Ben Skeggs [Tue, 19 Sep 2023 21:56:24 +0000 (17:56 -0400)]
drm/nouveau/kms/nv50-: split DP disable+enable into two modesets
Link training can finally be moved out of the supervisor sequence,
but first we need to split DP modesets into separate disable and
enable sequences to be able to perform link training between them
instead.
- adds tracking for post-UPDATE modeset operations, similar to mst[mo]'s
- audio won't work on RM without this
- we should probably have been doing this anyway
Ben Skeggs [Tue, 19 Sep 2023 21:56:08 +0000 (17:56 -0400)]
drm/nouveau/disp: add acquire_sor/pior()
- preparing to move protocol-specific args out of acquire() again
- avoid re-acquiring acquired output, will matter when enforced later
- sor/pior done at same time due to shared tmds/dp handling
Ben Skeggs [Tue, 19 Sep 2023 21:56:07 +0000 (17:56 -0400)]
drm/nouveau/disp: add acquire_dac()
- preparing to move protocol-specific args out of acquire() again
- avoid re-acquiring acquired output, will matter when enforced later
- this one is basically just a rename
Lyude Paul [Tue, 19 Sep 2023 21:56:05 +0000 (17:56 -0400)]
drm/nouveau/kms: Add INHERIT ioctl to nvkm/nvif for reading IOR state
Now that we're supporting things like Ada and the GSP, there's situations
where we really need to actually know the display state that we're starting
with when loading the driver in order to prevent breaking GSP expectations.
The first step in doing this is making it so that we can read the current
state of IORs from nvkm in DRM, so that we can fill in said into into the
atomic state.
We do this by introducing an INHERIT ioctl to nvkm/nvif. This is basically
another form of ACQUIRE, except that it will only acquire the given output
path for userspace if it's already set up in hardware. This way, we can go
through and probe each outp object we have in DRM in order to figure out
the current hardware state of each one. If the outp isn't in use, it simply
returns -ENODEV.
This is also part of the work that will be required for implementing GSP
support for display. While the GSP should mostly work without this commit,
this commit should fix some edge case bugs that can occur on initial driver
load. This also paves the way for some of the initial groundwork for
fastboot support.
Imre Deak [Wed, 13 Sep 2023 22:32:17 +0000 (01:32 +0300)]
drm/dp_mst: Tune down error message during payload addition
If a sink is removed in the middle of payload addition the corresponding
AUX transfer will fail as expected, so tune the error message down to a
debug messge.
Imre Deak [Wed, 13 Sep 2023 22:32:16 +0000 (01:32 +0300)]
drm/dp_mst: Sanitize error return during payload addition
Return an error during payload addition if the payload port isn't
found. This shouldn't change the behavior since only the i915 driver
checks the return value, printing an error message in case of a failure.
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230913223218.540365-1-imre.deak@intel.com
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer without unnecessarily NUL-padding.
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer without unnecessarily NUL-padding.
There is likely no bug in the current implementation due to the safeguard:
| cname[sizeof(cname) - 1] = '\0';
... however we can provide simpler and easier to understand code using
the newer (and recommended) `strscpy` api.
`strncpy` is deprecated and as such we should prefer more robust and
less ambiguous string interfaces.
A suitable replacement is `strscpy_pad` due to the fact that it
guarantees NUL-termination on the destination buffer whilst also
maintaining the NUL-padding behavior that `strncpy` provides. I am not
sure whether NUL-padding is strictly needed but I see in
`nvif_object_ctor()` args is memcpy'd elsewhere so I figured we'd keep
the same functionality.
Jani Nikula [Thu, 14 Sep 2023 13:19:51 +0000 (16:19 +0300)]
MAINTAINERS: add drm_bridge_connector.[ch] files under bridge chips
Clearly this should be under bridge chips.
Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230914131951.2473844-1-jani.nikula@intel.com
Jani Nikula [Thu, 14 Sep 2023 13:11:59 +0000 (16:11 +0300)]
drm: bridge: it66121: ->get_edid callback must not return err pointers
The drm stack does not expect error valued pointers for EDID anywhere.
Fixes: e66856508746 ("drm: bridge: it66121: Set DDC preamble only once before reading EDID") Cc: Paul Cercueil <paul@crapouillou.net> Cc: Robert Foss <robert.foss@linaro.org> Cc: Phong LE <ple@baylibre.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230914131159.2472513-1-jani.nikula@intel.com
drm/ssd130x: Store the HW buffer in the driver-private CRTC state
The commit 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the allocation of the intermediate and
HW buffers from the encoder's .atomic_enable callback, to the plane's
.atomic_check callback.
This was suggested by Maxime Ripard, because drivers aren't allowed to
fail after the drm_atomic_helper_swap_state() function has been called.
And the encoder's .atomic_enable happens after the new atomic state has
been swapped, so allocations (that can fail) shouldn't be done there.
But the HW buffer isn't really tied to the plane's state. It has a fixed
size that only depends on the (also fixed) display resolution defined in
the Device Tree Blob.
That buffer can be considered part of the CRTC state, and for this reason
makes more sense to do its allocation in the CRTC .atomic_check callback.
The other allocated buffer (used to store a conversion from the emulated
XR24 format to the native R1 format) is part of the plane's state, since
it will be optional once the driver supports R1 and allows user-space to
set that pixel format.
So let's keep the allocation for it in the plane's .atomic_check callback,
this can't be moved to the CRTC's .atomic_check because changing a format
does not trigger a CRTC mode set.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/dri-devel/CAMuHMdWv_QSatDgihr8=2SXHhvp=icNxumZcZOPwT9Q_QiogNQ@mail.gmail.com/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230913052938.1114651-1-javierm@redhat.com
drm/amd/display: Fix -Wuninitialized in dm_helpers_dp_mst_send_payload_allocation()
When building with clang, there is a warning (or error when
CONFIG_WERROR is set):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:368:21: error: variable 'old_payload' is uninitialized when used here [-Werror,-Wuninitialized]
368 | new_payload, old_payload);
| ^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:344:61: note: initialize the variable 'old_payload' to silence this warning
344 | struct drm_dp_mst_atomic_payload *new_payload, *old_payload;
| ^
| = NULL
1 error generated.
This variable is not required outside of this function so allocate
old_payload on the stack and pass it by reference to
dm_helpers_construct_old_payload(), resolving the warning.
Douglas Anderson [Fri, 1 Sep 2023 23:41:14 +0000 (16:41 -0700)]
drm/ingenic: Call drm_atomic_helper_shutdown() at shutdown time
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
Since this driver uses the component model and shutdown happens at the
base driver, we communicate whether we have to call
drm_atomic_helper_shutdown() by seeing if drvdata is non-NULL.
Douglas Anderson [Fri, 1 Sep 2023 23:41:24 +0000 (16:41 -0700)]
drm/imx/ipuv3: Call drm_atomic_helper_shutdown() at shutdown/unbind time
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Douglas Anderson [Fri, 1 Sep 2023 23:39:52 +0000 (16:39 -0700)]
drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop
As with other places in the Linux kernel--kfree(NULL) being the most
famous example--it's convenient to treat being passed a NULL argument
as a noop in cleanup functions. Let's make
drm_atomic_helper_shutdown() work like this.
This is convenient for DRM devices that use the "component" model. On
these devices we want shutdown to be a noop if the bind() call of the
component hasn't been called yet. As long as drivers are careful to
make sure the drvdata is NULL whenever the driver is not bound then we
can just do a simple call to drm_atomic_helper_shutdown() with the
drvdata at shutdown time.
Douglas Anderson [Wed, 6 Sep 2023 14:28:03 +0000 (07:28 -0700)]
MAINTAINERS: Update DRM DRIVERS FOR FREESCALE IMX entry
As per the discussion on the lists [1], changes to this driver
generally flow through drm-misc. If they need to be coordinated with
v4l2 they sometimes go through Philipp Zabel's tree instead. List both
trees in MAINTAINERS. Also update the title of this driver to specify
that it's just for IMX 5/6 since, as per Philipp "There are a lot more
i.MX that do not use IPUv3 than those that do."
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
For the "otm8009a" driver we fully remove the storing of the "enabled"
state and we remove the double-checking, but we still keep the storing
of the "prepared" state since the backlight code in the driver checks
it. This backlight code may not be perfectly safe since there doesn't
appear to be sufficient synchronization between the backlight driver
(which userspace can call into directly) and the code that's
unpreparing the panel. However, this lack of safety is not new and can
be addressed in a future patch.
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
For the s6e63m0 panel driver, this actually fixes a subtle/minor error
handling bug in s6e63m0_prepare(). In one error case s6e63m0_prepare()
called s6e63m0_unprepare() directly if there was an error. This call
to s6e63m0_unprepare() would have been a no-op since ctx->prepared
wasn't set yet.
Douglas Anderson [Fri, 4 Aug 2023 21:06:04 +0000 (14:06 -0700)]
drm/panel: Don't store+check prepared/enabled for simple cases
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
This pile of panel drivers appears to be simple to handle. Based on
code inspection they seemed to be using the prepared/enabled state
simply for double-checking that nothing else in the kernel called them
inconsistently. Now that the core drm_panel is doing the double
checking (and warning) it should be very clear that these devices
don't need their own double-check.
Problem statement: The current method roundup_power_of_two()
to allocate contiguous address triggers -ENOSPC in some cases
even though we have enough free spaces and so to help with
that we introduce a try harder mechanism.
In case of -ENOSPC, the new try harder mechanism rounddown the
original size to power of 2 and iterating over the round down
sized freelist blocks to allocate the required size traversing
RHS and LHS.
As part of the above new method implementation we moved
contiguous/alignment size computation part and trim function
to the drm buddy file.
v2: Modify the alloc_range() function to return total allocated size
on -ENOSPC err and traverse RHS/LHS to allocate the required
size (Matthew).
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:05 +0000 (10:52 +0200)]
fbdev/core: Remove empty internal helpers from fb_logo.c
Remove the two empty helpers for the case the CONFIG_FB_LOGO_EXTRA
has not been set. They are internal functions and only called once.
Providing empty replacements seems like overkill. Instead protect
the call sites with a test for CONFIG_FB_LOGO_EXTRA.
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:04 +0000 (10:52 +0200)]
fbdev/core: Move logo functions into separate source file
Move the fbdev function for displaying boot-up logos into their
own file fb_logo.c. Only build fb_logo.c if CONFIG_LOGO has been
selected. No functional changes.
v2:
* include fb_internal.h (kernel test robot)
* simplify option-parsing ifdefs
* build fb_logo.o iff CONFIG_LOGO has been set
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:03 +0000 (10:52 +0200)]
fbdev/core: Unexport logo helpers
The interfaces for the fbdev logo are not used outside of the fbdev
module. Hence declare the fbdev logo functions in the internal header
file and remove their symbol exports. Only build the functions if
CONFIG_LOGO has been selected.
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:02 +0000 (10:52 +0200)]
fbdev/core: Fix style of code for boot-up logo
Fix a number of warnings from checkpatch.pl in this code before
moving it into a separate file. This includes
* Prefer 'unsigned int' to bare use of 'unsigned'
* space required after that ',' (ctx:VxV)
* space prohibited after that open parenthesis '('
* suspect code indent for conditional statements (16, 32)
* braces {} are not necessary for single statement blocks
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:01 +0000 (10:52 +0200)]
fbdev/mmp/mmpfb: Do not display boot-up logo
The fbcon module takes care of displaying the logo, if any. Remove
the code form mmpfb. It is probably no tworking as expected, as it
interferes with the framebuffer console. If we want to display the
logo without fbcon, we should implement this in the fbdev core code.
Thomas Zimmermann [Thu, 7 Sep 2023 08:52:00 +0000 (10:52 +0200)]
fbdev/au1200fb: Do not display boot-up logo
The fbcon module takes care of displaying the logo, if any. Remove
the code form au1200fb. If we want to display the logo without fbcon,
we should implement this in the fbdev core code.
Geert Uytterhoeven [Thu, 24 Aug 2023 15:08:41 +0000 (17:08 +0200)]
drm/ssd130x: Use bool for ssd130x_deviceinfo flags
The .need_pwm and .need_chargepump fields in struct ssd130x_deviceinfo
are flags that can have only two possible values: 0 and 1.
Reduce kernel size by changing their types from int to bool.
Geert Uytterhoeven [Thu, 24 Aug 2023 15:08:40 +0000 (17:08 +0200)]
drm/ssd130x: Fix screen clearing
Due to the reuse of buffers, ssd130x_clear_screen() no longers clears
the screen, but merely redraws the last image that is residing in the
intermediate buffer.
As there is no point in clearing the intermediate buffer and transposing
an all-black image, fix this by just clearing the HW format buffer, and
writing it to the panel.
drm/ssd130x: Print the PWM's label instead of its number
struct pwm_device::pwm is a write-only variable in the pwm core and used
nowhere apart from this and another dev_dbg. So it isn't useful to
identify the used PWM. Emit the PWM's label instead in the debug
message.
Uwe Kleine-König [Sun, 7 May 2023 16:26:02 +0000 (18:26 +0200)]
drm/shmobile: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Sun, 7 May 2023 16:25:54 +0000 (18:25 +0200)]
drm/msm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the msm drm drivers from always returning zero in the
remove callback to the void returning variant.
Uwe Kleine-König [Sun, 7 May 2023 16:25:52 +0000 (18:25 +0200)]
drm/mediatek: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the mediatek drm drivers from always returning zero in
the remove callback to the void returning variant.
Uwe Kleine-König [Sun, 7 May 2023 16:25:51 +0000 (18:25 +0200)]
drm/mediatek: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Sun, 7 May 2023 16:25:46 +0000 (18:25 +0200)]
drm/ingenic: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the ingenic drm drivers from always returning zero in
the remove callback to the void returning variant.
Uwe Kleine-König [Sun, 7 May 2023 16:25:45 +0000 (18:25 +0200)]
drm/imx/ipuv3: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the ipuv3 imx drivers from always returning zero in
the remove callback to the void returning variant.
Wayne Lin [Mon, 7 Aug 2023 02:56:38 +0000 (10:56 +0800)]
drm/mst: Refactor the flow for payload allocation/removement
[Why]
Today, the allocation/deallocation steps and status is a bit unclear.
For instance, payload->vc_start_slot = -1 stands for "the failure of
updating DPCD payload ID table" and can also represent as "payload is not
allocated yet". These two cases should be handled differently and hence
better to distinguish them for better understanding.
[How]
Define enumeration - ALLOCATION_LOCAL, ALLOCATION_DFP and ALLOCATION_REMOTE
to distinguish different allocation status. Adjust the code to handle
different status accordingly for better understanding the sequence of
payload allocation and payload removement.
For payload creation, the procedure should look like this:
DRM part 1:
* step 1 - update sw mst mgr variables to add a new payload
* step 2 - add payload at immediate DFP DPCD payload table
Driver:
* Add new payload in HW and sync up with DFP by sending ACT
DRM Part 2:
* Send ALLOCATE_PAYLOAD sideband message to allocate bandwidth along the
virtual channel.
And as for payload removement, the procedure should look like this:
DRM part 1:
* step 1 - Send ALLOCATE_PAYLOAD sideband message to release bandwidth
along the virtual channel
* step 2 - Clear payload allocation at immediate DFP DPCD payload table
Driver:
* Remove the payload in HW and sync up with DFP by sending ACT
DRM part 2:
* update sw mst mgr variables to remove the payload
Note that it's fine to fail when communicate with the branch device
connected at immediate downstrean-facing port, but updating variables of
SW mst mgr and HW configuration should be conducted anyway. That's because
it's under commit_tail and we need to complete the HW programming.
Changes since v1:
* Remove the set but not use variable 'old_payload' in function
'nv50_msto_prepare'. Catched by kernel test robot <lkp@intel.com>
Wayne Lin [Mon, 7 Aug 2023 02:56:37 +0000 (10:56 +0800)]
drm/mst: delete unnecessary case in drm_dp_add_payload_part2()
[Why]
There is no need to consider payload->delete case since we won't call
drm_dp_add_payload_part2() to create a payload when we're about to
remove it.
[How]
Delete unnecessary case to simplify the code.
Arthur Grillo [Fri, 1 Sep 2023 18:52:56 +0000 (15:52 -0300)]
drm/tests: Zero initialize fourccs_out
fourccs_out array is not initialized. As the
drm_fb_build_fourcc_list() doesn't necessarily change all the array,
and the test compares all of it, the comparison could fail if the
array is not initialized. Zero initialize the array to fix this.
Rodrigo Vivi [Tue, 29 Aug 2023 16:30:02 +0000 (12:30 -0400)]
drm/doc/rfc: Mark Dev_coredump as completed.
Xe is already using devcoredump infrastructure as the primary
error state and all the changes needed for user space error
replay and other useful logs are getting added into xe_devcoredump.
The drm_colorspace enum member DRM_MODE_COLORIMETRY_COUNT has been
properly documented by moving the description out of the enum to the
member description list to get rid of an additional warning and improve
documentation clarity.
Biju Das [Thu, 31 Aug 2023 08:09:37 +0000 (09:09 +0100)]
drm/bridge: Drop CONFIG_OF conditionals around of_node pointers
Having conditional around the of_node pointers turns out to make driver
code use ugly #ifdef and #if blocks. So drop the conditionals.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-4-biju.das.jz@bp.renesas.com
Biju Das [Thu, 31 Aug 2023 08:09:36 +0000 (09:09 +0100)]
drm/bridge: Drop conditionals around of_node pointers
This patch is based on commit c9e358dfc4a8 ("driver-core: remove
conditionals around devicetree pointers").
Having conditional around the of_node pointer of the drm_bridge
structure turns out to make driver code use ugly #ifdef blocks. Drop the
conditionals to simplify drivers. While this slightly increases the size
of struct drm_bridge on non-OF system, the number of bridges used today
and foreseen tomorrow on those systems is very low, so this shouldn't be
an issue.
So drop #if conditionals by adding struct device_node forward declaration.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-3-biju.das.jz@bp.renesas.com
Biju Das [Thu, 31 Aug 2023 08:09:35 +0000 (09:09 +0100)]
drm/bridge/analogix/anx78xx: Drop ID table
The driver has an ID table, but it uses the wrong API for retrieving match
data and that will lead to a crash, if it is instantiated by user space or
using ID. From this, there is no user for the ID table and let's drop it
from the driver as it saves some memory.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-2-biju.das.jz@bp.renesas.com
The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init to fail when DRM_BRIDGE_ATTACH_NO_CONNECTOR is used.
Tomi Valkeinen [Fri, 4 Aug 2023 10:48:12 +0000 (13:48 +0300)]
drm/bridge: lt8912b: Manually disable HPD only if it was enabled
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.
Add the check to avoid wrongly calling drm_bridge_hpd_disable().
Tomi Valkeinen [Fri, 4 Aug 2023 10:48:11 +0000 (13:48 +0300)]
drm/bridge: lt8912b: Fix crash on bridge detach
The lt8912b driver, in its bridge detach function, calls
drm_connector_unregister() and drm_connector_cleanup().
drm_connector_unregister() should be called only for connectors
explicitly registered with drm_connector_register(), which is not the
case in lt8912b.
The driver's drm_connector_funcs.destroy hook is set to
drm_connector_cleanup().
Thus the driver should not call either drm_connector_unregister() nor
drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a
crash on bridge detach:
Tomi Valkeinen [Fri, 4 Aug 2023 10:48:10 +0000 (13:48 +0300)]
drm/bridge: lt8912b: Fix bridge_detach
The driver calls lt8912_bridge_detach() from its lt8912_remove()
function. As the DRM core detaches bridges automatically, this leads to
calling lt8912_bridge_detach() twice. The code probably has tried to
manage the double-call with the 'is_attached' variable, but the driver
never sets the variable to false, so its of no help.
Fix the issue by dropping the call to lt8912_bridge_detach() from
lt8912_remove(), as the DRM core will handle the detach call for us,
and also drop the useless is_attached field.
Biju Das [Fri, 18 Aug 2023 19:18:16 +0000 (20:18 +0100)]
drm: bridge: it66121: Extend match support for OF tables
The driver has OF match table, still it uses ID lookup table for
retrieving match data. Currently the driver is working on the
assumption that a I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using of_device_match_data() if the devices are registered via OF.
Thomas Zimmermann [Mon, 28 Aug 2023 13:14:24 +0000 (15:14 +0200)]
staging/fbtft: Use fb_ops helpers for deferred I/O
Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with an fbdev initializer macro.
Thomas Zimmermann [Mon, 28 Aug 2023 13:14:23 +0000 (15:14 +0200)]
staging/fbtft: Initialize fb_op struct as static const
Replace dynamic allocation of the fb_ops instance with static
allocation. Initialize the fields at module-load time. The owner
field changes to THIS_MODULE, as in all other fbdev drivers.
Thomas Zimmermann [Mon, 28 Aug 2023 13:14:22 +0000 (15:14 +0200)]
hid/picolcd: Use fb_ops helpers for deferred I/O
Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with an fbdev initializer macro.
Thomas Zimmermann [Mon, 28 Aug 2023 13:14:20 +0000 (15:14 +0200)]
fbdev/hyperv_fb: Use fb_ops helpers for deferred I/O
Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_IOMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.
The hyperv_fb driver is incomplete in its handling of deferred I/O
and damage framebuffers. Write operations do no trigger damage handling.
Fixing this is beyond the scope of this patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230828132131.29295-5-tzimmermann@suse.de
The new Kconfig macro FB_IOMEM_HELPERS_DEFERRED selects fbdev's
helpers for device I/O memory and deferred I/O. Drivers should
use it if they perform damage updates on device I/O memory.
Thomas Zimmermann [Mon, 28 Aug 2023 13:14:18 +0000 (15:14 +0200)]
fbdev/udlfb: Use fb_ops helpers for deferred I/O
Generate callback functions for struct fb_ops with the fbdev macro
FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(). Initialize struct fb_ops to
the generated functions with fbdev initializer macros.
projects / users / dwmw2 / linux.git / log