Niklas Neronin [Thu, 6 Mar 2025 14:49:48 +0000 (16:49 +0200)]
usb: xhci: set page size to the xHCI-supported size
The current xHCI driver does not validate whether a page size of 4096
bytes is supported. Address the issue by setting the page size to the
value supported by the xHCI controller, as read from the Page Size
register. In the event of an unexpected value; default to a 4K page size.
Additionally, this commit removes unnecessary debug messages and instead
prints the supported and used page size once.
The xHCI controller supports page sizes of (2^{(n+12)}) bytes, where 'n'
is the Page Size Bit. Only one page size is supported, with a maximum
page size of 128 KB.
The ffs() function returns the index of the first set bit, starting from 1.
If no bits are set, it returns zero. This behavior causes an off-by-one
page size in the debug message, as the page size calculation [1]
is zero-based, while ffs() is one-based.
Fix this by subtracting one from the result of ffs(). Note that since
variable 'val' is unsigned, subtracting one from zero will result in the
maximum unsigned integer value. Consequently, the condition 'if (val < 16)'
will still function correctly.
[1], Page size: (2^(n+12)), where 'n' is the set page size bit.
Michal Pecio [Thu, 6 Mar 2025 14:49:46 +0000 (16:49 +0200)]
usb: xhci: Skip only one TD on Ring Underrun/Overrun
If skipping is deferred to events other than Missed Service Error itsef,
it means we are running on an xHCI 1.0 host and don't know how many TDs
were missed until we reach some ordinary transfer completion event.
And in case of ring xrun, we can't know where the xrun happened either.
If we skip all pending TDs, we may prematurely give back TDs added after
the xrun had occurred, risking data loss or buffer UAF by the xHC.
If we skip none, a driver may become confused and stop working when all
its URBs are missed and appear to be "in flight" forever.
Skip exactly one TD on each xrun event - the first one that was missed,
as we can now be sure that the HC has finished processing it. Provided
that one more TD is queued before any subsequent doorbell ring, it will
become safe to skip another TD by the time we get an xrun again.
Michal Pecio [Thu, 6 Mar 2025 14:49:45 +0000 (16:49 +0200)]
usb: xhci: Expedite skipping missed isoch TDs on modern HCs
xHCI spec rev. 1.0 allowed the TRB pointer of Missed Service events
to be NULL. Having no idea which of the queued TDs were missed and
which are waiting, we can only set a flag to skip missed TDs later.
But HCs are also allowed to give us pointer to the last missed TRB,
and this became mandatory in spec rev. 1.1 and later.
Use this pointer, if available, to immediately skip all missed TDs.
This reduces latency and risk of skipping-related bugs, because we
can now leave the skip flag cleared for future events.
Handle Missed Service Error events as 'error mid TD', if applicable,
because rev. 1.0 spec excplicitly says so in notes to 4.10.3.2 and
later revs in 4.10.3.2 and 4.11.2.5.2. Notes to 4.9.1 seem to apply.
Tested on ASM1142 and ASM3142 v1.1 xHCs which provide TRB pointers.
Tested on AMD, Etron, Renesas v1.0 xHCs which provide TRB pointers.
Tested on NEC v0.96 and VIA v1.0 xHCs which send a NULL pointer.
Change inspired by a discussion about realtime USB audio.
Michal Pecio [Thu, 6 Mar 2025 14:49:44 +0000 (16:49 +0200)]
usb: xhci: Fix isochronous Ring Underrun/Overrun event handling
The TRB pointer of these events points at enqueue at the time of error
occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we
are handling the event, a new TD may be queued at this ring position.
I can trigger this race by rising interrupt moderation to increase IRQ
handling delay. Similar delay may occur naturally due to system load.
If this ever happens after a Missed Service Error, missed TDs will be
skipped and the new TD processed as if it matched the event. It could
be given back prematurely, risking data loss or buffer UAF by the xHC.
Don't complete TDs on xrun events and don't warn if queued TDs don't
match the event's TRB pointer, which can be NULL or a link/no-op TRB.
Don't warn if there are no queued TDs at all.
Now that it's safe, also handle xrun events if the skip flag is clear.
This ensures completion of any TD stuck in 'error mid TD' state right
before the xrun event, which could happen if a driver submits a finite
number of URBs to a buggy HC and then an error occurs on the last TD.
Michal Pecio [Thu, 6 Mar 2025 14:49:43 +0000 (16:49 +0200)]
usb: xhci: Complete 'error mid TD' transfers when handling Missed Service
Missed Service Error after an error mid TD means that the failed TD has
already been passed by the xHC without acknowledgment of the final TRB,
a known hardware bug. So don't wait any more and give back the TD.
Reproduced on NEC uPD720200 under conditions of ludicrously bad USB link
quality, confirmed to behave as expected using dynamic debug.
Michal Pecio [Thu, 6 Mar 2025 14:49:42 +0000 (16:49 +0200)]
usb: xhci: Don't skip on Stopped - Length Invalid
Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab142, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years.
Fixes: d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250306144954.3507700-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Neronin [Thu, 6 Mar 2025 14:49:41 +0000 (16:49 +0200)]
usb: xhci: remove redundant update_ring_for_set_deq_completion() function
The function is a remnant from a previous implementation and is now
redundant. There is no longer a need to search for the dequeue pointer,
as both the TRB and segment dequeue pointers are saved within
'queued_deq_seg' and 'queued_deq_ptr'.
Kaustabh Chakraborty [Fri, 28 Feb 2025 19:40:34 +0000 (01:10 +0530)]
usb: dwc3: exynos: add support for exynos7870
Exynos7870 devices have a DWC3 compatible USB 2.0 controller.
Add support in the driver by:
- Adding its own compatible string, "samsung,exynos7870-dwusb3".
- Adding three USBDRD clocks named "bus_early", "ref", and "ctrl", to
be controlled by the driver.
Kaustabh Chakraborty [Fri, 28 Feb 2025 19:40:33 +0000 (01:10 +0530)]
dt-bindings: usb: samsung,exynos-dwc3: add exynos7870 support
Document compatible string for Exynos7870 DWC3-compatible USB 2.0
driver. The devicetree node requires three clocks, named "bus_early",
"ref", and "ctrl".
Unlike other variants, Exynos7870's USB controller requires a single
3.0V regulator. Assert that the other 1.0V regulator requirement is
enforced on variants individually other than Exynos7870's.
Mario Limonciello [Fri, 21 Feb 2025 05:40:03 +0000 (23:40 -0600)]
ucsi_ccg: Don't show failed to get FW build information error
The error `failed to get FW build information` is added for what looks
to be for misdetection of the device property firmware-name.
If the property is missing (such as on non-nvidia HW) this error shows up.
Move the error into the scope of the property parser for "firmware-name"
to avoid showing errors on systems without the firmware-name property.
AngeloGioacchino Del Regno [Wed, 19 Feb 2025 14:01:43 +0000 (15:01 +0100)]
dt-bindings: usb: richtek,rt1711h: Add missing vbus power supply
The RichTek RT1711H and RT1719 chips do have a vbus pin that is
used for attach/detach detection (respectively, pin A1 and 11):
allow a vbus-supply phandle for that.
Stefan Eichenberger [Wed, 19 Feb 2025 08:36:44 +0000 (09:36 +0100)]
usb: core: replace usb_sndaddr0pipe macro with usb_sndctrlpipe
The usb_sndaddr0pipe macro is only used in the hub_set_address function.
Replace it with usb_sndctrlpipe which provides the same functionality
but would also consider the endpoint device number.
If the device has not been initialised, it is safe to use
usb_sndctrlpipe in this context because udev->devnum is set to 0.
Therefore, this change does not affect behaviour, but reduces code
complexity by reusing the existing macro.
Kannappan R [Thu, 20 Feb 2025 14:13:39 +0000 (16:13 +0200)]
USB: core: Add eUSB2 descriptor and parsing in USB core
Add support for the 'eUSB2 Isochronous Endpoint Companion Descriptor'
introduced in the recent USB 2.0 specification 'USB 2.0 Double Isochronous
IN Bandwidth' ECN.
It allows embedded USB2 (eUSB2) devices to report and use higher bandwidths
for isochronous IN transfers in order to support higher camera resolutions
on the lid of laptops and tablets with minimal change to the USB2 protocol.
The motivation for expanding USB 2.0 is further clarified in an additional
Embedded USB2 version 2.0 (eUSB2v2) supplement to the USB 2.0
specification. It points out this is optimized for performance, power and
cost by using the USB 2.0 low-voltage, power efficient PHY and half-duplex
link for the asymmetric camera bandwidth needs, avoiding the costly and
complex full-duplex USB 3.x symmetric link and gigabit receivers.
eUSB2 devices that support the higher isochronous IN bandwidth and the new
descriptor can be identified by their device descriptor bcdUSB value of
0x0220
Co-developed-by: Amardeep Rai <amardeep.rai@intel.com> Signed-off-by: Amardeep Rai <amardeep.rai@intel.com> Signed-off-by: Kannappan R <r.kannappan@intel.com> Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250220141339.1939448-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate errors to the consumers when configuring the retimer so that
they can act on any failures as intended, for example:
ps883x_retimer 2-0008: failed to write conn_status_0: -5
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to setup retimer to DP: -5
Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250218152933.22992-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that the retimer is accessible before registering to avoid
having later consumer calls fail to configure it, something which, for
example, can lead to a hotplugged display not being recognised:
Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250218152933.22992-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 18 Feb 2025 15:29:31 +0000 (16:29 +0100)]
usb: typec: ps883x: fix registration race
Make sure that the retimer is fully setup before registering it to avoid
having consumers try to access it while it is being reset.
Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250218152933.22992-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 18 Feb 2025 08:22:43 +0000 (09:22 +0100)]
usb: typec: ps883x: fix probe error handling
Fix the probe error handling to avoid unbalanced clock disable or
leaving regulators on after probe failure.
Note that the active-low reset pin should also be asserted to avoid
leaking current after disabling the regulators.
Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20250218082243.9318-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 17 Feb 2025 13:41:32 +0000 (14:41 +0100)]
usb: dwc2: Implement recovery after PM domain off
According to the dt-bindings there are some platforms, which have a
dedicated USB power domain for DWC2 IP core supply. If the power domain
is switched off during system suspend then all USB register will lose
their settings.
Use GUSBCFG_TOUTCAL as a canary to detect that the power domain has
been powered off during suspend. Since the GOTGCTL_CURMODE_HOST doesn't
match on all platform with the current mode, additionally backup
GINTSTS. This works reliable to decide which registers should be
restored.
Stefan Wahren [Mon, 17 Feb 2025 13:41:31 +0000 (14:41 +0100)]
usb: dwc2: Refactor backup/restore of registers
The DWC2 runtime PM code reuses similar patterns to backup and
restore the registers. So consolidate them in USB mode specific
variants. This also has the advantage it is reusable for further
PM improvements.
Special care is taken for DCFG register during device mode restore.
dwc2_restore_device_registers() use a single boolean
to decide about the register restoring behavior.
So replace this with a flags parameter, which can
be extended later.
Catalin Popescu [Thu, 13 Feb 2025 09:43:38 +0000 (10:43 +0100)]
usb: misc: onboard_dev: add vdda support for Microchip USB2514
This hub is powered by digital and analog 3V3 power rails, so provide
the possibility to use different regulators for digital (vdd) and analog
(vdda) power rails.
Linus Torvalds [Sun, 16 Feb 2025 20:58:51 +0000 (12:58 -0800)]
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Linus Torvalds [Sun, 16 Feb 2025 20:54:42 +0000 (12:54 -0800)]
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Linus Torvalds [Sun, 16 Feb 2025 19:15:50 +0000 (11:15 -0800)]
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
Linus Torvalds [Sun, 16 Feb 2025 18:41:50 +0000 (10:41 -0800)]
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
Linus Torvalds [Sun, 16 Feb 2025 18:25:12 +0000 (10:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
Linus Torvalds [Sun, 16 Feb 2025 18:19:41 +0000 (10:19 -0800)]
Merge tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
Linus Torvalds [Sun, 16 Feb 2025 01:14:53 +0000 (17:14 -0800)]
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
Linus Torvalds [Sun, 16 Feb 2025 00:34:41 +0000 (16:34 -0800)]
Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
Steven Rostedt [Fri, 14 Feb 2025 17:35:12 +0000 (12:35 -0500)]
ring-buffer: Update pages_touched to reflect persistent buffer content
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sat, 15 Feb 2025 18:20:47 +0000 (10:20 -0800)]
Merge tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
Linus Torvalds [Sat, 15 Feb 2025 18:15:24 +0000 (10:15 -0800)]
Merge tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix isolated VFs handling by verifying that a VF’s parent PF is
locally owned before registering it in an existing PCI domain
- Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to
workaround gcc failure in handling __builtin_constant_p() in this
case
- Fix CHPID "configure" attribute caching in CIO by not updating the
cache when SCLP returns no data, ensuring consistent sysfs output
- Remove CONFIG_LSM from default configs and rely on defaults, which
enables BPF LSM hook
* tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix handling of isolated VFs
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES
s390/cio: Fix CHPID "configure" attribute caching
s390/configs: Remove CONFIG_LSM
Thomas Weißschuh [Thu, 13 Feb 2025 14:55:17 +0000 (15:55 +0100)]
kbuild: userprogs: fix bitsize and target detection on clang
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Linus Torvalds [Sat, 15 Feb 2025 17:54:46 +0000 (09:54 -0800)]
Merge tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
which causes problems on 32-bit x86 configurations that have 64-bit
resource sizes:
x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3'
because gcc doesn't generate the trivial code for a 64-by-32 divide,
turning it into a function call to do a full 64-by-64 divide. And the
kernel intentionally doesn't provide that helper function, because 99%
of the time all you want is the narrower version.
Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is
purely for build testing, so this really is just about build coverage
failure.
But build coverage is good.
Side note: div_u64() would be suboptimal if you actually have a 32-bit
resource_t, so our "helper" for divides are admittedly making it harder
than it should be to generate good code for all the possible cases.
At some point, I'll consider 32-bit x86 so entirely legacy that I can't
find it in myself to care any more, and we'll just add the __udivdi3
library function.
But for now, the right thing to do is to use "div_u64()" to show that
you know that you are doing the simpler divide with a 32-bit number.
And the build error enforces that.
While fixing the build issue, also check for division-by-zero, and for
overflow. Which hopefully cannot happen on real production hardware,
but the value of 'ch_base_offset' can definitely be zero in other
places.
Linus Torvalds [Sat, 15 Feb 2025 16:13:45 +0000 (08:13 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling issues in gpio-bcm-kona
- add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious
wake up events
- add missing return value checks to gpio-stmpe
- fix a crash in error path in gpiochip_get_ngpios()
* tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix crash on error in gpiochip_get_ngpios()
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
gpio: bcm-kona: Add missing newline to dev_err format string
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
Masahiro Yamada [Thu, 13 Feb 2025 06:26:44 +0000 (15:26 +0900)]
kbuild: fix linux-headers package build when $(CC) cannot link userspace
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Masahiro Yamada [Tue, 11 Feb 2025 00:29:06 +0000 (09:29 +0900)]
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
Linus Torvalds [Sat, 15 Feb 2025 03:56:12 +0000 (19:56 -0800)]
Merge tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A few changes for alpha, including some important fixes for kernel
stack alignment"
* tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Use str_yes_no() helper in pci_dac_dma_supported()
alpha: Replace one-element array with flexible array member
alpha: align stack for page fault and user unaligned trap handlers
alpha: make stack 16-byte aligned (most cases)
alpha: replace hardcoded stack offsets with autogenerated ones
Linus Torvalds [Sat, 15 Feb 2025 00:49:07 +0000 (16:49 -0800)]
Merge tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update a BUILD_BUG_ON() usage that works on current compilers, but
breaks compilation on gcc 5.3.1 (Alex Williamson)
- Avoid use of FLR for Mediatek MT7922 WiFi; the device previously
worked after a long timeout and fallback to SBR, but after a recent
RRS change it doesn't work at all after FLR (Bjorn Helgaas)
* tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Avoid FLR for Mediatek MT7922 WiFi
PCI: Fix BUILD_BUG_ON usage for old gcc
Ashish Kalra [Mon, 10 Feb 2025 22:54:18 +0000 (22:54 +0000)]
x86/sev: Fix broken SNP support with KVM module built-in
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
Sean Christopherson [Mon, 10 Feb 2025 22:54:02 +0000 (22:54 +0000)]
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 10 Feb 2025 22:53:47 +0000 (22:53 +0000)]
crypto: ccp: Add external API interface for PSP module initialization
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 14 Feb 2025 23:32:47 +0000 (18:32 -0500)]
Merge tag 'kvmarm-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #2
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
Linus Torvalds [Fri, 14 Feb 2025 23:07:11 +0000 (15:07 -0800)]
Merge tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a regression caused by an inadvertent change of the
THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal
commits (Zhang Rui) and drop a stale piece of documentation (Daniel
Lezcano)"
* tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/cpufreq_cooling: Remove structure member documentation
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
Linus Torvalds [Fri, 14 Feb 2025 21:56:04 +0000 (13:56 -0800)]
Merge tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
Linus Torvalds [Fri, 14 Feb 2025 19:30:53 +0000 (11:30 -0800)]
Merge tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- fixes for a potential data corruption issue with IORING_OP_URING_CMD,
where not all the SQE data is stable. Will be revisited in the
future, for now it ends up with just always copying it beyond prep to
provide the same guarantees as all other opcodes
- make the waitid opcode setup async data like any other opcodes (no
real fix here, just a consistency thing)
- fix for waitid io_tw_state abuse
- when a buffer group is type is changed, do so by allocating a new
buffer group entry and discard the old one, rather than migrating
* tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux:
io_uring/uring_cmd: unconditionally copy SQEs at prep time
io_uring/waitid: setup async data in the prep handler
io_uring/uring_cmd: remove dead req_has_async_data() check
io_uring/uring_cmd: switch sqe to async_data on EAGAIN
io_uring/uring_cmd: don't assume io_uring_cmd_data layout
io_uring/kbuf: reallocate buf lists on upgrade
io_uring/waitid: don't abuse io_tw_state
Linus Torvalds [Fri, 14 Feb 2025 19:14:24 +0000 (11:14 -0800)]
Merge tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:24 +0000 (23:35 +0100)]
alpha: align stack for page fault and user unaligned trap handlers
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:23 +0000 (23:35 +0100)]
alpha: make stack 16-byte aligned (most cases)
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:22 +0000 (23:35 +0100)]
alpha: replace hardcoded stack offsets with autogenerated ones
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Linus Torvalds [Fri, 14 Feb 2025 19:00:42 +0000 (11:00 -0800)]
Merge tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Steven Rostedt [Fri, 14 Feb 2025 15:28:20 +0000 (10:28 -0500)]
ring-buffer: Validate the persistent meta data subbuf array
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home Fixes: c76883f18e59b ("ring-buffer: Add test if range of boot buffer is valid") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Thu, 13 Feb 2025 18:41:32 +0000 (13:41 -0500)]
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
Currently if __tracing_resize_ring_buffer() returns an error, the
tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory
issue that caused the function to fail. If the ring buffer is memory
mapped, then the resizing of the ring buffer will be disabled. But if the
user tries to resize the buffer, it will get an -ENOMEM returned, which is
confusing because there is plenty of memory. The actual error returned was
-EBUSY, which would make much more sense to the user.
Steven Rostedt [Thu, 13 Feb 2025 18:19:57 +0000 (13:19 -0500)]
ring-buffer: Unlock resize on mmap error
Memory mapping the tracing ring buffer will disable resizing the buffer.
But if there's an error in the memory mapping like an invalid parameter,
the function exits out without re-enabling the resizing of the ring
buffer, preventing the ring buffer from being resized after that.
Linus Torvalds [Fri, 14 Feb 2025 17:46:51 +0000 (09:46 -0800)]
Merge tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- core: fix potential memory leak in iopf_queue_remove_device()
- Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq()
- AMD-Vi: fix faults happening in resume path
- typo and spelling fixes
* tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID
iommu/exynos: Fix typos
iommu: Fix a spelling error
iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path
iommu: Fix potential memory leak in iopf_queue_remove_device()
Linus Torvalds [Fri, 14 Feb 2025 16:15:17 +0000 (08:15 -0800)]
Merge tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
Jann Horn [Fri, 14 Feb 2025 01:39:50 +0000 (02:39 +0100)]
partitions: mac: fix handling of bogus partition table
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
John Keeping [Sat, 8 Feb 2025 12:41:44 +0000 (12:41 +0000)]
serial: 8250: Fix fifo underflow on flush
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Abel Vesa [Thu, 6 Feb 2025 09:28:28 +0000 (11:28 +0200)]
usb: typec: Add support for Parade PS8830 Type-C Retimer
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY
and the Type-C connector, and provides orientation and altmode handling.
The boards that use this retimer are the ones featuring the Qualcomm
Snapdragon X Elite SoCs.
Add a driver with support for the following modes:
- DisplayPort 4-lanes
- DisplayPort 2-lanes + USB3
- USB3
There is another variant of this retimer which is called PS8833. It seems
to be really similar to the PS8830, so future-proof this driver by
naming it ps883x.
projects / users / jedix / linux-maple.git / log