tests/qtest/virtio-scsi-test: add unmap large LBA with 4k blocks test

Add test for issue #345

Signed-off-by: Kit Westneat <kit.westneat@gmail.com>
Message-Id: <20210603142022.676395-1-kit.westneat@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Fix decode of cr8

A recent cleanup did not recognize that there are two ways
to encode cr8: one via the LOCK and the other via REX.

Fixes: 7eff2e7c
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/380
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210602035511.96834-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: tcg: fix switching from 16-bit to 32-bit tasks or vice versa

The format of the task state segment is governed by bit 3 in the
descriptor type field.  On a task switch, the format for saving
is given by the current value of TR's type field, while the
format for loading is given by the new descriptor.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: tcg: fix loading of registers from 16-bit TSS

According to the manual, the high 16-bit of the registers are preserved
when switching to a 16-bit task.  Implement this in switch_tss_ra.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: tcg: fix segment register offsets for 16-bit TSS

The TSS offsets in the manuals have only 2-byte slots for the
segment registers.  QEMU incorrectly uses 4-byte slots, so
that SS overlaps the LDT selector.

Resolves: #382
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

oslib-posix: Remove OpenBSD workaround for fcntl("/dev/null", F_SETFL, O_NONBLOCK) failure

OpenBSD prior to 6.3 required a workaround to utilize fcntl(F_SETFL) on memory
devices.

Since modern verions of OpenBSD that are only officialy supported and buildable
on do not have this issue I am garbage collecting this workaround.

Signed-off-by: Brad Smith <brad@comstyle.com>
Message-Id: <YGYECGXQhdamEJgC@humpty.home.comstyle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

iscsi: link libm into the module

Depending on the configuration of QEMU, some binaries might not need libm
at all.  In that case libiscsi, which uses exp(), will fail to load.
Link it in the module explicitly.

Reported-by: Yi Sun <yisun@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: allow optional dependencies for block modules

Right now all dependencies for block modules are passed to
module_ss.add(when: ...), so they are mandatory.  In the next patch we
will need to add a libm dependency to a module, but libm does not exist
on all systems.  So, modify the creation of module_ss and modsrc so that
dependencies can also be passed to module_ss.add(if_true: ...).

While touching the array, remove the useless dependency of the curl
module on glib.  glib is always linked in QEMU and in fact all other
block modules also need it, but they don't have to specify it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-fpu-20210603' into staging

Finish conversion of float128 and floatx80 to FloatParts.
Implement float128_muladd and float128_{min,max}*.
Optimize int-to-float conversion with hard-float.

# gpg: Signature made Thu 03 Jun 2021 22:13:10 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-fpu-20210603: (29 commits)
  softfloat: Use hard-float for {u}int64_to_float{32,64}
  tests/fp: Enable more tests
  softfloat: Convert modrem operations to FloatParts
  softfloat: Move floatN_log2 to softfloat-parts.c.inc
  softfloat: Convert float32_exp2 to FloatParts
  softfloat: Convert floatx80 compare to FloatParts
  softfloat: Convert floatx80_scalbn to FloatParts
  softfloat: Convert floatx80 to integer to FloatParts
  softfloat: Convert floatx80 float conversions to FloatParts
  softfloat: Convert integer to floatx80 to FloatParts
  softfloat: Convert floatx80_round_to_int to FloatParts
  softfloat: Convert floatx80_round to FloatParts
  softfloat: Convert floatx80_sqrt to FloatParts
  softfloat: Convert floatx80_div to FloatParts
  softfloat: Convert floatx80_mul to FloatParts
  softfloat: Convert floatx80_add/sub to FloatParts
  tests/fp/fp-test: Reverse order of floatx80 precision tests
  softfloat: Adjust parts_uncanon_normal for floatx80
  softfloat: Introduce Floatx80RoundPrec
  softfloat: Reduce FloatFmt
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

softfloat: Use hard-float for {u}int64_to_float{32,64}

For the normal case of no additional scaling, this reduces the
profile contribution of int64_to_float64 to the testcase in the
linked issue from 0.81% to 0.04%.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/134
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/fp: Enable more tests

Fix the trivial typo in extF80_lt_quiet, and re-enable
all of the floatx80 tests that are now fixed.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <87bl9iyahr.fsf@linaro.org>
[rth: Squash the fix for lt_quiet, and enable that too.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert modrem operations to FloatParts

Rename to parts$N_modrem.  This was the last use of a lot
of the legacy infrastructure, so remove it as required.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move floatN_log2 to softfloat-parts.c.inc

Rename to parts$N_log2.  Though this is partly a ruse, since I do not
believe the code will succeed for float128 without work.  Which is ok
for now, because we do not need this for more than float32 and float64.

Since berkeley-testfloat-3 doesn't support log2, compare float64_log2
vs the system log2.  Fix the errors for inputs near 1.0:

test: 3ff00000000000b0  +0x1.00000000000b0p+0
  sf: 3d2fa00000000000  +0x1.fa00000000000p-45
libm: 3d2fbd422b1bd36f  +0x1.fbd422b1bd36fp-45
Error in fraction: 32170028290927 ulp

test: 3feec24f6770b100  +0x1.ec24f6770b100p-1
  sf: bfad3740d13c9ec0  -0x1.d3740d13c9ec0p-5
libm: bfad3740d13c9e98  -0x1.d3740d13c9e98p-5
Error in fraction: 40 ulp

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert float32_exp2 to FloatParts

Keep the intermediate results in FloatParts instead of
converting back and forth between float64.  Use muladd
instead of separate mul+add.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80 compare to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_scalbn to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80 to integer to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80 float conversions to FloatParts

This is the last use of commonNaNT and all of the routines
that use it, so remove all of them for Werror.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert integer to floatx80 to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_round_to_int to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_round to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_sqrt to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_div to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_mul to FloatParts

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Convert floatx80_add/sub to FloatParts

Since this is the first such, this includes all of the
packing and unpacking routines as well.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tests/fp/fp-test: Reverse order of floatx80 precision tests

Many qemu softfloat will check floatx80_rounding_precision
even when berkeley testfloat will not.  So begin with
floatx80_precision_x, so that's the one we use
when !FUNC_EFF_ROUNDINGPRECISION.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Adjust parts_uncanon_normal for floatx80

With floatx80_precision_x, the rounding happens across
the break between words.  Notice this case with

  frac_lsb = round_mask + 1 -> 0

and check the bits in frac_hi as needed.

In addition, since frac_shift == 0, we won't implicitly clear
round_mask via the right-shift, so explicitly clear those bits.
This fixes rounding for floatx80_precision_[sd].

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Introduce Floatx80RoundPrec

Use an enumeration instead of raw 32/64/80 values.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Reduce FloatFmt

Remove frac_lsb, frac_lsbm1, roundeven_mask.  Compute
these from round_mask in parts$N_uncanon_normal.

With floatx80, round_mask will not be tied to frac_shift.
Everything else is easily computable.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Split out parts_uncanon_normal

We will need to treat the non-normal cases of floatx80 specially,
so split out the normal case that we can reuse.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move sqrt_float to softfloat-parts.c.inc

Rename to parts$N_sqrt.
Reimplement float128_sqrt with FloatParts128.

Reimplement with the inverse sqrt newton-raphson algorithm from musl.
This is significantly faster than even the berkeley sqrt n-r algorithm,
because it does not use division instructions, only multiplication.

Ordinarily, changing algorithms at the same time as migrating code is
a bad idea, but this is the only way I found that didn't break one of
the routines at the same time.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move scalbn_decomposed to softfloat-parts.c.inc

Rename to parts$N_scalbn.
Reimplement float128_scalbn with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move compare_floats to softfloat-parts.c.inc

Rename to parts$N_compare.  Rename all of the intermediate
functions to ftype_do_compare.  Rename the hard-float functions
to ftype_hs_compare.  Convert float128 to FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Implement float128_(min|minnum|minnummag|max|maxnum|maxnummag)

The float128 implementation is straight-forward.
Unfortuantely, we don't have any tests we can simply adjust/unlock.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210517142739.38597-24-david@redhat.com>
[rth: Update for changed parts_minmax return value]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move minmax_flags to softfloat-parts.c.inc

Rename to parts$N_minmax.  Combine 3 bool arguments to a bitmask.
Introduce ftype_minmax functions as a common optimization point.
Fold bfloat16 expansions into the same macro as the other types.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move uint_to_float to softfloat-parts.c.inc

Rename to parts$N_uint_to_float.
Reimplement uint64_to_float128 with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move int_to_float to softfloat-parts.c.inc

Rename to parts$N_sint_to_float.
Reimplement int{32,64}_to_float128 with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

softfloat: Move round_to_uint_and_pack to softfloat-parts.c.inc

Rename to parts$N_float_to_uint.  Reimplement
float128_to_uint{32,64}{_round_to_zero} with FloatParts128.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210603' into staging

target-arm queue:
 * Some not-yet-enabled preliminaries for M-profile MVE support
 * Consistently use "Cortex-Axx", not "Cortex Axx" in docs, comments
 * docs: Fix installation of man pages with Sphinx 4.x
 * Mark LDS{MIN,MAX} as signed operations
 * Fix missing syndrome value for DAIF and PAC check exceptions
 * Implement BFloat16 extensions
 * Refactoring of hvf accelerator code in preparation for aarch64 support
 * Fix some coverity nits in test code

# gpg: Signature made Thu 03 Jun 2021 16:58:02 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210603: (45 commits)
  tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed
  tests/qtest/tpm-tests: Remove unnecessary NULL checks
  tests/qtest/pflash-cfi02-test: Avoid potential integer overflow
  tests/qtest/hd-geo-test: Fix checks on mkstemp() return value
  tests/qtest/e1000e-test: Check qemu_recv() succeeded
  tests/qtest/bios-tables-test: Check for dup2() failure
  hvf: Simplify post reset/init/loadvm hooks
  hvf: Introduce hvf vcpu struct
  hvf: Remove hvf-accel-ops.h
  hvf: Make synchronize functions static
  hvf: Use cpu_synchronize_state()
  hvf: Split out common code on vcpu init and destroy
  hvf: Remove use of hv_uvaddr_t and hv_gpaddr_t
  hvf: Make hvf_set_phys_mem() static
  hvf: Move hvf internal definitions into common header
  hvf: Move cpu functions into common directory
  hvf: Move vcpu thread functions into common directory
  hvf: Move assert_hvf_ok() into common directory
  target/arm: Enable BFloat16 extensions
  linux-user/aarch64: Enable hwcap bits for bfloat16
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed

Coverity complains that we don't check for failures from dup()
and mkstemp(); add asserts that these syscalls succeeded.

Fixes: Coverity CID 1432516, 1432574
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210525134458.6675-7-peter.maydell@linaro.org

tests/qtest/tpm-tests: Remove unnecessary NULL checks

Coverity points out that in tpm_test_swtpm_migration_test() we
assume that src_tpm_addr and dst_tpm_addr are non-NULL (we
pass them to tpm_util_migration_start_qemu() which will
unconditionally dereference them) but then later explicitly
check them for NULL. Remove the pointless checks.

Fixes: Coverity CID 1432367, 1432359
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-6-peter.maydell@linaro.org

tests/qtest/pflash-cfi02-test: Avoid potential integer overflow

Coverity points out that we calculate a 64-bit value using 32-bit
arithmetic; add the cast to force the multiply to be done as 64-bits.
(The overflow will never happen with the current test data.)

Fixes: Coverity CID 1432320
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-5-peter.maydell@linaro.org

tests/qtest/hd-geo-test: Fix checks on mkstemp() return value

Coverity notices that the checks against mkstemp() failing in
create_qcow2_with_mbr() are wrong: mkstemp returns -1 on failure but
the check is just "g_assert(fd)".  Fix to use "g_assert(fd >= 0)",
matching the correct check in create_test_img().

Fixes: Coverity CID 1432274
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-4-peter.maydell@linaro.org

tests/qtest/e1000e-test: Check qemu_recv() succeeded

The e1000e_send_verify() test calls qemu_recv() but doesn't
check that the call succeeded, which annoys Coverity. Add
an explicit test check for the length of the data.

(This is a test check, not a "we assume this syscall always
succeeds", so we use g_assert_cmpint() rather than g_assert().)

Fixes: Coverity CID 1432324
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-3-peter.maydell@linaro.org

tests/qtest/bios-tables-test: Check for dup2() failure

Coverity notes that we don't check for dup2() failing.  Add some
assertions so that if it does ever happen we get some indication.
(This is similar to how we handle other "don't expect this syscall to
fail" checks in this test code.)

Fixes: Coverity CID 1432346
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-2-peter.maydell@linaro.org

hvf: Simplify post reset/init/loadvm hooks

The hooks we have that call us after reset, init and loadvm really all
just want to say "The reference of all register state is in the QEMU
vcpu struct, please push it".

We already have a working pushing mechanism though called cpu->vcpu_dirty,
so we can just reuse that for all of the above, syncing state properly the
next time we actually execute a vCPU.

This fixes PSCI resets on ARM, as they modify CPU state even after the
post init call has completed, but before we execute the vCPU again.

To also make the scheme work for x86, we have to make sure we don't
move stale eflags into our env when the vcpu state is dirty.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-13-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Introduce hvf vcpu struct

We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Remove hvf-accel-ops.h

We can move the definition of hvf_vcpu_exec() into our internal
hvf header, obsoleting the need for hvf-accel-ops.h.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-11-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Make synchronize functions static

The hvf accel synchronize functions are only used as input for local
callback functions, so we can make them static.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-10-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Use cpu_synchronize_state()

There is no reason to call the hvf specific hvf_cpu_synchronize_state()
when we can just use the generic cpu_synchronize_state() instead. This
allows us to have less dependency on internal function definitions and
allows us to make hvf_cpu_synchronize_state() static.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-9-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Split out common code on vcpu init and destroy

Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.

This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Remove use of hv_uvaddr_t and hv_gpaddr_t

The ARM version of Hypervisor.framework no longer defines these two
types, so let's just revert to standard ones.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-7-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Make hvf_set_phys_mem() static

The hvf_set_phys_mem() function is only called within the same file.
Make it static.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-6-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Move hvf internal definitions into common header

Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.

This patch moves a few internal struct and constant defines over.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-5-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Move cpu functions into common directory

Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.

This patch moves CPU and memory operations over. While at it, make sure
the code is consumable on non-i386 systems.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-4-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Move vcpu thread functions into common directory

Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.

This patch moves the vCPU thread loop over.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-3-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hvf: Move assert_hvf_ok() into common directory

Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.

This patch moves assert_hvf_ok() and introduces generic build infrastructure.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable BFloat16 extensions

Disable BF16 again for !have_neon and !have_vfp during realize.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

linux-user/aarch64: Enable hwcap bits for bfloat16

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement bfloat widening fma (indexed)

This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement bfloat widening fma (vector)

This is BFMLAL{B,T} for both AArch64 AdvSIMD and SVE,
and VFMA{B,T}.BF16 for AArch32 NEON.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement bfloat16 matrix multiply accumulate

This is BFMMLA for both AArch64 AdvSIMD and SVE,
and VMMLA.BF16 for AArch32 NEON.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement bfloat16 dot product (indexed)

This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement bfloat16 dot product (vector)

This is BFDOT for both AArch64 AdvSIMD and SVE,
and VDOT.BF16 for AArch32 NEON.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

softfpu: Add float_round_to_odd_inf

For Arm BFDOT and BFMMLA, we need a version of round-to-odd
that overflows to infinity, instead of the max normal number.

Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement vector float32 to bfloat16 conversion

This is BFCVT{N,T} for both AArch64 AdvSIMD and SVE,
and VCVT.BF16.F32 for AArch32 NEON.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement scalar float32 to bfloat16 conversion

This is the 64-bit BFCVT and the 32-bit VCVT{B,T}.BF16.F32.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Unify unallocated path in disas_fp_1src

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add isar_feature_{aa32, aa64, aa64_sve}_bf16

Note that the SVE BFLOAT16 support does not require SVE2,
it is an independent extension.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: use raise_exception_ra for stack limit exception

The sequence cpu_restore_state() + raise_exception() is equivalent to
raise_exception_ra(), so use that instead.  (In this case we never
cared about the syndrome value, because M-profile doesn't use the
syndrome; the old code was just written unnecessarily awkwardly.)

Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Retain edited version of comment; rewrite commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: use raise_exception_ra for MTE check failure

Now that raise_exception_ra restores the state before raising the
exception we can use restore_exception_ra to perform the state restore +
exception raising without clobbering the syndrome.

Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: Keep the one line of the comment that is still relevant]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: fold do_raise_exception into raise_exception

Now that there are no other users of do_raise_exception, fold it into
raise_exception.

Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: fix missing exception class

The DAIF and PAC checks used raise_exception_ra to raise an exception
and unwind CPU state but raise_exception_ra is currently designed for
handling data aborts as the syndrome is partially precomputed and
encoded in the TB and then merged in merge_syn_data_abort when handling
the data abort.  Using raise_exception_ra for DAIF and PAC checks
results in an empty syndrome being retrieved from data[2] in
restore_state_to_opc and setting ESR to 0.  This manifested as:

  kvm [571]: Unknown exception class: esr: 0x000000 –
  Unknown/Uncategorized

when launching a KVM guest when the host qemu used a CPU supporting
EL2+pointer authentication and enabling pointer authentication in the
guest.

Rework raise_exception_ra such that the state is restored before raising
the exception so that the exception is not clobbered by
restore_state_to_opc.

Fixes: 0d43e1a2d29a ("target/arm: Add PAuth helpers")
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[PMM: added comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Mark LDS{MIN,MAX} as signed operations

The operands to tcg_gen_atomic_fetch_s{min,max}_i64 must
be signed, so that the inputs are properly extended.
Zero extend the result afterward, as needed.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/364
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210602020720.47679-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs: Fix installation of man pages with Sphinx 4.x

The 4.x branch of Sphinx introduces a breaking change, as generated man
pages are now written to subdirectories corresponding to the manual
section they belong to. This results in `make install` erroring out when
attempting to install the man pages, because they are not where it
expects to find them.

This patch restores the behavior of Sphinx 3.x regarding man pages.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/256
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Message-id: 20210503161422.15028-1-dgouttegattat@incenp.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: Consistently use "Cortex-Axx", not "Cortex Axx"

The official punctuation for Arm CPU names uses a hyphen, like
"Cortex-A9". We mostly follow this, but in a few places usage
without the hyphen has crept in. Fix those so we consistently
use the same way of writing the CPU name.

This commit was created with:
  git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210527095152.10968-1-peter.maydell@linaro.org

target/arm: Allow board models to specify initial NS VTOR

Currently we allow board models to specify the initial value of the
Secure VTOR register, using an init-svtor property on the TYPE_ARMV7M
object which is plumbed through to the CPU.  Allow board models to
also specify the initial value of the Non-secure VTOR via a similar
init-nsvtor property.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-10-peter.maydell@linaro.org

target/arm: Make FPSCR.LTPSIZE writable for MVE

The M-profile FPSCR has an LTPSIZE field, but if MVE is not
implemented it is read-only and always reads as 4; this is how QEMU
currently handles it.

Make the field writable when MVE is implemented.

We can safely add the field to the MVE migration struct because
currently no CPUs enable MVE and so the migration struct is never
used.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-8-peter.maydell@linaro.org

target/arm: Implement M-profile VPR register

If MVE is implemented for an M-profile CPU then it has a VPR
register, which tracks predication information.

Implement the read and write handling of this register, and
the migration of its state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-7-peter.maydell@linaro.org

target/arm: Fix return values in fp_sysreg_checks()

The fp_sysreg_checks() function is supposed to be returning an
FPSysRegCheckResult, which is an enum with three possible values.
However, three places in the function "return false" (a hangover from
a previous iteration of the design where the function just returned a
bool).  Make these return FPSysRegCheckFailed instead (for no
functional change, since both false and FPSysRegCheckFailed are
zero).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-6-peter.maydell@linaro.org

target/arm: Add MVE check to VMOV_reg_sp and VMOV_reg_dp

Split out the handling of VMOV_reg_sp and VMOV_reg_dp so that we can
permit the insns if either FP or MVE are present.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-5-peter.maydell@linaro.org

target/arm: Move fpsp/fpdp isar check into callers of do_vfp_2op_sp/dp

The do_vfp_2op_sp() and do_vfp_2op_dp() functions currently check
whether floating point is supported via the aa32_fpdp_v2 and
aa32_fpsp_v2 isar checks.  For v8.1M MVE support, the VMOV_reg trans
functions (but not any of the others) need to update this to also
allow the insn if MVE is implemented.  Move the check out of the do_
function and into its callsites (which are all implemented via the
DO_VFP_2OP macro), so we have a place to change the check for the
VMOV insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-4-peter.maydell@linaro.org

target/arm: Update feature checks for insns which are "MVE or FP"

Some v8M instructions are present if either the floating point
extension or MVE is implemented.  Update our implementation of them
to check for MVE as well as for FP.

This is all the insns which use CheckDecodeFaults(ExtType_MveOrFp) or
CheckDecodeFaults(ExtType_MveOrDpFp) in their pseudocode, which are
essentially the loads and stores, moves and sysreg accesses, except
for VMOV_reg_sp and VMOV_reg_dp, which we handle in subsequent
patches because they need a refactor to provide a place to put the
new MVE check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-3-peter.maydell@linaro.org

target/arm: Add isar feature check functions for MVE

Add the isar feature check functions we will need for v8.1M MVE:
 * a check for MVE present: this corresponds to the pseudocode's
   CheckDecodeFaults(ExtType_Mve)
 * a check for the optional floating-point part of MVE: this
   corresponds to CheckDecodeFaults(ExtType_MveFp)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210520152840.24453-2-peter.maydell@linaro.org

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210603' into staging

ppc patch queue 2021-06-03

Next batch of ppc target patches.  Highlights are:
 * A fix for a regression with single-step mode
 * Start of moving ppc to use decodetree
 * Implementation of some POWER10 64-bit prefixed instructions
 * Several cleanups to softmmu code
 * Continued progress towards allowing --disable-tcg
 * Fix for the POWER PEF implementation
 * Fix for LPCR handling of hotplugged CPUs
 * Assorted other bugfixes and cleanups

This patchset does contain a couple of changes to code outside my
normal scope of maintainership, related to the removal of cpu_dump and
cpu_statistics hooks.  ppc was the last target arch implementing these
at all, and they didn't really do anything there either.  The patches
should have relevant acks.

# gpg: Signature made Thu 03 Jun 2021 09:20:59 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210603: (42 commits)
  target/ppc: fix single-step exception regression
  target/ppc: Move cmp/cmpi/cmpl/cmpli to decodetree
  target/ppc: Move addpcis to decodetree
  target/ppc: Implement vcfuged instruction
  target/ppc: Implement cfuged instruction
  target/ppc: Implement setbc/setbcr/stnbc/setnbcr instructions
  target/ppc: Implement prefixed integer store instructions
  target/ppc: Move D/DS/X-form integer stores to decodetree
  target/ppc: Implement prefixed integer load instructions
  target/ppc: Move D/DS/X-form integer loads to decodetree
  target/ppc: Implement PNOP
  target/ppc: Move ADDI, ADDIS to decodetree, implement PADDI
  target/ppc: Add infrastructure for prefixed insns
  target/ppc: Move page crossing check to ppc_tr_translate_insn
  target/ppc: Introduce macros to check isa extensions
  target/ppc: powerpc_excp: Consolidade TLB miss code
  target/ppc: powerpc_excp: Remove dump_syscall_vectored
  target/ppc: powerpc_excp: Move lpes code to where it is used
  target/ppc: overhauled and moved logic of storing fpscr
  target/ppc: removed all mentions to PPC_DUMP_CPU
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/ppc: fix single-step exception regression

Commit 6086c75 (target/ppc: Replace POWERPC_EXCP_BRANCH with
DISAS_NORETURN) broke the generation of exceptions when
CPU_SINGLE_STEP or CPU_BRANCH_STEP were set, due to nip always being
reset to the address of the current instruction.
This fix leaves nip untouched when generating the exception.

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reported-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210602125103.332793-1-luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move cmp/cmpi/cmpl/cmpli to decodetree

Additionally, REQUIRE_64BIT when L=1 to match what is specified in The
Programming Environments Manual:

"For 32-bit implementations, the L field must be cleared, otherwise the
instruction form is invalid."

Some CPUs are known to deviate from this specification by ignoring the
L bit [1]. The stricter behavior, however, can help users that test
software with qemu, making it more likely to detect bugs that would
otherwise be silent.

If deemed necessary, a future patch can adapt this behavior based on
the specific CPU model.

[1] The 601 manual is the only one I've found that explicitly states
that the L bit is ignored, but we also observe this behavior in a 7447A
v1.2.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-15-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[dwg: Corrected whitespace error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move addpcis to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-14-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement vcfuged instruction

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-13-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement cfuged instruction

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-12-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement setbc/setbcr/stnbc/setnbcr instructions

Implements the following PowerISA v3.1 instructions:
setbc: Set Boolean Condition
setbcr: Set Boolean Condition Reverse
setnbc: Set Negative Boolean Condition
setnbcr: Set Negative Boolean Condition Reverse

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-11-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement prefixed integer store instructions

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-10-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move D/DS/X-form integer stores to decodetree

These are all connected by macros in the legacy decoding.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-9-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement prefixed integer load instructions

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-8-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move D/DS/X-form integer loads to decodetree

These are all connected by macros in the legacy decoding.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-7-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Implement PNOP

The illegal suffix behavior matches what was observed in a
POWER10 DD2.0 machine.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-6-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move ADDI, ADDIS to decodetree, implement PADDI

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-5-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Add infrastructure for prefixed insns

Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Move page crossing check to ppc_tr_translate_insn

With prefixed instructions, the number of instructions
remaining until the page crossing is no longer constant.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

target/ppc: Introduce macros to check isa extensions

These will be used by the decodetree trans_* functions
to early-exit when the instruction set is not enabled.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>