Roland Hii [Mon, 11 Jan 2016 07:34:18 +0000 (15:34 +0800)]
igb: add conditions for I210 to generate periodic clock output
In general case the maximum supported half cycle time of the synchronized
output clock is 70msec. Slower half cycle time than 70msec can be
programmed also as long as the output clock is synchronized to whole
seconds, useful specifically for generating a 1Hz clock.
Permitted values for the clock half cycle time are: 125,000,000 decimal,
250,000,000 decimal and 500,000,000 decimal (equals to 125msec, 250msec
and 500msec respectively).
Before this patch, only the half cycle time of less than or equal to 70msec
uses the I210 clock output function. This patch adds additional conditions
when half cycle time is equal to 125msec or 250msec or 500msec to use
clock output function.
Under other conditions, interrupt driven target time output events method
is still used to generate the desired clock output.
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 569f3b3d4e9898ae30788fde128e3277d996710e)
Julia Lawall [Sun, 3 Jan 2016 06:44:56 +0000 (07:44 +0100)]
igb: constify e1000_phy_operations structure
This e1000_phy_operations structure is never modified, so declare it as
const. Other structures of this type are already const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 5b70e4a12a525b5f3d4a3e3f0567ed877195b187)
Takuma Ueba [Thu, 31 Dec 2015 05:58:14 +0000 (14:58 +0900)]
igb: When GbE link up, wait for Remote receiver status condition
I210 device IPv6 autoconf test sometimes fails,
because DAD NS for link-local is not transmitted.
This packet is silently dropped.
This problem is seen only GbE environment.
igb_watchdog_task link up detection continues to the following process.
The following cases are observed:
1.PHY 1000BASE-T Status Register Remote receiver status bit is NG.
(NG status becomes OK after about 200 - 700ms)
2.In this case, the transfer packet is silently dropped.
1000BASE-T Status register
[Expected]: 0x3800 or 0x7800
[problem occurred]: 0x2800 or 0x6800
Frequency of occurrence: approx 1/10 - 1/40 observed
In order to avoid this problem,
wait until 1000BASE-T Status register "Remote receiver status OK"
After applying this patch, at least 400 runs succeed with no problems.
Signed-off-by: Takuma Ueba <t.ueba11@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit b72f3f72005dfd649d787535bd04ada3b3f1b3ba)
Alexander Duyck [Thu, 7 Jan 2016 07:11:43 +0000 (23:11 -0800)]
igb: Add workaround for VLAN tag stripping on 82576
There was a workaround partially implemented for the 82576 that is needed
in order for VLAN tag stripping to function correctly. The original code
had side effects that would make it so the workaround was active on all
MACs. I have updated the code so that the workaround is enabled, but
limited to the 82576, or activated if we exceed the available unicast
addresses.
The workaround has a side effect of mirroring all of the traffic outgoing
from the VFs back to the PF. As such it is not recommended to use the
82576 in promiscuous mode as it will take a performance hit, though this is
now consistent with the performance as seen on the out-of-tree igb driver.
I also limited the scope of the UTA bits all being set to only when the
VMOLR register is enabled. This should limit the effects of the UTA
register so that we don't pick up any excess traffic unless promiscuous
mode has been enabled on the PF, whereas before the PF would have ended up
in something equivalent to unicast promiscuous mode with VLAN filtering
otherwise.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit bf456abb9b82d5376e7189cca00b528dd86d1559)
Alexander Duyck [Thu, 7 Jan 2016 07:11:34 +0000 (23:11 -0800)]
igb: Enable use of "bridge fdb add" to set unicast table entries
This change makes it so that we can use the bridge utility to add a FDB
entry for the PF to an igb port. By doing this we can enable the VFs to
talk to virtual ports residing on top of the PF.
In addition this should also address issues with MACVLANs trying to reside
on top of the PF as well as they would have had similar issues when added
to the PF with SR-IOV enabled.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 268f9d33a9319bb2d4d999e264aef9c00081bba0)
Alexander Duyck [Thu, 7 Jan 2016 07:11:26 +0000 (23:11 -0800)]
igb: Drop unnecessary checks in transmit path
This patch drops several checks that we dropped from ixgbe some ago. It
should not be possible for us to be called with either of the conditional
statements returning true so we can just drop them from the hot-path.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 9c2f186e45faa34d5f6ff52aa84c361d4be72288)
Alexander Duyck [Thu, 7 Jan 2016 07:11:18 +0000 (23:11 -0800)]
igb: Add support for VLAN promiscuous with SR-IOV and NTUPLE
This change fixes things so that we can fully support SR-IOV or the
recently added NTUPLE filtering while allowing support for VLAN promiscuous
mode. By making this change we are able to support possible scenarios such
as SR-IOV with the PF connected to a Linux bridge hosting other VMs.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 16903caa339961b9f8a68b64f4f313789de48599)
Alexander Duyck [Thu, 7 Jan 2016 07:11:11 +0000 (23:11 -0800)]
igb: Clean-up configuration of VF port VLANs
This patch is meant to clean-up the configuration of the VF port based VLAN
configuration. The original logic was a bit muddled and had some
undesirable side effects such as VLANs being either completely stripped
from the port or VLANs being left when they shouldn't be. The idea behind
this code is to avoid any events such as spurious spoof notifications when
we are removing one VLAN tag and replacing it with another.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit a15d92598a5a741037b873fd4a43595a63048bbd)
Alexander Duyck [Thu, 7 Jan 2016 07:11:04 +0000 (23:11 -0800)]
igb: Merge VLVF configuration into igb_vfta_set
This change makes it so that we can merge the configuration of the VLVF
registers into the setting of the VFTA register. By doing this we simplify
the logic and make use of similar functionality that we have already added
for ixgbe making it easier to maintain both drivers.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 8b77c6b20f32511175dfd00322ae82fb31949d55)
Alexander Duyck [Thu, 7 Jan 2016 07:10:54 +0000 (23:10 -0800)]
igb: Always enable VLAN 0 even if 8021q is not loaded
This patch makes it so that we always add VLAN 0. This is important as we
need to guarantee the PF can receive untagged frames in the case of SR-IOV
being enabled but VLAN filtering not being enabled in the kernel.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 5982a5565a08abf3b9ff18941b3e3cc94f7c8286)
Alexander Duyck [Thu, 7 Jan 2016 07:10:47 +0000 (23:10 -0800)]
igb: Do not factor VLANs into RLPML calculation
The RLPML registers already take the size of VLAN headers into account when
determining the maximum packet length. This is called out in EAS documents
for several parts including the 82576 and the i350. As such we can drop
the addition of size to the value programmed into the RLPML registers.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit d3836f8e2517fb04328c673989fd780030926694)
Alexander Duyck [Thu, 7 Jan 2016 07:10:39 +0000 (23:10 -0800)]
igb: Allow asymmetric configuration of MTU versus Rx frame size
Since the igb driver is using page based receive there is no point in
limiting the Rx capabilities of the device. The driver can receive 9K
jumbo frames at all times. The only changes needed due to MTU changes are
updates for the FIFO sizes and flow-control watermarks.
Update the maximum frame size to reflect the 9.5K limitation of the
hardware, and replace all instances of max_frame_size with
MAX_JUMBO_FRAME_SIZE when referring to an Rx FIFO or frame.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 45693bcb00cbd379c373ab22ccd9a9d4755cc7ed)
Alexander Duyck [Thu, 7 Jan 2016 07:10:30 +0000 (23:10 -0800)]
igb: Refactor VFTA configuration
This patch starts the clean-up process on the VFTA configuration.
Specifically in this patch I attempt to address and simplify several items
while also updating the code to bring it more inline with what is already
in ixgbe.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 832e821c51e381966464c8a0f30f12eb1514eba0)
Alexander Duyck [Thu, 7 Jan 2016 07:10:23 +0000 (23:10 -0800)]
igb: clean up code for setting MAC address
Drop a bunch of hand written byte swapping code in favor of just doing the
byte swapping ourselves. The registers are little endian registers storing
a big endian value so if we read the MAC address array as little endian
then we will get the CPU registers into the proper layout.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit c3278587e7d34cfbc1d38d3ae25923343af7752a)
Mitch Williams [Sat, 12 Dec 2015 00:45:38 +0000 (16:45 -0800)]
igb/igbvf: don't give up
The driver shouldn't just give up if it fails to get the hardware
mailbox lock. This can happen in a situation where the PF-VF
communication channel is heavily loaded and causes complete
communications failure between the PF and VF drivers.
Add a counter and a delay. The driver will now retry ten times, waiting
one millisecond between retries.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 9ce0e8d72678b5b60c99ce4c7af15ec127c761cb)
Shota Suzuki [Fri, 11 Dec 2015 09:44:00 +0000 (18:44 +0900)]
igb: Unpair the queues when changing the number of queues
By the commit 72ddef0506da ("igb: Fix oops caused by missing queue
pairing"), the IGB_FLAG_QUEUE_PAIRS flag can now be set when changing the
number of queues by "ethtool -L", but it is never cleared unless the igb
driver is reloaded.
This patch clears it if queue pairing becomes unnecessary as a result of
"ethtool -L".
Signed-off-by: Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 37a5d163fb447b39f7960d0534de30e88ad395bb)
Shota Suzuki [Fri, 11 Dec 2015 09:43:59 +0000 (18:43 +0900)]
igb: Remove unnecessary flag setting in igb_set_flag_queue_pairs()
If VFs are enabled (max_vfs >= 1), both max_rss_queues and
adapter->rss_queues are set to 2 in the case of e1000_82576.
In this case, IGB_FLAG_QUEUE_PAIRS is always set in the default block as a
result of fall-through, thus setting it in the e1000_82576 block is not
necessary.
Signed-off-by: Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit ceb27759987ec10ba22332bd7fdf1cfb35b86991)
Joe Schultz [Tue, 3 Nov 2015 18:37:29 +0000 (12:37 -0600)]
igb: Explicitly label self-test result indices
Previously, the ethtool self-test gstrings/data arrays were accessed via
hardcoded indices, which made the code difficult to follow. This patch
replaces the hardcoded values with enum-based labels.
Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit d602de05934c1d3022b153ff879e81f65df2a7b6)
Joe Schultz [Tue, 3 Nov 2015 18:37:24 +0000 (12:37 -0600)]
igb: Improve cable length function for I210, etc.
Previously, the PHY-specific code to get the cable length for the
I210 internal and related PHYs was reporting the cable length of a
single pair and reporting it as the min, max, and total cable length.
Update it so that all four pairs are checked so the true min, max,
and average cable lengths are reported.
Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 3627f8f1d137f6487e51ff1199a54a087a2a6446)
Aaron Sierra [Tue, 3 Nov 2015 18:37:18 +0000 (12:37 -0600)]
igb: Don't add PHY address to PCDL address
There is no reason to add the PHY address into the PCDL register address.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 06b0dd64923b5598a52de4c889a116c49493bf97)
Aaron Sierra [Tue, 3 Nov 2015 18:37:09 +0000 (12:37 -0600)]
igb: Remove GS40G specific defines/functions
The I210 internal PHY can be accessed just as well with the access
functions shared by 82580, I350, and I354 devices. A side effect of
relying on the common functions, is that I210 cable length support
is folded back into the common case which effectively reverts the
following commit:
Jarod Wilson [Mon, 19 Oct 2015 15:52:04 +0000 (11:52 -0400)]
igb: improve handling of disconnected adapters
Clean up array_rd32 so that it uses igb_rd32 the same as rd32, per the
suggestion of Alexander Duyck, and use io_addr in more places, so that
we don't have the need to call E1000_REMOVED (which simply looks for a
null hw_addr) nearly as much.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 7b06a6909555ffb0140733cc4420222604140b27)
Jan Beulich [Mon, 19 Oct 2015 10:23:29 +0000 (04:23 -0600)]
igb: fix NULL derefs due to skipped SR-IOV enabling
The combined effect of commits 6423fc3416 ("igb: do not re-init SR-IOV
during probe") and ceee3450b3 ("igb: make sure SR-IOV init uses the
right number of queues") causes VFs no longer getting set up, leading
to NULL pointer dereferences due to the adapter's ->vf_data being NULL
while ->vfs_allocated_count is non-zero. The first commit not only
neglected the side effect of igb_sriov_reinit() that the second commit
tried to account for, but also that of setting IGB_FLAG_HAS_MSIX,
without which igb_enable_sriov() is effectively a no-op. Calling
igb_{,re}set_interrupt_capability() as done here seems to address this,
but I'm not sure whether this is better than sinply reverting the other
two commits.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit be06998f96ecb93938ad2cce46c4289bf7cf45bc)
The i210 has two EEPROM access registers that are located in
non-standard offsets: EEARBC and EEMNGCTL. EEARBC was fixed previously
and EEMNGCTL should also be corrected.
Reported-by: Roman Hodek <roman.aud@siemens.com> Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 08c991297582114a6e1220f913eec91789c4eac6)
Upon looking at the igb driver, I see that igb_rd32() attempted to read from
hw_addr and failed, so it set hw->hw_addr to NULL and spit out the message
in the log output above, "PCIe link lost, device now detached".
Well, now that hw_addr is NULL, the attempt to call pci_iounmap is obviously
not going to go well. As suggested by Mark Rustad, do something similar to
what ixgbe does, and save a copy of hw_addr as adapter->io_addr, so we can
still call pci_iounmap on it on teardown. Additionally, for consistency,
make the pci_iomap call assignment directly to io_addr, so map and unmap
match.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 73bf8048d7c86a20a59d427e55deb1a778e94df7)
We want to deprecate the use of 'struct timespec' on 32-bit
architectures, as it is will overflow in 2038. The igb
driver uses it to read the current time, and can simply
be changed to use ktime_get_real_ts64() instead.
Because of hardware limitations, there is still an overflow
in year 2106, which we cannot really avoid, but this documents
the overflow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 40c9b0796d46523fffb93e46ed8c691456146743)
Stefan Assmann [Thu, 17 Sep 2015 12:46:10 +0000 (14:46 +0200)]
igb: assume MSI-X interrupts during initialization
In igb_sw_init() the sequence of calls was changed from
igb_init_queue_configuration()
igb_init_interrupt_scheme()
igb_probe_vfs()
to
igb_probe_vfs()
igb_init_queue_configuration()
igb_init_interrupt_scheme()
This results in adapter->flags not having the IGB_FLAG_HAS_MSIX bit set
during igb_probe_vfs()->igb_enable_sriov(). Therefore SR-IOV does not
get enabled properly and we run into a NULL pointer if the max_vfs
module parameter is specified (adapter->vf_data does not get allocated,
crash on accessing the structure).
Prevent this by setting the IGB_FLAG_HAS_MSIX bit before calling
igb_probe_vfs(). The real interrupt capabilities will be checked during
igb_init_interrupt_scheme() so this is safe to do.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit cbfe360a1541a32e9e28f8f8ac925d2b7979d767)
Toshiaki Makita [Thu, 6 Aug 2015 08:57:28 +0000 (17:57 +0900)]
igbvf: Enable TSO for stacked VLAN
Setting ndo_features_check to passthru_features_check allows the driver
to skip the check for multiple tagged TSO packets and enables stacked
VLAN TSO.
Tested with I350.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 213246d3fade6772e07138597bca0bdf9fbe754d)
Todd Fujinaka [Sat, 8 Aug 2015 00:27:39 +0000 (17:27 -0700)]
igb: make sure SR-IOV init uses the right number of queues
Recent changes to igb_probe_vfs() could lead to the PF holding onto all
of the queues. Reorder igb_probe_vfs() to be before
gb_init_queue_configuration() and add some more error checking.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit ceee3450b3a85db05a107d54fbea031c77d30401)
Stefan Assmann [Thu, 6 Aug 2015 07:32:17 +0000 (09:32 +0200)]
igbvf: clear buffer_info->dma after dma_unmap_single()
The driver doesn't clear buffer_info->dma after calling
dma_unmap_single() in all cases. This has been discovered by changing
the mtu twice, which caused the following backtrace.
Jia-Ju Bai [Wed, 5 Aug 2015 14:05:16 +0000 (22:05 +0800)]
igb: Fix a memory leak in igb_probe
In error handling code of igb_probe, the memory adapter->shadow_vfta
allocated by kcalloc in igb_sw_init is not freed. So when register_netdev
or igb_init_i2c is failed, a memory leak will occur.
This patch adds kfree to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 42ad1a03b4caf4d95b980bce17c46242e6728ddc)
Jia-Ju Bai [Mon, 3 Aug 2015 03:36:26 +0000 (11:36 +0800)]
igb: Fix a deadlock in igb_sriov_reinit
When igb_init_interrupt_scheme in igb_sriov_reinit is failed, the lock
acquired by rtnl_lock() is not released, which causes a deadlock.
This patch adds rtnl_unlock() in error handling to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 3eb14ea8d9584e96680729c2c7a9129bafa13a39)
Alex Williamson [Wed, 29 Jul 2015 20:38:15 +0000 (14:38 -0600)]
igb: Teardown SR-IOV before unregister_netdev()
When the .remove() callback for a PF is called, SR-IOV support for the
device is disabled, which requires unbinding and removing the VFs.
The VFs may be in-use either by the host kernel or userspace, such as
assigned to a VM through vfio-pci. In this latter case, the VFs may
be removed either by shutting down the VM or hot-unplugging the
devices from the VM. Unfortunately in the case of a Windows 2012 R2
guest, hot-unplug is broken due to the ordering of the PF driver
teardown. Disabling SR-IOV prior to unregister_netdev() avoids this
issue.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit c23d92b80e0b44d4c17085f0413e7574a7583615)
Richard Cochran [Thu, 23 Jul 2015 21:59:30 +0000 (14:59 -0700)]
igb: implement high frequency periodic output signals
In addition to interrupt driven target time output events, the i210
also has two programmable clock outputs. These clocks support periods
between 16 nanoseconds and 140 milliseconds. This patch implements
the periodic output function using the clock outputs when possible,
falling back to the target time for longer periods.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 30c72916d71b7970b16dca2bb1234aef2d37b695)
Konstantin Khlebnikov [Fri, 19 May 2017 07:18:49 +0000 (10:18 +0300)]
e1000e: use disable_hardirq() also for MSIX vectors in e1000_netpoll()
Replace disable_irq() which waits for threaded irq handlers with
disable_hardirq() which waits only for hardirq part.
Fixes: 311191297125 ("e1000: use disable_hardirq() for e1000_netpoll()") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit fd8e597ba4afb769a8fb642555a6e0c5349a6ae8) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Benjamin Poirier [Wed, 17 May 2017 20:24:13 +0000 (16:24 -0400)]
e1000e: Don't return uninitialized stats
Some statistics passed to ethtool are garbage because e1000e_get_stats64()
doesn't write them, for example: tx_heartbeat_errors. This leaks kernel
memory to userspace and confuses users.
Do like ixgbe and use dev_get_stats() which first zeroes out
rtnl_link_stats64.
Fixes: 5944701df90d ("net: remove useless memset's in drivers get_stats64") Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 24ad2a9209a0bf1ec37fac25a011c98551865abb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jacob Keller [Wed, 3 May 2017 17:28:50 +0000 (10:28 -0700)]
e1000e: fix race condition around skb_tstamp_tx()
The e1000e driver and related hardware has a limitation on Tx PTP
packets which requires we limit to timestamping a single packet at once.
We do this by verifying that we never request a new Tx timestamp while
we still have a tx_hwtstamp_skb pointer.
Unfortunately the driver suffers from a race condition around this. The
tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx()
is called. This function notifies the stack and applications of a new
timestamp. Even a well behaved application that only sends a new request
when the first one is finished might be woken up and possibly send
a packet before we can free the timestamp in the driver again. The
result is that we needlessly ignore some Tx timestamp requests in this
corner case.
Fix this by assigning the tx_hwtstamp_skb pointer prior to calling
skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb
until that function finishes. This ensures that the application is not
woken up until the driver is ready to begin timestamping a new packet.
This ensures that well behaved applications do not accidentally race
with condition to skip Tx timestamps. Obviously an application which
sends multiple Tx timestamp requests at once will still only timestamp
one packet at a time. Unfortunately there is nothing we can do about
this.
Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 5012863b7347866764c4a4e58b62fb05346b0d06) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Add support for 38.4MHz frequency is required for PTP
on CannonLake. SYSTIM frequency adjustment attributes for TIMINCA are
get/set dependent on the hardware clock frequency for a different
types of adapters. 38.4MHz frequency supported by CannonLake
and active once time synchronisation mechanism was enabled
Changed abbreviation from Hz to HZ to be compliant checkpatch code style
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 68fe1d5da548aab2b6b1c28a9137248d6ccfcc43) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
i219 (6) and i219 (7) are the next LOM generations that will be
available on the nextIntel Client platform (CannonLake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 3a3173b9c37aa1f07f8a71021114ee29a5712acb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jarod Wilson [Tue, 26 Jul 2016 18:25:35 +0000 (14:25 -0400)]
e1000e: fix PTP on e1000_pch_lpt variants
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed, so set the
appropriate flag2 in e1000_pch_lpt_info too.
Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 10ed1e0bd144b5c3a92ca0c8fd06eb80b80649e5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Bernd Faust [Thu, 16 Feb 2017 18:42:07 +0000 (19:42 +0100)]
e1000e: fix timing for 82579 Gigabit Ethernet controller
After an upgrade to Linux kernel v4.x the hardware timestamps of the
82579 Gigabit Ethernet Controller are different than expected.
The values that are being read are almost four times as big as before
the kernel upgrade.
The difference is that after the upgrade the driver sets the clock
frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel
confirmed that the correct frequency for this network adapter is 96MHz.
Signed-off-by: Bernd Faust <berndfaust@gmail.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 5313eeccd2d7f486be4e5c7560e3e2be239ec8f7) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
After additional regression testing, several users are experiencing
kernel panics during shutdown on e1000e devices. Reverting this
change resolves the issue.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 26243014
(cherry picked from commit 9f47a48e6eb97d793db85373e3ef4c55d876d334) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
khalidm [Mon, 17 Oct 2016 16:51:08 +0000 (09:51 -0700)]
e1000e: driver trying to free already-free irq
During systemd reboot sequence network driver interface is shutdown
by e1000_close. The PCI driver interface is shut by e1000_shutdown.
The e1000_shutdown checks for netif_running status, if still up it
brings down driver. But it disables msi outside of this if statement,
regardless of netif status. All this is OK when e1000_close happens
after shutdown. However, by default, everything in systemd is done
in parallel. This creates a conditions where e1000_shutdown is called
after e1000_close, therefore hitting BUG_ON assert in free_msi_irqs.
CC: xe-kernel@external.cisco.com Signed-off-by: khalidm <khalidm@cisco.com> Signed-off-by: David Singleton <davsingl@cisco.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 7e54d9d063fa239c95c21548c5267f0ef419ff56) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
WANG Cong [Sat, 10 Dec 2016 22:22:42 +0000 (14:22 -0800)]
e1000: use disable_hardirq() for e1000_netpoll()
In commit 02cea3958664 ("genirq: Provide disable_hardirq()")
Peter introduced disable_hardirq() for netpoll, but it is forgotten
to use it for e1000.
This patch changes disable_irq() to disable_hardirq() for e1000.
Reported-by: Dave Jones <davej@codemonkey.org.uk> Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 26243014
(cherry picked from commit 311191297125156319be8f86d546ea1c569f7e95) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jarod Wilson [Tue, 26 Jul 2016 18:25:35 +0000 (14:25 -0400)]
e1000e: fix PTP on e1000_pch_lpt variants
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed, so set the
appropriate flag2 in e1000_pch_lpt_info too.
Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 8037dd60f45264c3fbbea4cc0cea5f2f0a774b5e) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jarod Wilson [Tue, 26 Jul 2016 18:25:34 +0000 (14:25 -0400)]
e1000e: factor out systim sanitization
This is prepatory work for an expanding list of adapter families that have
occasional ~10 hour clock jumps when being used for PTP. Factor out the
sanitization function and convert to using a feature (bug) flag, per
suggestion from Jesse Brandeburg.
Littering functional code with device-specific checks is much messier than
simply checking a flag, and having device-specific init set flags as needed.
There are probably a number of other cases in the e1000e code that
could/should be converted similarly.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 0be5b96cd8400aeb4bf3f8c5e7f5efaa38ae5055) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jarod Wilson [Thu, 9 Jun 2016 23:50:13 +0000 (19:50 -0400)]
e1000e: keep Rx/Tx HW_VLAN_CTAG in sync
The bit in the e1000 driver that mentions explicitly that the hardware
has no support for separate RX/TX VLAN accel toggling rings true for
e1000e as well, and thus both NETIF_F_HW_VLAN_CTAG_RX and
NETIF_F_HW_VLAN_CTAG_TX need to be kept in sync.
Revert a portion of commit 889ad456660461 ("e1000e: keep VLAN interfaces
functional after rxvlan off") since keeping the bits in sync resolves
the original issue.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 838086414b3cda5c592591f2b82256996306dab6) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jarod Wilson [Wed, 29 Jun 2016 03:41:31 +0000 (20:41 -0700)]
e1000e: keep VLAN interfaces functional after rxvlan off
I've got a bug report about an e1000e interface, where a VLAN interface is
set up on top of it:
$ ip link add link ens1f0 name ens1f0.99 type vlan id 99
$ ip link set ens1f0 up
$ ip link set ens1f0.99 up
$ ip addr add 192.168.99.92 dev ens1f0.99
At this point, I can ping another host on vlan 99, ip 192.168.99.91.
However, if I do the following:
$ ethtool -K ens1f0 rxvlan off
Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on
again. I'm not sure if this is actually intended behavior, or if there's a
lack of software VLAN stripping fallback, or what, but things continue to
work if I simply don't call e1000e_vlan_strip_disable() if there are
active VLANs (plagiarizing a function from the e1000 driver here) on the
interface.
Also slipped a related-ish fix to the kerneldoc text for
e1000e_vlan_strip_disable here...
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 26243014
(cherry picked from commit 889ad4566604610804df984e1a3dd5e2c66256e5) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jacob Keller [Wed, 20 Apr 2016 18:36:42 +0000 (11:36 -0700)]
e1000e: don't modify SYSTIM registers during SIOCSHWTSTAMP ioctl
The e1000e_config_hwtstamp function was incorrectly resetting the SYSTIM
registers every time the ioctl was being run. If you happened to be
running ptp4l and lost the PTP connect (removing cable, or blocking the
UDP traffic for example), then ptp4l will eventually perform a restart
which involves re-requesting timestamp settings. In e1000e this has the
unfortunate and incorrect result of resetting SYSTIME to the kernel
time. Since kernel time is usually in UTC, and PTP time is in TAI, this
results in the leap second being re-applied.
Fix this by extracting the SYSTIME reset out into its own function,
e1000e_ptp_reset, which we call during reset to restore the hardware
registers. This function will (a) restart the timecounter based on the
new system time, (b) restore the previous PPB setting, and (c) restore
the previous hwtstamp settings.
In order to perform (b), I had to modify the adjfreq ptp function
pointer to store the old delta each time it is called. This also has the
side effect of restoring the correct base timinca register correctly.
The driver does not need to explicitly zero the ptp_delta variable since
the entire adapter structure comes zero-initialized.
Reported-by: Brian Walsh <brian@walsh.ws> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Brian Walsh <brian@walsh.ws> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit aa524b66c5efd1d3220b74168d803e8b2ee1d212) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jacob Keller [Wed, 13 Apr 2016 23:08:33 +0000 (16:08 -0700)]
e1000e: mark shifted values as unsigned
The E1000_ICH_NVM_SIG_MASK value is shifted, out to the 31st bit, which
is the signed bit for signed constants. Mark these values as unsigned to
prevent compiler warnings and issues on platforms which a different
signed bit implementation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 942c711206d1e0cd3dffc591829cbcbb9bcc0b1b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jacob Keller [Wed, 13 Apr 2016 23:08:32 +0000 (16:08 -0700)]
e1000e: use BIT() macro for bit defines
This prevents signed bitshift issues when the shift would overwrite the
signed bit, and prevents making this mistake in the future when copying
and modifying code.
Use GENMASK or the unsigned postfix for cases which aren't suitable for
BIT() macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 18dd23920703891c39c7965873f8ae369bd3a237) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
e1000e: e1000e_cyclecounter_read(): do overflow check only if needed
SYSTIMH:SYSTIML registers are incremented by 24-bit value TIMINCA[23..0]
er32(SYSTIML) are probably moderately expensive (they are pci bus reads).
Can we avoid one of them? Yes, we can.
If the SYSTIML value we see is smaller than 0xff000000, the overflow
into SYSTIMH would require at least two increments.
We do two reads, er32(SYSTIML) and er32(SYSTIMH), in this order.
Even if one increment happens between them, the overflow into SYSTIMH
is impossible, and we can avoid doing another er32(SYSTIML) read
and overflow check.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit ab507c9a54ce3580e6a3829c9f4c24a13c32cbac) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
If two consecutive reads of the counter are the same, it is also
not an overflow. "systimel_1 < systimel_2" should be
"systimel_1 <= systimel_2".
Before the patch, we could perform an *erroneous* correction:
Let's say that systimel_1 == systimel_2 == 0xffffffff.
"systimel_1 < systimel_2" is false, we think it's an overflow,
we read "systimeh = er32(SYSTIMH)" which meanwhile had incremented,
and use "(systimeh << 32) + systimel_2" value which is 2^32 too large.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: intel-wired-lan@lists.osuosl.org Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit a07fd74d5ea9c45a5c6e41f7cb4b997cf40d50f3) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Steve Shih [Tue, 5 Apr 2016 18:30:03 +0000 (11:30 -0700)]
e1000e: fix ethtool autoneg off for non-copper
This patch fixes the issues for disabling auto-negotiation and forcing
speed and duplex settings for the non-copper media.
For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for
eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
call would not fail with -EOPNOTSUPP.
e1000_set_spd_dplx should not automatically turn autoneg back on for forced
1000 Mbps full duplex settings for non-copper media.
Cc: xe-kernel@external.cisco.com Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Steve Shih <sshih@cisco.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit e11f303e3d0731a7379252192e7d02a1ae319238) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Stefan Assmann [Wed, 3 Feb 2016 08:20:51 +0000 (09:20 +0100)]
e1000: call ndo_stop() instead of dev_close() when running offline selftest
Calling dev_close() causes IFF_UP to be cleared which will remove the
interfaces routes and some addresses. That's probably not what the user
intended when running the offline selftest. Besides this does not happen
if the interface is brought down before the test, so the current
behaviour is inconsistent.
Instead call the net_device_ops ndo_stop function directly and avoid
touching IFF_UP at all.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 1f2f83f838489d386ecad9d0c77c3d6ec983102c) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Stefan Assmann [Wed, 3 Feb 2016 08:20:52 +0000 (09:20 +0100)]
e1000e: call ndo_stop() instead of dev_close() when running offline selftest
Calling dev_close() causes IFF_UP to be cleared which will remove the
interfaces routes and some addresses. That's probably not what the user
intended when running the offline selftest. Besides this does not happen
if the interface is brought down before the test, so the current
behaviour is inconsistent.
Instead call the net_device_ops ndo_stop function directly and avoid
touching IFF_UP at all.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit d5ea45da1f04a3443710306e16db3b3aeae92918) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Alexander Duyck [Wed, 2 Mar 2016 21:16:08 +0000 (16:16 -0500)]
e1000: Double Tx descriptors needed check for 82544
The 82544 has code that adds one additional descriptor per data buffer.
However we weren't taking that into account when determining the descriptors
needed for the next transmit at the end of the xmit_frame path.
This change takes that into account by doubling the number of descriptors
needed for the 82544 so that we can avoid a potential issue where we could
hang the Tx ring by loading frames with xmit_more enabled and then stopping
the ring without writing the tail.
In addition it adds a few more descriptors to account for some additional
workarounds that have been added over time.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit a4605fef7132f19afded76ee025c957558271a7d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Alexander Duyck [Wed, 2 Mar 2016 21:16:01 +0000 (16:16 -0500)]
e1000: Do not overestimate descriptor counts in Tx pre-check
The current code path is capable of grossly overestimating the number of
descriptors needed to transmit a new frame. This specifically occurs if
the skb contains a number of 4K pages. The issue is that the logic for
determining the descriptors needed is ((S) >> (X)) + 1. When X is 12 it
means that we were indicating that we required 2 descriptors for each 4K
page when we only needed one.
This change corrects this by instead adding (1 << (X)) - 1 to the S value
instead of adding 1 after the fact. This way we get an accurate descriptor
needed count as we are essentially doing a DIV_ROUNDUP().
Reported-by: Ivan Suzdal <isuzdal@mirantis.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 847a1d6796c767f8b697ead60997b847a84b897b) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Raanan Avargil [Tue, 22 Dec 2015 13:35:05 +0000 (15:35 +0200)]
e1000e: Initial support for KabeLake
i219 (4) and i219 (5) are the next LOM generations that will be
available on the next Intel platform (KabeLake).
This patch provides the initial support for the devices.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 9cd34b3a1cfd47692cbef8cb0761475021883e18) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Raanan Avargil [Tue, 22 Dec 2015 13:35:04 +0000 (15:35 +0200)]
e1000e: Clear ULP configuration register on ULP exit
There have been bugs caused by HW ULP configuration settings not being
properly cleared after cable connect in V-Pro capable systems.
This caused HW to get out of sync occasionally.
The fix ensures that ULP settings are cleared in HW after
LAN cable re-connect.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit c5c6d07761a9ff64f0ffff2ca410a578fb7c4579) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Raanan Avargil [Tue, 22 Dec 2015 13:35:03 +0000 (15:35 +0200)]
e1000e: Set HW FIFO minimum pointer gap for non-gig speeds
Based on feedback from HW team, the configured value of the internal PHY
HW FIFO pointer gap was incorrect for non-gig speeds.
This patch provides the correct configuration.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit c26f40daf4e32f970b8337a88b65a8d00332ae6f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Raanan Avargil [Tue, 22 Dec 2015 13:35:02 +0000 (15:35 +0200)]
e1000e: Increase PHY PLL clock gate timing
Several packet loss issues were reported for which the root cause for
them was an incorrect configuration of internal HW PHY clock gating
mechanism by SW.
This patch provides the correct mechanism.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 74f31299a41e729226d60426087592b6790f22b7) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Benjamin Poirier [Mon, 9 Nov 2015 23:50:21 +0000 (15:50 -0800)]
e1000e: Fix msi-x interrupt automask
Since the introduction of 82574 support in e1000e, the driver has worked
on the assumption that msi-x interrupt generation is automatically
disabled after each irq. As it turns out, this is not the case.
Currently, rx interrupts can fire multiple times before and during napi
processing. This can be a problem for users because frames that arrive
in a certain window (after adapter->clean_rx() but before
napi_complete_done() has cleared NAPI_STATE_SCHED) generate an interrupt
which does not lead to napi_schedule(). These frames sit in the rx queue
until another frame arrives (a tcp retransmit for example).
While the EIAC and CTRL_EXT registers are properly configured for irq
automask, the modification of IAM in e1000_configure_msix() is what
prevents automask from working as intended.
This patch removes that erroneous write and fixes interrupt rearming for
tx interrupts. It also clears IAME from CTRL_EXT. This is not strictly
necessary for operation of the driver but it is to avoid disruption from
potential programs that access the registers directly, like `ethregs -c`.
Reported-by: Frank Steiner <steiner-reg@bio.ifi.lmu.de> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 0a8047ac68e50e4ccbadcfc6b6b070805b976885) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Benjamin Poirier [Mon, 9 Nov 2015 23:50:20 +0000 (15:50 -0800)]
e1000e: Do not write lsc to ics in msi-x mode
In msi-x mode, there is no handler for the lsc interrupt so there is no
point in writing that to ics now that we always assume Other interrupts
are caused by lsc.
Reviewed-by: Jasna Hodzic <jhodzic@ucdavis.edu> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit a61cfe4ffad7864a07e0c74969ca7ceb77ab2f1f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Benjamin Poirier [Mon, 9 Nov 2015 23:50:19 +0000 (15:50 -0800)]
e1000e: Do not read ICR in Other interrupt
Removes the ICR read in the other interrupt handler, uses EIAC to
autoclear the Other bit from ICR and IMS. This allows us to avoid
interference with Rx and Tx interrupts in the Other interrupt handler.
The information read from ICR is not needed. IMS is configured such that
the only interrupt cause that can trigger the Other interrupt is Link
Status Change.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 16ecba59bc333d6282ee057fb02339f77a880beb) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Alexander Duyck [Tue, 27 Oct 2015 23:59:31 +0000 (16:59 -0700)]
e1000e: Switch e1000e_up to void, drop code checking for error result
The function e1000e_up always returns 0. As such we can convert it to a
void and just ignore the results. This allows us to drop some code in a
couple spots as we no longer need to worry about non-zero return values.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 386164d9b36b1f6f1396978110de85c7e186491d) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Raanan Avargil [Tue, 20 Oct 2015 14:13:01 +0000 (17:13 +0300)]
e1000e: initial support for i219-LM (3)
i219-LM (3) is a LOM that will be available on systems with the
Lewisburg Platform Controller Hub (PCH) chipset from Intel.
This patch provides the initial support for the device.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit f3ed935de059b83394c3ecf2c64c93b57c8915fe) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jean Sacren [Sat, 19 Sep 2015 11:08:40 +0000 (05:08 -0600)]
e1000: clean up the checking logic
The checking logic needed some clean-up work, so we rewrite it by
checking for break first. With that change in place, we can even move
the second check for goto statement outside of the loop.
As this is merely a cleanup, no functional change is involved. The
questionable 'tmp != 0xFF' is intentionally left alone.
Mark Rustad and Alexander Duyck contributed to this patch.
CC: Mark Rustad <mark.d.rustad@intel.com> CC: Alex Duyck <aduyck@mirantis.com> Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 4e01f3a802b5910b25814e1d0fd05907edffed6f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
e1000: fix data race between tx_ring->next_to_clean
e1000_clean_tx_irq cleans buffers and sets tx_ring->next_to_clean,
then e1000_xmit_frame reuses the cleaned buffers. But there are no
memory barriers when buffers gets recycled, so the recycled buffers
can be corrupted.
Use smp_store_release to update tx_ring->next_to_clean and
smp_load_acquire to read tx_ring->next_to_clean to properly
hand off buffers from e1000_clean_tx_irq to e1000_xmit_frame.
The data race was found with KernelThreadSanitizer (KTSAN).
Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 9eab46b7cb8d0b0dcf014bf7b25e0e72b9e4d929) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Toshiaki Makita [Thu, 6 Aug 2015 08:57:29 +0000 (17:57 +0900)]
e1000e: Enable TSO for stacked VLAN
Setting ndo_features_check to passthru_features_check allows the driver
to skip the check for multiple tagged TSO packets and enables stacked
VLAN TSO.
Tested with I217-LM.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit f2701b185e05d0897a47f6a14da40a068b0644ff) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Francois Romieu [Wed, 5 Aug 2015 22:52:37 +0000 (00:52 +0200)]
e1000: remove dead e1000_init_eeprom_params calls
The device probe method e1000_probe calls e1000_init_eeprom_params
itself so there's no reason to call it again from e1000_do_write_eeprom
or e1000_do_read_eeprom.
The sentence above assumes that e1000_init_eeprom_params is effective.
e1000_init_eeprom_params depends mostly on hw->mac_type and e1000_probe
bails out early if it can't set mac_type (see e1000_init_hw_struct, then
e1000_set_mac_type), qed.
Btw, if effective, the removed paths would had been deadlock prone when
e1000_eeprom_spi was set:
-> e1000_write_eeprom (takes e1000_eeprom_lock)
-> e1000_do_write_eeprom
-> e1000_init_eeprom_params
-> e1000_read_eeprom (takes e1000_eeprom_lock)
(same narrative with e1000_read_eeprom -> e1000_do_read_eeprom etc.)
As a final note, the candidate deadlock above can't happen in e1000_probe
due to the way eeprom->word_size is set / tested.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 307723255a05242ab252dd7047d4970ab60c7dfd) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jia-Ju Bai [Wed, 5 Aug 2015 10:16:10 +0000 (18:16 +0800)]
e1000e: Modify Tx/Rx configurations to avoid null pointer dereferences in e1000_open
When e1000e_setup_rx_resources is failed in e1000_open,
e1000e_free_tx_resources in "err_setup_rx" segment is executed.
"writel(0, tx_ring->head)" statement in e1000_clean_tx_ring
in e1000e_free_tx_resources will cause a null poonter dereference(crash),
because "tx_ring->head" is only assigned in e1000_configure_tx
in e1000_configure, but it is after e1000e_setup_rx_resources.
This patch moves head/tail register writing to e1000_configure_tx/rx,
which can fix this problem. It is inspired by igb_configure_tx_ring
in the igb driver.
Specially, thank Alexander Duyck for his valuable suggestion.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Orabug: 26243014
(cherry picked from commit 0845d45e900cad5f7f855a7a6a21c33477800b1f) Signed-off-by: Jack Vogel <jack.vogel@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Jan Beulich [Tue, 20 Jun 2017 17:47:18 +0000 (10:47 -0700)]
blkback/blktap: don't leak stack data via response ring
Rather than constructing a local structure instance on the stack, fill
the fields directly on the shared ring, just like other backends do.
Build on the fact that all response structure flavors are actually
identical (the old code did make this assumption too).
This is XSA-216.
Reported-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 26315576 Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Conflicts:
drivers/block/xen-blkback/blkback.c (code base)
Alan Maguire [Wed, 14 Jun 2017 13:06:27 +0000 (14:06 +0100)]
DTrace: IP provider use-after-free for drop-out probe points
KASan warnings showed a possible use-after-free for skbs in error handling
codepath after netfilter hooks have run. Hooks may free the skb, so we
should not derefence it at drop-out probe points after NF_HOOK().
Nick Alcock [Thu, 15 Jun 2017 21:04:08 +0000 (22:04 +0100)]
ctf: fix a variety of memory leaks and use-after-free bugs
These fall into two classes, but are sufficiently intertwined that it's
easier to commit them in one go.
The first is outright leaks, which exceed 1GiB on a normal run, varying
from the tiny (failure to free getline()'s line), through the disastrous
(failure to free items filtered from a list by list_filter(), leading to
the leaking of nearly the whole of the named_structs state, which is
huge). We also leak the structs_seen hash due to recreating it on
alias_fixup file switch without bothering to destroy it first,
The second is lifetime problems, centred around the stuff allocated and
freed in the detect_duplicates_tu_{init,/done}() functions. These were
comparing the module name against a saved copy to see if a new vars_seen
needed to be allocated, or whether this was just a flip of TU without a
change of object file and we could get away with just flushing its
contents out -- but unfortunately the state->module_name is assigned
directly from its parameter, and *that* has a lifetime lasting only
within process_file() -- and a deduplication run, of course, involves
iterating over a great many object files. So everything works as long as
we're flipping from TU to TU within a single object file, and then we
switch object files and are suddenly strcmp()ing with freed memory.
Discard this faulty optimization entirely, and just flush the vars_seen
hash in tu_done() and both create and destroy it in scan_duplicates(),
right where we create and destroy related stuff too.
Something similar happens with the state->dwfl_file_name due to its
derivation from id_file->file_name: if no duplicates are found, we
list_filter() that id_file straight out of the structs_seen list and
free it, and then on the next call state->dwfl_file_name points to freed
memory.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Acked-by: Kris Van Hees <kris.van.hees@oracle.com> Acked-by: Tomas Jedlicka <tomas.jedlicka@oracle.com>
Orabug: 26283357
percpu_ref: allow operation mode switching operations to be called concurrently
percpu_ref initially didn't have explicit mode switching operations.
It started out in percpu mode and switched to atomic mode on kill and
then released. Ensuring that kill operation is initiated only after
init completes was naturally the caller's responsibility.
percpu_ref_reinit() was introduced later but it didn't shift the
synchronization responsibility. Reinit can't be performed until kill
is confirmed, so there was nothing to worry about
synchronization-wise. Also, as both reinit and kill manipulate the
base reference, invocations of the same function couldn't be allowed
to race each other.
The latest additions of percpu_ref_switch_to_atomic/percpu() changed
the situation. These two functions can be called any time as long as
the percpu_ref is between init and exit and thus there are valid valid
usage scenarios where these new functions race with each other or
against reinit/kill. Mostly from inertia, f47ad4578461 ("percpu_ref:
decouple switching to percpu mode and reinit") still left
synchronization among percpu mode switching operations to its users.
That the new switch functions can be freely mixed with kill/reinit but
the operations themselves should be synchronized is too subtle a
requirement and led to a very subtle race condition in blk-mq freezing
path.
This patch fixes the situation by introducing percpu_ref_switch_lock
to protect mode switching operations. This ensures that percpu-ref
users don't have to worry about mode changing operations racing
against each other, e.g. switch_to_percpu against kill, as long as the
sequence of operations is valid.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ashok Vairavan <ashok.vairavan@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
* The users of __percpu_ref_switch_to_atomic/percpu() now call a new
function __percpu_ref_switch_mode() which calls either of the
original switching functions depending on the current state of
ref->force_atomic and the __PERCPU_REF_DEAD flag. The callers no
longer check whether switching is necessary but always invoke
__percpu_ref_switch_mode().
* !ref->confirm_switch waiting is collected into
__percpu_ref_switch_mode().
This patch doesn't cause any behavior differences.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ashok Vairavan <ashok.vairavan@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
projects / users / jedix / linux-maple.git / log