Ming Qian [Thu, 12 Jan 2023 09:47:02 +0000 (10:47 +0100)]
media: imx-jpeg: Apply clk_bulk api instead of operating specific clk
using the api of clk_bulk can simplify the code.
and the clock of the jpeg codec may be changed,
the clk_bulk api can be compatible with the future change.
Fixes: 4c2e5156d9fa ("media: imx-jpeg: Add pm-runtime support for imx-jpeg") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Thu, 5 Jan 2023 18:44:03 +0000 (19:44 +0100)]
media: rkisp1: make a few const arrays static
Don't populate the const arrays on the stack, instead make them
static. Also makes the object code smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Thu, 5 Jan 2023 18:33:14 +0000 (19:33 +0100)]
media: vidtv: make const array DURATION static
Don't populate the read-only const array DURATION on the stack but
instead make it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Deepak R Varma [Tue, 3 Jan 2023 17:38:20 +0000 (18:38 +0100)]
media: staging: media: imx: change imx_media_fim_set_stream() to return void
At present, the function imx_media_fim_set_stream() always returns 0.
So, convert it to be a function returning void instead. Issue identified
using the returnvar.cocci Coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nicolas Dufresne [Fri, 23 Dec 2022 18:16:47 +0000 (19:16 +0100)]
media: hantro: Fix JPEG encoder ENUM_FRMSIZE on RK3399
Since 79c987de8b354, enumerating framesize on format set with "MODE_NONE"
(any raw formats) is reporting an invalid frmsize.
Size: Stepwise 0x0 - 0x0 with step 0/0
Before this change, the driver would return EINVAL, which is also invalid
but worked in GStreamer. The original intent was not to implement it, hence
the -ENOTTY return in this change. While drivers should implement
ENUM_FRMSIZE for all formats and queues, this change is limited in scope to
fix the regression.
This fixes taking picture in Gnome Cheese software, or any software using
GSteamer to encode JPEG with hardware acceleration.
Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities") Reported-by: Robert Mader <robert.mader@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Robert Mader <robert.mader@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ming Qian [Fri, 16 Dec 2022 09:08:44 +0000 (10:08 +0100)]
media: v4l2-jpeg: ignore the unknown APP14 marker
The legal identifier of APP14 is "Adobe\0",
but sometimes it may be
"This is an unknown APP marker . Compliant decoders must ignore it."
In this case, just ignore it.
It won't affect the decode result.
Fixes: b8035f7988a8 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ming Qian [Fri, 16 Dec 2022 08:30:33 +0000 (09:30 +0100)]
media: v4l2-jpeg: correct the skip count in jpeg_parse_app14_data
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data.
1. jpeg_get_word_be(stream), it goes forward 2 bytes.
2. jpeg_skip(stream, 11), it goes forward 11 bytes.
3. jpeg_get_byte(stream), it goes forward 1 bytes.
so the remain bytes of this segment should be (lp - 2 - 11 - 1),
but not (lp - 2 - 11).
if driver skip 1 extra bytes, the following parsing may go wrong.
Fixes: b8035f7988a8 ("media: Add parsing for APP14 data segment in jpeg helpers") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new mdp3 driver uses 'select' to force-enable a couple of drivers
it depends on. This is error-prone and likely to cause dependency
loops as well as warnings like:
This specific warning was already addressed in a previous patch,
but there are similar unnecessary 'select' statements, so turn those
into 'depends on'. This also means the dependency on ARCH_MEDIATEK
is redundant and can be dropped.
Marking a case of the switch statement as unreachable means the
compiler treats it as undefined behavior, which is then caught by
an objtool warning:
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable()
Instead of simply continuing execution at a random place of the
driver, print a warning and return from to the caller, which
makes it possible to understand what happens and avoids the
warning.
Fixes: 53655d2a0ff2 ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Qiheng Lin [Fri, 2 Dec 2022 10:18:36 +0000 (11:18 +0100)]
media: platform: mtk-mdp3: Fix return value check in mdp_probe()
In case of error, the function mtk_mutex_get()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
And also fix the err_free_mutex case.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Wed, 30 Nov 2022 11:15:13 +0000 (12:15 +0100)]
media: videobuf2-core: drop obsolete sanity check in __vb2_queue_free()
The sanity check in __vb2_queue_free() is obsolete ever since commit f035eb4e976e ("[media] videobuf2: fix lockdep warning"). Remove it and
let __vb2_queue_free() return void.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dmitry Torokhov [Mon, 28 Nov 2022 19:49:45 +0000 (20:49 +0100)]
media: i2c: s5c73m3: remove support for platform data
There are no existing users of s5c73m3_platform_data in the tree, and
new users should either be using device tree, ACPI, or static device
properties, so let's remove it from the driver.
Eugen Hristev [Mon, 28 Nov 2022 14:07:17 +0000 (15:07 +0100)]
media: microchip: microchip-isc: replace v4l2_{dbg|info|err} with dev-*
v4l2_dbg and friends are legacy and should be removed.
Replaced all the calls with dev_dbg equivalent.
This also removes the 'debug' module parameter which has become obsolete.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Thu, 26 Jan 2023 16:59:09 +0000 (17:59 +0100)]
media: i2c: ov5670: Handle RO controls in set_ctrl
The ov5670 driver registers three controls as read-only:
- V4L2_CID_PIXEL_RATE
- V4L2_CID_LINK_FREQ
- V4L2_CID_HBLANK
The driver updates the range of HBLANK with __v4l2_ctrl_modify_range()
and updates the values of PIXEL_RATE and LINK_FREQ with an
explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time.
This causes the .set_ctrl handler to be called on these controls
causing a non-fatal warning to be emitted:
ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824
This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE
currently only support a single value, and the v4l2-ctrl framework skips
calling .set_ctrl() if the current control value is not changed.
Expand the ov5670_set_ctrl() callback to handle the above controls
to remove the above warning and defend against future expansions
of the supported pixel rates and link frequencies.
Also be stricter and return an error value if a control is actually not
handled.
Jean-Michel Hautbois [Thu, 26 Jan 2023 16:59:08 +0000 (17:59 +0100)]
media: i2c: ov5670: Add .get_selection() support
Add support for the .get_selection() pad operation to the ov5670 sensor
driver.
Report the native sensor size (pixel array), the crop bounds (readable
pixel array area) and the current and default analog crop rectangles.
Currently all driver's modes use an analog crop rectangle of size
[12, 4, 2600, 1952]. Instead of hardcoding the value in the operation
implementation, ad an .analog_crop field to the sensor's modes
definitions, to make sure that if any mode gets added, its crop
rectangle will be defined as well.
While at it re-sort the modes' field definition order to match the
declaration order and initialize the crop rectangle in init_cfg().
[Sakari Ailus: Fix a typo on comments (03800 -> 0x3800)]
The top-left coordinate is gotten from the registers specified in the
modes which are identical for both currently supported modes.
There are currently two modes supported by this driver: 2592*1944 and
1296*972. The second mode is obtained thanks to subsampling while
keeping the same field of view (FoV). No cropping involved, hence the
harcoded values.
Jai Luthra [Tue, 17 Jan 2023 08:16:23 +0000 (09:16 +0100)]
media: i2c: imx219: Fix binning for RAW8 capture
2x2 binning works fine for RAW10 capture, but for RAW8 1232p mode it
leads to corrupted frames [1][2].
Using the special 2x2 analog binning mode fixes the issue, but causes
artefacts for RAW10 1232p capture. So here we choose the binning mode
depending upon the frame format selected.
As both binning modes work fine for 480p RAW8 and RAW10 capture, it can
share the same code path as 1232p for selecting binning mode.
Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format") Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Tue, 23 Aug 2022 00:58:22 +0000 (02:58 +0200)]
media: i2c: IMX296 camera sensor driver
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver
supports cropping and binning (but not both at the same time due to
hardware limitations) and exposure, gain, vertical blanking and test
pattern controls.
Preliminary support is also included for the color IMX296LQR sensor.
[Sakari Ailus: Make driver's remove function return void]
Paul Elder [Mon, 28 Nov 2022 08:02:01 +0000 (09:02 +0100)]
media: ov5640: Fix analogue gain control
Gain control is badly documented in publicly available (including
leaked) documentation.
There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.
There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.
The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.
One version of the datasheet indicates that the sensor supports a
digital gain:
The OV5640 supports 1/2/4 digital gain. Normally, the gain is
controlled automatically by the automatic gain control (AGC) block.
It isn't clear how that would be controlled manually.
There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as
0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain
If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
0x70 is 4x gain
(The second part of the text makes little sense)
"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.
The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.
If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked.
Laurent Pinchart [Mon, 12 Dec 2022 13:25:05 +0000 (14:25 +0100)]
media: mc: entity: Fix minor issues in comments and documentation
Commit ae219872834a ("media: mc: entity: Rewrite
media_pipeline_start()") incorrectly referred to entity instead of pad
in a comment, and forgot to update a second comment accordingly when
moving the pipe from entity to pad. Furthermore, it didn't properly
reflow the documentation text it updated.
Laurent Pinchart [Mon, 12 Dec 2022 13:25:04 +0000 (14:25 +0100)]
media: mc: Get media_device directly from pad
Various functions access the media_device from a pad by going through
the entity the pad belongs to. Remove the level of indirection and get
the media_device from the pad directly.
Fixes: 9e3576a1ae2b ("media: mc: convert pipeline funcs to take media_pad") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Alexander Stein [Tue, 13 Dec 2022 14:07:27 +0000 (15:07 +0100)]
media: i2c: ov9282: Switch to use dev_err_probe helper
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Wed, 21 Dec 2022 09:33:40 +0000 (10:33 +0100)]
media: ti: omap4iss: Use media_pipeline_for_each_entity()
Replace usage of the deprecated media graph walk API with the new
media_pipeline_for_each_entity() and media_pipeline_for_each_pad()
macros.
Even though the entity iterator may seem a better match when build the
entity bitmap in iss_video_stream(), it would not be more efficient as
it would still iterate internally over all pads. As the entity iterator
requires explicit iterator initialization and cleanup calls, the code
would be more complex.
Laurent Pinchart [Wed, 21 Dec 2022 09:33:38 +0000 (10:33 +0100)]
media: mc: entity: Add entity iterator for media_pipeline
Add a media_pipeline_for_each_entity() macro to iterate over entities in
a pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Deprecate the media_graph_walk API to indicate it shouldn't be used in
new drivers.
Laurent Pinchart [Wed, 21 Dec 2022 09:33:37 +0000 (10:33 +0100)]
media: mc: entity: Add pad iterator for media_pipeline
Add a media_pipeline_for_each_pad() macro to iterate over pads in a
pipeline. This should be used by driver as a replacement of the
media_graph_walk API, as iterating over the media_pipeline uses the
cached list of pads and is thus more efficient.
Jai Luthra [Tue, 3 Jan 2023 12:27:36 +0000 (13:27 +0100)]
media: ov5640: Handle delays when no reset_gpio set
Some module manufacturers [1][2] don't expose the RESETB and PWDN pins
of the sensor directly through the 15-pin FFC connector. Instead wiring
~PWDN gpio to the sensor pins with appropriate delays.
In such cases, reset_gpio will not be available to the driver, but it
will still be toggled when the sensor is powered on, and thus we should
still honor the wait time of >= 5ms + 1ms + 20ms (see figure 2-3 in [3])
before attempting any i/o operations over SCCB.
Also, rename the function to ov5640_powerup_sequence to better match the
datasheet (section 2.7).
Jai Luthra [Tue, 3 Jan 2023 12:27:35 +0000 (13:27 +0100)]
media: ov5640: Fix soft reset sequence and timings
Move the register-based reset out of the init_setting[] and into the
powerup_sequence function. The sensor is power cycled and reset using
the gpio pins so the soft reset is not always necessary.
This also ensures that soft reset honors the timing sequence
from the datasheet [1].
Nicholas Roth [Mon, 16 Jan 2023 15:44:48 +0000 (16:44 +0100)]
media: i2c: Add driver for OmniVision OV8858
Add a driver for OmniVision OV8858 image sensor.
The driver currently supports operations with 2 and 4 data lanes, in
full resolution and half-binned resolution modes.
The driver has been upported from the PinephonePro BSP available at
https://gitlab.com/pine64-org/linux.git
at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
name").
There's no need to check for an incorrect number of data lanes in
imx290_set_data_lanes() as the value is validated at probe() time. Drop
the check.
The PHY_LANE_NUM and CSI_LANE_MODE registers are programmed with a value
equal to the number of lanes minus one. Compute it instead of handling
it in the switch/case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:51 +0000 (15:44 +0100)]
media: i2c: imx290: Initialize runtime PM before subdev
Initializing the subdev before runtime PM means that no subdev
initialization can interact with the runtime PM framework. This can be
problematic when modifying controls, as the .s_ctrl() handler commonly
calls pm_runtime_get_if_in_use(). These code paths are not trivial,
making the driver fragile and possibly causing subtle bugs.
To make the subdev initialization more robust, initialize runtime PM
first.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:50 +0000 (15:44 +0100)]
media: i2c: imx290: Use runtime PM autosuspend
Use runtime PM autosuspend to avoid powering off the sensor during fast
stop-reconfigure-restart cycles. This also fixes runtime PM handling in
the probe function that didn't suspend the device, effectively leaving
it resumed forever.
While at it, improve documentation of power management in probe() and
remove().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 17 Oct 2022 10:44:27 +0000 (12:44 +0200)]
media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt
The imx290_pixfmt structure contains information about formats,
currently limited to the bpp value. Extend it with the register settings
for each format, and rename it to imx290_format_info to make its purpose
clearer. Add a function named imx290_format_info() to look up format
info for a media bus code, and use it through the code. This allows
dropping the imx290 bpp field as the value is now looked up dynamically.
The error handling in imx290_setup_format() can also be dropped, as the
format is guaranteed by imx290_set_fmt() to be valid.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 17 Oct 2022 10:44:27 +0000 (12:44 +0200)]
media: i2c: imx290: Use V4L2 subdev active state
Use the V4L2 subdev active state API to store the active format. This
simplifies the driver not only by dropping the imx290 current_format
field, but it also allows dropping the imx290 lock, replaced with the
state lock.
The lock check in imx290_ctrl_update() can be dropped as
imx290_set_fmt() can't be called anywmore with which set to ACTIVE
before controls are initialized.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:44 +0000 (15:44 +0100)]
media: i2c: imx290: Factor out black level setting to a function
The black level programmed in the BLKLEVEL register depends on the
output format. The black level value computation is currently performed
in imx290_set_ctrl(), in addition to having different black level values
in the output-specific register value tables. Move it to a separate
function to simplify the imx290_set_ctrl() code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:43 +0000 (15:44 +0100)]
media: i2c: imx290: Compute pixel rate and blanking in one place
The hblank, vblank, pixel rate and link frequency values and limits are
currently computed when creating controls, in imx290_ctrl_init(), and
updated in imx290_ctrl_update(). This duplicates the logic in different
places. Simplify the code by setting the control values and limits to
hardcoded values when creating the controls, and call
imx290_ctrl_update() to then update them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:42 +0000 (15:44 +0100)]
media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate()
Avoid accessing the imx290 current_format and current_mode fields in
imx290_calc_pixel_rate() to prepare for the removal of those fields.
Among the two callers of the function, imx290_ctrl_update() has an
explicit mode pointer already, and we can also give it a format pointer.
Use those explicitly.
While at it, inline the imx290_get_link_freq() function in
imx290_calc_pixel_rate() as it is only called there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx290_get_link_freq_index() function hides the fact that it relies
on the imx290 current_mode field, which obfuscates the code instead of
making it more readable. Inline it in the callers, and use the mode
pointer we already have in imx290_ctrl_update() instead of using the
current_mode field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:39 +0000 (15:44 +0100)]
media: i2c: imx290: Factor out subdev init and cleanup to functions
The probe() function is large. Make it more readable by factoring the
subdev initialization code out. While at it, rename the error labels as
the "free_" prefix isn't accurate.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 16 Jan 2023 14:44:38 +0000 (15:44 +0100)]
media: i2c: imx290: Group functions in sections
Move functions around to group them in logical sections, in order to
improve readability. As a result, the IMX290_NUM_SUPPLIES macro has to
be changed. No other code change is included, only moves.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Guoniu.zhou [Mon, 12 Dec 2022 04:05:26 +0000 (05:05 +0100)]
media: ov5640: set correct default format for CSI-2 mode
In commit a89f14bbcfa5 ("media: ov5640: Split DVP and CSI-2 formats"),
it splits format list for DVP and CSI-2 mode, but the default format
defined in commit 90b0f355c5a3 ("media: ov5640: Implement init_cfg")
is only supported by DVP mode, so define a new default format for
CSI-2 mode.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adam Ford [Tue, 20 Dec 2022 12:07:54 +0000 (13:07 +0100)]
media: i2c: imx219: Support four-lane operation
The imx219 camera is capable of either two-lane or four-lane
operation. When operating in four-lane, both the pixel rate and
link frequency change. Regardless of the mode, however, both
frequencies remain fixed.
Helper functions are needed to read and set pixel and link frequencies
which also reduces the number of fixed registers in the table of modes.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adam Ford [Tue, 20 Dec 2022 12:07:53 +0000 (13:07 +0100)]
media: i2c: imx219: Split common registers from mode tables
There are four modes, and each mode has a table of registers.
Some of the registers are common to all modes, so create new
tables for these common registers to reduce duplicate code.
Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marco Felsch [Fri, 16 Dec 2022 10:35:45 +0000 (11:35 +0100)]
media: i2c: tc358746: fix possible endianness issue
Using the u64 v4l2_dbg_register.val directly can lead to unexpected
results depending on machine endianness. Fix this by using a local
variable which is assigned afterwards. Since tc358746_read() will init
the val variable to 0 we can assing it without checking the return value
first.
Marco Felsch [Fri, 16 Dec 2022 10:35:44 +0000 (11:35 +0100)]
media: i2c: tc358746: fix ignoring read error in g_register callback
Currently we ignore the return value of tc358746_read() and return
alawys return 0 which is wrong. Fix this by returning the actual return
value of the read operation which is either 0 on success or an error
value.
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: bf27502b1f3b ("media: ov5675: Add support for OV5675 sensor") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ov2740_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the
created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which
causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl.
Hans Verkuil [Tue, 10 Jan 2023 12:45:33 +0000 (13:45 +0100)]
media: tm6000: remove deprecated driver
The tm6000 driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vpfe_capture drivers do not use the vb2 framework for streaming
video, instead they use the old vb1 framework and nobody stepped in to
convert these drivers to vb2.
The hardware is very old, so the decision was made to remove them
altogether since we want to get rid of the old vb1 framework.
Hans Verkuil [Tue, 10 Jan 2023 09:49:14 +0000 (10:49 +0100)]
media: zr364xx: remove deprecated driver
The zr364xx driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 10 Jan 2023 09:45:21 +0000 (10:45 +0100)]
media: stkwebcam: remove deprecated driver
The stkwebcam driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 10 Jan 2023 09:39:53 +0000 (10:39 +0100)]
media: fsl-viu: remove deprecated driver
The fsl-viu driver does not use the vb2 framework for streaming
video, instead it uses the old vb1 framework and nobody stepped in to
convert this driver to vb2.
The hardware is very old, so the decision was made to remove it
altogether since we want to get rid of the old vb1 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 10 Jan 2023 09:33:52 +0000 (10:33 +0100)]
media: cpia2: remove deprecated driver
The cpia2 driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 10 Jan 2023 09:26:19 +0000 (10:26 +0100)]
media: meye: remove this deprecated driver
The meye driver does not use the vb2 framework for streaming
video, instead it implements this in the driver. This is error prone,
and nobody stepped in to convert this driver to that framework.
The hardware is very old, so the decision was made to remove it
altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
projects / users / willy / linux.git / log