Jagan Teki [Tue, 8 Nov 2022 04:13:53 +0000 (09:43 +0530)]
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
Add saradc compatible string for rockchip rv1126.
Cc: linux-iio@vger.kernel.org Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221108041400.157052-4-jagan@edgeble.ai Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lorenzo Bianconi [Sun, 6 Nov 2022 14:36:54 +0000 (15:36 +0100)]
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
Add device bindings for lsm6dsv16x IMU sensor.
Use lsm6dsv as fallback device for lsm6dsv16x since it implements all the
features currently supported by lsm6dsv16x.
Lorenzo Bianconi [Sun, 6 Nov 2022 14:36:53 +0000 (15:36 +0100)]
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
Add support to STM LSM6DSV16X (accelerometer and gyroscope) Mems sensor.
The LSM6DSV16X sensor can use LSM6DSV as fallback device since it
implements all the LSM6DSV16X features currently implemented in
st_lsm6dsx.
Cosmin Tanislav [Thu, 3 Nov 2022 13:00:41 +0000 (15:00 +0200)]
iio: temperature: ltc2983: support more parts
Add support for the following parts:
* LTC2984
* LTC2986
* LTM2985
The LTC2984 is a variant of the LTC2983 with EEPROM.
The LTC2986 is a variant of the LTC2983 with only 10 channels,
EEPROM and support for active analog temperature sensors.
The LTM2985 is software-compatible with the LTC2986.
Cosmin Tanislav [Thu, 3 Nov 2022 13:00:40 +0000 (15:00 +0200)]
dt-bindings: iio: temperature: ltc2983: support more parts
Add support for the following parts:
* LTC2984
* LTC2986
* LTM2985
The LTC2984 is a variant of the LTC2983 with EEPROM.
The LTC2986 is a variant of the LTC2983 with only 10 channels,
EEPROM and support for active analog temperature sensors.
The LTM2985 is software-compatible with the LTC2986.
The 'adi,mux-delay-config-us' property is broken. It was supposed to
be in us, but the value is actually written directly to the register.
Describe the fact that it is broken and how it actually works.
Cosmin Tanislav [Thu, 3 Nov 2022 13:00:36 +0000 (15:00 +0200)]
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
Excitation cannot be set to auto-range when using a custom thermistor
or Steinhart sensor type. Default it to 1000nA to match the driver
and remove the auto-range value from the enum.
Cosmin Tanislav [Thu, 3 Nov 2022 13:00:31 +0000 (15:00 +0200)]
dt-bindings: iio: temperature: ltc2983: use hex for sensor address
Addresses should be in hex, fix it.
Although the driver initially specified 1-20, it can be made free-range
since the address is supposed to match reg, onto which we can impose
restrictions based on the compatible property value.
Bagas Sanjaya [Sun, 6 Nov 2022 14:02:33 +0000 (21:02 +0700)]
Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes
Sphinx reports two warnings on sysfs documentation for AD4130 driver:
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Block quote ends without a blank line; unexpected unindent.
These are due to misformatting of sinc* modes list. Format it with bullet
list. Since each entry spans multiple lines, separate each with a blank
line.
Lorenzo Bianconi [Fri, 28 Oct 2022 11:23:42 +0000 (13:23 +0200)]
iio: imu: st_lsm6dsx: introduce sw trigger support
There are some hw configuration where irq0 and/or irq1 pins are not
connected to the SPI or I2C/I3C controller. In order to avoid polling
the output register introduce iio-sw trigger support when irq line is
not available (or hw FIFO is not supported).
Krzysztof Kozlowski [Thu, 27 Oct 2022 14:34:11 +0000 (10:34 -0400)]
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
Cleanup existing example (generic node name for spmi, use 4-space
indentation) and add example for ADCv7 copied from
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml.
Jonathan Cameron [Sun, 16 Oct 2022 17:09:50 +0000 (18:09 +0100)]
iio: adc: cc10001: Switch remaining IIO calls in probe to devm_ forms.
As everything else is now handled by devm managed releases the
triggered buffer setup and IIO device registration can also be
moved over to their devm forms allowing dropping of remove().
Only user of drvdata associated with the struct device was the
remove function, so also drop the platform_set_drvdata() call.
Jonathan Cameron [Sun, 16 Oct 2022 17:09:49 +0000 (18:09 +0100)]
iio: adc: cc10001: Use devm_ to call device power down.
It is presumably safe to call the powerdown whether or not we are
in the commented shared state (the driver always did this).
The power down was previously out of order wrt to the probe() function
so move using devm_ will ensure it occurs after the userspace interfaces
are removed.
Matti Vaittinen [Mon, 3 Oct 2022 08:13:53 +0000 (11:13 +0300)]
iio: Don't silently expect attribute types
The iio_triggered_buffer_setup_ext() and the
devm_iio_kfifo_buffer_setup_ext() were changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy
the pointer to stored string constant and when the sysfs file is read the
kernel will access to invalid location.
Change the function signatures to expect an array of iio_dev_attrs to
avoid similar errors in the future.
Merge conflict resolved whilst applying due to patch crossing with
two new drivers (kx022a accelerometer and ad4130 ADC).
Matti Vaittinen [Mon, 3 Oct 2022 08:12:04 +0000 (11:12 +0300)]
iio: Add IIO_STATIC_CONST_DEVICE_ATTR
Add IIO_STATIC_CONST_DEVICE_ATTR macro for creating an read-only
iio_dev_attr which returns constant value. This macro is intended to be
used when replacing the IIO_CONST_ATTR - attributes for triggered
buffers because the triggered buffer attributes must be of type
iio_dev_attr.
Matti Vaittinen [Mon, 24 Oct 2022 12:40:29 +0000 (15:40 +0300)]
iio: accel: Support Kionix/ROHM KX022A accelerometer
KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g), and probably some other cool features.
Add support for the basic accelerometer features such as getting the
acceleration data via IIO. (raw reads, triggered buffer [data-ready] or
using the WMI IRQ).
Important things to be added include the double-tap, motion
detection and wake-up as well as the runtime power management.
Matti Vaittinen [Mon, 24 Oct 2022 12:40:11 +0000 (15:40 +0300)]
dt-bindings: iio: Add KX022A accelerometer
KX022A is a 3-axis Accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g) and probably some other cool features.
Add the basic device tree description for the accelerometer. Only basic
accelerometer features are considered as of now - new properties may or
may not be needed in the future when rest of the features are supported.
Crt Mori [Mon, 24 Oct 2022 10:22:05 +0000 (12:22 +0200)]
iio: temperature: mlx90632 Style alignment for the driver
Changing and aligning the overall style of the driver with the recent
reviews. There is no functional change, only type generalization and
moving to the reverse Christmas tree for variable declarations.
Jonathan Cameron [Sun, 16 Oct 2022 16:34:07 +0000 (17:34 +0100)]
iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()
This driver only turns the power for some regulators on at probe and off
via a custom devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces all this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-13-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:34:06 +0000 (17:34 +0100)]
iio: light: noa1305: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-12-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:34:05 +0000 (17:34 +0100)]
iio: light: ltr501: Use devm_regulator_bulk_get_enable()
This driver only turns the power for some regulators on at probe and off
via a custom devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces all this boilerplate code.
Jonathan Cameron [Sun, 16 Oct 2022 16:34:04 +0000 (17:34 +0100)]
iio: humidity: hts211: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-10-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:34:03 +0000 (17:34 +0100)]
iio: frequency: ad9523: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Note that in event of an error on the devm_regulator_get() the driver
would have continued without enabling the regulator which is probably
not a good idea. So here we handle any error as a reason to fail the
probe(). In theory this may expose breakage on a platform that was
previously papered over but it seems low risk.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-9-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:34:02 +0000 (17:34 +0100)]
iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()
These drivers only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The two regulators were handled
separately so also switch to bulk registration.
The new devm_regulator_bulk_get_enable() replaces all this boilerplate
code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-8-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:34:01 +0000 (17:34 +0100)]
iio: cdc: ad7150: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Jonathan Cameron [Sun, 16 Oct 2022 16:34:00 +0000 (17:34 +0100)]
iio: accel: msa311: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-6-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:33:59 +0000 (17:33 +0100)]
iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.
Jonathan Cameron [Sun, 16 Oct 2022 16:33:58 +0000 (17:33 +0100)]
iio: accel: fxls8962af: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-4-jic23@kernel.org
Jonathan Cameron [Sun, 16 Oct 2022 16:33:56 +0000 (17:33 +0100)]
iio: accel: adxl367: Use devm_regulator_bulk_get_enable()
This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-2-jic23@kernel.org
Cosmin Tanislav [Fri, 21 Oct 2022 10:41:15 +0000 (13:41 +0300)]
iio: adc: ad4130: add AD4130 driver
AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.
The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Cosmin Tanislav [Fri, 21 Oct 2022 10:41:14 +0000 (13:41 +0300)]
dt-bindings: iio: adc: add AD4130
AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.
The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Matti Vaittinen [Fri, 19 Aug 2022 19:21:02 +0000 (22:21 +0300)]
iio: amplifier: hmc425a: simplify using devm_regulator_get_enable()
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Matti Vaittinen [Fri, 19 Aug 2022 19:20:47 +0000 (22:20 +0300)]
iio: adc: max1363: simplify using devm_regulator_get_enable()
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Matti Vaittinen [Fri, 19 Aug 2022 19:20:32 +0000 (22:20 +0300)]
iio: adc: max1241: simplify using devm_regulator_get_enable()
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Matti Vaittinen [Fri, 19 Aug 2022 19:20:18 +0000 (22:20 +0300)]
iio: adc: ad7606: simplify using devm_regulator_get_enable()
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Whilst here also switch to dev_err_probe() to provide more information
if a deferred probe occurs.
Matti Vaittinen [Fri, 19 Aug 2022 19:19:01 +0000 (22:19 +0300)]
iio: adc: ad7192: Simplify using devm_regulator_get_enable()
Use devm_regulator_get_enable() instead of open coded get, enable,
add-action-to-disable-at-detach - pattern. Also drop the seemingly unused
struct member 'dvdd'.
Jonathan Cameron [Sun, 25 Sep 2022 15:57:19 +0000 (16:57 +0100)]
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace
As these exports are only relevant to core module and users in the
bus specific modules, move them out of the main kernel namespace.
Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Cc: Linus Walleij <linus.walleij@linaro.org>
--
Dropped Linus' tag as the new patch is significantly different.
Jonathan Cameron [Sun, 25 Sep 2022 15:57:18 +0000 (16:57 +0100)]
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
As these exports are only relevant to core module and users in the
bus specific modules, move them out of the main kernel namespace.
Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
--
EXPORT_NS_GPL_DEV_PM_OPS()
Jonathan Cameron [Sun, 25 Sep 2022 15:57:17 +0000 (16:57 +0100)]
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Dropped Rui's tag on basis this is rather different from v1 due to
the different macro implementation.
Jonathan Cameron [Sun, 25 Sep 2022 15:57:16 +0000 (16:57 +0100)]
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
Using this macro allows the compiler to remove unused
structures and callbacks if we are not building with
CONFIG_PM* without needing __maybe_unused markings.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sean Nyekjaer <sean@geanix.com>
--
Switched to Paul Cercueil's more flexible implementation fo the macro.
Dropped Sean's Ack given new form of macro being used.
Rajat Khandelwal [Mon, 10 Oct 2022 17:37:20 +0000 (23:07 +0530)]
iio: pressure: mpl115: Implementing low power mode by shutdown gpio
MPL115 supports shutdown gpio which can be used to set the state
to low power mode. Power from all internal circuits and
registers is removed. This is done by pulling the SHDN pin to low.
This patch enables runtime PM on MPL115 to increase power savings.
According to spec., a wakeup time period of ~5 ms exists between
waking up and actually communicating with the device. This is
implemented using sleep delay.
Nuno Sá [Wed, 12 Oct 2022 15:16:20 +0000 (17:16 +0200)]
iio: core: move 'mlock' to 'struct iio_dev_opaque'
Now that there are no more users accessing 'mlock' directly, we can move
it to the iio_dev private structure. Hence, it's now explicit that new
driver's should not directly use this lock.
Nuno Sá [Wed, 12 Oct 2022 15:16:19 +0000 (17:16 +0200)]
iio: health: max30102: do not use internal iio_dev lock
The pattern used in this device does not quite fit in the
iio_device_claim_direct_mode() typical usage. In this case, we want to
know if we are in buffered mode or not to know if the device is powered
(buffer mode) or not. And depending on that max30102_get_temp() will
power on the device if needed. Hence, in order to keep the same
functionality, we try to:
1. Claim Buffered mode;
2: If 1) succeeds call max30102_get_temp() without powering on the
device;
3: Release Buffered mode;
4: If 1) fails, Claim Direct mode;
5: If 4) succeeds call max30102_get_temp() with powering on the device;
6: Release Direct mode;
7: If 4) fails, goto to 1) and try again.
This dance between buffered and direct mode is not particularly pretty
(as well as the loop introduced by the goto statement) but it does allow
us to get rid of the mlock usage while keeping the same behavior.
Nuno Sá [Wed, 12 Oct 2022 15:16:18 +0000 (17:16 +0200)]
iio: health: max30100: do not use internal iio_dev lock
The pattern used in this device does not quite fit in the
iio_device_claim_direct_mode() typical usage. In this case,
iio_buffer_enabled() was being used not to prevent the raw
access but to allow it. Hence, let's make use of the new
iio_device_claim_buffer_mode() API to make sure we stay in
buffered mode during the complete read.
Note that we are shadowing the error code returned by
iio_device_claim_buffer_mode() so that we keep the original one
(-EAGAIN). The reason is that some userspace stack might already be
relying on this particular code so that we are not taking chances and
leave it alone.
These APIs are analogous to iio_device_claim_direct_mode() and
iio_device_release_direct_mode() but, as the name suggests, with the
logic flipped. While this looks odd enough, it will have at least two
users (in following changes) and it will be important to move the IIO
mlock to the private struct.
Olivier Moysan [Wed, 12 Oct 2022 14:22:01 +0000 (16:22 +0200)]
iio: adc: stm32: manage min sampling time on all internal channels
Force minimum sampling time for all internal channels according
to datasheet requirement. This value can be increased through
DT st,min-sample-time-ns property.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20221012142205.13041-5-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Olivier Moysan [Wed, 12 Oct 2022 14:22:00 +0000 (16:22 +0200)]
iio: adc: stm32-adc: add stm32mp13 support
Add STM32 ADC support for STM32MP13x SOCs family.
On STM32MP13x, each ADC peripheral has a single ADC block.
These ADC peripherals, ADC1 and ADC2, are fully independent.
This introduces changes in common registers handling.
Some features such as boost mode, channel preselection and
linear calibration are not supported by the STM32MP13x ADC.
Add diversity management for these features.
The STM32MP13x ADC introduces registers and bitfield variants
on existing features such as calibration factors and internal
channels. Add register diversity management.
Add also support for new internal channels VDDCPU and VDDQ_DDR.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221012142205.13041-4-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add st,stm32mp13-adc-core and st,stm32mp13-adc compatibles
to support STM32MPU13 SoC.
On STM32MP13x, each ADC peripheral has a single ADC block.
These ADC peripherals, ADC1 and ADC2, are fully independent.
Main characteristics of STM32MP13x ADC:
- One interrupt line per ADC
- 6 to 12 bits resolution
- 19 channels
ADC2 instance supports two extra internal channels VDDCPU and VDDQ_DDR.
Add "vddcpu" and "vddq_ddr" internal channels names to the reserved
labels list.
ChiaEn Wu [Tue, 11 Oct 2022 04:05:45 +0000 (12:05 +0800)]
iio: adc: mt6370: Add MediaTek MT6370 support
MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.
Add support for the MT6370 ADC driver for system monitoring, including
charger current, voltage, and temperature.
projects / users / dwmw2 / linux.git / log