rvt_destroy_qp() cannot complete until all in process packets have
been released from the underlying hardware. If a link down event
occurs, an application can hang with a kernel stack similar to:
quiesce_qp() waits until all outstanding packets have been freed.
This wait should be momentary. During a link down event, the cleanup
handling does not ensure that all packets caught by the link down are
flushed properly.
This is caused by the fact that the freeze path and the link down
event is handled the same. This is not correct. The freeze path
waits until the HFI is unfrozen and then restarts PIO. A link down
is not a freeze event. The link down path cannot restart the PIO
until link is restored. If the PIO path is restarted before the link
comes up, the application (QP) using the PIO path will hang (until
link is restored).
Fix by separating the linkdown path from the freeze path and use the
link down path for link down events.
Close a race condition sc_disable() by acquiring both the progress
and release locks.
Close a race condition in sc_stop() by moving the setting of the flag
bits under the alloc lock.
Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Gen3, we can only do RXDMA once per transfer reliably. For that, we
must reset the device, then we can have RXDMA once. This patch
implements this. When there is no reset controller or the reset fails,
RXDMA will be blocked completely. Otherwise, it will be disabled after
the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu
Yamasaki, yet completely refactored to handle multiple read messages
within one transfer.
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887 Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Daniel Scheller <d.scheller.oss@gmail.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
(cherry picked from commit 90c3e2198777aaa355b6994a31a79c636c8d4306) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We broke the LVDS notifier resume thing in (presumably) commit e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.
Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).
If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.
With the notifier gone we'll also stop looking at the panel status
in ->detect().
Natanael Copa [Thu, 18 Oct 2018 15:04:17 +0000 (17:04 +0200)]
HID: quirks: fix support for Apple Magic Keyboards
Commit b6cc0ba2cbf4 (HID: add support for Apple Magic Keyboards)
backported support for the Magic Keyboard over Bluetooth, but did not
add the BT_VENDOR_ID_APPLE to hid_have_special_driver[] so the hid-apple
driver is never loaded and Fn key does not work at all.
Adding BT_VENDOR_ID_APPLE to hid_have_special_driver[] is not needed
after commit e04a0442d33b (HID: core: remove the absolute need of
hid_have_special_driver[]), so 4.16 kernels and newer does not need it.
Fixes: b6cc0ba2cbf4 (HID: add support for Apple Magic Keyboards)
Bugzilla-id: https://bugzilla.kernel.org/show_bug.cgi?id=99881 Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's not much sense in doing that because if user or
his build-system didn't set CROSS_COMPILE we still may
very well make incorrect guess.
But as it turned out setting CROSS_COMPILE is not as harmless
as one may think: with recent changes that implemented automatic
discovery of __host__ gcc features unconditional setup of
CROSS_COMPILE leads to failures on execution of "make xxx_defconfig"
with absent cross-compiler, for more info see [1].
Set CROSS_COMPILE as well gets in the way if we want only to build
.dtb's (again with absent cross-compiler which is not really needed
for building .dtb's), see [2].
Note, we had to change LIBGCC assignment type from ":=" to "="
so that is is resolved on its usage, otherwise if it is resolved
at declaration time with missing CROSS_COMPILE we're getting this
error message from host GCC:
| gcc: error: unrecognized command line option -mmedium-calls
| gcc: error: unrecognized command line option -mno-sdata
This check is very naive: we simply test if GCC invoked without
"-mcpu=XXX" has ARC700 define set. In that case we think that GCC
was built with "--with-cpu=arc700" and has libgcc built for ARC700.
Otherwise if ARC700 is not defined we think that everythng was built
for ARCv2.
But in reality our life is much more interesting.
1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu"
it may generate code for any ARC core).
2. libgcc might be built with explicitly specified "--mcpu=YYY"
That's exactly what happens in case of multilibbed toolchains:
- GCC is configured with default settings
- All the libs built for many different CPU flavors
I.e. that check gets in the way of usage of multilibbed
toolchains. And even non-multilibbed toolchains are affected.
OpenEmbedded also builds GCC without "--with-cpu" because
each and every target component later is compiled with explicitly
set "-mcpu=ZZZ".
Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case. What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages". No, mremap() obviously just _moves_ the page from one page
table location to another.
That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.
As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).
This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.
feature fixups need to use patch_instruction() early in the boot,
even before the code is relocated to its final address, requiring
patch_instruction() to use PTRRELOC() in order to address data.
But feature fixups applies on code before it is set to read only,
even for modules. Therefore, feature fixups can use
raw_patch_instruction() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: David Gounaris <david.gounaris@infinera.com> Tested-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Current we store the userspace r1 to PACATMSCRATCH before finally
saving it to the thread struct.
In theory an exception could be taken here (like a machine check or
SLB miss) that could write PACATMSCRATCH and hence corrupt the
userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but
others do.
We've never actually seen this happen but it's theoretically
possible. Either way, the code is fragile as it is.
This patch saves r1 to the kernel stack (which can't fault) before we
turn MSR[RI] back on. PACATMSCRATCH is still used but only with
MSR[RI] off. We then copy r1 from the kernel stack to the thread
struct once we have MSR[RI] back on.
Suggested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we treclaim we store the userspace checkpointed r13 to a scratch
SPR and then later save the scratch SPR to the user thread struct.
Unfortunately, this doesn't work as accessing the user thread struct
can take an SLB fault and the SLB fault handler will write the same
scratch SPRG that now contains the userspace r13.
To fix this, we store r13 to the kernel stack (which can't fault)
before we access the user thread struct.
Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen
as a random userspace segfault with r13 looking like a kernel address.
Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the aspeed MATCH1 register is updated to <current_count -
cycles> in set_next_event handler, with the assumption that COUNT
register value is preserved when the timer is disabled and it continues
decrementing after the timer is enabled. But the assumption is wrong:
RELOAD register is loaded into COUNT register when the aspeed timer is
enabled, which means the next event may be delayed because timer
interrupt won't be generated until <0xFFFFFFFF - current_count +
cycles>.
The problem can be fixed by updating RELOAD register to <cycles>, and
COUNT register will be re-loaded when the timer is enabled and interrupt
is generated when COUNT register overflows.
The test result on Facebook Backpack-CMM BMC hardware (AST2500) shows
the issue is fixed: without the patch, usleep(100) suspends the process
for several milliseconds (and sometimes even over 40 milliseconds);
after applying the fix, usleep(100) takes averagely 240 microseconds to
return under the same workload level.
Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Lei YU <mine260309@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns that the address of a pointer will always evaluated as true
in a boolean context:
drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of
array 'eq->affinity_mask' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
~~~~~^~~~~~~~~~~~~
1 warning generated.
Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add
helper cpumask_available()"), which does the proper checking and avoids
this warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sd_init_command() get's a command with a unknown req_op() it crashes the
system via BUG().
This makes debugging the actual reason for the broken request cmd_flags pretty
hard as the system is down before it's able to write out debugging data on the
serial console or the trace buffer.
Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and
return an I/O error to the producer of the request.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While dlpar adding primary ipr adapter back, driver goes through adapter
initialization then schedule ipr_worker_thread to start te disk scan by
dropping the host lock, calling scsi_add_device. Then get the adapter reset
request again, so driver does scsi_block_requests, this will cause the
scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread
to do the unblock because its stuck in scsi_add_device.
This patch fixes the issue.
[mkp: typo and whitespace fixes]
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, if userspace calls drm_wait_vblank before the crtc is
activated the crtc vblank_enable hook is called, which in case of
malidp driver triggers some warninngs. This happens because on
device init we don't inform the drm core about the vblank state
by calling drm_crtc_vblank_on/off/reset which together with
drm_vblank_get have some magic that prevents calling drm_vblank_enable
when crtc is off.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When programming the inbound/outbound ATUs, we call usleep_range() after
each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming
can be executed in atomic context:
inbound ATU programming could be called through
pci_epc_write_header()
=>dw_pcie_ep_write_header()
=>dw_pcie_prog_inbound_atu()
outbound ATU programming could be called through
pci_bus_read_config_dword()
=>dw_pcie_rd_conf()
=>dw_pcie_prog_outbound_atu()
EtherAVB hardware requires 0 to be written to status register bits in
order to clear them, however, care must be taken not to:
1. Clear other bits, by writing zero to them
2. Write one to reserved bits
This patch corrects the ravb driver with respect to the second point above.
This is done by defining reserved bit masks for the affected registers and,
after auditing the code, ensure all sites that may write a one to a
reserved bit use are suitably masked.
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the Netgear WNDAP620, the emac ethernet isn't receiving nor
xmitting any frames from/to the RTL8363SB (identifies itself
as a RTL8367RB).
This is caused by the emac hardware not knowing the forced link
parameters for speed, duplex, pause, etc.
This begs the question, how this was working on the original
driver code, when it was necessary to set the phy_address and
phy_map to 0xffffffff. But I guess without access to the old
PPC405/440/460 hardware, it's not possible to know.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While reviewing another part of the code, Kees noticed that the strncpy of the
partition name might not always be NUL terminated. Switch to using strscpy
which does this safely.
Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hardif_neigh refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The backbone_gw refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function batadv_tvlv_handler_register is responsible for adding new
tvlv_handler to the handler_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
The function batadv_tt_global_orig_entry_add is responsible for adding new
tt_orig_list_entry to the orig_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function batadv_softif_vlan_get is responsible for adding new
softif_vlan to the softif_vlan_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function batadv_nc_get_nc_node is responsible for adding new nc_nodes
to the in_coding_list and out_coding_list. It first checks whether the
entry already is in the list or not. If it is, then the creation of a new
entry is aborted.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: d56b1705e28c ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function batadv_gw_node_add is responsible for adding new gw_node to
the gateway_list. It is expecting that the caller already checked that
there is not already an entry with the same key or not.
But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.
The check and the manipulation of the list must therefore be in the same
locked code section.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The per hardif sysfs file "batman_adv/elp_interval" is using the generic
functions to store/show uint values. The helper __batadv_store_uint_attr
requires the softif net_device as parameter to print the resulting change
as info text when the users writes to this file. It uses the helper
function batadv_info to add it at the same time to the kernel ring buffer
and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled).
The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.
Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.
Fixes: 0744ff8fa8fa ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The per hardif sysfs file "batman_adv/throughput_override" prints the
resulting change as info text when the users writes to this file. It uses
the helper function batadv_info to add it at the same time to the kernel
ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG
is enabled).
The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.
Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.
Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The probe ELPs for WiFi interfaces are expanded to contain at least
BATADV_ELP_MIN_PROBE_SIZE bytes. This is usually a lot more than the
number of bytes which the template ELP packet requires.
These extra padding bytes were not initialized and thus could contain data
which were previously stored at the same location. It is therefore required
to set it to some predefined or random values to avoid leaking private
information from the system transmitting these kind of packets.
Fixes: e4623c913508 ("batman-adv: Avoid probe ELP information leak") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When less than 3 bytes are written to the device, memcpy is called with
negative array size which leads to buffer overflow and kernel panic. This
patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871
[mchehab+samsung@kernel.org: fix a merge conflict and changed the
condition to match the patch's comment, e. g. len == 3 could
also be valid] Signed-off-by: Jozef Balga <jozef.balga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spectre variant 1 attacks are about this sequence of pseudo-code:
index = load(user-manipulated pointer);
access(base + index * stride);
In order for the cache side-channel to work, the access() must me made
to memory which userspace can detect whether cache lines have been
loaded. On 32-bit ARM, this must be either user accessible memory, or
a kernel mapping of that same user accessible memory.
The problem occurs when the load() speculatively loads privileged data,
and the subsequent access() is made to user accessible memory.
Any load() which makes use of a user-maniplated pointer is a potential
problem if the data it has loaded is used in a subsequent access. This
also applies for the access() if the data loaded by that access is used
by a subsequent access.
Harden the get_user() accessors against Spectre attacks by forcing out
of bounds addresses to a NULL pointer. This prevents get_user() being
used as the load() step above. As a side effect, put_user() will also
be affected even though it isn't implicated.
Also harden copy_from_user() by redoing the bounds check within the
arm_copy_from_user() code, and NULLing the pointer if out of bounds.
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing __get_user() for spectre variant 1 is not sane: we would have to
add address space bounds checking in order to validate that the location
should be accessed, and then zero the address if found to be invalid.
Since __get_user() is supposed to avoid the bounds check, and this is
exactly what get_user() does, there's no point having two different
implementations that are doing the same thing. So, when the Spectre
workarounds are required, make __get_user() an alias of get_user().
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borrow the x86 implementation of __inttype() to use in get_user() to
select an integer type suitable to temporarily hold the result value.
This is necessary to avoid propagating the volatile nature of the
result argument, which can cause the following warning:
lib/iov_iter.c:413:5: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__get_user_error() is used as a fast accessor to make copying structure
members as efficient as possible. However, with software PAN and the
recent Spectre variant 1, the efficiency is reduced as these are no
longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
Rather than using __get_user_error() to copy each semops element member,
copy each semops element in full using __copy_from_user().
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible. However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
Use __copy_from_user() rather than __get_user_err() for individual
members when restoring VFP state.
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible. However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
It becomes much more efficient to use __copy_from_user() instead, so
let's use this for the ARM integer registers.
Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent speculation at the syscall table decoding by clamping the index
used to zero on invalid system call numbers, and using the csdb
speculative barrier.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an implementation of the array_index_mask_nospec() function for
mitigating Spectre variant 1 throughout the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add assembly and C macros for the new CSDB instruction.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Report support for SMCCC_ARCH_WORKAROUND_1 to KVM guests for affected
CPUs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible.
So let's intercept it as early as we can by testing for the
function call number as soon as we've identified a HVC call
coming from the guest.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include Brahma B15 in the Spectre v2 KVM workarounds.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid aliasing attacks against the branch predictor
on Cortex-A15, let's invalidate the BTB on guest exit, which can
only be done by invalidating the icache (with ACTLR[0] being set).
We use the same hack as for A12/A17 to perform the vector decoding.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid aliasing attacks against the branch predictor,
let's invalidate the BTB on guest exit. This is made complicated
by the fact that we cannot take a branch before invalidating the
BTB.
We only apply this to A12 and A17, which are the only two ARM
cores on which this useful.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Warn at error level if the context switching function is not what we
are expecting. This can happen with big.Little systems, which we
currently do not support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add firmware based hardening for cores that require more complex
handling in firmware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to prevent aliasing attacks on the branch predictor,
invalidate the BTB or instruction cache on CPUs that are known to be
affected when taking an abort on a address that is outside of a user
task limit:
If the IBE bit is not set, then there is little point to enabling the
workaround.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the branch predictor hardening is enabled, firmware must have set
the IBE bit in the auxiliary control register. If this bit has not
been set, the Spectre workarounds will not be functional.
Add validation that this bit is set, and print a warning at alert level
if this is not the case.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harden the branch predictor against Spectre v2 attacks on context
switches for ARMv7 and later CPUs. We do this by:
Cortex A9, A12, A17, A73, A75: invalidating the BTB.
Cortex A15, Brahma B15: invalidating the instruction cache.
Cortex A57 and Cortex A72 are not addressed in this patch.
Cortex R7 and Cortex R8 are also not addressed as we do not enforce
memory protection on these cores.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a Kconfig symbol for CPUs which are vulnerable to the Spectre
attacks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for per-processor bug checking - each processor function
descriptor gains a function pointer for this check, which must not be
an __init function. If non-NULL, this will be called whenever a CPU
enters the kernel via which ever path (boot CPU, secondary CPU startup,
CPU resuming, etc.)
This allows processor specific bug checks to validate that workaround
bits are properly enabled by firmware via all entry paths to the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for CPU bugs when secondary processors are being brought online,
and also when CPUs are resuming from a low power mode. This gives an
opportunity to check that processor specific bug workarounds are
correctly enabled for all paths that a CPU re-enters the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the processor bug infrastructure so that it can be expanded to
check for per-processor bugs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CPU part numbers for Cortex A53, A57, A72, A73, A75 and the
Broadcom Brahma B15 CPU.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is
no need to export this vm counter to userspace, and some changes are
expected in reclaimable object accounting, which can alter this counter.
Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indirectly reclaimable memory can consume a significant part of total
memory and it's actually reclaimable (it will be released under actual
memory pressure).
So, the overcommit logic should treat it as free.
Otherwise, it's possible to cause random system-wide memory allocation
failures by consuming a significant amount of memory by indirectly
reclaimable memory, e.g. dentry external names.
If overcommit policy GUESS is used, it might be used for denial of
service attack under some conditions.
The following program illustrates the approach. It causes the kernel to
allocate an unreclaimable kmalloc-256 chunk for each stat() call, so
that at some point the overcommit logic may start blocking large
allocation system-wide.
int main()
{
char buf[256];
unsigned long i;
struct stat statbuf;
buf[0] = '/';
for (i = 1; i < sizeof(buf); i++)
buf[i] = '_';
for (i = 0; 1; i++) {
sprintf(&buf[248], "%8lu", i);
stat(buf, &statbuf);
}
return 0;
}
This patch in combination with related indirectly reclaimable memory
patches closes this issue.
Link: http://lkml.kernel.org/r/20180313130041.8078-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I received a report about suspicious growth of unreclaimable slabs on
some machines. I've found that it happens on machines with low memory
pressure, and these unreclaimable slabs are external names attached to
dentries.
External names are allocated using generic kmalloc() function, so they
are accounted as unreclaimable. But they are held by dentries, which
are reclaimable, and they will be reclaimed under the memory pressure.
In particular, this breaks MemAvailable calculation, as it doesn't take
unreclaimable slabs into account. This leads to a silly situation, when
a machine is almost idle, has no memory pressure and therefore has a big
dentry cache. And the resulting MemAvailable is too low to start a new
workload.
To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is
used to track the amount of memory, consumed by external names. The
counter is increased in the dentry allocation path, if an external name
structure is allocated; and it's decreased in the dentry freeing path.
To reproduce the problem I've used the following Python script:
import os
for iter in range (0, 10000000):
try:
name = ("/some_long_name_%d" % iter) + "_" * 220
os.stat(name)
except Exception:
pass
This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.
This patch (of 3):
Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.
Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e. will
be released under memory pressure.
The counter is in bytes, as it's not always possible to count such
objects in pages. The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.
Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.
If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.
xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)
Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.
This problem occurs because the length of ACPI Buffer object is not
defined/initialized in the code before a corresponding ACPI method is
called. The obvious patch below fixes this issue.
Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru> Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru> Acked-by: Michael Brunner <Michael.Brunner@kontron.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when mprotect(2) gets used on DAX mappings. Also there is a wide variety
of other failures that can result from the missing _PAGE_DEVMAP flag
when the area gets used by get_user_pages() later.
Fix the problem by including _PAGE_DEVMAP in a set of flags that get
preserved by mprotect(2).
Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64") Cc: <stable@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()
So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).
Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.
Cc: <stable@vger.kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.
'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.
A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met. When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup. Unfortunately, this
propagation was missing leading to the following failure.
# cd /sys/fs/cgroup/unified
# cat cgroup.subtree_control # show that no controllers are enabled
* Moving the opencoded ->dom_cgrp save and restoration in
cgroup_enable_threaded() into cgroup_{save|restore}_control() so
that mulitple cgroups can be handled.
* Updating all threaded descendants' ->dom_cgrp to point to the new
dom_cgrp when enabling threaded mode.
The dm-linear target is independent of the dm-zoned target. For code
requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED
instead of CONFIG_DM_ZONED.
While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM
feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined.
Fixes: beb9caac211c1 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled") Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is best to avoid any extra overhead associated with bio completion.
DM core will indirectly call a DM target's .end_io if it is defined.
In the case of DM linear, there is no need to do so (for every bio that
completes) if CONFIG_DM_ZONED is not enabled.
Avoiding an extra indirect call for every bio completion is very
important for ensuring DM linear doesn't incur more overhead that
further widens the performance gap between dm-linear and raw block
devices.
Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If dm-linear or dm-flakey are layered on top of a partition of a zoned
block device, remapping of the start sector and write pointer position
of the zones reported by a report zones BIO must be modified to account
for the target table entry mapping (start offset within the device and
entry mapping with the dm device). If the target's backing device is a
partition of a whole disk, the start sector on the physical device of
the partition must also be accounted for when modifying the zone
information. However, dm_remap_zone_report() was not considering this
last case, resulting in incorrect zone information remapping with
targets using disk partitions.
Fix this by calculating the target backing device start sector using
the position of the completed report zones BIO and the unchanged
position and size of the original report zone BIO. With this value
calculated, the start sector and write pointer position of the target
zones can be correctly remapped.
Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target
after module __init resources created") inadvertently introduced this
bug when it moved dm_register_target() after the call to KMEM_CACHE().
Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created") Cc: stable@vger.kernel.org Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have two nested loops to check the entries within the pfn_array_table
arrays. But we mistakenly use the outer array as an index in our check,
and completely ignore the indexing performed by the inner loop.
With the "branches" export option, not all sample columns are exported.
However the unwanted columns are not at the end of the tuple, as assumed
by the code. Fix by taking the first 15 and last 3 values, instead of
the first 18.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180911114504.28516-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Occasional export failures were found to be caused by truncating 64-bit
pointers to 32-bits. Fix by explicitly setting types for all ctype
arguments and results.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180911114504.28516-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit ca460b3c9627 ("percpu: introduce bitmap metadata blocks")
introduced bitmap metadata blocks. These metadata blocks are allocated
whenever a new chunk is created, but they are never freed. Fix it.
On Sun Ultra 5, it happens that the dot clock is not set up properly for
some videomodes. For example, if we set the videomode "r1024x768x60" in
the firmware, Linux would incorrectly set a videomode with refresh rate
180Hz when booting (suprisingly, my LCD monitor can display it, although
display quality is very low).
The reason is this: Older mach64 cards set the divider in the register
VCLK_POST_DIV. The register has four 2-bit fields (the field that is
actually used is specified in the lowest two bits of the register
CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards,
there's another bit added - the top four bits of PLL_EXT_CNTL extend the
divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12".
The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets
them, so it can work regardless if the card supports them. However, the
sparc64 firmware may set these extended dividers during boot - and the
mach64 driver detects incorrect dot clock in this case.
This patch makes the driver read the additional divider bit from
PLL_EXT_CNTL and calculate the initial refresh rate properly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the legacy mmap layout, for example triggered using ulimit -s
unlimited, get_unmapped_area() fills memory from bottom to top starting
from a fairly low address near TASK_UNMAPPED_BASE.
This placement is suboptimal if the user application wishes to allocate
large amounts of heap memory using the brk syscall. With the VDSO being
located low in the user's virtual address space, the amount of space
available for access using brk is limited much more than it was prior to
the introduction of the VDSO.
Resolve this by adjusting STACK_TOP to reserve space for the VDSO &
providing an address hint to get_unmapped_area() causing it to use this
space even when using the legacy mmap layout.
We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64
bit systems respectively within which we randomize the VDSO base
address. Previously this randomization was taken care of by the mmap
base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB
sizes are somewhat arbitrary but chosen such that we have some
randomization without taking up too much of the user's virtual address
space, which is often in short supply for 32 bit systems.
With this the VDSO is always mapped at a high address, leaving lots of
space for statically linked programs to make use of brk:
7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the
VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding
entry in vmstat_text. This causes an out-of-bounds access in
vmstat_show().
Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which
is probably very rare.
Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com Fixes: 7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Kemi Wang <kemi.wang@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When VMX is used with flexpriority disabled (because of no support or
if disabled with module parameter) MMIO interface to lAPIC is still
available in x2APIC mode while it shouldn't be (kvm-unit-tests):
PASS: apic_disable: Local apic enabled in x2APIC mode
PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set
FAIL: apic_disable: *0xfee00030: 50014
The issue appears because we basically do nothing while switching to
x2APIC mode when APIC access page is not used. apic_mmio_{read,write}
only check if lAPIC is disabled before proceeding to actual write.
When APIC access is virtualized we correctly manipulate with VMX controls
in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes
in x2APIC mode so there's no issue.
Disabling MMIO interface seems to be easy. The question is: what do we
do with these reads and writes? If we add apic_x2apic_mode() check to
apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will
go to userspace. When lAPIC is in kernel, Qemu uses this interface to
inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This
somehow works with disabled lAPIC but when we're in xAPIC mode we will
get a real injected MSI from every write to lAPIC. Not good.
The simplest solution seems to be to just ignore writes to the region
and return ~0 for all reads when we're in x2APIC mode. This is what this
patch does. However, this approach is inconsistent with what currently
happens when flexpriority is enabled: we allocate APIC access page and
create KVM memory region so in x2APIC modes all reads and writes go to
this pre-allocated page which is, btw, the same for all vCPUs.
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.
This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.
This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.
When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.
There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.
This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or
128 unicast filter entries. (Table 7-8 MAC Address Registers from
databook) Fix dwmac1000_validate_ucast_entries() to accept values
between 1 and 32 in addition.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When netvsc device is removed it can call reschedule in RCU context.
This happens because canceling the subchannel setup work could (in theory)
cause a reschedule when manipulating the timer.
To reproduce, run with lockdep enabled kernel and unbind
a network device from hv_netvsc (via sysfs).
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.
We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.
Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.
Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / jedix / linux-maple.git / log