Jianbo Liu [Thu, 19 Dec 2024 12:37:30 +0000 (14:37 +0200)]
net/mlx5e: Update TX ESN context for IPSec hardware offload
ESN context must be synced between software and hardware for both RX
and TX. As the call to xfrm_dev_state_advance_esn() is added for TX,
this patch add the missing logic for TX. So the update is also checked
on every packet sent, to see if need to trigger ESN update worker.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Jianbo Liu [Thu, 19 Dec 2024 12:37:29 +0000 (14:37 +0200)]
xfrm: Support ESN context update to hardware for TX
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert [Mon, 9 Dec 2024 09:09:40 +0000 (10:09 +0100)]
Merge branch 'Add IP-TFS mode to xfrm'
Christian Hopps says:
====================
* Summary of Changes:
This patchset adds a new xfrm mode implementing on-demand IP-TFS. IP-TFS
(AggFrag encapsulation) has been standardized in RFC9347.
Link: https://www.rfc-editor.org/rfc/rfc9347.txt
This feature supports demand driven (i.e., non-constant send rate)
IP-TFS to take advantage of the AGGFRAG ESP payload encapsulation. This
payload type supports aggregation and fragmentation of the inner IP
packet stream which in turn yields higher small-packet bandwidth as well
as reducing MTU/PMTU issues. Congestion control is unimplementated as
the send rate is demand driven rather than constant.
In order to allow loading this fucntionality as a module a set of
callbacks xfrm_mode_cbs has been added to xfrm as well.
Patchset Structure:
-------------------
The first 5 commits are changes to the net and xfrm infrastructure to
support the callbacks as well as more generic IP-TFS additions that
may be used outside the actual IP-TFS implementation.
- xfrm: config: add CONFIG_XFRM_IPTFS
- include: uapi: protocol number and packet structs for AGGFRAG in ESP
- xfrm: netlink: add config (netlink) options
- xfrm: add mode_cbs module functionality
- xfrm: add generic iptfs defines and functionality
The last 10 commits constitute the IP-TFS implementation constructed in
layers to make review easier. The first 9 commits all apply to a single
file `net/xfrm/xfrm_iptfs.c`, the last commit adds a new tracepoint
header file along with the use of these new tracepoint calls.
- xfrm: iptfs: add new iptfs xfrm mode impl
- xfrm: iptfs: add user packet (tunnel ingress) handling
- xfrm: iptfs: share page fragments of inner packets
- xfrm: iptfs: add fragmenting of larger than MTU user packets
- xfrm: iptfs: add basic receive packet (tunnel egress) handling
- xfrm: iptfs: handle received fragmented inner packets
- xfrm: iptfs: add reusing received skb for the tunnel egress packet
- xfrm: iptfs: add skb-fragment sharing code
- xfrm: iptfs: handle reordering of received packets
- xfrm: iptfs: add tracepoint functionality
====================
Christian Hopps [Thu, 14 Nov 2024 07:07:11 +0000 (02:07 -0500)]
xfrm: iptfs: handle reordering of received packets
Handle the receipt of the outer tunnel packets out-of-order. Pointers to
the out-of-order packets are saved in a window (array) awaiting needed
prior packets. When the required prior packets are received the now
in-order packets are then passed on to the regular packet receive code.
A timer is used to consider missing earlier packet as lost so the
algorithm will advance.
Christian Hopps [Thu, 14 Nov 2024 07:07:05 +0000 (02:07 -0500)]
xfrm: iptfs: share page fragments of inner packets
When possible rather than appending secondary (aggregated) inner packets
to the fragment list, share their page fragments with the outer IPTFS
packet. This allows for more efficient packet transmission.
Christian Hopps [Thu, 14 Nov 2024 07:07:03 +0000 (02:07 -0500)]
xfrm: iptfs: add new iptfs xfrm mode impl
Add a new xfrm mode implementing AggFrag/IP-TFS from RFC9347.
This utilizes the new xfrm_mode_cbs to implement demand-driven IP-TFS
functionality. This functionality can be used to increase bandwidth
utilization through small packet aggregation, as well as help solve PMTU
issues through it's efficient use of fragmentation.
====================
net: add negotiation of in-band capabilities
This is a repost without RFC for this series, shrunk down to 13 patches
by removing the non-Marvell PCS.
Phylink's handling of in-band has been deficient for a long time, and
people keep hitting problems with it. Notably, situations with the way-
to-late standardized 2500Base-X and whether that should or should not
have in-band enabled. We have also been carrying a hack in the form of
phylink_phy_no_inband() for a PHY that has been used on a SFP module,
but has no in-band capabilities, not even for SGMII.
When phylink is trying to operate in in-band mode, this series will look
at the capabilities of the MAC-side PCS and PHY, and work out whether
in-band can or should be used, programming the PHY as appropriate. This
includes in-band bypass mode at the PHY.
We don't... yet... support bypass on the MAC side PCS, because that
requires yet more complexity.
Patch 1 passes struct phylink and struct phylink_pcs into
phylink_pcs_neg_mode() so we can look at more state in this function in
a future patch.
Patch 2 splits "cur_link_an_mode" (the MLO_AN_* mode) into two separate
purposes - a requested and an active mode. The active mode is the one
we will be using for the MAC, which becomes dependent on the result of
in-band negotiation.
Patch 3 adds debug to phylink_major_config() so we can see what is going
on with the requested and active AN modes.
Patch 4 adds to phylib a method to get the in-band capabilities of the
PHY from phylib. Patches 5 and 6 add implementations for BCM84881 and
some Marvell PHYs found on SFPs.
Patch 7 adds to phylib a method to configure the PHY in-band signalling,
and patch 8 implements it for those Marvell PHYs that support the method
in patch 4.
Patch 9 does the same as patch 4 but for the MAC-side PCS, with patches
10 and 11 adding support to Marvell NETA and PP2.
Patch 12 adds the code to phylink_pcs_neg_mode() which looks at the
capabilities, and works out whether to use in-band or out-band mode for
driving the link between the MAC PCS and PHY.
Patch 13 removes the phylink_phy_no_inband() hack now that we are
publishing the in-band capabilities from the BCM84881 PHY driver.
Three more PCS, omitted from this series due to the limit of 15 patches,
will be sent once this has been merged.
====================
Russell King (Oracle) [Tue, 3 Dec 2024 15:31:48 +0000 (15:31 +0000)]
net: phylink: remove phylink_phy_no_inband()
Remove phylink_phy_no_inband() now that we are handling the lack of
inband negotiation by querying the capabilities of the PHY and PCS,
and the BCM84881 PHY driver provides us the information necessary to
make the decision.
Russell King (Oracle) [Tue, 3 Dec 2024 15:31:43 +0000 (15:31 +0000)]
net: phylink: add negotiation of in-band capabilities
Support for in-band signalling with Serdes links is uncertain. Some
PHYs do not support in-band for e.g. SGMII. Some PCS do not support
in-band for 2500Base-X. Some PCS require in-band for Base-X protocols.
Simply using what is in DT is insufficient when we have hot-pluggable
PHYs e.g. in the form of SFP modules, which may not provide the
in-band signalling.
In order to address this, we have introduced phy_inband_caps() and
pcs_inband_caps() functions to allow phylink to retrieve the
capabilities from each end of the PCS/PHY link. This commit adds code
to resolve whether in-band will be used in the various scenarios that
we have: In-band not being used, PHY present using SGMII or Base-X,
PHY not present. We also deal with no capabilties provided.
Russell King (Oracle) [Tue, 3 Dec 2024 15:31:28 +0000 (15:31 +0000)]
net: phylink: add pcs_inband_caps() method
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.
When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.
BCM84881 has no support for inband signalling, so this is a trivial
implementation that returns no support for inband.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/E1tIUrj-006IU6-ON@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 3 Dec 2024 15:31:02 +0000 (15:31 +0000)]
net: phy: add phy_inband_caps()
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.
Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:
LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.
LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.
LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.
This reports the PHY capabilities for the particular interface mode,
not the current configuration.
Russell King (Oracle) [Tue, 3 Dec 2024 15:30:52 +0000 (15:30 +0000)]
net: phylink: split cur_link_an_mode into requested and active
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.
In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.
To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.
Russell King (Oracle) [Tue, 3 Dec 2024 15:30:47 +0000 (15:30 +0000)]
net: phylink: pass phylink and pcs into phylink_pcs_neg_mode()
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.
Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.
This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.
====================
netcons: Add udp send fail statistics to netconsole
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
====================
Maksym Kutsevol [Mon, 2 Dec 2024 19:55:08 +0000 (11:55 -0800)]
netcons: Add udp send fail statistics to netconsole
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
Maksym Kutsevol [Mon, 2 Dec 2024 19:55:07 +0000 (11:55 -0800)]
netpoll: Make netpoll_send_udp return status instead of void
netpoll_send_udp can return if send was successful.
It will allow client code to be aware of the send status.
Possible return values are the result of __netpoll_send_skb (cast to int)
and -ENOMEM. This doesn't cover the case when TX was not successful
instantaneously and was scheduled for later, __netpoll__send_skb returns
success in that case.
Breno Leitao [Tue, 3 Dec 2024 00:22:05 +0000 (16:22 -0800)]
netpoll: Use rtnl_dereference() for npinfo pointer access
In the __netpoll_setup() function, when accessing the device's npinfo
pointer, replace rcu_access_pointer() with rtnl_dereference(). This
change is more appropriate, as suggested by Herbert Xu[1].
The function is called with the RTNL mutex held, and the pointer is
being dereferenced later, so, dereference earlier and just reuse the
pointer for the if/else.
The replacement ensures correct pointer access while maintaining
the existing locking and RCU semantics of the netpoll subsystem.
Heiner Kallweit [Mon, 2 Dec 2024 20:20:02 +0000 (21:20 +0100)]
r8169: remove support for chip version 11
This is a follow-up to 982300c115d2 ("r8169: remove detection of chip
version 11 (early RTL8168b)"). Nobody complained yet, so remove
support for this chip version.
Uwe Kleine-König [Sat, 30 Nov 2024 14:53:49 +0000 (15:53 +0100)]
ptp: Switch back to struct platform_driver::remove()
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/ptp to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these drivers, make the alignment of the touched
initializers consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 28 Nov 2024 18:15:20 +0000 (10:15 -0800)]
Merge tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - regressions:
- rtnetlink: fix rtnl_dump_ifinfo() error path
- bluetooth: remove the redundant sco_conn_put
Previous releases - regressions:
- netlink: fix false positive warning in extack during dumps
- sched: sch_fq: don't follow the fast path if Tx is behind now
- ipv6: delete temporary address if mngtmpaddr is removed or
unmanaged
- tcp: fix use-after-free of nreq in reqsk_timer_handler().
- bluetooth: fix slab-use-after-free Read in set_powered_sync
- l2tp: fix warning in l2tp_exit_net found
- eth:
- bnxt_en: fix receive ring space parameters when XDP is active
- lan78xx: fix double free issue with interrupt buffer allocation
- tg3: set coherent DMA mask bits to 31 for BCM57766 chipsets
Previous releases - always broken:
- ipmr: fix tables suspicious RCU usage
- iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()
- eth:
- octeontx2-af: fix low network performance
- stmmac: dwmac-socfpga: set RX watchdog interrupt as broken
- rtase: correct the speed for RTL907XD-V1
Misc:
- some documentation fixup"
* tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ipmr: fix build with clang and DEBUG_NET disabled.
Documentation: tls_offload: fix typos and grammar
Fix spelling mistake
ipmr: fix tables suspicious RCU usage
ip6mr: fix tables suspicious RCU usage
ipmr: add debug check for mr table cleanup
selftests: rds: move test.py to TEST_FILES
net_sched: sch_fq: don't follow the fast path if Tx is behind now
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI
net: Comment copy_from_sockptr() explaining its behaviour
rxrpc: Improve setsockopt() handling of malformed user input
llc: Improve setsockopt() handling of malformed user input
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
bnxt_en: Unregister PTP during PCI shutdown and suspend
bnxt_en: Refactor bnxt_ptp_init()
bnxt_en: Fix receive ring space parameters when XDP is active
bnxt_en: Fix queue start to update vnic RSS table
...
Linus Torvalds [Thu, 28 Nov 2024 18:06:00 +0000 (10:06 -0800)]
Merge tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the
generic ACPI bindings for SPI devices"
* tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix acpi deferred irq probe
spi: atmel-quadspi: Fix register name in verbose logging function
spi-imx: prevent overflow when estimating transfer time
spi: rockchip-sfc: Embedded DMA only support 4B aligned address
Linus Torvalds [Thu, 28 Nov 2024 17:40:53 +0000 (09:40 -0800)]
Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
Linus Torvalds [Thu, 28 Nov 2024 17:22:00 +0000 (09:22 -0800)]
Merge tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
Linus Torvalds [Thu, 28 Nov 2024 17:18:11 +0000 (09:18 -0800)]
Merge tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
Paolo Abeni [Thu, 28 Nov 2024 16:18:04 +0000 (17:18 +0100)]
ipmr: fix build with clang and DEBUG_NET disabled.
Sasha reported a build issue in ipmr::
net/ipv4/ipmr.c:320:13: error: function 'ipmr_can_free_table' is not \
needed and will not be emitted \
[-Werror,-Wunneeded-internal-declaration]
320 | static bool ipmr_can_free_table(struct net *net)
Apparently clang is too smart with BUILD_BUG_ON_INVALID(), let's
fallback to a plain WARN_ON_ONCE().
Reported-by: Sasha Levin <sashal@kernel.org> Closes: https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-25635-g6813e2326f1e/testrun/26111580/suite/build/test/clang-nightly-lkftconfig/details/ Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/ee75faa926b2446b8302ee5fc30e129d2df73b90.1732810228.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 28 Nov 2024 09:23:26 +0000 (10:23 +0100)]
Merge branch 'net-fix-mcast-rcu-splats'
Paolo Abeni says:
====================
net: fix mcast RCU splats
This series addresses the RCU splat triggered by the forwarding
mroute tests.
The first patch does not address any specific issue, but makes the
following ones more clear. Patch 2 and 3 address the issue for ipv6 and
ipv4 respectively.
====================
Paolo Abeni [Sun, 24 Nov 2024 15:40:58 +0000 (16:40 +0100)]
ipmr: fix tables suspicious RCU usage
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d90b ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT") Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Sun, 24 Nov 2024 15:40:57 +0000 (16:40 +0100)]
ip6mr: fix tables suspicious RCU usage
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e674 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.") Fixes: d7c31cbde4bc ("net: ip6mr: add RTM_GETROUTE netlink op") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Sun, 24 Nov 2024 15:40:56 +0000 (16:40 +0100)]
ipmr: add debug check for mr table cleanup
The multicast route tables lifecycle, for both ipv4 and ipv6, is
protected by RCU using the RTNL lock for write access. In many
places a table pointer escapes the RCU (or RTNL) protected critical
section, but such scenarios are actually safe because tables are
deleted only at namespace cleanup time or just after allocation, in
case of default rule creation failure.
Tables freed at namespace cleanup time are assured to be alive for the
whole netns lifetime; tables freed just after creation time are never
exposed to other possible users.
Ensure that the free conditions are respected in ip{,6}mr_free_table, to
document the locking schema and to prevent future possible introduction
of 'table del' operation from breaking it.
Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Sun, 24 Nov 2024 07:32:43 +0000 (07:32 +0000)]
selftests: rds: move test.py to TEST_FILES
The test.py should not be run separately. It should be run via run.sh,
which will do some sanity checks first. Move the test.py from TEST_PROGS
to TEST_FILES.
Reported-by: Maximilian Heyne <mheyne@amazon.de> Closes: https://lore.kernel.org/netdev/20241122150129.GB18887@dev-dsk-mheyne-1b-55676e6a.eu-west-1.amazon.com Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20241124073243.847932-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replacing the qdisc with pfifo makes retransmissions go away.
It appears that a flow may have a delayed packet with a very near
Tx time. Later, we may get busy processing Rx and the target Tx time
will pass, but we won't service Tx since the CPU is busy with Rx.
If Rx sees an ACK and we try to push more data for the delayed flow
we may fastpath the skb, not realizing that there are already "ready
to send" packets for this flow sitting in the qdisc.
Don't trust the fastpath if we are "behind" according to the projected
Tx time for next flow waiting in the Qdisc. Because we consider anything
within the offload window to be okay for fastpath we must consider
the entire offload window as "now".
Kuniyuki Iwashima [Sat, 23 Nov 2024 17:42:36 +0000 (09:42 -0800)]
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put().
Fixes: e8c526f2bdf1 ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().") Reported-by: Liu Jian <liujian56@huawei.com> Closes: https://lore.kernel.org/netdev/1284490f-9525-42ee-b7b8-ccadf6606f6d@huawei.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20241123174236.62438-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.
However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.
This can be demonstrated with a 1000base-T FD interface by:
# ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated
# ethtool --set-eee eno0 tx-lpi off
# ethtool --set-eee eno0 tx-lpi on
This results in being true, despite EEE not having been negotiated and:
# ethtool --show-eee eno0
EEE status: enabled - inactive
Tx LPI: 250 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.
Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 28 Nov 2024 08:23:02 +0000 (09:23 +0100)]
Merge tag 'for-net-2024-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: remove the redundant sco_conn_put
- MGMT: Fix slab-use-after-free Read in set_powered_sync
- MGMT: Fix possible deadlocks
* tag 'for-net-2024-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
====================
====================
net: Fix some callers of copy_from_sockptr()
Some callers misinterpret copy_from_sockptr()'s return value. The function
follows copy_from_user(), i.e. returns 0 for success, or the number of
bytes not copied on error. Simply returning the result in a non-zero case
isn't usually what was intended.
Compile tested with CONFIG_LLC, CONFIG_AF_RXRPC, CONFIG_BT enabled.
Last patch probably belongs more to net-next, if any. Here as an RFC.
Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Michal Luczaj [Tue, 19 Nov 2024 13:31:43 +0000 (14:31 +0100)]
net: Comment copy_from_sockptr() explaining its behaviour
copy_from_sockptr() has a history of misuse. Add a comment explaining that
the function follows API of copy_from_user(), i.e. returns 0 for success,
or number of bytes not copied on error.
Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj [Tue, 19 Nov 2024 13:31:42 +0000 (14:31 +0100)]
rxrpc: Improve setsockopt() handling of malformed user input
copy_from_sockptr() does not return negative value on error; instead, it
reports the number of bytes that failed to copy. Since it's deprecated,
switch to copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(unsigned int)` check as
copy_safe_from_sockptr() by itself would also accept
optlen > sizeof(unsigned int). Which would allow a more lenient handling
of inputs.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj [Tue, 19 Nov 2024 13:31:41 +0000 (14:31 +0100)]
llc: Improve setsockopt() handling of malformed user input
copy_from_sockptr() is used incorrectly: return value is the number of
bytes that could not be copied. Since it's deprecated, switch to
copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(int)` check as copy_safe_from_sockptr()
by itself would also accept optlen > sizeof(int). Which would allow a more
lenient handling of inputs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: David Wei <dw@davidwei.uk> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Wed, 27 Nov 2024 22:50:31 +0000 (14:50 -0800)]
Merge tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
Linus Torvalds [Wed, 27 Nov 2024 22:40:33 +0000 (14:40 -0800)]
Merge tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull morepower management updates from Rafael Wysocki:
"These update the OPP (Operating Performance Points) DT bindings for
ti-cpu (Dhruva Gole) and remove unused declarations from the OPP
header file (Zhang Zekun)"
* tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw
OPP: Remove unused declarations in header file
Linus Torvalds [Wed, 27 Nov 2024 22:36:00 +0000 (14:36 -0800)]
Merge tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix a Power Allocator thermal governor issue reported recently,
update the Intel int3400 thermal driver and simplify DT data parsing
in the thermal control subsystem:
- Add a NULL pointer check that was missed by recent modifications of
the Power Allocator thermal governor (Rafael Wysocki)
- Remove the data_vault attribute_group from int3400 because it is
only used for exposing one binary file that can be exposed directly
(Thomas Weißschuh)
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems
(Srinivas Pandruvada)
- Use the cleanup.h mechanics to simplify DT data parsing in the
thermal core and some drivers (Krzysztof Kozlowski)"
* tag 'thermal-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: sun8i: Use scoped device node handling to simplify error paths
thermal: tegra: Simplify with scoped for each OF child loop
thermal: qcom-spmi-adc-tm5: Simplify with scoped for each OF child loop
thermal: of: Use scoped device node handling to simplify of_thermal_zone_find()
thermal: of: Use scoped memory and OF handling to simplify thermal_of_trips_init()
thermal: of: Simplify thermal_of_should_bind with scoped for each OF child
thermal: gov_power_allocator: Add missing NULL pointer check
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
Linus Torvalds [Wed, 27 Nov 2024 22:24:34 +0000 (14:24 -0800)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull more iommufd updates from Jason Gunthorpe:
"Change the driver callback op domain_alloc_user() into two ops:
domain_alloc_paging_flags() and domain_alloc_nesting() that better
describe what the ops are expected to do.
There will be per-driver cleanup based on this going into the next
cycle via the driver trees"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Rename ops->domain_alloc_user() to domain_alloc_paging_flags()
iommu: Add ops->domain_alloc_nested()
Linus Torvalds [Wed, 27 Nov 2024 21:33:43 +0000 (13:33 -0800)]
Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
Linus Torvalds [Wed, 27 Nov 2024 21:23:13 +0000 (13:23 -0800)]
Merge tag 'gpio-fixes-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from the gpio-exar fix which addresses an older issue, they all
fix regressions from this release cycle:
- fix missing GPIO chip labels in gpio-zevio and gpio-altera
- for the latter: also set GPIO base to -1 to use dynamic range
allocation
- fix value setting with external pull-up/down resistor in gpio-exar
- use the recommended IDA interfaces in gpio-mpsse"
* tag 'gpio-fixes-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpsse: Remove usage of the deprecated ida_simple_xx() API
gpio: exar: set value when external pull-up or pull-down is present
gpio: altera: Add missed base and label initialisations
gpio: zevio: Add missed label initialisation
Linus Torvalds [Wed, 27 Nov 2024 21:11:58 +0000 (13:11 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_vdpa: remove redundant check on desc
virtio_fs: store actual queue index in mq_map
virtio_fs: add informative log for new tag discovery
virtio: Make vring_new_virtqueue support packed vring
virtio_pmem: Add freeze/restore callbacks
vdpa/mlx5: Fix suboptimal range on iotlb iteration
Linus Torvalds [Wed, 27 Nov 2024 20:57:03 +0000 (12:57 -0800)]
Merge tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Constify an unmodified structure used in linking vfio and kvm
(Christophe JAILLET)
- Add ID for an additional hardware SKU supported by the nvgrace-gpu
vfio-pci variant driver (Ankit Agrawal)
- Fix incorrect signed cast in QAT vfio-pci variant driver, negating
test in check_add_overflow(), though still caught by later tests
(Giovanni Cabiddu)
- Additional debugfs attributes exposed in hisi_acc vfio-pci variant
driver for migration debugging (Longfang Liu)
- Migration support is added to the virtio vfio-pci variant driver,
becoming the primary feature of the driver while retaining emulation
of virtio legacy support as a secondary option (Yishai Hadas)
- Fixes to a few unwind flows in the mlx5 vfio-pci driver discovered
through reviews of the virtio variant driver (Yishai Hadas)
- Fix an unlikely issue where a PCI device exposed to userspace with an
unknown capability at the base of the extended capability chain can
overflow an array index (Avihai Horon)
* tag 'vfio-v6.13-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Properly hide first-in-list PCIe extended capability
vfio/mlx5: Fix unwind flows in mlx5vf_pci_save/resume_device_data()
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
vfio/virtio: Enable live migration once VIRTIO_PCI was configured
vfio/virtio: Add PRE_COPY support for live migration
vfio/virtio: Add support for the basic live migration functionality
virtio-pci: Introduce APIs to execute device parts admin commands
virtio: Manage device and driver capabilities via the admin commands
virtio: Extend the admin command to include the result size
virtio_pci: Introduce device parts access commands
Documentation: add debugfs description for hisi migration
hisi_acc_vfio_pci: register debugfs for hisilicon migration driver
hisi_acc_vfio_pci: create subfunction for data reading
hisi_acc_vfio_pci: extract public functions for container_of
vfio/qat: fix overflow check in qat_vf_resume_write()
vfio/nvgrace-gpu: Add a new GH200 SKU to the devid table
kvm/vfio: Constify struct kvm_device_ops
Linus Torvalds [Wed, 27 Nov 2024 19:19:09 +0000 (11:19 -0800)]
Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
Linus Torvalds [Wed, 27 Nov 2024 19:15:27 +0000 (11:15 -0800)]
Merge tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix build failure with GCC 15 due to default -std=gnu23
- Add PREEMPT_RT/PREEMPT_LAZY support
- Add I2S in DTS for Loongson-2K1000/Loongson-2K2000
- Some bug fixes and other small changes
* tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add I2S support to Loongson-2K2000
LoongArch: dts: Add I2S support to Loongson-2K1000
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch: Allow to enable PREEMPT_RT
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
LoongArch: Reduce min_delta for the arch clockevent device
LoongArch: BPF: Sign-extend return values
LoongArch: Fix build failure with GCC 15 (-std=gnu23)
LoongArch: Explicitly specify code model in Makefile
Linus Torvalds [Wed, 27 Nov 2024 19:13:25 +0000 (11:13 -0800)]
Merge tag 'memblock-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- replace hardcoded strings with str_on_off() in report_meminit()
- initialize reserved pages to MIGRATE_MOVABLE when deferred struct
page initialization is enabled so that if the reserved pages are
freed they are put on movable free lists like it is done now when
deferred struct page initialization is disabled
* tag 'memblock-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: uniformly initialize all reserved pages to MIGRATE_MOVABLE
mm: Use str_on_off() helper function in report_meminit()
Linus Torvalds [Wed, 27 Nov 2024 18:20:50 +0000 (10:20 -0800)]
Merge tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Luis Chamberlain:
- The whole caching of module code into huge pages by Mike Rapoport is
going in through Andrew Morton's tree due to some other code
dependencies. That's really the biggest highlight for Linux kernel
modules in this release. With it we share huge pages for modules,
starting off with x86. Expect to see that soon through Andrew!
- Helge Deller addressed some lingering low hanging fruit alignment
enhancements by. It is worth pointing out that from his old patch
series I dropped his vmlinux.lds.h change at Masahiro's request as he
would prefer this to be specified in asm code [0].
- Matthew Maurer and Sami Tolvanen have been tag teaming to help get us
closer to a modversions for Rust. In this cycle we take in quite a
lot of the refactoring for ELF validation. I expect modversions for
Rust will be merged by v6.14 as that code is mostly ready now.
- Adds a new modules selftests: kallsyms which helps us tests
find_symbol() and the limits of kallsyms on Linux today.
- We have a realtime mailing list to kernel-ci testing for modules now
which relies and combines patchwork, kpd and kdevops:
If you want to help avoid Linux kernel modules regressions, now its
simple, just add a new Linux modules sefltests under
tools/testing/selftests/module/ That is it. All new selftests will be
used and leveraged automatically by the CI.
* tag 'modules-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
tests/module/gen_test_kallsyms.sh: use 0 value for variables
scripts: Remove export_report.pl
selftests: kallsyms: add MODULE_DESCRIPTION
selftests: add new kallsyms selftests
module: Reformat struct for code style
module: Additional validation in elf_validity_cache_strtab
module: Factor out elf_validity_cache_strtab
module: Group section index calculations together
module: Factor out elf_validity_cache_index_str
module: Factor out elf_validity_cache_index_sym
module: Factor out elf_validity_cache_index_mod
module: Factor out elf_validity_cache_index_info
module: Factor out elf_validity_cache_secstrings
module: Factor out elf_validity_cache_sechdrs
module: Factor out elf_validity_ehdr
module: Take const arg in validate_section_offset
modules: Add missing entry for __ex_table
modules: Ensure 64-bit alignment on __ksymtab_* sections
Rafael J. Wysocki [Wed, 27 Nov 2024 17:59:16 +0000 (18:59 +0100)]
Merge branch 'thermal-intel'
Merge updates of Intel int3400 thermal driver for 6.13-rc1:
- Remove the data_vault attribute_group from int3400 because it is only
used for exposing one binary file that can be exposed directly (Thomas
Weißschuh).
- Prevent the current_uuid sysfs attribute in int3400 from mistakenly
treating valid UUID values as invalid on some older systems (Srinivas
Pandruvada).
* thermal-intel:
thermal: int3400: Remove unneeded data_vault attribute_group
thermal: int3400: Fix reading of current_uuid for active policy
Linus Torvalds [Wed, 27 Nov 2024 16:11:46 +0000 (08:11 -0800)]
Merge tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a few iomap bugs
- Fix a wrong argument in backing file callback
- Fix security mount option retrieval in statmount()
- Cleanup how statmount() handles unescaped options
- Add a missing inode_owner_or_capable() check for setting write hints
- Clear the return value in read_kcore_iter() after a successful
iov_iter_zero()
- Fix a mount_setattr() selftest
- Fix function signature in mount api documentation
- Remove duplicate include header in the fscache code
* tag 'vfs-6.13-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/backing_file: fix wrong argument in callback
fs_parser: update mount_api doc to match function signature
fs: require inode_owner_or_capable for F_SET_RW_HINT
fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero
statmount: fix security option retrieval
statmount: clean up unescaped option handling
fscache: Remove duplicate included header
iomap: elide flush from partial eof zero range
iomap: lift zeroed mapping handling into iomap_zero_range()
iomap: reset per-iter state on non-error iter advances
iomap: warn on zero range of a post-eof folio
selftests/mount_setattr: Fix failures on 64K PAGE_SIZE kernels
Linus Torvalds [Wed, 27 Nov 2024 16:03:38 +0000 (08:03 -0800)]
Merge tag 'vfs-6.13.exec.deny_write_access.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull deny_write_access revert from Christian Brauner:
"It turns out that the mold linker relies on the deny_write_access()
mechanism for executables.
The mold linker tries to open a file for writing and if ETXTBSY is
returned mold falls back to creating a new file"
* tag 'vfs-6.13.exec.deny_write_access.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "fs: don't block i_writecount during exec"
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c412853 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Linus Torvalds [Wed, 27 Nov 2024 02:36:55 +0000 (18:36 -0800)]
Merge tag 'rpmsg-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg update from Bjorn Andersson:
"Correct GLINK driver's decoding of the CMD_OPEN message, as upper half
of the second parameter encodes 'priority', and 'length' is only the
lower half"
* tag 'rpmsg-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
Linus Torvalds [Wed, 27 Nov 2024 02:34:13 +0000 (18:34 -0800)]
Merge tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc
identifier/name human friendly. Add audio DSP support for the Qualcomm
SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver
is performed prior to the firmware enabling the XPU and locking us
out.
Improve error handling, error logging, compile testing support, and a
few other stylistic things across a variety of the drivers"
* tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom: wcss: Remove double assignment in q6v5_wcss_probe()
remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region
remoteproc: qcom_wcnss_iris: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_wcss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe
remoteproc: qcom_q6v5_mss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_adsp: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: disable auto boot for wpss
remoteproc: qcom: pas: Make remoteproc name human friendly
remoteproc: qcom: pas: enable SAR2130P audio DSP support
remoteproc: qcom: pas: add minidump_id to SM8350 resources
dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Add SM8750 ADSP
remoteproc: qcom: wcss: Remove subdevs on the error path of q6v5_wcss_probe()
remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe()
remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe()
remoteproc: Switch back to struct platform_driver::remove()
remoteproc: k3-dsp: Force cast from iomem address space
remoteproc: k3-r5: Force cast from iomem address space
...
Linus Torvalds [Wed, 27 Nov 2024 02:28:11 +0000 (18:28 -0800)]
Merge tag 'hwmon-for-v6.13-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- aquacomputer_d5next: Fix length of speed_input array
- tps23861: Fix reporting of negative temperatures
- tmp108: Do not fail in I3C probe when I3C regmap is a module
* tag 'hwmon-for-v6.13-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aquacomputer_d5next) Fix length of speed_input array
hwmon: (tps23861) Fix reporting of negative temperatures
hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module
Linus Torvalds [Wed, 27 Nov 2024 02:23:31 +0000 (18:23 -0800)]
Merge tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- avoid possible deadlock on probe
- ensured preferred address is used on hot-join
Drivers:
- dw: add AMD I3C controller support
- mipi-i3c-hci: fix SETDASA, DMA interrupts fixes
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
i3c: mipi-i3c-hci: Support SETDASA CCC
i3c: dw: Add quirk to address OD/PP timing issue on AMD platform
i3c: dw: Add support for AMDI0015 ACPI ID
i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter
i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK
i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled
i3c: mipi-i3c-hci: Handle interrupts according to current specifications
i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin
i3c: master: svc: fix possible assignment of the same address to two devices
i3c: master: svc: wait for Manual ACK/NACK Done before next step
i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work()
i3c: master: svc: need check IBIWON for dynamic address assignment
i3c: master: svc: manually emit NACK/ACK for hotjoin
i3c: master: svc: use repeat start when IBI WIN happens
i3c: master: Fix dynamic address leak when 'assigned-address' is present
i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED
i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS
Linus Torvalds [Wed, 27 Nov 2024 02:05:44 +0000 (18:05 -0800)]
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
Linus Torvalds [Wed, 27 Nov 2024 01:54:58 +0000 (17:54 -0800)]
rust: fix up formatting after merge
When I merged the rust 'use' imports, I didn't realize that there's
an offical preferred idiomatic format - so while it all worked fine,
it doesn't match what 'make rustfmt' wants to make it.
Fix it up appropriately.
Suggested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 26 Nov 2024 22:54:00 +0000 (14:54 -0800)]
Merge tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report:
- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.
The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.
- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.
The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.
- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.
Internals:
- Do not set exclude_guest bit in the perf_event_attr by default.
This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.
- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.
JSON vendor events:
- Add AMD Zen 5 events and metrics.
- Add i.MX91 and i.MX95 DDR metrics
- Fix HiSilicon HIP08 Topdown metric name.
- Support compat events on PowerPC"
* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...
Linus Torvalds [Tue, 26 Nov 2024 22:49:20 +0000 (14:49 -0800)]
Merge tag 'parisc-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture update from Helge Deller:
- Fix function graph tracing disablement on parisc
* tag 'parisc-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/ftrace: Fix function graph tracing disablement
Linus Torvalds [Tue, 26 Nov 2024 22:47:58 +0000 (14:47 -0800)]
Merge tag 'm68knommu-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- only include FEC platform entries when hardware supports it
- fix typo in ifdef config name
* tag 'm68knommu-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/device.c: only build FEC when HW macros are defined
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
Linus Torvalds [Tue, 26 Nov 2024 22:00:26 +0000 (14:00 -0800)]
Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
Linus Torvalds [Tue, 26 Nov 2024 21:44:27 +0000 (13:44 -0800)]
Merge tag 'docs-6.13-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A few late-arriving fixes, plus two more significant changes that were
*almost* ready at the beginning of the merge window:
- A new document on debugging techniques from Sebastian Fricke
- A clarification on MODULE_LICENSE terms meant to head off the sort
of confusion that led to the recent Tuxedo Computers mess"
* tag 'docs-6.13-2' of git://git.lwn.net/linux:
docs: Add debugging guide for the media subsystem
docs: Add debugging section to process
docs/licensing: Clarify wording about "GPL" and "Proprietary"
docs: core-api/gfp_mask-from-fs-io: indicate that vmalloc supports GFP_NOFS/GFP_NOIO
Documentation: kernel-doc: enumerate identifier *type*s
Documentation: pwrseq: Fix trivial misspellings
Documentation: filesystems: update filename extensions
Linus Torvalds [Tue, 26 Nov 2024 21:39:02 +0000 (13:39 -0800)]
Merge tag 'vfs-6.13.ecryptfs.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ecryptfs mount api conversion from Christian Brauner:
"Convert ecryptfs to the new mount api"
* tag 'vfs-6.13.ecryptfs.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Fix spelling mistake "validationg" -> "validating"
ecryptfs: Convert ecryptfs to use the new mount API
ecryptfs: Factor out mount option validation
Linus Torvalds [Tue, 26 Nov 2024 21:26:15 +0000 (13:26 -0800)]
Merge tag 'vfs-6.13.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs exportfs updates from Christian Brauner:
"This contains work to bring NFS connectable file handles to userspace
servers.
The name_to_handle_at() system call is extended to encode connectable
file handles. Such file handles can be resolved to an open file with a
connected path. So far userspace NFS servers couldn't make use of this
functionality even though the kernel does already support it. This is
achieved by introducing a new flag for name_to_handle_at().
Similarly, the open_by_handle_at() system call is tought to understand
connectable file handles explicitly created via name_to_handle_at()"
* tag 'vfs-6.13.exportfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: open_by_handle_at() support for decoding "explicit connectable" file handles
fs: name_to_handle_at() support for "explicit connectable" file handles
fs: prepare for "explicit connectable" file handles
projects / users / jedix / linux-maple.git / log