Currently the (possibly compound) page used for receive buffers are
freed using __free_pages(). But according to this comment above the
definition of that function, that's wrong:
If you want to use the page's reference count to decide when
to free the allocation, you should allocate a compound page,
and use put_page() instead of __free_pages().
Convert the call to __free_pages() in ipa_endpoint_trans_release()
to use put_page() instead.
It is possibe that probe failure issue happens when the device
and its child_device's probe happens at the same time.
In coresight_make_links, has_conns_grp is true for parent, but
has_conns_grp is false for child device as has_conns_grp is set
to true in coresight_create_conns_sysfs_group. The probe of parent
device will fail at this condition. Add has_conns_grp check for
child device before make the links and make the process from
device_register to connection_create be atomic to avoid this
probe failure issue.
Cc: stable@vger.kernel.org Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Suggested-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> Link: https://lore.kernel.org/r/20220309142206.15632-1-quic_jinlmao@quicinc.com
[ Added Cc stable ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.
Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.
This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.
The following keeps flipping on and off iolatency on sda:
If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.
This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.
This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Liu Bo <bo.liu@linux.alibaba.com> Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter") Cc: stable@vger.kernel.org # v5.0+ Link: https://lore.kernel.org/r/Yn9ScX6Nx2qIiQQi@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if (cfile) {
cifsFileInfo_put(cfile); // sends SMB2_CLOSE to the server
cfile = NULL;
This is triggered by smb2_query_path_info operation that happens during
revalidate_dentry. In smb2_query_path_info, get_readable_path is called to
load the cfile, increasing the reference counter. If in the meantime, this
reference becomes the very last, this call to cifsFileInfo_put(cfile) will
trigger a SMB2_CLOSE request sent to the server just before sending this compound
request – and so then the compound request fails either with EBADF/EIO depending
on the timing at the server, because the handle is already closed.
In the first scenario, the race seems to be happening between smb2_query_path_info
triggered by the rename operation, and between “cleanup” of asynchronous writes – while
fsync(fd) likely waits for the asynchronous writes to complete, releasing the writeback
structures can happen after the close(fd) call. So the EBADF/EIO errors will pop up if
the timing is such that:
1) There are still outstanding references after close(fd) in the writeback structures
2) smb2_query_path_info successfully fetches the cfile, increasing the refcounter by 1
3) All writeback structures release the same cfile, reducing refcounter to 1
4) smb2_compound_op is called with that cfile
In the second scenario, the race seems to be similar – here open triggers the
smb2_query_path_info operation, and if all other threads in the meantime decrease the
refcounter to 1 similarly to the first scenario, again SMB2_CLOSE will be sent to the
server just before issuing the compound request. This case is harder to reproduce.
See https://bugzilla.samba.org/show_bug.cgi?id=15051
Cc: stable@vger.kernel.org Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name") Signed-off-by: Ondrej Hubsch <ohubsch@purestorage.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.
The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.
To fix the bug, return 'crtc' when found, otherwise return NULL.
The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.
When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.
Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)
The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.
When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.
The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.
This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.
During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.
After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().
That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.
In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.
The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.
But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.
This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
to prevent the root node gets split by I/Os from other registered
bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
succeeds to create.
- When wait for all dirty key counting threads to finish, use
wait_event() to replace wait_event_interruptible().
With the above changes, the code is more clear, and some potential error
conditions are avoided.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8e7102273f59 ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.
This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
multiple threads. Although currently it is not mandatory but it is
good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
to replace wait_event_interruptible().
With this change, the code is more clear, and some potential error
conditions are avoided.
Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two bugs are here:
if (encoder) {
if (bridge && bridge->timings)
The list iterator value 'encoder/bridge' will *always* be set and
non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is
incorrect to assume that the iterator value will be NULL if the
list is empty or no element is found.
To fix the bug, use a new variable '*_iter' as the list iterator,
while use the old variable 'encoder/bridge' as a dedicated pointer
to point to the found element.
If the previous list_for_each_entry_continue_rcu() don't exit early
(no goto hit inside the loop), the iterator 'cvif' after the loop
will be a bogus pointer to an invalid structure object containing
the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that
will lead to a invalid memory access (i.e., 'cvif->id': the invalid
pointer dereference when return back to/after the callsite in the
carl9170_update_beacon()).
The original intention should have been to return the valid 'cvif'
when found in list, NULL otherwise. So just return NULL when no
entry found, to fix this bug.
Cc: stable@vger.kernel.org Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.
Cc: stable@vger.kernel.org Reported-by: pa@panix.com Tested-by: pa@panix.com Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit a69755b18774 ("xtensa simdisk: switch to proc_create_data()")
split read operation into two parts, first retrieving the path when it's
non-null and second retrieving the trailing '\n'. However when the path
is non-null the first simple_read_from_buffer updates ppos, and the
second simple_read_from_buffer returns 0 if ppos is greater than 1 (i.e.
almost always). As a result reading from that proc file is almost always
empty.
Fix it by making a temporary copy of the path with the trailing '\n' and
using simple_read_from_buffer on that copy.
Cc: stable@vger.kernel.org Fixes: a69755b18774 ("xtensa simdisk: switch to proc_create_data()") Signed-off-by: Yi Yang <yiyang13@huawei.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared. If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses. For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area. However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page. That
wastes CPU cycles as the unmapped/unshared range is scanned twice.
Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:
| CC mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
| of `struct plist_node[]' [-Werror=array-bounds]
| 2291 | p->avail_lists[i].prio = 1;
| | ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
| 292 | struct plist_node avail_lists[]; /*
| | ^~~~~~~~~~~
This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.
I believe that the warning/error is legitimate. I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.
However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.
This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test. Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop. It will still only be tested once. This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.
Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com Signed-off-by: Christophe de Dinechin <christophe@dinechin.org> Signed-off-by: Christophe de Dinechin <dinechin@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Segall <bsegall@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
One way to trigger this is:
1. load a livepatch that patches kernel function xxx;
2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now);
3. repeat #2 => gpf.
This is because the entry is added to direct_functions, but not removed.
Fix this by remove the entry from direct_functions when
register_ftrace_direct fails.
Also remove the last trailing space from ftrace.c, so we don't have to
worry about it anymore.
Link: https://lkml.kernel.org/r/20220524170839.900849-1-song@kernel.org Cc: stable@vger.kernel.org Fixes: 763e34e74bb7 ("ftrace: Add register_ftrace_direct()") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.
==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1
The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).
As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.
Fix that and make it more obvious by using a separate
variable for the pid.
Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()") Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In client mode, we can't connect to hidden SSID APs or SSIDs not advertised
in beacons on DFS channels, since we're forced to passive scan. Fix this by
sending out a probe request immediately after the first beacon, if active
scan was requested by the user.
Cc: stable@vger.kernel.org Reported-by: Catrinel Catrinescu <cc@80211.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When irq-xtensa-mx chip is used in non-SMP configuration its
irq_set_affinity callback is not called leaving IRQ affinity set empty.
As a result IRQ delivery does not work in that configuration.
Initialize IRQ affinity of the xtensa MX interrupt distributor to CPU 0
for all external IRQ lines.
Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register ARMADA_370_XP_INT_FABRIC_MASK_OFFS is Armada 370 and XP specific
and on new Armada platforms it has different meaning. It does not configure
Performance Counter Overflow interrupt masking. So do not touch this
register on non-A370/XP platforms (A375, A38x and A39x).
Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Fixes: 28da06dfd9e4 ("irqchip: armada-370-xp: Enable the PMU interrupts") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220425113706.29310-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
When multiplying of different types, an overflow is possible even when
storing the result in a larger type. This is because the conversion is
done after the multiplication. So arithmetic overflow and thus in
incorrect value is possible.
Correct an instance of this in the inter packet delay calculation. Fix by
ensuring one of the operands is u64 which will promote the other to u64 as
well ensuring no overflow.
Cc: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20220520183712.48973.29855.stgit@awfm-01.cornelisnetworks.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a config option to guard (future) usage of asm_volatile_goto() that
includes "tied outputs", i.e. "+" constraints that specify both an input
and output parameter. clang-13 has a bug[1] that causes compilation of
such inline asm to fail, and KVM wants to use a "+m" constraint to
implement a uaccess form of CMPXCHG[2]. E.g. the test code fails with
<stdin>:1:29: error: invalid operand in inline asm: '.long (${1:l}) - .'
int foo(int *x) { asm goto (".long (%l[bar]) - .\n": "+m"(*x) ::: bar); return *x; bar: return 0; }
^
<stdin>:1:29: error: unknown token in expression
<inline asm>:1:9: note: instantiated into assembly here
.long () - .
^
2 errors generated.
on clang-13, but passes on gcc (with appropriate asm goto support). The
bug is fixed in clang-14, but won't be backported to clang-13 as the
changes are too invasive/risky.
gcc also had a similar bug[3], fixed in gcc-11, where gcc failed to
account for its behavior of assigning two numbers to tied outputs (one
for input, one for output) when evaluating symbolic references.
The original 'ima' measurement list template contains a hash, defined
as 20 bytes, and a null terminated pathname, limited to 255
characters. Other measurement list templates permit both larger hashes
and longer pathnames. When the "ima" template is configured as the
default, a new measurement list template (ima_template=) must be
specified before specifying a larger hash algorithm (ima_hash=) on the
boot command line.
To avoid this boot command line ordering issue, remove the legacy "ima"
template configuration option, allowing it to still be specified on the
boot command line.
The root cause of this issue is that during the processing of ima_hash,
we would try to check whether the hash algorithm is compatible with the
template. If the template is not set at the moment we do the check, we
check the algorithm against the configured default template. If the
default template is "ima", then we reject any hash algorithm other than
sha1 and md5.
For example, if the compiled default template is "ima", and the default
algorithm is sha1 (which is the current default). In the cmdline, we put
in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be
that ima starts with ima-ng as the template and sha256 as the hash
algorithm. However, during the processing of "ima_hash=",
"ima_template=" has not been processed yet, and hash_setup would check
the configured hash algorithm against the compiled default: ima, and
reject sha256. So at the end, the hash algorithm that is actually used
will be sha1.
With template "ima" removed from the configured default, we ensure that
the default tempalte would at least be "ima-ng" which allows for
basically any hash algorithm.
This change would not break the algorithm compatibility checks for IMA.
Add H264 level 1.0, 4.1, 4.2 to the list of supported formats.
While the hardware does not fully support these levels, it does support
most of them. The constraints on frame size and pixel formats already
cover the limitation.
This fixes negotiation of level on GStreamer 1.17.1.
The CODA960 manual states that ASO/FMO features of baseline are not
supported, so for this reason this driver should only report
constrained baseline support.
This fixes negotiation issue with constrained baseline content
on GStreamer 1.17.1.
ASO/FMO features are unsupported for the encoder and untested for the
decoder because there is currently no userspace support. Neither GStreamer
parsers nor FFMPEG parsers support ASO/FMO.
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.
The bug is here:
if (!rdev || rdev->desc_nr != nr) {
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org Fixes: 70bcecdb1534 ("md-cluster: Improve md_reload_sb to be less error prone") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org Fixes: 2aa82191ac36 ("md-cluster: Perform a lazy update") Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VBT send packet port selection was never updated for ICL+ where the
2nd link is on port B instead of port C as in VLV+ DSI.
First, single link DSI needs to use the configured port instead of
relying on the VBT sequence block port. Remove the hard-coded port C
check here and make it generic. For reference, see commit f915084edc5a
("drm/i915: Changes related to the sequence port no for") for the
original VLV specific fix.
Second, the sequence block port number is either 0 or 1, where 1
indicates the 2nd link. Remove the hard-coded port C here for 2nd
link. (This could be a "find second set bit" on DSI ports, but just
check the two possible options.)
Third, sanity check the result with a warning to avoid a NULL pointer
dereference.
If the display is not enable()d, then we aren't holding a runtime PM
reference here. Thus, it's easy to accidentally cause a hang, if user
space is poking around at /dev/drm_dp_aux0 at the "wrong" time.
Let's get a runtime PM reference, and check that we "see" the panel.
Don't force any panel power-up, etc., because that can be intrusive, and
that's not what other drivers do (see
drivers/gpu/drm/bridge/ti-sn65dsi86.c and
drivers/gpu/drm/bridge/parade-ps8640.c.)
Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code") Cc: <stable@vger.kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.
To fix this bug, just return 'encoder' when found, otherwise return
NULL.
The bug is here:
if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp))
return cstate;
The list iterator value 'cstate' will *always* be set and non-NULL
by list_for_each_entry_from_reverse(), so it is incorrect to assume
that the iterator value will be unchanged if the list is empty or no
element is found (In fact, it will be a bogus pointer to an invalid
structure object containing the HEAD). Also it missed a NULL check
at callsite and may lead to invalid memory access after that.
To fix this bug, just return 'encoder' when found, otherwise return
NULL. And add the NULL check.
Cc: stable@vger.kernel.org Fixes: 1f7f3d91ad38a ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the mapping is already reaped the unmap must be a no-op, as we
would otherwise try to remove the mapping twice, corrupting the involved
data structures.
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached the
UFS device. There is a good chance that the write could be stored in a
Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.
So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().
Also, the wmb() after writel_relaxed() is not really needed. Both writel()
and readl() are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with read
value on weakly ordered architectures. So it can be safely removed.
Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list iterator 'p' will point to a bogus position containing HEAD if the
list is empty or no element is found. This case must be checked before any
use of the iterator, otherwise it will lead to an invalid memory access.
To fix this bug, add a check. Use a new variable 'iter' as the list
iterator, and use the original variable 'p' as a dedicated pointer to point
to the found element.
Link: https://lore.kernel.org/r/20220414040231.2662-1-xiam0nd.tong@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When user_dlm_destroy_lock failed, it didn't clean up the flags it set
before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of
lock is still in used, next time when unlink invokes this function, it
will return succeed, and then unlink will remove inode and dentry if lock
is not in used(file closed), but the dlm lock is still linked in dlm lock
resource, then when bast come in, it will trigger a panic due to
user-after-free. See the following panic call trace. To fix this,
USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should
be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink
fail.
For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN,
USER_LOCK_BUSY is also required to be cleared. Even though spin lock is
released in between, but USER_LOCK_IN_TEARDOWN is still set, for
USER_LOCK_BUSY, if before every place that waits on this flag,
USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow
waits on the busy flag set by user_dlm_destroy_lock(), then we can
simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix
user_dlm_cluster_lock() which is the only function not following this.
Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an invalid read showed by KASAN. A unlock will allocate a
"struct plock_op" and a followed send_op() will append it to a global
send_list data structure. In some cases a followed dev_read() moves it
to recv_list and dev_write() will cast it to "struct plock_xop" and access
fields which are only available in those structures. At this point an
invalid read happens by accessing those fields.
To fix this issue the "callback" field is moved to "struct plock_op" to
indicate that a cast to "plock_xop" is allowed and does the additional
"plock_xop" handling if set.
Example of the KASAN output which showed the invalid read:
[ 2064.296453] ==================================================================
[ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm]
[ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484
[ 2064.308168]
[ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9
[ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 2064.311618] Call Trace:
[ 2064.312218] dump_stack_lvl+0x56/0x7b
[ 2064.313150] print_address_description.constprop.8+0x21/0x150
[ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.316595] kasan_report.cold.14+0x7f/0x11b
[ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.318687] dev_write+0x52b/0x5a0 [dlm]
[ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm]
[ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10
[ 2064.321926] vfs_write+0x17e/0x930
[ 2064.322769] ? __fget_light+0x1aa/0x220
[ 2064.323753] ksys_write+0xf1/0x1c0
[ 2064.324548] ? __ia32_sys_read+0xb0/0xb0
[ 2064.325464] do_syscall_64+0x3a/0x80
[ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.327606] RIP: 0033:0x7f807e4ba96f
[ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48
[ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f
[ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010
[ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001
[ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80
[ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001
[ 2064.342857]
[ 2064.343226] Allocated by task 12438:
[ 2064.344057] kasan_save_stack+0x1c/0x40
[ 2064.345079] __kasan_kmalloc+0x84/0xa0
[ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220
[ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm]
[ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0
[ 2064.351070] fcntl_setlk+0x281/0xbc0
[ 2064.352879] do_fcntl+0x5e4/0xfe0
[ 2064.354657] __x64_sys_fcntl+0x11f/0x170
[ 2064.356550] do_syscall_64+0x3a/0x80
[ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.360745]
[ 2064.361511] Last potentially related work creation:
[ 2064.363957] kasan_save_stack+0x1c/0x40
[ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.368100] call_rcu+0x11b/0xf70
[ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.372404] receive_from_sock+0x290/0x770 [dlm]
[ 2064.374607] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.377290] process_one_work+0x9a8/0x16e0
[ 2064.379357] worker_thread+0x87/0xbf0
[ 2064.381188] kthread+0x3ac/0x490
[ 2064.383460] ret_from_fork+0x22/0x30
[ 2064.385588]
[ 2064.386518] Second to last potentially related work creation:
[ 2064.389219] kasan_save_stack+0x1c/0x40
[ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.393303] call_rcu+0x11b/0xf70
[ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.397694] receive_from_sock+0x290/0x770 [dlm]
[ 2064.399932] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.402180] process_one_work+0x9a8/0x16e0
[ 2064.404388] worker_thread+0x87/0xbf0
[ 2064.406124] kthread+0x3ac/0x490
[ 2064.408021] ret_from_fork+0x22/0x30
[ 2064.409834]
[ 2064.410599] The buggy address belongs to the object at ffff88800ef22780
[ 2064.410599] which belongs to the cache kmalloc-96 of size 96
[ 2064.416495] The buggy address is located 88 bytes inside of
[ 2064.416495] 96-byte region [ffff88800ef22780, ffff88800ef227e0)
[ 2064.422045] The buggy address belongs to the page:
[ 2064.424635] page:00000000b6bef8bc refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xef22
[ 2064.428970] flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff)
[ 2064.432515] raw: 000fffffc0000200ffffea0000d68b800000001400000014ffff888001041780
[ 2064.436110] raw: 0000000000000000000000008020002000000001ffffffff0000000000000000
[ 2064.439813] page dumped because: kasan: bad access detected
[ 2064.442548]
[ 2064.443310] Memory state around the buggy address:
[ 2064.445988] ffff88800ef22680: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.449444] ffff88800ef22700: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.452941] >ffff88800ef22780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
[ 2064.456383] ^
[ 2064.459386] ffff88800ef22800: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
[ 2064.462788] ffff88800ef22880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.466239] ==================================================================
reproducer in python:
import argparse
import struct
import fcntl
import os
parser = argparse.ArgumentParser()
parser.add_argument('-f', '--file',
help='file to use fcntl, must be on dlm lock filesystem e.g. gfs2')
Since commit 1179f170b6f0 ("s390: fix fpu restore in entry.S"), the
sie_block pointer is located at empty1[1], but in sie_block() it was
taken from empty1[0].
This leads to a random pointer being dereferenced, possibly causing
system crash.
This problem can be observed when running a simple guest with an endless
loop and recording the cpu-clock event:
sudo perf kvm --guestvmlinux=<guestkernel> --guest top -e cpu-clock
With this fix, the correct guest address is shown.
At present, pages not in the target zone are added to cc->migratepages
list in isolate_migratepages_block(). As a result, pages may migrate
between nodes unintentionally.
This would be a serious problem for older kernels without commit a984226f457f849e ("mm: memcontrol: remove the pgdata parameter of
mem_cgroup_page_lruvec"), because it can corrupt the lru list by
handling pages in list without holding proper lru_lock.
Avoid returning a pfn outside the target zone in the case that it is
not aligned with a pageblock boundary. Otherwise
isolate_migratepages_block() will handle pages not in the target zone.
Link: https://lkml.kernel.org/r/20220511044300.4069-1-yamamoto.rei@jp.fujitsu.com Fixes: 70b44595eafe ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Don Dutile <ddutile@redhat.com> Cc: Wonhyuk Yang <vvghjk1234@gmail.com> Cc: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry. Add the appropriate braces.
Found by:
$ make W=1 drivers/pci/pci.o
CC drivers/pci/pci.o
drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
2974 | .ident = "Elo i2",
| ^~~~~~~~
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
struct acpi_device_properties describes one source of properties present
on either struct acpi_device or struct acpi_data_node. When properties are
parsed, both are populated but when released, only those properties that
are associated with the device node are freed.
Fix this by also releasing memory of the data node properties.
Fixes: 5f5e4890d57a ("ACPI / property: Allow multiple property compatible _DSD entries") Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable@kernel.org Fixes: 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that
we are in the middle of replay the fast commit journal. This was
actually a mistake, since the sbi->s_mount_info is initialized from
es->s_state. Arguably s_mount_state is misleadingly named, but the
name is historical --- s_mount_state and s_state dates back to ext2.
What should have been used is the ext4_{set,clear,test}_mount_flag()
inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags.
The problem with using EXT4_FC_REPLAY is that a maliciously corrupted
superblock could result in EXT4_FC_REPLAY getting set in
s_mount_state. This bypasses some sanity checks, and this can trigger
a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter
out the EXT4_FC_REPLAY bit for now. We should eventually transition
away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode. But there maybe already
convert from inline to extent. To solve this issue, we call
filemap_flush first..
Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reason is first directory entry which 'rec_len' is 34478, then will get illegal
parent entry. Now, we do not check directory entry after read directory block
in 'ext4_get_first_dir_block'.
To solve this issue, check directory entry in 'ext4_get_first_dir_block'.
[ Trigger an ext4_error() instead of just warning if the directory is
missing a '.' or '..' entry. Also make sure we return an error code
if the file system is corrupted. -TYT ]
Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220414025223.4113128-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Track whether bfq_group is still online. We cannot rely on
blkcg_gq->online because that gets cleared only after all policies are
offlined and we need something that gets updated already under
bfqd->lock when we are cleaning up our bfq_group to be able to guarantee
that when we see online bfq_group, it will stay online while we are
holding bfqd->lock lock.
CC: stable@vger.kernel.org Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio().
CC: stable@vger.kernel.org Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-4-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bfqq is shared by multiple processes it can happen that one of the
processes gets moved to a different cgroup (or just starts submitting IO
for different cgroup). In case that happens we need to split the merged
bfqq as otherwise we will have IO for multiple cgroups in one bfqq and
we will just account IO time to wrong entities etc.
Similarly if the bfqq is scheduled to merge with another bfqq but the
merge didn't happen yet, cancel the merge as it need not be valid
anymore.
CC: stable@vger.kernel.org Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace 1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash.
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
The bug is due to fuzzed inode has both inline_data and encrypted flags.
During f2fs_evict_inode(), as the inode was deleted by rename(), it
will cause inline data conversion due to conflicting flags. The page
cache will be polluted and the panic will be triggered in clear_inode().
Try fixing the bug by doing more sanity checks for inline data inode in
sanity_check_inode().
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
The root cause is: ckpt.valid_block_count is inconsistent with SIT table,
stat info indicates filesystem has free blocks, but SIT table indicates
filesystem has no free segment.
So that during garbage colloection, it triggers panic when LFS allocator
fails to find free segment.
This patch tries to fix this issue by checking consistency in between
ckpt.valid_block_count and block accounted from SIT.
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is: in a very small sized image, it's very easy to
exceed threshold of foreground GC, if we calculate free space and
dirty data based on section granularity, in corner case,
has_not_enough_free_secs() will always return true, result in
deadloop in f2fs_gc().
So this patch refactors has_not_enough_free_secs() as below to fix
this issue:
1. calculate needed space based on block granularity, and separate
all blocks to two parts, section part, and block part, comparing
section part to free section, and comparing block part to free space
in openned log.
2. account F2FS_DIRTY_NODES, F2FS_DIRTY_IMETA and F2FS_DIRTY_DENTS
as node block consumer;
3. account F2FS_DIRTY_DENTS as data block consumer;
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is: inode node and dnode node share the same nid,
so during f2fs_evict_inode(), dnode node truncation will invalidate
its NAT entry, so when truncating inode node, it fails due to
invalid NAT entry, result in inode is still marked as dirty, fix
this issue by clearing dirty for inode and setting SBI_NEED_FSCK
flag in filesystem.
output from dump.f2fs:
[print_node_info: 354] Node ID [0xf:15] is inode
i_nid[0] [0x f : 15]
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is, after image was fuzzed, block mapping info in inode
will be inconsistent with SIT table, so in f2fs_fallocate(), it will cause
panic when updating SIT with invalid blkaddr.
Let's fix the issue by adding sanity check on block address before updating
SIT table with it.
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is: .total_valid_block_count or .total_valid_node_count
could fuzzed to zero, then once dec_valid_node_count() was called, it
will cause BUG_ON(), this patch fixes to print warning info and set
SBI_NEED_FSCK into CP instead of panic.
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Fixes: 5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser") Reported-by: Joe Mario <jmario@redhat.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On some platforms in rare cases (1 to 100,000 transactions),
the i2c gets a spurious interrupt which means that we enter an interrupt
but in the interrupt handler we don't find any status bit that points to
the reason we got this interrupt.
This may be a case of a rare HW issue or signal integrity issue that is
still under investigation.
In order to overcome this we are doing the following:
1. Disable incoming interrupts in master mode only when slave mode is not
enabled.
2. Clear end of busy (EOB) after every interrupt.
3. Clear other status bits (just in case since we found them cleared)
4. Return correct status during the interrupt that will finish the
transaction.
On next xmit transaction if the bus is still busy the master will issue a
recovery process before issuing the new transaction.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always
incorrect, but simply didn't cause a visible error on the 32-bit machine.
On the 64-bit machine, the kernel message reports that ESR value is
0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that
it's the alignment fault.
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738eec ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
The parameter to pass back to the handler function when irq has been
requested is a struct stm32_mdma_device pointer, not a struct
stm32_mdma_chan pointer.
Even if chan is reinit later in the function, remove this wrong
initialization.
GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak.
Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 587f03deb69b caused pnfs_update_layout() to stop returning ENOMEM
when the memory allocation fails, and hence causes it to fall back to
trying to do I/O through the MDS. There is no guarantee that this will
fare any better. If we're failing the pNFS layout allocation, then we
should just redirty the page and retry later.
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes: 2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log