In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 11 Aug 2024 03:49:53 +0000 (04:49 +0100)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-q
ueue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-07 (igc)
This series contains updates to igc driver only.
Faizal adjusts the size of the MAC internal buffer on i226 devices to
resolve an errata for leaking packet transmits. He also corrects a
condition in which qbv_config_change_errors are incorrectly counted.
Lastly, he adjusts the conditions for resetting the adapter when
changing TSN Tx mode and corrects the conditions in which gtxoffset
register is set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Moon Yeounsu [Wed, 7 Aug 2024 10:07:21 +0000 (19:07 +0900)]
net: ethernet: use ip_hdrlen() instead of bit shift
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Thu, 8 Aug 2024 14:41:06 +0000 (17:41 +0300)]
net/mlx5e: Fix queue stats access to non-existing channels splat
The queue stats API queries the queues according to the
real_num_[tr]x_queues, in case the device is down and channels were not
yet created, don't try to query their statistics.
To trigger the panic, run this command before the interface is brought
up:
./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml --dump qstats-get --json '{"ifindex": 4}'
Cosmin Ratiu [Thu, 8 Aug 2024 14:41:05 +0000 (17:41 +0300)]
net/mlx5e: Correctly report errors for ethtool rx flows
Previously, an ethtool rx flow with no attrs would not be added to the
NIC as it has no rules to configure the hw with, but it would be
reported as successful to the caller (return code 0). This is confusing
for the user as ethtool then reports "Added rule $num", but no rule was
actually added.
This change corrects that by instead reporting these wrong rules as
-EINVAL.
Dragos Tatulea [Thu, 8 Aug 2024 14:41:04 +0000 (17:41 +0300)]
net/mlx5e: Take state lock during tx timeout reporter
mlx5e_safe_reopen_channels() requires the state lock taken. The
referenced changed in the Fixes tag removed the lock to fix another
issue. This patch adds it back but at a later point (when calling
mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the
Fixes tag.
Dragos Tatulea [Thu, 8 Aug 2024 14:41:03 +0000 (17:41 +0300)]
net/mlx5e: SHAMPO, Increase timeout to improve latency
During latency tests (netperf TCP_RR) a 30% degradation of HW GRO vs SW
GRO was observed. This is due to SHAMPO triggering timeout filler CQEs
instead of delivering the CQE for the packet.
Having a short timeout for SHAMPO doesn't bring any benefits as it is
the driver that does the merging, not the hardware. On the contrary, it
can have a negative impact: additional filler CQEs are generated due to
the timeout. As there is no way to disable this timeout, this change
sets it to the maximum value.
Instead of using the packet_merge.timeout parameter which is also used
for LRO, set the value directly when filling in the rest of the SHAMPO
parameters in mlx5e_build_rq_param().
Tariq Toukan [Thu, 8 Aug 2024 14:41:02 +0000 (17:41 +0300)]
net/mlx5: SD, Do not query MPIR register if no sd_group
Unconditionally calling the MPIR query on BF separate mode yields the FW
syndrome below [1]. Do not call it unless admin clearly specified the SD
group, i.e. expressing the intention of using the multi-PF netdev
feature.
This fix covers cases not covered in
commit fca3b4791850 ("net/mlx5: Do not query MPIR on embedded CPU function").
[1]
mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed,
status bad system state(0x4), syndrome (0x685f19), err(-5)
Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20240808144107.2095424-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Don't take HW USO path when packets can't be checksummed by device
This series addresses a recent regression report from syzbot [1].
After enabling UDP_SEGMENT for egress devices which don't support checksum
offload [2], we need to tighten down the checks which let packets take the
HW USO path.
The fix consists of two parts:
1. don't let devices offer USO without checksum offload, and
2. force software USO fallback in presence of IPv6 extension headers.
Jakub Sitnicki [Thu, 8 Aug 2024 09:56:23 +0000 (11:56 +0200)]
selftests/net: Add coverage for UDP GSO with IPv6 extension headers
After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.
Extend the UDP GSO IPv6 tests to cover this scenario.
Jakub Sitnicki [Thu, 8 Aug 2024 09:56:22 +0000 (11:56 +0200)]
udp: Fall back to software USO if IPv6 extension headers are present
In commit 10154dbded6d ("udp: Allow GSO transmit from devices with no
checksum offload") we have intentionally allowed UDP GSO packets marked
CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and
checksummed by a software fallback when the egress device lacks these
features.
What was not taken into consideration is that a CHECKSUM_NONE skb can be
handed over to the GSO stack also when the egress device advertises the
tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature.
This will happen when there are IPv6 extension headers present, which we
check for in __ip6_append_data(). Syzbot has discovered this scenario,
producing a warning as below:
We are hitting the bad offload warning because when an egress device is
capable of handling segmentation offload requested by
skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce
any segment skbs and return NULL. See the skb_gso_ok() branch in
{__udp,tcp,sctp}_gso_segment helpers.
To fix it, force a fallback to software USO when processing a packet with
IPv6 extension headers, since we don't know if these can checksummed by
all devices which offer USO.
Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload") Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/ Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-2-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Sitnicki [Thu, 8 Aug 2024 09:56:21 +0000 (11:56 +0200)]
net: Make USO depend on CSUM offload
UDP segmentation offload inherently depends on checksum offload. It should
not be possible to disable checksum offload while leaving USO enabled.
Enforce this dependency in code.
There is a single tx-udp-segmentation feature flag to indicate support for
both IPv4/6, hence the devices wishing to support USO must offer checksum
offload for both IP versions.
Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Foster Snowhill [Tue, 6 Aug 2024 17:28:09 +0000 (19:28 +0200)]
usbnet: ipheth: fix carrier detection in modes 1 and 4
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.
Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:
* 1 byte (seen on iOS 4.2.1, 8.4):
* 03: carrier off (mode 0)
* 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
* 03 03 03: carrier off (mode 0)
* 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
* 03 03 03 00: carrier off (mode 0)
* 04 03 03 00: carrier off (mode 1)
* 06 03 03 00: carrier off (mode 4)
* 04 04 03 04: carrier on (mode 0 and 1)
* 06 04 03 04: carrier on (mode 4)
Before this change, the driver always used the first byte of the
response to determine carrier state.
From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.
Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.
Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.
Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Foster Snowhill [Tue, 6 Aug 2024 17:28:07 +0000 (19:28 +0200)]
usbnet: ipheth: drop RX URBs with no payload
On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.
This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.
Drop RX URBs with no payload.
Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net>
Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.
The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.
Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.
Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Tue, 6 Aug 2024 17:28:05 +0000 (19:28 +0200)]
usbnet: ipheth: race between ipheth_close and error handling
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.
Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 8 Aug 2024 20:51:44 +0000 (13:51 -0700)]
Merge tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
Linus Torvalds [Thu, 8 Aug 2024 20:32:59 +0000 (13:32 -0700)]
Merge tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have reading of event format files test if the metadata still exists.
When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata
is set to state that it is to prevent any new references to it from
happening while waiting for existing references to close. When the
last reference closes, the metadata is freed. But the "format" was
missing a check to this flag (along with some other files) that
allowed new references to happen, and a use-after-free bug to occur.
- Have the trace event meta data use the refcount infrastructure
instead of relying on its own atomic counters.
- Have tracefs inodes use alloc_inode_sb() for allocation instead of
using kmem_cache_alloc() directly.
- Have eventfs_create_dir() return an ERR_PTR instead of NULL as the
callers expect a real object or an ERR_PTR.
- Have release_ei() use call_srcu() and not call_rcu() as all the
protection is on SRCU and not RCU.
- Fix ftrace_graph_ret_addr() to use the task passed in and not
current.
- Fix overflow bug in get_free_elt() where the counter can overflow the
integer and cause an infinite loop.
- Remove unused function ring_buffer_nr_pages()
- Have tracefs freeing use the inode RCU infrastructure instead of
creating its own.
When the kernel had randomize structure fields enabled, the rcu field
of the tracefs_inode was overlapping the rcu field of the inode
structure, and corrupting it. Instead, use the destroy_inode()
callback to do the initial cleanup of the code, and then have
free_inode() free it.
* tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracefs: Use generic inode RCU for synchronizing freeing
ring-buffer: Remove unused function ring_buffer_nr_pages()
tracing: Fix overflow in get_free_elt()
function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()
eventfs: Use SRCU for freeing eventfs_inodes
eventfs: Don't return NULL in eventfs_create_dir()
tracefs: Fix inode allocation
tracing: Use refcount for trace_event_file reference counter
tracing: Have format file honor EVENT_FILE_FL_FREED
Linus Torvalds [Thu, 8 Aug 2024 20:27:31 +0000 (13:27 -0700)]
Merge tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted little stuff:
- lockdep fixup for lockdep_set_notrack_class()
- we can now remove a device when using erasure coding without
deadlocking, though we still hit other issues
- the 'allocator stuck' timeout is now configurable, and messages are
ratelimited. The default timeout has been increased from 10 seconds
to 30"
* tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs:
bcachefs: Use bch2_wait_on_allocator() in btree node alloc path
bcachefs: Make allocator stuck timeout configurable, ratelimit messages
bcachefs: Add missing path_traverse() to btree_iter_next_node()
bcachefs: ec should not allocate from ro devs
bcachefs: Improved allocator debugging for ec
bcachefs: Add missing bch2_trans_begin() call
bcachefs: Add a comment for bucket helper types
bcachefs: Don't rely on implicit unsigned -> signed integer conversion
lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT
bcachefs: Fix double free of ca->buckets_nouse
Linus Torvalds [Thu, 8 Aug 2024 19:29:40 +0000 (12:29 -0700)]
module: warn about excessively long module waits
Russell King reported that the arm cbc(aes) crypto module hangs when
loaded, and Herbert Xu bisected it to commit 9b9879fc0327 ("modules:
catch concurrent module loads, treat them as idempotent"), and noted:
"So what's happening here is that the first modprobe tries to load a
fallback CBC implementation, in doing so it triggers a load of the
exact same module due to module aliases.
IOW we're loading aes-arm-bs which provides cbc(aes). However, this
needs a fallback of cbc(aes) to operate, which is made out of the
generic cbc module + any implementation of aes, or ecb(aes). The
latter happens to also be provided by aes-arm-cb so that's why it
tries to load the same module again"
So loading the aes-arm-bs module ends up wanting to recursively load
itself, and the recursive load then ends up waiting for the original
module load to complete.
This is a regression, in that it used to be that we just tried to load
the module multiple times, and then as we went on to install it the
second time we would instead just error out because the module name
already existed.
That is actually also exactly what the original "catch concurrent loads"
patch did in commit 9828ed3f695a ("module: error out early on concurrent
load of the same module file"), but it turns out that it ends up being
racy, in that erroring out before the module has been fully initialized
will cause failures in dependent module loading.
See commit ac2263b588df (which was the revert of that "error out early")
commit for details about why erroring out before the module has been
initialized is actually fundamentally racy.
Now, for the actual recursive module load (as opposed to just
concurrently loading the same module twice), the race is not an issue.
At the same time it's hard for the kernel to see that this is recursion,
because the module load is always done from a usermode helper, so the
recursion is not some simple callchain within the kernel.
End result: this is not the real fix, but this at least adds a warning
for the situation (admittedly much too late for all the debugging pain
that Russell and Herbert went through) and if we can come to a
resolution on how to detect the recursion properly, this re-organizes
the code to make that easier.
Linus Torvalds [Thu, 8 Aug 2024 18:22:04 +0000 (11:22 -0700)]
Merge tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Enable general EFI poweroff method to make poweroff usable on
hardwares which lack ACPI S5, use accessors to page table entries
instead of direct dereference to avoid potential problems, and two
trivial kvm cleanups"
* tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove undefined a6 argument comment for kvm_hypercall()
LoongArch: KVM: Remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
LoongArch: Use accessors to page table entries instead of direct dereference
LoongArch: Enable general EFI poweroff method
Martin Whitaker [Wed, 7 Aug 2024 20:52:09 +0000 (21:52 +0100)]
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
As noted in the device errata [1-8], EEE support is not fully operational
in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing
link drops when connected to another device that supports EEE. The patch
series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f77162 caused EEE support to be enabled in these devices. A fix for
this regression for the KSZ9477 alone was merged in commit 08c6d8bae48c2.
This patch extends this fix to the other affected devices.
Gal Pressman [Wed, 7 Aug 2024 17:33:52 +0000 (20:33 +0300)]
ethtool: Fix context creation with no parameters
The 'at least one change' requirement is not applicable for context
creation, skip the check in such case.
This allows a command such as 'ethtool -X eth0 context new' to work.
The command works by mistake when using older versions of userspace
ethtool due to an incompatibility issue where rxfh.input_xfrm is passed
as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent
userspace. This patch does not try to solve the incompatibility issue.
Edward Cree [Wed, 7 Aug 2024 16:06:12 +0000 (17:06 +0100)]
net: ethtool: fix off-by-one error in max RSS context IDs
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Arnd Bergmann [Wed, 7 Aug 2024 07:54:22 +0000 (09:54 +0200)]
net: pse-pd: tps23881: include missing bitfield.h header
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Csókás, Bence [Wed, 7 Aug 2024 08:09:56 +0000 (10:09 +0200)]
net: fec: Stop PPS on driver remove
PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.
Florian Fainelli [Tue, 6 Aug 2024 17:56:59 +0000 (10:56 -0700)]
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
James Chapman [Tue, 6 Aug 2024 16:06:26 +0000 (17:06 +0100)]
l2tp: fix lockdep splat
When l2tp tunnels use a socket provided by userspace, we can hit
lockdep splats like the below when data is transmitted through another
(unrelated) userspace socket which then gets routed over l2tp.
This issue was previously discussed here:
https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/
The solution is to have lockdep treat socket locks of l2tp tunnel
sockets separately than those of standard INET sockets. To do so, use
a different lockdep subclass where lock nesting is possible.
============================================
WARNING: possible recursive locking detected
6.10.0+ #34 Not tainted
--------------------------------------------
iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0
but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10
other info that might help us debug this:
Possible unsafe locking scenario:
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 6 Aug 2024 13:08:41 +0000 (14:08 +0100)]
net: stmmac: dwmac4: fix PCS duplex mode decode
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS
register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1)
rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this.
Fixes: 70523e639bf8c ("drivers: net: stmmac: reworking the PCS code.") Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 8 Aug 2024 14:32:20 +0000 (07:32 -0700)]
Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
Jakub Kicinski [Thu, 8 Aug 2024 03:31:42 +0000 (20:31 -0700)]
Merge tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: avoid dup filtering when passive scanning with adv monitor
- hci_qca: don't call pwrseq_power_off() twice for QCA6390
- hci_qca: fix QCA6390 support on non-DT platforms
- hci_qca: fix a NULL-pointer derefence at shutdown
- l2cap: always unlock channel in l2cap_conless_channel()
* tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
====================
====================
idpf: fix 3 bugs revealed by the Chapter I
Alexander Lobakin says:
The libeth conversion revealed 2 serious issues which lead to sporadic
crashes or WARNs under certain configurations. Additional one was found
while debugging these two with kmemleak.
This one is targeted stable, the rest can be backported manually later
if needed. They can be reproduced only after the conversion is applied
anyway.
====================
Alexander Lobakin [Tue, 6 Aug 2024 22:09:22 +0000 (15:09 -0700)]
idpf: fix UAFs when destroying the queues
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Reported-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Kubiak [Tue, 6 Aug 2024 22:09:21 +0000 (15:09 -0700)]
idpf: fix memleak in vport interrupt configuration
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Cc: stable@vger.kernel.org # 6.7 Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Tue, 6 Aug 2024 22:09:20 +0000 (15:09 -0700)]
idpf: fix memory leaks and crashes while performing a soft reset
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Tue, 6 Aug 2024 05:37:42 +0000 (22:37 -0700)]
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
A recent commit has modified the code in __bnxt_reserve_rings() to
set the default RSS indirection table to default only when the number
of RX rings is changing. While this works for newer firmware that
requires RX ring reservations, it causes the regression on older
firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns
false).
With older firmware, RX ring reservations are not required and so
hw_resc->resv_rx_rings is not always set to the proper value. The
comparison:
if (old_rx_rings != bp->hw_resc.resv_rx_rings)
in __bnxt_reserve_rings() may be false even when the RX rings are
changing. This will cause __bnxt_reserve_rings() to skip setting
the default RSS indirection table to default to match the current
number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to
use an out-of-range index.
We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this
scenario. We just need to move it up in bnxt_need_reserve_rings()
to be called unconditionally when using older firmware. Without the
fix, if the TX rings are changing, we'll skip the
bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also
skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained
in the last paragraph. Without setting the default RSS indirection
table to default, it causes the regression:
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Reported-by: Breno Leitao <leitao@debian.org> Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/ Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Hattori [Tue, 6 Aug 2024 01:13:27 +0000 (10:13 +0900)]
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Mon, 5 Aug 2024 04:38:56 +0000 (12:38 +0800)]
net/smc: add the max value of fallback reason count
The number of fallback reasons defined in the smc_clc.h file has reached
36. For historical reasons, some are no longer quoted, and there's 33
actually in use. So, add the max value of fallback reason count to 36.
Fixes: 6ac1e6563f59 ("net/smc: support smc v2.x features validate") Fixes: 7f0620b9940b ("net/smc: support max connections per lgr negotiation") Fixes: 69b888e3bb4b ("net/smc: support max links per lgr negotiation in clc handshake") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.
Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com Fixes: 004ed42638f4 ("padata: add basic support for multithreaded jobs") Signed-off-by: Waiman Long <longman@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Heidelberg [Sun, 4 Aug 2024 05:45:54 +0000 (14:45 +0900)]
mailmap: update entry for David Heidelberg
Link my old gmail address to my active email.
Link: https://lkml.kernel.org/r/20240804054704.859503-1-david@ixit.cz Signed-off-by: David Heidelberg <david@ixit.cz> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shakeel Butt [Fri, 2 Aug 2024 23:58:22 +0000 (16:58 -0700)]
memcg: protect concurrent access to mem_cgroup_idr
Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.
Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev Fixes: 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Muchun Song <muchun.song@linux.dev> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Wed, 31 Jul 2024 05:46:20 +0000 (13:46 +0800)]
mm: shmem: fix incorrect aligned index when checking conflicts
In the shmem_suitable_orders() function, xa_find() is used to check for
conflicts in the pagecache to select suitable huge orders. However, when
checking each huge order in every loop, the aligned index is calculated
from the previous iteration, which may cause suitable huge orders to be
missed.
We should use the original index each time in the loop to calculate a new
aligned index for checking conflicts to avoid this issue.
Link: https://lkml.kernel.org/r/07433b0f16a152bffb8cee34934a5c040e8e2ad6.1722404078.git.baolin.wang@linux.alibaba.com Fixes: e7a2ab7b3bb5 ("mm: shmem: add mTHP support for anonymous shmem") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Wed, 31 Jul 2024 05:46:19 +0000 (13:46 +0800)]
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
Similar to commit d659b715e94ac ("mm/huge_memory: avoid PMD-size page
cache if needed"), ARM64 can support 512MB PMD-sized THP when the base
page size is 64KB, which is larger than the maximum supported page cache
size MAX_PAGECACHE_ORDER.
This is not expected. To fix this issue, use THP_ORDERS_ALL_FILE_DEFAULT
for shmem to filter allowable huge orders.
Muchun Song [Thu, 18 Jul 2024 08:36:07 +0000 (16:36 +0800)]
mm: list_lru: fix UAF for memory cgroup
The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or
cgroup_mutex or others which could prevent returned memcg from being
freed. Fix it by adding missing rcu read lock.
Found by code inspection.
[songmuchun@bytedance.com: only grab rcu lock when necessary, per Vlastimil] Link: https://lkml.kernel.org/r/20240801024603.1865-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20240718083607.42068-1-songmuchun@bytedance.com Fixes: 0a97c01cd20b ("list_lru: allow explicit memcg and NUMA node selection") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When collecting coverage from softirqs, KCOV uses in_serving_softirq() to
check whether the code is running in the softirq context. Unfortunately,
in_serving_softirq() is > 0 even when the code is running in the hardirq
or NMI context for hardirqs and NMIs that happened during a softirq.
As a result, if a softirq handler contains a remote coverage collection
section and a hardirq with another remote coverage collection section
happens during handling the softirq, KCOV incorrectly detects a nested
softirq coverate collection section and prints a WARNING, as reported by
syzbot.
This issue was exposed by commit a7f3813e589f ("usb: gadget: dummy_hcd:
Switch to hrtimer transfer scheduler"), which switched dummy_hcd to using
hrtimer and made the timer's callback be executed in the hardirq context.
Change the related checks in KCOV to account for this behavior of
in_serving_softirq() and make KCOV ignore remote coverage collection
sections in the hardirq and NMI contexts.
This prevents the WARNING printed by syzbot but does not fix the inability
of KCOV to collect coverage from the __usb_hcd_giveback_urb when dummy_hcd
is in use (caused by a7f3813e589f); a separate patch is required for that.
Link: https://lkml.kernel.org/r/20240729022158.92059-1-andrey.konovalov@linux.dev Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts") Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac Acked-by: Marco Elver <elver@google.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marcello Sylvester Bauer <sylv@sylv.io> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Petr Vorel [Fri, 26 Jul 2024 07:20:09 +0000 (09:20 +0200)]
MAINTAINERS: Update LTP members and web
LTP project uses now readthedocs.org instance instead of GitHub wiki.
LTP maintainers are listed in alphabetical order.
Link: https://lkml.kernel.org/r/20240726072009.1021599-1-pvorel@suse.cz Signed-off-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Li Wang <liwang@redhat.com> Reviewed-by: Cyril Hrubis <chrubis@suse.cz> Cc: Jan Stancek <jstancek@redhat.com> Cc: Xiao Yang <yangx.jy@fujitsu.com> Cc: Yang Xu <xuyang2018.jy@fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") Signed-off-by: Nico Pache <npache@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Steven Rostedt [Wed, 7 Aug 2024 22:54:02 +0000 (18:54 -0400)]
tracefs: Use generic inode RCU for synchronizing freeing
With structure layout randomization enabled for 'struct inode' we need to
avoid overlapping any of the RCU-used / initialized-only-once members,
e.g. i_lru or i_sb_list to not corrupt related list traversals when making
use of the rcu_head.
For an unlucky structure layout of 'struct inode' we may end up with the
following splat when running the ftrace selftests:
The list debug message as well as RBX's symbolic value point out that the
object in question was allocated from 'tracefs_inode_cache' and that the
list's '->next' member is at offset 0. Dumping the layout of the relevant
parts of 'struct tracefs_inode' gives the following:
Above shows that 'vfs_inode.i_lru' overlaps with 'rcu' which will
destroy the 'i_lru' list as soon as the 'rcu' member gets used, e.g. in
call_rcu() or later when calling the RCU callback. This will disturb
concurrent list traversals as well as object reuse which assumes these
list heads will keep their integrity.
For reproduction, the following diff manually overlays 'i_lru' with
'rcu' as, otherwise, one would require some good portion of luck for
gambling an unlucky RANDSTRUCT seed:
@@ -690,7 +691,6 @@ struct inode {
u16 i_wb_frn_avg_time;
u16 i_wb_frn_history;
#endif
- struct list_head i_lru; /* inode LRU list */
struct list_head i_sb_list;
struct list_head i_wb_list; /* backing dev writeback list */
union {
The tracefs inode does not need to supply its own RCU delayed destruction
of its inode. The inode code itself offers both a "destroy_inode()"
callback that gets called when the last reference of the inode is
released, and the "free_inode()" which is called after a RCU
synchronization period from the "destroy_inode()".
The tracefs code can unlink the inode from its list in the destroy_inode()
callback, and the simply free it from the free_inode() callback. This
should provide the same protection.
Link: https://lore.kernel.org/all/20240807115143.45927-3-minipli@grsecurity.net/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ajay Kaher <ajay.kaher@broadcom.com> Cc: Ilkka =?utf-8?b?TmF1bGFww6TDpA==?= <digirigawa@gmail.com> Link: https://lore.kernel.org/20240807185402.61410544@gandalf.local.home Fixes: baa23a8d4360 ("tracefs: Reset permissions on remount if permissions are options") Reported-by: Mathias Krause <minipli@grsecurity.net> Reported-by: Brad Spengler <spender@grsecurity.net> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Jianhui Zhou [Mon, 5 Aug 2024 11:36:31 +0000 (19:36 +0800)]
ring-buffer: Remove unused function ring_buffer_nr_pages()
Because ring_buffer_nr_pages() is not an inline function and user accesses
buffer->buffers[cpu]->nr_pages directly, the function ring_buffer_nr_pages
is removed.
Tze-nan Wu [Mon, 5 Aug 2024 05:59:22 +0000 (13:59 +0800)]
tracing: Fix overflow in get_free_elt()
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Petr Pavlu [Sat, 3 Aug 2024 13:09:26 +0000 (15:09 +0200)]
function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()
When ftrace_graph_ret_addr() is invoked to convert a found stack return
address to its original value, the function can end up producing the
following crash:
cd linux/tools/testing/selftests
make TARGETS='ftrace livepatch'
(cd ftrace; ./ftracetest test.d/ftrace/fgraph-filter.tc)
(cd livepatch; ./test-livepatch.sh)
The problem is that ftrace_graph_ret_addr() is supposed to operate on the
ret_stack of a selected task but wrongly accesses the ret_stack of the
current task. Specifically, the above NULL dereference occurs when
task->curr_ret_stack is non-zero, but current->ret_stack is NULL.
Correct ftrace_graph_ret_addr() to work with the right ret_stack.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/20240803131211.17255-1-petr.pavlu@suse.com Fixes: 7aa1eaef9f42 ("function_graph: Allow multiple users to attach to function graph") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eventfs: Don't return NULL in eventfs_create_dir()
Commit 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing
ei->dentry") added another check, testing if the parent was freed after
we released the mutex. If so, the function returns NULL. However, all
callers expect it to either return a valid pointer or an error pointer,
at least since commit 5264a2f4bb3b ("tracing: Fix a NULL vs IS_ERR() bug
in event_subsystem_dir()"). Returning NULL will therefore fail the error
condition check in the caller.
Fix this by substituting the NULL return value with a fitting error
pointer.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Fixes: 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing ei->dentry") Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com> Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Fri, 26 Jul 2024 18:42:08 +0000 (14:42 -0400)]
tracing: Use refcount for trace_event_file reference counter
Instead of using an atomic counter for the trace_event_file reference
counter, use the refcount interface. It has various checks to make sure
the reference counting is correct, and will warn if it detects an error
(like refcount_inc() on '0').
Steven Rostedt [Tue, 30 Jul 2024 15:06:57 +0000 (11:06 -0400)]
tracing: Have format file honor EVENT_FILE_FL_FREED
When eventfs was introduced, special care had to be done to coordinate the
freeing of the file meta data with the files that are exposed to user
space. The file meta data would have a ref count that is set when the file
is created and would be decremented and freed after the last user that
opened the file closed it. When the file meta data was to be freed, it
would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed,
and any new references made (like new opens or reads) would fail as it is
marked freed. This allowed other meta data to be freed after this flag was
set (under the event_mutex).
All the files that were dynamically created in the events directory had a
pointer to the file meta data and would call event_release() when the last
reference to the user space file was closed. This would be the time that it
is safe to free the file meta data.
A shortcut was made for the "format" file. It's i_private would point to
the "call" entry directly and not point to the file's meta data. This is
because all format files are the same for the same "call", so it was
thought there was no reason to differentiate them. The other files
maintain state (like the "enable", "trigger", etc). But this meant if the
file were to disappear, the "format" file would be unaware of it.
This caused a race that could be trigger via the user_events test (that
would create dynamic events and free them), and running a loop that would
read the user_events format files:
In one console run:
# cd tools/testing/selftests/user_events
# while true; do ./ftrace_test; done
And in another console run:
# cd /sys/kernel/tracing/
# while true; do cat events/user_events/__test_event/format; done 2>/dev/null
With KASAN memory checking, it would trigger a use-after-free bug report
(which was a real bug). This was because the format file was not checking
the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the
event that the file meta data pointed to after the event was freed.
After inspection, there are other locations that were found to not check
the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a
new helper function: event_file_file() that will make sure that the
event_mutex is held, and will return NULL if the trace_event_file has the
EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file
pointer use event_file_file() and check for NULL. Later uses can still use
the event_file_data() helper function if the event_mutex is still held and
was not released since the event_file_file() call.
Anton Khirnov [Mon, 29 Jul 2024 19:58:10 +0000 (21:58 +0200)]
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
This restores behaviour (including the comment) from now-removed
hci_request.c, and also matches existing code for active scanning.
Without this, the duplicates filter is always active when passive
scanning, which makes it impossible to work with devices that send
nontrivial dynamic data in their advertisement reports.
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Anton Khirnov <anton@khirnov.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Unlike qca_regulator_init(), qca_power_shutdown() may be called for
QCA_ROME which does not have qcadev->bt_power assigned. Add a
NULL-pointer check before dereferencing the struct qca_power pointer.
Fixes: eba1718717b0 ("Bluetooth: hci_qca: make pwrseq calls the default if available") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/linux-bluetooth/su3wp6s44hrxf4ijvsdfzbvv4unu4ycb7kkvwbx6ltdafkldir@4g7ydqm2ap5j/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
QCA6390 can albo be used on non-DT systems so we must not make the power
sequencing the only option. Check if the serdev device consumes an OF
node. If so: honor the new contract as per the DT bindings. If not: fall
back to the previous behavior by falling through to the existing
default label.
Fixes: 9a15ce685706 ("Bluetooth: qca: use the power sequencer for QCA6390") Reported-by: Wren Turkal <wt@penguintechs.org> Closes: https://lore.kernel.org/linux-bluetooth/27e6a6c5-fb63-4219-be0b-eefa2c116e06@penguintechs.org/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
Now that we call pwrseq_power_off() for all models that hold a valid
power sequencing handle, we can remove the switch case for QCA_6390. The
switch will now use the default label for this model but that's fine: if
it has the BT-enable GPIO than we should use it.
Fixes: eba1718717b0 ("Bluetooth: hci_qca: make pwrseq calls the default if available") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Faizal Rahim [Sun, 7 Jul 2024 12:53:18 +0000 (08:53 -0400)]
igc: Fix qbv tx latency by setting gtxoffset
A large tx latency issue was discovered during testing when only QBV was
enabled. The issue occurs because gtxoffset was not set when QBV is
active, it was only set when launch time is active.
The patch "igc: Correct the launchtime offset" only sets gtxoffset when
the launchtime_enable field is set by the user. Enabling launchtime_enable
ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as
LaunchT in the SW user manual).
Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states:
"The latency between transmission scheduling (launch time) and the
time the packet is transmitted to the network is listed in Table 7-61."
However, the patch misinterprets the phrase "launch time" in that section
by assuming it specifically refers to the LaunchT register, whereas it
actually denotes the generic term for when a packet is released from the
internal buffer to the MAC transmit logic.
This launch time, as per that section, also implicitly refers to the QBV
gate open time, where a packet waits in the buffer for the QBV gate to
open. Therefore, latency applies whenever QBV is in use. TSN features such
as QBU and QAV reuse QBV, making the latency universal to TSN features.
Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that
the term "launch time" used in Section 7.5.2.6 is not clear and can be
easily misinterpreted. Avi will update this section to:
"When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission
scheduling and the time the packet is transmitted to the network is listed
in Table 7-61."
Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to
write to gtxoffset, aligning with the newly updated SW User Manual.
Tested:
1. Enrol taprio on talker board
base-time 0
cycle-time 1000000
flags 0x2
index 0 cmd S gatemask 0x1 interval1
index 0 cmd S gatemask 0x1 interval2
Note:
interval1 = interval for a 64 bytes packet to go through
interval2 = cycle-time - interval1
2. Take tcpdump on listener board
3. Use udp tai app on talker to send packets to listener
Note that the test result is similar to the patch "igc: Correct the
launchtime offset".
Fixes: 790835fcc0cb ("igc: Correct the launchtime offset") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Faizal Rahim [Sun, 7 Jul 2024 12:53:17 +0000 (08:53 -0400)]
igc: Fix reset adapter logics when tx mode change
Following the "igc: Fix TX Hang issue when QBV Gate is close" changes,
remaining issues with the reset adapter logic in igc_tsn_offload_apply()
have been observed:
1. The reset adapter logics for i225 and i226 differ, although they should
be the same according to the guidelines in I225/6 HW Design Section
7.5.2.1 on software initialization during tx mode changes.
2. The i225 resets adapter every time, even though tx mode doesn't change.
This occurs solely based on the condition igc_is_device_id_i225() when
calling schedule_work().
3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only
resets adapter for legacy->tsn tx mode transitions.
4. qbv_count introduced in the patch is actually not needed; in this
context, a non-zero value of qbv_count is used to indicate if tx mode
was unconditionally set to tsn in igc_tsn_enable_offload(). This could
be replaced by checking the existing register
IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit.
This patch resolves all issues and enters schedule_work() to reset the
adapter only when changing tx mode. It also removes reliance on qbv_count.
qbv_count field will be removed in a future patch.
Test ran:
1. Verify reset adapter behaviour in i225/6:
a) Enrol a new GCL
Reset adapter observed (tx mode change legacy->tsn)
b) Enrol a new GCL without deleting qdisc
No reset adapter observed (tx mode remain tsn->tsn)
c) Delete qdisc
Reset adapter observed (tx mode change tsn->legacy)
2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed"
to confirm it remains resolved.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Faizal Rahim [Sun, 7 Jul 2024 12:53:16 +0000 (08:53 -0400)]
igc: Fix qbv_config_change_errors logics
When user issues these cmds:
1. Either a) or b)
a) mqprio with hardware offload disabled
b) taprio with txtime-assist feature enabled
2. etf
3. tc qdisc delete
4. taprio with base time in the past
At step 4, qbv_config_change_errors wrongly increased by 1.
Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
"If AdminBaseTime specifies a time in the past, and the current schedule
is running, then: Increment ConfigChangeError counter"
qbv_config_change_errors should only increase if base time is in the past
and no taprio is active. In user perspective, taprio was not active when
first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
enabled with a dummy schedule at step 2 where it enters
igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
qbv_count > 1, qbv_config_change_errors value got incremented.
This issue happens due to reliance on qbv_count field where a non-zero
value indicates that taprio is running. But qbv_count increases
regardless if taprio is triggered by user or by other tsn feature. It does
not align with qbv_config_change_errors expectation where it is only
concerned with taprio triggered by user.
Fixing this by relocating the qbv_config_change_errors logic to
igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
inaccuracies from i225/6's multiple uses of qbv feature for other TSN
features.
The new function created: igc_tsn_is_taprio_activated_by_user() uses
taprio_offload_enable field to indicate that the current running taprio
was triggered by user, instead of triggered by non-qbv feature like etf.
Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Faizal Rahim [Sat, 6 Jul 2024 15:38:07 +0000 (11:38 -0400)]
igc: Fix packet still tx after gate close by reducing i226 MAC retry buffer
Testing uncovered that even when the taprio gate is closed, some packets
still transmit.
According to i225/6 hardware errata [1], traffic might overflow the
planned QBV window. This happens because MAC maintains an internal buffer,
primarily for supporting half duplex retries. Therefore, even when the
gate closes, residual MAC data in the buffer may still transmit.
To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes
to the recommended 88 bytes by modifying the RETX_CTL register value.
Note that for TC3, gate should open for 500us and close for another
500us.
3. Take tcpdump log on Board B.
4. Send udp packets via UDP tai app from Board A to Board B.
5. Analyze tcpdump log via wireshark log on Board B. Ensure that the
total time from the first to the last packet received during one cycle
for TC3 does not exceed 500us.
Fixes: 43546211738e ("igc: Add new device ID's") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit ac21add2540e ("ice: Implement driver functionality to dump fec
statistics") introduces obtaining FEC correctable and uncorrectable
stats per netdev in ICE driver. Unfortunately the assignment of values
to fec_stats structure has been done incorrectly. This commit fixes the
assignments.
Fixes: ac21add2540e ("ice: Implement driver functionality to dump fec statistics") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Nitka [Mon, 15 Jul 2024 15:39:11 +0000 (17:39 +0200)]
ice: Skip PTP HW writes during PTP reset procedure
Block HW write access for the driver while the device is in reset to
avoid potential race condition and access to the PTP HW in
non-nominal state which could lead to undesired effects
Fixes: 4aad5335969f ("ice: add individual interrupt allocation") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 7 Aug 2024 16:53:41 +0000 (09:53 -0700)]
Merge tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix double inode unlock for direct IO sync writes (reported by
syzbot)
- fix root tree id/name map definitions, don't use fixed size buffers
for name (reported by -Werror=unterminated-string-initialization)
- fix qgroup reserve leaks in bufferd write path
- update scrub status structure more often so it can be reported in
user space more accurately and let 'resume' not repeat work
- in preparation to remove space cache v1 in the future print a warning
if it's detected
* tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid using fixed char array size for tree names
btrfs: fix double inode unlock for direct IO sync writes
btrfs: emit a warning about space cache v1 being deprecated
btrfs: fix qgroup reserve leaks in cow_file_range
btrfs: implement launder_folio for clearing dirty page reserve
btrfs: scrub: update last_physical after scrubbing one stripe
btrfs: factor out stripe length calculation into a helper
Linus Torvalds [Wed, 7 Aug 2024 16:45:21 +0000 (09:45 -0700)]
Merge tag 'for-v6.11-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"rt5033:
- fix driver regression causing kernel oops
axp288-charger:
- fix charge voltage setup
qcom-battmgr:
- fix thermal zone spamming errors
- fix init on Qualcomm X Elite"
* tag 'for-v6.11-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_battmgr: Ignore extra __le32 in info payload
power: supply: qcom_battmgr: return EAGAIN when firmware service is not up
power: supply: axp288_charger: Round constant_charge_voltage writes down
power: supply: axp288_charger: Fix constant_charge_voltage writes
power: supply: rt5033: Bring back i2c_set_clientdata
Kent Overstreet [Wed, 31 Jul 2024 00:35:59 +0000 (20:35 -0400)]
bcachefs: Add a comment for bucket helper types
We've had bugs in the past with incorrect integer conversions in disk
accounting code, which is why bucket helpers now always return s64s; add
a comment explaining this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Wed, 31 Jul 2024 00:33:25 +0000 (20:33 -0400)]
bcachefs: Don't rely on implicit unsigned -> signed integer conversion
implicit integer conversion is a fertile source of bugs, and we really
would rather not have the min()/max() macros doing it implicitly.
bcachefs appears to be the only place in the kernel where this happens,
so let's fix it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Huacai Chen [Wed, 7 Aug 2024 09:37:11 +0000 (17:37 +0800)]
LoongArch: Use accessors to page table entries instead of direct dereference
As very well explained in commit 20a004e7b017cce282 ("arm64: mm: Use
READ_ONCE/WRITE_ONCE when accessing page tables"), an architecture whose
page table walker can modify the PTE in parallel must use READ_ONCE()/
WRITE_ONCE() macro to avoid any compiler transformation.
So apply that to LoongArch which is such an architecture, in order to
avoid potential problems.
Similar to commit edf955647269422e ("riscv: Use accessors to page table
entries instead of direct dereference").
Miao Wang [Wed, 7 Aug 2024 09:37:11 +0000 (17:37 +0800)]
LoongArch: Enable general EFI poweroff method
efi_shutdown_init() can register a general sys_off handler named
efi_power_off(). Enable this by providing efi_poweroff_required(),
like arm and x86. Since EFI poweroff is also supported on LoongArch,
and the enablement makes the poweroff function usable for hardwares
which lack ACPI S5.
We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only
require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true.
Tristram Ha [Mon, 5 Aug 2024 23:52:00 +0000 (16:52 -0700)]
net: dsa: microchip: Fix Wake-on-LAN check to not return an error
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 6 Aug 2024 14:52:10 +0000 (07:52 -0700)]
Merge tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- Fix ACPI notifier racing with itself (intel-vbtn)
- Initialize local variable to cover a timeout corner case
(intel/ifs)
- WMI docs spelling
New device IDs:
- amd/{pmc,pmf}: AMD 1Ah model 60h series.
- amd/pmf: SPS quirk support for ASUS ROG Ally X"
* tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Initialize union ifs_status to zero
platform/x86: msi-wmi-platform: Fix spelling mistakes
platform/x86/amd/pmf: Add new ACPI ID AMDI0107
platform/x86/amd/pmc: Send OS_HINT command for new AMD platform
platform/x86/amd: pmf: Add quirk for ROG Ally X
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
Nikolay Aleksandrov [Fri, 2 Aug 2024 08:07:30 +0000 (11:07 +0300)]
net: bridge: mcast: wait for previous gc cycles when removing port
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
Linus Torvalds [Mon, 5 Aug 2024 21:31:12 +0000 (14:31 -0700)]
Merge tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
Linus Torvalds [Mon, 5 Aug 2024 16:23:00 +0000 (09:23 -0700)]
Merge tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Since v6.8 we've had a subtle breakage in SLUB with KFENCE enabled,
that can cause a crash. It hasn't been found earlier due to quite
specific conditions necessary (OOM during kmem_cache_alloc_bulk())"
* tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slub: do not call do_slab_free for kfence object
David S. Miller [Mon, 5 Aug 2024 10:10:22 +0000 (11:10 +0100)]
Merge branch 'virtio-net-rq-coalescing' into main
Heng Qi says:
====================
virtio-net: unbreak vq resizing if vq coalescing is not supported
Currently, if the driver does not negotiate the vq coalescing feature
but supports vq resize, the vq resize action, which could have been
successfully executed, is interrupted due to the failure in configuring
the vq coalescing parameters. This issue needs to be fixed.
Changelog
=========
v3->v4:
- Add a comment for patch[2/2].
v2->v3:
- Break out the feature check and the fix into separate patches.
v1->v2:
- Rephrase the subject.
- Put the feature check inside the virtnet_send_{r,t}x_ctrl_coal_vq_cmd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heng Qi [Thu, 1 Aug 2024 13:23:38 +0000 (21:23 +0800)]
virtio-net: unbreak vq resizing when coalescing is not negotiated
Don't break the resize action if the vq coalescing feature
named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated.
Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Eugenio Pé rez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / users / hch / configfs.git / log