Chris Morgan [Thu, 29 Aug 2024 20:45:17 +0000 (15:45 -0500)]
arm64: dts: rockchip: Add GameForce Ace
The GameForce Ace is a portable gaming device based on the Rockchip
RK3588s SoC.
The device contains the following hardware that is tested/working:
- 128GB eMMC
- SDMMC card slot
- Ampak SDIO WiFi 5/BT
- NVME 2242 socket
- 8 or 12GB of RAM
- Goodix based touchscreen
- Stereo speakers, internal microphone, and TRRS headphone jack.
- Dual GPIO vibrators (implemented as gpio-pwm because they are
quite strong)
- Multiple face buttons, dual analog joysticks, and dual analog
triggers
- PWM fan with tach pin.
The device also contains the following hardware that is partially or
currently not working:
- 1920x1080 DSI display
- HDMI port
- USB-C port with DP alt-mode
- TI bq25703 charger controller
Jonas Karlman [Sun, 1 Sep 2024 11:20:15 +0000 (11:20 +0000)]
arm64: dts: rockchip: Add Hardkernel ODROID-M2
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Add initial support for eMMC, SD-card, Ethernet, PCIe and USB.
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Add devicetree binding documentation for the Hardkernel ODROID-M2 board.
Heiko Stuebner [Thu, 29 Aug 2024 13:21:00 +0000 (15:21 +0200)]
arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6
vcc3v3-sd-s0-regulator used enable-active-low. According the binding
of the fixed regulator, that is the assumed mode of operation if
enable-active-high is not specified. So this is property is not part
of the binding, therefore remove it.
Heiko Stuebner [Thu, 29 Aug 2024 13:20:58 +0000 (15:20 +0200)]
arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6
A remant from moving from the vendor kernel, the regulator is using
a fairchild fcs prefix instead of rockchip,* in the mainline kernel
according to its binding.
Marcin Juszkiewicz [Thu, 29 Aug 2024 12:26:55 +0000 (14:26 +0200)]
arm64: dts: rockchip: add NanoPC-T6 LTS
In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.
There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector
The top USB 2.0 connector comes directly from the SoC.
$ ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether c2:58:fc:70:55:86 brd ff:ff:ff:ff:ff:ff
3: wlP4p65s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 2c:05:47:65:5b:ed brd ff:ff:ff:ff:ff:ff
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0bda:b85b Realtek Semiconductor Corp. Bluetooth Radio
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 0789:0336 Logitec Corp. LMD USB Device
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Jonas Karlman [Tue, 27 Aug 2024 21:18:18 +0000 (21:18 +0000)]
arm64: dts: rockchip: Add Hardkernel ODROID-M1S
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add devicetree binding documentation for the Hardkernel ODROID-M1S board.
Jonas Karlman [Tue, 27 Aug 2024 21:18:16 +0000 (21:18 +0000)]
arm64: dts: rockchip: Correct vendor prefix for Hardkernel ODROID-M1
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Jonas Karlman [Tue, 27 Aug 2024 21:18:15 +0000 (21:18 +0000)]
dt-bindings: arm: rockchip: Correct vendor for Hardkernel ODROID-M1
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Jonathan Liu [Wed, 28 Aug 2024 07:47:53 +0000 (17:47 +1000)]
arm64: dts: rockchip: Enable RK809 audio codec for Radxa ROCK 4C+
This adds the necessary device tree changes to enable analog audio
output for the 3.5 mm TRS headphone jack on the Radxa ROCK 4C+ with
its RK809 audio codec.
Emmanuel Gil Peyrot [Tue, 27 Aug 2024 18:10:20 +0000 (20:10 +0200)]
arm64: dts: rockchip: Add VEPU121 to RK3588
RK3588 has 4 Hantro G1 encoder-only cores. They are all independent IP,
but can be used as a cluster (i.e. sharing work between the cores).
These cores are called VEPU121 in the TRM. The TRM describes one more
VEPU121, but that is combined with a Hantro H1. That one will be handled
using the VPU binding instead.
Add device tree overlay for the WolfVision PF5 Visualizer display.
Since there shall be additional variants of the WolfVision PF5 display in
future, move common definitions to a device tree include file.
Heiko Stuebner [Thu, 15 Aug 2024 16:25:19 +0000 (18:25 +0200)]
arm64: dts: rockchip: drop obsolete reset-names from rk356x rng node
The reset-names property is not part of the binding, so drop it.
It is also not used by the driver, so that property was likely
a leftover from some vendor-kernel node.
Heiko Stuebner [Sat, 10 Aug 2024 21:14:38 +0000 (23:14 +0200)]
arm64: dts: rockchip: add product-data eeproms to QNAP TS433
The device contains two i2c-connected eeproms holding some product-
specific values. One sitting on the mainboard and one on the statically
connected backplane.
While the eeprom chips themself have a size of 512 byte, the eeprom data
only uses 256 byte each, probably to stay compatible with other models.
Sergey Bostandzhyan [Wed, 14 Aug 2024 17:00:46 +0000 (17:00 +0000)]
arm64: dts: rockchip: Add DTS for FriendlyARM NanoPi R2S Plus
The R2S Plus is basically an R2S with additional eMMC.
The eMMC configuration for the DTS has been extracted and copied from
rk3328-nanopi-r2.dts, v2017.09 branch from the friendlyarm/uboot-rockchip
repository.
Dragan Simic [Sun, 4 Aug 2024 21:10:24 +0000 (23:10 +0200)]
arm64: dts: rockchip: Raise Pinebook Pro's panel backlight PWM frequency
Increase the frequency of the PWM signal that drives the LED backlight of
the Pinebook Pro's panel, from about 1.35 KHz (which equals to the PWM
period of 740,740 ns), to exactly 8 kHz (which equals to the PWM period of
125,000 ns). Using a higher PWM frequency for the panel backlight, which
reduces the flicker, can only be beneficial to the end users' eyes.
On top of that, increasing the backlight PWM signal frequency reportedly
eliminates the buzzing emitted from the Pinebook Pro's built-in speakers
when certain backlight levels are set, which cause some weird interference
with some of the components of the Pinebook Pro's audio chain.
The old value for the backlight PWM period, i.e. 740,740 ns, is pretty much
an arbitrary value that was selected during the very early bring-up of the
Pinebook Pro, only because that value seemed to minimize horizontal line
distortion on the display, which resulted from the old X.org drivers causing
screen tearing when dragging windows around. That's no longer an issue, so
there are no reasons to stick with the old PWM period value.
The lower and the upper backlight PWM frequency limits for the Pinebook Pro's
panel, according to its datasheet, are 200 Hz and 10 kHz, respectively. [1]
These changes still leave some headroom, which may have some positive effects
on the lifetime expectancy of the panel's backlight LEDs.
Andy Yan [Tue, 30 Jul 2024 10:24:33 +0000 (18:24 +0800)]
arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook
Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0].
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
This patch add basic support to bringup eMMC/USB HOST/WiFi/TouchPad/
Battery/PCIE NVME, and can also drive a HDMI output with out of tree
hdmi patches.
Florian Klink [Thu, 8 Aug 2024 10:30:47 +0000 (13:30 +0300)]
arm64: dts: rockchip: add rfkill node for M.2 E wifi on orangepi-5-plus
This follows the same logic as 82d40b141a4c ("arm64: dts: rockchip: add
rfkill node for M.2 Key E WiFi on rock-5b").
On the orangepi-5-plus, there's also a GPIO pin connecting the WiFi
enable signal inside the M.2 Key E slot.
The exact GPIO PIN can be validated in the Armbian rk-5.10-rkr4 kernel
rk3588-orangepi-5-plus.dtsi file [1], which contains a `wifi_disable`
node referencing RK_PC4 on &gpio0.
With this change, I was able to get a "Intel Corporation Wi-Fi
6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak] (rev 1a)" up, while
`rfkill` previously only mentioned to be hardware blocked.
Heiko Stuebner [Mon, 5 Aug 2024 16:20:52 +0000 (18:20 +0200)]
arm64: dts: rockchip: actually enable pmu-io-domains on qnap-ts433
Contrary to the vendor-kernel the pmu-io-domains are not enabled by
default. This resulted in the value not being set according to the
regulator, which in turn made the gmac0 interface that is connected
to the vccio4 supply inoperable.
Uwe Kleine-König [Mon, 4 Mar 2024 08:46:11 +0000 (09:46 +0100)]
arm64: dts: rockchip: Simplify network PHY connection on qnap-ts433
While it requires to have the right phy driver loaded (i.e. motorcomm)
to make the phy asserting the right delays, this is generally the
preferred way to define the MAC <-> PHY connection.
arm64: dts: rockchip: Move RK3399 OPPs to dtsi files for SoC variants
Rename the Rockchip RK3399 SoC dtsi files and, consequently, adjust their
contents and the contents of the affected board dts(i) files appropriately,
to "encapsulate" the different CPU and GPU OPPs for each of the supported
RK3399 SoC variants into the respective SoC variant dtsi files.
Moving the OPPs to the SoC variant dtsi files, instead of requiring the
board dts(i) files to include both the SoC variant dtsi file and the right
OPP variant dtsi file, reduces the possibility for mismatched inclusion and
improves the overall hierarchical representation of data.
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d836 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected dtb files before and after these changes. In more
detail, all decompiled dtb files remain exactly the same, except the files
list below, which results from all of them stemming from the same base board
dtsi file (rk3399-rock-pi-4.dtsi), while all of them include one of the three
different RK3399 SoC variant dtsi files by themselves:
When compared with the decompiled original dtb files, these dtb files have
some of their blocks shuffled around a bit and some of their phandles have
different values, as a result of the changes to the order in which the
building blocks from the parent dtsi files are included into them, but they
still effectively remain the same as the originals.
The only exception to the "include only a SoC variant dtsi" is found in
rk3399-evb.dts, which includes rk3399-base.dtsi instead of rk3399.dtsi.
This is intentional, because this board dts file doesn't enable the TSADC,
so including rk3399.dtsi would enable the SoC to go into higher OPPs with
no thermal throttling in place. Let's hope that people interested in this
board will fix this in the future.
As a side note, due to the nature of introduced changes, this commit is best
viewed using the --break-rewrites option for git-log(1).
arm64: dts: rockchip: add missing pmic information on Qnap-TS433
Fill in the missing pieces for RK809 pmic used on the TS433.
The regulator setup comes from the vendor-devicetree, so without proper
schematics its accuracy is somewhat unclear, but it looks really similar
to all the other rk3568 boards, so follows the reference design it seems.
The one caveat is related to vcc3v3_sd. This regulator needs to stay on.
When turned off because of no users, access to both PCIe controllers
will stall. Maybe this rail does supply the 100MHz refclk generation
or so.
arm64: dts: rockchip: define cpu-supply on the Qnap-TS433
The TS433 seems to use a silergy,syr827 regulator for the cpu supply.
At least that is the compatible used in the vendor devicetree, though
it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the
cpu cores.
The TS433 has 3 buttons, power and copy in the front as well as a reset
pinhole button on the back. The power-button is connected to the embedded
controller while the other two buttons are just gpio connected.
Add the gpio-keys definition for the two buttons we can handle right now.
arm64: dts: rockchip: add board-aliases for Qnap-TS433
Add the aliases for the internal network interface as well as the emmc
on the board and make sure the dedicated RTC is always the first one.
The TS433 actually has two rtc devices. One coming from the rk809 pmic
without added functionality and also a dedicated RTC from Mycrocrystal
that is battery backed to keep the time.
arm64: dts: rockchip: enable sata1+2 on Qnap-TS433
The TS433 has 4 bays. The last two are accessed via a pci-connected
sata controller, while the first two are accessed via the rk3568's
sata controllers. Enable these two now.
arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433
The TS433 uses both pcie controllers for sata and the 2nd network
interface. Set the needed data-lanes in the pcie3 phy and enable
the second pcie controller, as well as remove the bifurcation comment.
Alex Bee [Wed, 10 Jul 2024 13:28:12 +0000 (15:28 +0200)]
arm64: dts: rockchip: Add sdmmc_ext for RK3328
RK3328 SoC has a fourth mmc controller called SDMMC_EXT. Some
boards have sdio wifi connected to it. In order to use it
one would have to add the pinctrls from sdmmc0ext group which
is done on board level.
Chukun Pan [Wed, 10 Jul 2024 14:30:17 +0000 (22:30 +0800)]
arm64: dts: rockchip: Enable UHS-I SDR-50 for Lunzn FastRhino R66S
This board can work in UHS-I SDR-104 mode, but may not be stable,
use SDR-50 instead. Remove the max-frequency property, which is
already defined in rk356x.dtsi.
Chukun Pan [Wed, 10 Jul 2024 14:30:15 +0000 (22:30 +0800)]
arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
Replace the deprecated snps,reset-xxx bindings to the generic Ethernet
PHY reset GPIO bindings. According to the PHY datasheet, the RTL8211F
PHY needs a 10ms assert delay and at least 72ms deassert delay.
Considering the possibility of mixed use of PHY chips, increased the
reset time.
arm64: dts: rockchip: Correct the Pinebook Pro battery design capacity
All batches of the Pine64 Pinebook Pro, except the latest batch (as of 2024)
whose hardware design was revised due to the component shortage, use a 1S
lithium battery whose nominal/design capacity is 10,000 mAh, according to the
battery datasheet. [1][2] Let's correct the design full-charge value in the
Pinebook Pro board dts, to improve the accuracy of the hardware description,
and to hopefully improve the accuracy of the fuel gauge a bit on all units
that don't belong to the latest batch.
The above-mentioned latest batch uses a different 1S lithium battery with
a slightly lower capacity, more precisely 9,600 mAh. To make the fuel gauge
work reliably on the latest batch, a sample battery would need to be sent to
CellWise, to obtain its proprietary battery profile, whose data goes into
"cellwise,battery-profile" in the Pinebook Pro board dts. Without that data,
the fuel gauge reportedly works unreliably, so changing the design capacity
won't have any negative effects on the already unreliable operation of the
fuel gauge in the Pinebook Pros that belong to the latest batch.
According to the battery datasheet, its voltage can go as low as 2.75 V while
discharging, but it's better to leave the current 3.0 V value in the dts file,
because of the associated Pinebook Pro's voltage regulation issues.
Christopher Obbard [Thu, 18 Jul 2024 08:40:25 +0000 (09:40 +0100)]
arm64: dts: rockchip: add Firefly Core-PX30-JD4 SoM
The Firefly Core-PX30-JD4 SoM is a 69.6x49.6mm (260 pin SODIMM connector)
system-on-module from Firefly, featuring the Rockchip PX30.
It provides the following feature set:
* on-module DDR3 (1GB/2GB)
* on-module eMMC 5.1 (8GB/16GB/32GB/64GB/128GB)
* on-module NPU (optional)
* SD card (on a baseboard) via edge connector
* 100mbps Ethernet (on a baseboard) via edge connector
* MIPI-DSI (on a baseboard) via edge connector
* Audio (on a baseboard) via edge connector
- 1x SPDIF
- 1x 8-channel I2S/TDM
- 1x 2-channel I2S/TDM
- 1x 8-channel PDM
* USB (on a baseboard) via edge connector
- 1x USB 2.0 OTG
- 1x USB 2.0 host
* Various GPIO (on a baseboard) via edge connector
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
minmax: simplify and clarify min_t()/max_t() implementation
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
kbuild: Fix '-S -c' in x86 stack protector scripts
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
Merge tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
Merge tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
Merge tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Merge tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
Merge tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
Merge tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for the merge window to fix the build and boot
on some SoCs.
- Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
that stack contents aren't used for things like clk flags leading
to unexpected behavior
- Don't leak stack contents in a debug print in the new Sophgo clk
driver
- Disable the new T-Head clk driver on 32-bit targets to fix the
build due to a division
- Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
last cycle by using a struct clk_hw directly instead of a struct
clk consumer"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
clk: T-Head: Disable on 32-bit Targets
clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
Merge tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
Merge tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Prevent the thermal core from flooding the kernel log with useless
messages if thermal zone temperature can never be determined (or its
sensor has failed permanently) and make it finally give up and disable
defective thermal zones (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Back off when polling thermal zones on errors
thermal: trip: Split thermal_zone_device_set_mode()
projects / linux.git / log