Merge tag 'drm-msm-next-2020-12-07' of https://gitlab.freedesktop.org/drm/msm into drm-next

* Shutdown hook for GPU (to ensure GPU is idle before iommu goes away)
* GPU cooling device support
* DSI 7nm and 10nm phy/pll updates
* Additional sm8150/sm8250 DPU support (merge_3d and DSPP color
  processing)
* Various DP fixes
* A whole bunch of W=1 fixes from Lee Jones
* GEM locking re-work (no more trylock_recursive in shrinker!)
* LLCC (system cache) support
* Various other fixes/cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt0G=H3_RbF_GAQv838z5uujSmFd+7fYhL6Yg=23LwZ=g@mail.gmail.com

drm/msm: add IOMMU_SUPPORT dependency

The iommu pgtable support is only available when IOMMU support
is built into the kernel:

WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE
  Depends on [n]: IOMMU_SUPPORT [=n]
  Selected by [y]:
  - DRM_MSM [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_QCOM [=y] || SOC_IMX5 || ARM && COMPILE_TEST [=y]) && OF [=y] && COMMON_CLK [=y] && MMU [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n)

Fix the dependency accordingly. There is no need for depending on
CONFIG_MMU any more, as that is implied by the iommu support.

Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: a5xx: Make preemption reset case reentrant

nr_rings is reset to 1, but when this function is called for a second
(and third!) time nr_rings > 1 is false, thus the else case is entered
to set up a buffer for the RPTR shadow and consequently written to
RB_RPTR_ADDR, hanging platforms without WHERE_AM_I firmware support.

Restructure the condition in such a way that shadow buffer setup only
ever happens when has_whereami is true; otherwise preemption is only
finalized when the number of ring buffers has not been reset to 1 yet.

Fixes: 8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: enable DSPP support on SM8[12]50

Add support for color correction sub block on SM8150 and SM8250.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Fix use-after-free in msm_gem with carveout

When using gem with vram carveout the page allocation is managed via
drm_mm. The necessary drm_mm_node is allocated in add_vma, but it is
referenced in msm_gem_object as well. It is freed before the drm_mm_node
has been deallocated leading to use-after-free on every single vram
allocation.

Currently put_iova is called before put_pages in both
msm_gem_free_object and msm_gem_purge:

put_iova -> del_vma -> kfree(vma) // vma holds drm_mm_node
/* later */
put_pages -> put_pages_vram -> drm_mm_remove_node(
msm_obj->vram_node)
  // vram_node is a ref to
// drm_mm_node; in _msm_gem_new

It looks like del_vma does nothing else other than freeing the vma
object and removing it from it's list, so delaying the deletion should
be harmless.

This patch splits put_iova in put_iova_spaces and put_iova_vmas, so the
vma can be freed after the mm_node has been deallocated with the mm.

Note: The breaking commit separated the vma allocation from within
msm_gem_object to outside, so the vram_node reference became outside the
msm_gem_object allocation, and freeing order was therefore overlooked.

Fixes: 4b85f7f5cf7 ("drm/msm: support for an arbitrary number of address spaces")
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: fix connect/disconnect handled at irq_hpd

Some usb type-c dongle use irq_hpd request to perform device connection
and disconnection. This patch add handling of both connection and
disconnection are based on the state of hpd_state and sink_count.

Changes in V2:
-- add dp_display_handle_port_ststus_changed()
-- fix kernel test robot complaint

Changes in V3:
-- add encoder_mode_set into struct dp_display_private

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 26b8d66a399e ("drm/msm/dp: promote irq_hpd handle to handle link training correctly")
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dpu: update the qos remap only if the client type changes

Update the qos remap only if the client type changes for the plane.
This will avoid unnecessary register programming and also avoid log
spam from the dpu_vbif_set_qos_remap() function.

changes in v2:
 - get rid of the dirty flag and simplify the logic to call
   _dpu_plane_set_qos_remap()

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_interrupts: Demote kernel-doc formatting misuse

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:246: error: Cannot parse struct or union!
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:756: error: Cannot parse struct or union!

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shubhashree Dhar <dhar@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

Again, nothing big this time. Mostly a new performance counter from
Christian, some more lockdep annotations from Guido and removal of
functionality that duplicates driver core from Robin.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/81367a99b8949584e5becd334ac001b9ad3dc37a.camel@pengutronix.de

Merge tag 'mediatek-drm-next-5.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.11-2

1. Add MT8167 support
2. Cleanup function
3. Convert the dpi bindings to yaml
4. Drop local dma_parms
5. Fix formatting and provide missing member description
6. Introduce GEM object functions
7. Fix aliases name
8. Move MIPI DSI phy driver to phy folder

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130234807.936-1-chunkuang.hu@kernel.org

Merge tag 'exynos-drm-next-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Add a new mode support for HDMI
- support for 1920x1200x60Hz mode.

Cleanups
- Drop in_bridge_node from exynos_dsi
- Use a exynos_dsi object instead of a encoder object as drvdata.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1606798227-31967-1-git-send-email-inki.dae@samsung.com

Merge tag 'drm-intel-next-queued-2020-11-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 features for v5.11:

Highlights:
- Enable big joiner to join two pipes to one port to overcome pipe restrictions
  (Manasi, Ville, Maarten)

Display:
- More DG1 enabling (Lucas, Aditya)
- Fixes to cases without display (Lucas, José, Jani)
- Initial PSR state improvements (José)
- JSL eDP vswing updates (Tejas)
- Handle EDID declared max 16 bpc (Ville)
- Display refactoring (Ville)

Other:
- GVT features
- Backmerge

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com

drm/exynos: use exynos_dsi as drvdata

Use the exynos_dsi as drvdata instead of the encoder to further decouple
the driver from the encoder.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove in_bridge_node from exynos_dsi

We do not need to keep a reference to the in_bridge_node, but we can
simply drop it, once we found and attached the previous bridge.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/hdmi: add support for 1920x1200@60Hz mode

Add clock configuration for 154MHz pixelclock to Exynos542x HDMIPHY,
which is required for 1920x1200@60Hz mode. The PLL configuration data
has been taken from the vendor's kernel tree for the Odroid XU4 board.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

MAINTAINERS: add files for Mediatek DRM drivers

Mediatek MIPI DSI phy driver is moved from drivers/gpu/drm/mediatek to
drivers/phy/mediatek, so add the new folder to the Mediatek DRM drivers'
information.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

phy: mediatek: Move mtk_mipi_dsi_phy driver into drivers/phy/mediatek folder

mtk_mipi_dsi_phy is currently placed inside mediatek drm driver, but it's
more suitable to place a phy driver into phy driver folder, so move
mtk_mipi_dsi_phy driver into phy driver folder.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Vinod Koul <vkoul@kernel.org>

drm/mediatek: Separate mtk_mipi_tx to an independent module

mtk_mipi_tx is a part of mtk_drm module, but phy driver should be an
independent module rather than be part of drm module, so separate the phy
driver to an independent module.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/msm/dpu: consider vertical front porch in the prefill bw calculation

In case of panels with low vertical back porch, the prefill bw
requirement will be high as we will have less time(vbp+pw) to
fetch and fill the hw latency buffers before start of first line
in active period.

For ex:
Say hw_latency_line_buffers = 24, and if blanking vbp+pw = 10
Here we need to fetch 24 lines of data in 10 line times.
This will increase the bw to the ratio of linebuffers to blanking.

DPU hw can also fetch data during vertical front porch provided
interface prefetch is enabled. Use vfp in the prefill calculation
as dpu driver enables prefetch if the blanking is not sufficient
to fill the latency lines.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for using system cache on MMU500 based targets

GPU targets with an MMU-500 attached have a slightly different process for
enabling system cache. Use the compatible string on the IOMMU phandle
to see if an MMU-500 is attached and modify the programming sequence
accordingly.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/a6xx: Add support for using system cache(LLC)

The last level system cache can be partitioned to 32 different
slices of which GPU has two slices preallocated. One slice is
used for caching GPU buffers and the other slice is used for
caching the GPU SMMU pagetables. This talks to the core system
cache driver to acquire the slice handles, configure the SCID's
to those slices and activates and deactivates the slices upon
GPU power collapse and restore.

Some support from the IOMMU driver is also needed to make use
of the system cache to set the right TCR attributes. GPU then
has the ability to override a few cacheability parameters which
it does to override write-allocate to write-no-allocate as the
GPU hardware does not benefit much from it.

DOMAIN_ATTR_IO_PGTABLE_CFG is another domain level attribute used
by the IOMMU driver for pagetable configuration which will be used
to set a quirk initially to set the right attributes to cache the
hardware pagetables into the system cache.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
[saiprakash.ranjan: fix to set attr before device attach to iommu and rebase]
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: rearrange the gpu_rmw() function

The register read-modify-write construct is generic enough
that it can be used by other subsystems as needed, create
a more generic rmw() function and have the gpu_rmw() use
this new function.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge remote-tracking branch 'arm64/for-next/iommu/io-pgtable-domain-attr' into msm-next-staging

Pull in new iommu domain attr.

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp: remove duplicate include statement

linux/rational.h is included more than once, Remove the one that isn't
necessary.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: dsi: Constify dsi_host_ops

The only usage of dsi_host_ops is to assign its address to the ops field
in the mipi_dsi_host struct, which is a const pointer. Make it const to
allow the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/dp/dp_ctrl: Move 'tu' from the stack to the heap

'struct tu_algo_data' is huge ~400 Bytes.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/dp/dp_ctrl.c: In function ‘_dp_ctrl_calc_tu.constprop’:
 drivers/gpu/drm/msm/dp/dp_ctrl.c:938:1: warning: the frame size of 1184 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno/a6xx_gpu_state: Make some local functions static

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:83:7: warning: no previous prototype for ‘state_kcalloc’ [-Wmissing-prototypes]
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:95:7: warning: no previous prototype for ‘state_kmemdup’ [-Wmissing-prototypes]
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:947:6: warning: no previous prototype for ‘a6xx_gpu_state_destroy’ [-Wmissing-prototypes]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/msm_gem_shrinker: Fix descriptions for 'drm_device'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/msm_gem_shrinker.c:108: warning: Function parameter or member 'dev' not described in 'msm_gem_shrinker_init'
 drivers/gpu/drm/msm/msm_gem_shrinker.c:108: warning: Excess function parameter 'dev_priv' description in 'msm_gem_shrinker_init'
 drivers/gpu/drm/msm/msm_gem_shrinker.c:126: warning: Function parameter or member 'dev' not described in 'msm_gem_shrinker_cleanup'
 drivers/gpu/drm/msm/msm_gem_shrinker.c:126: warning: Excess function parameter 'dev_priv' description in 'msm_gem_shrinker_cleanup'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/msm_drv: Make '_msm_ioremap()' static

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/msm_drv.c:124:15: warning: no previous prototype for ‘_msm_ioremap’ [-Wmissing-prototypes]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_plane: Fix some spelling and missing function param descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Function parameter or member 'plane' not described in '_dpu_plane_calc_bw'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Function parameter or member 'fb' not described in '_dpu_plane_calc_bw'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:152: warning: Excess function parameter 'Plane' description in '_dpu_plane_calc_bw'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:200: warning: Function parameter or member 'plane' not described in '_dpu_plane_calc_clk'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:200: warning: Excess function parameter 'Plane' description in '_dpu_plane_calc_clk'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:232: warning: Function parameter or member 'src_width' not described in '_dpu_plane_calc_fill_level'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:232: warning: Excess function parameter 'src_wdith' description in '_dpu_plane_calc_fill_level'
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1060: warning: Function parameter or member 'error' not described in 'dpu_plane_set_error'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_vbif: Fix a couple of function param descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:150: warning: Function parameter or member 'dpu_kms' not described in 'dpu_vbif_set_ot_limit'
 drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:150: warning: Excess function parameter 'vbif' description in 'dpu_vbif_set_ot_limit'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_rm: Fix formatting issues and supply 'global_state' description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:247: warning: Excess function parameter 'Return' description in '_dpu_rm_check_lm_peer'
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:283: warning: Function parameter or member 'global_state' not described in '_dpu_rm_check_lm_and_get_connected_blks'
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:283: warning: Excess function parameter 'Return' description in '_dpu_rm_check_lm_and_get_connected_blks'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_sspp: Fix kernel-doc formatting abuse

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'ctx' not described in 'dpu_hw_sspp_setup_format'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'fmt' not described in 'dpu_hw_sspp_setup_format'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'flags' not described in 'dpu_hw_sspp_setup_format'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:240: warning: Function parameter or member 'rect_mode' not described in 'dpu_hw_sspp_setup_format'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'ctx' not described in 'dpu_hw_sspp_setup_rects'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'cfg' not described in 'dpu_hw_sspp_setup_rects'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:446: warning: Function parameter or member 'rect_index' not described in 'dpu_hw_sspp_setup_rects'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_lm: Fix misnaming of parameter 'ctx'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c:55: warning: Function parameter or member 'ctx' not described in '_stage_offset'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c:55: warning: Excess function parameter 'c' description in '_stage_offset'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_encoder: Fix a few parameter/member formatting issues

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'cur_slave' not described in 'dpu_encoder_virt'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'hw_pp' not described in 'dpu_encoder_virt'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:207: warning: Function parameter or member 'intfs_swapped' not described in 'dpu_encoder_virt'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'drm_enc' not described in '_dpu_encoder_trigger_flush'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'phys' not described in '_dpu_encoder_trigger_flush'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1445: warning: Function parameter or member 'extra_flush_bits' not described in '_dpu_encoder_trigger_flush'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1481: warning: Function parameter or member 'phys' not described in '_dpu_encoder_trigger_start'
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1564: warning: Function parameter or member 'dpu_enc' not described in '_dpu_encoder_kickoff_phys'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_catalog: Move definitions to the only place they are used

These tables are not large or overbearing, so moving them into the
source file seems like the right thing to do.  The alternative is to
use __maybe_unused, which is undesirable.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:11:
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:7:23: warning: ‘qcom_compressed_supported_formats’ defined but not used [-Wunused-const-variable=]
 7 | static const uint32_t qcom_compressed_supported_formats[] = {
 | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:48:23: warning: ‘plane_formats_yuv’ defined but not used [-Wunused-const-variable=]
 48 | static const uint32_t plane_formats_yuv[] = {
 | ^~~~~~~~~~~~~~~~~
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:17:23: warning: ‘plane_formats’ defined but not used [-Wunused-const-variable=]
 17 | static const uint32_t plane_formats[] = {
 | ^~~~~~~~~~~~~

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_catalog: Remove duplicated initialisation of 'max_linewidth'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: note: (near initialization for ‘sm8250_dpu_caps.max_linewidth’)

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_formats: Demote non-conformant kernel-doc header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fmt' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'a' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'r' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'g' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'b' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e0' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e1' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e2' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e3' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'uc' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'alpha' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'bp' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'flg' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fm' not described in 'INTERLEAVED_RGB_FMT'
 drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'np' not described in 'INTERLEAVED_RGB_FMT'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_hw_blk: Add one missing and remove an extra param description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:28: warning: Function parameter or member 'hw_blk' not described in 'dpu_hw_blk_init'
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:120: warning: Excess function parameter 'free_blk' description in 'dpu_hw_blk_put'

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_core_perf: Fix kernel-doc formatting issues

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:31: warning: Enum value 'DPU_PERF_MODE_MAX' not described in enum 'dpu_perf_mode'
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:34: warning: Cannot understand  * @_dpu_core_perf_calc_bw() - to calculate BW per crtc
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'kms' not described in '_dpu_core_perf_calc_clk'
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'crtc' not described in '_dpu_core_perf_calc_clk'
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'state' not described in '_dpu_core_perf_calc_clk'
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:249: warning: Cannot understand  * @dpu_core_perf_crtc_release_bw() - request zero bandwidth

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

msm/mdp5: Fix some kernel-doc warnings

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_set_encoder_state'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_set_encoder_state'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'enabled' not described in 'mdp5_ctl_set_encoder_state'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Excess function parameter 'enable' description in 'mdp5_ctl_set_encoder_state'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_commit'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_commit'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'flush_mask' not described in 'mdp5_ctl_commit'
 drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'start' not described in 'mdp5_ctl_commit'

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/mediatek: Use correct aliases name for ovl

Aliases property name must include only lowercase and '-', so fix this
in the driver, so we're not tempted to do "ovl_2l0 = &ovl_2l0" in the
device-tree instead of the right one which is "ovl-2l0 = &ovl_2l0".

Fixes: b17bdd0d7a73 ("drm/mediatek: add component OVL_2L0")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Merge tag 'drm-misc-next-2020-11-18' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-next

drm-misc-next for 5.11:

UAPI Changes:

 * media: Add MEDIA_BUS_FMT_RGB888_3X8_DELTA format

Cross-subsystem Changes:

 * console: Remove unused functions; Store characters-per-font in font-
   descriptor structure instead of hard-coding
 * DT: Add vendor prefix for ShenZhen Asia Better Technology Ltd. (ABT)

Core Changes:

 * Fix build warnings
 * Update debug logging to new interfaces, plus fixes
 * Add error messages for ioctls;
 * Fix kernel docs
 * doc: Fix kernel docs
 * fbcon: Remove accelerated scrolling
 * selftests: Fix build warnings
 * ttm: Fix missing NULL check in new page pool; Fix build warnings
 * video: Fix kernel docs

Driver Changes:

 * armada: Fix build warnings
 * atmel-hlcdc: Fix build warnings
 * exynos: Fix build warnings
 * gma500: Remove 2d framebuffer acceleration
 * lima: Fix build warnings; Cleanups
 * mediatek: Fix build warnings
 * meson: Module removal fixes; Fix build warnings
 * nouveau: Fix build warnings
 * omap: Fix return values
 * panel: Fix build warnings; Add support and DT bindings for OnePlus 6/T; Add
   support and DT bindings for ABT Y030XX067A
 * panel/s6e63m0: Add/improve SPi reading/writing; Support 3WIRE protocol; Set
   connector display info; Add more comments
 * panfrost: Move GPU reset into separate worker, avoid race conditions
 * pl111: Fix build warnings
 * qxl: Cleanup fbcon acceleration
 * rockchip: Fix build warnings
 * savage: Fix build warnings
 * sti: Fix build warnings
 * udl: Fix missing error code in udl_handle_damage()
 * v3d: Fix build warnings
 * vc4: Fix build warnings
 * via: Fix build warnings
 * virtio: Make dma-buf ops static

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118123221.GA19755@linux-uq9g

drm/i915/display: Defer initial modeset until after GGTT is initialised

Prior to sanitizing the GGTT, the only operations allowed in
intel_display_init_nogem() are those to reserve the preallocated (and
active) regions in the GGTT leftover from the BIOS. Trying to allocate a
GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset)
may then conflict with other preallocated regions that have not yet been
protected.

Move the initial modesetting from the end of init_nogem to the beginning
of init so that any vma pinning (either framebuffers or DSB, for example),
is after the GGTT is ready to handle it.

This will prevent the DSB object from being destroyed too early:

[   53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345

[   53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G        W         5.10.0-rc5+ #12
[   53.449409] Call Trace:
[   53.449418]  dump_stack+0x9a/0xcc
[   53.449558]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449565]  print_address_description.constprop.0+0x3e/0x60
[   53.449577]  ? _raw_spin_lock_irqsave+0x4e/0x50
[   53.449718]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449849]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.449857]  kasan_report.cold+0x1f/0x37
[   53.449993]  ? i915_init_ggtt+0x324/0x9e0 [i915]
[   53.450130]  i915_init_ggtt+0x324/0x9e0 [i915]
[   53.450273]  ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
[   53.450281]  ? static_obj+0x69/0x80
[   53.450289]  ? lockdep_init_map_waits+0xa9/0x310
[   53.450431]  ? intel_wopcm_init+0x96/0x3d0 [i915]
[   53.450581]  ? i915_gem_init+0x75/0x2d0 [i915]
[   53.450720]  i915_gem_init+0x75/0x2d0 [i915]
[   53.450852]  i915_driver_probe+0x8c2/0x1210 [i915]
[   53.450993]  ? i915_pm_prepare+0x630/0x630 [i915]
[   53.451006]  ? check_chain_key+0x1e7/0x2e0
[   53.451025]  ? __pm_runtime_resume+0x58/0xb0
[   53.451157]  i915_pci_probe+0xa6/0x2b0 [i915]
[   53.451285]  ? i915_pci_remove+0x40/0x40 [i915]
[   53.451295]  ? lockdep_hardirqs_on_prepare+0x124/0x230
[   53.451302]  ? _raw_spin_unlock_irqrestore+0x42/0x50
[   53.451309]  ? lockdep_hardirqs_on+0xbf/0x130
[   53.451315]  ? preempt_count_sub+0xf/0xb0
[   53.451321]  ? _raw_spin_unlock_irqrestore+0x2f/0x50
[   53.451335]  pci_device_probe+0xf9/0x190
[   53.451350]  really_probe+0x17f/0x5b0
[   53.451365]  driver_probe_device+0x13a/0x1c0
[   53.451376]  device_driver_attach+0x82/0x90
[   53.451386]  ? device_driver_attach+0x90/0x90
[   53.451391]  __driver_attach+0xab/0x190
[   53.451401]  ? device_driver_attach+0x90/0x90
[   53.451407]  bus_for_each_dev+0xe4/0x140
[   53.451414]  ? subsys_dev_iter_exit+0x10/0x10
[   53.451423]  ? __list_add_valid+0x2b/0xa0
[   53.451440]  bus_add_driver+0x227/0x2e0
[   53.451454]  driver_register+0xd3/0x150
[   53.451585]  i915_init+0x92/0xac [i915]
[   53.451592]  ? 0xffffffffa0a20000
[   53.451598]  do_one_initcall+0xb6/0x3b0
[   53.451606]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[   53.451614]  ? __kasan_kmalloc.constprop.0+0xc2/0xd0
[   53.451627]  ? kmem_cache_alloc_trace+0x4a4/0x8e0
[   53.451634]  ? kasan_unpoison_shadow+0x33/0x40
[   53.451649]  do_init_module+0xf8/0x350
[   53.451662]  load_module+0x43de/0x47f0
[   53.451716]  ? module_frob_arch_sections+0x20/0x20
[   53.451731]  ? rw_verify_area+0x5f/0x130
[   53.451780]  ? __do_sys_finit_module+0x10d/0x1a0
[   53.451785]  __do_sys_finit_module+0x10d/0x1a0
[   53.451792]  ? __ia32_sys_init_module+0x40/0x40
[   53.451800]  ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0
[   53.451829]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   53.451835]  ? mark_held_locks+0x24/0x90
[   53.451856]  do_syscall_64+0x33/0x80
[   53.451863]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.451868] RIP: 0033:0x7fde09b4470d
[   53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48
[   53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d
[   53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f
[   53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded
[   53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150

[   53.451957] Allocated by task 345:
[   53.451995]  kasan_save_stack+0x1b/0x40
[   53.452001]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   53.452006]  kmem_cache_alloc+0x1cd/0x8d0
[   53.452146]  i915_vma_instance+0x126/0xb70 [i915]
[   53.452304]  i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915]
[   53.452446]  intel_dsb_prepare+0x14f/0x230 [i915]
[   53.452588]  intel_atomic_commit+0x183/0x690 [i915]
[   53.452730]  intel_initial_commit+0x2bc/0x2f0 [i915]
[   53.452871]  intel_modeset_init_nogem+0xa02/0x2af0 [i915]
[   53.452995]  i915_driver_probe+0x8af/0x1210 [i915]
[   53.453120]  i915_pci_probe+0xa6/0x2b0 [i915]
[   53.453125]  pci_device_probe+0xf9/0x190
[   53.453131]  really_probe+0x17f/0x5b0
[   53.453136]  driver_probe_device+0x13a/0x1c0
[   53.453142]  device_driver_attach+0x82/0x90
[   53.453148]  __driver_attach+0xab/0x190
[   53.453153]  bus_for_each_dev+0xe4/0x140
[   53.453158]  bus_add_driver+0x227/0x2e0
[   53.453164]  driver_register+0xd3/0x150
[   53.453286]  i915_init+0x92/0xac [i915]
[   53.453292]  do_one_initcall+0xb6/0x3b0
[   53.453297]  do_init_module+0xf8/0x350
[   53.453302]  load_module+0x43de/0x47f0
[   53.453307]  __do_sys_finit_module+0x10d/0x1a0
[   53.453312]  do_syscall_64+0x33/0x80
[   53.453318]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.453345] Freed by task 82:
[   53.453379]  kasan_save_stack+0x1b/0x40
[   53.453384]  kasan_set_track+0x1c/0x30
[   53.453389]  kasan_set_free_info+0x1b/0x30
[   53.453394]  __kasan_slab_free+0x112/0x160
[   53.453399]  kmem_cache_free+0xb2/0x3f0
[   53.453536]  i915_gem_flush_free_objects+0x31a/0x3b0 [i915]
[   53.453542]  process_one_work+0x519/0x9f0
[   53.453547]  worker_thread+0x75/0x5c0
[   53.453552]  kthread+0x1da/0x230
[   53.453557]  ret_from_fork+0x22/0x30

[   53.453584] The buggy address belongs to the object at ffff88811b1e8040
                which belongs to the cache i915_vma of size 968
[   53.453692] The buggy address is located 48 bytes inside of
                968-byte region [ffff88811b1e8040, ffff88811b1e8408)
[   53.453792] The buggy address belongs to the page:
[   53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8
[   53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0
[   53.453853] flags: 0x8000000000010200(slab|head)
[   53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340
[   53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000
[   53.453870] page dumped because: kasan: bad access detected

[   53.453895] Memory state around the buggy address:
[   53.453944]  ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   53.454011]  ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[   53.454146]                                                              ^
[   53.454211]  ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   53.454279]  ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   53.454347] ==================================================================
[   53.454414] Disabling lock debugging due to kernel taint
[   53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI
[   53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G    B   W         5.10.0-rc5+ #12
[   53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915]
[   53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8
[   53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286
[   53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f
[   53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160
[   53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000
[   53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0
[   53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160
[   53.454664] FS:  00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000
[   53.454672] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0
[   53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   53.454700] Call Trace:
[   53.454833]  ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]

Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk

drm/mediatek: Introduce GEM object functions

GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in mediatek. The only exception is gem_prime_mmap,
which is non-trivial to convert.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

iommu/io-pgtable-arm: Add support to use system cache

Add a quirk IO_PGTABLE_QUIRK_ARM_OUTER_WBWA to override
the outer-cacheability attributes set in the TCR for a
non-coherent page table walker when using system cache.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/f818676b4a2a9ad1edb92721947d47db41ed6a7c.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>

iommu/io-pgtable: Add a domain attribute for pagetable configuration

Add a new iommu domain attribute DOMAIN_ATTR_IO_PGTABLE_CFG
for pagetable configuration which initially will be used to
set quirks like for system cache aka last level cache to be
used by client drivers like GPU to set right attributes for
caching the hardware pagetables into the system cache and
later can be extended to include other page table configuration
data.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/9190aa16f378fc0a7f8e57b2b9f60b033e7eeb4f.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>

Merge tag 'gvt-next-2020-11-23' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-11-23

- Fix host suspend/resume with vGPU (Colin)
- optimize idr init (Varma)
- Change intel_gvt_mpt as const (Julian)
- One comment error fix (Yan)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123090517.GC16939@zhen-hp.sh.intel.com

drm/msm/disp/dpu1/dpu_encoder: Remove a bunch of unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_mode_set’:
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:981:31: warning: variable ‘num_dspp’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:976:30: warning: variable ‘topology’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘_dpu_encoder_virt_enable_helper’:
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1099:26: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_disable’:
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1210:18: warning: variable ‘dpu_kms’ set but not used [-Wunused-but-set-variable]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/dpu1/dpu_core_perf: Remove set but unused variable 'dpu_cstate'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function ‘_dpu_core_perf_calc_crtc’:
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:113:25: warning: variable ‘dpu_cstate’ set but not used [-Wunused-but-set-variable]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/mdp5/mdp5_kms: Make local functions 'mdp5_{en, dis}able()' static

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:299:5: warning: no previous prototype for ‘mdp5_disable’ [-Wmissing-prototypes]
 drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:319:5: warning: no previous prototype for ‘mdp5_enable’ [-Wmissing-prototypes]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/disp/mdp5/mdp5_crtc: Make local function 'mdp5_crtc_setup_pipeline()' static

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:581:5: warning: no previous prototype for ‘mdp5_crtc_setup_pipeline’ [-Wmissing-prototypes]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/adreno/a6xx_gpu: Staticise local function 'a6xx_idle'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/msm/adreno/a6xx_gpu.c:33:6: warning: no previous prototype for ‘a6xx_idle’ [-Wmissing-prototypes]

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/i915/gvt: treat intel_gvt_mpt as const in gvt code

The current interface of intel_gvt_register_hypervisor() expects a
non-const pointer to struct intel_gvt_mpt, even though the mediator
never modifies (or should modifiy) the content of this struct.

Change the function signature and relevant struct members to const to
properly express the API's intent and allow instances of intel_gvt_mpt
to be allocated as const.

While I was here, I also made KVM's instance of this struct const to
reduce the number of writable function pointers in the kernel.

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201111172811.558443-1-julian.stecklina@cyberus-technology.de

drm/mediatek/mtk_disp_ovl: Fix formatting and provide missing member description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/mediatek/mtk_disp_ovl.c:75: warning: Function parameter or member 'ddp_comp' not described in 'mtk_disp_ovl'
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c:75: warning: Function parameter or member 'crtc' not described in 'mtk_disp_ovl'
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c:75: warning: Function parameter or member 'data' not described in 'mtk_disp_ovl'

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek/mtk_disp_color: Fix formatting and provide missing member description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/mediatek/mtk_disp_color.c:40: warning: Function parameter or member 'ddp_comp' not described in 'mtk_disp_color'
 drivers/gpu/drm/mediatek/mtk_disp_color.c:40: warning: Function parameter or member 'crtc' not described in 'mtk_disp_color'
 drivers/gpu/drm/mediatek/mtk_disp_color.c:40: warning: Function parameter or member 'data' not described in 'mtk_disp_color'

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek/mtk_drm_drv: Staticise local function invoked by reference

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/mediatek/mtk_drm_drv.c:316:24: warning: no previous prototype for ‘mtk_drm_gem_prime_import’ [-Wmissing-prototypes]

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: YT SHEN <yt.shen@mediatek.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek/mtk_disp_rdma: Fix formatting and supply missing struct member description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/mediatek/mtk_disp_rdma.c:66: warning: Function parameter or member 'ddp_comp' not described in 'mtk_disp_rdma'
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c:66: warning: Function parameter or member 'crtc' not described in 'mtk_disp_rdma'
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c:66: warning: Function parameter or member 'data' not described in 'mtk_disp_rdma'

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Drop local dma_parms

Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms
for platform devices"), struct platform_device already provides a
dma_parms structure, so we can save allocating another one.

Also the DMA segment size is simply a size, not a bitmask.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/msm/shrinker: Only iterate dontneed objs

In situations where the GPU is mostly idle, all or nearly all buffer
objects will be in the inactive list.  But if the system is under memory
pressure (from something other than GPU), we could still get a lot of
shrinker calls.  Which results in traversing a list of thousands of objs
and in the end finding nothing to shrink.  Which isn't so efficient.

Instead split the inactive_list into two lists, one inactive objs which
are shrinkable, and a second one for those that are not.  This way we
can avoid traversing objs which we know are not shrinker candidates.

v2: Fix inverted logic think-o

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm/shrinker: We can vmap shrink active_list too

Just because a obj is active, if the vmap_count is zero, we can still
tear down the vmap.

Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Protect obj->active_count under obj lock

Previously we only held obj lock in the _active_get() path, and relied
on atomic_dec_return() to not be racy in the _active_put() path where
obj lock was not held.

But this is a false sense of security.  Unlike obj lifetime refcnt,
where you do not expect to *increase* the refcnt after the last put
(which would mean that something has gone horribly wrong with the
object liveness reference counting), the active_count can increase
again from zero.  Racing _active_put()s and _active_get()s could leave
the obj on the wrong mm list.

But in the retire path, immediately after the _active_put(), the
_unpin_iova() would acquire obj lock.  So just move the locking earlier
and rely on that to protect obj->active_count.

Fixes: c5c1643cef7a ("drm/msm: Drop struct_mutex from the retire path")
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/i915/dg1: Enable ports

For DG1 we have a little of mix up wrt to DDI/port names and indexes.
Bspec refers to the ports as DDIA, DDIB, DDI USBC1 and DDI USBC2
(besides the DDIA, DDIB, DDIC, DDID), but the previous naming is the
most unambiguous one. This means that for any register on Display Engine
we should use the index of A, B, D and E. However in some places this is
not true:

- VBT: uses C and D and have to be mapped to D/E

- IO/Combo: uses C and D, but we already differentiate those when
  we created the phy vs port distinction.

This additional mapping for VBT and phy are already covered in previous
patches, so now we can initialize all the DDIs as A, B, D and E.

v2: Squash previous patch enabling just ports A and B since most of the
pumbling code is already merged now

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117084836.2318234-1-lucas.demarchi@intel.com

drm/i915: Do not call hsw_set_frame_start_delay for dsi

This should fix the boot oops for dsi

v2:
* Fix indent (Manasi)
v3:
* Remove redundant condition (Matt Roper)

Fixes: 4e3cdb4535e7 ("drm/i915/dp: Master/Slave enable/disable sequence for bigjoiner")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119232615.23231-1-manasi.d.navare@intel.com

drm/i915/display: Whitespace cleanups

drivers/gpu/drm/i915/display/intel_display.c:3634 intel_find_initial_plane_obj() warn: inconsistent indenting
drivers/gpu/drm/i915/display/intel_display.c:15367 kill_bigjoiner_slave() warn: inconsistent indenting

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119090717.30687-1-chris@chris-wilson.co.uk

drm/i915/perf: workaround register corruption in OATAILPTR

After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.

When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.

The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.

This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df2859eb1 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com

drm/i915: Enable bigjoiner

Enough plumbing should be in place to throw the bigjoiner switch.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-16-manasi.d.navare@intel.com

drm/i915: Add bigjoiner state dump

Add a big of bigjoiner information to the state dump.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-15-manasi.d.navare@intel.com

drm/i915: Fix cursor src/dst rectangle with bigjoiner

We can't call drm_plane_state_src() this late for the slave plane since
it would consult the wrong uapi state. We've alreayd done the correct
uapi->hw copy earlier, so let's just preserve the unclipped src/dst
rects using a temp copy across the intel_atomic_plane_check_clipping()
call.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-14-manasi.d.navare@intel.com

drm/i915: Disable legacy cursor fastpath for bigjoiner

The legacy cursor fastpath code doesn't deal with bigjoiner.
Disable the fastpath for now.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-13-manasi.d.navare@intel.com

drm/i915: Add debugfs dumping for bigjoiner, v3.

Dump debugfs and planar links as well, this will make it easier to debug
when things go wrong.

v4:
* Rebase
Changes since v1:
- Report planar slaves as such, now that we have the plane_state switch.
Changes since v2:
- Rebase on top of the new plane format dumping

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-12-manasi.d.navare@intel.com

drm/i915: Add bigjoiner aware plane clipping checks

We need to look at hw.fb for the framebuffer, and add the translation
for the slave_plane_state. With these changes we set the correct
rectangle on the bigjoiner slave, and don't set incorrect
src/dst/visibility on the slave plane.

v2:
* Manual rebase (Manasi)

v3:
* hw.rotation instead of uapi.rotation (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-11-manasi.d.navare@intel.com

drm/i915: Get the uapi state from the correct plane when bigjoiner is used

When using bigjoiner userspace is only controlling the "master"
plane, so use its uapi state for the "slave" plane as well.

hw.crtc needs a bit of magic since we don't want to copy that from
the uapi state (as it points to the wrong pipe for the "slave
" plane). Instead we pass the right crtc in explicitly but only
assign it when the uapi state indicates the plane to be logically
enabled (ie. uapi.crtc != NULL).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-10-manasi.d.navare@intel.com

drm/i915: Add planes affected by bigjoiner to the state

Make sure both the bigjoiner "master" and "slave" plane are
in the state whenever either of them is in the state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-9-manasi.d.navare@intel.com

drm/i915: Add crtcs affected by bigjoiner to the state

Make sure both crtcs participating in the bigjoiner stuff
are in the state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-8-manasi.d.navare@intel.com

drm/i915: HW state readout for Bigjoiner case

Skip iterating over bigjoiner slaves, only the master has the state we
care about.

Add the width of the bigjoiner slave to the reconstructed fb.

Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.

And last, disable bigjoiner slave from primary if reconstruction fails.

v3:
* Fix the ddi_get_config slave error (Ankit Nautiyal)
v2:
* Unsupported bigjoiner config for initial fb (Ville)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* Don't do any hw->uapi state copy for bigjoiner slave
* We still have hw.mode so no need to pass it in
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-7-manasi.d.navare@intel.com

drm/i915/dp: Master/Slave enable/disable sequence for bigjoiner

Enabling is done in a special sequence and so should plane updates
be. Ideally the end user never notices the second pipe is used.

This way ideally everything will be tear free, and updates are
really atomic as userspace expects it.

This uses generic modeset_enables() calls like trans port sync
but still has special handling for disable since for slave we
should not disable things like encoder, plls that are not enabled
for  slave.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-6-manasi.d.navare@intel.com

drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave

Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com

drm/i915: Try to make bigjoiner work in atomic check

 When the clock is higher than the dotclock, try with 2 pipes enabled.
 If we can enable 2, then we will go into big joiner mode, and steal
 the adjacent crtc.

 This only links the crtc's in software, no hardware or plane
 programming is done yet. Blobs are also copied from the master's
 crtc_state, so it doesn't depend at commit time on the other
 crtc_state.

v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
 Changes since v1:
 - Rename pipe timings to transcoder timings, as they are now different.
  Changes since v2:
 - Rework bigjoiner checks; always disable slave when recalculating
   master. No need to have a separate bigjoiner pass any more.
 - Use pipe_mode instead of transcoder_mode, to clean up the code.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com

drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.

Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.

v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)

Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
  and split off the downstream and source checking to its own function.
  (Ville)
v3:
* Rebase (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com

drm/i915: Copy the plane hw state directly for Y planes

When doing the plane state copy from the UV plane to the Y plane
let's just copy the hw state directly instead of using the original
uapi state. The UV plane has already had its uapi state copied into
its hw state, so this extra detour via the uapi state for the Y plane
is pointless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-2-manasi.d.navare@intel.com

drm/i915: Fix the DDI encoder names

I totally fumbled the ?: usage when generating the DDI encoder
names. Reverse the things that need reversing, and to make it
a bit less messy add a few macros to hide the arithmetic on the
port enums.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 2d709a5a624c ("drm/i915: Give DDI encoders even better names")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117154028.8516-1-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/docs: Fix todo.rst

I didnt' format the thing correctly :-(

Fixes: 39aead8373b3 ("fbcon: Disable accelerated scrolling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118073637.597206-1-daniel.vetter@ffwll.ch

include/drm/drm_atomic: Make use of 'new_crtc_state'

In the macro for_each_oldnew_crtc_in_state() 'crtc_state' is provided
as a container for state->crtcs[i].new_state, but is not utilised in
some use-cases, so we fake-use it instead.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/imx/ipuv3-plane.c: In function ‘ipu_planes_assign_pre’:
 drivers/gpu/drm/imx/ipuv3-plane.c:746:42: warning: variable ‘crtc_state’ set but not used [-Wunused-but-set-variable]

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-43-lee.jones@linaro.org

drm/vc4/vc4_debugfs: Demote non-conformant kernel-doc headers

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_debugfs.c:25: warning: Function parameter or member 'minor' not described in 'vc4_debugfs_init'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'dev' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'name' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'show' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'data' not described in 'vc4_debugfs_add_file'

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-41-lee.jones@linaro.org

drm/vc4/vc4_v3d: Demote non-conformant kernel-doc headers

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_v3d.c:131: warning: Function parameter or member 'vc4' not described in 'vc4_v3d_pm_get'
 drivers/gpu/drm/vc4/vc4_v3d.c:231: warning: Function parameter or member 'vc4' not described in 'bin_bo_alloc'

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-40-lee.jones@linaro.org

drm/vc4/vc4_hdmi: Remove set but unused variable 'ret'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_set_audio_infoframe’:
 drivers/gpu/drm/vc4/vc4_hdmi.c:334:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-39-lee.jones@linaro.org

drm/vc4/vc4_hdmi_regs: Mark some data sets as __maybe_unused

The alternative is to move them into the source file that uses then,
but they are large and intrusive, so that strategy is being avoided.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:282:39: warning: ‘vc5_hdmi_hdmi1_fields’ defined but not used [-Wunused-const-variable=]
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:206:39: warning: ‘vc5_hdmi_hdmi0_fields’ defined but not used [-Wunused-const-variable=]
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:145:39: warning: ‘vc4_hdmi_fields’ defined but not used [-Wunused-const-variable=]

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-38-lee.jones@linaro.org

drm/v3d/v3d_sched: Demote non-conformant kernel-doc header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 'sched_job' not described in 'v3d_job_dependency'
 drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 's_entity' not described in 'v3d_job_dependency'

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-37-lee.jones@linaro.org

drm/v3d/v3d_gem: Provide descriptions for 'v3d_lookup_bos's params

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_handles' not described in 'v3d_lookup_bos'
 drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_count' not described in 'v3d_lookup_bos'

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-36-lee.jones@linaro.org

drm/v3d/v3d_drv: Remove unused static variable 'v3d_v3d_pm_ops'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_drv.c:73:32: warning: ‘v3d_v3d_pm_ops’ defined but not used [-Wunused-const-variable=]

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-35-lee.jones@linaro.org

drm/ttm/ttm_tt: Demote kernel-doc header format abuses

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_tt.c:45: warning: Function parameter or member 'bo' not described in 'ttm_tt_create'
 drivers/gpu/drm/ttm/ttm_tt.c:45: warning: Function parameter or member 'zero_alloc' not described in 'ttm_tt_create'
 drivers/gpu/drm/ttm/ttm_tt.c:83: warning: Function parameter or member 'ttm' not described in 'ttm_tt_alloc_page_directory'

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-33-lee.jones@linaro.org

drm/ttm/ttm_range_manager: Demote non-conformant kernel-doc header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_range_manager.c:46: warning: cannot understand function prototype: 'struct ttm_range_manager '

Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-34-lee.jones@linaro.org

drm/ttm/ttm_bo: Fix one function header - demote lots of kernel-doc abuses

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/ttm/ttm_bo.c:51: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX'
 drivers/gpu/drm/ttm/ttm_bo.c:286: warning: Function parameter or member 'bo' not described in 'ttm_bo_cleanup_memtype_use'
 drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'bo' not described in 'ttm_bo_cleanup_refs'
 drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'interruptible' not described in 'ttm_bo_cleanup_refs'
 drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'no_wait_gpu' not described in 'ttm_bo_cleanup_refs'
 drivers/gpu/drm/ttm/ttm_bo.c:359: warning: Function parameter or member 'unlock_resv' not described in 'ttm_bo_cleanup_refs'
 drivers/gpu/drm/ttm/ttm_bo.c:424: warning: Function parameter or member 'bdev' not described in 'ttm_bo_delayed_delete'
 drivers/gpu/drm/ttm/ttm_bo.c:424: warning: Function parameter or member 'remove_all' not described in 'ttm_bo_delayed_delete'
 drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'bo' not described in 'ttm_bo_evict_swapout_allowable'
 drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'ctx' not described in 'ttm_bo_evict_swapout_allowable'
 drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'locked' not described in 'ttm_bo_evict_swapout_allowable'
 drivers/gpu/drm/ttm/ttm_bo.c:635: warning: Function parameter or member 'busy' not described in 'ttm_bo_evict_swapout_allowable'
 drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'bo' not described in 'ttm_bo_add_move_fence'
 drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'man' not described in 'ttm_bo_add_move_fence'
 drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'mem' not described in 'ttm_bo_add_move_fence'
 drivers/gpu/drm/ttm/ttm_bo.c:769: warning: Function parameter or member 'no_wait_gpu' not described in 'ttm_bo_add_move_fence'
 drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'bo' not described in 'ttm_bo_mem_force_space'
 drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'place' not described in 'ttm_bo_mem_force_space'
 drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'mem' not described in 'ttm_bo_mem_force_space'
 drivers/gpu/drm/ttm/ttm_bo.c:806: warning: Function parameter or member 'ctx' not described in 'ttm_bo_mem_force_space'
 drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'bo' not described in 'ttm_bo_mem_space'
 drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space'
 drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'mem' not described in 'ttm_bo_mem_space'
 drivers/gpu/drm/ttm/ttm_bo.c:872: warning: Function parameter or member 'ctx' not described in 'ttm_bo_mem_space'
 drivers/gpu/drm/ttm/ttm_bo.c:1387: warning: Function parameter or member 'ctx' not described in 'ttm_bo_swapout'

Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-32-lee.jones@linaro.org

drm/selftests/test-drm_dp_mst_helper: Move 'sideband_msg_req_encode_decode' onto the heap

There is too much data being stored on the stack.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c: In function ‘sideband_msg_req_encode_decode’:
 drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c:168:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-31-lee.jones@linaro.org

drm/selftests/test-drm_dp_mst_helper: Place 'struct drm_dp_sideband_msg_req_body' onto the heap

The stack is too full.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c: In function ‘sideband_msg_req_encode_decode’:
 drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c:161:1: warning: the frame size of 1176 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-30-lee.jones@linaro.org

drm/selftests/test-drm_framebuffer: Remove set but unused variable 'fb'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/selftests/test-drm_framebuffer.c: In function ‘execute_drm_mode_fb_cmd2’:
 drivers/gpu/drm/selftests/test-drm_framebuffer.c:333:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-29-lee.jones@linaro.org

drm/selftests/test-drm_mm: Mark 'hole_end' as always_unused

In the macro drm_mm_for_each_hole() 'hole_end' is provided as a
container for 'hole_start + pos->hole_size', but is not utilised in
this use-case.  We cannot simply delete the variable, so here we tell
the compiler that we're intentionally discarding the read value.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/selftests/test-drm_mm.c: In function ‘assert_no_holes’:
 drivers/gpu/drm/selftests/test-drm_mm.c:57:18: warning: variable ‘hole_end’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nirmoy Das <nirmoy.aiemd@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-28-lee.jones@linaro.org

drm/rockchip/rockchip_lvds: Fix struct document formatting

Must start with "struct <name>"

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/rockchip/rockchip_lvds.c:49: warning: cannot understand function prototype: 'struct rockchip_lvds_soc_data '

Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-27-lee.jones@linaro.org

drm/rockchip/rockchip_rgb: Consume our own header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/rockchip/rockchip_rgb.c:71:22: warning: no previous prototype for ‘rockchip_rgb_init’ [-Wmissing-prototypes]
 drivers/gpu/drm/rockchip/rockchip_rgb.c:159:6: warning: no previous prototype for ‘rockchip_rgb_fini’ [-Wmissing-prototypes]

Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-26-lee.jones@linaro.org