Jo-Philipp Wich [Wed, 6 Jun 2018 11:41:26 +0000 (13:41 +0200)]
mtd: add build hack to reintroduce shared mtd for older releases
When running in SDK context, treat the mtd package as shared to reintroduce
the common repository binary package for older released IBs.
When building outside of the SDK, create a nonshared package with a higher
PKG_REVISION to let opkg prefer that over the shared one in the common repo.
Ref: https://forum.lede-project.org/t/17-01-4-opkg-install-cmd-cannot-install-package-mtd/15312 Fixes: aaac9e82aa ("mtd: mark as nonshared to fix FS#484") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The mtd tool is built with different configurations depending on the
target. For example, brcm47xx adds the fixtrx subcommand, without which
an image fails when booting the second time.
Mark the mtd package as nonshared to really fix FS#484.
This make sit possible to store informations about a session and reuse
it later. When used by a server it increases the time to create a new
TLS session from about 1 second to less than 0.1 seconds.
The size of the ipkg file increased by about 800 Bytes.
Imre Kaloz [Thu, 15 Feb 2018 18:57:05 +0000 (19:57 +0100)]
mvebu: Add support for WRT3200ACM with new NAND flash
Newer Linksys boards might come with a Winbond W29N02GV which can be
configured in different ways. Make sure we configure it the same way as
the older chips so everything keeps working.
Mirko Parthey [Tue, 22 May 2018 19:23:36 +0000 (21:23 +0200)]
brcm47xx: add switch port mapping to Asus WL-500W
Switch ports 0..3 are connected to external ports LAN{1..4} in sequence,
switch port 4 is not used, and switch port 5 is connected to the CPU.
The WAN port is attached to the CPU's second network interface; it has no
connection to the internal switch.
Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping.
Chris Blake [Fri, 31 Mar 2017 09:31:21 +0000 (04:31 -0500)]
apm821xx: Add default packages to NAND target
This moves core router packages to the NAND target, to ensure they are
applied to all images. This change is being done due to an issue found
when flashing the MX60W image, which came without these when built as a
multi image.
"The OpenWRT Commit" - this significantly speeds up performance on cheap
plastic MIPS routers, and presumably the remaining MIPS32r2 super computers
out there.
* timers: reinitialize state on init
* timers: round up instead of down in slack_time
* timers: remove slack_time
* timers: clear send_keepalive timer on sending handshake response
* timers: no need to clear keepalive in persistent keepalive
Andrew He and I have helped simplify the timers and remove some old warts,
making the whole system a bit easier to analyze.
* tools: fix errno propagation and messages
Error messages are now more coherent.
* device: remove allowedips before individual peers
This avoids an O(n^2) traversal in favor of an O(n) one. Before systems with
many peers would grind when deleting the interface.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Toke Høiland-Jørgensen [Sun, 13 May 2018 18:15:50 +0000 (20:15 +0200)]
wireguard: Add support for ip6prefix config option
This makes it easier to distribute prefixes over a wireguard tunnel
interface, by simply setting the ip6prefix option in uci (just like with
other protocols).
Obviously, routing etc needs to be setup properly for things to work; this
just adds the config option so the prefix can be assigned to other
interfaces.
6b4a340 version: bump snapshot faa2103 compat: don't clear header bits on RHEL 4014532 compat: handle RHEL 7.5's recent backports 66589bc queueing: preserve pfmemalloc header bit 37f114a chacha20poly1305: make gcc 8.1 happy 926caae socket: use skb_put_data 724d979 wg-quick: preliminary support for go implementation c454c26 allowedips: simplify arithmetic 71d44be allowedips: produce better assembly with unsigned arithmetic 5e3532e allowedips: use native endian on lookup 856f105 allowedips: add selftest for allowedips_walk_by_peer 41df6d2 embeddable-wg-library: zero attribute padding 9a1bea6 keygen-html: add zip file example f182b1a qemu: retry on 404 in wget for kernel.org race
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
7cc2668 version: bump snapshot 860c7c7 poly1305: do not place constants in different sections 5f1e4ca compat: remove unused dev_recursion_level backport 7e4b991 blake2s: remove unused helper 13225fc send: simplify skb_padding with nice macro a1525bf send: account for route-based MTU bbb2fde wg-quick: account for specified fwmark in auto routing mode c452105 qemu: bump default version dbe5223 version: bump snapshot 1d3ef31 chacha20poly1305: put magic constant behind macro cdc164c chacha20poly1305: add self tests from wycheproof 1060e54 curve25519: add self tests from wycheproof 0e1e127 wg-quick.8: fix typo 2b06b8e curve25519: precomp const correctness 8102664 curve25519: memzero in batches 1f54c43 curve25519: use cmov instead of xor for cswap fa5326f curve25519: use precomp implementation instead of sandy2x 9b19328 compat: support OpenSUSE 15 3102d28 compat: silence warning on frankenkernels 8f64c61 compat: stable kernels are now receiving b87b619 62127f9 wg-quick: hide errors on save
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
7c0d711 version: bump snapshot b6a5cc0 contrib: add extract-handshakes kprobe example 37dc953 wg-quick: if resolvconf/run/iface exists, use it 1f9be19 wg-quick: if resolvconf/interface-order exists, use it 4d2d395 noise: align static_identity keys 14395d2 compat: use correct -include path 38c6d8f noise: fix function prototype 302d0c0 global: in gnu code, use un-underscored asm ff4e06b messages: MESSAGE_TOTAL is unused ea81962 crypto: read only after init e35f409 Kconfig: require DST_CACHE explicitly 9d5baf7 Revert "contrib: keygen-html: rewrite in pure javascript" 6e09a46 contrib: keygen-html: rewrite in pure javascript e0af0f4 compat: workaround netlink refcount bug ec65415 contrib: embedded-wg-library: add key generation functions 06099b8 allowedips: fix comment style ce04251 contrib: embedded-wg-library: add ability to add and del interfaces 7403191 queueing: skb_reset: mark as xnet
Changes:
* queueing: skb_reset: mark as xnet
This allows cgroups to classify packets.
* contrib: embedded-wg-library: add ability to add and del interfaces
* contrib: embedded-wg-library: add key generation functions
The embeddable library gains a few extra tricks, for people implementing
plugins for various network managers.
* crypto: read only after init
* allowedips: fix comment style
* messages: MESSAGE_TOTAL is unused
* global: in gnu code, use un-underscored asm
* noise: fix function prototype
Small cleanups.
* compat: workaround netlink refcount bug
An upstream refcounting bug meant that in certain situations it became
impossible to unload the module. So, we work around it in the compat code. The
problem has been fixed in 4.16.
* contrib: keygen-html: rewrite in pure javascript
* Revert "contrib: keygen-html: rewrite in pure javascript"
We nearly moved away from emscripten'ing the fiat32 code, but the resultant
floating point javascript was just too terrifying.
* Kconfig: require DST_CACHE explicitly
Required for certain frankenkernels.
* compat: use correct -include path
Fixes certain out-of-tree build systems.
* noise: align static_identity keys
Gives us better alignment of private keys.
* wg-quick: if resolvconf/interface-order exists, use it
* wg-quick: if resolvconf/run/iface exists, use it
Better compatibility with Debian's resolvconf.
* contrib: add extract-handshakes kprobe example
Small utility for extracting ephemeral key data from the kernel's memory.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (git log --oneline description)
2675814 version: bump snapshot 381d703 qemu: update base versions c3fbd9d curve25519: break more things with more test cases 93fa0d9 curve25519: replace fiat64 with faster hacl64 6177bdd curve25519: replace hacl64 with fiat64 b9bf37d curve25519: verify that specialized basepoint implementations are correct bd3f0d8 tools: dedup secret normalization 1f87434 chacha20poly1305: better buffer alignment 78959ed chacha20poly1305: use existing rol32 function 494cdea tools: fread doesn't change errno ab89bdc device: let udev know what kind of device we are 62e8720 qemu: disable AVX-512 in userland 6342bf7 qemu: disable PIE for compilation e23e451 contrib: keygen-html: share curve25519 implementation with kernel 6b28fa6 tools: share curve25519 implementations with kernel c80cbfa poly1305: add poly-specific self-tests 10a2edf curve25519-fiat32: uninline certain functions
9a93a3d version: bump snapshot 7bc0579 contrib: keygen-html: update curve25519 implementation ffc13a3 tools: import new curve25519 implementations 0ae7356 curve25519: wire up new impls and remove donna f90e36b curve25519: resolve symbol clash between fe types 505bc05 curve25519: import 64-bit hacl-star implementation 8c02050 curve25519: import 32-bit fiat-crypto implementation 96157fd curve25519: modularize implementation 4830fc7 poly1305: remove indirect calls bfd1a5e tools: plug memleak in config error path 09bf49b external-tests: add python implementation b4d5801 wg-quick: ifnames have max len of 15 6fcd86c socket: check for null socket before fishing out sport ddb8270 global: year bump 399d766 receive: treat packet checking as irrelevant for timers
Felix Fietkau [Mon, 30 Apr 2018 12:03:28 +0000 (14:03 +0200)]
kernel: add missing in6_dev_put_clear call to an ipv6 network patch
Fixes "unregister_netdevice: waiting for lo to become free. Usage count = 1"
messages which started appearing since the update to 4.4.103. That
problem was exposed by upstream commit 76da0704507bb ("ipv6: only call
ip6_route_dev_notify() once for NETDEV_UNREGISTER") backported to 4.4.x
branch in 2417da3f4d6bc.
Fixes: 2b664499cd622 ("kernel: bump 4.4 to 4.4.103 for 17.01") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 58f7b5b96c301176d639540df4723c798af2a999)
ar71xx: Ubiquiti Airmax M: add relocate-kernel to invalidate cache
Some Ubiquiti U-boot versions, in particular the "U-Boot 1.1.4.2-s956
(Jun 10 2015 - 10:54:50)" found with AirOS 5.6, do not correctly flush the
caches for the whole kernel address range after decompressing the kernel
image, leading to hard to debug boot failures, depending on kernel version
and configuration.
As a workaround, prepend the relocate-kernels loader, which will invalidate
the caches after moving the kernel to the correct load address.
Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
base-files: /lib/functions.sh: ignore errors in insert_modules
Package postinst will pass even names of builtin modules to insert_modules,
leading to postinst failing with error 255. This has been fixed in master
in r5279, but for lede-17.01 this minimal change is preferable.
mbedtls: change libmbedcrypto.so soversion back to 0
mbedtls changed in version 2.7.0 and 2.7.2 the soversion of the
libmbedcrypto.so library, use the old version again to be able to use
the new library with binaries compiled against the old mbedtls library.
Some binaries got rebuild to for the 2.7.0 release and are now using
libmbedcrypto.so.1, the older ones are still using libmbedcrypto.so.0.
Go back to libmbedcrypto.so.0 and make the system rebuild the binaries
which were rebuild for 2.7.0 again.
This should make the libmbedcrypto.so library be compatible with the old
version shipped with 17.01.
Fixes: 3ca1438ae0 ("mbedtls: update to version 2.7.2") Fixes: f609913b5c ("mbedtls: update to version 2.7.0") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is important fix for flash parsing in some corner cases. In case
of TRX subpartition with rootfs being aligned to the flash block size it
was incorrectly registered twice. Detecting & registering it as a
standalone partition was resulting in an incorrect "firmware" partition
size and possibly broken sysupgrade.
It wasn't noticed before because "rootfs" alignment depends on a kernel
size. It can happen though - depending on the configuration and the
kernel size.
ar71xx: sysupgrade: improve CPE/WBS 210/510 validation, add new metadata offset
Previously, tplink_pharos_check_image() would accept any image with ELF
magic and only non-printable data in the support-list, as in this case the
while-read loop would not run at all. Add the new support-list offset and
ensure an image is only accepted when the model string is actually found.
Switching from kernel 4.4.120 to 4.4.124 introduced a regression in
the genirq code. It was caused by a commit 9d0273bb1c4b6 ("genirq: Use
irqd_get_trigger_type to compare the trigger type for shared IRQs").
On bcm53xx it breaks serial console and results in a flood of:
[ 22.078829] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio)
[ 22.086432] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio)
[ 22.601150] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio)
[ 22.608845] genirq: Flags mismatch irq 18. 00000080 (serial) vs. 00000080 (gpio)
Later in the upstream "linux-4.4.y" branch that commit was reverted and
it was followed by a 4.4.126 release. Until we switch from 4.4.124 to
4.4.126 (or newer), let's backport that reverting commit.
Fixes: bed0ee7cbfaa5 ("Kernel: bump 4.4 to 4.4.124 for 17.01") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Sun, 4 Mar 2018 19:38:00 +0000 (20:38 +0100)]
mbedtls: update to version 2.7.0
This fixes the following security problems:
* CVE-2018-0488: Risk of remote code execution when truncated HMAC is enabled
* CVE-2018-0487: Risk of remote code execution when verifying RSASSA-PSS signatures
This release is also ABI incompatible with the previous one, but it is
API compatible.
Some functions used by a lot of other software was renamed and the old
function names are provided as a static inline now, but they are only
active when deprecated functions are allowed, deactivate the removal of
deprecated functions for now.
Also increase the PKG_RELEASE version to force a rebuild and update of
packages depending on mbedtls to handle the changed ABI.
Stefan Lippers-Hollmann [Sun, 4 Mar 2018 21:57:04 +0000 (22:57 +0100)]
tools/e2fsprogs: fix building on a glibc 2.27 host
The e2fsprogs host build fails on a glibc 2.27 host with
make[6]: Entering directory 'build_dir/host/e2fsprogs-1.43.7/debugfs'
CC create_inode.o
./../misc/create_inode.c:399:18: error: conflicting types for 'copy_file_range'
static errcode_t copy_file_range(ext2_filsys fs, int fd, ext2_file_t e2_file,
^~~~~~~~~~~~~~~
In file included from ./../misc/create_inode.c:19:0:
/usr/include/unistd.h:1110:9: note: previous declaration of 'copy_file_range' was here
ssize_t copy_file_range (int __infd, __off64_t *__pinoff,
^~~~~~~~~~~~~~~
Matthias Schiffer [Mon, 5 Mar 2018 08:13:53 +0000 (09:13 +0100)]
base-files: tune fragment queue thresholds for available system memory
The default fragment low/high thresholds are 3 and 4 MB. On devices with
only 32MB RAM, these settings may lead to OOM when many fragments that
cannot be reassembled are received. Decrease fragment low/high thresholds
to 384 and 512 kB on devices with less than 64 MB RAM.
Matthias Schiffer [Tue, 6 Mar 2018 13:29:46 +0000 (14:29 +0100)]
include/rootfs.mk: retain list of conffiles with CONFIG_CLEAN_IPKG
/usr/lib/opkg/status must not be removed completely, otherwise the
packages' conffile lists will be missing. Replace it with a reduced version
only containing the conffile entries.
Zoltan HERPAI [Sat, 10 Feb 2018 20:19:41 +0000 (21:19 +0100)]
firmware: add microcode package for Intel
Compiling the Intel microcode package results in a
microcode.bin and a microcode-64.bin. As we can
decide based on the subtarget which should be used,
we'll only split the required .bin file with
iucode-tool.
x64 will get the intel-microcode-64.bin
All other variants will get intel-microcode.bin
The microcodes will be updated from preinit via a common
script - that's the earliest place where we can do it.
Zoltan HERPAI [Sun, 11 Feb 2018 11:30:07 +0000 (12:30 +0100)]
tools: add iucode-tool
Add tool to "compile" Intel microcode files. The tool will be
compiled for host (to split the microcode.dat) and for target
(to forcibly reload the microcode if required).
Instead of using the large microcode.bin/microcode-64.bin, the
splitted ucode files (separate for CPU families) will be
installed.
Rafał Miłecki [Tue, 27 Feb 2018 15:44:25 +0000 (16:44 +0100)]
base-files: fix off-by-one in counting seconds for factory reset
There was a mismatch between indicating factory reset and code actually
starting it. After 5 seconds status LED started blinking rapidly letting
user know it's ready to release reset button. In practice button had to
stay pressed for another second in order to relly start the process.
Rafał Miłecki [Mon, 26 Feb 2018 10:33:49 +0000 (11:33 +0100)]
mountd: update to the latest version from 2018-02-26
This significantly improves mountd stability & reliability by:
1) Sending hotplug.d event when appropriate
2) Properly unmounting
3) Handling corner cases when unmounting fails
4) Improving log messages
5f2c419 mount: drop duplicated includes aaf2743 mount: call hotplug-call with ACTION=remove before trying to unmount 97da4ed mount: try lazy unmount if normal one fails 1b62489 mount: create not working symlink when unmounting fails e77dc6d mount: reorder deleting code in the mount_enum_drives() 76766ae mount: rename tmp variables in the mount_add_list() 04b897f mount: drop duplicated rmdir() call from the mount_enum_drives() a27ea3f mount: drop duplicated unlink() call from the mount_dev_del() bf7cc33 mount: fix/improve unmounting log messages 36f9197 mount: fix removing mount point if it's expired ed4270f mount: struct mount: replace "mounted" and "ignore" fileds with a "status" 1af9ca2 mount: change mount_dev_del() argument to struct mount * 7c8fea8 mount: rename /proc/mount parser to mount_update_mount_list() 7aadd1c mount: improve handling mounts table size
Matthias Schiffer [Fri, 23 Feb 2018 15:17:57 +0000 (16:17 +0100)]
perf: restrict libunwind dependency to archs that actually support libunwind
Allow building perf on uncommon targets again.
Depending on the kernel version, not all of these archs will actually use
libunwind in perf. Still, it seems simpler and less error-prone to use the
same list that is defined in the libunwind package.
Koen Vandeputte [Thu, 15 Feb 2018 14:16:03 +0000 (15:16 +0100)]
uqmi: use built-in command for data-link verification
uqmi contains a command for directly querying the modem if there
is a valid data connection, so let's use it.
This avoids the cases were all previous tests are succesful, but the
actual data link is not up for some reasons, leading to states were we
thought the link was up when it actually wasn't ..
Koen Vandeputte [Thu, 15 Feb 2018 14:16:01 +0000 (15:16 +0100)]
uqmi: use general method for state cleaning
Debugging shows that using the general method properly cleans on each
run, while the method specifying the client-ID shows "No effect"
even while in connected state.
Fixes several connectivity issues seen on specific modems.
Alexandru Ardelean [Thu, 15 Feb 2018 14:15:58 +0000 (15:15 +0100)]
net: uqmi: fix blocking in endless loops when unplugging device
If you unplug a QMI device, the /dev/cdc-wdmX device
disappears but uqmi will continue to poll it endlessly.
Then, when you plug it back, you have 2 uqmi processes,
and that's bad, because 2 processes talking QMI to the
same device [and the same time] doesn't seem to work well.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Jo-Philipp Wich [Thu, 15 Feb 2018 09:47:04 +0000 (10:47 +0100)]
ramips: backport mt7530/762x switch fixes
dc7a1e8555 ("ramips: fix reporting effective VLAN ID on MT7621 switches") 341b1427fc ("ramips: properly map pvid for vlans with remapped vid on mt7530/762x switches") bb4002c79d ("ramips: don't clobber vlans with remapped vid on mt7530/762x switches")
David Bauer [Tue, 6 Feb 2018 18:44:36 +0000 (19:44 +0100)]
ar71xx: remove bs-partition ro-flag for UniFi AC
This removes the read-only flag from the bs (bootselect) partition
on UniFi AC devices. This allows to correct the indicator from which
partition the device is booting its kernel from.
See also:
- https://github.com/freifunk-gluon/gluon/issues/1301
- https://bugs.lede-project.org/index.php?do=details&task_id=662
Martin Wetterwald [Thu, 12 Jan 2017 14:06:00 +0000 (15:06 +0100)]
iptables: Fix target TRACE issue
The package kmod-ipt-debug builds the module xt_TRACE, which allows
users to use '-j TRACE' as target in the chain PREROUTING of the table
raw in iptables.
The kernel compilation flag NETFILTER_XT_TARGET_TRACE is also enabled so
that this feature which is implemented deep inside the linux IP stack
(for example in sk_buff) is compiled.
But a strace of iptables -t raw -I PREROUTING -p icmp -j TRACE reveals
that an attempt is made to read /usr/lib/iptables/libxt_TRACE.so, which
fails as this dynamic library is not present on the system.
I created the package iptables-mod-trace which takes care of that, and
target TRACE now works!
Signed-off-by: Martin Wetterwald <martin.wetterwald@corp.ovh.com>
[Jo-Philipp Wich: also remove trace extension from builtin extension list
and depend on kmod-ipt-raw since its required for rules] Signed-off-by: Jo-Philipp Wich <jo@mein.io> Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Darren Tucker [Sat, 20 Jan 2018 06:26:06 +0000 (14:26 +0800)]
curl: fix libcurl/mbedtls async interface
When using mbedtls, curl's nonblocking interface will report a request
as done immediately after the socket is written to and never read from
the connection. This will result in a HTTP status code of 0 and zero
length replies. Cherry-pick the patch from curl 7.53.0 to fix this
(https://github.com/curl/curl/commit/b993d2cc).
Kevin Darbyshire-Bryant [Fri, 19 Jan 2018 17:15:41 +0000 (17:15 +0000)]
dnsmasq: backport dnssec security fix for 17.01
CVE-2017-15107
An interesting problem has turned up in DNSSEC validation. It turns out
that NSEC records expanded from wildcards are allowed, so a domain can
include an NSEC record for *.example.org and an actual query reply could
expand that to anything in example.org and still have it signed by the
signature for the wildcard. So, for example
!.example.org NSEC zz.example.org
is fine.
The problem is that most implementers (your author included, but also
the Google public DNS people, powerdns and Unbound) then took that
record to prove the nothing exists between !.example.org and
zz.example.org, whereas in fact it only provides that proof between
*.example.org and zz.example.org.
This gives an attacker a way to prove that anything between
!.example.org and *.example.org doesn't exists, when it may well do so.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Hans Dedecker [Wed, 17 Jan 2018 12:57:30 +0000 (13:57 +0100)]
mountd: bump to git HEAD version
c54e5c6 mount: check if block was mounted before cleaning it up e31565a mount: remove directory if mounting fails 0f4f20b mount: call hotplug mount scripts only on success
Kevin Darbyshire-Bryant [Mon, 8 Jan 2018 13:00:07 +0000 (13:00 +0000)]
kmod-sched-cake: bump to latest cake bake for 17.01
More important bug fix:
402f05c Use full-rate mtu_time in all tins. Fixes an issue where some
cake tins experienced excessive latency since 49776da (dynamically
adjust target)
Minor bug fixes:
31277c2 Avoid unsigned comparison against zero. Fix compiler warning,
no known impact. 8cf5278 ack_filter: fix TCP flag check. A very contrived case may have
lead to dropping a SYN packet that should not be dropped.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Stijn Segers [Sat, 13 Jan 2018 16:18:21 +0000 (17:18 +0100)]
ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
The Netgear WNR2000v4 does not have a USB port. Hence, including USB packages into the default images is useless.
It looks like the WNR2000v4 definition in master is OK.
v2 fixes the silly typo in the patch title (WNR2000v4 instead of WNR200v4)
Jo-Philipp Wich [Wed, 10 Jan 2018 19:17:48 +0000 (20:17 +0100)]
build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
When generating per-device rootfs directories, the ./etc/opkg/ directory
is moved away prior to calling opkg install, opkg remove and rootfs_prepare.
After the opkg invocations and the rootfs_prepare macro call, the saved opkg
config directory is supposed to be moved back to its previous ./etc/opkg
location.
The mv command however can fail to properly restore the directory under
certain circumstances, e.g. when the prior opkg or files/ overlay copy
operations caused a new ./etc/opkg/ directory to be created.
In this case, the backed up directory (named target-dir-$hash.opkg) will be
moved into the preexisting ./etc/opkg/ directory instead, causing the opkg
configuration to be located in a wrong path on the final rootfs, e.g. in
/etc/opkg/target-dir-$hash.opkg/distfeeds.conf instead of
/etc/opkg/distfeeds.conf.
Solve this problem by replacing the naive "mv" command with a recursive
"cp -T" invocation which causes the backed up directory tree to get merged
with the destination directory in case it already exists.
Also perform the rootfs_prepare macro call after restoring the opkg
configuration, to allow users to override it again by using the files/
overlay mechanism.
Chuanhong Guo [Fri, 29 Dec 2017 04:35:32 +0000 (12:35 +0800)]
ramips: fix lenovo newifi-y1 switch and LED config
There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on
port4.
Use a standalone switch configuration to match this and use the switch
trigger so that LAN LED could indicate the connetction status for both
lan ports correctly.
This patch also drop the internet led configuration, because there is a
WAN led for port4 and eth0.2 isn't always used as WAN.
projects / users / dwmw2 / openwrt.git / log