jan 2022 10:16:53 +0000 (11:16 +0100)]
drm/edid: remove non_desktop quirk for HPN-3515 and LEN-B800.
Now that there is support for the Microsoft VSDB for HMDs, remove the
non-desktop quirk for two devices that are verified to contain it in
their EDID: HPN-3515 and LEN-B800.
Presumably most of the other Windows Mixed Reality headsets contain it
as well, but there are ACR-7FCE and SEC-5194 devices without it.
Philipp Zabel [Sun, 23 Jan 2022 10:16:52 +0000 (11:16 +0100)]
drm/edid: support Microsoft extension for HMDs and specialized monitors
Add minimal support for parsing VSDBs documented in Microsoft's "EDID
extension for head-mounted and specialized monitors" [1]. The version
field and the desktop usage flag can be used to set the non_desktop
connector property.
Thomas Zimmermann [Thu, 20 Jan 2022 11:36:47 +0000 (12:36 +0100)]
drm: Update docs after moving DisplayPort helpers around
DRM's DisplayPort helpers moved into the subdirectory dp/. Change
the documentation accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: adb9d5a2cc77 ("drm/dp: Move DisplayPort helpers into separate helper module") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Jani Nikula <jani.nikula@linux.intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220120113647.22484-1-tzimmermann@suse.de
The stack_depot member was added without kernel-doc, leading to below
warning. Fix it.
./include/drm/drm_modeset_lock.h:74: warning: Function parameter or
member 'stack_depot' not described in 'drm_modeset_acquire_ctx'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20220120094856.3004147-1-jani.nikula@intel.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:31 +0000 (09:28 +0100)]
drm/malidp: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:30 +0000 (09:28 +0100)]
drm/arm/hdlcd: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:29 +0000 (09:28 +0100)]
drm/komeda: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:28 +0000 (09:28 +0100)]
drm/imx/dcss: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:27 +0000 (09:28 +0100)]
drm: Provide platform module-init macro
Provide a helper macro to register platform DRM drivers. The new
macro behaves like module_platform_driver() with an additional
test if DRM modesetting has been enabled.
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:22 +0000 (09:28 +0100)]
drm: Provide PCI module-init macros
Provide helper macros to register PCI-based DRM drivers. The new
macros behave like module_pci_driver() with an additional test if
DRM modesetting has been enabled.
José Expósito [Fri, 7 Jan 2022 18:02:30 +0000 (19:02 +0100)]
drm/doc: Fix TTM acronym
The TTM acronym is defined for the first time in the documentation as
"Translation Table Maps". Afterwards, "Translation Table Manager" is
used as definition.
Jocelyn Falempe [Wed, 19 Jan 2022 10:29:05 +0000 (11:29 +0100)]
mgag200 fix memmapsl configuration in GCTL6 register
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
projects / users / jedix / linux-maple.git / log