Algorithms not compatible with mcryptd could be spawned by mcryptd
with a direct crypto_alloc_tfm invocation using a "mcryptd(alg)" name
construct. This causes mcryptd to crash the kernel if an arbitrary
"alg" is incompatible and not intended to be used with mcryptd. It is
an issue if AF_ALG tries to spawn mcryptd(alg) to expose it externally.
But such algorithms must be used internally and not be exposed.
We added a check to enforce that only internal algorithms are allowed
with mcryptd at the time mcryptd is spawning an algorithm.
Link: http://marc.info/?l=linux-crypto-vger&m=148063683310477&w=2 Cc: stable@vger.kernel.org Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 48a992727d82cb7db076fa15d372178743b1f4cd) Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Reviewed-by: Jack Vogel <jack.vogel@oracle.com>
Ngai-Mint Kwan [Wed, 2 Nov 2016 23:44:47 +0000 (16:44 -0700)]
fm10k: do not clear global mailbox interrupt bits
Partially revert commit 5e93cbadd3e9 ("fm10k: Reset mailbox global
interrupts", 2016-06-07)
The register bits related to this commit are now solely being handled by
the IES API. Recent changes in the IES API will allow an automatic
recovery from improper handling of these bits.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f0524955177c3e5cea89ceec56ad9d538530fe4f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Ngai-Mint Kwan [Wed, 2 Nov 2016 23:44:46 +0000 (16:44 -0700)]
fm10k: request reset when mbx->state changes
Multiple IES API resets can cause a race condition where the mailbox
interrupt request bits can be cleared before being handled. This can
leave certain mailbox messages from the PF to be untreated and the PF
will enter in some inactive state. If this situation occurs, the IES API
will initiate a mailbox version reset which, then, trigger a mailbox
state change. Once this mailbox transition occurs (from OPEN to CONNECT
state), a request for reset will be returned.
This ensures that PF will undergo a reset whenever IES API encounters an
unknown global mailbox interrupt event or whenever the IES API
terminates.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 2f3fc1e6200309ccf87f61dea56e57e563c4f800) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 25 Aug 2016 21:06:54 +0000 (14:06 -0700)]
fm10k: use generic ethtool_op_get_ts_info callback
This generic callback is for drivers which have software Tx timestamp
support enabled. Without this, PTP applications requesting software
timestamps may complain that the requested mode is not supported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit bab02a69296682881cae280587618978c357e26e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 9 Aug 2016 00:08:19 +0000 (17:08 -0700)]
fm10k: don't re-map queues when a mailbox message suffices
When the PF assigns a new MAC address to a VF it uses the base address
registers to store the MAC address. This allows a VF which loads after
this setup the ability to get the initial address without having to wait
for a mailbox message. Unfortunately to do this, the PF must take queue
ownership away from the VF, which can cause fault errors when there is
already an active VF driver.
This queue ownership assignment causes race condition between the PF and
the VF such that potentially a VF can cause FUM fault errors due to
normal PF/VF driver behavior.
It is not safe to simply allow the PF to write the base address
registers without taking queue ownership back as the PF must also
disable the queues, and this would impact active VF use. The current
code is safe because the queue ownership will prevent the VF from
actually writing but does trigger the FUM fault.
We can do better by simply avoiding the register write process when
a mailbox message suffices. If the message can be sent over the mailbox,
then we will not perform the queue ownership assignment and we won't
update the base address to be the same as the MAC address.
We do still have to write the TXQCTL registers in order to update the
VID of the queue. This is necessary because the TXQCTL register is
read-only from the VF, and thus the VF cannot do this for itself. This
register does not need to wait for the Tx queue to be disabled and is
safe for the PF to write during normal VF operation, so we move this
write to the top of the function above the mailbox message. Without
this, the TXQCTL register would be misconfigured and cause the VF to Tx
hang.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 325782a173d1858bb67a827905e264cd128241d0) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 23 Jun 2016 20:54:01 +0000 (13:54 -0700)]
fm10k: don't try to stop queues if we've lost hw_addr
In the event of a surprise remove, we expect the driver to go down,
which includes calling .stop_hw(). However, this function will return an
error because the queues won't appear to cleanly disable. Prevent this
and avoid the unnecessary checks by just returning when
FM10K_REMOVED(hw->hw_addr) is true.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5f45c83024c49f71e50cf8156b165f11d2ab35a9) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 23 Jun 2016 20:31:01 +0000 (13:31 -0700)]
fm10k: don't continue probe if PCI device not in normal IO state
In the event of an uncorrectable AER error occurring when the driver has
not loaded, the recovery routines are not done. This is done because
future loads of the driver may not be aware of the IO state and may not
be able to recover at all. In this case, when we next load the driver it
fails due to what appears to be a surprise remove event. Instead, add
a check to ensure that the device is in the normal IO state before
continuing to probe. This allows us to give a more descriptive message
of what is wrong.
Without this change, the driver will attempt to probe up to our first
call of .reset_hw() which will be unable to read registers and act as if
a surprise remove event occurred.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 18095937cb1c66b8ff944de02cf04d1497008352) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 20 Jun 2016 17:39:32 +0000 (10:39 -0700)]
fm10k: NAPI polling routine must return actual work done
When fm10k_poll fully cleans rings it returns 0. This is incorrect as it
messes up the budget accounting in the core NAPI code. Fix this by
returning actual work done, capped at budget - 1 since the core doesn't
expect a return of the full budget when the driver modifies the NAPI
status.
Cc: Paolo Abeni <pabeni@redhat.com> Cc: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e5fbfb78641ff0c5139ae665289ed9f91524265e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 17 Jun 2016 23:21:11 +0000 (16:21 -0700)]
fm10k: prefer READ_ONCE instead of ACCESS_ONCE
While technically not needed, as all our uses of ACCESS_ONCE are scalar
types, we already use READ_ONCE in a few places, and for code
readability we can swap all the uses of the older ACCESS_ONCE into
READ_ONCE.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit ce4dad2ce231aa5258ddfc98f8a80d958643c014) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 9 Jun 2016 21:56:05 +0000 (14:56 -0700)]
fm10k: use software values when checking for Tx hangs in hot path
A previous patch added support to check for hardware Tx pending in the
fm10k_down routine. This support was intended to ensure that we
accurately check what the hardware state is. However, checking for Tx
hangs in this manor during the hotpath results in a large performance
hit. Avoid this by making the hotpath check use the SW counters instead.
Fixes: a0f53cf49cb0 ("fm10k: use actual hardware registers when checking for pending Tx", 2016-06-08) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5b9e4432db038eefcafe2be468e3adaf2edbbe91) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 9 Jun 2016 19:02:03 +0000 (12:02 -0700)]
fm10k: fix PCI device enable_cnt leak in .io_slot_reset
A previous patch removed the pci_disable_device() call in
.io_error_detected. This call corresponded to a pci_enable_device_mem()
call within .io_slot_reset handler. Change the call here to
a pci_reenable_device() so that it does not increment and leak the
enable_cnt reference count for the device. Without this change, VF
devices may fail during an unbind/bind, and we'll never zero the
reference counter for the pci_dev structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e59a393d089d08a4622de07f941dd3629fcaec6a) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:09:01 +0000 (16:09 -0700)]
fm10k: return proper error code when pci_enable_msix_range fails
The pci_enable_msix_range() function returns a positive value of the
number of allocated vectors if it succeeds. On failure it returns
a negative error code. Return this code properly so that the error
message printed by the driver will show the actual error code instead of
being masked by -ENOMEM.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 30e23b711c7b92dea664e61c3eb4b2cdc4b262e9) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:09:00 +0000 (16:09 -0700)]
fm10k: force link to remain down for at least a second on resume events
When we resume from an AER recovery with many active VFs, the PF sees
many spurious link up and link down events. Prevent this by delaying
link down for at least one second after the resume event.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0356b23bcc347d4020f2883ad083ab54e573e214) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:59 +0000 (16:08 -0700)]
fm10k: implement request_lport_map pointer
If the fm10k interface is brought up, but the switch manager software is
not running, the driver will continuously request the lport map every
few seconds in the base driver watchdog routine. Eventually after
several minutes the switch mailbox Tx fifo will fill up and the mailbox
will timeout, resulting in a reset. This reset will appear as if for no
reason, and occurs regularly every few minutes until the switch manager
software is loaded.
Prevent this from happening by only requesting the lport map after we've
verified the switch mailbox is tx_ready. In order to simplify code logic
and reduce code duplication, implement this as a new function pointer
"mac.ops.request_lport_map" which the VF will not implement. Otherwise,
we have to duplicate the tx_ready check outside of
fm10k_get_host_state_generic, or re-implement most of
fm10k_get_host_state_generic in the pf version.
The resulting code is simpler and easier to understand, and prevents the
PF from continuously requesting lport map and filling the Tx fifo of
a switch mailbox that isn't ready.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0afd20e5573c4aa976f1b935b6df73592b46ded5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:58 +0000 (16:08 -0700)]
fm10k: check if PCIe link is restored
Sometimes, a VF driver will lose PCIe address access, such as due to
a PF FLR event. In fm10k_detach_subtask, poll and check whether the
PCIe register space is active again and restore the device when it has.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 9d7dbf0604d37f8cae0c6d184a646037636a8b30) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:57 +0000 (16:08 -0700)]
fm10k: enable bus master after every reset
If an FLR occurs, VF devices will be knocked out of bus master mode, and
the driver will be unable to recover from the reset properly, resulting
in malicious driver events and an infinite reset loop. In the normal
case, the bus master mode will already be enabled and this call will
essentially be a no-op. Since we're doing this every reset, it is
possible we could remove the other calls to pci_set_master() but it
seems not harmful to just leave them in place.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0d63a8f50e7a7810b0631cd8ea66d44dafb215e6) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:55 +0000 (16:08 -0700)]
fm10k: implement reset_notify handler for PCIe FLR events
When a function level PCI reset is triggered using sysfs, it calls the
driver's .reset_notify error handler. Implement a handler based on the
now split fm10k_prepare_for_reset and fm10k_handle_reset functions, so
that we fully reset the driver when the PCI function level reset occurs.
This also ensures the reset is handled in a clean way by first disabling
all the driver bits first and then restoring them after the function
reset. Previously the stack simply performed a blind function reset and
our driver didn't take any part in the process.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0593186a17d8427804be162a724a1576367e4d4c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:53 +0000 (16:08 -0700)]
fm10k: implement prepare_suspend and handle_resume
Implement fm10k_prepare_suspend and fm10k_handle_resume functions which
abstract around the now existing fm10k_prepare_for_reset and
fm10k_handle_reset. The new functions also handle stopping the service
task, which is something that the original re-init flow does not need.
Every other location that does a suspend/resume type flow is expected to
use these functions, because otherwise they may have conflicts with the
running watchdog routines. This also has the effect of preventing
possible surprise remove events during handling of FLR events and PCIe
errors.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit dc4b76c0fe1753940b15413ae5fb9829552824ec) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:52 +0000 (16:08 -0700)]
fm10k: split fm10k_reinit into two functions
There are several flows in the driver which perform the similar function
of tearing down software and restoring software to recover from certain
errors or PCIe events, including:
In addition, we want to implement a .reset_notify() handler as well
which will also perform similar function.
Rework how the driver codes reset and resume flows by separating out the
reinit logic into two functions "fm10k_prepare_for_reset" and
"fm10k_handle_reset". This first step will allow us to re-use this
functionality in the similar blocks of code instead of re-coding the
same sequence of events slightly different.
The end result should be more maintainable and correct, fixing several
inconsistencies with the work flow.
The new functions expect to take the rtnl_lock() themselves, and it does
have the unfortunate side effect of having the reinit flow take then
release then take the rtnl_lock. However, this minor downside is
out weighted by the benefits of code reduction and reducing needless
difference between these flows.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 40de1fad417cb7c6958c214ec1f4c8c29101cb7f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:51 +0000 (16:08 -0700)]
fm10k: wait for queues to drain if stop_hw() fails once
It turns out that sometimes during a reset the Tx queues will be
temporarily stuck longer than .stop_hw() expects. Work around this issue
by attempting to .stop_hw() first. If it tails, wait a number of
attempts until the Tx queues appear to be drained. After this, attempt
stop_hw() again. This ensures that we avoid waiting if we don't need to,
such as during the first initialization of a VF, and give the proper
amount of time necessary to recover from most situations. It is possible
that the hardware is actually stuck. For PFs, this is usually fixed by
a datapath reset. Unfortunately the VF cannot request a similar reset
for itself.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 94877768cfaa99f7b3757f29632faa5945f18872) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:50 +0000 (16:08 -0700)]
fm10k: only warn when stop_hw fails with FM10K_ERR_REQUESTS_PENDING
When stop_hw() routine fails with FM10K_ERR_REQUESTS_PENDING, this
indicates that the Tx or Rx queues did not shutdown within the time
limit. Print a more suitable message at the dev_info level instead of
dev_err.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 106ca42356b49a1ae6199e6630ec40df82ff7421) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:48 +0000 (16:08 -0700)]
fm10k: perform data path reset even when switch is not ready
A while ago, an additional check for the switch being ready was added to
reset_hw. A recent refactor accidentally made this check return an error
code on failure which caused fm10k_probe to fail when the switch wasn't
brought up first. The original reasoning for the check was to prevent
additional data path reset when the fabric wasn't ready yet. However,
there isn't a compelling reason to keep the check, as the data path
reset will restore hardware to a known good state. Remove the check and
perform the data path reset regardless of the switch manager state.
An alternative fix is to return FM10K_SUCCESS instead, and bypass the
actual data path reset. This should be fine as we will perform
a reset_hw once the switch is active. However, since data path reset
will reset many parts of the hardware it seems better to just perform
the reset regardless of switch state.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 892c9e0872bea23ac2dc774ea950e6526f157bd5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 7 Jun 2016 23:08:47 +0000 (16:08 -0700)]
fm10k: don't stop reset due to FM10K_ERR_REQUESTS_PENDING
Don't report FM10K_ERR_REQUESTS_PENDING when we fail to disable queues
within the timeout. This can occur due to a hardware Tx hang, or when
the switch ethernet fabric is resetting while we are transmitting
traffic. It can sometimes take up to 500ms before the Tx DMA engine
gives up. Instead, just skip the DMA engine check and perform
a data-path reset anyways. Add a statistic counter to keep track of the
number of resets occurring while we have pending DMA on the rings.
In order to prevent having to re-assign err to 0, re-order the
last few items of the reset_hw_pf function so that we don't perform
"return err" at the end.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit ce33624f37f43267e5fa0810a058807d268142fb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Ngai-Mint Kwan [Tue, 7 Jun 2016 23:08:46 +0000 (16:08 -0700)]
fm10k: Reset mailbox global interrupts
When a data path reset is initiated, write control to the PCIE_GMBX is
yanked from the switch manager. The switch manager writes to this
register to clear mailbox global interrupt bits as part of its mailbox
interrupt handling routine. When the device recovers from the data path
reset and these bits are not cleared, it will prevent future mailbox
global interrupts from being triggered. Upon confirming that the device
has exited from a data path reset, clear these bits to ensure the proper
functioning of the mailbox global interrupt.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5e93cbadd3e9db342e48582178b7d241097f51c4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Also prevent updating stats while the interface is down. If we're
already updating stats, just return doing nothing. When we take the
device down, block stat updates until we come back up. This ensures that
we avoid tearing down rings when we're updating statistics, and prevents
updating statistics until we're up.
We can't re-use the __FM10K_DOWN for this because it wouldn't prevent
multiple threads from accessing statistics. Neither does it prevent the
case where we start updating stats and then start going down in another
thread.
The fm10k_get_stats64 is except from this, because it has a completely
different flow which does not suffer from the same issues as
fm10k_update_stats might.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 9d73edee5900baff47887b36e9b97f45a7d13b6d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 3 Jun 2016 22:42:12 +0000 (15:42 -0700)]
fm10k: avoid possible null pointer dereference in fm10k_update_stats
It's currently possible for fm10k_update_stats to be called during the
window when we go down and the rings are removed. This can result in
a null pointer dereference. In fm10k_get_stats64 we work around this by
using ACCESS_ONCE and a null pointer check inside the loop. Use this
same flow in the fm10k_update_stats to avoid the potential null pointer.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit b624714bc90064eeefd9ba7564e90865eef00421) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 3 Jun 2016 22:42:11 +0000 (15:42 -0700)]
fm10k: no need to continue in fm10k_down if __FM10K_DOWN already set
Return early from fm10k_down() when we are already down, since that
means another thread is either already finished or has started going
down, so shouldn't conflict with them.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1b00c6c064302354fce71d7c363945fe9e967f7c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
A dedicated workqueue has been used since the workitem (viz
fm10k_service_task, which manages and runs other subtasks) is involved in
normal device operation and requires forward progress under memory
pressure.
create_workqueue has been replaced with alloc_workqueue with max_active
as 0 since there is no need for throttling the number of active work
items.
Since network devices may be used in memory reclaim path,
WQ_MEM_RECLAIM has been set to guarantee forward progress.
flush_workqueue is unnecessary since destroy_workqueue() itself calls
drain_workqueue() which flushes repeatedly till the workqueue
becomes empty. Hence the call to flush_workqueue() has been dropped.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0a38c17a21a0965b4853211afa1d3e85428e6170) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 18 Apr 2016 22:45:00 +0000 (15:45 -0700)]
fm10k: fix incorrect index calculation in fm10k_write_reta
The index calculated when looping through the indir array passed to
fm10k_write_reta was incorrectly calculated as the first part i needs to
be multiplied by 4.
Fixes: 0cfea7a65738 ("fm10k: fix possible null pointer deref after kcalloc", 2016-04-13) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 34875887f360d7bd0b7f0a89f7c6d65eca616ee3) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Fri, 15 Apr 2016 17:00:46 +0000 (13:00 -0400)]
fm10k: Align Rx buffers to 512B blocks
While reviewing the i40e driver changes to support page based receive I
realized that I had overlooked the fact that the fm10k hardware required a
512 byte alignment for Rx buffers. This patch is meant to address that by
changing the alignment for Rx buffers to 512 bytes instead of allowing it
to be L1 cache aligned.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit fb5677aa26a2ae2c94ffb889ab6802a42bf54b0b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 14 Apr 2016 20:17:27 +0000 (13:17 -0700)]
fm10k: don't use BIT() macro where the value isn't a bitmask
The FM10K_MAX_DATA_PER_TXD is really just using a bitshift as a power of
2 operation in an efficient manner. We shouldn't represent this as a BIT()
because that obscures the intention of the operation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 124579de462e6c232c4c321c3ec1ed81964cf78b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Check for and handle IPv6 extended headers so that Tx checksum offload
can be done. Also use skb_checksum_help for unexpected cases. This was
originally discovered in ixgbe.
Reported-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit dc1b4c2b88b976a7882922e55666b20e28477c57) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 7 Apr 2016 15:21:21 +0000 (08:21 -0700)]
fm10k: consistently use Intel(R) for driver names
Update every header file and other locations to consistently use
Intel(R) instead of just Intel. Also update copyright year of files
which we modified.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 86641094678a90af278d1f44c0e47f817c9ba46e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 7 Apr 2016 15:21:20 +0000 (08:21 -0700)]
fm10k: fix possible null pointer deref after kcalloc
When writing a new default redirection table, we needed to populate
a new RSS table using ethtool_rxfh_indir_default. We populated this
table into a region of memory allocated using kcalloc, but never checked
this for NULL. Fix this by moving the default table generation into
fm10k_write_reta. If this function is passed a table, use it. Otherwise,
generate the default table using ethtool_rxfh_indir_default, 4 at at
time.
Fixes: 0ea7fae44094 ("fm10k: use ethtool_rxfh_indir_default for default redirection table") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 540a5d859010a239a99aba02a9fed7b255c0033e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Deleting lport when multicast mode is configured to
FM10K_XCAST_MODE_ALLMULTI or FM10K_XCAST_MODE_PROMISC will result in
generating orphaned multicast-group entries in the switch manager.
Before deleting the lport, reset multicast mode to FM10K_XCAST_MODE_NONE
to flush out these multicast-group entries.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 11ec36a974f59c99e8a4ff7040026569a43ab567) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
The original comment may be read incorrectly as referring to checking
the *entire* length is zero. However, it merely checks only the reserved
bits of both length and reserved in a small amount of code. Update the
comment to indicate this is a clever trick and clearly spell out that it
only checks the reserve bits.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit fb6515c8f03bbfdc99cff156becd5e14df1dd601) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 23:17:37 +0000 (16:17 -0700)]
fm10k: use different name than FM10K_VLAN_CLEAR for override bit
Use a new #define FM10K_VLAN_OVERRIDE even though we're using the exact
same bit. The reason for this is clarity in the code, otherwise you can
read FM10K_VLAN_CLEAR and think it should be removed. Also add a comment
explaining why the FM10K_VLAN_OVERRIDE bit is set.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5c69df8a33408c82ac633c521be0acf71a690d43) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 23:17:36 +0000 (16:17 -0700)]
fm10k: use 8bit notation instead of 10bit notation for diagram
The diagram represents bit layout of the multi-bit VLAN update message
format. Typically these diagrams are drawn using some power of 2 as the
base, to more easily grasp where fields split. Although the numbers
above can make it somewhat easy to understand which bit you're looking
at, it makes the break points not line up. Re-draw the numbers using
base 8, and mark the bit values every 8 bits at the top. This should
make it more easy to grasp the table quickly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit d057d9a9446636293b4884d1a0da6ad5a7ef4e13) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 23:17:35 +0000 (16:17 -0700)]
fm10k: fix documentation of fm10k_tlv_parse_attr
fm10k_tlv_parse_attr is supposed to return FM10K_NOT_IMPLEMENTED for any
TLV who's attribute id lies outside the range of results. It does not do
this today. In addition, the documentation does not indicate that other
attributes which are not implemented for a given TLV will be silently
ignored. Fix this. Clean up the logic so that we don't rely on the fact
that FM10K_NOT_IMPLEMENTED is greater than zero, as this can easily
cause confusion.
A future extension could look into some way of reporting unknown TLVs
in order to make issues more easily discoverable. We can't just return
FM10K_NOT_IMPLEMENTED here because we don't want to drop the entire
message if it has an unknown TLV.
While here, update the copyright year.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 4e160f2a59cec8f705583edfaa11ce5f3b3ef4a6) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 23:17:34 +0000 (16:17 -0700)]
fm10k: do not disable PCI device in fm10k_io_error_detected
fm10k_io_error_detected() does not need to call pci_disable_device(). In
the cases where the reset needs to occur, the stack flow will result in
calling fm10k_remove() which already disables the PCI device. If we
leave the pci_disable_device(), we result in a warning about disabling
an already disabled device.
Many PCI drivers do call pci_disable_device() in their .error_detected()
routines, but it does not appear to be required. In addition, these
drivers have a check "is_pci_enabled()" call in their remove routines,
which is how they chose to handle the duplicate device disable.
This seems incorrect, since the PCI device structure is reference
counted. It is very possible that the reference count for the PCI device
could be greater than 1. In this case, you would remove the PCI device
within the error_detected routine, reducing count to 1, then remove it
again in the remove function, reducing it to zero. This would result in
yet another disable somewhere else failing. Thus, we shouldn't be using
is_pci_enabled() to check for this issue. Instead, just remove the
extraneous pci_device_disable() found within the error_detected routine.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3417415c3a86d6bae8bfee495ce634f4d24e16b8) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 23:17:33 +0000 (16:17 -0700)]
fm10k: correctly handle LPORT_MAP error
Currently, any error responses from the switch manager after an
LPORT_MAP request are silently ignored. At most the mailbox message will
be reported as an error. This can result in unexpected behavior when the
switch manager has configured a port with zero bandwidth. Add support
for reading the fm10k_swapi_error structure from LPORT_MAP responses.
If the message contains the necessary TLV and has a non-zero error code,
report link down, clear the dglort_map, and delay the next
get_host_state call by a reasonable delay. Also log an error message
indicating that the LPORT_MAP request failed.
The delay ensures preventing an interrupt storm on the switch manager,
and reduces the number of mailbox messages we send in this scenario
drastically.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit a7a7783adabc3cc7599f7dbf97fcc3b0d44087b7) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Multicast mode checking is no longer a requirement to perform unicast
and multicast address syncs. Specifically, a device operating in
promiscuous and/or all multicast mode is not excluded. The issue occurs
when the netdev is pre-configured to either multicast mode and is
enabled for the first time. The multicast-group table in the Switch
Manager will be missing obvious multicast entries associated to this
netdev.
Changes were also made to disallow unicast and multicast syncs with
VLAN 0. The Switch Manager considers VLAN 0 to be an invalid entry.
Requests with VLAN 0 by the netdev are only generated when the driver is
freshly installed and the default VID is not set.
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 8998763a7b57583ef2e07f68ea6a7d05bcfc1cfa) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 11 Mar 2016 17:52:32 +0000 (09:52 -0800)]
fm10k: prevent RCU issues during AER events
During an AER action response, we were calling fm10k_close without
holding the rtnl_lock() which could lead to possible RCU warnings being
produced due to 64bit stat updates among other causes. Similarly, we
need rtnl_lock() around fm10k_open during fm10k_io_resume. Follow the
same pattern elsewhere in the driver and protect the entire open/close
sequence.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1e4c32f3ede19bdb738aec2cc3cf69439d7b9310) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 4 Mar 2016 23:37:48 +0000 (15:37 -0800)]
fm10k: remove debug-statistics support
This change fixes an (ab)use of the ethtool stats API, which could
result in corrupt memory or misleading stat output. The ethtool stats
API is not robust enough to handle varying number of statistics due to
how it requests the size and allocates memory. Remove the poorly conceived
support originally added for extra debug statistics. In the future,
a new stats API may open up the ability to display these statistics.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3ef2f563267892230681b1b8890d8f759d39e64d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 1 Apr 2016 18:15:09 +0000 (11:15 -0700)]
fm10k: add helper functions to set strings and data for ethtool stats
Reduce duplicate code and the amount of indentation by adding
fm10k_add_stat_strings and fm10k_add_ethtool_stats functions which help
add fm10k_stat structures to the ethtool stats callbacks. This helps
increase ease of use for future stat additions, and increases code
readability.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 09401ae25191039f4aa45c13718595f550745c68) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 31 Mar 2016 16:52:30 +0000 (09:52 -0700)]
fm10k: fix multi-bit VLAN update requests from VF
The VF uses a multi-bit update request to clear unused VLANs whenever it
resets. However, an accident in a previous refector broke multi-bit
updates for VFs, due to misreading a comment in fm10k_vf.c and
attempting to reduce code duplication. The problem occurs because
a multi-bit request has a non-zero length, and the PF would simply drop
any request with the upper 16 bits set.
We can't simply remove the check of the upper 16 bits and the call to
fm10k_iov_select vid, because this would remove the checks for default
VID and for ensuring no other VLANs can be enabled except pf_vid when it
has been set. To resolve that issue, this revision uses the
iov_select_vid when we have a single-bit update, and denies any
multi-bit update when the VLAN was administratively set by the PF. This
should be ok since the PF properly updates VLAN_TABLE when it assigns
the PF vid. This ensures that requests to add or remove the PF vid work
as expected, but a rogue VF could not use the multi-bit update as
a loophole to attempt receiving traffic on other VLANs.
Reported-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f808c5dbcdc393be8e9f676c61baac6a3db382c1) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 17 Feb 2016 00:19:24 +0000 (16:19 -0800)]
fm10k: use ethtool_rxfh_indir_default for default redirection table
The fm10k driver used its own code for generating a default indirection
table on device load, which was not the same as the default generated by
ethtool when indir_size of 0 is passed to SRXFH. Take advantage of
ethtool_rxfh_indir_default() and simplify code to write the redirection
table to reduce some code duplication.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0ea7fae44094b4ca06ea68105457a7dc64041bd3) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Wed, 10 Feb 2016 22:45:50 +0000 (14:45 -0800)]
fm10k: correctly clean up when init_queueing_scheme fails
Fix a kernel panic that occurs during surprise removal. Clear the
interface queue counts upon fm10k_init_msix_capability failure. This
prevents further code (fm10k_update_stats etc.) from attempting to
access unallocated queue vector or ring memory.
Bruce Allan [Wed, 10 Feb 2016 22:45:47 +0000 (14:45 -0800)]
fm10k: prevent possibly uninitialized variable
If 'attr_flag < (1 << (2 * FM10K_TEST_MSG_NESTED))' is ever false, err
will be used uninitialized.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit c4114e3db6429c665adc3db871685c474a467efe) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 5 Feb 2016 18:43:08 +0000 (10:43 -0800)]
fm10k: add helper functions to set strings and data for ethtool stats
Reduce duplicate code and the amount of indentation by adding
fm10k_add_stat_strings and fm10k_add_ethtool_stats functions which help
add fm10k_stat structures to the ethtool stats callbacks. This helps
increase ease of use for future stat additions, and increases code
readability. Skip handling of the per-queue stats as these will be
reworked in a following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit d2e0721b18f320232dc36a0e4cc7beb620e8c9bd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 4 Feb 2016 18:47:58 +0000 (10:47 -0800)]
fm10k: free MBX IRQ before clearing interrupt scheme
During fm10k_io_error_detected we were clearing the interrupt scheme
before we freed the MBX IRQ. This causes a kernel panic because the MBX
IRQ are assigned after MSI-X initialization. Clearing the interrupt
scheme results in removing the MSI-X entry table. Fix this by freeing
the MBX IRQ before we clear the interrupt scheme, as we do elsewhere in
the driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit c8ed563bebeabbf0b1085b52916dd2fb6e219276) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 4 Feb 2016 18:47:57 +0000 (10:47 -0800)]
fm10k: print error message when stop_hw fails
fm10k_stop_hw_generic calls fm10k_disable_queues_generic, which may
return an error code indicating that the queues were not stopped within
the time limit. Notify the user by displaying a message in the kernel
message ring, in a similar way to how we notify the user when reset_hw
fails. There isn't much we can do to recover from this error, so
currently nothing else is done.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 61e0217e83353cf895f8b2d0a187804171d119ca) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 4 Feb 2016 18:47:56 +0000 (10:47 -0800)]
fm10k: base queue scheme covered by RSS
In fm10k_set_num_queues, we previously assigned the base template. This
would always be overwritten by either fm10k_set_qos_queues or
fm10k_set_rss_queues. In either case, we don't need the base values, so
we can just remove them.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit b3525696adba1ecddff3d667680461cc533e63a4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 4 Feb 2016 18:47:55 +0000 (10:47 -0800)]
fm10k: don't initialize service task until later in probe
Delay initialization of the service timer and service task until late
probe. If we don't wait, failures in probe do not properly cleanup the
service timer or service task items, which results in the kernel panic
below, potentially freezing the whole system. In addition, ensure that
the SERVICE_DISABLE bit is set before we request the MBX IRQ since the
MBX interrupt attempts to schedule the service task otherwise. This
prevents a similar trace from occurring after this change.
We didn't notice this issue before because probe almost always completes
successfully. I discovered it due to a mis-ordered mailbox handler
array, which resulted in the following failure when requesting mailbox
interrupt.
Jacob Keller [Thu, 4 Feb 2016 18:47:54 +0000 (10:47 -0800)]
fm10k: prevent null pointer dereference of msix_entries table
According to the C standard dereferencing a variable before it is
checked invokes undefined behavior, and thus compilers are free to
assume the check for NULL isn't necessary. Prevent this by re-ordering
the NULL check of msix_entries in fm10k_free_mbx_irq.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit de66c610a6adade32bf955f67b4f4f4aaeeeff85) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 29 Dec 2015 02:00:30 +0000 (18:00 -0800)]
fm10k: use ether_addr_copy to copy MAC address
Cleanup the remaining instances of using memcpy() instead of the preferred
ether_addr_copy().
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 11c49f79b294081010f7e13a95c6b40c4d36b1de) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1905add427cdee1b52380241574ab1339b1df413) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 22 Dec 2015 22:55:20 +0000 (14:55 -0800)]
fm10k: demote BUG_ON() to WARN_ON() where appropriate
We don't need to crash the kernel in this instance so just warn about the
condition and play on.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 838e6102920a288a88f5bba10784ab10b2f2eb3e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 22 Dec 2015 21:43:49 +0000 (13:43 -0800)]
fm10k: cleanup remaining right-bit-shifted 1
Use BIT() macro instead.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit fcdb0a9951d8a5edfc47e89a7fe62457c25e18c4) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 22 Dec 2015 21:43:44 +0000 (13:43 -0800)]
fm10k: Move constants to the right of binary operators
The semantic patch that makes this change is available
in scripts/coccinelle/misc/compare_const_fl.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 1aab144c507a9849d5b4557d6d78db185ceaef37) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 9 Dec 2015 01:20:49 +0000 (17:20 -0800)]
fm10k: IS_ENABLED() is not appropriate for boolean kconfig option
Tri-states need 'if IS_ENABLED()', booleans should use 'ifdef'.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 0d722ec8bf46cb6547d10e8c5d9b8b6498bc7f97) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 9 Dec 2015 01:20:44 +0000 (17:20 -0800)]
fm10k: cleanup mailbox code comments etc
Cleanup a number of issues with function header comments, lower-case
acronyms (i.e. FIFO, TLV), duplicate comments and a stubbed-out header
comment for fm10k_sm_mbx_init.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f632fed30f8e0c1b5c9de209f00145f516e7ad37) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:51:11 +0000 (15:51 -0800)]
fm10k: use true/false for boolean get_host_state
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f355bb51794af64ef583c259469a778e606d95bb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:51:04 +0000 (15:51 -0800)]
fm10k: remove unused struct element
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e6f244d484793e0ce80101eb4a523ff08ad73172) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:50:39 +0000 (15:50 -0800)]
fm10k: constify fm10k_mac_ops, fm10k_iov_ops and fm10k_info structures
These structures never change so declare them as const.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f329ad732b21dc86d477b47300805dd16178f9ca) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 8 Dec 2015 23:50:34 +0000 (15:50 -0800)]
fm10k: address operator not needed when declaring function pointers
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 4e458cfb226bf9a0e211895370f06838495b2e97) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 16 Nov 2015 23:33:34 +0000 (15:33 -0800)]
fm10k: use ether_addr_equal instead of memcmp
When comparing MAC addresses, use ether_addr_equal instead of memcmp to
ETH_ALEN length. Found and replaced using the following sed:
sed -e 's/memcmp\x28\(.*\), ETH_ALEN\x29/!ether_addr_equal\x28\1\x29/'
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 6186ddf06dd270a09ca08cc3c182d4cd58cf0218) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 10 Nov 2015 17:40:30 +0000 (09:40 -0800)]
fm10k: Cleanup exception handling for changing queues
This patch is meant to cleanup the exception handling for the paths where
we reset the interrupts and then reconfigure them. In all of these paths
we had very different levels of exception handling. I have updated the
driver so that all of the paths should result in a similar state if we
fail.
Specifically the driver will now unload the mailbox interrupt, free the
queue vectors and MSI-X, and then detach the interface.
In addition for any of the PCIe related resets I have added a check with
the hw_ready function to just make sure the registers are in a readable
state prior to reopening the interface.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 09f8a82b6abbff279f41ac2892707d3f0f32d00c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 9 Nov 2015 22:04:08 +0000 (14:04 -0800)]
fm10k: correctly pack TLV structures and explain reasoning
The TLV format for little endian structures is actually 4 byte aligned
copy. To this end, we need to add an additional __aligned(4) marker
along with __packed to ensure that these structures are actually 4 byte
aligned and packed correctly. Use of just __packed will not work as this
will result in 1byte alignment which is incorrect. Add a comment
explaining the reasoning behind why these structures need the special
treatment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 8c2a029c7eff14510fed04cef2848c6d21ed92dd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Tue, 3 Nov 2015 19:35:02 +0000 (11:35 -0800)]
fm10k: don't initialize fm10k_workqueue at global level
Cleans up checkpatch GLOBAL_INITIALIZERS error
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 07146e2ea8d878d3bfb8d7d3424350d447e0166f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Thu, 29 Oct 2015 20:43:40 +0000 (13:43 -0700)]
fm10k: initialize xps at driver load
Similar to ixgbe and i40e, initialize XPS on driver load so that we can
take advantage of this kernel feature.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 504b0fdf92bfb28b88b79fe3bf356b840b2e555c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:56 +0000 (17:19 -0700)]
fm10k: cleanup overly long lines
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3d02b3df733af0531789fff3fc999f9ca843b66e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:51 +0000 (17:19 -0700)]
fm10k: cleanup namespace pollution
Make functions that should be static. While we're at it, fix the function
header comment for fm10k_tlv_attr_nest_stop(), and update the copyright
header for fm10k_pf.h, fm10k_tlv.c and fm10k_tlv.h.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit bb269e8bb5ab5015574cf44af6233278af629bcb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:45 +0000 (17:19 -0700)]
fm10k: use BIT() macro instead of open-coded bit-shifting
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 3e515645b198ac60f493822f9193dd8107e1b8d0) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Thu, 29 Oct 2015 00:19:40 +0000 (17:19 -0700)]
fm10k: whitespace cleanups
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit a4fcad656e1100bdda9b0b752b93a1a276810469) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Bruce Allan [Wed, 28 Oct 2015 23:04:40 +0000 (16:04 -0700)]
fm10k: do not inline fm10k_iov_select_vid()
The function declaration does not need to be 'inline'd here.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e214d85b4a0c358c5aefa45d72bb00138fbcb6ac) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 27 Oct 2015 23:59:18 +0000 (16:59 -0700)]
fm10k: Cleanup exception handling for mailbox interrupt
This patch addresses two issues.
First is the fact that the fm10k_mbx_free_irq was assuming msix_entries was
valid and that will not always be the case. As such we need to add a check
for if it is NULL.
Second is the fact that we weren't freeing the IRQ if the mailbox API
returned an error on trying to connect.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit e00e23bceba48a8f0c94fefe26948404cbd43d0a) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Alexander Duyck [Tue, 27 Oct 2015 23:59:12 +0000 (16:59 -0700)]
fm10k: Cleanup MSI-X interrupts in case of failure
If the q_vector allocation fails we should free the resources associated
with the MSI-X vector table.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 587731e684dcf3522215194a02357d26b9bc7277) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Tue, 27 Oct 2015 19:51:09 +0000 (12:51 -0700)]
fm10k: conditionally compile DCB and DebugFS support
Rather than wrapping fm10k_dcbnl.c and fm10k_debugfs.c support with
#ifdef blocks, just conditionally include the .o files in the Makefile.
Also, since we're modifying it, update the copyright year on the
Makefile.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 5682366cecd1d40cb63f6a88dbe53349cb97e173) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 2 Nov 2015 20:10:22 +0000 (12:10 -0800)]
fm10k: consistently refer to VLANs and VLAN IDs
Instead of using lowercase vlan, vid, or VID, always use VLAN or VLAN ID
in comments when referring to VLANs. The original driver code was
consistent, but recent patches have not been as consistent with this
naming scheme.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit aa502b4a2425a269787fbe2c3a91054d5e648a64) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:06 +0000 (16:32 -0700)]
fm10k: remove namespace pollution of fm10k_iov_msg_data_pf
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit b80b1a51a19d613751d032fe213d7802d945f300) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:04 +0000 (16:32 -0700)]
fm10k: do not use CamelCase
Avoid the use of CamelCase for some variable names that previously
slipped through review.
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 40423dd2a56ab95c41b69d9dd910199a0acfd5c5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Mon, 26 Oct 2015 23:32:02 +0000 (16:32 -0700)]
fm10k: use ether_addr_copy to copy MAC address
Use the ether_addr_copy function instead of copying byte-by-byte in a
for-loop by hand.
Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit f0cf5c98981353563b929801100c30071f0eeefb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:09 +0000 (10:57 -0700)]
fm10k: change default Tx ITR to 25usec
The current default ITR for Tx is overly restrictive. Using a simple
netperf TCP_STREAM test, we top out at about 10Gb/s for a single thread
when running using 1500 byte frames. By reducing the ITR value to 25usec
(up to 40K interrupts a second from 10K), we are able to achieve 36Gb/s
for a single thread TCP stream test.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit dbf4284886c59a17dc0081cee39039ac2a546078) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:08 +0000 (10:57 -0700)]
fm10k: use macro for default Tx and Rx ITR values
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 436ea956bffd9974bc41ae9bd99930e29d9c807d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Jacob Keller [Fri, 16 Oct 2015 17:57:05 +0000 (10:57 -0700)]
fm10k: Add support for ITR scaling based on PCIe link speed
The Intel Ethernet Switch FM10000 Host Interface interrupt throttle
timers are based on the PCIe link speed. Because of this, the value
being programmed into the ITR registers must be scaled accordingly.
For the PF, this is as simple as reading the PCIe link speed and storing
the result. However, in the case of SR-IOV, the VF's interrupt throttle
timers are based on the link speed of the PF. However, the VF is unable
to get the link speed information from its configuration space, so the
PF must inform it of what scale to use.
Rather than pass this scale via mailbox message, take advantage of
unused bits in the TDLEN register to pass the scale. It is the
responsibility of the PF to program this for the VF while setting up the
VF queues and the responsibility of the VF to get the information
accordingly. This is preferable because it allows the VF to set up the
interrupts properly during initialization and matches how the MAC
address is passed in the TDBAL/TDBAH registers.
Since we're modifying fm10k_type.h, we may as well also update the
copyright year.
Reported-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 25394529
(cherry picked from commit 20076fa18571e2e274f51a2012ff5ef5c82e93a5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
projects / users / jedix / linux-maple.git / log