Song Yoong Siang [Wed, 5 Feb 2025 02:36:03 +0000 (10:36 +0800)]
igc: Set buffer type for empty frames in igc_init_empty_frame
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the
igc_init_empty_frame function. This ensures that the buffer type is
correctly identified and handled during Tx ring cleanup.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Zdenek Bouska [Tue, 28 Jan 2025 12:26:48 +0000 (13:26 +0100)]
igc: Fix HW RX timestamp when passed by ZC XDP
Fixes HW RX timestamp in the following scenario:
- AF_PACKET socket with enabled HW RX timestamps is created
- AF_XDP socket with enabled zero copy is created
- frame is forwarded to the BPF program, where the timestamp should
still be readable (extracted by igc_xdp_rx_timestamp(), kfunc
behind bpf_xdp_metadata_rx_timestamp())
- the frame got XDP_PASS from BPF program, redirecting to the stack
- AF_PACKET socket receives the frame with HW RX timestamp
Moves the skb timestamp setting from igc_dispatch_skb_zc() to
igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to
igc_construct_skb().
This issue can also be reproduced by running:
# tools/testing/selftests/bpf/xdp_hw_metadata enp1s0
When a frame with the wrong port 9092 (instead of 9091) is used:
# echo -n xdp | nc -u -q1 192.168.10.9 9092
then the RX timestamp is missing and xdp_hw_metadata prints:
skb hwtstamp is not found!
With this fix or when copy mode is used:
# tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0
then RX timestamp is found and xdp_hw_metadata prints:
found skb hwtstamp = 1736509937.852786132
Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Piotr Kwapulinski [Fri, 31 Jan 2025 12:14:50 +0000 (13:14 +0100)]
ixgbe: Fix possible skb NULL pointer dereference
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in
ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status
encoding. Propagate this logic to the ixgbe_put_rx_buffer().
The commit also relaxed the skb NULL pointer check - caught by Smatch.
Restore this check.
Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/ Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Joshua Hay [Wed, 5 Feb 2025 02:08:11 +0000 (18:08 -0800)]
idpf: call set_real_num_queues in idpf_open
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sridhar Samudrala [Sat, 11 Jan 2025 00:29:22 +0000 (16:29 -0800)]
idpf: fix handling rsc packet with a single segment
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paolo Abeni [Tue, 11 Feb 2025 09:39:46 +0000 (10:39 +0100)]
Merge tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix panic during interface removal in BATMAN V, by Andy Strohman
- Cleanup BATMAN V/ELP metric handling, by Sven Eckelmann (2 patches)
- Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1(),
by Remi Pommarel
* tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()
batman-adv: Drop unmanaged ELP metric worker
batman-adv: Ignore neighbor throughput metrics in error case
batman-adv: fix panic during interface removal
====================
Thomas Weißschuh [Fri, 7 Feb 2025 09:39:06 +0000 (10:39 +0100)]
ptp: vmclock: Remove goto-based cleanup logic
vmclock_probe() uses an "out:" label to return from the function on
error. This indicates that some cleanup operation is necessary.
However the label does not do anything as all resources are managed
through devres, making the code slightly harder to read.
Remove the label and just return directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Weißschuh [Fri, 7 Feb 2025 09:39:05 +0000 (10:39 +0100)]
ptp: vmclock: Clean up miscdev and ptp clock through devres
Most resources owned by the vmclock device are managed through devres.
Only the miscdev and ptp clock are managed manually.
This makes the code slightly harder to understand than necessary.
Switch them over to devres and remove the now unnecessary drvdata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Weißschuh [Fri, 7 Feb 2025 09:39:04 +0000 (10:39 +0100)]
ptp: vmclock: Don't unregister misc device if it was not registered
vmclock_remove() tries to detect the successful registration of the misc
device based on the value of its minor value.
However that check is incorrect if the misc device registration was not
attempted in the first place.
Always initialize the minor number, so the check works properly.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thomas Weißschuh [Fri, 7 Feb 2025 09:39:03 +0000 (10:39 +0100)]
ptp: vmclock: Set driver data before its usage
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Woodhouse [Fri, 7 Feb 2025 09:39:02 +0000 (10:39 +0100)]
ptp: vmclock: Add .owner to vmclock_miscdev_fops
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device") Cc: stable@vger.kernel.org Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 11 Feb 2025 03:24:05 +0000 (19:24 -0800)]
Merge tag 'linux-can-fixes-for-6.14-20250208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-02-08
The first patch is by Reyders Morales and fixes a code example in the
CAN ISO15765-2 documentation.
The next patch is contributed by Alexander Hölzl and fixes sending of
J1939 messages with zero data length.
Fedor Pchelkin's patch for the ctucanfd driver adds a missing handling
for an skb allocation error.
Krzysztof Kozlowski contributes a patch for the c_can driver to fix
unbalanced runtime PM disable in error path.
The next patch is by Vincent Mailhol and fixes a NULL pointer
dereference on udev->serial in the etas_es58x driver.
The patch is by Robin van der Gracht and fixes the handling for an skb
allocation error.
* tag 'linux-can-fixes-for-6.14-20250208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
can: c_can: fix unbalanced runtime PM disable in error path
can: ctucanfd: handle skb allocation failure
can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero
Documentation/networking: fix basic node example document ISO 15765-2
====================
Jakub Kicinski [Tue, 11 Feb 2025 02:13:06 +0000 (18:13 -0800)]
Merge tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Eric Dumazet [Fri, 7 Feb 2025 13:58:39 +0000 (13:58 +0000)]
ndisc: extend RCU protection in ndisc_send_skb()
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF.
Fixes: 1762f7e88eb3 ("[NETNS][IPV6] ndisc - make socket control per namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 7 Feb 2025 13:58:36 +0000 (13:58 +0000)]
arp: use RCU protection in arp_xmit()
arp_xmit() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes: 29a26a568038 ("netfilter: Pass struct net into the netfilter hooks") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 7 Feb 2025 13:58:33 +0000 (13:58 +0000)]
ndisc: ndisc_send_redirect() must use dev_get_by_index_rcu()
ndisc_send_redirect() is called under RCU protection, not RTNL.
It must use dev_get_by_index_rcu() instead of __dev_get_by_index()
Fixes: 2f17becfbea5 ("vrf: check the original netdevice for generating redirect") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250207135841.1948589-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Furong Xu [Fri, 7 Feb 2025 08:56:39 +0000 (16:56 +0800)]
net: stmmac: Apply new page pool parameters when SPH is enabled
Commit df542f669307 ("net: stmmac: Switch to zero-copy in
non-XDP RX path") makes DMA write received frame into buffer at offset
of NET_SKB_PAD and sets page pool parameters to sync from offset of
NET_SKB_PAD. But when Header Payload Split is enabled, the header is
written at offset of NET_SKB_PAD, while the payload is written at
offset of zero. Uncorrect offset parameter for the payload breaks dma
coherence [1] since both CPU and DMA touch the page buffer from offset
of zero which is not handled by the page pool sync parameter.
And in case the DMA cannot split the received frame, for example,
a large L2 frame, pp_params.max_len should grow to match the tail
of entire frame.
Vincent Mailhol [Tue, 4 Feb 2025 15:48:15 +0000 (00:48 +0900)]
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it.
Reported-by: yan kang <kangyan91@outlook.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/linux-can/SY8P300MB0421E0013C0EBD2AA46BA709A1F42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/ Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250204154859.9797-2-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Krzysztof Kozlowski [Sun, 12 Jan 2025 12:41:52 +0000 (13:41 +0100)]
can: c_can: fix unbalanced runtime PM disable in error path
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fedor Pchelkin [Tue, 14 Jan 2025 15:21:38 +0000 (18:21 +0300)]
can: ctucanfd: handle skb allocation failure
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Alexander Hölzl [Wed, 5 Feb 2025 17:46:51 +0000 (18:46 +0100)]
can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero
The J1939 standard requires the transmission of messages of length 0.
For example proprietary messages are specified with a data length of 0
to 1785. The transmission of such messages is not possible. Sending
results in no error being returned but no corresponding can frame
being generated.
Enable the transmission of zero length J1939 messages. In order to
facilitate this two changes are necessary:
1) If the transmission of a new message is requested from user space
the message is segmented in j1939_sk_send_loop(). Let the segmentation
take into account zero length messages, do not terminate immediately,
queue the corresponding skb.
2) j1939_session_skb_get_by_offset() selects the next skb to transmit
for a session. Take into account that there might be zero length skbs
in the queue.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org
[mkl: commit message rephrased] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Paolo Abeni [Thu, 6 Feb 2025 21:28:48 +0000 (22:28 +0100)]
Revert "net: skb: introduce and use a single page frag cache"
This reverts commit dbae2b062824 ("net: skb: introduce and use a single
page frag cache"). The intended goal of such change was to counter a
performance regression introduced by commit 3226b158e67c ("net: avoid
32 x truesize under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to the
introduction of the SKB_HEAD_ALIGN() helper and local lock infra in the
affected code.
Murad Masimov [Mon, 3 Feb 2025 09:12:03 +0000 (12:12 +0300)]
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device.
Fixes: 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()") Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250203091203.1744-1-m.masimov@mt-integration.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kory Maincent [Wed, 5 Feb 2025 11:03:01 +0000 (12:03 +0100)]
net: ethtool: tsconfig: Fix netlink type of hwtstamp flags
Fix the netlink type for hardware timestamp flags, which are represented
as a bitset of flags. Although only one flag is supported currently, the
correct netlink bitset type should be used instead of u32 to keep
consistency with other fields. Address this by adding a new named string
set description for the hwtstamp flag structure.
The code has been introduced in the current release so the uAPI change is
still okay.
Eric Dumazet [Wed, 5 Feb 2025 15:51:20 +0000 (15:51 +0000)]
ipv6: Use RCU in ip6_input()
Instead of grabbing rcu_read_lock() from ip6_input_finish(),
do it earlier in is caller, so that ip6_input() access
to dev_net() can be validated by LOCKDEP.
Kalle Valo [Mon, 3 Feb 2025 18:04:45 +0000 (20:04 +0200)]
MAINTAINERS: wifi: remove Kalle
I'm stepping down as wireless driver maintainer. Johannes kindly voluntereed to
be the "custodian"[1] for the drivers until a better solution is found.
Kalle Valo [Mon, 3 Feb 2025 18:04:44 +0000 (20:04 +0200)]
MAINTAINERS: wifi: ath: remove Kalle
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Linus Torvalds [Thu, 6 Feb 2025 17:14:54 +0000 (09:14 -0800)]
Merge tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
Russell King (Oracle) [Wed, 5 Feb 2025 12:57:47 +0000 (12:57 +0000)]
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Jakub Kicinski [Tue, 4 Feb 2025 21:57:50 +0000 (13:57 -0800)]
MAINTAINERS: add a sample ethtool section entry
I feel like we don't do a good enough keeping authors of driver
APIs around. The ethtool code base was very nicely compartmentalized
by Michal. Establish a precedent of creating MAINTAINERS entries
for "sections" of the ethtool API. Use Andrew and cable test as
a sample entry. The entry should ideally cover 3 elements:
a core file, test(s), and keywords. The last one is important
because we intend the entries to cover core code *and* reviews
of drivers implementing given API!
Jakub Kicinski [Tue, 4 Feb 2025 21:57:29 +0000 (13:57 -0800)]
MAINTAINERS: add entry for ethtool
Michal did an amazing job converting ethtool to Netlink, but never
added an entry to MAINTAINERS for himself. Create a formal entry
so that we can delegate (portions) of this code to folks.
Over the last 3 years majority of the reviews have been done by
Andrew and I. I suppose Michal didn't want to be on the receiving
end of the flood of patches.
Jakub Kicinski [Thu, 6 Feb 2025 02:47:50 +0000 (18:47 -0800)]
Merge branch 'rxrpc-call-state-fixes'
David Howells says:
====================
rxrpc: Call state fixes
Here some call state fixes for AF_RXRPC.
(1) Fix the state of a call to not treat the challenge-response cycle as
part of an incoming call's state set. The problem is that it makes
handling received of the final packet in the receive phase difficult
as that wants to change the call state - but security negotiations may
not yet be complete.
(2) Fix a race between the changing of the call state at the end of the
request reception phase of a service call, recvmsg() collecting the last
data and sendmsg() trying to send the reply before the I/O thread has
advanced the call state.
David Howells [Tue, 4 Feb 2025 23:05:54 +0000 (23:05 +0000)]
rxrpc: Fix race in call state changing vs recvmsg()
There's a race in between the rxrpc I/O thread recording the end of the
receive phase of a call and recvmsg() examining the state of the call to
determine whether it has completed.
The problem is that call->_state records the I/O thread's view of the call,
not the application's view (which may lag), so that alone is not
sufficient. To this end, the application also checks whether there is
anything left in call->recvmsg_queue for it to pick up. The call must be
in state RXRPC_CALL_COMPLETE and the recvmsg_queue empty for the call to be
considered fully complete.
In rxrpc_input_queue_data(), the latest skbuff is added to the queue and
then, if it was marked as LAST_PACKET, the state is advanced... But this
is two separate operations with no locking around them.
As a consequence, the lack of locking means that sendmsg() can jump into
the gap on a service call and attempt to send the reply - but then get
rejected because the I/O thread hasn't advanced the state yet.
Simply flipping the order in which things are done isn't an option as that
impacts the client side, causing the checks in rxrpc_kernel_check_life() as
to whether the call is still alive to race instead.
Fix this by moving the update of call->_state inside the skb queue
spinlocked section where the packet is queued on the I/O thread side.
rxrpc's recvmsg() will then automatically sync against this because it has
to take the call->recvmsg_queue spinlock in order to dequeue the last
packet.
rxrpc's sendmsg() doesn't need amending as the app shouldn't be calling it
to send a reply until recvmsg() indicates it has returned all of the
request.
Fixes: 93368b6bd58a ("rxrpc: Move call state changes from recvmsg to I/O thread") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250204230558.712536-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Tue, 4 Feb 2025 23:05:53 +0000 (23:05 +0000)]
rxrpc: Fix call state set to not include the SERVER_SECURING state
The RXRPC_CALL_SERVER_SECURING state doesn't really belong with the other
states in the call's state set as the other states govern the call's Rx/Tx
phase transition and govern when packets can and can't be received or
transmitted. The "Securing" state doesn't actually govern the reception of
packets and would need to be split depending on whether or not we've
received the last packet yet (to mirror RECV_REQUEST/ACK_REQUEST).
The "Securing" state is more about whether or not we can start forwarding
packets to the application as recvmsg will need to decode them and the
decoding can't take place until the challenge/response exchange has
completed.
Fix this by removing the RXRPC_CALL_SERVER_SECURING state from the state
set and, instead, using a flag, RXRPC_CALL_CONN_CHALLENGING, to track
whether or not we can queue the call for reception by recvmsg() or notify
the kernel app that data is ready. In the event that we've already
received all the packets, the connection event handler will poke the app
layer in the appropriate manner.
Also there's a race whereby the app layer sees the last packet before rxrpc
has managed to end the rx phase and change the state to one amenable to
allowing a reply. Fix this by queuing the packet after calling
rxrpc_end_rx_phase().
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250204230558.712536-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 4 Feb 2025 12:38:39 +0000 (14:38 +0200)]
net: sched: Fix truncation of offloaded action statistics
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Cong Wang [Tue, 4 Feb 2025 00:58:41 +0000 (16:58 -0800)]
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
Integrate the test case provided by Mingi Cho into TDC.
All test results:
1..4
ok 1 ca5e - Check class delete notification for ffff:
ok 2 e4b7 - Check class delete notification for root ffff:
ok 3 33a9 - Check ingress is not searchable on backlog update
ok 4 a4b9 - Test class qlen notification
Cong Wang [Tue, 4 Feb 2025 00:58:40 +0000 (16:58 -0800)]
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list.
Fixes: f8d4bc455047 ("net/sched: netem: account for backlog updates from child qdisc") Cc: Martin Ottens <martin.ottens@fau.de> Reported-by: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quang Le [Tue, 4 Feb 2025 00:58:39 +0000 (16:58 -0800)]
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
When limit == 0, pfifo_tail_enqueue() must drop new packet and
increase dropped packets count of the qdisc.
All test results:
1..16
ok 1 a519 - Add bfifo qdisc with system default parameters on egress
ok 2 585c - Add pfifo qdisc with system default parameters on egress
ok 3 a86e - Add bfifo qdisc with system default parameters on egress with handle of maximum value
ok 4 9ac8 - Add bfifo qdisc on egress with queue size of 3000 bytes
ok 5 f4e6 - Add pfifo qdisc on egress with queue size of 3000 packets
ok 6 b1b1 - Add bfifo qdisc with system default parameters on egress with invalid handle exceeding maximum value
ok 7 8d5e - Add bfifo qdisc on egress with unsupported argument
ok 8 7787 - Add pfifo qdisc on egress with unsupported argument
ok 9 c4b6 - Replace bfifo qdisc on egress with new queue size
ok 10 3df6 - Replace pfifo qdisc on egress with new queue size
ok 11 7a67 - Add bfifo qdisc on egress with queue size in invalid format
ok 12 1298 - Add duplicate bfifo qdisc on egress
ok 13 45a0 - Delete nonexistent bfifo qdisc
ok 14 972b - Add prio qdisc on egress with invalid format for handles
ok 15 4d39 - Delete bfifo qdisc twice
ok 16 d774 - Check pfifo_head_drop qdisc enqueue behaviour when limit == 0
Quang Le [Tue, 4 Feb 2025 00:58:38 +0000 (16:58 -0800)]
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
Expected behaviour:
In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a
packet in scheduler's queue and decrease scheduler's qlen by one.
Then, pfifo_tail_enqueue() enqueue new packet and increase
scheduler's qlen by one. Finally, pfifo_tail_enqueue() return
`NET_XMIT_CN` status code.
Weird behaviour:
In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a
scheduler that has no packet, the 'drop a packet' step will do nothing.
This means the scheduler's qlen still has value equal 0.
Then, we continue to enqueue new packet and increase scheduler's qlen by
one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by
one and return `NET_XMIT_CN` status code.
The problem is:
Let's say we have two qdiscs: Qdisc_A and Qdisc_B.
- Qdisc_A's type must have '->graft()' function to create parent/child relationship.
Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`.
- Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`.
- Qdisc_B is configured to have `sch->limit == 0`.
- Qdisc_A is configured to route the enqueued's packet to Qdisc_B.
Enqueue packet through Qdisc_A will lead to:
- hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B)
- Qdisc_B->q.qlen += 1
- pfifo_tail_enqueue() return `NET_XMIT_CN`
- hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A.
The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1.
Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem.
This violate the design where parent's qlen should equal to the sum of its childrens'qlen.
Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable.
Fixes: 57dbb2d83d10 ("sched: add head drop fifo queue") Reported-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://patch.msgid.link/20250204005841.223511-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc166321f
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 5 Feb 2025 16:13:07 +0000 (08:13 -0800)]
Merge tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotation for relocation root to fix a splat warning
while merging roots
- fix assertion failure when splitting ordered extent after transaction
abort
- don't print 'qgroup inconsistent' message when rescan process updates
qgroup data sooner than the subvolume deletion process
- fix use-after-free (accessing the error number) when attempting to
join an aborted transaction
- avoid starting new transaction if not necessary when cleaning qgroup
during subvolume drop
* tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid starting new transaction when cleaning qgroup during subvolume drop
btrfs: fix use-after-free when attempting to join an aborted transaction
btrfs: do not output error message if a qgroup has been already cleaned up
btrfs: fix assertion failure when splitting ordered extent after transaction abort
btrfs: fix lockdep splat while merging a relocation root
Jacob Moroni [Mon, 3 Feb 2025 14:36:05 +0000 (09:36 -0500)]
net: atlantic: fix warning during hot unplug
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Jacob Moroni <mail@jakemoroni.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 4 Feb 2025 19:01:48 +0000 (11:01 -0800)]
Merge tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthreads fix from Frederic Weisbecker:
- Properly handle return value when allocation fails for the preferred
affinity
* tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: Fix return value on kzalloc() failure in kthread_affine_preferred()
Linus Torvalds [Tue, 4 Feb 2025 17:52:01 +0000 (09:52 -0800)]
Merge tag 'livepatching-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching fix from Petr Mladek:
- Fix livepatching selftests for util-linux-2.40.x
* tag 'livepatching-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: handle PRINTK_CALLER in check_result()
Linus Torvalds [Tue, 4 Feb 2025 17:50:02 +0000 (09:50 -0800)]
Merge tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
David Howells [Mon, 3 Feb 2025 11:03:04 +0000 (11:03 +0000)]
rxrpc: Fix the rxrpc_connection attend queue handling
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Fixes: f2cce89a074e ("rxrpc: Implement a mechanism to send an event notification to a connection") Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jithu Joseph [Fri, 31 Jan 2025 20:53:15 +0000 (12:53 -0800)]
platform/x86/intel/ifs: Update documentation with image download path
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Paolo Abeni [Sat, 1 Feb 2025 18:02:51 +0000 (19:02 +0100)]
net: harmonize tstats and dstats
After the blamed commits below, some UDP tunnel use dstats for
accounting. On the xmit path, all the UDP-base tunnels ends up
using iptunnel_xmit_stats() for stats accounting, and the latter
assumes the relevant (tunnel) network device uses tstats.
The end result is some 'funny' stat report for the mentioned UDP
tunnel, e.g. when no packet is actually dropped and a bunch of
packets are transmitted:
Address the issue ensuring the same binary layout for the overlapping
fields of dstats and tstats. While this solution is a bit hackish, is
smaller and with no performance pitfall compared to other alternatives
i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or
reverting the blamed commit.
With time we should possibly move all the IP-based tunnel (and virtual
devices) to dstats.
Fixes: c77200c07491 ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
ethtool: rss: minor fixes for recent RSS changes
Make sure RSS_GET messages are consistent in do and dump.
Fix up a recently added safety check for RSS + queue offset.
Adjust related tests so that they pass on devices which
don't support RSS + queue offset.
====================
Jakub Kicinski [Sat, 1 Feb 2025 01:30:38 +0000 (17:30 -0800)]
ethtool: ntuple: fix rss + ring_cookie check
The info.flow_type is for RXFH commands, ntuple flow_type is inside
the flow spec. The check currently does nothing, as info.flow_type
is 0 (or even uninitialized by user space) for ETHTOOL_SRXCLSRLINS.
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in") Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250201013040.725123-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 1 Feb 2025 01:30:37 +0000 (17:30 -0800)]
ethtool: rss: fix hiding unsupported fields in dumps
Commit ec6e57beaf8b ("ethtool: rss: don't report key if device
doesn't support it") intended to stop reporting key fields for
additional rss contexts if device has a global hashing key.
Later we added dump support and the filtering wasn't properly
added there. So we end up reporting the key fields in dumps
but not in dos:
The drivers/net/hw/rss_ctx.py selftest catches this when run on
a device with single key, already:
# Check| At /root/./ksft-net-drv/drivers/net/hw/rss_ctx.py, line 381, in test_rss_context_dump:
# Check| ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero")
# Check failed {0} == {0} key is all zero
not ok 8 rss_ctx.test_rss_context_dump
Fixes: f6122900f4e2 ("ethtool: rss: support dumping RSS contexts") Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250201013040.725123-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
MAINTAINERS: recognize Kuniyuki Iwashima as a maintainer
Kuniyuki Iwashima has been a prolific contributor and trusted reviewer
for some core portions of the networking stack for a couple of years now.
Formalize some obvious areas of his expertise and list him as a maintainer.
====================
Jakub Kicinski [Sun, 2 Feb 2025 01:47:27 +0000 (17:47 -0800)]
MAINTAINERS: add a general entry for BSD sockets
Create a MAINTAINERS entry for BSD sockets. List the top 3
reviewers as maintainers. The entry is meant to cover core
socket code (of which there isn't much) but also reviews
of any new socket families.
Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250202014728.1005003-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 3 Feb 2025 21:18:44 +0000 (13:18 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix Rx data path for heavy 9k MTU traffic
Maciej Fijalkowski says:
This patchset fixes a pretty nasty issue that was reported by RedHat
folks which occurred after ~30 minutes (this value varied, just trying
here to state that it was not observed immediately but rather after a
considerable longer amount of time) when ice driver was tortured with
jumbo frames via mix of iperf traffic executed simultaneously with
wrk/nginx on client/server sides (HTTP and TCP workloads basically).
The reported splats were spanning across all the bad things that can
happen to the state of page - refcount underflow, use-after-free, etc.
One of these looked as follows:
The fix is mostly about reverting what was done in commit 1dc1a7e7f410
("ice: Centrallize Rx buffer recycling") followed by proper timing on
page_count() storage and then removing the ice_rx_buf::act related logic
(which was mostly introduced for purposes from cited commit).
Special thanks to Xu Du for providing reproducer and Jacob Keller for
initial extensive analysis.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: stop storing XDP verdict within ice_rx_buf
ice: gather page_count()'s of each frag right before XDP prog call
ice: put Rx buffers after being done with current frame
====================
Linus Torvalds [Mon, 3 Feb 2025 17:10:56 +0000 (09:10 -0800)]
Merge tag 'timers-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Properly cast the input to secs_to_jiffies() to unsigned long as
otherwise the result uses the data type of the input variable, which
causes result range checks to fail if the input data type is signed
and smaller than unsigned long.
- Handle late armed hrtimers gracefully on CPU hotplug
There are legitimate cases where a hrtimer is (re)armed on an
outgoing CPU after the timers have been migrated away. This triggers
warnings and caused people to implement horrible workarounds in RCU.
But those workarounds are incomplete and do not cover e.g. the
scheduler hrtimers.
Stop this by force moving timer which are enqueued on the current CPU
after timer migration to be queued on a remote online CPU.
This allows to undo the workarounds in a seperate step.
- Demote a warning level printk() to info level in the clocksource
watchdog code as there is no point to emit a warning level message
for a purely informational message.
- Mark a helper function __always_inline and move it into the existing
#ifdef block to avoid 'unused function' warnings from CLANG
* tag 'timers-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jiffies: Cast to unsigned long in secs_to_jiffies() conversion
clocksource: Use pr_info() for "Checking clocksource synchronization" message
hrtimers: Force migrate away hrtimers queued after CPUHP_AP_HRTIMERS_DYING
hrtimers: Mark is_migration_base() with __always_inline
Linus Torvalds [Mon, 3 Feb 2025 17:04:21 +0000 (09:04 -0800)]
Merge tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating
an IPI. That's a device I/O write which is not guaranteed to be
ordered against preceding memory writes. As a consequence a IPI
receiving CPU might not be able to observe the actual IPI data which
is required to handle it. Switch to writel() which contains the
necessary memory barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and
kept the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI
data, which is now stored in a member of msi_domain_info. This leads
to malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for
the proper conditions, which led to malfunctions of the PMU
interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
* tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
irqchip/riscv: Ensure ordering of memory writes and IPI writes
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
dt-bindings: interrupt-controller: microchip,lan966x-oic: Clarify endpoint use
Linus Torvalds [Mon, 3 Feb 2025 16:51:24 +0000 (08:51 -0800)]
Merge tag 'xfs-fixes-6.14-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs bug fixes from Carlos Maiolino:
"A few fixes for XFS, but the most notable one is:
- xfs: remove xfs_buf_cache.bc_lock
which has been hit by different persons including syzbot"
* tag 'xfs-fixes-6.14-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove xfs_buf_cache.bc_lock
xfs: Add error handling for xfs_reflink_cancel_cow_range
xfs: Propagate errors from xfs_reflink_cancel_cow_range in xfs_dax_write_iomap_end
xfs: don't call remap_verify_area with sb write protection held
xfs: remove an out of data comment in _xfs_buf_alloc
xfs: fix the entry condition of exact EOF block allocation optimization
Yan Zhai [Fri, 31 Jan 2025 08:31:39 +0000 (00:31 -0800)]
udp: gso: do not drop small packets when PMTU reduces
Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan@cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lenny Szubowicz [Thu, 30 Jan 2025 21:57:54 +0000 (16:57 -0500)]
tg3: Disable tg3 PCIe AER on system reboot
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kandybka [Thu, 23 Jan 2025 22:07:39 +0000 (01:07 +0300)]
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
In pmc_core_ltr_show(), promote 'val' to 'u64' to avoid possible integer
overflow. Values (10 bit) are multiplied by the scale, the result of
expression is in a range from 1 to 34,326,183,936 which is bigger then
UINT32_MAX. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250123220739.68087-1-d.kandybka@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fedor Pchelkin [Mon, 27 Jan 2025 21:02:01 +0000 (00:02 +0300)]
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
devm_platform_profile_register() expects a pointer to the private driver
data but instead an address of the pointer variable is passed due to a
typo. This leads to the crashes later:
Found by Linux Verification Center (linuxtesting.org).
Fixes: 249c576f0f9d ("ACPI: platform_profile: Let drivers set drvdata to the class device") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250127210202.568691-1-pchelkin@ispras.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Linus Torvalds [Sun, 2 Feb 2025 18:49:13 +0000 (10:49 -0800)]
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Linus Torvalds [Sun, 2 Feb 2025 18:40:27 +0000 (10:40 -0800)]
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Len Brown [Sun, 2 Feb 2025 16:43:02 +0000 (10:43 -0600)]
tools/power turbostat: version 2025.02.02
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
projects / users / willy / pagecache.git / log