If CONFIG_DEBUG_SHIRQ was enabled, r8a77951-salvator-xs could boot
correctly. If we appended "earlycon keep_bootcon" to the kernel
command like, we could get kernel log like below.
SError Interrupt on CPU0, code 0xbf000002 -- SError
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-salvator-x-00505-g6c843129e6faaf01 #785
Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO BTYPE=--)
pc : rcar_gen3_phy_usb2_irq+0x14/0x54
lr : free_irq+0xf4/0x27c
This means free_irq() calls the interrupt handler while PM runtime
is not getting if DEBUG_SHIRQ is enabled and rcar_gen3_phy_usb2_probe()
failed. To fix the issue, move the irq registration place to
rcar_gen3_phy_usb2_init() which is ready to handle the interrupts.
Note that after the commit 549b6b55b005 ("phy: renesas: rcar-gen3-usb2:
enable/disable independent irqs") which is merged into v5.2, since this
driver creates multiple phy instances, needs to check whether one of
phy instances is initialized. However, if we backport this patch to v5.1
or less, we don't need to check it because such kernel have single
phy instance.
axg_card_add_tdm_loopback() misses to call kfree() in an error path. We
can use devm_kasprintf() to fix the issue, also improve maintainability.
So use it instead.
Fixes: c84836d7f650 ("ASoC: meson: axg-card: use modern dai_link style") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200717082242.130627-1-jingxiangfeng@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the masking of ret with 0xff and followed by a right shift
of 8 bits always leaves a zero result. It appears the mask of 0xff
is incorrect and should be 0xff00, but I don't have the hardware to
test this. Fix this to mask the upper 8 bits before shifting.
[ Not tested ]
Addresses-Coverity: ("Operands don't affect result") Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200716154720.1710252-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ask the LSM to free its audit rule rather than directly calling kfree().
Both AppArmor and SELinux do additional work in their audit_rule_free()
hooks. Fix memory leaks by allowing the LSMs to perform necessary work.
rxe_post_send_kernel() iterates over linked list of wr's, until the
wr->next ptr is NULL. However if we've got an interrupt after last wr is
posted, control may be returned to the code after send completion callback
is executed and wr memory is freed.
As a result, wr->next pointer may contain incorrect value leading to
panic. Store the wr->next on the stack before posting it.
QP's with the same SRQ, working on different CQs and running in parallel
on different CPUs could lead to a race when maintaining the SRQ consumer
count, and leads to FW running out of SRQs. Update the consumer
atomically. Make sure the wqe_prod is updated after the sge_prod due to
FW requirements.
Fixes: 3491c9e799fb ("qedr: Add support for kernel mode SRQ's") Link: https://lore.kernel.org/r/20200708195526.31040-1-ybason@marvell.com Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Basson <ybason@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd342a7eb09dbcd059d0b451b616d4dafc ("powerpc: Add VDSO version of getcpu") Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Anton Blanchard <anton@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c39 ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050ffd ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed1f ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When creating an FS_MODIFY event on inode itself (not on parent)
the file_name argument should be NULL.
The change to send a non NULL name to inode itself was done on purpuse
as part of another commit, as Tejun writes: "...While at it, supply the
target file name to fsnotify() from kernfs_node->name.".
But this is wrong practice and inconsistent with inotify behavior when
watching a single file. When a child is being watched (as opposed to the
parent directory) the inotify event should contain the watch descriptor,
but not the file name.
Fixes: df6a58c5c5aa ("kernfs: don't depend on d_find_any_alias()...") Link: https://lore.kernel.org/r/20200708111156.24659-5-amir73il@gmail.com Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
So add checks for these, and fail the module init for those cases.
[mkp: changed if condition to match error message]
Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com Fixes: c483739430f1 ("scsi_debug: add multiple queue support") Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon
system suspend.
led_set_brightness_nopm() uses schedule_work() to set LED brightness.
However, there's no guarantee that the scheduled work gets executed
because no one flushes the work.
So flush the scheduled work to make sure LED gets turned off.
If kobject_del() is invoked by kobject_cleanup() to delete the
target kobject, it may cause its parent kobject to be freed
before invoking the target kobject's ->release() method, which
effectively means freeing the parent before dealing with the
child entirely.
That is confusing at best and it may also lead to functional
issues if the callers of kobject_cleanup() are not careful enough
about the order in which these calls are made, so avoid the
problem by making kobject_cleanup() drop the last reference to
the target kobject's parent at the end, after invoking the target
kobject's ->release() method.
[ rjw: Rewrite the subject and changelog, make kobject_cleanup()
drop the parent reference only when __kobject_del() has been
called. ]
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: 7589238a8cf3 ("Revert "software node: Simplify software_node_release() function"") Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/1908555.IiAGLGrh1Z@kreacher Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to
match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise
the LTDC might suspend via runtime PM, disable clock, and then fail
to resume later on.
The test which triggers it is roughly -- run qt5 application which
uses eglfs platform and etnaviv, stop the application, sleep for 15
minutes, run the application again. This leads to a timeout waiting
for vsync, because the LTDC has suspended, but did not resume.
Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Yannick Fertré <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com>
To: dri-devel@lists.freedesktop.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The wake_up acquires the wait queue lock, but the add and remove do not.
Originally these were all protected by the pci_lock, but cdcb33f98244
("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved
wake_up_all() outside pci_lock, so it could race with add/remove
operations, which caused occasional kernel panics, e.g., during vfio-pci
hotplug/unplug testing:
Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000
Resolve this by using wait_event() instead of __add_wait_queue() and
__remove_wait_queue(). The wait queue lock is held by both wait_event()
and wake_up_all(), so it provides mutual exclusion.
Fixes: cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock") Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u
Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/ Based-on-patch-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xiang Zheng <zhengxiang9@huawei.com> Cc: Heyi Guo <guoheyi@huawei.com> Cc: Biaoxiang Ye <yebiaoxiang@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Quota reservations are supposed to account for the blocks that might be
allocated due to a bmap btree split. Reflink doesn't do this, so fix
this to make the quota accounting more accurate before we start
rearranging things.
Fixes: 862bb360ef56 ("xfs: reflink extents from one file to another") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The data fork scrubber calls filemap_write_and_wait to flush dirty pages
and delalloc reservations out to disk prior to checking the data fork's
extent mappings. Unfortunately, this means that scrub can consume the
EIO/ENOSPC errors that would otherwise have stayed around in the address
space until (we hope) the writer application calls fsync to persist data
and collect errors. The end result is that programs that wrote to a
file might never see the error code and proceed as if nothing were
wrong.
xfs_scrub is not in a position to notify file writers about the
writeback failure, and it's only here to check metadata, not file
contents. Therefore, if writeback fails, we should stuff the error code
back into the address space so that an fsync by the writer application
can pick that up.
Fixes: 99d9d8d05da2 ("xfs: scrub inode block mappings") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not fail probing when device_init_wakeup fails.
device_init_wakeup fails when the device is already enabled as wakeup
device. Hence, the driver fails to probe the device if:
- The device has already been enabled for wakeup (by e.g. sysfs)
- The driver has been unloaded and is being loaded again.
This goal of the patch is to fix the above cases.
Overwhelming majority of the drivers do not check device_init_wakeup
return code.
If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So
then the "strlen(model_names[i]) <= name_len" is true because strlen()
is unsigned and -ENOENT is type promoted to a very high positive value.
Then the "strncmp(name, model_names[i], name_len)" uses uninitialized
data because "name" is uninitialized.
Fixes: 92374e886c75 ("[media] firedtv: drop obsolete backend abstraction") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
YangYuxi is reporting that connection reuse
is causing one-second delay when SYN hits
existing connection in TIME_WAIT state.
Such delay was added to give time to expire
both the IPVS connection and the corresponding
conntrack. This was considered a rare case
at that time but it is causing problem for
some environments such as Kubernetes.
As nf_conntrack_tcp_packet() can decide to
release the conntrack in TIME_WAIT state and
to replace it with a fresh NEW conntrack, we
can use this to allow rescheduling just by
tuning our check: if the conntrack is
confirmed we can not schedule it to different
real server and the one-second delay still
applies but if new conntrack was created,
we are free to select new real server without
any delays.
YangYuxi lists some of the problem reports:
- One second connection delay in masquerading mode:
https://marc.info/?t=151683118100004&r=1&w=2
ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.
However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.
Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.
Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration") Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit bac8486116b0 ("iavf: Refactor the watchdog state machine") inverted
the logic for when to update statistics. Statistics should be updated when
no other commands are pending, instead they were only requested when a
command was processed. iavf_request_stats() would see a pending request
and not request statistics to be updated. This caused statistics to never
be updated; fix the logic.
Fixes: bac8486116b0 ("iavf: Refactor the watchdog state machine") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is an off-by-one bounds check on the index into arrays
table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that
can lead to reads and writes outside of arrays. Fix the bound checking
off-by-one error.
Addresses-Coverity: ("Out-of-bounds read/write") Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.
Fixes: 3eefe36cc00c ("media: marvell-ccic: use async notifier to get the sensor") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...
Change the dependency only disallow the analog portion of the driver
in that configuration.
Fixes: e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Data RAM on the device have to be powered on before starting to download
the firmware.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Co-developed-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Data RAM on the device have to be powered on before starting to download
the firmware.
Fixes: a1c49c434e15 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Co-developed-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Shifting the integer value 1 is evaluated using 32-bit arithmetic
and then used in an expression that expects a long value leads to
a potential integer overflow. Fix this by using the BIT macro to
perform the shift to avoid the overflow.
Addresses-Coverity: ("Unintentional integer overflow") Fixes: ad49f8602fe8 ("drm/arm: Add support for Mali Display Processors") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618100400.11464-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 65f037e8e908 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.
Fixes: 65f037e8e908 ("drm/etnaviv: add support for slave interface clock") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.
Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.
Fixes: 8ff6b3bc94930 ("iio: chemical: Add IIO_CONCENTRATION channel type") Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock
is held. Acquire the lock in a couple of error paths when calling that
function to ensure this condition is met.
Fixes: 6421969f248fd ("ath10k: refactor tx pending management") Fixes: e62ee5c381c59 ("ath10k: Add support for htt_data_tx_desc_64 descriptor") Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
'dma_alloc_coherent()' must be balanced by a call to 'dma_free_coherent()'
not 'dma_free_wc()'.
The correct dma_free_ function is already used in the error handling path
of the probe function.
Fixes: 77e196752bdd ("[ARM] pxafb: allow video memory size to be configurable") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Jani Nikula <jani.nikula@intel.com>
cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429084505.108897-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
A call of the function do_take_over_console() can fail here.
The corresponding system resources were not released then.
Thus add a call of iounmap() and release_mem_region()
together with the check of a failure predicate. and also
add release_mem_region() on device removal.
Fixes: e86bb8acc0fdc ("[PATCH] VT binding: Make newport_con support binding") Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423164251.3349-1-zhengdejin5@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In intel_gtt_setup_scratch_page(), pointer "page" is not released if
pci_dma_mapping_error() return an error, leading to a memory leak on
module initialisation failure. Simply fix this issue by freeing "page"
before return.
The AUX channel transfer error bits in the status register are latched
and need to be cleared. Clear them before doing our transfer so we
don't see old bits and get confused.
Without this patch having a single failure would mean that all future
transfers would look like they failed.
This can happen a lot when things go pear shaped. Lets not flood dmesg
when this happens.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Object reference counts are used as a part of ACPICA's garbage
collection mechanism. This mechanism keeps track of references to
heap-allocated structures such as the ACPI operand objects.
Recent server firmware has revealed that this reference count can
overflow on large servers that declare many field units under the
same operation_region. This occurs because each field unit declaration
will add a reference count to the source operation_region.
This change solves the reference count overflow for operation_regions
objects by preventing fieldunits from incrementing their
operation_region's reference count. Each operation_region's reference
count will not be changed by named objects declared under the Field
operator. During namespace deletion, the operation_region namespace
node will be deleted and each fieldunit will be deleted without
touching the deleted operation_region object.
Link: https://github.com/acpica/acpica/commit/e17b28cf Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.
But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {
2157 c->sb.version = ca->sb.version;
2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159 c->sb.flags = ca->sb.flags;
2160 c->sb.seq = ca->sb.seq;
2161 pr_debug("set version = %llu\n", c->sb.version);
2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.
The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.
But if the large bucket feature is enabled, sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.
This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.
Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.
Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.
Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To fix support for the O2 host controller Seabird1, set the quirk
SDHCI_QUIRK2_PRESET_VALUE_BROKEN and the capability bit MMC_CAP2_NO_SDIO.
Moreover, assign the ->get_cd() callback.
Fix up our comparison to better handle a potential (but largely
unlikely) wrap around.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.
On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).
This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.
Check the return value of pcie_capability_read_dword() to ensure success.
Add device support for the new ASUS ROG Zephyrus G14 (GA401I) and
G15 (GA502I) series.
This is accomplished by two new quirk entries (one per each series),
as well as all current available G401I/G502I DMI_PRODUCT_NAMEs to match
the corresponding devices.
Signed-off-by: Armas Spann <zappel@retarded.farm> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When USB or SDIO device got abnormal bus disconnection, host driver
tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger
slot linked to PSQ and TSQ), so we should set the state of skb hanger slot
to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb.
In brcmf_fws_bus_txq_cleanup it already sets
BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the
same thing in brcmf_fws_psq_flush to avoid following warning message.
Bss info flag definition need to be fixed from 0x2 to 0x4
This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.
Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org>
brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no
pending event or data. As a result, host driver does not poll firmware
console buffer before buffer overflow, which leads to missing firmware
logs. We should not stop SDIO watchdog if console_interval is non-zero
in debug build.
Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
176 | BUG();
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
for a very long time given a large process. This commit therefore adds
a cond_resched() to this loop, providing RCU any needed quiescent states.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Adding an msm_gem_object object to the inactive_list before completing
its initialization is a bad idea because shrinker may pick it up from the
inactive_list. Fix this by making sure that the initialization is complete
before moving the msm_obj object to the inactive list.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.
Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because we're holding the block_group->lock while trying to dump
the free space cache. However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As commit ef6b75671b5f ("mmc: sdhci-cadence: send tune request twice to
work around errata") stated, this IP has an errata. This commit applies
the second workaround for the SD mode.
Due to the errata, it is not possible to use the hardware tuning provided
by SDHCI_HOST_CONTROL2.
Use the software-controlled tuning like the eMMC mode.
Set sdhci_host_ops::platform_execute_tuning instead of overriding
mmc_host_ops::execute_tuning.
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.
nouveau_debugfs_strap_peek() calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs,
and etnaviv_gpu_init the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
hi3660-hikey960.dts:
Define a 'ports' node for 'adv7533: adv7533@39' and the
'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
binding.
This fills the requirements to meet the binding requirements,
remote endpoints are not defined.
hi6220-hikey.dts:
Change property name s/pd-gpio/pd-gpios, gpio properties should be
plural. This is just a cosmetic change.
While we expose the ability to turn off hardware dithering for nouveau,
we actually make the mistake of turning it on anyway, due to
dithering_depth containing a non-zero value if our dithering depth isn't
also set to 6 bpc.
So, fix it by never enabling dithering when it's disabled.
neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
savagefb_probe() calls savage_init_fb_info() that can successfully
allocate memory for info->pixmap.addr but then fail when
fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and
does not free allocated memory. It is not valid to go to label
failed_mmio since savage_init_fb_info() can fail during memory
allocation as well. So, the patch free allocated memory on the error
handling path in savage_init_fb_info() itself.
Found by Linux Driver Verification project (linuxtesting.org).
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc
Craig Topper suggested me in ClangBuiltLinux issue #1050:
> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.
First, I removed the trailing comma in the PRECOMPUTE line.
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if irq_src is NULL to avoid dereferencing a NULL pointer,
for MES ring is uneccessary to recieve an interrupt notification.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On a PREEMPT=n kernel, the try_release_extent_mapping() function's
"while" loop might run for a very long time on a large I/O. This commit
therefore adds a cond_resched() to this loop, providing RCU any needed
quiescent states.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log